Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

A Holistic Solution to Icing by Acoustic Waves: De-Icing, Active Anti-Icing, Sensing with Piezoelectric Crystals, and Synergy with Thin Film Passive Anti-Icing Solutions

  • Del Moral, Jaime
  • Ibáñez Ibáñez, Pablo Francisco
  • Rodríguez Valverde, Miguel Ángel
Icing has become a hot topic both in academia and in the industry given its implications in transport, wind turbines, photovoltaics, and telecommunications. Recently proposed de-icing solutions involving the propagation of acoustic waves (AWs) at suitable substrates may open the path for a sustainable alternative to standard de-icing or anti-icing procedures. Herein, the fundamental interactions are unraveled that contribute to the de-icing and/or hinder the icing on AW-activated substrates. The response toward icing of a reliable model system consisting of a piezoelectric plate activated by extended electrodes is characterized at a laboratory scale and in an icing wind tunnel under realistic conditions. Experiments show that surface modification with anti-icing functionalities provides a synergistic response when activated with AWs. A thoughtful analysis of the resonance frequency dependence on experimental variables such as temperature, ice formation, or wind velocity demonstrates the application of AW devices for real-time monitoring of icing processes., ERDF (FEDER) A way of making Europe PID2019-110430GB-C21 PID2019-109603RA-I00 PID2020-112620GB-I00 MCIN/AEI/10.13039/501100011033, European Commission EU H2020 program 899352
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Setting a comprehensive strategy to face the runback icing phenomena

  • Mora, Julio
  • García, Paloma
  • Carreño, Francisco
  • González, Miguel
  • Gutiérrez, Marcos
  • Montes, Laura
  • Rico, Victor J.
  • López-Santos, Carmen
  • Vicente Gómara, Adrián
  • Rivero Fuente, Pedro J.
  • Rodríguez Trías, Rafael
  • Larumbe Abuin, Silvia
  • Acosta, Carolina
  • Ibáñez-Ibáñez, Pablo
  • Corozzi, Alessandro.
  • Raimondo, Mariarosa
  • Kozera, Rafal
  • Przybyszewski, Bartlomiej
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Redondo, Francisco
  • Agüero, Alina
The development of anti-icing robust surfaces is a hot topic nowadays and particularly crucial in the aeronautics or wind energy sectors as ice accretion can compromise safety and power generation efficiency. However, the current performance of most anti-icing strategies has been proven insufficient for such demanding applications, particularly in large unprotected zones, which located downstream from thermally protected areas, may undergo secondary icing. Herein, a new testing methodology is proposed to evaluate accretion mechanisms and secondary icing phenomena through, respectively, direct impact and running-wet processes and systematically applied to anti-icing materials including commercial solutions and the latest trends in the state-of-the-art. Five categories of materials (hard, elastomeric, polymeric matrix, SLIPS and superhydrophobic) with up to fifteen formulations have been tested. This Round-Robin approach provides a deeper understanding of anti-icing mechanisms revealing the strengths and weaknesses of each material. The conclusion is that there is no single passive solution for anti-ice protection. Thus, to effectively protect a given real component, different tailored materials fitted for each particular zone of the system are required. For this selection, shape analysis of such a component and the impact characteristics of water droplets under real conditions are needed as schematically illustrated for aeronautic turbines., The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). The authors also thank the MINECO-AEI (MAT2016-79866-R, PID2019-109603RA-I00 and PID2019-110430GB-C21) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, to RTI2018-096262-B-C44–MAITAI, Multidisciplinary Approach for the Implementation of New Technologies to prevent Accretion of Ice on aircraft, funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia, Innovación y Universidades—Retos) and CSIC 202160E002-217538, for financial support. CLS thanks the University of Seville through the VI “Plan Propio de Investigación y Transferencia de la US”(VI PPIT-US) and the Ramon y Cajal Grant program.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Plasmas and acoustic waves to pattern the nanostructure and chemistry of thin films

  • Rico Gavira, Victor
  • Regodón Harkness, Guillermo Fernando
  • García Valenzuela, Aurelio
  • Marquez Alcaide, Antonio
  • Oliva Ramírez, Manuel
  • Rojas Ruiz, Teresa Cristina
  • Álvarez Molina, Rafael
  • Palomares Simón, Francisco Javier
  • Palmero Acebedo, Alberto
  • Rodríguez González-Elipe, Agustín
Embargado hasta 01/01/2100, In this work, piezoelectric AWs and plasmas have been brought together during the growth of a thin film as a novel methodology of plasma-assisted thin film structuration. The ensuing effects have been investigated on a model system where SiO2 and SiOx (x<2) thin films have been deposited by magnetron sputtering at oblique angles (MS-OAD) on an electro-acoustically excited LiNbO3 piezoelectric substrate under resonant conditions. The microstructure of the resulting films was 2D patterned and depicted submillimeter size intermingled zones with different optical characteristics, compositions (SiO2 and SiOx) and porosity, from highly porous to dense and compact regions. The 2D nanostructural pattern mimics the AW distribution and has been accounted for by means of a specific simulation model. It is concluded that the morphological and chemical film pattern replicates the distribution of polarization potential on the surface of the AW activated substrate immersed in the plasma. Moreover, we show that the main mechanism responsible for the appearance of domains with different morphology and chemical composition is the focused impingement of Ar+plasma ions on certain regions of the substrate. The general character of this patterning process, the underlying physics and its possibilities to tailor the composition and microstructure of dielectric thin film materials are discussed.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasma-Assisted Deposition of TiO2 3D Nanomembranes: Selective Wetting, Superomniphobicity, and Self-Cleaning

  • Montes, Laura
  • Román, José M.
  • García-Casas, Xabier
  • Castillo-Seoane, Javier
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • López-Santos, Carmen
  • Borrás, Ana
Fabrication of tunable wetting surfaces is sought for the last years given its importance on energy, biomaterials and antimicrobials, water purification, microfluidics, and smart surfaces. Liquid management on surfaces mainly depends on the control at the micro- and nanoscale of both roughness and chemical composition. Herein, the combination of a soft-template method and plasma-enhanced chemical vapor deposition is presented for the synthesis of TiO2 nanofibers on porous substrates such as cellulose and stainless-steel membranes. The protocol, carried out under mild conditions, produces 3D nanomembranes with superhydrophobicity and oleophilicity that are tested as microliter water/oil filters. Photoactivation of TiO2 by UV illumination provides a straightforward approach for wetting tunability that converts the surface into amphiphilic. A final chemical modification of the TiO2 nanofibers by embedding them in an elastomeric polymeric shell and by fluorine-based grafting opens the path toward the formation of superomniphobic and self-cleaning surfaces with long-lasting lifetimes. Thus, a reliable procedure is demonstrated for the fabrication of TiO2 nanofibers, which allows the modification of porous supports and provides an innovative route for the development of 3D nanomembranes with under design wetting. This protocol is extendable to alternative metal oxides, metals, and core@shell nanoarchitectures with potential multifunctionalities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron beam evaporated vs. magnetron sputtered nanocolumnar porous stainless steel: Corrosion resistance, wetting behavior and anti-bacterial activity

  • Bobaru, Stefania
  • Rico, Víctor J.
  • García-Valenzuela, Aurelio
  • López-Santos, Carmen
  • González-Elipe, Agustín R.
Stainless steel (SS), widely used because of its outstanding corrosion protection properties, does not possess any particular anti-stain or anti-bacterial activity as required for household and sanitary applications. This work reports the fabrication of SS thin films that, keeping a similar corrosion resistance than the bulk material, presents hydrophobicity and anti-bacterial activity. These thin films are prepared at ambient temperature by physical vapor deposition (PVD), either electron beam evaporation (EBE) or magnetron sputtering (MS), at oblique angles (OAD). According to their scanning electron microcopy and atomic force microscopy analysis, the microstructure of the OAD-SS thin films consisted of tilted and separated nanocolumns defining a surface topology that, characterized by a high percentage of void space, varied with the deposition conditions and procedure, either EBE or MS. It has been shown that particularly the nanocolumnar MS-OAD thin films preserved and even improved the high corrosion resistance of compact SS, as determined by electrochemical analysis. Besides, all OAD-SS thin films depict hydrophobicity and a high antibacterial activity. These features, particularly remarkable for the MS-OAD thin films, have been related with their tip-like termination at the surface and the existence of large void spaces separating the nanocolumns. This topology appears to affect negatively the bacteria’s deployment onto the surface and therefore the survival rate. Differences in the corrosion and antibacterial performance between EBE and MS-OAD thin films have been related with the specificities of these two PVD methods of thin film preparation. A relatively high abrasion resistance, as determined by abrasion tests, supports the use of MS-OAD thin films for the protection of commodity materials., Authors thank the FEDER program and AEI-MICINN (PID2019- 110430GB-C21, PID2019-109603RA-I0 and PID2020-112620GB-I00), the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects US-1263142, ref. AT17-6079, P18-RT-3480), and the EU through cohesion fund and FEDER 2014–2020 programs for financial support. The projects leading to this article have received funding from the EU H2020 Program under the grant agreements 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). One of us (SB) acknowledges the support of the Marie Curie Program of the EU to carry out this work. BSH is acknowledged for having proposed this work and contributed to its realization. CLS thanks the University of Seville through the VI PPIT-US., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin film nanostructuring at oblique angles by substrate patterning

  • Muñoz-Piña, Sandra
  • Alcaide, Antonio M.
  • Limones-Ahijón, Blanca
  • Oliva-Ramírez, Manuel
  • Rico, Víctor J.
  • Alcalá, Germán
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
  • Álvarez, Rafael
  • Wang, Dong
  • Schaaf, Peter
  • González-Elipe, Agustín R.
  • Palmero, Alberto
It is demonstrated that, besides classical nanocolumnar arrays, the oblique angle geometry induces the growth of singular structures in the nanoscale when using wisely designed patterned substrates. Well-ordered array of crosses, cylindrical nanorods or hole structures arranged in square or hexagonal regular geometries are reported as examples, among others. The fundamental framework connecting substrate topography and film growth at oblique angles is presented, allowing the use of substrate patterning as a feasible thin film nanostructuring technique. A systematic analysis of the growth of TiO2 thin films on 4 different lithographic patterned substrates in 4 different scale lengths is also presented. A first conclusion is the existence of a height-based selective growth in the initial stages of the deposition, by which the film preferentially develops on top of the tallest substrate features. This behavior is maintained until the film reaches a critical thickness, the so-called Oblivion Thickness, above which the film topography becomes gradually independent of the substrate features. A general formula relating the spatial features of the pattern, the coarsening exponent and the Oblivion Thickness has been deduced., The authors thank the financial support from MCIN/AEI/10.13039/ 501100011033 projects PID2019-110430GB-C21, PID2020-112620GBI00, PID2020-114270RA-I00 and RTI2018-098117-B-C21 (also financed by FEDER Una manera de hacer europa), the Junta de Andalucía (PAIDI- 2020 through projects P18-RT-3480 and P18-RT-6079, and through its 2019 PhD Researcher Hiring Program), the CSIC (2019AEP161 and 201860E050), the Regional Government of Madrid (project IND2017/ IND-7668 and YEI contract PEJ-2019-AI/IND-14451 with support from FSE), the H2020-EU.1.2.1-FET OPEN program (grant 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP), and the University of Seville (VI PPIT-US). The work is supported by the Deutsche Forschungsgemeinschaft (DFG, grant Scha 632/24, “Tailored Disorder” and Scha 632/27, “DFGGer ¨atezentrum”). This work is also supported by the free state of Thuringia under grants 2015 FGI 0025 305 (FastμXRD) and B715-10009 (BioMacroNano2020), all co-financed by the European Union within the framework of the European Regional Development Fund (ERDF). The service from the MiNa Laboratory at IMN-CNM (CSIC), funded from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E- 1794) and EU (FEDER, FSE), is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compositional gradients at the nanoscale in substoichiometric thin films deposited by magnetron sputtering at oblique angles: A case study on SiOx thin films

  • García-Valenzuela, Aurelio
  • Alcaide, Antonio M.
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Alcalá, Germán
  • Rojas, T. Cristina
  • Álvarez, Rafael
  • González-Elipe, Agustín R.
  • Palmero, Alberto
We demonstrate the existence of stoichiometric variations at the nanoscale when growing nanocolumnar SiO thin films by reactive magnetron sputtering deposition at oblique angles. Results show stoichiometric variations in the range 0.3 < x < 1.3 when growing a SiO thin film. This agrees with results from a numerical growth model that obtains a shift of the stoichiometry in all nanocolumns from lower values at the side facing the Si target to higher values at the opposite side. The different momentum distribution of the gaseous reactive and sputtered species results in preferential incorporation of the latter at a particular side of the nanocolumns. The general occurrence of this mechanism during the reactive magnetron sputtering deposition of substoichiometric thin films at oblique angles is discussed., The authors thank the FEDER program through AEI-MICINN (PID2019-110430GB-C21) and the Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480 and P18-RT-6079), the CSIC (2019AEP161 and 201860E050), the Regional Government of Madrid (project IND2017/IND-7668), the Spanish Ministry of Science and Innovation (PID2020-112620GB-I00, RTI2018-098117-B-C21, and PID2020-114270RA-I00), the H2020-EU.1.2.1-FET OPEN program (grant 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP), and the University of Seville (V and VI PPIT-US) for financial support. We also acknowledge the Centro Nacional de Aceleradores (CNA) for its support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of green Fs lasers to generate a superhydrophobic behavior in the surface of wind turbine blades

  • Rivera-Sahún, Joaquín
  • Porta-Velilla, Luis
  • Fuente, Germán F. de la
  • Angurel, Luis A.
This article belongs to the Special Issue Applications of Lasers in Polymer Science., Ice generation on the surface of wind generator blades can affect the performance of the generator in several aspects. It can deteriorate sensor performance, reduce efficiency, and cause mechanical failures. One of the alternatives to minimize these effects is to include passive solutions based on the modification of the blade surfaces, and in particular to generate superhydrophobic behavior. Ultra-short laser systems enable improved micromachining of polymer surfaces by reducing the heat affected zone (HAZ) and improving the quality of the final surface topography. In this study, a green fs laser is used to micromachine different patterns on the surface of materials with the same structure that can be found in turbine blades. Convenient optimization of surface topography via fs laser micromachining enables the transformation of an initially hydrophilic surface into a superhydrophobic one. Thus, an initial surface finish with a contact angle ca. 69° is transformed via laser treatment into one with contact angle values above 170°. In addition, it is observed that the performance of the surface is maintained or even improved with time. These results open the possibility of using lasers to control turbine blade surface microstructure while avoiding the use of additional chemical coatings. This can be used as a complementary passive treatment to avoid ice formation in these large structures., The authors gratefully acknowledge the financial support from the Spanish MCIN/AEI/10.13039/501100011033 (project PID2020-113034RB-I00), from EU H2020 Program under the grant agreements 899352 (FETOPEN-01-2018-2019-2020-SOUNDofICE) and from Gobierno de Aragón (research group T54_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and Void Connectivity in Nanocolumnar Thin Films Grown by Magnetron Sputtering at Oblique Angles

  • Álvarez, Rafael
  • Regodón Harkness, Guillermo Fernando
  • Acosta-Rivera, Hiedra
  • Rico, Víctor J.
  • Alcalá, Germán
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The morphology and void connectivity of thin films grown by a magnetron sputtering deposition technique at oblique geometries were studied in this paper. A well-tested thin film growth model was employed to assess the features of these layers along with experimental data taken from the literature. A strong variation in the film morphology and pore topology was found as a function of the growth conditions, which have been linked to the different collisional transport of sputtered species in the plasma gas. Four different characteristic film morphologies were identified, such as (i) highly dense and compact, (ii) compact with large, tilted mesopores, (iii) nanocolumns separated by large mesopores, and (iv) vertically aligned sponge-like coalescent nanostructures. Attending to the topology and connectivity of the voids in the film, the nanocolumnar morphology was shown to present a high pore volume and area connected with the outside by means of mesopores, with a diameter above 2 nm, while the sponge-like nanostructure presented a high pore volume and area, as well as a dense network connectivity by means of micropores, with a diameter below 2 nm. The obtained results describe the different features of the porous network in these films and explain the different performances as gas or liquid sensors in electrochromic applications or for infiltration with nanoparticles or large molecules., The authors acknowledge projects PID2020-114270RA-I00, PID2021-126524NB-I00, PID2021-123879OB-C21, and PID2020-112620GB-I00 funded by MCIN/AEI/10.13039/501100011033; project TED2021-130124A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU/PRTR; projects US-1380977 and US-1381045 funded by Fondo Europeo de Desarrollo Regional (FEDER) and Consejería de Transformación Económica, Industria, Conocimiento y Universidades de la Junta de Andalucía, within Programa Operativo FEDER 2014–2020; project P18-RT-3480 funded by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020), the H2020-EU.1.2.1-FET OPEN program (Grant No. 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP); and the University of Seville (VI PPIT-US). Guillermo Regodón would like to acknowledge funding from the European Comission-NextGenerationEU through the “Plan de Recuperación, Transformación y Resiliencia” from the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth dynamics of nanocolumnar thin films deposited by magnetron sputtering at oblique angles

  • Álvarez, Rafael
  • García-Valenzuela, Aurelio
  • Regodón, Guillermo
  • Ferrer, F. J.
  • Rico, Víctor J.
  • García-Martín, José Miguel
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The morphology of numerous nanocolumnar thin films deposited by the magnetron sputtering technique at oblique geometries and at relatively low temperatures has been analyzed for materials as different as Au, Pt, Ti, Cr, TiO, Al, HfN, Mo, V, WO and W. Despite similar deposition conditions, two characteristic nanostructures have been identified depending on the material: a first one defined by highly tilted and symmetric nanocolumnar structures with a relatively high film density, and a second one characterized by rather vertical and asymmetric nanocolumns, with a much lower film density. With the help of a model, the two characteristic nanostructures have been linked to different growth dynamics and, specifically, to different surface relaxation mechanisms upon the incorporation of gaseous species with kinetic energies above the surface binding energy. Moreover, in the case of Ti, a smooth structural transition between the two types of growths has been found when varying the value of the power used to maintain the plasma discharge. Based on these results, the existence of different surface relaxation mechanisms is proposed, which quantitatively explains numerous experimental results under the same conceptual framework., The authors acknowledge projects PID2020-114270RA-I00, PID2021-126524NB-I00, PID2021-123879OB-C21 and PID2020-112620GB-I00 funded by MCIN/AEI/10.13039/ 501100011033, project TED2021-130124A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGeneration EU /PRTR, projects US-1380977 and US-1381045 funded by Fondo Europeo de Desarrollo Regional (FEDER) and Consejería de Transformación Económica, Industria, Conocimiento y Universidades de la Junta de Andalucía, within Programa Operativo FEDER 2014- 2020, project P18-RT-3480 funded by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020), the H2020-EU.1.2.1-FET OPEN program (Grant 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP), and the University of Seville (VI PPIT-US). Guillermo Regodón would like to acknowledge funding from the European Comission-NextGenerationEU through the ‘Plan de Recuperación, Transformación y Resiliencia’ from the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A holistic solution to icing by acoustic waves: de-icing, active anti-icing, sensing with piezoelectric crystals, and synergy with thin film passive anti-icing solutions

  • Moral, Jaime del
  • Montes, Laura
  • Rico, Víctor J.
  • López-Santos, Carmen
  • Jacob, Stefan
  • Oliva-Ramírez, Manuel
  • Gil-Rostra, J.
  • Fakhfouri, Armaghan
  • Pandey, Shilpi
  • Gonzalez, Miguel
  • Mora, Julio
  • Garcia-Gallego, Paloma
  • Ibanez-Ibanez, Pablo F.
  • Rodriguez-Valverde, Miguel A
  • Winkler, Andreas
  • Borrás, Ana
  • González-Elipe, Agustín R.
20 pages including Supporting Information; 8 figures in the main text, Icing has become a hot topic both in academia and in the industry given its implications in transport, wind turbines, photovoltaics, and telecommunications. Recently proposed de-icing solutions involving the propagation of acoustic waves (AWs) at suitable substrates may open the path for a sustainable alternative to standard de-icing or anti-icing procedures. Herein, the fundamental interactions are unraveled that contribute to the de-icing and/or hinder the icing on AW-activated substrates. The response toward icing of a reliable model system consisting of a piezoelectric plate activated by extended electrodes is characterized at a laboratory scale and in an icing wind tunnel under realistic conditions. Experiments show that surface modification with anti-icing functionalities provides a synergistic response when activated with AWs. A thoughtful analysis of the resonance frequency dependence on experimental variables such as temperature, ice formation, or wind velocity demonstrates the application of AW devices for real-time monitoring of icing processes., J.D.M. and L.M. contributed equally to this work. The authors thank projects PID2019-110430GB-C21, PID2019-109603RA-I00, and PID2020-112620GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF (FEDER) A way of making Europe", by the "European Union". The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exalted dual-scale surface roughening in laser ablated aluminum capped with a transparent thin film: Wetting and anti-icing behavior

  • Ghemras, Ismail
  • Montes, Laura
  • López-Santos, Carmen
  • González-Elipe, Agustín R.
  • Rico, Víctor J.
Near infrared laser ablation of metals, specifically aluminum, has been systematically applied to generate surface roughness. Very high laser fluences may even lead to a so called “explosive” ablation regime where roughness becomes dramatically enhanced. In the present work we have developed an alternative methodology that, utilizing milder laser irradiation conditions (i.e. laser fluences from 0.37 to 0.72 J/cm2), renders aluminum surfaces with a dual-scale roughness character and Sp parameter values twice or even trice the value found in reference samples. This has been possible for aluminum substrates coated with a highly transparent aluminum oxynitride capping layer. The resulting surfaces, consisting of very rough partially oxidized aluminum with negligible amounts of nitrogen species, resulted highly hydrophobic and depicted long icing delay times as required for anti-icing applications. A correlation has been found between the wetting and anti-icing behaviors, the use of a capping layer and the laser irradiation conditions. To account for this exalted roughening phenomenon, we propose that the transparent capping layer confines the laser energy within the aluminum shallow zones, delays the formation of the plasma plume and produces an enhancement in the aluminum ablation, even at relatively low laser fluences., This work was supported by the General Directorate for Scientific Research and Technological Development (DGRSDT) of the High School Educational and Scientific Research Ministry (MESRS) of Algeria [Grant: P.N.E (2018-2019)]. Also, the project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). We also thank the AEI-MICINN (PID2019-110430GB-C21, PID2020-112620GBI00 and PID2019-109603RA-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe,” by the “European Union”. We acknowledge the financial support of the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía through the project US-1381045 as well as the EU through cohesion fund and FEDER 2014–2020 programs for financial support. Carmen López-Santos thanks the support of the University of Seville through the VI PPIT-US and the Ramón y Cajal Spanish National programs funded by MCIN/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Setting a comprehensive strategy to face the runback icing phenomena

  • Mora, J.
  • López García, Paloma
  • Carreño, F.
  • González, M.
  • Gutiérrez, M.
  • Montes, L.
  • Gavira, V. R.
  • López-Santos, Carmen
  • Vicente, A.
  • Rivero, P.
  • Rodríguez, R.
  • Larumbe, S.
  • Acosta, C.
  • Ibáñez-Ibáñez, P.
  • Corozzi, A.
  • Raimondo, M,
  • Kozera, R,
  • Przybyszewski, B,
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Redondo, F,
  • Agüero, A,
The development of anti-icing robust surfaces is a hot topic nowadays and particularly crucial in the aeronautics or wind energy sectors as ice accretion can compromise safety and power generation efficiency. However, the current performance of most anti-icing strategies has been proven insufficient for such demanding applications, particularly in large unprotected zones, which located downstream from thermally protected areas, may undergo secondary icing. Herein, a new testing methodology is proposed to evaluate accretion mechanisms and secondary icing phenomena through, respectively, direct impact and running-wet processes and systematically applied to anti-icing materials including commercial solutions and the latest trends in the state-of-the-art. Five categories of materials (hard, elastomeric, polymeric matrix, SLIPS and superhydrophobic) with up to fifteen formulations have been tested. This Round-Robin approach provides a deeper understanding of anti-icing mechanisms revealing the strengths and weaknesses of each material. The conclusion is that there is no single passive solution for anti-ice protection. Thus, to effectively protect a given real component, different tailored materials fitted for each particular zone of the system are required. For this selection, shape analysis of such a component and the impact characteristics of water droplets under real conditions are needed as schematically illustrated for aeronautic turbines., The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). The authors also thank the MINECO-AEI (MAT2016-79866-R, PID2019-109603RA-I00 and PID2019-110430GB-C21) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, to RTI2018-096262-B-C44–MAITAI, Multidisciplinary Approach for the Implementation of New Technologies to prevent Accretion of Ice on aircraft, funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia, Innovación y Universidades—Retos) and CSIC 202160E002-217538, for financial support. CLS thanks the University of Seville through the VI “Plan Propio de Investigación y Transferencia de la US”(VI PPIT-US) and the Ramon y Cajal Grant program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface Acoustic Waves Equip Materials with Active Deicing Functionality: Unraveled Deicing Mechanisms and Application to Centimeter Scale Transparent Surfaces

  • Jacob, Stefan
  • Pandey, Shilpi
  • Moral, Jaime del
  • Karimzadeh, Atefeh
  • Gil-Rostra, J.
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Winkler, Andreas
15 pages including Supporting Information; 7 figures in the main text, Migrating active deicing capabilities to transparent materials with low thermal conductivity has a high potential to improve the operations of several seminal industries in the automotive, robotic, energy, and aerospace sectors. However, the development of efficient and environmentally friendly deicing methods is yet in its infancy regarding their compatibility with end-user surfaces at relevant scales and real-world operations. Herein, we approach deicing through nanoscale surface activation enabled by surface acoustic waves (SAWs), allowing efficient on-demand deicing of surface areas spanning several square centimeters covered with thick layers of glace ice. We contemplate SAW-based deicing from a twofold perspective: First, we demonstrate its functionality both with a bulk piezoelectric material (LiNbO3) and a piezo-electric film (ZnO), the latter proving its versatile applicability to a large variety of functional materials with practical importance; second, we gain fundamental knowledge of the mechanisms responsible for efficient deicing using SAWs. In particular, we show that SAW vibrational modes easily transport energy over greater distances outside the electrode areas and efficiently melt large ice aggregates covering the materials' surfaces. In addition, the essential physics of SAW-based deicing is inferred from a carefully designed experimental and numerical study. We support our findings by providing macroscopic camera snapshots captured in situ inside a climate chamber during deicing and highly resolved laser-doppler vibrometer scans of the undisturbed wavefields at room temperature. Great care was taken to deposit the interdigital transducers (IDTs) used for SAW excitation only on ice-free areas close to the chip edges, leaving most of the substrate used for deicing unaltered and, as a matter of fact, demonstrating transparent deicing solutions., The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). The authors were grateful for the received funding that allowed the authors to conduct the research presented in the paper. Furthermore, the authors thank Steve Wohlrab for helping to prepare the LiNbO3 and ZnO devices. The authors also want to thank Armaghan Fakhfouri for supporting the numerical computations, and Michael Groesel for helping with the thermo-camera measurements.Open access funding enabled and organized by Projekt DEAL., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-lasting low fluorinated stainless steel hierarchical surfaces for omniphobic, anti-fouling and anti-icing applications

  • Montes, Laura
  • Rico, Víctor J.
  • Núñez-Gálvez, Fernando
  • Arenas, M. A.
  • Conde del Campo, Ana
  • López-Flores, Víctor
  • Espinós, J.P.
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • López-Santos, Carmen
Stainless steel (SS) alloys are prevalent in many industries, household appliances or other commodities, where a strict control of surface properties is required to tailor their interaction with the environment. In this work we report a new procedure of stainless steel surface processing that provides a multifunctional response including superhydrophobicity, omniphobicity, self-cleaning, anti-fouling and effective anti-icing capacity, while still preserving a corrosion resistance similar to that of this material in compact form. The method consists of a first nanostructuration step followed by a low fluorination. The nanostructured surfaces presented a dual scale roughness of hierarchical character. The liquid free approach developed in this work to get this singular surface nanostructuration entails a first laser treatment of stainless steel flat substrates, followed by the deposition of a nanostructured thin layer of this material by electron beam evaporation in an oblique angle configuration. The resulting hierarchical surfaces were subjected to fluorination by: (i) the plasma-assisted deposition of a thin Teflon-like coating or (ii) the grafting of fluorinated molecules. The self-cleanable, anti-adherent and ice repellent character of the resulting low fluorinated surfaces outperformed the behaviour of classical slippery surfaces obtained by the infusion of high amounts of fluorinated liquids. These hierarchical SS surfaces withstood mild abrasion tests and the effect of water jets. Moreover, the corrosion behaviour of the fluorinated surfaces determined through their potentiodynamic analysis revealed a similar corrosion resistance than the flat SS substrates. Outstandingly, after these corrosion tests, the fluorinated samples obtained by grafting preserved their surface functionalities without significant degradation. The high mechanical and chemical stability of these low fluorinated samples support their usage for a large variety of applications., The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 ( FETOPEN-01-2018-2019-2020 – SOUNDofICE ). The authors thank projects TED2021-130916B-I00 , and PID2022-143120OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”, by the “European Union". FNG and CLS thanks to the “ VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. CLS thanks the support of the Ramon y Cajal Spanish National programs funded by MCIN/AEI/10.13039/501100011033 . We thank particularly Juan Carlos Sanchez for the Confocal microscopy support at Institute of Materials Science of Seville (Spain), and Elmar Bonaccurso for the rain erosions test in Airbus Central R&T Materials laboratory- Munich (Germany)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in Hybrid Icing and Frosting Protection Strategies for Optics, Lens, and Photonics in Cold Environments Using Thin-Film Acoustic Waves

  • Ong, Hui Ling
  • Ji, Zhangbin
  • Haworth, Luke
  • Guo, Yihao
  • del Moral, Jaime
  • Jacob, Stefan
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Zhang, Jikai
  • Zhou, Jian
  • McHale, Glen
  • Fu, Yong Qing
Fogging, icing, or frosting on optical lenses, optics/photonics, windshields, vehicle/airplane windows, and solar panel surfaces have often shown serious safety concerns with hazardous conditions and impaired sight. Various active techniques, such as resistive heating, and passive techniques, such as icephobic treatments, are widely employed for their prevention and elimination. However, these methods are not always suitable, effective, or efficient. This review provides a comprehensive overview of the fundamentals and recent advances of transparent thin-film surface acoustic wave (SAW) technologies on glass substrates for monitoring and prevention/elimination of fogging, frosting, and icing. Key challenges related to fogging and icing on glass substrates are discussed, along with fundamental mechanisms that establish thin-film SAWs as optimal solution for these issues. Various types of thin-film acoustic wave technologies are discussed, including recent wearable and flexible SAW devices integrated onto glass substrates for expanding future applications. The focus of this review is on the principles and strategies for hybrid or integrated de-fogging/de-icing and sensing/monitoring functions. Finally, critical issues and future outlooks for thin-film-based SAW technology on glass substrates in industry applications are presented., This work was supported by the UK Fluids Network Special Interest Group of Acoustofluidics (EP/N032861/1), EPSRC Centre for Doctoral Training in Renewable Energy Northeast Universities (ReNU) for funding through grant EP/S023836/1, International Exchange Grant (IEC/NSFC/201078) through Royal Society and the Natural Science Foundation of China (NSFC), the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE), PID2022-143120OB-I00, PCI2024-153451 (m-era.net 3, GA 958174), and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER),” A way of making Europe, Fondos NextgenerationEU, and Plan de Recuperación, Transformación y Resiliencia.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Could Superhydrophobic Surfaces be a Realistic Solution for Running-Wet Areas?

  • Mora, Julio
  • López García, Paloma
  • Carreño, Francisco
  • Montes, Laura
  • López-Santos, Carmen
  • Rico, Víctor J.
  • Borrás, Ana
  • Redondo, Francisco José
  • González-Elipe, Agustín R.
  • Agüero, Alina
Definitions/Abbreviations IPS - Ice Protection Systems CB - Cassie-Baxter State SHP - Superhydrophobic AA - Aluminum Alloy STA - Stearic Acid PFOTES - 1H,1H,2H,2H-Perfluorooctyltriethoxysilane WCA - Water Contact Angle CAH - Contact Angle Hysteresis SA - Sliding Angle INTA - Instituto Nacional de Técnica Aeroespacial TAT - Total Air Temperature LWC - Liquid Water Content MVD - Median Volume Diameter PU - Polyurethane, Thermal ice protection systems (IPS) are used extensively in aeronautics. They are tailored according to the aircraft characteristics or flight envelope and can be used in different modes, anti-icing to avoid ice accretion or de-icing to remove the ice once accreted. A relevant issue by this application is the runback icing, caused by the downstream flow of melted or running water to unprotected areas, where activation is not possible in terms of energy consumption. Passive systems are being explored to complement or replace active systems, although, up to now, solutions have not been reported with the required performance for real-life applications. One of the most commonly reported anti-icing strategy relays on superhydrophobicity, i.e., it is based on the water roll-off capacity of Cassie-Baxter superhydrophobic surfaces (CB-SHP). Precisely, running wet phenomena, where liquid water is flowing on the surface, could be an appropiate application field for this type of materials. Herein, we have explored the behavior and limitations of a stable, newly developed, CB-SHP material to protect a runback section under icing conditions (temperature, air speed, liquid water content, droplet size distribution, and angle of attack) closer to those encountered in a wing airfoil.Two icing mechanisms, running-wet and direct impingement of supercooled microdroplets, have been evaluated for short (2 minutes) and long (10 minutes) period tests. It is found that the tested SHP material improved the performance of reference polyurethane (PU) paints, avoiding any ice accretion at low air speeds and low angles of attack., The SOUNDofICE project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement number 899352., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms of de-icing by surface rayleigh and plate lamb acoustic waves

  • Pandey, Shilpi
  • Moral, Jaime del
  • Montes, Laura
  • Gil-Rostra, Jorge
  • Frechilla, Alejandro
  • Rico, Víctor J.
  • López-Santos, Carmen
  • Koivuluoto, Heli
  • Angurel, Luis A.
  • Winkler, Andreas
  • Borrás, Ana
  • González-Elipe, Agustín R.
Special Section: Materials Technologies for Controlling Liquid Surface Interactions from Wetting to Icing.-- et al., Acoustic waves (AW) have recently emerged as an energy-efficient ice-removal procedure compatible with functional and industrial-relevant substrates. However, critical aspects at fundamental and experimental levels have yet to be disclosed to optimize their operational conditions. Identifying the processes and mechanisms by which different types of AWs induce de-icing are some of these issues. Herein, using model LiNbO<inf>3</inf> systems and two types of interdigitated transducers, the e-icing and anti-icing efficiencies and mechanisms driven by Rayleigh surface acoustic waves (R-SAW) and Lamb waves with 120 and 510 μm wavelengths, respectively, are analyzed. Through the experimental analysis of de-icing and active anti-icing processes and the finite element simulation of the AW generation, propagation, and interaction with small ice aggregates, it is disclosed that Lamb waves are more favorable than R-SAWs to induce de-icing and/or prevent the freezing of small ice droplets. Prospects for applications of this study are supported by proof of concept experiments, including de-icing in an icing wind tunnel, demonstrating that Lamb waves can efficiently remove ice layers covering large LN substrates. Results indicate that the de-icing mechanism may differ for Lamb waves or R-SAWs and that the wavelength must be considered as an important parameter for controlling the efficiency., The authors thank the projects PID2022-143120OB-I00 and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER)” A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. CLS thanks the University of Seville through the VI PPIT-US and “Ramon y Cajal” program funded by MCIN/AEI/10.13039/501100011033. This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidation of Amorphous Porous VOx at Low Temperatures for the Formation of Thermochromic VO2 Films

  • Acosta-Rivera, Hiedra
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Rojas, Teresa Cristina
  • Álvarez, Rafael
  • Martin, Nicolas
  • González-Elipe, Agustín R.
  • Palmero, Alberto
This article belongs to the Special Issue Advances and Innovations in Glancing Angle Deposition and Related Nanostructures., Thermochromic VO2 crystalline domains have been formed in amorphous nanocolumnar VOx films by means of a low-temperature oxidation process. The oxidation of an amorphous film with [O]/[V] below 1.9 favors the formation of VO2, V3O7, and V2O5 crystalline domains in the material for temperatures as low as 260 °C, while values above 1.9 lead to the sole formation of the V2O5 phase. It is found that the absorption of oxygen also causes a relevant film volume expansion that makes pores shrink. Under some specific conditions, low-temperature oxidation causes the near disappearance of the amorphous regions, clearly improving the overall transparency and optimizing the optical and electrical modulation capabilities associated with the presence of crystalline VO2 domains. The best thermochromic performance was found when the original stoichiometry was [O]/[V] = 1.5 and the oxidation temperature was 280 °C. These conditions yield a relatively transparent coating in the visible range that presents an optical modulation in the near-infrared range of nearly 50% and a drop of electrical resistivity of more than two orders of magnitude, with a transition temperature of 50.3 °C. A tentative model based on the volume expansion experienced by the film upon oxidation is proposed, which links the structural/chemical features of the material and the formation of the crystalline domains at such relatively low temperatures., We, the authors, thank the projects PID2020-112620GB-I00, PID2021-123879OB-C21, PID2022-143120OB-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, Fondos NextGeneration EU, and “Plan de Recuperación, Transformación y Resiliencia”, as well as the intramural project 202560E034, funded by the Spanish National Council of Research. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020–SOUNDofICE). The project leading to this article received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acoustic Wave-Powered Durable Icephobic Duplex Coating Design with Superior Deicing Performance

  • Moral, Jaime del
  • Haworth, Luke
  • Montes, Laura
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
  • Rico, Víctor J.
  • Czermak, Triana
  • Carreño, Francisco
  • García-Gallego, Paloma
  • Mora, Julio
  • López-Santos, Carmen
  • Winkler, Andreas
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Fu, Yongqing
Piezoelectric thin film-based surface acoustic wave (SAW) deicing technology has recently emerged as an attractive and energy-efficient alternative with direct applications across multiple industrial sectors. However, the generation of SAWs on piezoelectric thin films, such as ZnO, faces diverse challenges, including its low long-term stability and variable wetting properties upon exposure to UV radiation and other environmental hazards. To overcome these challenges, we propose a bilayer coating design that integrates a diamond-like carbon (DLC) thin film with an atop CFx layer (DLC-CFx). This design is intended to serve as both an anti-icing and a protective coating for ZnO SAW devices built on aluminum substrates, which are specifically selected for critical ice-exposed applications in the aeronautics or wind turbine industries. We demonstrate that, unlike the implementation of single fluorinated polymer layers, such as commercial CYTOP, the DLC-CFx hydrophobic duplex coating effectively protects the ZnO surfaces while maintaining optimal SAW transmission and wave propagation and reducing the fluorine content. The SAW-induced deicing on these devices is achieved through a highly effective mechanism involving the interfacial ice melting, followed by a rapid ice sliding detachment for both small ice droplets and large ice aggregates. Experiments at laboratory scale and in an icing wind tunnel facility reveal that deicing involves SAW activation of the interface between the ice and the DLC-CFx bilayer, as well as an effective thermal contribution resulting from the rapid heat transmission through the aluminum substrate. Our studies demonstrate that the highly conformal deposition of DLC-CFx through a room temperature plasma-assisted method ensures reliability and long-term stability of thin-film-based acoustic wave devices in harsh outdoor conditions., The authors thank the ICMS services Surface Analysis and Surface Wettability Determination and the projects PID2022-143120OB-I00 and TED2021-130916B-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER)”, A way of making Europe, Fondos NextGeneration EU, and Plan de Recuperación, Transformación y Resiliencia. This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE) and CSIC Intramural projects, 202460E235 and 202160E002. The work is also funded by the EPSRC Centre for Doctoral Training in Renewable Energy Northeast Universities (ReNU) (Grant No. EP/S023836/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of near-edge Laser-Induced Periodic Surface Structures (LIPSS) on the electrical properties of fs laser-machined ITO microcircuits

  • Frechilla, Alejandro
  • Martínez Fernández, Elena
  • Moral, Jaime del
  • López-Santos, Carmen
  • Frechilla, Javier
  • Nuñez-Galvez, Fernando
  • López-Flores, Víctor
  • Fuente, Germán F. de la
  • Hülagü, Deniz
  • Bonse, Jörn
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Angurel, Luis A.
Scalable, cost-effective methods for processing transparent electrodes at the microscale are pivotal to advancing in electrochemistry, optoelectronics, microfluidics, and energy harvesting. In these fields, the precise fabrication of micrometric circuits and patterns plays a critical role in determining device performance, material compatibility, and integration with added-value substrates. In this context, Laser Subtractive Manufacturing stands out as a suitable microfabrication technique for its adaptability to diverse materials and complex configurations, as well as its straightforward scalability, affordability, and eco-friendly nature. However, a challenge in micromachining metals and metal oxides is the inherent formation of Laser-Induced Periodic Surface Structures (LIPSS), which can significantly impair electrical conductivity, particularly when circuit dimensions fall within the micrometer range. Herein, we investigate the micromachining of electrical microcircuits using ultrashort pulse laser systems applied to transparent indium tin oxide (ITO) thin films. We analyze the formation of LIPSS at the edges of the micromachined regions associated with the Gaussian distribution of the energy within the laser spot, and the impact of these structures on the electrical properties of the circuits. Thus, we systematically evaluate the influence of LIPSS orientation and periodicity by fabricating various circuit patterns using femtosecond lasers at green (515 nm) and ultraviolet (UV) (343 nm) wavelengths. A correlation between electrical resistivity measurements and microstructure analysis, as determined by field emission scanning electron and transmission electron microscopy, reveals distinct effects of the formed nanostructures depending on the laser source and its polarization. For the green wavelength, the edge side regions where LIPSS are oriented perpendicular to the ITO track exhibit a resistance higher by a factor just above two compared to those where LIPSS are parallel. Additionally, UV laser processing results in a pronounced reduction of ITO thickness at the boundary between the LIPSS region and the substrate. The mechanisms for the formation of LIPSS with both wavelengths are also discussed. Furthermore, we have determined that in narrow conductive tracks with a width ranging from 6 to 8 µm, the impact of LIPSS is particularly significant because the LIPSS structured region occupies a dominant fraction of the total width., The authors are grateful for funding from the European Commission EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE), from the Spanish research projects PID2020-113034RB-I00 (funded by MCIN/AEI/ 10.13039/501100011033), PID2023-146041OB-C21 (funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU) and TED2021-130916B-I00 (funded by MICIU/AEI/10.13039/501100011033, ERDF (FEDER) A way of making Europe, Fondos Nextgeneration EU and Plan de Recuperación, Transformación y Resiliencia) and from the Government of Aragón (Research Group T54_23R). Authors also thank the use of Servicio General de Apoyo a la Investigación – SAI and the Spanish National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas (LMA)” at Universidad de Zaragoza and Servicio de Microscopía Electrónica de Barrido de Alta Resolución at Universidad Pablo de Olavide., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of polyurethane coatings modification with organosilicon compounds on their hydro- and icephobic properties

  • Łabęda, Anna
  • Kozera, Rafał
  • Przybyszewski, Bartłomiej
  • Ziętkowska, Katarzyna
  • Boczkowska, Anna
  • Sztorch, Bogna
  • Przekop, Robert E.
  • Borrás, Ana
The problem of icing is evident in many industry sectors. One of the most affected is aviation. Icing not only causes loss of aerodynamic properties and economic losses but also threatens safety. In the present study, an attempt was made to increase the hydrophobic and icephobic properties of polyurethane coatings in the aviation industry. Modification with in-lab synthesised organosilicon compounds in the form of Polyhedral Oligomeric Silsesquioxanes (POSS) was carried out. The modifiers that contained different functional groups were especially designed to tailor and increase hydro- and icephobic properties. The coatings were deposited by air spraying and evaluated using contact angle measurements at room and subzero temperatures, analysis of ice adhesion strength, freezing delay time, surface roughness via optical profilometry, and microstructure observed through scanning electron microscopy. Reduction of contact angle hysteresis (up to 50%) and roll-off angle (up to 45%) in comparison to a reference sample were observed. The investigation revealed that organosilicon-modified coatings significantly reduce ice adhesion (by up to 56%) and triple the freezing delay time relative to non-modified references, while also enhancing surface hydrophobicity. These findings confirm the effectiveness of targeted molecular modifications in advancing anti-icing surface design for aerospace applications., This research was funded by European Union in the frame of EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020—SOUNDofICE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Icing monitoring with thickness shear acoustic waves

  • Moral, Jaime del
  • González del Val, Miguel
  • Rico, Víctor J.
  • Sánchez-Valencia, J. R.
  • Mora, Julio
  • García Gallego, Paloma
  • Carreño, Francisco
  • Winkler, Andreas
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Jacob, Stefan
Icing monitoring and ice detection are critical challenges across many industries where ice formation can severely degrade performance or compromise safety. Conventional ice-sensing approaches, such as those based on surface acoustic waves (SAWs), often suffer from limited selectivity, fast saturation, and slow or energy-consuming recovery. In this work, we propose the use of thickness-shear-mode bulk acoustic waves (TSM-AWs) as a selective and robust alternative for monitoring icing phenomena, ranging from frozen sessile droplets to ice accretion in near-real scenarios within aeronautical envelopes. The sensing platform consists of a LiNbO₃ plate activated through lateral-field-excitation electrodes and driven electronically by a Vector or Scalar Network Analyzer. This system reliably detects both freezing conditions and temperature variations. Tracking the evolution of the magnitude of the reflection coefficient, specifically, the resonance peak and shape and frequency of|S11| minimum, of a strongly shear-dominant mode provides a reliable means to characterize and extract both qualitative and quantitative information about icing processes. Finite-element simulations further elucidate the physical mechanisms governing the ice monitoring capabilities. These results position TSM AW devices as promising candidates for a new generation of simple, light-weight, highly sensitive, and robust acoustic wave icing sensors., The authors thank the projects PID2022-143120OB-I00 and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF (FEDER)" A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. Project DGP_PIDI_2024_02239 funded by Consejería de Universidad, Investigación e Innovación of Junta de Andalucía and Project 202460E235 funded by CSIC. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). The authors acknowledge the Wettability Characterization Service from ICMS for providing access to their facilities. The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (H2020-FETOPEN-2018-2019-2020-01 SoundOfIce)., No
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Use of green fs lasers to generate a superhydrophobic behavior in the surface of wind turbine blades

  • Rivera-Sahún, Joaquín
  • Porta-Velilla, Luis
  • de la Fuente, Germán F.
  • Angurel, Luis A.
Ice generation on the surface of wind generator blades can affect the performance of the generator in several aspects. It can deteriorate sensor performance, reduce efficiency, and cause mechanical failures. One of the alternatives to minimize these effects is to include passive solutions based on the modification of the blade surfaces, and in particular to generate superhydrophobic behavior. Ultra-short laser systems enable improved micromachining of polymer surfaces by reducing the heat affected zone (HAZ) and improving the quality of the final surface topography. In this study, a green fs laser is used to micromachine different patterns on the surface of materials with the same structure that can be found in turbine blades. Convenient optimization of surface topography via fs laser micromachining enables the transformation of an initially hydrophilic surface into a superhydrophobic one. Thus, an initial surface finish with a contact angle ca. 69° is transformed via laser treatment into one with contact angle values above 170°. In addition, it is observed that the performance of the surface is maintained or even improved with time. These results open the possibility of using lasers to control turbine blade surface microstructure while avoiding the use of additional chemical coatings. This can be used as a complementary passive treatment to avoid ice formation in these large structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanisms of De-icing by Surface Rayleigh and Plate Lamb Acoustic Waves

  • Pandey, Shilpi
  • del Moral, Jaime
  • Jacob, Stefan
  • Montes, Laura
  • Gil-Rostra, Jorge
  • Frechilla, Alejandro
  • Karimzadeh, Atefeh
  • Rico, Victor J.
  • Kanter, Raul
  • Kandelin, Niklas
  • López-Santos, Carmen
  • Koivuluoto, Heli
  • Angurel, Luis
  • Winkler, Andreas
  • Borrás, Ana
  • González-Elipe, Agustin R.
Acoustic waves (AW) have recently emerged as an energy‐efficient ice‐removal procedure compatible with functional and industrial‐relevant substrates. However, critical aspects at fundamental and experimental levels have yet to be disclosed to optimize their operational conditions. Identifying the processes and mechanisms by which different types of AWs induce de‐icing are some of these issues. Herein, using model LiNbO3 systems and two types of interdigitated transducers, the e‐icing and anti‐icing efficiencies and mechanisms driven by Rayleigh surface acoustic waves (R‐SAW) and Lamb waves with 120 and 510 μm wavelengths, respectively, are analyzed. Through the experimental analysis of de‐icing and active anti‐icing processes and the finite element simulation of the AW generation, propagation, and interaction with small ice aggregates, it is disclosed that Lamb waves are more favorable than R‐SAWs to induce de‐icing and/or prevent the freezing of small ice droplets. Prospects for applications of this study are supported by proof of concept experiments, including de‐icing in an icing wind tunnel, demonstrating that Lamb waves can efficiently remove ice layers covering large LN substrates. Results indicate that the de‐icing mechanism may differ for Lamb waves or R‐SAWs and that the wavelength must be considered as an important parameter for controlling the efficiency.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Structure and void connectivity in nanocolumnar thin films grown by magnetron sputtering at oblique angles

  • Álvarez, Rafael
  • Regodón, Guillermo
  • Acosta-Rivera, Hiedra
  • Rico, Víctor
  • Alcalá Penadés, Germán
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The morphology and void connectivity of thin films grown by a magnetron sputtering deposition technique at oblique geometries were studied in this paper. A well-tested thin film growth model was employed to assess the features of these layers along with experimental data taken from the literature. A strong variation in the film morphology and pore topology was found as a function of the growth conditions, which have been linked to the different collisional transport of sputtered species in the plasma gas. Four different characteristic film morphologies were identified, such as (i) highly dense and compact, (ii) compact with large, tilted mesopores, (iii) nanocolumns separated by large mesopores, and (iv) vertically aligned sponge-like coalescent nanostructures. Attending to the topology and connectivity of the voids in the film, the nanocolumnar morphology was shown to present a high pore volume and area connected with the outside by means of mesopores, with a diameter above 2 nm, while the sponge-like nanostructure presented a high pore volume and area, as well as a dense network connectivity by means of micropores, with a diameter below 2 nm. The obtained results describe the different features of the porous network in these films and explain the different performances as gas or liquid sensors in electrochromic applications or for infiltration with nanoparticles or large molecules.