Pasar al contenido principal

ESTRUCTURAS DE DOBLE ESCALA BASADAS EN NANOCOLUMNAS Y NANOPARTICULAS

PID2021-126524NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold Nanocolumnar Templates for Effective Chemical Sensing by Surface-Enhanced Raman Scattering

  • Barbillon, Grégory
  • Humbert, Christophe
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
Herein, we investigate the chemical sensing by surface-enhanced Raman scattering regarding two templates of gold nanocolumns (vertical and tilted) manufactured by glancing angle deposition with magnetron sputtering. We selected this fabrication technique due to its advantages in terms of low-cost production and ease of implementation. These gold nanocolumnar structures allow producing a high density of strongly confined electric field spots within the nanogaps between the neighboring nanocolumns. Thiophenol molecules were used as model analytes since they have the principal property to adsorb well on gold surfaces. Regarding chemical sensing, the vertical (tilted) nanocolumnar templates showed a detection threshold limit of 10 nM (20 nM), an enhancement factor of 9.8 × 108 (4.8 × 108), and a high quality of adsorption with an adsorption constant Kads of 2.0 × 106 M−1 (1.8 × 106 M−1) for thiophenol molecules., The authors acknowledge the service from the MiNa Laboratory at IMN, funded from CM (project SpaceTec, S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). J.M. García-Martín thanks funding from MICINN (ref. PID2021-126524NB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and Void Connectivity in Nanocolumnar Thin Films Grown by Magnetron Sputtering at Oblique Angles

  • Álvarez, Rafael
  • Regodón Harkness, Guillermo Fernando
  • Acosta-Rivera, Hiedra
  • Rico, Víctor J.
  • Alcalá, Germán
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The morphology and void connectivity of thin films grown by a magnetron sputtering deposition technique at oblique geometries were studied in this paper. A well-tested thin film growth model was employed to assess the features of these layers along with experimental data taken from the literature. A strong variation in the film morphology and pore topology was found as a function of the growth conditions, which have been linked to the different collisional transport of sputtered species in the plasma gas. Four different characteristic film morphologies were identified, such as (i) highly dense and compact, (ii) compact with large, tilted mesopores, (iii) nanocolumns separated by large mesopores, and (iv) vertically aligned sponge-like coalescent nanostructures. Attending to the topology and connectivity of the voids in the film, the nanocolumnar morphology was shown to present a high pore volume and area connected with the outside by means of mesopores, with a diameter above 2 nm, while the sponge-like nanostructure presented a high pore volume and area, as well as a dense network connectivity by means of micropores, with a diameter below 2 nm. The obtained results describe the different features of the porous network in these films and explain the different performances as gas or liquid sensors in electrochromic applications or for infiltration with nanoparticles or large molecules., The authors acknowledge projects PID2020-114270RA-I00, PID2021-126524NB-I00, PID2021-123879OB-C21, and PID2020-112620GB-I00 funded by MCIN/AEI/10.13039/501100011033; project TED2021-130124A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR; projects US-1380977 and US-1381045 funded by Fondo Europeo de Desarrollo Regional (FEDER) and Consejería de Transformación Económica, Industria, Conocimiento y Universidades de la Junta de Andalucía, within Programa Operativo FEDER 2014–2020; project P18-RT-3480 funded by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020), the H2020-EU.1.2.1-FET OPEN program (Grant No. 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP); and the University of Seville (VI PPIT-US). Guillermo Regodón would like to acknowledge funding from the European Comission-NextGenerationEU through the “Plan de Recuperación, Transformación y Resiliencia” from the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Gas-phase synthesis of nanoparticles: analternative physical eco-friendly route

  • Martínez Orellana, Lidia
  • García-Martín, José Miguel
  • Huttel, Yves
Resumen del trabajo presentado en el 31st Imternational Materials Research Congress 2023, celebrado en Cancún (México), el 14 de agosto de 2023, Nanoparticles are widely used for many different biomedical applications like diagnosis, imaging or therapeutics. Despite the great advances in the field, there is a need for high precision fabrication methods that can represent an alternative route for some applications. In this sense, the gas phase synthesis of nanoparticles generates a growing interest motivated by different factors like the capacity to fabricate nanoparticles out-of-thermodynamic equilibrium, a precise control of the nanoparticle size and size distribution (especially in nanoparticles smaller than 5 nm) or the absence of solvents that enable greener approaches for nanoparticle production [1,2]. In this talk we will present the last advances of the inert gas condensation method based on magnetron sputtering called sputter gas aggregation source. We will see some examples of application of these nanoparticles in the biomedicine field [3] and some of the challenges for their application. In addition, we will present some developments to produce in a more precise way nanoparticles with controllable and tunable size, composition and structure [4,5]., The authors would like to acknowledge the CSIC-TEC Monterrey bilateral program ref.BILTC22001. L.M., Y.H. and J.M.G.M. also acknowledge grant PID2021-126524NB-I00financed by MCIN/ AEI /10.13039/501100011033/ and, as appropriate, by “ERDF Away of making Europe”, by the “European Union”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Tuning silver-gold structures at the nanoscale

  • Álvarez, Covadonga
  • Huttel, Yves
  • García-Martín, José Miguel
  • Mayoral, Álvaro
  • Andrés, Alicia de
  • Martínez Orellana, Lidia
Trabajo presentado en el 31st International Materials Research Congress, celebrado en Cancún (México), los días 15 y 16 de agosto de 2023, Silver and gold nanostructures are subject of intensive research due to their interesting properties at the nanoscale, which make them particularly suitable for many different applications ranging from catalysis, nanomedicine, optics, etc. Like the formation of alloys that combines the properties of different elements resulting in novel materials, the combination of different shapes and dimensions also leads to materials having novel properties, especially at the nanoscale. In this talk we will present some examples of silver and gold nanostructures. In particular, nanocolumns (NCs) fabricated by Glancing Angle Deposition with magnetron sputtering [1], nanoparticles (NPs) fabricated by means of a Multiple Ion Cluster Source (MICS) [2] and how they can be combined [3]. We will first briefly present the ultra-high vacuum physical methods used to grow the NCs and NPs, highlighting the control over chemical composition, shape and dimensions of the fabricated nanostructures. Later, we will present some examples of application of these systems, including photo-induced self-cleaning surfaces [3], antibacterial coatings [4], controlled wettability or catalysis., The authors would like to acknowledge the CSIC-TEC Monterrey bilateral program ref.BILTC22001. L.M., Y.H. and J.M.G.M. also acknowledge grant PID2021-126524NB-I00financed by MCIN/ AEI /10.13039/501100011033/ and, as appropriate, by “ERDF Away of making Europe”, by the “European Union”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth dynamics of nanocolumnar thin films deposited by magnetron sputtering at oblique angles

  • Álvarez, Rafael
  • García-Valenzuela, Aurelio
  • Regodón, Guillermo
  • Ferrer, F. J.
  • Rico, Víctor J.
  • García-Martín, José Miguel
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The morphology of numerous nanocolumnar thin films deposited by the magnetron sputtering technique at oblique geometries and at relatively low temperatures has been analyzed for materials as different as Au, Pt, Ti, Cr, TiO, Al, HfN, Mo, V, WO and W. Despite similar deposition conditions, two characteristic nanostructures have been identified depending on the material: a first one defined by highly tilted and symmetric nanocolumnar structures with a relatively high film density, and a second one characterized by rather vertical and asymmetric nanocolumns, with a much lower film density. With the help of a model, the two characteristic nanostructures have been linked to different growth dynamics and, specifically, to different surface relaxation mechanisms upon the incorporation of gaseous species with kinetic energies above the surface binding energy. Moreover, in the case of Ti, a smooth structural transition between the two types of growths has been found when varying the value of the power used to maintain the plasma discharge. Based on these results, the existence of different surface relaxation mechanisms is proposed, which quantitatively explains numerous experimental results under the same conceptual framework., The authors acknowledge projects PID2020-114270RA-I00, PID2021-126524NB-I00, PID2021-123879OB-C21 and PID2020-112620GB-I00 funded by MCIN/AEI/10.13039/ 501100011033, project TED2021-130124A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU /PRTR, projects US-1380977 and US-1381045 funded by Fondo Europeo de Desarrollo Regional (FEDER) and Consejería de Transformación Económica, Industria, Conocimiento y Universidades de la Junta de Andalucía, within Programa Operativo FEDER 2014- 2020, project P18-RT-3480 funded by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020), the H2020-EU.1.2.1-FET OPEN program (Grant 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP), and the University of Seville (VI PPIT-US). Guillermo Regodón would like to acknowledge funding from the European Comission-NextGenerationEU through the ‘Plan de Recuperación, Transformación y Resiliencia’ from the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured films with nanocolumns and nanoparticles: fundamentals and applications

  • García-Martín, José Miguel
  • Martínez Orellana, Lidia
  • Huttel, Yves
Trabajo presentado en el IEEE Nanotechnology Materials and Devices Conference 2023, celebrado en Paestum (Italia), del 22 al 25 de octubre de 2023, In this talk, it will be shown that nanostructured films with nanocolumns and nanoparticles can be fabricated using methods based on magnetron sputtering, which is of particular interest from an industrial point of view. Several applications of those films will also be presented., The authors acknowledge the service from the MiNa Laboratory at IMN and the financial support from the Fulbright Commission and the Spanish Ministry of Science and Innovation (MICINN) and grant PID2021-126524NB-I00 financed by MCIN/ AEI /10.13039/501100011033/ and, as appropriate, by “ERDF A way of making Europe”, by the “European Union”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanostructured films with nanocolumns and nanoparticles: fundamentals and applications

  • García-Martín, José Miguel
  • Martínez Orellana, Lidia
  • Huttel, Yves
Trabajo presentado en el IEEE Nanotechnology Materials and Devices Conference 2023, celebrado en Paestum (Italia), del 22 al 25 de octubre de 2023, In this talk, it will be shown that nanostructured films with nanocolumns and nanoparticles can be fabricated using methods based on magnetron sputtering, which is of particular interest from an industrial point of view. Several applications of those films will also be presented., The authors acknowledge the service from the MiNa Laboratory at IMN and the financial support from the Fulbright Commission and the Spanish Ministry of Science and Innovation (MICINN) and grant PID2021-126524NB-I00 financed by MCIN/ AEI /10.13039/501100011033/ and, as appropriate, by “ERDF A way of making Europe”, by the “European Union”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical Detection of Dopamine: Novel Thin-Film Ti-Nanocolumnar Arrays/Graphene Monolayer-Cufoil Electrodes

  • Balkourani, Georgia
  • García-Martín, José Miguel
  • Gorbova, Elena
  • Lo Vecchio, Carmelo
  • Baglio, Vincenzo
  • Brouzgou, Angeliki
  • Tsiakaras, Panagiotis
Deposition at oblique vapor incidence angles can lead to the growth of thin films with dramatically changed morphological features. Herein, thin-film titanium nanocolumnar arrays were grown on a graphene monolayer/copper foil substrate (TiNCs/Gm-Cufoil) by applying a physical vapor deposition method, through magnetron sputtering at an oblique angle. Ti-nanocolumnar arrays with ca. 200 nm length were developed throughout the substrate with different morphologies depending on the substrate topography. It was found that over the as-fabricated electrocatalyst, the electrooxidation reaction of dopamine is facilitated, allowing quasi-reversible electrooxidation of protonated dopamine to dopamine quinone. Additionally, contrary to works that appeared in the literature, TiNCs/Gm-Cufoil also promotes further quasi-reversible oxidation of leucodopaminechrome to dopaminechrome. The electrode exhibited two linear ranges of dopamine detection (10–90 μM with a sensitivity value of 0.14 μAμM−1cm−2 and 100–400 μM with a sensitivity value of 0.095 μAμM−1cm−2), a good stability over time of about 30 days, and a good selectivity for dopamine detection., This research was funded by the [Hellenic Foundation for Research and Innovation] [Fellowship Number: 05869] (G.B.); the [Ministry of Science and Innovation, Spain] [grant PID2021-126524NB-I00] (J.M.G.-M) and the [University of Thessaly] [5600.03.08.05] (A.B.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanocolumns and nanoparticles based dual scale structures

  • Martínez Orellana, Lidia
  • García-Martín, José Miguel
  • Huttel, Yves
Resumen del trabajo presentado en IEEE Nano 2024, celebrado en Gijón (España), del 8 al 11 de julio de 2024, This talk will be focused on the precise fabrication of nanocolumns (NCs) and nanoparticles (NPs) using sputtering based techniques and their combination to create more complex structures. Sputtering techniques are of importance to the industry, so this kind of nanostructuration offers new possibilities from an industrial perspective. First, the fabrication techniques will be presented. Ultra-high vacuum physical methods were used to grow the NCs by Glancing Angle Deposition (GLAD) [1] and NPs fabricated by means of a Multiple Ion Cluster Source (MICS) [2], highlighting the control over chemical composition, shape and dimensions of the fabricated nanostructures. These are environmentally friendly techniques since they are carried out at room temperature with moderate energy consumption, do not involve chemicals (i.e., no generation of toxic byproducts), and allow for the production of nanostructured surfaces of considerable size (several square centimeters in the lab) with high purity, making them quite appealing for industrial applications (scaling-up is feasible). Later, different examples will be presented like antibacterial coatings [3], chemical detection using enhanced surface spectroscopies [4], photo-induced self-cleaning surfaces [5], or controlled wettability among others. In these cases, the combination of NCs and NPs can lead to synergic effects., Authors acknowledge funding from PID2021-126524NB-I00 financed by MCIN/ AEI /10.13039/501100011033/ and “ERDF A way of making Europe”, by the “European Union” and CSIC (ref. BILTC22001 and ILINK22048).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Engineered Fe-Based Nanocolumnar Films

  • Garrido-Segovia, María
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Gyergyek, Sašo
  • Espinosa, Ana
  • Navarro, Elena
  • García-Martín, José Miguel
Trabajo presentado en el Advanced Research Workshop: Functional Spintronic Nanomaterials for Radiation Detection and Energy Harvesting celebrado en Kiev (Ucrania), del 25 al 27 de septiembre de 2023, Nowadays, there is great interest in obtaining nanostructured thin films in large areas using methods that can be scaled up for mass production. Nanocolumnar films fabricated by glancing angle deposition with magnetron sputtering (MS-GLAD) are a very promising approach for this purpose. In this work, the morphology, crystalline structure and magnetic properties of iron nanocolumnar films obtained by MS-GLAD are studied. It is also shown how these features are modified when the nanocolumnar films are subjected to thermal treatments transforming the iron into some of its different oxides. An additional coating is also studied, which consists of the deposition of platinum (Pt) nanoparticles, generated by a multiple ion cluster source, on top of the iron nanocolumns. The morphology and the wettability properties of that heterogeneous system are reported., Projects SPS G5792, from the Science for Peace and Security Programme of NATO, ILINK22048, from the i-LINK 2022 Programme of CSIC, and PID2021- 126524NB-100, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", are acknowledged. Also, the work has been supported by the Ministerio de Ciencia e Innovación (MICINN) through the projects, PID2021- 123112OB-C21, TED2021-129688B-C21, Comunidad de Madrid by S2018/NMT- 4321 NANOMAGCOST and S2022/BMD-7434 ASAP-CM, and by the Slovenian Research Agency (Research Core Funding P2-0089). The Ministerio de Universidades has also supported this work through a Formación de Profesorado Universitario (FPU) grant (M. G.-S.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Aplicaciones recientes de películas delgadas nanoestructuradas con nanocolumnas y nanopartículas

  • García-Martín, José Miguel
  • Martínez Orellana, Lidia
  • Huttel, Yves
Resumen del trabajo presentado en el LXVII Congreso Nacional de Física, celebrado en Chihuahua (México), del 6 al 11 de octubre de 2024, Al inicio de la charla, se explicarán brevemente los métodos físicos en ultra alto vacío basados en pulverización catódica de tipo magnetrón (magnetron sputtering) que utilizamos para preparar las películas delgadas con nanocolumnas y nanopartículas: las nanocolumnas se fabrican mediante depósito en ángulo rasante, GLAD [1], mientras que las nanopartículas se fabrican mediante una fuente de agregados de iones múltiples, MICS [2]., Los autores agradecen la financiación al MICINN, ref. PID2021-126524NB-I00, al Programa de Ciencia para la Paz y la Seguridad de la OTAN, ref. SPS G5792, al Programa i-LINK 2022 del CSIC, ref. ILINK22048, y al programa bilateral CSIC-TEC Monterrey, ref. BILTC22001.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanostructured Thin Films With Nanocolumns And Nanoparticles: Sputtering-Based Manufacturing And Recent Applications

  • García-Martín, José Miguel
  • Martínez Orellana, Lidia
  • Huttel, Yves
Resumen del trabajo presentado en la 14th International Conference: Nanomaterials: Applications & Properties, celebrada en Riga (Letonia), del 8 al 13 de septiembre de 2024, In this talk, it will be shown that nanostructured films with nanocolumns and nanoparticles can be fabricated using methods based on magnetron sputtering, which is of particular interest from an industrial perspective. Several applications of these films will also be presented., Authors acknowledge funding from MICINN (ref. PID2021-126524NB-I00), NATO (ref. SPS G5792) and CSIC (ref. ILINK22048).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optical and structural characterization of gold nanocolumns fabricated via glancing angle deposition by sputtering

  • Garrido-Segovia, María
  • González Sagardoy, María Ujué
  • Galarreta-Rodríguez, Itziar
  • Navarro, Elena
  • Espinosa, Ana
  • García-Martín, José Miguel
Resumen del trabajo presentado en IEEE Nano 2024 - 24th IEEE International Conference on Nanotechnology, celebrado en Gijón (España), del 8 al 11 de julio de 2024, The utility of sputtering in manufacturing thin films is widely acknowledged, particularly within industrial contexts. This technique boasts considerable versatility, enabling the manufacturing of nanocolumnar films (NCs) from various materials through substrate tilting during atom deposition. Regarding Au NCs, they have been used for several applications: as black metal coatings in the visible spectrum [1], as bioelectrodes [2] and as templates for the identification of molecules with SERS, Surface Enhanced Raman Scattering [3,4]. The present work seeks to examine the presence of plasmons in these Au NCs, with the aim of leveraging them as a heat source via photothermal methods or as biosensor probes. This thermal effect is being investigated as a precursor in catalytic processes and for localized tumour treatment [5]. Diverse morphologies of Au nanostructures have been produced on silicon substrates in this work: i) a thin film, for the sake of comparison; ii) a vertical nanocolumnar film, and iii) a film featuring tilted nanocolumns. Morphological characterization of the samples was performed using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Their crystalline and electronic structures were assessed through X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) at the Au L3’ edge (11919 eV). The latter two techniques were carried out at BM25 and BM30 beamlines, respectively, at the European Synchrotron Radiation Facility (ESRF, France). Finally, the optical properties of these films have been examined using an ellipsometer and a reflectivity measurement system custom-assembled within the laboratory. The different nanostructuring of the films will impart varying optical properties to them, facilitating the identification of those most suitable for the mentioned applications., Funding from PID2021-126524NB-I00, PID2021-127033OB-C21 and Ministerio de Universidades through a FPU grant (FPU/02272). We acknowledge the BM30 and BM25 beamline staff for their assistance
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Películas delgadas nanoestructuradas con nanocolumnas y nanopartículas: fundamentos y aplicaciones

  • García-Martín, José Miguel
  • Martínez Orellana, Lidia
  • Huttel, Yves
Trabajo presentado en el XVII Congreso Nacional de Materiales - CNMAT 2024, celebrado en Málaga (España), del 25 al 28 de junio de 2024, En esta charla se mostrará que se pueden fabricar películas nanoestructuradas con nanocolumnas y nanopartículas mediante métodos basados en pulverización catódica de tipo magnetrón (magnetron sputtering), lo que resulta de especial interés desde el punto de vista industrial. También se presentarán varias aplicaciones de esas películas, Los autores agradecen al MICINN, PID2021-126524NB-I00, al Programa de Ciencia para la Paz y la Seguridad de la OTAN, SPS G5792, y al Programa i-LINK 2022 del CSIC, ILINK22048.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antitumor activity of bimetallic silver/gold nanoparticles against MCF-7 breast cancer cells

  • Martínez-Sanmiguel, J. José
  • Zarate-Triviño, Diana
  • García-García , M. Paula
  • García-Martín, José Miguel
  • Mayoral, Álvaro
  • Huttel, Yves
  • Martínez Orellana, Lidia
  • Cholula-Díaz, Jorge L.
Breast cancer poses a global threat with rising incidence and high mortality. Conventional treatments, including chemotherapy, radiation, surgery, and immunotherapy, have side effects, such as resistance issues and adverse effects due to genetic mutations. Meanwhile, noble metal nanoparticles (NPs) synthesized using environmentally friendly methods offer alternative treatments. Bimetallic gold (Au) and silver (Ag) NPs, using natural compounds like starch as stabilizers, enhance biomedical applications, including breast cancer therapies. In this work, the optical properties, stability, and particle size of colloidal bimetallic Ag/Au NPs were analyzed using UV-visible spectroscopy and ζ-potential measurements. The structural properties of the NPs were studied by powder X-ray diffraction (PXRD), while the morphology, chemical composition and particle size were determined using scanning transmission electron microscopy (STEM). The antitumor properties of the Ag/Au NPs were analyzed on human breast cancer cells (MCF-7) using the MTT viability method, reactive oxygen species (ROS) production, and genotoxicity assays. Peripheral blood mononuclear cells (PBMCs) were used as a reference of healthy cells. UV-vis spectroscopy and EDX mapping analysis confirmed the synthesis of bimetallic Ag/Au NPs. Localized surface plasmon resonance (LSPR) absorption bands shifted from 407 nm (Ag) to 524 nm (Au) based on the chemical composition of the NPs. The Ag/Au NPs showed cytocompatibility in PBMCs and a dose-dependent anticancer effect against MCF-7 cancer cells, as well as cell death dependent on ROS production was observed, particularly in NPs with atomic compositions of 50 and 75 at% Ag. This biological activity of the bimetallic NPs was associated with genotoxic damage of 20-24% greater than that observed in the monometallic counterparts. This study demonstrated the synthesis of mono- and bimetallic Ag/Au NPs using a rapid, reproducible and environmentally friendly method, with successful biomedical application against human breast cancer MCF-7 cells., The groups at CSIC and Tecnologico de Monterrey acknowledge the Acciones Bilaterales de Movilidad Conjunta, Modalidad B, program (ref. BILTC22001) for financial support. The group at Tecnologico de Monterrey thanks the School of Engineering and Sciences at Tecnologico de Monterrey for partial funding provided through the Research Chair of Photonics and Quantum Systems and the Department of Science at Tecnologico de Monterrey for access to laboratories and characterization equipment. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS node “Laboratorio de Microscopias Avanzadas” at the University of Zaragoza. Y. H., L. M. and J. M. G.-M. acknowledge the financial support of the Spanish Ministry of Science and Innovation to grant PID2021-126524NB-100 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. AM acknowledges the Spanish Ministry of Science and Innovation (RYC2018-024561-I), the Gobierno the Aragon (Nanomidas group, code E13-23R) and the grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Addressing molecular geometry on dense gold nanoparticle substrates by two-color sum-frequency generation spectroscopy combined with DFT calculations

  • Barbillon, Grégory
  • Humbert, Christophe
  • Clavaguéra, Carine
  • Gayral, Audrey
  • Martínez, Lidia
  • Huttel, Yves
  • García-Martín, José Miguel
The geometrical conformations of dodecanethiol (DDT) molecules grafted on small gold nanoparticles (AuNPs, 7.5 nm diameter) deposited with various densities on a substrate were detected by two-color sum-frequency generation (SFG) spectroscopy. The high level of gauche defects indicates a L-shape structure of the alkane chains calculated classically through the amplitude ratios of the resonant modes of vibration for CH2 methylene and CH3 methyl groups (d+/r+ and d−/r−). Our amplitude ratios are higher than those found in the existing literature, and such effect can be ascribed to the combined action of several phenomena highlighting the geometrical molecular complexity on metal spheres: (i) the matching of the visible wavelength of excitation with the plasmonic resonance of either isolated AuNPs (490 nm) or AuNPs multimers (600 nm), and (ii) the local field enhancement. Additionally, we apply Density Functional Theory calculations on gold clusters functionalized by DDT molecules in interaction in a 3D space. By comparison with SFG results, we evidence through condensed Fukui analysis and computed IR/Raman spectra that the CH2 methylene gauche defect in the alkane chain is present in the first one located beyond the sulfur atom giving precise insight on molecular geometry., Yves Huttel, Lidia Martínez and José Miguel García-Martín acknowledge grant PID2021-126524NB-100 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe” ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-Driven Morphological and Microstructural Changes of Gold Nanoparticles Prepared by Aggregation from the Gas Phase

  • Košutová, T.
  • Krtouš, Z.
  • Kousal, J.
  • Kylián, O.
  • Hanuš, J.
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Nikitin, D.
  • Pleskunov, P.
  • Biederman, H.
  • Horák, L.
  • Dopita, M.
The effect of annealing on the thin layers of gold and gold nanoparticles in air was studied by statistically relevant X-ray scattering methods. The nanoparticle behavior is found to depend on the substrate coverage and annealing temperature. During annealing up to 450 °C, the size of single-crystalline nanoparticles gradually increases through the process of Ostwald ripening, while the density of crystallographic defects decreases slightly. An abrupt change occurs above 450 °C, whereas no significant evolution is observed for the less covered sample; at the sample with more material, the nanoparticles coalesce, and their shape becomes more rounded by further annealing. Only after the spheroidization is completed do the sizes of crystallites follow the nanoparticle size growth. Comparison with the thin continuous gold layer shows that the healing of the crystallographic defects, i.e., microstrain and stacking faults, takes place at significantly lower temperatures if the material is evenly distributed on the silicon substrate surface. However, annealed nanoparticle layers provide a much narrower particle size distribution when compared to a dewetted gold thin layer. At around 800 °C, the alignment of the gold crystal structure toward the substrate is detected, and it changes from the random distribution of the atomic planes given by the random initial orientation of deposited nanoparticles. Another interesting phenomenon occurs for annealing above 1000 °C; for the nanoparticle layers, the smallest nanoparticles evaporate, leaving holes in the SiO<inf>2</inf> surface layer. © 2025 Elsevier B.V., All rights reserved., This study was financially supported by the Czech Science Foundation in the frame of the grant 22-16667S. Y.H and L.M. acknowledge the financial support of the Spanish Ministry of Science and Innovation to grant PID2021-126524NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring plasmonic hotspots of Au tilted nanocolumns and their application to the uracil detection by surface-enhanced Raman scattering

  • Barbillon, Grégory
  • Faure, Mathilde
  • Douillard, Ludovic
  • Caudron, Eric
  • Humbert, Christophe
  • García-Martín, José Miguel
In this work, an investigation on plasmonic hotspots of Au tilted nanocolumns and their application to the uracil detection by surface-enhanced Raman scattering (SERS) is addressed. These Au tilted nanocolumns are fabricated by employing a low-cost and easy-to-implement fabrication technique, which is the glancing angle deposition with magnetron sputtering. Moreover, these Au nanocolumns can generate a great density of highly confined electric field zones, called hotspots, located in the nanogaps between the nearest nanocolumns. The photoemission electron microscopy is employed to obtain the statistics on the distribution of these plasmonic hotspots with a high accuracy (spatial resolution of 10–20 nm) in the spectral range from 680 nm to 1080 nm. Thus, the SERS intensity can be correlated with the density and the intensity distribution of these plasmonic hotspots. Finally, the plasmonic hotspots of the Au nanocolumns are used to assess the limit of detection (LOD) of the uracil molecule by SERS. This LOD is determined at 6 nM demonstrating the good sensitivity of our Au nanocolumns compared to the existing literature., José Miguel García-Martín thanks grant PID2021-126524NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and also acknowledges the service from the MiNa Laboratory at IMN, funded from CM (project SpaceTec, S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of magnetite nanoparticles (Fe3O4) through an ultra-sonically assisted coprecipitation method

  • Amaya, J.
  • Saavedra Gaona, I.M.
  • Parra Vargas, C.A.
  • Rincón, R.J.
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Llamosa-Pérez, D.
Fe3O4 and Fe3O4@SiO2 nanoparticles were synthesized and characterized using an ultrasonically assisted co-precipitation method. Two synthesis conditions were evaluated by varying the ammonia addition rate: dropwise (6.95 mL min−1, Fe3O4-I) and instantaneous (429 mL min−1, Fe3O4-II). The resulting Fe3O4 nanoparticles exhibited average crystallite sizes of 12.5 ± 1.2 nm (I) and 10.3 ± 1.7 nm (II). Subsequent SiO2 coating via a TEOS sol-gel route produced core-shell Fe3O4@SiO2 structures with shell thicknesses of 2.1–2.6 nm (I@SiO2) and 2.4–2.9 nm (II@SiO2). Magnetic measurements revealed saturation magnetization (Ms) values of 61.6 (I) and 66.5 emu·g−1 (II) for the uncoated samples, and 11.7 (I@SiO2) and 41.0 emu·g−1 (II@SiO2) after coating, with coercivity (Hc) ranging from 0.005 to 3.8 Oe. The blocking temperatures (TB) were 176.4–192.8 K for Fe3O4 and 132.1–161.2 K for Fe3O4@SiO2, confirming superparamagnetic behavior at room temperature. DLS analysis verified excellent colloidal stability and uniform dispersion, while FTIR spectra confirmed successful SiO2 coating and the presence of hydroxyl and silanol surface groups. The SiO2 shell improved nanoparticle stability and dispersion while slightly reducing magnetic response. These results demonstrate that controlled synthesis under ultrasonic assistance yields highly crystalline, stable Fe3O4 based nanostructures suitable for biomedical applications such as MRI contrast agents., We would like to express our gratitude to the Nanomaterials Laboratory at Antonio Nariño University for providing the equipment and facilities necessary to carry out this research. This study was funded by Antonio Nariño University (Grant No. 2019227). Y.H. and L.M. acknowledge support from Grant PID2021-126524NB-I00, funded by MCIN/AEI/10.13039/501100011033 and, where applicable, by “ERDF—A way of making Europe,” the “European Union,” or the “European Union NextGenerationEU/PRTR.” This research was also supported by MINCIENCIAS (Grant No. 933-2023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fine tuning wettability through multiscale structures based on ion beam microtexturization, nanocolumns and nanoparticles

  • Huttel, Yves
  • Garrido-Segovia, María
  • García-Martín, José Miguel
  • García, M. A.
  • Gago, Raúl
  • Martínez Orellana, Lidia
Resumen del trabajo presentado en el 12th International Workshop of Functional Nanocomposites (Nanoworkshop 2025), celebrado en La Rábida (Huelva, Spain), del 7 al 10 de septiembre de 2025, Wettability of surfaces is a continuously growing field were surfaces with special characteristics are of significant interest from environmental and economical points of view, as they can present properties like self-cleaning of solar panels. While chemical modifications of surfaces are popular to modify the wettability of the surfaces, less is known about the physical effect of morphological changes on the wettability. Here we present a multiscale approach that combines the use of templates by surface microtexturization of titanium (Ti) substrates together with the subsequent deposition of Ti nanocolumnar coatings and the final decoration with Ti nanoparticles (NPs). We will first briefly present the (ultra-)high vacuum physical methods used to induce ripples on Ti substrates by ion beam sputtering (IBS) [1], the growth of tilted nanocolumn arrays by Glancing Angle Deposition (GLAD) [2-3] and NPs fabricated by means of an Ion Cluster Source (ICS) [4], highlighting the control over chemical composition, shape and dimensions of the fabricated nanostructures at each step. Later, we will present some examples where the proposed multiscale approach leads to synergic effects on the wettability by following the evolution of the contact angle at the different stages and with the progressive surface coverage with NPs., Financial support of the Spanish Ministry of Science and Innovation to grant PID2021-126524NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is acknowledged. Financial support is also acknowledged through project TED2021-129876B-I00, financed by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Gold-iron nanostructures: assessing magnetic and plasmonic efficiency for biomedical applications

  • Garrido-Segovia, María
  • Navarro, Elena
  • Espinosa, Ana
  • García-Martín, José Miguel
Resumen del trabajo presentado en IV Asamblea Conexión Nanomedicina CSIC, celebrada en Madrid los días 13 y 14 de noviembre de 2025, Magnetron Sputtering (MS) is a versatile and scalable technique used in combination with Glancing Angle Deposition (GLAD) to fabricate nanostructured surfaces. This method creates nanocolumnar films (NCs) by taking advance of grazing incidence angles and the shadowing effect, resulting in anisotropic and porous structures[1]. Fe-based NCs have drawn significant attention due to their highly geometry-dependent magnetic properties[2,3]. Concurrently, Au NCs are widely studied for their optical properties, characterized by Localized Surface Plasmon Resonances (LSPR) when nanostructured[4,5]. The strategic integration of Au and Fe NCs yields magnetoplasmonic nanostructures that successfully combine both magnetic and plasmonic functionalities. This dual capability is particularly advantageous for biomedical applications, such as photothermal and hyperthermal therapies, where precise manipulation via both light and magnetic fields at the nanoscale is essential., This work was supported by Ministerio de Ciencia, Innovación y Universidades (FPU grant (M. G.-S.) and projects PID2021-126524NB-100, and PID2021-127033OB-C21)) and CSIC (PIE 20226AT024)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Synthesis and Characterization of Sputter-Deposited Gold-Iron Nanostructures for Magnetic and Magnetoplasmonic Applications

  • Garrido-Segovia, María
  • Navarro, Elena
  • Espinosa, Ana
  • García-Martín, José Miguel
Resumen del trabajo presentado en el 9th Young Researchers in Magnetism Conference (2025), celebrado en Almagro, Ciudad Real (España), los días 5 y 6 de noviembre de 2025, Magnetron sputtering (MS) is a scalable and versatile technique widely used in both research and industry for the fabrication of thin films. Its compatibility with glancing angle deposition (GLAD) makes it interesting for the production of nanostructured surfaces. When sputtering is combined with GLAD, nanocolumnar films (NCs) are grown by taking advantage of the angles at grazing incidence and the shadowing effect generated during atomic deposition. This results in highly anisotropic and porous films [1]. Among the materials used in MS-GLAD, iron-based NCs have drawn significant interest due to their varying magnetic properties, which strongly depend on the geometry and orientation of the columns and, therefore, in the deposition geometry and conditions [2,3]. On the other hand, gold NCs have been of extensive interest for their optical properties, particularly the presence of localized surface plasmon resonances (LSPR) when nanostructured [4,5]. The integration of both magnetic and plasmonic properties in a single structure, that is, the combination of gold and iron NCs, has led to the development of magnetoplasmonic nanostructures, which present potential applications. Among these, we highlight photothermal and hyperthermal therapies, where being able to manipulate both light and magnetic fields at the nanoscale is highly advantageous., This work was supported by Ministerio de Ciencia, Innovación y Universidades (FPU grant (M. G.-S.) and projects PID2021-126524NB-100, and PID2021-127033OB-C21)) and CSIC (PIE 20226AT024)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanocolumnar ZnO/Fe Magnetic Composites

  • Kaidatzis, Andreas
  • Garrido-Segovia, María
  • García-Martín, José Miguel
  • Diamantopoulos, Nikolaos C.
  • Theodoropoulos, Dimitrios-Panagiotis
  • Poulopoulos, Panagiotis
This article belongs to the Section Magnetic Materials, Composite ZnO/Fe nanostructured thin films are synthesized via physical vapor deposition using radio frequency magnetron sputtering in conventional, as well as in glancing angle deposition (GLAD) geometries. ZnO is employed as a compact nanocolumnar template to direct Fe growth in bilayer and multilayer architectures. Morphological analysis reveals well-defined ZnO/Fe interfaces for normal deposition geometry, with diminished interface clarity and reduced layer thickness in GLAD samples. Crystallographic characterization indicates clear ZnO-{002} and α-Fe-{110} texture. Magnetostatic characterization investigates the effects of morphology on coercivity and domain nucleation. GLAD-deposited Fe films exhibit clear in-plane magnetic anisotropy, with remanence to saturation magnetization (MREM/MSAT) equal to 1 for the easy axis and equal to 0.24 for the hard axis, consistent with inclined nanocolumn morphology. Our findings show that deposition geometry, rather the ZnO template, mostly affects the morphology of Fe films. The above, highlight the potential of engineered ZnO/Fe nanocomposites for magnetic, spintronic, and magnetoplasmonic applications, by tuning morphology and interface quality through deposition parameters., This research has been funded by the funding programme “MEDICUS” (project 83887), of the University of Patras. J.M.G.-M. acknowledges the grant PID2021-126524NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A Way of Making Europe”. We acknowledge the service from the MiNa Laboratory at IMN, and the funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). The Ministerio de Universidades has also supported this work through a Formación de Profesorado Universitario (FPU21/00272) grant (M.G.-S.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Magnetic nanopillar arrays grown by glancing angle deposition with sputtering

  • Garrido-Segovia, María
  • Navarro, Elena
  • García-Martín, José Miguel
Physical vapor deposition techniques are widely used for fabricating thin films. However, by changing the system's geometry during atom deposition, nanocolumnar films (also called disordered nanopillar arrays) can be produced. The morphology of these films is influenced by factors such as the angle of incidence of the atoms on the substrate, the pressure of the deposition chamber or the energy of such atoms, resulting in different properties. For magnetic materials, this includes an induced morphological uniaxial magnetic anisotropy or the modification of the remanence magnetization and the coercive field. This article covers the characteristics of evaporation and sputtering techniques, focusing on oblique and glancing angle deposition (OBD and GLAD) and the atomic self-shadowing effect that leads to nanocolumnar films. It reviews studies on nanostructured magnetic films, analyzing the magnetic anisotropy, the electrical resistivity, and the ferromagnetic resonance. It also presents our research on iron-based nanocolumnar films fabricated by sputtering and discusses future perspectives in this field., The Ministerio de Universidades has supported this work through a Formaciön de Profesorado Universitario (FPU) grant (M. G.-S.). J.M.G.-M. thanks grant PID2021-126524NB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. E. Navarro also thanks the Ministerio de Ciencia e Innovación (MCIN) for the support of the work through the projects PID2021-123112OB-C21 and TED2021-129688B-C21 and the Comunidad de Madrid through S2018/NMT-4321 NANOMAGCOST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pd-Au bimetallic thin film on polyaniline decorated graphite substrate for efficient hydrogen evolution reaction under acidic condition

  • Islam, Motasim B.
  • Islam, Md Nurnobi
  • Ahmed, Jahir
  • Singha, Nayan Ranjan
  • Uddin, Mohammad Afsar
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Faisal, M.
  • Algethami, Jari S.
  • Harraz, Farid A.
  • Hasnat, Mohammad A.
The development of efficient and stable electrocatalysts for the hydrogen evolution reaction (HER) is crucial for advancing sustainable hydrogen production. In this study, a polyaniline (PANI)-supported Pd–Au bimetallic film on pencil graphite (PGP), denoted as Pd–Au–PANI@PGP, was fabricated and evaluated for HER activity in 0.5 M H₂SO₄. The catalyst was characterized using Scanning Electron Microscopy (SEM) and Energy-Dispersive X-ray Spectroscopy (EDX), which confirmed the successful surface modification of PGP with Pd and Au, along with the polymeric network of PANI. The chemical composition and electronic structure were further examined by X-ray Photoelectron Spectroscopy (XPS), revealing a high proportion of metallic Pd and Au species. Electrochemical performance was assessed via linear sweep voltammetry (LSV), Tafel analysis, electrochemical active surface area (ECSA), and turnover frequency (TOF) measurements. The Pd–Au–PANI@PGP electrode exhibited an exceptionally low overpotential of 31.6 mV at 10 mA cm⁻², comparable to the benchmark Pt–C@GC catalyst (19 mV). The enhanced activity is attributed to the synergistic effect of Pd and Au, which facilitates electron transfer and accelerates catalytic kinetics. Tafel slope analysis confirmed that the HER process is primarily governed by the Volmer step, with Pd–Au–PANI@PGP exhibiting the lowest slope (91.44 mV dec⁻¹), indicative of improved reaction kinetics. The high exchange current density (4.65 mA cm⁻²) and large ECSA (1.64 cm²) further validate its superior catalytic activity. Moreover, the TOF of Pd–Au–PANI@PGP (0.0971 s⁻¹) significantly surpasses that of other modified electrodes, confirming its excellent intrinsic activity. Long-term stability, evaluated by chronoamperometry, showed negligible current degradation over 6 h, underscoring the durability of the catalyst. Overall, these results demonstrate that Pd–Au–PANI@PGP is a highly promising HER electrocatalyst, offering outstanding activity, rapid reaction kinetics, and excellent stability, making it a viable candidate for future hydrogen production applications., The research team thanks the Deanship of Graduate Studies and Scientific Research at Najran University for supporting the research project through the Nama’a program, with the project code NU/GP/SERC/13/223-2. MAH thanks Shahjalal University of Science technology research center for providing a research grant (PS/2024/1/03). MAU thanks to Spanish Ministry of Science, Innovation and Universities for RAMÓN Y CAJAL 2021 fellowship (Project RYC2021-034211-I). LM and YH acknowledge grant PID2021-126524NB-100 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Power-tuned structural and optical properties of bimetallic AgAu nanoparticles produced by gas aggregation sources

  • Aznar, Yaiza
  • Álvarez-García, Covadonga
  • Mayoral, Álvaro
  • Zhao, Junlei
  • Cánovas, Elvira
  • Andrés, Alicia de
  • Martínez Orellana, Lidia
  • Huttel, Yves
Data will be available upon reasonable request., The outstanding properties of bimetallic nanoparticles have made them the subject of extensive research, with ongoing efforts to refine their fabrication to better control their final properties. Silver-gold nanoparticles are one of the most representative binary systems owing to their wide range of applications. Herein, we present the fabrication of bimetallic silver-gold nanoparticles using a solvent-free, gas-phase synthesis method. With this method, the nanoparticle growth can be controlled precisely. We present the evolution of the size, composition and chemical structure of silver-gold nanoparticles as a function of the power used during fabrication, ranging from 4 nm to 10 nm. Nanoparticles display two main structures: core@shell (Au@Ag) and quasi-Janus, with both elements not fully segregated, and a thin Ag shell surrounding the nanoparticles. The nanoparticle size and population of each structure are power-dependent. The formation of these structures is discussed in terms of molecular dynamics simulations. Optical measurements revealed that the nanoparticles presented a clear plasmon resonance peak around 420 nm originating from the silver surface and a less sharp plasmon around 520 nm from the sum of gold plus the interaction of silver-containing nanoparticles. The oxidation of silver upon air exposure proceeds very slowly, preserving the nanoparticles’ properties over time., L.M. & Y.H. acknowledge the project PID2021-126524NB-100 and AM acknowledges CNS2023-144346 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”. Y.A., A.M., A. d A., L.M. and Y.H. acknowledge the Severo Ochoa Centres of Excellence program through Grants CEX2024-001445-S and CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic and plasmonic Au-Fe nanocolumnar thin films with tailored anisotropy

  • Garrido-Segovia, María
  • González Sagardoy, María Ujué
  • Magro, Raúl
  • Navarro, Elena
  • Espinosa, Ana
  • García-Martín, José Miguel
This work demonstrates the potential of two magnetic and plasmonic systems combining nanocolumnar gold (Au) and iron (Fe) in nanocolumnar bilayered thin films, fabricated using the glancing angle deposition (GLAD) by the sputtering technique. This approach successfully merges the unique properties of both nanostructured materials, offering a synergistic combination of optical and magnetic functionalities. The article details their morphological, structural, optical and magnetic characteristics, demonstrating how a surface plasmon resonance emerges under specific conditions. This feature enables the application of these systems in plasmonic applications. Furthermore, the magnetic characterization provides evidence for the existence of a perpendicular anisotropy contribution at the Fe/Au interface, thereby allowing for enhanced magnetic tunability and a broader range of magnetic applications. Lastly, the potential of the systems for in vitro biological applications will be investigated by studying the viability and adherence of tumor cells., The Ministerio de Universidades has supported this work through a Formación de Profesorado Universitario (FPU21/00272) grant (M. G.-S.). The authors also acknowledge funding from different projects. J.M.G.-M. thanks grant PID2021-126524NB-100 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. E. N. thanks PID2021- 123112OB-C21 funded by MICIIN and PID2024-156318OB-I00 funded by MICIU and TED2021-129688B-C21 funded by AEI. A. E. thanks PID2021-127033OB-C21 and PID2024-161273OB-C21 funded by MCIN/AEI/10.13039/501100011033 and CNS2023-144689 granted by the MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU”/PRTR, Comunidad de Madrid (ASAP-CM S2022/BMD-7434, LUNABRAINsingle bondCM TEC-2024/TEC) and CSIC (PIE-20226AT024 and Ayudas Incorporación de Científicos Titulares OEP (ref. 2024ICT15)). This work was supported by the Severo Ochoa Program for Centers of Excellence in R&D (CEX2024-001445-S), granted to the Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC). This study was carried out within the framework of the TRANSCAN-3 ERA-NET project TRANSCAN2024-2930-142_XPANTHER, with funding provided by the Asociación Española Contra el Cáncer (AECC) and the Instituto de Salud Carlos III (ISCIII). Finally, we express our gratitude to the Conexión Nanomedicina network from CSIC. All authors acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). Moreover, they also thank Raquel Álvaro for her help in the EDS measurements., Peer reviewed