Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrophobic MFI-Type Zeolites via Alkali-Cation-Induced Defect Healing: Implications for Adsorbent and Catalyst Design

  • Christos
  • Ferri-Vicedo, Pau
  • Escobar-Bedia, Francisco Javier
  • Vidal Moya, José Alejandro
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Serna Merino, Pedro Manuel
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Martínez, Cristina|||0000-0002-4415-084X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Mayoral, Alvaro
  • Kendra, Richard
  • Lei, Chen
  • Grajciar, Lukas
  • Heard, Christopher James
[EN] Here, we demonstrate that sub-stoichiometric amounts of alkali cations (Na+ and K+) critically govern defect formation during the synthesis of Silicalite-1 (MFI), enabling precise control over framework integrity and surface properties after calcination. Combining systematic synthesis studies with density functional theory (DFT) calculations and high-resolution microscopy, we reveal a defect-healing mechanism in which in situ generated NaOH or KOH species promote Si-O-Si bond rearrangement and enhance the mobility of Si(OH)4 units. This process facilitates the effective healing of T-site vacancies, yielding highly ordered, defect-free MFI frameworks. The resulting Silicalite-1 exhibits markedly enhanced hydrophobicity and superior selectivity in butanol/water separation, underscoring the decisive role of defect control in modulating adsorption and interfacial properties. Importantly, these insights are successfully extended to the synthesis of defect-free TS-1, affording highly hydrophobic Lewis acid catalysts with improved activity and selectivity in the epoxidation of 1-hexene. This environmentally friendly, straightforward, scalable approach offers a versatile pathway to produce defect-free zeolites with precisely tuned physicochemical properties, enabling the development of advanced catalytic and separation materials, especially for applications involving water or polar compounds., The authors acknowledge financial support by the Spanish Government through PID2024-158871OB-I00, PID2022-136934OB-I00, PID2022138481N-BI00, CNS2023-144346 (funded by MCIN/AEI/10.13039/501100011033), and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34 and CIPROM/2024/050). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and CEX2023-001286-S (funded by MCIN/AEI/10.13039/501100011033). CK acknowledges the Spanish Government for a FPI scholarship (PRE2022-103661). PF acknowledges that the project that has generated these results has been supported by a grant from the "la Caixa" Banking Foundation (ID 100010434), whose code is LCF/BQ/PR26/12130021. LG, CJH, CL and RK acknowledge the support of Czech Science Foundation (26-23277S) and Charles University Centre of Advanced Materials (CUCAM, OP VVV Excellent Research Teams, project number \\CZ.02.1.01/0.0/0.0/15_003/0000417). The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. The computations were performed on the Tirant IV cluster of the Servei d'Informatica of the University of Valencia. AM acknowledges support by Gobierno the Aragon (Nanomidas group, code E13_23R). Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS node "Laboratorio de Microscopias Avanzadas" at the University of Zaragoza. The computations at Charles University were supported by the Ministry of Education, Youth and Sports of the Czech Republic through the e-INFRA CZ (ID:90254).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes., E. J. J.-P. and M. H. acknowledge the funding support from MCIN/AEI/10.13039/501100011033 for the project grant PID2022-140516OB-I00, E. J. J.-P. for the project grant PID2019-107893RB-I00, and M. H. for CNS2023-145197, PID2019-108247RA-I00, and her Ramón y Cajal fellowship (RYC-2018-025222-I). M. H, I. C.-R and E. J. J-P acknowledge the Diputación General de Aragón for projects E31_23R (M. H and I. C.-R.) and T57_23R (E. J. J.-P.). A. M. acknowledges the Spanish ministry of Science and Universities (RYC2018-024561-I, CNS2023-144346), and the Gobierno de Aragón (Nanomidas group, E13_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrogen and phosphorus Co-doped ZnO-CdO nanocomposite with boosted photocatalytic degradation of crystal violet

  • Neda, Gebru
  • Taddesse, Abi M.
  • Díaz Carretero, Isabel
  • Mohammed, Ahmed M.
  • Mayoral, Álvaro
  • Yassin, Jemal M.
Nitrogen (N) and phosphorus (P) co-doped ZnO-CdO nanocomposites were synthesized from bioprecursors such as rice (O. Sativa L.), chickpea (Cicer arietinum L.), soybean (G. max (L.) Merr) and sesame (Sesamum indicum L.) through self-doping into the ZnO-CdO composite. The as synthesized composites were characterized using PXRD, XPS, TGA, SEM, Cs-corrected (S) TEM, EDS, FT-IR, AAS and UV-vis spectrophotometer. Effect of biogenic doping on the band structures of the binary heterojunction was also studied using Density Functional Theory (DFT). The theoretical results showed that NP co-doping in ZnO-CdO nanocomposite improves the absorption edge to longer wavelengths in line with the experimental finding obtained from UV-vis measurement. Biogenic NP co-doped ZnO-CdO nanocomposites showed greater photocatalytic activity compared to the undoped congeners under visible light irradiations. Comparatively, photocatalytic activity of biogenic NP co-doped ZnO-CdO samples showed the order: soybean-ZC > chickpea-ZC > rice-ZC > sesame-ZC at optimal conditions under visible light irradiation. The binary ZnO-CdO nanocomposite also showed better photocatalytic activity compared to the host crystal ZnO under the same experimental conditions. Highest photocatalytic degradation efficiency of biogenic NP co-doped ZnO-CdO could be attributed to the lower rate of recombination of the photogenerated electrons and holes as well as its lower band gap energy and good reusability., The authors acknowledge the grant PID2022-136321OB-C21/AEI/10.13039/501100011033/FEDER, EU and to the PID2022-136535OB-100 grant; to the CSIC for the COOPA20271, COOPB22002, and COOPB24072 grants, as well as research grants (HURG-2016-03-02 and HURG-2020-03-02-75) received from Ministry of Education through office of the Research and Extension, Haramaya University. AM acknowledges the Spanish Ministry of Science (RYC2018-024561-I and to the European Union NextGeneration EU/PTR; CNS2023-144346), the grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and the support by Aragon Government ( E13_23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amphiphilic zeolitic imidazolate framework for improved CO2 separation in PIM-1 mixed matrix membranes

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Mayoral, Álvaro
  • Martínez-Visus, Iñigo
  • Foster, Andrew B.
  • Budd, Peter M.
  • Coronas, Joaquín
This study aims to enhance the compatibility between filler and polymer in mixed matrix membranes (MMMs), addressing an important challenge in membrane development. ZIF-94, known for its affinity to CO2, was partially modified with 2-undecylimidazolate (umIm) through the solvent-assisted ligand exchange (SALE) method to improve its compatibility with the prototypical polymer of intrinsic microporosity PIM-1. The modified ZIF-94 (ZIF-94-umIm) can be considered as an amphiphilic MOF with both hydrophilic and hydrophobic moieties, while maintaining a considerably high CO2 adsorption capacity (2.34 mmol g-1 at 90 kPa and 0 °C). Gas separation experiments were performed using mixed gas compositions of 15/85 CO2/N2 at 3 bar and 35 °C. The resulting MMM with a 5 wt.% loading exhibited an enhanced CO2 separation performance, with ca. 70% and 10% increases in CO2 permeability (8900 Barrer) and CO2/N2 selectivity (20.2), respectively, compared to pristine PIM-1 membranes. In addition, thin film nanocomposite membranes were prepared showing a 23.5 CO2/N2 selectivity at 2350 GPU of CO2. This modification strategy shows a great potential for improving the CO2 capture technologies, highlighting the potential of tailoring MOF fillers for advanced membrane materials in gas separation applications., This work acknowledges grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and the European Union-NextGeneration EU), and CEX2023-001286-S (funded by MICIU/AEI /10.13039/501100011033). Financial support from the Aragón government (GA), T68-23R, and M. P.-M. PhD grant, is also gratefully acknowledged. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva-Formación programmes. A. Mayoral acknowledges the Spanish MCN (RYC2018-024561-I and CNS2023-144346) and GA (E13_23R). A.B. Foster acknowledges EPSRC Programme Grant EP/V047078/1 “SynHiSel”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The real structure of intergrown ZSM-5/ZSM-11 industrial zeolite catalysts

  • Shannon, Mervyn D.
  • Cox, Paul A.
  • Mayoral, Álvaro
  • Hsieh, Ming-Feng
  • Turrina, Alessandro
In some industrial-scale reactions, an intergrowth of ZSM-5 and ZSM-11 aluminosilicate zeolites is the preferred catalyst. These structures each have two intersecting channel systems with 10-ring windows, defined by 10 oxygen atoms. The channels are both straight in ZSM-11 but one is sinusoidal in ZSM-5. Parallel bands of ZSM-5 and ZSM-11 intergrown, as assumed in the literature, would lead to some straight sections along the sinusoidal [100] channels in ZSM-5. However, additional defects lead to the formation of 8-ring and 12-ring windows to replace some of the 10-ring windows along the [100] channels in ZSM-5. In turn these defects affect the adjacent, intersecting straight 10-ring channels along [010] and lead to a possible 20 geometries of the pore walls, of which about half are observed. In intergrowths with 5–20% ZSM-11, meandering antiphase boundaries dominate the defects, lattice energy calculations show correlation with numbers of 4-rings introduced, and molecular mechanics calculations suggest tetra-butyl ammonium structure-directing agents are accommodated but do not direct their formation. In catalytic use, 8-ring windows cause pore blockages while 12-ring windows create cavities that can accommodate even larger reaction intermediates than ZSM-11 or can nucleate coking. Diffusion of reactants and products along [010] is also affected., P.A.C. and A.M. thank Johnson Matthey (JM) for funding. A.M. acknowledges the Spanish Ministry of Science, Innovation and Universities (RYC2018-024561-I, CNS2023-144346, Ayuda CEX2023-001286-S financiada por MICIU/AEI /10.13039/501100011033), and the Gobierno the Aragon (Nanomidas group, code E13_23R). Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. Dr. J. L. Casci (retired JM employee) and Prof. P. A. Wright (University of St Andrews) are thanked for helpful discussions. The authors thank R. G. Sanchez and A. Droungou for CHN results and E. Bilbe for XRD capillary analysis (JM Technology Centre, Reading, UK). M.D.S. acknowledges University of St. Andrews for his appointment as an honorary professor., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface-driven electron localization and defect heterogeneity in ceria

  • Zhang, Xingfan
  • Zhou, Yi
  • Mayoral, Álvaro
  • Terasaki, Osamu
  • Catlow, C. Richard A.
  • Sokol, Alexey A.
et al., The exceptional performance of ceria (CeO2) in catalysis and energy conversion is fundamentally governed by its defect chemistry, particularly oxygen vacancies. The formation of each oxygen vacancy (VO••) is assumed to be compensated by two localized electrons on cations (Ce3+). Here, we show by combining theory with experiment that while this 1 VO••: 2Ce3+ ratio accounts for the global charge compensation, it does not apply at the local scale, particularly in nanoparticles. Hybrid quantum mechanical/molecular mechanical (QM/MM) defect calculations, together with synchrotron X-ray photoelectron spectroscopy (XPS) measurements, show that electrons have a strong preference to localize and segregate on surfaces, which can overcome the trapping force from the VO•• sites in the bulk. At a given Fermi level, the surface VO•• tends to trap more electrons than those in bulk, resulting in a higher Ce3+ to VO•• ratio on surfaces than that in the bulk, driven by the preferential localization of electrons and enhanced VO••–Ce3+coupling. Large-scale unbiased Monte Carlo simulations on ceria nanoparticles confirmed this trend and further show that the surface segregation of electrons is more pronounced at low reduction levels and in smaller nanoparticles. In highly reduced ceria nanoparticles, however, the enhanced repulsive interactions lead to a less significant extent of defect heterogeneity or even reverse the location preference of defects in some nanoparticles. Our findings underscore the need to consider both the overall nonstoichiometry and local defect behavior in easily reducible oxides, with direct relevance to their performance in catalytic and energy applications., The authors acknowledge the use of the THOMAS, YOUNG, and ARCHER2 UK National Supercomputing Service (http://www.archer2.ac.uk) via membership of the UK’s HEC Materials Chemistry Consortium, which is funded by EPSRC (Grant Nos. EP/P020194, EP/T022213, and EP/R029431). We also acknowledge funding provided by EPSRC under Grant Nos. EP/W014580, EP/W014378, EP/R001847, EP/K038419, and EP/I030662. Experimental parts were supported by grants from the Japan Society for the Promotion of Science (JSPS), KAKENHI (grant nos. JP 21H05010 and JP 21KK0085). The experiment at SPring-8 BL07LSU was carried out as joint research in the Synchrotron Radiation Research Organization and the Institute for Solid State Physics, The University of Tokyo (Proposal No. 2021B7401). STEM experiment was supported by the Centre for High-Resolution Electron Microscopy (CℏEM), ShanghaiTech University (EM02161943), and Shanghai Key Laboratory of High-resolution Electron Microscopy. J.B. and T.L. acknowledge the Royal Society International Exchanges 2023 programme for funding. A.M. acknowledges the Spanish Ministry of Science MICIU/AEI/10.13039/501100011033 (RYC2018-024561-I; CEX2023-001286-S, EU NextGenerationEU/PRTR: CNS2023-144346 and PID 2022136535OB-I00) and the Regional Government of Aragon (E13_23R)., CEX2023-001286-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observation of a guest-free Si46 clathrate-I framework from Ba8-xSi46 upon in situ vacuum heating

  • Zhou, Yi
  • Zhang, Qing
  • Mayoral, Álvaro
  • Spackman, Peter R.
  • Matsumoto, Takashi
  • Li, Jun
  • Gale, Julian D.
  • Anderson, Michael W.
  • Fukuoka, Hiroshi
  • Yamanaka, Shoji
  • Terasaki, Osamu
Silicon and its composites are key materials owing to their extensive use in the semiconductor industry. While the diamond-structured form dominates, other allotropes with superior properties at ambient conditions remain of interest. Toward this, Si46 clathrate type-I crystals containing alkali/alkaline-earth metals have been extensively studied, but the experimental observation of a guest-free Si46 structure has been challenging. Using advanced electron microscopy, we show experimental evidence of guest-free clathrate-I Si46 framework from Ba8-xSi46 under in situ heating. We reveal the stepwise Ba evacuation process, starting with loss of Ba1 from the smaller cages to form Ba6Si46, followed by removal of Ba2 in larger cages to reach Si46 that appears in the thin region of the nanocrystal with a thickness around 4-6 nm at 500 °C. Calculations give a quasi-direct bandgap of 1.89 eV and support the preferential evacuation of Ba1. The observation of this guest-free Si46 framework opens up possibilities for applications in high-speed transistors, optoelectronic devices or solar cell technologies., The work was supported by the Centre for High-Resolution Electron Microscopy (CħEM), ShanghaiTech University (EM02161943) and Shanghai Key Laboratory of High-resolution Electron Microscopy. A.M. acknowledges the Spanish Ministry of Science (RYC2018-024561-I, CNS2023-144346 and CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033) and the Aragon government (E13_23R). P.S. and J.D.G. thank the Australian Research Council for funding, as well as the Pawsey Supercomputing Centre and National Computational Infrastructure for computing resources. S.Y., H.F. and O.T. thank CREST, JST, Japan for funding., CEX2023-001286-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High pressure-based synthesis of nanoporous metal–organic framework ZIF-93 giving rise to a phase for proton conduction

  • Pérez-Miana, Marta
  • Fernández de Luis, Roberto
  • Fidalgo-Marijuan, Arkaitz
  • Li, Junyan
  • Mayoral, Álvaro
  • Coronas, Joaquín
This study aims to develop a green, solvent-free synthesis of ZIF-93 (ZIF stands for zeolitic imidazolate framework) and to explore the formation of different phases. We report the solvent-free synthesis of a previously unreported nanoporous ZIF phase, ZIF-93_HP (HP referring to “high-pressure”), from zinc oxide using a dual high-pressure (150 MPa) and thermal (110 °C) method. The influence of key synthesis parameters, such as the amount of NH4NO3 promotor and reaction steps, was systematically investigated to maximize the conversion of ZnO into the intermediate ZIF-93_HP, while, in parallel, preventing its further conversion into nanoporous ZIF-93 phase. The material was extensively characterized by X-ray diffraction, thermogravimetry, electron microscopy and N2 and CO2 adsorption, which revealed insights into the structure, morphology and nanoporosity of ZIF-93_HP. ZIF-93_HP, with empirical formula of Zn(C5N2OH5)2·1.2(NH4NO3)·(H2O), is related to the previously reported ZIF-93 (Zn(C5N2OH5)2). Water washing of this phase led to the transformation into ZIF-93 and a significant increase in the BET specific surface area (from 4 to 181 m2/g). In addition, the presence of NH4+ and NO3– ions into its structure makes ZIF-93_HP proton conductor at room temperature and moisture conditions (3.76 × 10–3 S/cm), a property that decreases with increasing temperature due to dehydration. The discovery of ZIF-93_HP highlights the potential of the high-pressure, solvent-free synthesis as a powerful tool for the exploration of different ZIFs and reticular materials that are inaccessible through traditional solvothermal methods. As crystallization under solvent-free conditions is often influenced by nonthermodynamic equilibrium, this approach holds a great potential for expanding the material landscape by enabling the discovery of different phases and structures with unique properties, such as the promising proton conductivity demonstrated here., This research acknowledges grant PID2022-138582OB-I00, EVOLMOF PID2021-122940OB-C31 and CEX2023-001286-S funded by Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia, Innovación y Universidades (MICIU) and by “ERDF a way of making Europe”. Financial support from the Aragón Government (GA), T68-23R and M.P.-M. Ph.D. and postdoctoral (POSTDOC_ECV_06_25) grants, is also gratefully acknowledged. A.M. acknowledges the Spanish MCN (RYC2018-024561-I and CNS2023-144346) and to GA (E13-23R). Authors acknowledge Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas, both at Universidad de Zaragoza and to the Center for High-Resolution Electron Microscopy (CℏEM), ShanghaiTech University (EM02161943)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the structural complexity of ETS-10 using 4D-STEM & electron ptychography

  • Li, Daiyuan
  • Kayani, Sara
  • Sara
  • Dong, Zhuoya
  • Zhang, Qing
  • Cobreces, Santiago
  • Pizarro, Daniel
  • Mayoral, Álvaro
Data will be made available on request., Atomic-level structural elucidation of zeolites remains challenging, particularly due to their sensitivity to the electron beam, as in the case of ETS-10, which features a unique 12-membered ring titanosilicate framework with linear Ti–O–Ti chains. In this study, we demonstrate the use of four-dimensional scanning transmission electron microscopy (4D-STEM) combined with electron ptychography to image Eu-exchanged ETS-10 (Eu-ETS-10) at sub-angstrom resolution. A homemade ptychographic reconstruction algorithm based on the extended ptychographical iterative engine (ePIE) was developed, enabling recovery of high-fidelity phase contrast images. The reconstructed images reveal not only all T-sites, including Si and Ti atoms, but also light elements such as oxygen and extraframework Eu3+ cations. Surface terminations and stacking faults were clearly resolved, allowing identification of the ABA and ABC polymorphs and their local transformations along the three dimensions through multislice reconstruction. These results validate ptychography as a powerful technique for atomic-scale analysis of fragile zeolitic materials offering unique insights into the structural complexity of ETS-10., Authors acknowledge the Spanish Ministry of Science, Innovation and Universities. MICIU/AEI/10.13039/501100011033 (RYC2018-024561-I; PID2022-138481NB-I00, Grant CEX2023-001286-S, ATHENA PID2020-115995RB-I00, METAMORPH PID2023-151295OB-I00 and The EU NextGenerationEU/PRTR: CNS2023-144346). Authors also acknowledge the CℏEM, School of Physical Science and Technology, ShanghaiTech University (#EM02161943); Shanghai Science and Technology Plan (21DZ2260400), the Spanish National Research Council (CSIC) through the i-COOP program (COOPA20470) and the regional government of Aragon (E13_23R). This research work was also funded through Momentum CSIC Programme: Develop Your Digital Talent (MMT24-INMA-01)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization of large-pore intergrowth zeolites SSZ-31 and PST-38

  • Kemp, Kingsley Christian
  • Jo, Donghui
  • Mayoral, Álvaro
  • Hong, Suk Bong
The structure determination of multiple-phase intergrowth zeolites faces more challenges than that of single-phase ordered zeolites because of their structural complexity and diversity. Here, we directly visualized the atomic structure and one-dimensional stacking disorder of the pure-silica large-pore intergrowth zeolites SSZ-31 and PST-38, using aberration-corrected scanning transmission electron microscopy. The atomic-resolution images revealed the presence of distinct polymorphs, their intergrowth boundaries, and cages formed through local connectivity variations. It was found that while SSZ-31 is an almost pure (ca. 90%) polymorph A, E, or their intergrowth, with the ABC stacking of 12-ring channels, PST-38 is a predominant intergrowth between SSZ-31 polymorph C and a 1D 10-ring structure, denoted as PST-39, along the same axis. Furthermore, the latter material also contains a region where the 8-membered rings are connected to the 12- and 10-membered rings. The structural features of SSZ-31 and PST-38 presented here provide insights into the design and synthesis of intergrowth zeolites., This work was supported by the Shanxi Research Institute of Huairou Laboratory, EcoPro HN, the KRICT Institutional Research Program (KK2412-10), the Spanish Ministry of Science MICIU/AEI/10.13039/501100011033 (CNS2023-144346, CEX2023-001286-S, and PID2022-136535OB-I00), the Spanish National Research Council, CSIC (COOPB23035), and the Regional Government of Aragon (DGA E13_20R). We also thank the use of instrumentation, as well as the technical advice provided by the National Facility ELECMI ICTS node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Power-tuned structural and optical properties of bimetallic AgAu nanoparticles produced by gas aggregation sources

  • Aznar, Yaiza
  • Álvarez-García, Covadonga
  • Mayoral, Álvaro
  • Zhao, Junlei
  • Cánovas, Elvira
  • Andrés, Alicia de
  • Martínez Orellana, Lidia
  • Huttel, Yves
Data will be available upon reasonable request., The outstanding properties of bimetallic nanoparticles have made them the subject of extensive research, with ongoing efforts to refine their fabrication to better control their final properties. Silver-gold nanoparticles are one of the most representative binary systems owing to their wide range of applications. Herein, we present the fabrication of bimetallic silver-gold nanoparticles using a solvent-free, gas-phase synthesis method. With this method, the nanoparticle growth can be controlled precisely. We present the evolution of the size, composition and chemical structure of silver-gold nanoparticles as a function of the power used during fabrication, ranging from 4 nm to 10 nm. Nanoparticles display two main structures: core@shell (Au@Ag) and quasi-Janus, with both elements not fully segregated, and a thin Ag shell surrounding the nanoparticles. The nanoparticle size and population of each structure are power-dependent. The formation of these structures is discussed in terms of molecular dynamics simulations. Optical measurements revealed that the nanoparticles presented a clear plasmon resonance peak around 420 nm originating from the silver surface and a less sharp plasmon around 520 nm from the sum of gold plus the interaction of silver-containing nanoparticles. The oxidation of silver upon air exposure proceeds very slowly, preserving the nanoparticles’ properties over time., L.M. & Y.H. acknowledge the project PID2021-126524NB-100 and AM acknowledges CNS2023-144346 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”. Y.A., A.M., A. d A., L.M. and Y.H. acknowledge the Severo Ochoa Centres of Excellence program through Grants CEX2024-001445-S and CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Simultaneous Total Oxidation of Toluene, Propene, and CO Environmental Pollutants Using Bimetallic Au‐Pt/ZrO<sub>2</sub>/UVM‐7 Catalysts

  • Aggett, Kieran J.
  • García, Tomás
  • Morgan, David J.
  • Peláez-Fernández, Mario
  • Mayoral, Álvaro
  • Arenal, Raúl
  • Solsona, Benjamín E.
  • Amorós, Pedro
  • Taylor, Stuart H.
Supported precious metal catalysts, containing either mono or bimetallic Au and Pt nanoparticles, anchored on a hierarchical porous UVM‐7 silica structure, were prepared and evaluated for the removal of volatile organic pollutants by oxidation. The catalysts were investigated for the simultaneous total oxidation of three model compounds: propene, toluene, and CO, commonly associated with “cold start pollutants” in automotive exhausts. Only Au showed low catalytic activity, while Pt nanoparticles were active, with a greater concentration of accessible Pt nanoparticles corresponding with increased catalytic activity. Interestingly, having both metals present on the same catalyst together was preferential for producing higher activity in the total oxidation of CO, propene, and toluene. The loadings of Pt nanoparticles on the catalyst surface, as well as the synthesis method, were important controlling factors. The order of metal loading deposition was influential, depositing Au and Pt sequentially resulted in surface enrichment of the latter deposited metal, leading to enhanced catalytic performance. When Au and Pt were loaded simultaneously, alloy formation occurred, and the surface Pt enrichment was more moderate, but still maintaining better catalytic performance compared with the pure Pt catalyst.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nitrogen and phosphorus Co-doped ZnO-CdO nanocomposite with boosted photocatalytic degradation of crystal violet

  • Neda, Gebru
  • Taddesse, Abi M.
  • Diaz, Isabel
  • Mohammed, Ahmed M.
  • Mayoral, Álvaro
  • Yassin, Jemal M.
Nitrogen (N) and phosphorus (P) co-doped ZnO-CdO nanocomposites were synthesized from bioprecursors such as rice (O. Sativa L.), chickpea (Cicer arietinum L.), soybean (G. max (L.) Merr) and sesame (Sesamum indicum L.) through self-doping into the ZnO-CdO composite. The as synthesized composites were characterized using PXRD, XPS, TGA, SEM, Cs-corrected (S) TEM, EDS, FT-IR, AAS and UV-vis spectrophotometer. Effect of biogenic doping on the band structures of the binary heterojunction was also studied using Density Functional Theory (DFT). The theoretical results showed that NP co-doping in ZnO-CdO nanocomposite improves the absorption edge to longer wavelengths in line with the experimental finding obtained from UV-vis measurement. Biogenic NP co-doped ZnO-CdO nanocomposites showed greater photocatalytic activity compared to the undoped congeners under visible light irradiations. Comparatively, photocatalytic activity of biogenic NP co-doped ZnO-CdO samples showed the order: soybean-ZC > chickpea-ZC > rice-ZC > sesame-ZC at optimal conditions under visible light irradiation. The binary ZnO-CdO nanocomposite also showed better photocatalytic activity compared to the host crystal ZnO under the same experimental conditions. Highest photocatalytic degradation efficiency of biogenic NP co-doped ZnO-CdO could be attributed to the lower rate of recombination of the photogenerated electrons and holes as well as its lower band gap energy and good reusability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Amphiphilic Zeolitic Imidazolate Framework for Improved CO2 Separation in PIM-1 Mixed Matrix Membranes

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Mayoral, Álvaro
  • Martínez-Visus, Íñigo
  • Foster, Andrew B.
  • Budd, Peter M.
  • Coronas, Joaquín
This study aims to enhance the compatibility between filler and polymer in mixed matrix membranes (MMMs), addressing an important challenge in membrane development. ZIF‐94, known for its affinity to CO2, was partially modified with 2‐undecylimidazolate (umIm) through the solvent‐assisted ligand exchange (SALE) method to improve its compatibility with the prototypical polymer of intrinsic microporosity PIM‐1. The modified ZIF‐94 (ZIF‐94‐umIm) can be considered as an amphiphilic MOF with both hydrophilic and hydrophobic moieties, while maintaining a considerably high CO2 adsorption capacity (2.34 mmol g−1 at 90 kPa and 0 °C). Gas separation experiments were performed using mixed gas compositions of 15/85 CO2/N2 at 3 bar and 35 °C. The resulting MMM with a 5 wt.% loading exhibited an enhanced CO2 separation performance, with ca. 70% and 10% increases in CO2 permeability (8900 Barrer) and CO2/N2 selectivity (20.2), respectively, compared to pristine PIM‐1 membranes. In addition, thin film nanocomposite membranes were prepared showing a 23.5 CO2/N2 selectivity at 2350 GPU of CO2. This modification strategy shows a great potential for improving the CO2 capture technologies, highlighting the potential of tailoring MOF fillers for advanced membrane materials in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Real Structure of Intergrown ZSM‐5/ZSM‐11 Industrial Zeolite Catalysts

  • Shannon, Mervyn D.
  • Cox, Paul A.
  • Mayoral, Alvaro
  • Hsieh, Ming-Feng
  • Turrina, Alessandro
In some industrial‐scale reactions, an intergrowth of ZSM‐5 and ZSM‐11 aluminosilicate zeolites is the preferred catalyst. These structures each have two intersecting channel systems with 10‐ring windows, defined by 10 oxygen atoms. The channels are both straight in ZSM‐11 but one is sinusoidal in ZSM‐5. Parallel bands of ZSM‐5 and ZSM‐11 intergrown, as assumed in the literature, would lead to some straight sections along the sinusoidal [100] channels in ZSM‐5. However, additional defects lead to the formation of 8‐ring and 12‐ring windows to replace some of the 10‐ring windows along the [100] channels in ZSM‐5. In turn these defects affect the adjacent, intersecting straight 10‐ring channels along [010] and lead to a possible 20 geometries of the pore walls, of which about half are observed. In intergrowths with 5–20% ZSM‐11, meandering antiphase boundaries dominate the defects, lattice energy calculations show correlation with numbers of 4‐rings introduced, and molecular mechanics calculations suggest tetra‐butyl ammonium structure‐directing agents are accommodated but do not direct their formation. In catalytic use, 8‐ring windows cause pore blockages while 12‐ring windows create cavities that can accommodate even larger reaction intermediates than ZSM‐11 or can nucleate coking. Diffusion of reactants and products along [010] is also affected.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Surface-Driven Electron Localization and Defect Heterogeneity in Ceria

  • Zhang, Xingfan
  • Yoko, Akira
  • Zhou, Yi
  • Jee, Woongkyu
  • Mayoral, Alvaro
  • Liu, Taifeng
  • Guan, Jingcheng
  • Lu, You
  • Keal, Thomas W.
  • Buckeridge, John
  • Ninomiya, Kakeru
  • Nishibori, Maiko
  • Yamamoto, Susumu
  • Matsuda, Iwao
  • Adschiri, Tadafumi
  • Terasaki, Osamu
  • Woodley, Scott M.
  • Catlow, C. Richard A.
  • Sokol, Alexey A.
The exceptional performance of ceria (CeO2) in catalysis and energy conversion is fundamentally governed by its defect chemistry, particularly oxygen vacancies. The formation of each oxygen vacancy (VO••) is assumed to be compensated by two localized electrons on cations (Ce3+). Here, we show by combining theory with experiment that while this 1 VO••: 2Ce3+ ratio accounts for the global charge compensation, it does not apply at the local scale, particularly in nanoparticles. Hybrid quantum mechanical/molecular mechanical (QM/MM) defect calculations, together with synchrotron X-ray photoelectron spectroscopy (XPS) measurements, show that electrons have a strong preference to localize and segregate on surfaces, which can overcome the trapping force from the VO•• sites in the bulk. At a given Fermi level, the surface VO•• tends to trap more electrons than those in bulk, resulting in a higher Ce3+ to VO•• ratio on surfaces than that in the bulk, driven by the preferential localization of electrons and enhanced VO••–Ce3+coupling. Large-scale unbiased Monte Carlo simulations on ceria nanoparticles confirmed this trend and further show that the surface segregation of electrons is more pronounced at low reduction levels and in smaller nanoparticles. In highly reduced ceria nanoparticles, however, the enhanced repulsive interactions lead to a less significant extent of defect heterogeneity or even reverse the location preference of defects in some nanoparticles. Our findings underscore the need to consider both the overall nonstoichiometry and local defect behavior in easily reducible oxides, with direct relevance to their performance in catalytic and energy applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Observation of a guest-free Si46 clathrate-I framework from Ba8-xSi46 upon in situ vacuum heating

  • Zhou, Yi
  • Zhang, Qing
  • Mayoral, Alvaro
  • Spackman, Peter R.
  • Matsumoto, Takashi
  • Li, Jun
  • Gale, Julian D.
  • Anderson, Michael W.
  • Fukuoka, Hiroshi
  • Yamanaka, Shoji
  • Terasaki, Osamu
Silicon and its composites are key materials owing to their extensive use in the semiconductor industry. While the diamond-structured form dominates, other allotropes with superior properties at ambient conditions remain of interest. Toward this, Si46 clathrate type-I crystals containing alkali/alkaline-earth metals have been extensively studied, but the experimental observation of a guest-free Si46 structure has been challenging. Using advanced electron microscopy, we show experimental evidence of guest-free clathrate-I Si46 framework from Ba8-xSi46 under in situ heating. We reveal the stepwise Ba evacuation process, starting with loss of Ba1 from the smaller cages to form Ba6Si46, followed by removal of Ba2 in larger cages to reach Si46 that appears in the thin region of the nanocrystal with a thickness around 4-6 nm at 500 °C. Calculations give a quasi-direct bandgap of 1.89 eV and support the preferential evacuation of Ba1. The observation of this guest-free Si46 framework opens up possibilities for applications in high-speed transistors, optoelectronic devices or solar cell technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High Pressure-Based Synthesis of Nanoporous Metal–Organic Framework ZIF-93 Giving Rise to a Phase for Proton Conduction

  • Pérez-Miana, Marta
  • Fernández de Luis, Roberto
  • Fidalgo-Marijuan, Arkaitz
  • Li, Junyan
  • Mayoral, Álvaro
  • Coronas, Joaquín
This study aims to develop a green, solvent-free synthesis of ZIF-93 (ZIF stands for zeolitic imidazolate framework) and to explore the formation of different phases. We report the solvent-free synthesis of a previously unreported nanoporous ZIF phase, ZIF-93_HP (HP referring to “high-pressure”), from zinc oxide using a dual high-pressure (150 MPa) and thermal (110 °C) method. The influence of key synthesis parameters, such as the amount of NH4NO3 promotor and reaction steps, was systematically investigated to maximize the conversion of ZnO into the intermediate ZIF-93_HP, while, in parallel, preventing its further conversion into nanoporous ZIF-93 phase. The material was extensively characterized by X-ray diffraction, thermogravimetry, electron microscopy and N2 and CO2 adsorption, which revealed insights into the structure, morphology and nanoporosity of ZIF-93_HP. ZIF-93_HP, with empirical formula of Zn(C5N2OH5)2·1.2(NH4NO3)·(H2O), is related to the previously reported ZIF-93 (Zn(C5N2OH5)2). Water washing of this phase led to the transformation into ZIF-93 and a significant increase in the BET specific surface area (from 4 to 181 m2/g). In addition, the presence of NH4+ and NO3– ions into its structure makes ZIF-93_HP proton conductor at room temperature and moisture conditions (3.76 × 10–3 S/cm), a property that decreases with increasing temperature due to dehydration. The discovery of ZIF-93_HP highlights the potential of the high-pressure, solvent-free synthesis as a powerful tool for the exploration of different ZIFs and reticular materials that are inaccessible through traditional solvothermal methods. As crystallization under solvent-free conditions is often influenced by nonthermodynamic equilibrium, this approach holds a great potential for expanding the material landscape by enabling the discovery of different phases and structures with unique properties, such as the promising proton conductivity demonstrated here.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Revealing the structural complexity of ETS-10 using 4D-STEM & electron ptychography

  • Daiyuan, Li
  • Kayani, Sara
  • Dong, Zhuoya
  • Zhang, Qing
  • Cobreces, Santiago
  • Pizarro, Daniel
  • Mayoral, Alvaro
Atomic-level structural elucidation of zeolites remains challenging, particularly due to their sensitivity to the electron beam, as in the case of ETS-10, which features a unique 12-membered ring titanosilicate framework with linear Ti–O–Ti chains. In this study, we demonstrate the use of four-dimensional scanning transmission electron microscopy (4D-STEM) combined with electron ptychography to image Eu-exchanged ETS-10 (Eu-ETS-10) at sub-angstrom resolution. A homemade ptychographic reconstruction algorithm based on the extended ptychographical iterative engine (ePIE) was developed, enabling recovery of high-fidelity phase contrast images. The reconstructed images reveal not only all T-sites, including Si and Ti atoms, but also light elements such as oxygen and extraframework Eu3+ cations. Surface terminations and stacking faults were clearly resolved, allowing identification of the ABA and ABC polymorphs and their local transformations along the three dimensions through multislice reconstruction. These results validate ptychography as a powerful technique for atomic-scale analysis of fragile zeolitic materials offering unique insights into the structural complexity of ETS-10.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural Characterization of Large-Pore Intergrowth Zeolites SSZ-31 and PST-38

  • Kemp, Kingsley Christian
  • Jo, Donghui
  • Mayoral, Alvaro
  • Hong, Suk Bong
The structure determination of multiple-phase intergrowth zeolites faces more challenges than that of single-phase ordered zeolites because of their structural complexity and diversity. Here, we directly visualized the atomic structure and one-dimensional stacking disorder of the pure-silica large-pore intergrowth zeolites SSZ-31 and PST-38, using aberration-corrected scanning transmission electron microscopy. The atomic-resolution images revealed the presence of distinct polymorphs, their intergrowth boundaries, and cages formed through local connectivity variations. It was found that while SSZ-31 is an almost pure (ca. 90%) polymorph A, E, or their intergrowth, with the ABC stacking of 12-ring channels, PST-38 is a predominant intergrowth between SSZ-31 polymorph C and a 1D 10-ring structure, denoted as PST-39, along the same axis. Furthermore, the latter material also contains a region where the 8-membered rings are connected to the 12- and 10-membered rings. The structural features of SSZ-31 and PST-38 presented here provide insights into the design and synthesis of intergrowth zeolites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Power-tuned structural and optical properties of bimetallic AgAu nanoparticles produced by gas aggregation sources

  • Aznar, Yaiza
  • Álvarez-García, Covadonga
  • Mayoral, Álvaro
  • Zhao, Junlei
  • Cánovas, Elvira
  • de Andrés, Alicia
  • Martínez, Lidia
  • Huttel, Yves
The outstanding properties of bimetallic nanoparticles have made them the subject of extensive research, with ongoing efforts to refine their fabrication to better control their final properties. Silver-gold nanoparticles are one of the most representative binary systems owing to their wide range of applications. Herein, we present the fabrication of bimetallic silver-gold nanoparticles using a solvent-free, gas-phase synthesis method. With this method, the nanoparticle growth can be controlled precisely. We present the evolution of the size, composition and chemical structure of silver-gold nanoparticles as a function of the power used during fabrication, ranging from 4 nm to 10 nm. Nanoparticles display two main structures: core@shell (Au@Ag) and quasi-Janus, with both elements not fully segregated, and a thin Ag shell surrounding the nanoparticles. The nanoparticle size and population of each structure are power-dependent. The formation of these structures is discussed in terms of molecular dynamics simulations. Optical measurements revealed that the nanoparticles presented a clear plasmon resonance peak around 420 nm originating from the silver surface and a less sharp plasmon around 520 nm from the sum of gold plus the interaction of silver-containing nanoparticles. The oxidation of silver upon air exposure proceeds very slowly, preserving the nanoparticles’ properties over time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hydrophobic MFI‐Type Zeolites via Alkali‐Cation‐Induced Defect Healing: Implications for Adsorbent and Catalyst Design

  • Kanteler, Christos
  • Ferri, Pau
  • Escobar-Bedia, Francisco Javier
  • Mayoral, Álvaro
  • Vidal-Moya, Alejandro
  • Kendra, Richard
  • Lei, Chen
  • Palomino, Miguel
  • Rey, Fernando
  • Grajciar, Lukáš
  • Heard, Christopher James
  • Serna, Pedro
  • Boronat, Mercedes
  • Martínez, Cristina
  • Moliner, Manuel
Here, we demonstrate that sub-stoichiometric amounts of alkali cations (Na+ and K+) critically govern defect formation during the synthesis of Silicalite-1 (MFI), enabling precise control over framework integrity and surface properties after calcination. Combining systematic synthesis studies with density functional theory (DFT) calculations and high-resolution microscopy, we reveal a defect-healing mechanism in which in situ generated NaOH or KOH species promote Si–O–Si bond rearrangement and enhance the mobility of Si(OH)4 units. This process facilitates the effective healing of T-site vacancies, yielding highly ordered, defect-free MFI frameworks. The resulting Silicalite-1 exhibits markedly enhanced hydrophobicity and superior selectivity in butanol/water separation, underscoring the decisive role of defect control in modulating adsorption and interfacial properties. Importantly, these insights are successfully extended to the synthesis of defect-free TS-1, affording highly hydrophobic Lewis acid catalysts with improved activity and selectivity in the epoxidation of 1-hexene. This environmentally friendly, straightforward, scalable approach offers a versatile pathway to produce defect-free zeolites with precisely tuned physicochemical properties, enabling the development of advanced catalytic and separation materials, especially for applications involving water or polar compounds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hierarchical NF@MXene electrodes with sputter-aggregated high-entropy alloy nanoparticles: interface engineering and electrocatalytic performance

  • Shen, Zhu P.
  • Parrazar, Ekaitz
  • García, Yago
  • Mayoral, Álvaro
  • Martínez, Lidia
  • Huttel, Yves
  • Serrano, Maria B.
  • Cabanelas, Juan C.
Engineering efficient interfaces within electrode architectures is critical for improving charge-transfer processes and electrocatalytic performance in alkaline water electrolysis. Herein, a hierarchical MXene-based hybrid electrode was developed by integrating high-entropy alloy nanoparticles (HEA NPs, Fe-Cr-Co-Mn-Pt), synthesized via sputter gas aggregation source (SGAS), onto either delaminated or multilayer Ti3C2Tx MXene supported on nickel foam (NF). The SGAS technique enables precise control over nanoparticle composition, size, and dispersion, while providing ligand-free nanoparticle surfaces and direct integration onto the MXene layer. The resulting NF@MXene/HEA architecture structure combines the highly conductive MXene network, the catalytic activity of HEA nanoparticles, and the porous framework of NF, thereby enabling efficient electron transport and interfacial charge transfer. Controlled surface oxidation induces Ti(OH)x/TiO2 species, which enhance structural stability and increase the electrochemically active surface area. Electrochemical impedance spectroscopy highlights the key role of MXene interfacial layer in reducing impedance and promoting charge transport within the hierarchical . As a result, the optimized electrode achieves an overpotential of 270 mV at 10 mA cm−2 for OER and stable operation for 10 h in alkaline media. These results demonstrate that SGAS-enabled integration of HEA nanoparticles onto MXene platforms provides an effective strategy for tailoring interfacial properties within hierarchical electrocatalytic architectures.