Pasar al contenido principal

ADVANCING SUPERCAPACITORS WITH PLASMA-DESIGNED MULTIFUNCTIONAL HYBRID MATERIALS

PCI2024-153451

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Afrontar las Prioridades de Nuestro Entorno
Subprograma Subprograma Estatal de Internacionalización
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2024
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triboelectric pixels as building blocks for microscale and large-area integration of drop energy harvesters

  • Ghaffarinejad, Ali
  • García-Casas, Xabier
  • Núñez-Gálvez, Fernando
  • Budagosky, Jorge
  • Godinho, Vanda
  • López-Santos, Carmen
  • Sánchez-Valencia, Juan Ramón
  • Barranco, Ángel
  • Borrás, Ana
The dataset of this article has been deposited at digital.csic under the DOI https://doi.org/10.20350/digitalCSIC/16536 and is publicly available as of the publication date. All original code for the NanoDataLyzer has been deposited at Zenodo under the DOI https://doi.org/10.5281/ZENODO.13225385. Any additional information required to reanalyze the data reported in this paper is available from the lead contact upon request, Triboelectric nanogenerators (TENGs) are the most promising technology for harvesting energy from low-frequency liquid flows and impacts such as rain droplets. However, current drop energy harvester technologies suffer from low output power due to limitations in triboelectric materials, suboptimal device designs, and the inability to fully capture the kinetic energy of falling drops. This article introduces a microscale TENG capable of efficiently converting drop impact energy into electrical power in a single, rapid step. The device features a capacitive structure that enhances energy conversion through instantaneous capacitance changes when the drops contact the submillimetric top electrodes. This compact design establishes a path toward the development of dense arrays and rain panels and is adaptable to various liquids, scales, triboelectric surfaces, and thin-film configurations, including flexible and transparent materials., The authors thank the projects PID2022-143120OB-I00, PCI2024-153451, and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia.” C.L.-S. thanks the University of Seville through the VI PPIT-US and “Ramón y Cajal” program funded by MCIN/AEI/10.13039/501100011033. J.R.S.-V. acknowledges project ANGSTROM selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement no. 958174). X.G.-C. acknowledges the FPU program under grant number FPU19/01864. FNG acknowledges the “VII Plan Propio de Investigación y Transferencia” of the Universidad de Sevilla. The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in Hybrid Icing and Frosting Protection Strategies for Optics, Lens, and Photonics in Cold Environments Using Thin-Film Acoustic Waves

  • Ong, Hui Ling
  • Ji, Zhangbin
  • Haworth, Luke
  • Guo, Yihao
  • del Moral, Jaime
  • Jacob, Stefan
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Zhang, Jikai
  • Zhou, Jian
  • McHale, Glen
  • Fu, Yong Qing
Fogging, icing, or frosting on optical lenses, optics/photonics, windshields, vehicle/airplane windows, and solar panel surfaces have often shown serious safety concerns with hazardous conditions and impaired sight. Various active techniques, such as resistive heating, and passive techniques, such as icephobic treatments, are widely employed for their prevention and elimination. However, these methods are not always suitable, effective, or efficient. This review provides a comprehensive overview of the fundamentals and recent advances of transparent thin-film surface acoustic wave (SAW) technologies on glass substrates for monitoring and prevention/elimination of fogging, frosting, and icing. Key challenges related to fogging and icing on glass substrates are discussed, along with fundamental mechanisms that establish thin-film SAWs as optimal solution for these issues. Various types of thin-film acoustic wave technologies are discussed, including recent wearable and flexible SAW devices integrated onto glass substrates for expanding future applications. The focus of this review is on the principles and strategies for hybrid or integrated de-fogging/de-icing and sensing/monitoring functions. Finally, critical issues and future outlooks for thin-film-based SAW technology on glass substrates in industry applications are presented., This work was supported by the UK Fluids Network Special Interest Group of Acoustofluidics (EP/N032861/1), EPSRC Centre for Doctoral Training in Renewable Energy Northeast Universities (ReNU) for funding through grant EP/S023836/1, International Exchange Grant (IEC/NSFC/201078) through Royal Society and the Natural Science Foundation of China (NSFC), the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 – SOUNDofICE), PID2022-143120OB-I00, PCI2024-153451 (m-era.net 3, GA 958174), and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER),” A way of making Europe, Fondos NextgenerationEU, and Plan de Recuperación, Transformación y Resiliencia.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile integration of single-crystalline phthalocyanine nanowires and nanotrees as photo-enhanced conductometric sensors

  • Filippin, A Nicolás
  • Campos-Lendinez, Ángel
  • Delgado-Alvarez, Juan
  • Moreno-Martinez, Gloria
  • Castillo-Seoane, Javier
  • Rico, Víctor J.
  • Godinho, Vanda
  • Barranco, Ángel
  • Sanchez-Valencia, Juan R
  • Borrás, Ana
Chemicals and CAS Registry Numbers oxygen 7782-44-7 phthalocyanine 574-93-6, This article is part of the themed collection: Synthesis, physical properties and applications of advanced nanocrystalline materials, This article presents a reproducible and affordable methodology for fabricating organic nanowires (ONWs) and nanotrees (ONTs) as light-enhanced conductometric O2 sensors. This protocol is based on a solventless procedure for the formation of high-density arrays of nanowires and nanotrees on interdigitated electrodes. The synthesis combines physical vapour deposition for the self-assembled growth of free-phthalocyanine nanowires and soft plasma etching to prompt the nucleation sites on the as-grown ONWs to allow for the formation of nanotrees. Electrical conductivity in such low-dimensional electrodes was analysed in the context of density, length, and interconnection between nanowires and nanotrees. Furthermore, the electrodes were immersed in water to improve the nanowires' connectivity. The response of the nanotrees as conductometric O2 sensors was tested at different temperatures (from room temperature to 100 °C), demonstrating that the higher surface area exposed by the nanotrees, in comparison with that of their polycrystalline thin film counterparts, effectively enhances the doping effect of oxygen and increases the response of the ONT-based sensor. Both organic nanowires and nanotrees were used as model systems to study the augmented response of the sensors provided by illumination with white or monochromatic light to organic semiconducting systems. Interestingly, the otherwise negligible sensor response at room temperature can be activated (On/Off) under LED illumination, and no dependency on the illumination wavelength in the visible range was observed. Thus, under low-power LED illumination with white light, we show a response to O2 of 16% and 37% in resistivity for organic nanotrees at room temperature and 100 °C, respectively. These results open the path to developing room temperature long-lasting gas sensors based on one- and three-dimensional single-crystalline small-molecule nanowires., The authors thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and “ERDF (FEDER)” A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unlocking the hybrid piezo and pyroelectric nanogenerators performance by SiO2 nanowires confinement in poly(vinylidene fluoride)

  • Delgado-Álvarez, Juan
  • Krishna- Mishra, Hari
  • Aparicio, Francisco J.
  • García-Casas, Xabier
  • Barranco, Ángel
  • Sánchez-Valencia, J. R.
  • López-Flores, Víctor
  • Borrás, Ana
We report on the development of a novel flexible piezo/pyro-electric nanogenerator (PPNG) that combines a uniform film of poly(vinylidene fluoride) (PVDF) infiltrated into vertically supported SiO2 nanowires (NWs) to enhance both piezoelectric and pyroelectric energy harvesting capabilities. The synthetic procedure involves a low-temperature, multi-step approach, including the soft-template formation of SiO2 NWs on a flexible substrate, followed by the infiltration of a PVDF thin film (TF). The plasma-enabled fabrication of SiO2 NWs facilitated vertical alignment and precise control over the surface microstructure, density, and thickness of the confined nanostructures. These strategic structural systems promote the development of the most favorable electroactive β- and γ-phases in the PVDF matrix. Notably, electrical poling plays a major role in aligning the random dipoles of the PVDF macromolecular chain in a more ordered fashion to nucleate the amplified electroactive phases. The electrostatic interaction between PVDF and SiO2 NWs, which helps to facilitate the electroactive phase, is confirmed by the surface potential distribution. As a proof-of-concept, the fabricated PPNG exhibited a significant improvement in the instantaneous piezoelectric output power density (P), with a ∼9-fold amplification relative to its bare PVDF TF counterpart. In addition, PPNG has demonstrated excellent stability and durability. Analogously, the pyroelectric coefficient (p) demonstrated a 4-fold superior performance compared to the reference PVDF TF-based PPNG. Thus, the engineered system of SiO2 NWs@PVDF comprising PPNG offers a promising pathway toward multisource energy harvesting capabilities through efficient energy transduction at mechanical excitation frequencies of 10–12 Hz and across a temperature difference of 9–22 K., The authors thank Project Nos. PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe,” Fondos NextGenerationEU and “Plan de Recuperación, Transformación y Resiliencia.” Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 Grant Agreement No. 958174). The project leading to this article has received funding from the EU H2020 program under Grant Agreement No. 851929 (ERC Starting Grant 3DScavengers). V.L.F. acknowledges the support of the VI Plan Propio de Investigación y Transferencia (VI PPIT) of the University of Seville., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Material Unlocking the hybrid piezo and pyroelectric nanogenerators performance by SiO2 nanowires confinement in poly(vinylidene fluoride)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Luminous Transmission and Solar Modulation in Thermochromic VO2 Aerogel-like Films via Remote Plasma Deposition

  • Obrero-Pérez, José M.
  • Moreno, Gloria P.
  • Rojas, T. Cristina
  • Ferrer-Fernández, Francisco J.
  • Moscoso, Francisco G.
  • Contreras-Bernal, Lidia
  • Castillo-Seoane, Javier
  • Núñez-Gálvez, Fernando
  • Aparicio, Francisco J.
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Material suplementario en disponible en: https://doi.org/10.1021/acsami.5c07264, Vanadium dioxide (VO2) is a thermochromic material that undergoes a phase transition from a monoclinic semiconducting state to a rutile metallic state at 68 °C, a temperature close to room temperature. This property makes VO2 particularly valuable in applications such as optical and electrical switches, data storage, neuromorphic computing, and remarkably dynamic smart windows for solar radiation control. VO2 typically needs to be synthesized for these applications as nanostructured thin films. Over the past few decades, significant efforts have been made to control the thermochromic properties of VO2 through crystal structure tuning, doping, and the development of VO2 nanocomposites. Additionally, introducing nano- and mesoporosity has been shown to enhance the optical properties of thermochromic VO2 films. This study presents a methodology for producing highly porous, aerogel-like V2O5 films, which can be thermally processed to form aerogel-like VO2 films. This process is based on sequential plasma polymerization and plasma etching to produce aerogel-like V2O5 films that are annealed to yield ultraporous nanocrystalline VO2 films. The sacrificial vanadium-containing plasma polymers are obtained by remote plasma-assisted vacuum deposition (RPAVD) using vanadyl porphyrin as a precursor and Ar as plasma gas. Additional reference compact films VO2 films are obtained by a direct RPAVD process using the same precursor and oxygen plasmas in combination with thermal annealing. The aerogel-like VO2 films show exceptional thermochromic performance with luminous transmittances higher than 54%, solar modulation up to 18.8%, and IR modulation up to 35.5%. The presented plasma methodology is versatile, allowing both the synthesis of VO2 plasmonic structures to enhance the thermochromic response and the encapsulation of films to improve their stability in air dramatically. Additionally, this solvent-free synthetic method is fully compatible with doping procedures, scalable, and holds great potential for designing and optimizing smart window coatings., We thank the projects PID2022-143120OB-I00, TED2021-130916B–I00, PCI2024-153451, and PID2021-123879OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos Nextgeneration EU, and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). We also thank the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480) and CSIC (ref 202360086). The project leading to this article has also received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Temperature Remote Plasma Synthesis of Highly Porous TiO2 as Electron Transport Layers in Perovskite Solar Cells

  • Obrero-Pérez, José M.
  • Núñez-Gálvez, Fernando
  • Contreras-Bernal, Lidia
  • Castillo-Seoane, Javier
  • Moreno, Gloria P.
  • Czermak, Triana
  • Aparicio, Francisco J.
  • Rojas, T. Cristina
  • Ferrer, F. J.
  • Borrás, Ana
  • Barranco, Ángel
  • Sánchez-Valencia, J. R.
Halide perovskite solar cells (PSCs) offer high efficiency at low production costs, making them a promising solution for future photovoltaic technologies. Optimizing charge transport layers is crucial, with porous TiO2 widely used as electron transport layers (ETLs) due to their suitable energy band alignment, transparency, and abundance. However, their performance depends strongly on crystallinity, requiring high-temperature processing (>450 °C), which increases costs and limits their applicability on flexible substrates. Low-temperature wet-chemical methods face scalability issues due to material waste and hazardous solvents. Therefore, plasma-based technologies provide a scalable, eco-friendly alternative for fabricating oxide-based ETLs. This study presents a plasma-based synthesis of TiO2 layers using remote plasma-assisted vacuum deposition (RPAVD) and soft plasma etching (SPE) at temperatures below 200 °C, enabling precise control over microstructure and porosity. The resulting nanocolumnar and aerogel-like TiO2 films are antireflective and enhance optical and electronic properties, leading to improved PSC efficiency (champion PCE = 14.6%) comparable to high-temperature processed devices. The devices are based on a 3D organometal perovskite with mixed cations (MA, FA, Cs, Rb) and halides (I, Br), with a nominal composition of (Rb0.03Cs0.03FA0.69MA0.25)(PbI3)0.83(PbBr3)0.17. Our results highlight the potential of RPAVD+SPE for producing low-temperature ETLs, offering a feasible, industrially scalable solution for flexible, high-performance photovoltaics., The authors thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, Fondos Nextgeneration EU and “Plan de Recuperación, Transformación y Resiliencia”. The authors also want to thank CSIC for its financial support through the Interdisciplinary Thematic Platform (PTI) Transición Energética Sostenible (PTI-TRANSENER+). Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of 49 funding organizations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting perovskite solar cell stability: Dual protection with ultrathin plasma polymer passivation layers

  • Nabil, Mahmoud
  • Contreras-Bernal, Lidia
  • Moreno-Martinez, Gloria
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Anta, Juan A.
  • Oskam, Gerko
  • Pistor, Paul
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Metal halide perovskite solar cells (MHPSCs) hold great promise due to their high efficiency and low fabrication costs, but their long-term stability under environmental conditions remains the main challenge. However, their long-term operational stability under environmental stress remains a critical limitation for commercialization. In this work, we explore a dual passivation strategy using ultrathin adamantane-based plasma polymer (ADA) films, deposited via remote plasma-assisted vacuum deposition (RPAVD), to enhance the environmental stability of MHPSCs. The ADA layers are introduced simultaneously at both the electron transport layer (ETL)/perovskite and perovskite/hole transport layer (HTL) interfaces, offering a conformal, transparent, and thermally stable coating compatible with delicate perovskite films. This approach enables interfacial defect passivation and acts as a protective barrier against moisture and UV-induced degradation. Devices incorporating ADA layers exhibit significantly improved stability under harsh conditions, retaining 80 % of their initial efficiency after 4000 min over extended exposure to humidity and continuous illumination. These results demonstrate the potential of multifunctional plasma-polymer coatings for the scalable and robust fabrication of perovskite solar cells with enhanced durability., We thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of ERA.NET" title="http://M-ERA.NET>M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers). M.N, G. O and J.A.A. acknowledge the Ministerio de Ciencia e Innovación of Spain, Agencia Estatal de Investigación (AEI), EU (FEDER) under grants PID2022-140061OB-I00 (DEEPMATSOLAR) and CNS2022-135694 (IMPRESOL) and partial funding through the European Union's Horizon Europe research innovation program under the Platform-Zero project (grant agreement number: 101058459)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidation of Amorphous Porous VOx at Low Temperatures for the Formation of Thermochromic VO2 Films

  • Acosta-Rivera, Hiedra
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Rojas, Teresa Cristina
  • Álvarez, Rafael
  • Martin, Nicolas
  • González-Elipe, Agustín R.
  • Palmero, Alberto
This article belongs to the Special Issue Advances and Innovations in Glancing Angle Deposition and Related Nanostructures., Thermochromic VO2 crystalline domains have been formed in amorphous nanocolumnar VOx films by means of a low-temperature oxidation process. The oxidation of an amorphous film with [O]/[V] below 1.9 favors the formation of VO2, V3O7, and V2O5 crystalline domains in the material for temperatures as low as 260 °C, while values above 1.9 lead to the sole formation of the V2O5 phase. It is found that the absorption of oxygen also causes a relevant film volume expansion that makes pores shrink. Under some specific conditions, low-temperature oxidation causes the near disappearance of the amorphous regions, clearly improving the overall transparency and optimizing the optical and electrical modulation capabilities associated with the presence of crystalline VO2 domains. The best thermochromic performance was found when the original stoichiometry was [O]/[V] = 1.5 and the oxidation temperature was 280 °C. These conditions yield a relatively transparent coating in the visible range that presents an optical modulation in the near-infrared range of nearly 50% and a drop of electrical resistivity of more than two orders of magnitude, with a transition temperature of 50.3 °C. A tentative model based on the volume expansion experienced by the film upon oxidation is proposed, which links the structural/chemical features of the material and the formation of the crystalline domains at such relatively low temperatures., We, the authors, thank the projects PID2020-112620GB-I00, PID2021-123879OB-C21, PID2022-143120OB-I00, and PCI2024-153451, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, Fondos NextGeneration EU, and “Plan de Recuperación, Transformación y Resiliencia”, as well as the intramural project 202560E034, funded by the Spanish National Council of Research. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, which is an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). This research work is funded by the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020–SOUNDofICE). The project leading to this article received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Icing monitoring with thickness shear acoustic waves

  • Moral, Jaime del
  • González del Val, Miguel
  • Rico, Víctor J.
  • Sánchez-Valencia, J. R.
  • Mora, Julio
  • García Gallego, Paloma
  • Carreño, Francisco
  • Winkler, Andreas
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Jacob, Stefan
Icing monitoring and ice detection are critical challenges across many industries where ice formation can severely degrade performance or compromise safety. Conventional ice-sensing approaches, such as those based on surface acoustic waves (SAWs), often suffer from limited selectivity, fast saturation, and slow or energy-consuming recovery. In this work, we propose the use of thickness-shear-mode bulk acoustic waves (TSM-AWs) as a selective and robust alternative for monitoring icing phenomena, ranging from frozen sessile droplets to ice accretion in near-real scenarios within aeronautical envelopes. The sensing platform consists of a LiNbO₃ plate activated through lateral-field-excitation electrodes and driven electronically by a Vector or Scalar Network Analyzer. This system reliably detects both freezing conditions and temperature variations. Tracking the evolution of the magnitude of the reflection coefficient, specifically, the resonance peak and shape and frequency of|S11| minimum, of a strongly shear-dominant mode provides a reliable means to characterize and extract both qualitative and quantitative information about icing processes. Finite-element simulations further elucidate the physical mechanisms governing the ice monitoring capabilities. These results position TSM AW devices as promising candidates for a new generation of simple, light-weight, highly sensitive, and robust acoustic wave icing sensors., The authors thank the projects PID2022-143120OB-I00 and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF (FEDER)" A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia. Project DGP_PIDI_2024_02239 funded by Consejería de Universidad, Investigación e Innovación of Junta de Andalucía and Project 202460E235 funded by CSIC. Project ANGSTROM was selected in the Joint Transnational Call 2023 of M-ERA.NET 3, an EU-funded network of about 49 funding organizations (Horizon 2020 grant agreement No 958174). The authors acknowledge the Wettability Characterization Service from ICMS for providing access to their facilities. The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (H2020-FETOPEN-2018-2019-2020-01 SoundOfIce)., No