Pasar al contenido principal

OPTIMIZACION COMBINADA DEL BINOMIO MATERIAL-DISPOSITIVO PARA ENERGIA SOLAR POR APRENDIZAJE AUTOMATICO

PID2022-140061OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PABLO DE OLAVIDE, DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RIO. Repositorio Institucional Olavide
Publicación Artículo científico (JournalArticle)

Charge Dynamics as Probed by Small Signal-Modulated Photocurrent and Impedance Spectroscopy of Metal Vanadate Semiconductors and Alloys

  • Expósito Gálvez, Juan Carlos
  • Rawat, Abhishek
  • Rajeshwar, Krishnan
  • Oskam, Gerko|||0000-0002-2105-5874
This study presents the combined and complementary use of two techniques, namely, intensity modulated photocurrent spectroscopy (IMPS) and photoelectrochemical impedance spectroscopy (PEIS) for the study of partially or wholly replacing copper with an alkaline earth metal (Mg, Ca) in a metavanadate compound matrix (MV2O6). To this end, the three reference compounds (CuV2O6, CaV2O6, MgV2O) and two alloy compositions (Mg0.1Cu0.9V2O6 and Ca0.1Cu0.9V2O6), obtained from a solution combustion technique, were screen-printed on fluorine-doped tin oxide glass (FTO) substrates. Wavelength discrimination for optical excitation of these semiconductor samples was provided by using high-power LED (front-side) illumination with different wavelengths, UV (λ = 370 nm), blue (λ = 455 nm), green (λ = 535 nm), and red (λ = 670 nm). A nonunity photogeneration yield of mobile charge carriers was seen in a trend reminiscent of previous data on binary oxides or even for other types of ternary copper oxides from other laboratories. The dynamic aspects of charge transfer and carrier recombination are discussed using the combined IMPS-PEIS data along with other optical (e.g., diffuse reflectance spectroscopy) and photoelectrochemical data.
RIO. Repositorio Institucional Olavide
Publicación Artículo científico (JournalArticle)

Improving the Performance of Carbon-Based Perovskite Solar Cells by the Incorporation of a Screen-Printed NiCo2O4 Interlayer

  • García-Peña, Nidia G.
  • Nabil, Mahmoud
  • Pourjafari, Dena
  • Peralta-Domínguez, Diecenia
  • Padrón-Hernández, Wendy Yaznay
  • Franco-Bacca, Adriana P.
  • Ríos-Flores, Araceli
  • Heredia-Cervera, Beatriz Eugenia
  • Escalante, Renan
  • Rodríguez Gattorno, Geonel
  • Acosta, Milenis
  • Pistor, Paul|||0000-0002-9244-915X
  • Anta, Juan|||0000-0002-8002-0313
  • Oskam, Gerko|||0000-0002-2105-5874
Hybrid lead halide perovskite solar cells (PSCs) stand out in terms of their high efficiency, yet the limited stability and process scalability pose challenges to their commercialization. Fully printable carbon-based perovskite solar cells (C-PSCs), consisting of a triple stack of mesoporous titania, zirconia, and carbon layers impregnated with the perovskite material, have been introduced as an attractive architecture; however, they generally exhibit lower efficiency. This study proposes a viable and scalable approach to increase the efficiency of C-PSCs by incorporation of an intermediate layer of mesoporous, nanostructured NiCo2O4 between the zirconia and carbon layers. The devices show an average increase in power conversion efficiency from 7.9 to 11%, with a champion device efficiency of 12.4%, associated with an enhanced average open-circuit voltage (VOC) from 0.869 to 0.962 V. Electrochemical impedance spectroscopy reveals that the high-frequency recombination resistance (RHF) decreases exponentially with VOC with the same slope as for the reference triple-stack system, indicating that the mechanism is unchanged; however, a substantial increase in RHF is observed. These results indicate that the hole extraction efficiency improves upon incorporation of the NiCo2O4 film thus decreasing surface recombination at the nonselective carbon contact. On the other hand, we postulate a possible contribution of the high capacitance of the interlayer, which may result in a shift of the Fermi energy of the carbon electrode and play a role in the hysteresis in the current - voltage curve.
RIO. Repositorio Institucional Olavide
Publicación Artículo científico (JournalArticle)

Interfacial charge carrier dynamics of Bi2Fe4O9 photoanodes: interplay between charge transfer and recombination

  • Expósito Gálvez, Juan Carlos
  • Francisco J. Peón-Díaz
  • Deimer R. Gómez-Mejía
  • Omar Jiménez-Sandoval
  • Oskam, Gerko|||0000-0002-2105-5874
The charge carrier dynamics of Bi2Fe4O9 thin-film photoanodes are investigated using electrochemical impedance spectroscopy (EIS) and intensity-modulated photocurrent spectroscopy (IMPS) as a function of applied potential, light intensity, and charge transfer rate, modulated by adding sulfite as a hole-accepting redox species. The photocurrent strongly depends on sulfite concentration, reflecting a transition from surface recombination limited to charge transfer dominated behavior. EIS indicates that the effective interfacial capacitance includes semiconductor contributions and is comparable in magnitude to the Helmholtz capacitance. IMPS reveals a second characteristic time constant under suppressed recombination at more positive applied potentials and higher sulfite concentration. Numerical IMPS simulations reproduce the evolution from a pronounced 1st quadrant contribution to two distinct loops in the 4th quadrant, showing that the second loop can emerge when charge transfer prevails over recombination and the semiconductor and Helmholtz capacitance values are similar. These results establish a framework for interpreting multiple time constant behavior in photoelectrochemical systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Energy-efficient rapid thermal processing for enhanced photoelectrochemical performance of WO3 photoanodes

  • Expósito-Gálvez, Juan Carlos
  • Contreras, Maxime|||/items/7c54f2f3-591b-4804-ab7e-9db1b65c0831
  • Vattier, Florencia
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Oskam, Gerko
Rapid thermal processing (RTP) has emerged as an effective strategy to tailor defect chemistry in metal oxide photoelectrodes while minimising thermal budget and substrate degradation. Here, we investigate the influence of RTP on the structural and photoelectrochemical properties of mesoporous WO3 photoelectrodes for water oxidation. WO3 photoelectrodes deposited by spray coating onto FTO were treated using RTP in air at 650–900 ºC for 60 s, and the results were benchmarked against samples treated for 3 h at 550 ºC in a conventional furnace. Structural analysis revealed comparable crystallinity, phase purity, and morphology across all treatments, indicating minimal structural changes. The optimised RTP treatment at 850 ºC yields a twofold increase in external quantum efficiency (EQE) at 455 nm, and enhances the photocurrent density to 1.9 mA cm−2 under 1 sun AM 1.5 G illumination, compared with 1.4 mA cm−2 for the furnace-treated sample. Electrochemical impedance spectroscopy (EIS) shows increased effective capacitance (Ceff) and decreased charge-transfer resistance for high-temperature RTP samples (800–900 ºC), consistent with an increased density of shallow donor states that may be associated with subsurface oxygen vacancies. Intensity-modulated photocurrent spectroscopy (IMPS) reveals a correlation between the characteristic frequency (fmin) and steady-state photocurrent, indicating that an increase in vacancy-induced shallow states enhances electron transport through trap-mediated dynamics. Furthermore, RTP lowers energy consumption by around 140-fold relative to conventional annealing. These results highlight RTP as a fast, energy-efficient strategy to enhance photocurrent in WO3 photoelectrodes, providing practical guidelines for the fabrication of high-performance photoanodes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting perovskite solar cell stability: Dual protection with ultrathin plasma polymer passivation layers

  • Nabil, Mahmoud
  • Contreras-Bernal, Lidia
  • Moreno-Martinez, Gloria
  • Obrero-Pérez, José M.
  • Castillo-Seoane, Javier
  • Anta, Juan A.
  • Oskam, Gerko
  • Pistor, Paul
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
Metal halide perovskite solar cells (MHPSCs) hold great promise due to their high efficiency and low fabrication costs, but their long-term stability under environmental conditions remains the main challenge. However, their long-term operational stability under environmental stress remains a critical limitation for commercialization. In this work, we explore a dual passivation strategy using ultrathin adamantane-based plasma polymer (ADA) films, deposited via remote plasma-assisted vacuum deposition (RPAVD), to enhance the environmental stability of MHPSCs. The ADA layers are introduced simultaneously at both the electron transport layer (ETL)/perovskite and perovskite/hole transport layer (HTL) interfaces, offering a conformal, transparent, and thermally stable coating compatible with delicate perovskite films. This approach enables interfacial defect passivation and acts as a protective barrier against moisture and UV-induced degradation. Devices incorporating ADA layers exhibit significantly improved stability under harsh conditions, retaining 80 % of their initial efficiency after 4000 min over extended exposure to humidity and continuous illumination. These results demonstrate the potential of multifunctional plasma-polymer coatings for the scalable and robust fabrication of perovskite solar cells with enhanced durability., We thank the projects PID2022-143120OB-I00, TED2021-130916B-I00, and PCI2024-153451 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, the Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. Project ANGSTROM was selected in the Joint Transnational Call 2023 of ERA.NET" title="http://M-ERA.NET>M-ERA.NET 3, which is an EU-funded network of about 49 funding organisations (Horizon 2020 grant agreement No 958174). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers). M.N, G. O and J.A.A. acknowledge the Ministerio de Ciencia e Innovación of Spain, Agencia Estatal de Investigación (AEI), EU (FEDER) under grants PID2022-140061OB-I00 (DEEPMATSOLAR) and CNS2022-135694 (IMPRESOL) and partial funding through the European Union's Horizon Europe research innovation program under the Platform-Zero project (grant agreement number: 101058459)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Photoelectrochemical Properties of Ti/W-Modified PCN-222 Using Charge-Selective Interfaces

  • Expósito-Gálvez, Juan Carlos
  • Vattier, Florencia
  • Pedrosa, José María
  • Carrillo-Carrión, Carolina
  • Oskam, Gerko
Metal-organic frameworks (MOFs) have attracted growing interest for photoelectrochemical (PEC) applications, including visible-light photocatalysis, CO2 reduction, and hydrogen evolution, owing to their structural tunability and hybrid inorganic-organic nature. The Zr-based porphyrinic framework PCN-222 combines strong visible light absorption from its porphyrin linkers with robust Zr6 clusters that act as structural and electronic backbones. Here, we report a modular strategy to tailor and optimize the PEC behavior of PCN-222 through postsynthetic metal-node substitution with Ti, pore encapsulation of phosphotungstic acid (PTA), and integration with charge-selective interfaces. The resulting PCN-222 materials exhibit photoelectrochemical activity across the entire visible range. Whereas pristine PCN-222(Zr) exhibits photocathodic behavior (photoelectron transfer to the solution and photohole collection at the FTO substrate), partial substitution of Zr with Ti inverts the current to photoanodic. Encapsulation of PTA further enhances the anodic photocurrent due to its electrocatalytic properties. Furthermore, charge-selective TiO2 and NiOx interlayers deposited between the FTO substrate and the MOF films enable selective extraction of photoelectrons or holes, respectively. This strategy results in a significant photocurrent enhancement, which can be attributed to effective competition of charge extraction and recombination. For PCN-222(Zr), the cathodic photocurrent increases by a factor of 7 using a NiOx interlayer, while the current switches to photoanodic upon TiO2 integration, illustrating the importance of efficient charge extraction. Similarly, the current direction is reversed to photocathodic for PCN-222(Zr/Ti) and PCN-222(Zr/Ti/W) when using NiOx. We discuss the interfacial charge extraction, charge transfer and trapping mechanisms in detail, providing strategies for the design of multicomponent MOF-based systems for photoelectrochemical devices., J.C. E-G. and G.O. gratefully acknowledge funding from Consejería de Universidad, Investigación e Innovación of the Junta de Andalucía (Spain) under grant ProyExcel_00543 (H2SOLDIR), the Ministerio de Ciencia e Innovación of Spain, Agencia Estatal de Investigación (AEI) and EU (FEDER) under grant PID2022-140061OB-I00 (DEEPMATSOLAR). C.C.-C. acknowledges financial support from MICIU/AEI/10.13039/501100011033 and FEDER/UE (project PID2022-141034OB-C22). The authors would also like to thank INMALAB (Universidad Pablo de Olavide) for support with characterization and materials analysis.Funding for open access publishing: Universidad Pablo de Olavide/CBUA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information: Tuning the Photoelectrochemical Properties of Ti/W-Modified PCN-222 Using Charge-Selective Interfaces

  • Expósito-Gálvez, Juan Carlos
  • Vattier, Florencia
  • Pedrosa, José María
  • Carrillo-Carrión, Carolina
  • Oskam, Gerko
Contains detailed EDX mapping and DLC results, photographs of the materials dispersions and photoelectrodes, XPS spectra, absorbance and reflectance spectra, Tauc and Kubelka–Munk graphs and analysis, current–potential curves of K4Fe(CN)6 and benzoquinone, and analysis of the time-dependent current–potential curves under illumination, Metal–organic frameworks (MOFs) have attracted growing interest for photoelectrochemical (PEC) applications, including visible-light photocatalysis, CO2 reduction, and hydrogen evolution, owing to their structural tunability and hybrid inorganic–organic nature. The Zr-based porphyrinic framework PCN-222 combines strong visible light absorption from its porphyrin linkers with robust Zr6 clusters that act as structural and electronic backbones. Here, we report a modular strategy to tailor and optimize the PEC behavior of PCN-222 through postsynthetic metal-node substitution with Ti, pore encapsulation of phosphotungstic acid (PTA), and integration with charge-selective interfaces. The resulting PCN-222 materials exhibit photoelectrochemical activity across the entire visible range. Whereas pristine PCN-222(Zr) exhibits photocathodic behavior (photoelectron transfer to the solution and photohole collection at the FTO substrate), partial substitution of Zr with Ti inverts the current to photoanodic. Encapsulation of PTA further enhances the anodic photocurrent due to its electrocatalytic properties. Furthermore, charge-selective TiO2 and NiOx interlayers deposited between the FTO substrate and the MOF films enable selective extraction of photoelectrons or holes, respectively. This strategy results in a significant photocurrent enhancement, which can be attributed to effective competition of charge extraction and recombination. For PCN-222(Zr), the cathodic photocurrent increases by a factor of 7 using a NiOx interlayer, while the current switches to photoanodic upon TiO2 integration, illustrating the importance of efficient charge extraction. Similarly, the current direction is reversed to photocathodic for PCN-222(Zr/Ti) and PCN-222(Zr/Ti/W) when using NiOx. We discuss the interfacial charge extraction, charge transfer and trapping mechanisms in detail, providing strategies for the design of multicomponent MOF-based systems for photoelectrochemical devices., J.C. E-G. and G.O. gratefully acknowledge funding from Consejería de Universidad, Investigación e Innovación of the Junta de Andalucía (Spain) under grant ProyExcel_00543 (H2SOLDIR), the Ministerio de Ciencia e Innovación of Spain, Agencia Estatal de Investigación (AEI) and EU (FEDER) under grant PID2022-140061OB-I00 (DEEPMATSOLAR). C.C.-C. acknowledges financial support from MICIU/AEI/10.13039/501100011033 and FEDER/UE (project PID2022-141034OB-C22). The authors would also like to thank INMALAB (Universidad Pablo de Olavide) for support with characterization and materials analysis.Funding for open access publishing: Universidad Pablo de Olavide/CBUA., Peer reviewed