Pasar al contenido principal

GELES NANOCOMPUESTOS PARA LA PURIFICACION DE AGUAS MEDIANTE CALENTAMIENTO MAGNETICO

RTI2018-102006-J-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIO INSTITUT DE RECERCA DE L ENERGIA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Finite Element Investigation into the Cohesive Properties of Glass-Fiber-Reinforced Polymers with Nanostructured Interphases

  • Ghasemi Parizi, Mohammad J.
  • Shahverdi, Hossein
  • Pipelzadeh, Ehsan
  • Cabot, Andreu
  • Guardia, Pablo
Glass-fiber-reinforced polymer (GFRP) composites represent one of the most exploited composites due to their outstanding mechanical properties, light weight and ease of manufacture. However, one of the main limitations of GFRP composites is their weak inter-laminar properties. This leads to resin delamination and loss of mechanical properties. Here, a model based on finite element analysis (FEA) is introduced to predict the collective advantage that a GF surface modification has on the inter-laminar properties in GFRP composites. The developed model is validated with experimental pull-out tests performed on different samples. As such, modifications were introduced using different surface coatings. Interfacial shear stress (IFSS) for each sample as a function of the GF to polymer interphase was evaluated. Adhesion energy was found by assimilating the collected data into the model. The FE model reported here is a time-efficient and low-cost tool for the precise design of novel filler interphases in GFRP composites. This enables the further development of novel composites addressing delamination issues and the extension of their use in novel applications., This research was funded by the Spanish government (MICIU) and the Catalan Agency of Competitiveness (ACCIO) through the RTI2018-102006-J-I00, ENE2016-77798-C4-1-R and 2019-LLAV-00051 projects. P.G. acknowledges financial support from the Spanish government (MICIU) through the Ramon y Cajal research program (RyC2019-028414-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2−xS

  • Zhang, Yu
  • Xing, Congcong
  • Liu, Yu
  • Spadaro, Maria Chiara
  • Wang, Xiang
  • Li, Mengyao
  • Xiao, Ke
  • Zhang, Ting
  • Guardia, Pablo
  • Lim, Khak Ho
  • Ostovari Moghaddam, Ahmad
  • Llorca, Javier
  • Arbiol, Jordi
  • Ibáñez, María
  • Cabot, Andreu
Copper chalcogenides are outstanding thermoelectric materials for applications in the medium-high temperature range. Among different chalcogenides, while CuSe is characterized by higher thermoelectric figures of merit, CuS provides advantages in terms of low cost and element abundance. In the present work, we investigate the effect of different dopants to enhance the CuS performance and also its thermal stability. Among the tested options, Pb-doped CuS shows the highest improvement in stability against sulfur volatilization. Additionally, Pb incorporation allows tuning charge carrier concentration, which enables a significant improvement of the power factor. We demonstrate here that the introduction of an optimal additive amount of just 0.3% results in a threefold increase of the power factor in the middle-temperature range (500–800 K) and a record dimensionless thermoelectric figure of merit above 2 at 880 K., This work was supported by the European Regional Development Fund and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). MI acknowledges financial support from IST Austria. YL acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. YZ, CX, XW, KX and TZ thank the China Scholarship Council for the scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA program/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. M.C.S. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme. P.G. acknowledges financial support from the Spanish government (MICIU) through the RTI2018-102006-J-I00 project and the Catalan Agency of Competitiveness (ACCIO) through the TecnioSpring+ Marie Sklodowska-Curie action TECSPR16-1-0082. YZ and CX contributed equally to this work.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2-xS

  • Zhang, Yu|||0000-0002-0332-0013
  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yu|||0000-0001-7313-6740
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Wang, Xiang
  • Li, Mengyao|||0000-0002-9082-7938
  • Xiao, Ke
  • Zhang, Ting|||0000-0002-0317-9662
  • Guardia, Pablo|||0000-0001-9076-4642
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Moghaddam, Ahmad Ostovari
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Copper chalcogenides are outstanding thermoelectric materials for applications in the medium-high temperature range. Among different chalcogenides, while CuSe is characterized by higher thermoelectric figures of merit, CuS provides advantages in terms of low cost and element abundance. In the present work, we investigate the effect of different dopants to enhance the CuS performance and also its thermal stability. Among the tested options, Pb-doped CuS shows the highest improvement in stability against sulfur volatilization. Additionally, Pb incorporation allows tuning charge carrier concentration, which enables a significant improvement of the power factor. We demonstrate here that the introduction of an optimal additive amount of just 0.3% results in a threefold increase of the power factor in the middle-temperature range (500-800 K) and a record dimensionless thermoelectric figure of merit above 2 at 880 K.