Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw-Ndiaye, Fatou
  • Furgeaud, Clarisse
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
13 figures, 6 tables.-- Supplementary information available., Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells., E.J.J-P acknowledges the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). M.H. acknowledges the funding support from MCIN/AEI/10.13039/501100011033 for the Ramón y Cajal fellowship (RYC-2018-025222-I) and the project PID2019-108247RA-I00. R.A. acknowledges funding from the Spanish MICINN (project grant PID2019-104739 GB-100/AEI/10.13039/501100011033). RA also acknowledge to Government of Aragon (project DGA E13-20R (FEDER, EU)) and European Union H2020 program “ESTEEM3” (823717). A.A-C acknowledges financial support from Spanish MCIN/AEI/10.13039/501100011033 under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar energy storage using a Cu2O-TiO2 photocathode in a lithium battery

  • Ciria-Ramos, Isabel
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
A Cu2O-TiO2 photoelectrode is pr+oposed for simultaneous solar light energy harvesting and storing of electrochemical energy in an adapted lithium coin cell. The p-type Cu2O semiconductor layer is the light harvester component of the photoelectrode and the TiO2 film performs as the capacitive layer. The rationale of the energy scheme shows that the photocharges generated in the Cu2O semiconductor induce lithiation/delithiation processes in the TiO2 film as a function of the applied bias voltage and light power. A photorechargeable lithium button cell drilled on one side recharges with visible white light in ≈9 h in open circuit. It provides an energy density of ≈150 mAh g−1 at 0.1 C discharge current in dark, and the overall efficiency is 0.29%. This work draws a new approach for the photoelectrode role to advance in monolithic rechargeable batteries., M.H. acknowledges the funding support from MCIN/ AEI/10.13039/501100011033 and European Union "ESF Investing in your future" for the Ramón y Cajal fellowship (RYC2018-025222-I) and the project PID2019-108247RA-I00. E.J.J.-P. acknowledges the funding support from MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/ PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). The authors also acknowledge the Diputación General de Aragón under the projects LMP71_21, E31_20R (M.H. and I.C.-R.) and T57_20R (E.J.J.-P.)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Atomic-level understanding of a formamidinium hybrid halide perovskite, FAPbBr<sub>3</sub>

  • Li, Chengmin
  • Juarez-Perez, Emilio J.
  • Mayoral, Alvaro
Herein, we show how electron microscopy can provide atomic-level understanding of FAPbBr3 , where electron diffraction and high-resolution imaging were combined allowing not only the characterization of the pristine material but also the identification of different intermediates upon its structural disintegration. Additionally, a minor tetragonal phase was also identified whose structure was also solved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Solar energy storage using a Cu2O-TiO photocathode in a lithium battery

  • Ciria-Ramos, Isabel
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A Cu2O-TiO2 photoelectrode is pr+oposed for simultaneous solar light energy harvesting and storing of electrochemical energy in an adapted lithium coin cell. The p-type Cu2O semiconductor layer is the light harvester component of the photoelectrode and the TiO2 film performs as the capacitive layer. The rationale of the energy scheme shows that the photocharges generated in the Cu2O semiconductor induce lithiation/delithiation processes in the TiO2 film as a function of the applied bias voltage and light power. A photorechargeable lithium button cell drilled on one side recharges with visible white light in ≈9 h in open circuit. It provides an energy density of ≈150 mAh g−1 at 0.1 C discharge current in dark, and the overall efficiency is 0.29%. This work draws a new approach for the photoelectrode role to advance in monolithic rechargeable batteries.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw, Fatou
  • Furgeaud, Clarisse
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced power-point tracking for high-hysteresis perovskite solar cells with a galvanostatic approach

  • Juarez-Perez, Emilio J.
  • Momblona, Cristina
  • Casas, Roberto
  • Haro, Marta
Harnessing the untapped potential of solar energy sources is crucial for achieving a sustainable future, and accurate maximum-power-point tracking of solar cells is vital to maximizing their power generation. This article introduces a power-tracking algorithm and cost-effective hardware for long-term operational stability measurements in perovskite solar cells. Existing algorithms for photovoltaic technology lead to suboptimal performance when applied to the most stable perovskite devices (for example, triple-mesoscopic hole-transport-material-free metal halide perovskite solar cells). To address this challenge, we developed a low-cost hardware solution for research purposes that enables concurrent long-term stability measurements in parallel with a galvanostatic-type power-tracking algorithm, ensuring superior operational performance for high-hysteresis perovskite solar cells. The suggested enhancements bear significant implications for the extensive integration of perovskite solar-cell technologies, particularly those dependent on power-optimizer devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Protocol for building and using a maximum power point output tracker for perovskite solar cells

  • Sanz-Marco, Arturo
  • Jerónimo-Cruz, Rodrigo
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
We recently developed a galvanostatic maximum power point output (MPPT) algorithm for high-hysteresis perovskite solar cells (PSCs), enabling continuous and precise power tracking. Here, we present a protocol for assembling the tracker, implementing the algorithm on a microcontroller, and conducting JV scans and stabilized output power (SOP) or traditional perturb and observe (P&O) tracking for small-area photovoltaic cells. We also describe steps for collecting, storing, and plotting data and explain the device’s operational modes and functions. For complete details on the use and execution of this protocol, please refer to Juarez-Perez et al.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A modified equation analysis for immersed boundary methods based on volume penalization: Applications to linear advection–diffusion equations and high-order discontinuous Galerkin schemes

  • Llorente, Victor J.
  • Kou, Jiaqing
  • Valero, Eusebio
  • Ferrer, Esteban
The Immersed Boundary Method (IBM) is a popular numerical approach to impose boundary conditions without relying on body-fitted grids, thus reducing the costly effort of mesh generation. To obtain enhanced accuracy, IBM can be combined with high-order methods (e.g., discontinuous Galerkin). For this combination to be effective, an analysis of the numerical errors is essential. In this work, we apply, for the first time, a modified equation analysis to the combination of IBM (based on volume penalization) and high-order methods (based on nodal discontinuous Galerkin methods) to analyze a priori numerical errors and obtain practical guidelines on the selection of IBM parameters. The analysis is performed on a linear advection–diffusion equation with Dirichlet boundary conditions. Three ways to penalize the immersed boundary are considered, the first penalizes the solution inside the IBM region (classic approach), whilst the second and third penalize the first and second derivatives of the solution. We find optimal combinations of the penalization parameters, including the first and second penalizing derivatives, resulting in minimum errors. We validate the theoretical analysis with numerical experiments for one- and two-dimensional advection–diffusion equations