Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A WO3–CuCrO2 Tandem Photoelectrochemical Cell for Green Hydrogen Production under Simulated Sunlight

  • Díaz-García, Ana Korina
  • Gómez, Roberto
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
The development of photoelectrochemical tandem cells for water splitting with electrodes entirely based on metal oxides is hindered by the scarcity of stable p-type oxides and the poor stability of oxides in strongly alkaline and, particularly, strongly acidic electrolytes. As a novelty in the context of transition metal oxide photoelectrochemistry, a bias-free tandem cell driven by simulated sunlight and based on a CuCrO2 photocathode and a WO3 photoanode, both unprotected and free of co-catalysts, is demonstrated to split water while working with strongly acidic electrolytes. Importantly, the Faradaic efficiency for H2 evolution for the CuCrO2 electrode is found to be about 90%, among the highest for oxide photoelectrodes in the absence of co-catalysts. The tandem cell shows no apparent degradation in short-to-medium-term experiments. The prospects of using a practical cell based on this configuration are discussed, with an emphasis on the importance of modifying the materials for enhancing light absorption.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tailoring the Surface Termination of BiVO4 Photoanodes Using Ammonium Metavanadate Enhances the Solar Water Oxidation Performance

  • Wang, Qingjie
  • Wang, Zeyuan
  • Liao, Nan
  • Montilla-Verdú, Salvador
  • Contreras, Maxime
  • Guijarro, Nestor
  • Luo, Jingshan
  • Contreras, Maxime|||/items/7c54f2f3-591b-4804-ab7e-9db1b65c0831
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
Altering the surface stoichiometry of semiconductor electrodes is known to affect the photoelectrochemical (PEC) response. To date, several reports have hinted at the influence of the surface Bi:V ratio on the solar water oxidation performance of BiVO4 photoanodes, but only a handful of strategies have been reported to afford tuning of such surface stoichiometry, while a comprehensive understanding at an atomic level of the role of the surface termination remains elusive. Herein, we report a new methodology that modulates the surface Bi:V ratio and maximizes the PEC performance toward the oxygen evolution reaction (OER). The presence of ammonium metavanadate drastically reduces the surface recombination while improving the charge separation. Detailed characterization revealed that this treatment filled the native surface vanadium vacancies, which usually act as recombination centers, while inducing a significant increase in the density of oxygen vacancies, which reinforced the built-in electric field that drives the charge separation. Interestingly, coating with NiFeOx improves, especially, the charge separation in surface V-modified BiVO4. Results suggest that the V-modified surface termination altered the surface energetics of BiVO4, leading to an improved band alignment across the interface. Overall, these results provide a new platform to modulate the surface stoichiometry of BiVO4 thin films while shedding new light on the mechanisms by which the surface termination governs the PEC response.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modeling solar-to-hydrogen efficiencies in tandem photoelectrochemical cells with band-edge pinned electrodes

  • Díez García, María Isabel
  • Ortín, Francisco J.
  • Giacoppo, Giosuè
  • Aricò, Antonino Salvatore
  • Gómez, Roberto
  • Díez García, María Isabel|||/items/5b95a809-5530-42c4-9736-4c4dd70b5b80
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Ortín, Francisco J.|||/items/b8c12eef-33fa-4474-8715-7e7312b6ae2c
Tandem photoelectrochemical cells are attracting major attention as devices for green hydrogen generation. However, reaching the thermodynamic limit for solar-to-hydrogen (STH) efficiency seems unrealistic, being thus relevant reporting efficiencies for tandem devices in different achievable scenarios. Here, a straightforward model applicable to both photoelectrodes and based on the Gärtner approach is applied for a tandem device, which enables predicting front and back illumination photocurrent-potential curves for compact semiconductor electrodes. For a tandem cell with the photoanode as the top electrode, calculated STH efficiencies are reported for four representative scenarios based on key photoelectrode properties such as absorption coefficients, doping levels or minority carrier diffusion lengths. As a result, calculated STH efficiencies under realistic conditions reach values in the range of 20-25%. In contrast with published models, the photoanode thickness is also explicitly considered, revealing that relatively efficient tandem cells can be developed, even for electrode materials having similar band gaps.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exploring the potential of transition metal tungstates for photoelectrochemical water oxidation: a combined experimental and computational approach

  • Caravaca Morales, Ana
  • Pastor, Francisco J.
  • Parra Puerto, Andrés
  • Verissimo, Nathalia C.
  • Guijarro, Nestor
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Caravaca Morales, Ana|||/items/766edc8e-3ec3-4a6c-a430-1b504ecd0c4d
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Parra Puerto, Andrés|||/items/ac4740c2-0330-4541-852e-14fb9000b711
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
The combination of experimental and computational methodologies offers a reliable strategy to not only discover new materials but also rationalize their performance and their intrinsic limitations. Following this concept, fourth-period metal tungstates (RWO4, R = Mn, Fe, Co, Ni, Cu or Zn) have been explored for their application as photoanodes for solar water oxidation. The theoretical screening of these materials reveals large effective masses for both electron and hole carriers, while the density of states (DOS) profiles indicate that only Fe and Cu tungstates show adequate features to be photoanodes. This agrees with experimental data showing that they yield the best photocurrents in the series. In fact, FeWO4 reaches over 0.04 mA cm−2 at 1.23 VRHE under one sun, a value 67% higher than the current record. The still low photoactivity is partly linked to the fact that the electrode deviates from the band edge pinning regime over a wide potential range. Under the same conditions, CuWO4 delivers a photocurrent over 0.3 mA cm−2, in line with the best results found in the literature. Overall, the exploratory analysis performed in this paper not only identifies the parameters that limit the photoelectrochemical response of a wide range of metal tungstates, but it enables the identification of iron and copper tungstates as promising photoanodes for solar water oxidation whose performance may be enhanced by the implementation of some modification strategies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Energy-efficient rapid thermal processing for enhanced photoelectrochemical performance of WO3 photoanodes

  • Expósito-Gálvez, Juan Carlos
  • Contreras, Maxime|||/items/7c54f2f3-591b-4804-ab7e-9db1b65c0831
  • Vattier, Florencia
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Oskam, Gerko
Rapid thermal processing (RTP) has emerged as an effective strategy to tailor defect chemistry in metal oxide photoelectrodes while minimising thermal budget and substrate degradation. Here, we investigate the influence of RTP on the structural and photoelectrochemical properties of mesoporous WO3 photoelectrodes for water oxidation. WO3 photoelectrodes deposited by spray coating onto FTO were treated using RTP in air at 650–900 ºC for 60 s, and the results were benchmarked against samples treated for 3 h at 550 ºC in a conventional furnace. Structural analysis revealed comparable crystallinity, phase purity, and morphology across all treatments, indicating minimal structural changes. The optimised RTP treatment at 850 ºC yields a twofold increase in external quantum efficiency (EQE) at 455 nm, and enhances the photocurrent density to 1.9 mA cm−2 under 1 sun AM 1.5 G illumination, compared with 1.4 mA cm−2 for the furnace-treated sample. Electrochemical impedance spectroscopy (EIS) shows increased effective capacitance (Ceff) and decreased charge-transfer resistance for high-temperature RTP samples (800–900 ºC), consistent with an increased density of shallow donor states that may be associated with subsurface oxygen vacancies. Intensity-modulated photocurrent spectroscopy (IMPS) reveals a correlation between the characteristic frequency (fmin) and steady-state photocurrent, indicating that an increase in vacancy-induced shallow states enhances electron transport through trap-mediated dynamics. Furthermore, RTP lowers energy consumption by around 140-fold relative to conventional annealing. These results highlight RTP as a fast, energy-efficient strategy to enhance photocurrent in WO3 photoelectrodes, providing practical guidelines for the fabrication of high-performance photoanodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing Photoelectrochemical Water Oxidation Using Ferromagnetic Materials and Magnetic Fields

  • Wang, Qingjie
  • Oldham, Louise I.
  • Giner Requena, Alfredo
  • Wang, Zeyuan
  • Benetti, Daniele
  • Montilla-Verdú, Salvador
  • Chen, Rong
  • Du, Dongfeng
  • Lana-Villarreal, Teresa
  • Aschauer, Ulrich
  • Guijarro, Nestor
  • Durrant, James Robert
  • Luo, Jingshan
  • Giner Requena, Alfredo|||/items/aaac53d0-b6ed-4b25-87a9-89ebf32e385c
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
Photoelectrochemical (PEC) water splitting provides a promising strategy for H2 production. However, its performance is limited by severe carrier recombination and sluggish water oxidation kinetics. While numerous strategies, namely, elemental doping, morphology engineering, heterojunction formation, and catalyst modification, have been extensively explored to enhance the PEC performance, the application of external magnetic fields (MFs) to affect the catalysis or charge carrier dynamics remains yet to be exploited. Herein, BiVO4 is first selected as a representative photoanode, demonstrating that an ultrathin ferromagnetic coating based on Fe2TiO5, when combined with an external MF, boosts its solar water oxidation performance. The combined analyses of the charge transfer and separation efficiency together with ultraviolet photoelectron spectroscopy and transient absorption spectroscopy data revealed that the MF positively affects the band alignment across the BiVO4/Fe2TiO5 interface, improving the charge separation, while the oxygen evolution at the Fe2TiO5/electrolyte interface was promoted. Finally, we expand this concept to other metal oxide photoanodes, such as TiO2, WO3, and Fe2O3, demonstrating the universality of such an approach. Overall, this work pioneers a novel route to harvest external MFs and improve the PEC response of common nonmagnetic semiconductor photoelectrodes in photoelectrocatalytic conversion.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Magnesium spinel ternary oxides for solar water splitting: Theory and experiments

  • Pastor, Francisco J.
  • Díez García, María Isabel
  • Orts, José M.
  • Gómez, Roberto
  • Díez García, María Isabel|||/items/5b95a809-5530-42c4-9736-4c4dd70b5b80
  • Orts, José M.|||/items/ccc73a25-76fa-4f15-bfd7-33f3ab2771bd
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
A DFT study has been carried out for a series of magnesium spinel oxides (with first row transition metals in the oxidation state +3) to evaluate their potential as solar water splitting photoelectrodes. The calculated electronic structures of these spinels enable estimating the band gap types and values, and the carrier effective masses. The band edge positions have also been evaluated, showing that these ceramic materials may drive both the anodic and the cathodic processes of water splitting, except for MgTi2O4, MgCr2O4, and MgFe2O4, which can only trigger water photooxidation on theoretical grounds. The Mg spinel oxides of Mn, Fe and Co were successfully synthesized as pure phases, and absorbance measurements enabled the determination of the experimental band gaps. The direct band gap values for the Fe (2.4 eV) and Co (2.2 eV) Mg-spinels agree well with the theoretical estimates at the HSE06 level. Linear sweep voltammetry using chopped light has shown that the Fe spinel behaves as a photoanode, and those of Mn and Co as photocathodes. In general vein, this work illustrates how a combination of theoretical screening and experimental benchmarking may contribute to the identification of new materials with prospects of being utilized in artificial photosynthesis.