Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lead sulfide nanocubes for solar energy storage

  • Lemsi, Amira
  • Cardenas-Morcoso, Drialys
  • Haro, Marta
  • Gil-Barrachina, Carlos
  • Aranda, Clara
  • Maghraoui-Meherzi, Hager
  • García-Tecedor, Miguel
  • Giménez, Sixto
  • Julián-López, Beatriz
Lead sulfide (PbS) nanocubes are produced by a very simple solvothermal procedure that uses a unique molecule, ethylenediamine, as solvent and capping ligand to control the size and shape of the nanocrystals. Detailed structural, optical, and photoelectrochemical evaluation confirms the suitability of these nanoparticles for photocapacitive applications, when synergistically combined with spin‐coated BiVO4 photoelectrodes, as derived from the estimated energy diagram. Furthermore, the p–n junction facilitates the photo‐oxidation of PbS nanoparticles under light irradiation. In the dark, the photogenerated charges are released providing an electric output response with a solar‐to‐current efficiency of 0.042%, storing extra energy to the H2 produced by water splitting when the BiVO4 photoanode works under illumination. Herein, the importance of the synthetic route and methodology to ensemble materials for advanced solar energy storage applications is highlighted., We acknowledge financial support from the Ministerio de Ciencia, Innovación y Universidades, Spain through the project number ENE2017‐85087‐C3‐1‐R and Ramon y Cajal Fellowship (grant no. RYC‐2018‐025222‐I). Universitat Jaume I is also acknowledged for funding (project UJI—B2018‐71). Université de Tunis El‐Manar also acknowledges the Tunisian Ministry of Higher Education and Scientific Research (MHESR) for the financial support of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perovskite solar cells take a step forward

  • Juárez-Pérez, Emilio J.
  • Haro, Marta
M.H. is supported by the MICIU (Spain) through a Ramon y Cajal Fellowship (grant RYC-2018-025222-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nano-vault architecture mitigates stress in silicon-based anodes for lithium-ion batteries

  • Haro, Marta
  • Kumar, Pawan
  • Zhao, Junlei
  • Koutsogiannis, Panagiotis
  • Porkovich, Alexander James
  • Ziadi, Zakaria
  • Bouloumis, Theodoros
  • Singh, Vidyadhar
  • Juárez-Pérez, Emilio J.
  • Toulkeridou, Evropi
  • Nordlund, Kai
  • Djurabekova, Flyura
  • Sowwan, Mukhles
  • Grammatikopoulos, Panagiotis
This work was supported by funding from the Okinawa Institute of Science and Technology Graduate University (OIST). The Finnish IT Center for Science (CSC) and the Center for Computational Science and Engineering at SUSTech provided computational resources. MH acknowledges financial support from the MICINN (Spain) through the Ramon y Cajal Fellowship (Grant no. RYC-2018-025222-I) and PID2019-108247RA-I00. The authors acknowledge Nan Jian for TEM measurements, Steven D Aird for editing advice during paper preparation, Pavel Puchenkov for the 3D schematic of the experimental setup and Noriko Ishizu from OIST Mech. Eng. & Microfabrication Support Section for XPS measurements and analysis support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw-Ndiaye, Fatou
  • Furgeaud, Clarisse
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
13 figures, 6 tables.-- Supplementary information available., Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells., E.J.J-P acknowledges the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). M.H. acknowledges the funding support from MCIN/AEI/10.13039/501100011033 for the Ramón y Cajal fellowship (RYC-2018-025222-I) and the project PID2019-108247RA-I00. R.A. acknowledges funding from the Spanish MICINN (project grant PID2019-104739 GB-100/AEI/10.13039/501100011033). RA also acknowledge to Government of Aragon (project DGA E13-20R (FEDER, EU)) and European Union H2020 program “ESTEEM3” (823717). A.A-C acknowledges financial support from Spanish MCIN/AEI/10.13039/501100011033 under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of triphenylene-based MOF ultrathin films for lithium batteries

  • Ciria-Ramos, Isabel
  • Tejedor, Inés
  • Caparros, Lucía
  • Doñagueda, Beatriz
  • Lacruz, Oscar
  • Urtizberea, Ainhoa
  • Roubeau, Olivier
  • Gascón, Ignacio
  • Haro, Marta
Metal–organic frameworks (MOFs) are attractive candidates to meet the requirement of next-generation batteries, as functional materials with a high surface area, well-defined metal centers, and organic linkers through coordination bonds. Due to their great tunability, MOFs have been investigated as electrodes or electrolytes in lithium batteries and more recently as protective layers in anode-less batteries. Here, we synthesize a Ni3(HHTP)2 MOF directly at the air–liquid interface of a Langmuir trough and grow the electrode on a conductive substrate by the transference process. The characterization during Langmuir film formation shows that the addition of crystallization time during the compression process enhances the formation of 2D crystalline domains, as observed by in situ grazing-incidence X-ray diffraction. Next, the transferred Ni3(HHTP)2 ultrathin films were studied as working electrodes in Li batteries in a half-cell configuration and compared with bare copper. The results show that the Ni3(HHTP)2 film protects the Cu collector from oxidation, and the negative charge accumulates in the organic ligand during the lithiation process while NiII oxidizes to NiIII, unlike other triphenylene-based MOFs with CuII or CoII metal nodes. The galvanostatic plating–stripping cycles of the batteries show that the inclusion of the crystallization time improves the coulombic efficiency, especially significantly in the first cycles when the SEI is formed. This work shows the Langmuir technique as a useful tool to test MOF based materials for batteries with the advantages of using a low amount of raw materials and without the need to introduce additives (binder and electron conductor) in the electrodes. The electrochemical study of this type of electrode allows a first screening to synthesize electrodes based on MOFs and can be a tool for the preparation of protective coatings under optimized conditions., The authors acknowledge the DGA/fondos FEDER (construyendo Europa desde Aragón) for funding the research group Platon (E31_20R) and the project LMP71_21. This work was also funded by MCIN/AEI/10.13039/501100011033 and ERDF “A way of making Europe” (PID2019-108247RA-I00 and PID2019-105881RB-I00). M. H. acknowledges the funding support from MCIN/AEI/10.13039/501100011033 for the Ramón y Cajal fellowship (RYC-2018-025222-I). I. T. gratefully acknowledges her DGA PhD fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar energy storage using a Cu2O-TiO2 photocathode in a lithium battery

  • Ciria-Ramos, Isabel
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
A Cu2O-TiO2 photoelectrode is pr+oposed for simultaneous solar light energy harvesting and storing of electrochemical energy in an adapted lithium coin cell. The p-type Cu2O semiconductor layer is the light harvester component of the photoelectrode and the TiO2 film performs as the capacitive layer. The rationale of the energy scheme shows that the photocharges generated in the Cu2O semiconductor induce lithiation/delithiation processes in the TiO2 film as a function of the applied bias voltage and light power. A photorechargeable lithium button cell drilled on one side recharges with visible white light in ≈9 h in open circuit. It provides an energy density of ≈150 mAh g−1 at 0.1 C discharge current in dark, and the overall efficiency is 0.29%. This work draws a new approach for the photoelectrode role to advance in monolithic rechargeable batteries., M.H. acknowledges the funding support from MCIN/ AEI/10.13039/501100011033 and European Union "ESF Investing in your future" for the Ramón y Cajal fellowship (RYC2018-025222-I) and the project PID2019-108247RA-I00. E.J.J.-P. acknowledges the funding support from MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/ PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). The authors also acknowledge the Diputación General de Aragón under the projects LMP71_21, E31_20R (M.H. and I.C.-R.) and T57_20R (E.J.J.-P.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced power-point tracking for high-hysteresis perovskite solar cells with a galvanostatic approach

  • Juárez-Pérez, Emilio J.
  • Momblona, Cristina
  • Casas, Roberto
  • Haro, Marta
Harnessing the untapped potential of solar energy sources is crucial for achieving a sustainable future, and accurate maximum-power-point tracking of solar cells is vital to maximizing their power generation. This article introduces a power-tracking algorithm and cost-effective hardware for long-term operational stability measurements in perovskite solar cells. Existing algorithms for photovoltaic technology lead to suboptimal performance when applied to the most stable perovskite devices (for example, triple-mesoscopic hole-transport-material-free metal halide perovskite solar cells). To address this challenge, we developed a low-cost hardware solution for research purposes that enables concurrent long-term stability measurements in parallel with a galvanostatic-type power-tracking algorithm, ensuring superior operational performance for high-hysteresis perovskite solar cells. The suggested enhancements bear significant implications for the extensive integration of perovskite solar-cell technologies, particularly those dependent on power-optimizer devices., Authors acknowledge the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR for project grants PID2022-140516OB-I00 (E.J.J.-P. and M.H.), PID2019-107893RB-I00 (E.J.J.-P.), PID2020-116011RB-C22 (R.C.), EIN2020-112315 (E.J.J.-P.), and PID2019-108247RA-I00 (M.H.) and fellowships from Ramón y Cajal (RYC-2018-025222-I; M.H.) and Juan de la Cierva Incorporación (IJC-2020-044684-I; C.M.) Also, authors acknowledge the funding support from the Aragon Regional Government for the Program for Research Groups under grant: T57_23R (E.J.J.-P. and C.M.), E31_20R (M.H.), and T27_23R (R.C.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes., E. J. J.-P. and M. H. acknowledge the funding support from MCIN/AEI/10.13039/501100011033 for the project grant PID2022-140516OB-I00, E. J. J.-P. for the project grant PID2019-107893RB-I00, and M. H. for CNS2023-145197, PID2019-108247RA-I00, and her Ramón y Cajal fellowship (RYC-2018-025222-I). M. H, I. C.-R and E. J. J-P acknowledge the Diputación General de Aragón for projects E31_23R (M. H and I. C.-R.) and T57_23R (E. J. J.-P.). A. M. acknowledges the Spanish ministry of Science and Universities (RYC2018-024561-I, CNS2023-144346), and the Gobierno de Aragón (Nanomidas group, E13_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protocol for building and using a maximum power point output tracker for perovskite solar cells

  • Sanz-Marco, Arturo
  • Jeronimo-Cruz, Rodrigo
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
We recently developed a galvanostatic maximum power point output (MPPT) algorithm for high-hysteresis perovskite solar cells (PSCs), enabling continuous and precise power tracking. Here, we present a protocol for assembling the tracker, implementing the algorithm on a microcontroller, and conducting JV scans and stabilized output power (SOP) or traditional perturb and observe (P&O) tracking for small-area photovoltaic cells. We also describe steps for collecting, storing, and plotting data and explain the device’s operational modes and functions., The authors acknowledge the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR for project grants PID2022-140516OB-I00 (E.J.J.-P. and M.H.), PID2019-107893RB-I00 (E.J.J.-P.), EIN2020-112315 (E.J.J.-P.), and PID2019-108247RA-I00 (M.H.); a Ramón y Cajal fellowship (RYC-2018-025222-I; M.H.); and CPP2022-009766 (E.J.J.-P., A.S.-M., and R.J.-C.). Also, the authors acknowledge the funding support from the Aragon Regional Government for the Program for Research Groups under grants T57_23R (E.J.J.-P., A.S.-M., and R.J.-C.) and E31_20R (M.H.) and CIBER-BBN, ICTS “NANBIOSIS” (E.J.J.-P., A.S.-M., and R.J.-C.)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Lead Sulfide Nanocubes for Solar Energy Storage

  • Lemsi, A.
  • Cardenas-Morcoso, D.
  • Haro, M.
  • Gil-Barrachina, C.
  • Aranda, C.
  • Maghraoui-Meherzi, H.
  • García-Tecedor, M.
  • Giménez, S.
  • Julián-López, B.
Lead sulfide (PbS) nanocubes are produced by a very simple solvothermal procedure that uses a unique molecule, ethylenediamine, as solvent and capping ligand to control the size and shape of the nanocrystals. Detailed structural, optical, and photoelectrochemical evaluation confirms the suitability of these nanoparticles for photocapacitive applications, when synergistically combined with spin-coated BiVO4 photoelectrodes, as derived from the estimated energy diagram. Furthermore, the p–n junction facilitates the photo-oxidation of PbS nanoparticles under light irradiation. In the dark, the photogenerated charges are released providing an electric output response with a solar-to-current efficiency of 0.042%, storing extra energy to the H2 produced by water splitting when the BiVO4 photoanode works under illumination. Herein, the importance of the synthetic route and methodology to ensemble materials for advanced solar energy storage applications is highlighted.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Solar energy storage using a Cu2O-TiO photocathode in a lithium battery

  • Ciria-Ramos, Isabel
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A Cu2O-TiO2 photoelectrode is pr+oposed for simultaneous solar light energy harvesting and storing of electrochemical energy in an adapted lithium coin cell. The p-type Cu2O semiconductor layer is the light harvester component of the photoelectrode and the TiO2 film performs as the capacitive layer. The rationale of the energy scheme shows that the photocharges generated in the Cu2O semiconductor induce lithiation/delithiation processes in the TiO2 film as a function of the applied bias voltage and light power. A photorechargeable lithium button cell drilled on one side recharges with visible white light in ≈9 h in open circuit. It provides an energy density of ≈150 mAh g−1 at 0.1 C discharge current in dark, and the overall efficiency is 0.29%. This work draws a new approach for the photoelectrode role to advance in monolithic rechargeable batteries.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluation of triphenylene-based MOF ultrathin films for lithium batteries

  • Ciria-Ramos, Isabel
  • Tejedor, Inés
  • Caparros, Lucía
  • Doñagueda, Beatriz
  • Lacruz, Oscar
  • Urtizberea, Ainhoa
  • Roubeau, Olivier
  • Gascón, Ignacio
  • Haro, Marta
Metal–organic frameworks (MOFs) are attractive candidates to meet the requirement of next-generation batteries, as functional materials with a high surface area, well-defined metal centers, and organic linkers through coordination bonds. Due to their great tunability, MOFs have been investigated as electrodes or electrolytes in lithium batteries and more recently as protective layers in anode-less batteries. Here, we synthesize a Ni3(HHTP)2 MOF directly at the air–liquid interface of a Langmuir trough and grow the electrode on a conductive substrate by the transference process. The characterization during Langmuir film formation shows that the addition of crystallization time during the compression process enhances the formation of 2D crystalline domains, as observed by in situ grazing-incidence X-ray diffraction. Next, the transferred Ni3(HHTP)2 ultrathin films were studied as working electrodes in Li batteries in a half-cell configuration and compared with bare copper. The results show that the Ni3(HHTP)2 film protects the Cu collector from oxidation, and the negative charge accumulates in the organic ligand during the lithiation process while NiII oxidizes to NiIII, unlike other triphenylene-based MOFs with CuII or CoII metal nodes. The galvanostatic plating–stripping cycles of the batteries show that the inclusion of the crystallization time improves the coulombic efficiency, especially significantly in the first cycles when the SEI is formed. This work shows the Langmuir technique as a useful tool to test MOF based materials for batteries with the advantages of using a low amount of raw materials and without the need to introduce additives (binder and electron conductor) in the electrodes. The electrochemical study of this type of electrode allows a first screening to synthesize electrodes based on MOFs and can be a tool for the preparation of protective coatings under optimized conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw, Fatou
  • Furgeaud, Clarisse
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced power-point tracking for high-hysteresis perovskite solar cells with a galvanostatic approach

  • Juarez-Perez, Emilio J.
  • Momblona, Cristina
  • Casas, Roberto
  • Haro, Marta
Harnessing the untapped potential of solar energy sources is crucial for achieving a sustainable future, and accurate maximum-power-point tracking of solar cells is vital to maximizing their power generation. This article introduces a power-tracking algorithm and cost-effective hardware for long-term operational stability measurements in perovskite solar cells. Existing algorithms for photovoltaic technology lead to suboptimal performance when applied to the most stable perovskite devices (for example, triple-mesoscopic hole-transport-material-free metal halide perovskite solar cells). To address this challenge, we developed a low-cost hardware solution for research purposes that enables concurrent long-term stability measurements in parallel with a galvanostatic-type power-tracking algorithm, ensuring superior operational performance for high-hysteresis perovskite solar cells. The suggested enhancements bear significant implications for the extensive integration of perovskite solar-cell technologies, particularly those dependent on power-optimizer devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nano-vault architecture mitigates stress in silicon-based anodes for lithium-ion batteries

  • Haro, M.
  • Kumar, P.
  • Zhao, J.L.
  • Koutsogiannis, P.
  • Porkovich, A.J.
  • Ziadi, Z.
  • Bouloumis, T.
  • Singh, V.
  • Juarez-Perez, E.J.
  • Toulkeridou, E.
  • Nordlund, K.
  • Djurabekova, F.
  • Sowwan, M.
  • Grammatikopoulos, P.
Nanomaterials undergoing cyclic swelling-deswelling benefit from inner void spaces that help accommodate significant volumetric changes. Such flexibility, however, typically comes at a price of reduced mechanical stability, which leads to component deterioration and, eventually, failure. Here, we identify an optimised building block for silicon-based lithium-ion battery (LIB) anodes, fabricate it with a ligand- and effluent-free cluster beam deposition method, and investigate its robustness by atomistic computer simulations. A columnar amorphous-silicon film was grown on a tantalum-nanoparticle scaffold due to its shadowing effect. PeakForce quantitative nanomechanical mapping revealed a critical change in mechanical behaviour when columns touched forming a vaulted structure. The resulting maximisation of measured elastic modulus (similar to 120GPa) is ascribed to arch action, a well-known civil engineering concept. The vaulted nanostructure displays a sealed surface resistant to deformation that results in reduced electrode-electrolyte interface and increased Coulombic efficiency. More importantly, its vertical repetition in a double-layered aqueduct-like structure improves both the capacity retention and Coulombic efficiency of the LIB. Lithiation of anodes during cycling of lithium-ion batteries generates stresses that reduce operation lifetime. Here, a composite silicon-based anode with a nanoscale vaulted architecture shows high mechanical stability and electrochemical performance in a lithium-ion battery.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Protocol for building and using a maximum power point output tracker for perovskite solar cells

  • Sanz-Marco, Arturo
  • Jerónimo-Cruz, Rodrigo
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
We recently developed a galvanostatic maximum power point output (MPPT) algorithm for high-hysteresis perovskite solar cells (PSCs), enabling continuous and precise power tracking. Here, we present a protocol for assembling the tracker, implementing the algorithm on a microcontroller, and conducting JV scans and stabilized output power (SOP) or traditional perturb and observe (P&O) tracking for small-area photovoltaic cells. We also describe steps for collecting, storing, and plotting data and explain the device’s operational modes and functions. For complete details on the use and execution of this protocol, please refer to Juarez-Perez et al.