Pasar al contenido principal

DISEÑO DE ELECTRODOS DE HALURO DE PEROVSKITA Y MOF PARA BATERIAS SOLARES FOTORECARGABLES EN UN DISPOSITIVO INTEGRADO

PID2022-140516OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced power-point tracking for high-hysteresis perovskite solar cells with a galvanostatic approach

  • Juárez-Pérez, Emilio J.
  • Momblona, Cristina
  • Casas, Roberto
  • Haro, Marta
Harnessing the untapped potential of solar energy sources is crucial for achieving a sustainable future, and accurate maximum-power-point tracking of solar cells is vital to maximizing their power generation. This article introduces a power-tracking algorithm and cost-effective hardware for long-term operational stability measurements in perovskite solar cells. Existing algorithms for photovoltaic technology lead to suboptimal performance when applied to the most stable perovskite devices (for example, triple-mesoscopic hole-transport-material-free metal halide perovskite solar cells). To address this challenge, we developed a low-cost hardware solution for research purposes that enables concurrent long-term stability measurements in parallel with a galvanostatic-type power-tracking algorithm, ensuring superior operational performance for high-hysteresis perovskite solar cells. The suggested enhancements bear significant implications for the extensive integration of perovskite solar-cell technologies, particularly those dependent on power-optimizer devices., Authors acknowledge the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR for project grants PID2022-140516OB-I00 (E.J.J.-P. and M.H.), PID2019-107893RB-I00 (E.J.J.-P.), PID2020-116011RB-C22 (R.C.), EIN2020-112315 (E.J.J.-P.), and PID2019-108247RA-I00 (M.H.) and fellowships from Ramón y Cajal (RYC-2018-025222-I; M.H.) and Juan de la Cierva Incorporación (IJC-2020-044684-I; C.M.) Also, authors acknowledge the funding support from the Aragon Regional Government for the Program for Research Groups under grant: T57_23R (E.J.J.-P. and C.M.), E31_20R (M.H.), and T27_23R (R.C.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes., E. J. J.-P. and M. H. acknowledge the funding support from MCIN/AEI/10.13039/501100011033 for the project grant PID2022-140516OB-I00, E. J. J.-P. for the project grant PID2019-107893RB-I00, and M. H. for CNS2023-145197, PID2019-108247RA-I00, and her Ramón y Cajal fellowship (RYC-2018-025222-I). M. H, I. C.-R and E. J. J-P acknowledge the Diputación General de Aragón for projects E31_23R (M. H and I. C.-R.) and T57_23R (E. J. J.-P.). A. M. acknowledges the Spanish ministry of Science and Universities (RYC2018-024561-I, CNS2023-144346), and the Gobierno de Aragón (Nanomidas group, E13_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protocol for building and using a maximum power point output tracker for perovskite solar cells

  • Sanz-Marco, Arturo
  • Jeronimo-Cruz, Rodrigo
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
We recently developed a galvanostatic maximum power point output (MPPT) algorithm for high-hysteresis perovskite solar cells (PSCs), enabling continuous and precise power tracking. Here, we present a protocol for assembling the tracker, implementing the algorithm on a microcontroller, and conducting JV scans and stabilized output power (SOP) or traditional perturb and observe (P&O) tracking for small-area photovoltaic cells. We also describe steps for collecting, storing, and plotting data and explain the device’s operational modes and functions., The authors acknowledge the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR for project grants PID2022-140516OB-I00 (E.J.J.-P. and M.H.), PID2019-107893RB-I00 (E.J.J.-P.), EIN2020-112315 (E.J.J.-P.), and PID2019-108247RA-I00 (M.H.); a Ramón y Cajal fellowship (RYC-2018-025222-I; M.H.); and CPP2022-009766 (E.J.J.-P., A.S.-M., and R.J.-C.). Also, the authors acknowledge the funding support from the Aragon Regional Government for the Program for Research Groups under grants T57_23R (E.J.J.-P., A.S.-M., and R.J.-C.) and E31_20R (M.H.) and CIBER-BBN, ICTS “NANBIOSIS” (E.J.J.-P., A.S.-M., and R.J.-C.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Progress in integrated photo-rechargeable battery technologies

  • Abellán, Manuel
  • Ciria-Ramos, Isabel
  • Gascón, Ignacio
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
Integrated photo-rechargeable battery systems represent a significant advancement in sustainable energy storage and conversion by combining photovoltaic energy harvesting with direct energy storage in a compact design. Although initially studied in the 1970s, interest in this field has surged in recent years. Due to the multidisciplinary nature of this topic, researchers from diverse backgrounds approach it with varying methodologies, resulting in highly diverse cell designs and inconsistent performance metrics. These variations complicate the comparison and evaluation of system efficiency and functionality. This review presents a comprehensive overview of the field's development and current state, from early photoelectrochemical approaches to modern integrated designs. Additionally, it addresses the challenge of performance evaluation by compiling current approaches to performance measurement and proposing standardized evaluation parameters under defined conditions. This dual focus on field overview and metrics standardization aims to provide both a thorough understanding of solar electrochemical energy storage technologies and a framework for their consistent evaluation, which is critical for advancing these technologies., The authors acknowlege the project PID2022-140516OB-I00 funded by MICIU/AEI 10.13039/501100011033 and FEDER, EU. M. H. also acknowledges the project CNS2023-145197 funded by MICIU/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Operando Raman and ex situ characterization of an iron-based conductive MOF as a negative electrode in Li-ion batteries

  • Ciria-Ramos, Isabel
  • Neale, Alex R.
  • Hardwick, Laurence J.
  • Juárez-Pérez, Emilio J.
  • Gascón, Ignacio
  • Haro, Marta
The data that support the findings of this study are available from the corresponding author upon reasonable request., An iron-based electrically conductive metal–organic framework (MOF), Fe-HHTP, formed by the coordination of Fe cations and the organic ligand HHTP (2,3,6,7,10,11-hexahydroxytriphenylene), has been synthesized, characterized, and explored as a potential negative electrode for lithium-ion batteries (LIBs). Galvanostatic cycling experiments, with a lower cut-off voltage of 0.1 V vs. Li/Li+, reveal that Fe-HHTP undergoes a significant activation process, resulting in an increase in specific capacity up to 1142 mAh g−1 after ∼220 cycles at a current of 355 mA g−1. Operando Raman spectroscopy during the first lithiation, complemented by ex situ techniques at different cycling stages, demonstrates that both the organic ligands and metal centers actively contribute to Li+ storage. Initially, lithiation occurs primarily at the MOF boundaries, while continuous cycling induces a structural transformation that allows greater accessibility to the inner regions of Fe-HHTP. These results provide a better understanding of the electrochemical and structural behavior of pristine MOFs that allow tailoring their properties for direct application in energy storage devices without the need for high-temperature processes., I. C.-R. acknowledges Programa Ibercaja-CAI de Estancias de Investigación (reference number CB 5/24). M. H. and E. J. J.-P. acknowledge the project CPP2022-009766 funded by MICIU/AEI/10.13039/501100011033 and NextGenerationEU/PRTR. M. H. acknowledges the project CNS2023-14197, funded by MICIU/AEI/10.13039/501100011033, and, “ESF Investing in your future” and the European Union NextGenerationEU/PRTR. I. C.-R., E. J. J.-P., M. H. and I. G. acknowledge the projects PID2022-140516OB-I00 and CEX2023-001286-S funded by MCICIU/AEI/10.13039/501100011033 and FEDER, UE. L. H. and A. N. acknowledge UK Faraday Institution (EPSRC EP/S003053/1) through the degradation project (grant number FIRG024). I. C.-R., I. G. and M. H. acknowledge financial support from the Aragón Government (PLATON E31_23R). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bromine-functionalized carbazole derivatives in perovskite precursors: defect passivation for enhanced perovskite photovoltaics

  • Cao, Qianwen
  • Wu, Lifang
  • Wang, Ye
  • Liu, Xiaojiao
  • Xu, Tenglong
  • Xiao, Qiling
  • Xue, Chang
  • Zou, Xingli
  • Wu, Tianhao
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
  • Donaev, S. B.
  • Wang, Shenghao
Carbazole phosphonic acid self-assembled monolayers (SAMs) have emerged as an effective strategy to enhance the performance of perovskite solar cells (PSCs) via interface engineering. While previous studies have mainly focused on their application at the hole transport layer (HTL), their roles within the perovskite layer itself remain underexplored. In this work, two carbazole-based SAM molecules, 2-(9H-carbazol-9-yl)ethylphosphonic acid (2PACz) and 2-(3,6-dibromo-9H-carbazol-9-yl)ethylphosphonic acid (Br-2PACz), were directly incorporated into perovskite precursors to investigate their influence on film formation and electronic structure. Compared with the control film, the incorporation of both 2PACz and Br-2PACz improved film uniformity and morphology, and significantly prolonged carrier lifetimes, indicating suppressed non-radiative recombination and reduced defect density. Notably, Br-2PACz shows a more pronounced effect: the bromine substituent enhances the electron-withdrawing character of the molecule, leading to a deeper highest occupied molecular orbital (HOMO) level and pronounced modulation of the interfacial electronic structure. As a result, the energy-level alignment at the perovskite/electron-transport interface is optimized, facilitating charge extraction and defect passivation. These synergistic effects contribute to higher power conversion efficiency (PCE). This work demonstrates an additive-engineering approach based on carbazole SAMs to control perovskite crystallization and interfacial energetics, providing a promising pathway toward high-efficiency PSCs., This work is supported by the National Natural Science Foundation of China (12474072). E. J. J.-P. and M. H. acknowledge the project PID2022-140516OB-I00 funded by MCICIU/AEI/10.13039/501100011033 and FEDER, UE., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced power-point tracking for high-hysteresis perovskite solar cells with a galvanostatic approach

  • Juarez-Perez, Emilio J.
  • Momblona, Cristina
  • Casas, Roberto
  • Haro, Marta
Harnessing the untapped potential of solar energy sources is crucial for achieving a sustainable future, and accurate maximum-power-point tracking of solar cells is vital to maximizing their power generation. This article introduces a power-tracking algorithm and cost-effective hardware for long-term operational stability measurements in perovskite solar cells. Existing algorithms for photovoltaic technology lead to suboptimal performance when applied to the most stable perovskite devices (for example, triple-mesoscopic hole-transport-material-free metal halide perovskite solar cells). To address this challenge, we developed a low-cost hardware solution for research purposes that enables concurrent long-term stability measurements in parallel with a galvanostatic-type power-tracking algorithm, ensuring superior operational performance for high-hysteresis perovskite solar cells. The suggested enhancements bear significant implications for the extensive integration of perovskite solar-cell technologies, particularly those dependent on power-optimizer devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Protocol for building and using a maximum power point output tracker for perovskite solar cells

  • Sanz-Marco, Arturo
  • Jerónimo-Cruz, Rodrigo
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
We recently developed a galvanostatic maximum power point output (MPPT) algorithm for high-hysteresis perovskite solar cells (PSCs), enabling continuous and precise power tracking. Here, we present a protocol for assembling the tracker, implementing the algorithm on a microcontroller, and conducting JV scans and stabilized output power (SOP) or traditional perturb and observe (P&O) tracking for small-area photovoltaic cells. We also describe steps for collecting, storing, and plotting data and explain the device’s operational modes and functions. For complete details on the use and execution of this protocol, please refer to Juarez-Perez et al.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Progress in integrated photo-rechargeable battery technologies

  • Abellán, Manuel
  • Ciria-Ramos, Isabel
  • Gascón, Ignacio
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Integrated photo-rechargeable battery systems represent a significant advancement in sustainable energy storage and conversion by combining photovoltaic energy harvesting with direct energy storage in a compact design. Although initially studied in the 1970s, interest in this field has surged in recent years. Due to the multidisciplinary nature of this topic, researchers from diverse backgrounds approach it with varying methodologies, resulting in highly diverse cell designs and inconsistent performance metrics. These variations complicate the comparison and evaluation of system efficiency and functionality. This review presents a comprehensive overview of the field's development and current state, from early photoelectrochemical approaches to modern integrated designs. Additionally, it addresses the challenge of performance evaluation by compiling current approaches to performance measurement and proposing standardized evaluation parameters under defined conditions. This dual focus on field overview and metrics standardization aims to provide both a thorough understanding of solar electrochemical energy storage technologies and a framework for their consistent evaluation, which is critical for advancing these technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Operando Raman and ex situ characterization of an iron-based conductive MOF as a negative electrode in Li-ion batteries

  • Ciria-Ramos, Isabel
  • Neale, Alex R.
  • Hardwick, Laurence J.
  • Juarez-Perez, Emilio J.
  • Gascón, Ignacio
  • Haro, Marta
An iron-based electrically conductive metal–organic framework (MOF), Fe-HHTP, formed by the coordination of Fe cations and the organic ligand HHTP (2,3,6,7,10,11-hexahydroxytriphenylene), has been synthesized, characterized, and explored as a potential negative electrode for lithium-ion batteries (LIBs). Galvanostatic cycling experiments, with a lower cut-off voltage of 0.1 V vs. Li/Li+, reveal that Fe-HHTP undergoes a significant activation process, resulting in an increase in specific capacity up to 1142 mAh g−1 after ∼220 cycles at a current of 355 mA g−1. Operando Raman spectroscopy during the first lithiation, complemented by ex situ techniques at different cycling stages, demonstrates that both the organic ligands and metal centers actively contribute to Li+ storage. Initially, lithiation occurs primarily at the MOF boundaries, while continuous cycling induces a structural transformation that allows greater accessibility to the inner regions of Fe-HHTP. These results provide a better understanding of the electrochemical and structural behavior of pristine MOFs that allow tailoring their properties for direct application in energy storage devices without the need for high-temperature processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bromine-functionalized carbazole derivatives in perovskite precursors: defect passivation for enhanced perovskite photovoltaics

  • Cao, Qianwen
  • Wu, Lifang
  • Wang, Ye
  • Li, Hengji
  • Liu, Xiaojie
  • Xu, Tenglong
  • Xiao, Qiling
  • Xue, Chang
  • Zou, Xingli
  • Wu, Tianhao
  • Juarez-Perez, Emilio J.
  • Haro, Marta
  • Donaev, S. B.
  • Wang, Shenghao
Carbazole phosphonic acid self-assembled monolayers (SAMs) have emerged as an effective strategy to enhance the performance of perovskite solar cells (PSCs) via interface engineering. While previous studies have mainly focused on their application at the hole transport layer (HTL), their roles within the perovskite layer itself remain underexplored. In this work, two carbazole-based SAM molecules, 2-(9H-carbazol-9-yl)ethylphosphonic acid (2PACz) and 2-(3,6-dibromo-9H-carbazol-9-yl)ethylphosphonic acid (Br-2PACz), were directly incorporated into perovskite precursors to investigate their influence on film formation and electronic structure. Compared with the control film, the incorporation of both 2PACz and Br-2PACz improved film uniformity and morphology, and significantly prolonged carrier lifetimes, indicating suppressed non-radiative recombination and reduced defect density. Notably, Br-2PACz shows a more pronounced effect: the bromine substituent enhances the electron-withdrawing character of the molecule, leading to a deeper highest occupied molecular orbital (HOMO) level and pronounced modulation of the interfacial electronic structure. As a result, the energy-level alignment at the perovskite/electron-transport interface is optimized, facilitating charge extraction and defect passivation. These synergistic effects contribute to higher power conversion efficiency (PCE). This work demonstrates an additive-engineering approach based on carbazole SAMs to control perovskite crystallization and interfacial energetics, providing a promising pathway toward high-efficiency PSCs.