Pasar al contenido principal

Novel materials for efficient photoelectrochemical energy conversion: from nanoscale engineering to device fabrication

RYC2018-023888-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable Approach to Overcome Polylactide Brittleness with Biobased Esters of Isosorbide and Fatty Acids

  • Mario Nicolás
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Balart, Rafael|||0000-0001-5670-7126
  • Guijarro, Néstor
  • Marset, Xavier
[EN] This work reports on the design and synthesis of sustainable plasticizers from plant-based isosorbide to enhance the intrinsic brittleness of polylactide (PLA). To keep fully biobased carbon, isosorbide was esterified with fatty acids of varying chain length, leading to isosorbide dibutyrate (IDB), dicaprylate (IDC), and dipalmitate (IDP). These esters were incorporated into PLA at different concentrations. An approach to assess PLA-plasticizer miscibility was conducted by calculating solubility parameters (¿) and the Flory¿Huggins interaction parameter, ¿. The effect of plasticizer type and concentration on mechanical, thermal, and thermomechanical properties, as well as on microstructure and biodegradation, was also addressed. The results indicated that IDB and IDC notably enhanced PLA toughness, reducing the PLA¿s glass transition temperature (Tg) from 60.3 to 27.7 °C with 20 wt % IDC. Consequently, strain at break dramatically increased from 12.8% (PLA) to over 300% with 20 wt % IDB or IDC. In contrast, IDP exhibited limited miscibility, resulting in phase separation, though it still improved the impact strength and ductility. All formulations demonstrated exceptional disintegration in compost soil, underscoring their potential as ¿double green¿ plasticizers suitable for PLA. Since both PLA and isosorbide can be industrially derived from starch, this work places starch as a key platform for sustainable polymers., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J.G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J.I.-M. thanks Generalitat Valenciana-GVA for funding a postdoc position through the CIAPOS program cofunded by ESF Investing in your future, grant number CIAPOS/2023/362. X.M. thanks the Spanish Ministerio de Ciencia e Innovacion (PID2021-127332NB). N.G. thanks the Spanish Ministry of Science & Innovation for the "Ramon y Cajal" Program (RYC2018-023888-I), as well as the support received via the projects CNS2023-145354 and PID2021-128805NA-I00. This project has also received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 948829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective lignin conversion via flow photocatalysis for vanillin and bioplasticizers production

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Pastor, Francisco J.
  • Rico, Elio
  • Bertella, Stefania
  • Ortuño, Manuel A.
  • Aschauer, Ulrich
  • Guijarro, Néstor
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Mario Nicolás
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Lignin valorization remains a roadblock in the development of green biorefineries. Currently, depolymerization strategies predominantly depend on energy- and resource-intensive thermochemical methods, while potential applications of the resulting bio-based products are often overlooked. Here, we show a scalable photocatalytic flow reactor for lignin deconstruction that operates at ambient conditions, along with a downstream process that yields commercially viable products at gram scale. An anthraquinone-based photocatalytic platform, when packed in a flow bed reactor, is demonstrated to selectively and nearly quantitatively cleave lignin¿s ß-O-4 moieties, achieving a benchmark yield of 7.1¿wt% for vanillin. The utilization of residual oligomers as plasticizers for biobased polylactic acid resulted in improved mechanical properties and shape memory effects, while maintaining its suitability for conventional 3D printing. This aldehyde-oriented platform represents a key advancement that complements existing ketone-oriented photocatalytic approaches targeting valuable chemicals from lignin conversion, and it ultimately contributes to the holistic utilization of lignin., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. M.M.-P. thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. M.A.O. thanks the Ramon y Cajal Program (RYC2022-035453-I) funded by MICIU/AEI/10.13039/501100011033 and FSE + . C.L.-H. wants to thank CIACIF/2023/244 grant funded by Generalitat Valenciana GVA. U.A thanks the supercomputer resources provided by the Vienna Scientific Cluster (VSC). N.G. thanks the Ramon y Cajal Program (RYC2018-023888-I) funded by MCIN/AEI/ 10.13039/501100011033. The authors also thank the support of the Generalitat Valenciana/FEDER (Spain) through the project IDIFEDER/2020/002. This research is also part of the project PID2021-128805NA-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. This project has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement no. 948829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Naturally occurring eugenyl acetate as biobased plasticizer for sustainable polylactide formulations with improved toughness

  • Barrera-Juca, D.
  • Guijarro, N.
  • Marset, X.
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this study, we explore the potential of eugenyl acetate (EAc), a naturally occurring ester of eugenol, as a biobased plasticizer to overcome the intrinsic brittleness of polylactide (PLA) derived from starch. A theoretical assessment of the miscibility between PLA and EAc is carried out. Our findings demonstrate that EAc shows exceptional miscibility with PLA, as confirmed by their similar solubility parameters (EAc-19.83 MPa1/2, and PLA-20.66 MPa1/2), and an interaction parameter of ¿ = 0.39. The incorporation of EAc improves the ductility of PLA, with strain at break increasing to 427.7 % at 20 wt% EAc, compared to a brittle 10.2 % for neat PLA. The plasticizing effect of EAc also leads to a considerable reduction in the glass transition temperature of PLA, from 60.4 °C to 35.7 °C at 20 wt% EAc. Scanning electron microscopy reveals no phase separation and the development of plastic deformation in PLA formulations with 15¿20 wt% EAc. Additionally, all plasticized formulations exhibit full biodegradation in controlled compost conditions in <8 weeks. These results contribute to advancing PLA-based formulations that are both high-performance and eco-friendly, supporting the broader goals of sustainable development in polymer science., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/ AEI/10.13039/501100011033 and by ESF Investing in your future. C. Lazaro-Hdez wants to thank CIACIF/2023/244 grant funded by Generalitat Valenciana GVA. X. Marset thanks the Spanish Ministerio de Ciencia e Innovacion ¿ (PID2021-127332NB). N. Guijarro thanks the Spanish Ministry of Science & Innovation for the Ramon y Cajal Program (RYC2018-023888-I), as well as the support received via the projects CNS2023-145354 and PID2021-128805NA-I00. This project has also received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 948829). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cyclopalladation of a covalent organic framework for near-infrared-light-driven photocatalytic hydrogen peroxide production

  • Rodríguez-Camargo, Andrés
  • Terban, Maxwell W.
  • Paetsch, Martina
  • Rico Vargas, Elio
  • Graf, Daniel
  • Hirpara, Radhika
  • Duppel, Viola
  • Moudrakovski, Igor
  • Etter, Martin
  • Guijarro, Nestor
  • Ochsenfeld, Christian
  • Dinnebier, Robert E.
  • Yao, Liang
  • Lotsch, Bettina V.
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Rico Vargas, Elio|||/items/e0ee2f23-487d-4722-b959-2a3749d57bd1
Covalent organic frameworks (COFs) have been developed as photosensitizers for photocatalytic energy conversion over the past decade; however, COF photocatalysts have yet to demonstrate the ability to harvest near-infrared light (above 760 nm, approximately 53% of the solar spectrum) for fuel or chemical conversion. In this work we introduce a post-synthetic functionalization strategy for COFs by incorporating a palladacycle directly into the COF backbone, extending the light absorption of an azobenzene-based COF into the near-infrared region. This approach enables homogeneous, atomically distributed palladium functionalization with a high loading of 12 wt% and without noticeable formation of palladium nanoparticles. The cyclopalladated COF, TpAzo-CPd, was used as a catalyst for photocatalytic hydrogen peroxide production under 810 nm illumination. This study demonstrates the use of COFs for near-infrared photocatalysis and opens the door to palladium-single-site COF catalysts for a wide range of chemical transformations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tailoring the Surface Termination of BiVO4 Photoanodes Using Ammonium Metavanadate Enhances the Solar Water Oxidation Performance

  • Wang, Qingjie
  • Wang, Zeyuan
  • Liao, Nan
  • Montilla-Verdú, Salvador
  • Contreras, Maxime
  • Guijarro, Nestor
  • Luo, Jingshan
  • Contreras, Maxime|||/items/7c54f2f3-591b-4804-ab7e-9db1b65c0831
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
Altering the surface stoichiometry of semiconductor electrodes is known to affect the photoelectrochemical (PEC) response. To date, several reports have hinted at the influence of the surface Bi:V ratio on the solar water oxidation performance of BiVO4 photoanodes, but only a handful of strategies have been reported to afford tuning of such surface stoichiometry, while a comprehensive understanding at an atomic level of the role of the surface termination remains elusive. Herein, we report a new methodology that modulates the surface Bi:V ratio and maximizes the PEC performance toward the oxygen evolution reaction (OER). The presence of ammonium metavanadate drastically reduces the surface recombination while improving the charge separation. Detailed characterization revealed that this treatment filled the native surface vanadium vacancies, which usually act as recombination centers, while inducing a significant increase in the density of oxygen vacancies, which reinforced the built-in electric field that drives the charge separation. Interestingly, coating with NiFeOx improves, especially, the charge separation in surface V-modified BiVO4. Results suggest that the V-modified surface termination altered the surface energetics of BiVO4, leading to an improved band alignment across the interface. Overall, these results provide a new platform to modulate the surface stoichiometry of BiVO4 thin films while shedding new light on the mechanisms by which the surface termination governs the PEC response.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Selective lignin conversion via flow photocatalysis for vanillin and bioplasticizers production

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Pastor, Francisco J.
  • Rico Vargas, Elio
  • Gomez-Caturla, Jaume
  • Miranda-Pinzon, Mario
  • Lazaro-Hdez, Carlos
  • Bertella, Stefania
  • Ortuño, Manuel A.
  • Balart, Rafael
  • Aschauer, Ulrich
  • Guijarro, Nestor
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
  • Rico Vargas, Elio|||/items/e0ee2f23-487d-4722-b959-2a3749d57bd1
  • Ortuño, Manuel A.|||/items/8e15fce8-7d2f-408c-83de-bc85da711f44
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
Lignin valorization remains a roadblock in the development of green biorefineries. Currently, depolymerization strategies predominantly depend on energy- and resource-intensive thermochemical methods, while potential applications of the resulting bio-based products are often overlooked. Here, we show a scalable photocatalytic flow reactor for lignin deconstruction that operates at ambient conditions, along with a downstream process that yields commercially viable products at gram scale. An anthraquinone-based photocatalytic platform, when packed in a flow bed reactor, is demonstrated to selectively and nearly quantitatively cleave lignin’s β-O-4 moieties, achieving a benchmark yield of 7.1 wt% for vanillin. The utilization of residual oligomers as plasticizers for biobased polylactic acid resulted in improved mechanical properties and shape memory effects, while maintaining its suitability for conventional 3D printing. This aldehyde-oriented platform represents a key advancement that complements existing ketone-oriented photocatalytic approaches targeting valuable chemicals from lignin conversion, and it ultimately contributes to the holistic utilization of lignin.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Beyond Conventional Organic Electrosynthesis: The Role of Fluorinated Solvents

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Rico Vargas, Elio
  • Guijarro, Nestor
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
  • Rico Vargas, Elio|||/items/e0ee2f23-487d-4722-b959-2a3749d57bd1
Organic electrosynthesis has emerged as a unique platform for chemical manufacturing owing to not only the use of electricity as a green reagent but also, especially, to its distinct reactivity. While conventional solvents are sought to remain inert and solely provide a liquid environment for the electrochemical process to occur, fluorinated alcohol solvents have been shown to redefine this concept. In fact, the singular properties of these solvents allow them to actively interact with the substrates and reaction intermediates driving dramatic changes in the chemo- and regioselectivity as well as on the reaction yields. Given the rapid permeation of these solvents in the burgeoning field of electro-organic synthesis, this mini-review strives to provide a concise but up-to-date critical revision for the growing community of scientists working at the interface of synthetic chemistry and electrochemistry. Here, the main electrosynthetic transformations where they have been exploited besides their key role in activating certain reaction pathways will be highlighted. Finally, a forward-looking perspective on the more practical evolution and implementation of these systems will be discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exploring the potential of transition metal tungstates for photoelectrochemical water oxidation: a combined experimental and computational approach

  • Caravaca Morales, Ana
  • Pastor, Francisco J.
  • Parra Puerto, Andrés
  • Verissimo, Nathalia C.
  • Guijarro, Nestor
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Caravaca Morales, Ana|||/items/766edc8e-3ec3-4a6c-a430-1b504ecd0c4d
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Parra Puerto, Andrés|||/items/ac4740c2-0330-4541-852e-14fb9000b711
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
The combination of experimental and computational methodologies offers a reliable strategy to not only discover new materials but also rationalize their performance and their intrinsic limitations. Following this concept, fourth-period metal tungstates (RWO4, R = Mn, Fe, Co, Ni, Cu or Zn) have been explored for their application as photoanodes for solar water oxidation. The theoretical screening of these materials reveals large effective masses for both electron and hole carriers, while the density of states (DOS) profiles indicate that only Fe and Cu tungstates show adequate features to be photoanodes. This agrees with experimental data showing that they yield the best photocurrents in the series. In fact, FeWO4 reaches over 0.04 mA cm−2 at 1.23 VRHE under one sun, a value 67% higher than the current record. The still low photoactivity is partly linked to the fact that the electrode deviates from the band edge pinning regime over a wide potential range. Under the same conditions, CuWO4 delivers a photocurrent over 0.3 mA cm−2, in line with the best results found in the literature. Overall, the exploratory analysis performed in this paper not only identifies the parameters that limit the photoelectrochemical response of a wide range of metal tungstates, but it enables the identification of iron and copper tungstates as promising photoanodes for solar water oxidation whose performance may be enhanced by the implementation of some modification strategies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Naturally occurring eugenyl acetate as biobased plasticizer for sustainable polylactide formulations with improved toughness

  • Barrera-Juca, D.
  • Lazaro-Hdez, Carlos
  • Gomez-Caturla, Jaume
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
In this study, we explore the potential of eugenyl acetate (EAc), a naturally occurring ester of eugenol, as a biobased plasticizer to overcome the intrinsic brittleness of polylactide (PLA) derived from starch. A theoretical assessment of the miscibility between PLA and EAc is carried out. Our findings demonstrate that EAc shows exceptional miscibility with PLA, as confirmed by their similar solubility parameters (EAc-19.83 MPa1/2, and PLA-20.66 MPa1/2), and an interaction parameter of χ = 0.39. The incorporation of EAc improves the ductility of PLA, with strain at break increasing to 427.7 % at 20 wt% EAc, compared to a brittle 10.2 % for neat PLA. The plasticizing effect of EAc also leads to a considerable reduction in the glass transition temperature of PLA, from 60.4 °C to 35.7 °C at 20 wt% EAc. Scanning electron microscopy reveals no phase separation and the development of plastic deformation in PLA formulations with 15–20 wt% EAc. Additionally, all plasticized formulations exhibit full biodegradation in controlled compost conditions in <8 weeks. These results contribute to advancing PLA-based formulations that are both high-performance and eco-friendly, supporting the broader goals of sustainable development in polymer science.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical Sulfonylation in Deep Eutectic Solvents Enables the Sustainable Synthesis of 2-Quinoline Sulfones

  • Adsuar, Darío
  • Marset, Xavier
  • Ramón, Diego J.
  • Guijarro, Nestor
  • Adsuar, Darío|||/items/17a10d14-ddc7-4d66-8139-5274b6f3a4a2
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
Organic electrosynthesis is gaining momentum, driven by the inherent advantages of using electricity in place of stoichiometric chemical oxidants, such as the improved atom efficacy, the minimization of waste, and the lower cost. However, electrosynthesis methods rely on volatile organic solvents such as acetonitrile to solubilize the reagents, combined with expensive and nonrecyclable electrolytes, which compromise the environmental and economic viability of the approach. Taking the electrosynthesis of 2-arylsulfonylquinolines as representative case, the aforementioned issues by incorporating a deep eutectic solvent that functions simultaneously as the reaction medium and supporting electrolyte are addressed. The method delivers excellent yields, and products are isolated at gram scale via simple water washing and filtration. Interestingly, the eutectic solvent is recovered and reused for up to five cycles without significant loss in reaction yields. In a more general vein, this strategy not only eliminates volatile organic solvents throughout both the reaction and purification stages, but also integrates a recyclable solvent–electrolyte system, there for enabling a fully sustainable electrosynthetic process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient Electrochemical Nitrate Reduction to Ammonia with Copper Supported Rhodium Cluster and Single-Atom Catalysts

  • Liu, Huimin
  • Lang, Xiuyao
  • Zhu, Chao
  • Timoshenko, Janis
  • Rüscher, Martina
  • Bai, Lichen
  • Guijarro, Nestor
  • Yin, Haibo
  • Peng, Yue
  • Li, Junhua
  • Liu, Zheng
  • Wang, Weichao
  • Roldan Cuenya, Beatriz
  • Luo, Jingshan
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
The electrochemical nitrate reduction reaction (NITRR) provides a promising solution for restoring the imbalance in the global nitrogen cycle while enabling a sustainable and decentralized route to source ammonia. Here, we demonstrate a novel electrocatalyst for NITRR consisting of Rh clusters and single-atoms dispersed onto Cu nanowires (NWs), which delivers a partial current density of 162 mA cm−2 for NH3 production and a Faradaic efficiency (FE) of 93% at −0.2 V vs. RHE. The highest ammonia yield rate reached a record value of 1.27 mmol h−1 cm−2. Detailed investigations by electron spin resonance, in-situ infrared spectroscopy, differential electrochemical mass spectrometry and density functional theory modeling suggest that the high activity originates from the synergistic catalytic cooperation between Rh and Cu sites, whereby adsorbed hydrogen on Rh sites transfer to vicinal *NO intermediate species adsorbed on Cu promoting the hydrogenation and ammonia formation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unlocking the Potential of Deep Eutectic Solvents and Ligand-to-Metal Charge Transfer Processes: A Reusable Iron-and-UV-Based System for Sustainable C−C Bond Formation

  • González-Gallardo, Nerea
  • Cores, Alejandro
  • Marset, Xavier
  • Guijarro, Nestor
  • Guillena, Gabriela
  • Ramón, Diego J.
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
  • González-Gallardo, Nerea|||/items/cb9393bb-82cb-4197-b0eb-b0839aa18ee5
  • Cores, Alejandro|||/items/62f4673b-77ed-47ad-be4e-52db8f646be5
Catalytic C−H functionalization has provided new opportunities to access novel organic molecules more sustainably and efficiently. However, these procedures typically rely on precious metals or complex organic catalysts as well as on hazardous solvents or reaction conditions. Herein, a pioneering methodology for direct C−C bond formation enabled by Ligand-to-Metal Charge Transfer (LMCT) and mediated by UV irradiation has been developed using Deep Eutectic Solvents (DESs) as sustainable reaction media. This direct C−H bond functionalization via a radical addition to electrophiles was successfully confirmed over a broad scope of substrates. More importantly, this is the first example of photocatalytic C−C bond formation in DESs. An inexpensive and abundant iron catalyst (FeCl3) was used under air and mild conditions. Different functional groups were well tolerated obtaining promising results that were comparable to those reported in the literature. Additionally, the reaction medium along with the catalyst could be reused for up to 5 consecutive cycles without a significant loss in the reaction outcome. Several green metrics were calculated and compared to those of conventional procedures, revealing the advantages of using DESs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing Photoelectrochemical Water Oxidation Using Ferromagnetic Materials and Magnetic Fields

  • Wang, Qingjie
  • Oldham, Louise I.
  • Giner Requena, Alfredo
  • Wang, Zeyuan
  • Benetti, Daniele
  • Montilla-Verdú, Salvador
  • Chen, Rong
  • Du, Dongfeng
  • Lana-Villarreal, Teresa
  • Aschauer, Ulrich
  • Guijarro, Nestor
  • Durrant, James Robert
  • Luo, Jingshan
  • Giner Requena, Alfredo|||/items/aaac53d0-b6ed-4b25-87a9-89ebf32e385c
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
Photoelectrochemical (PEC) water splitting provides a promising strategy for H2 production. However, its performance is limited by severe carrier recombination and sluggish water oxidation kinetics. While numerous strategies, namely, elemental doping, morphology engineering, heterojunction formation, and catalyst modification, have been extensively explored to enhance the PEC performance, the application of external magnetic fields (MFs) to affect the catalysis or charge carrier dynamics remains yet to be exploited. Herein, BiVO4 is first selected as a representative photoanode, demonstrating that an ultrathin ferromagnetic coating based on Fe2TiO5, when combined with an external MF, boosts its solar water oxidation performance. The combined analyses of the charge transfer and separation efficiency together with ultraviolet photoelectron spectroscopy and transient absorption spectroscopy data revealed that the MF positively affects the band alignment across the BiVO4/Fe2TiO5 interface, improving the charge separation, while the oxygen evolution at the Fe2TiO5/electrolyte interface was promoted. Finally, we expand this concept to other metal oxide photoanodes, such as TiO2, WO3, and Fe2O3, demonstrating the universality of such an approach. Overall, this work pioneers a novel route to harvest external MFs and improve the PEC response of common nonmagnetic semiconductor photoelectrodes in photoelectrocatalytic conversion.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Approach to Overcome Polylactide Brittleness with Biobased Esters of Isosorbide and Fatty Acids

  • Miranda-Pinzon, Mario
  • Gomez-Caturla, Jaume
  • Ivorra-Martinez, Juan
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
This work reports on the design and synthesis of sustainable plasticizers from plant-based isosorbide to enhance the intrinsic brittleness of polylactide (PLA). To keep fully biobased carbon, isosorbide was esterified with fatty acids of varying chain length, leading to isosorbide dibutyrate (IDB), dicaprylate (IDC), and dipalmitate (IDP). These esters were incorporated into PLA at different concentrations. An approach to assess PLA-plasticizer miscibility was conducted by calculating solubility parameters (δ) and the Flory–Huggins interaction parameter, χ. The effect of plasticizer type and concentration on mechanical, thermal, and thermomechanical properties, as well as on microstructure and biodegradation, was also addressed. The results indicated that IDB and IDC notably enhanced PLA toughness, reducing the PLA’s glass transition temperature (Tg) from 60.3 to 27.7 °C with 20 wt % IDC. Consequently, strain at break dramatically increased from 12.8% (PLA) to over 300% with 20 wt % IDB or IDC. In contrast, IDP exhibited limited miscibility, resulting in phase separation, though it still improved the impact strength and ductility. All formulations demonstrated exceptional disintegration in compost soil, underscoring their potential as “double green” plasticizers suitable for PLA. Since both PLA and isosorbide can be industrially derived from starch, this work places starch as a key platform for sustainable polymers.