Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable Approach to Overcome Polylactide Brittleness with Biobased Esters of Isosorbide and Fatty Acids

  • Mario Nicolás
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Balart, Rafael|||0000-0001-5670-7126
  • Guijarro, Néstor
  • Marset, Xavier
[EN] This work reports on the design and synthesis of sustainable plasticizers from plant-based isosorbide to enhance the intrinsic brittleness of polylactide (PLA). To keep fully biobased carbon, isosorbide was esterified with fatty acids of varying chain length, leading to isosorbide dibutyrate (IDB), dicaprylate (IDC), and dipalmitate (IDP). These esters were incorporated into PLA at different concentrations. An approach to assess PLA-plasticizer miscibility was conducted by calculating solubility parameters (¿) and the Flory¿Huggins interaction parameter, ¿. The effect of plasticizer type and concentration on mechanical, thermal, and thermomechanical properties, as well as on microstructure and biodegradation, was also addressed. The results indicated that IDB and IDC notably enhanced PLA toughness, reducing the PLA¿s glass transition temperature (Tg) from 60.3 to 27.7 °C with 20 wt % IDC. Consequently, strain at break dramatically increased from 12.8% (PLA) to over 300% with 20 wt % IDB or IDC. In contrast, IDP exhibited limited miscibility, resulting in phase separation, though it still improved the impact strength and ductility. All formulations demonstrated exceptional disintegration in compost soil, underscoring their potential as ¿double green¿ plasticizers suitable for PLA. Since both PLA and isosorbide can be industrially derived from starch, this work places starch as a key platform for sustainable polymers., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J.G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J.I.-M. thanks Generalitat Valenciana-GVA for funding a postdoc position through the CIAPOS program cofunded by ESF Investing in your future, grant number CIAPOS/2023/362. X.M. thanks the Spanish Ministerio de Ciencia e Innovacion (PID2021-127332NB). N.G. thanks the Spanish Ministry of Science & Innovation for the "Ramon y Cajal" Program (RYC2018-023888-I), as well as the support received via the projects CNS2023-145354 and PID2021-128805NA-I00. This project has also received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 948829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Naturally occurring eugenyl acetate as biobased plasticizer for sustainable polylactide formulations with improved toughness

  • Barrera-Juca, D.
  • Guijarro, N.
  • Marset, X.
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this study, we explore the potential of eugenyl acetate (EAc), a naturally occurring ester of eugenol, as a biobased plasticizer to overcome the intrinsic brittleness of polylactide (PLA) derived from starch. A theoretical assessment of the miscibility between PLA and EAc is carried out. Our findings demonstrate that EAc shows exceptional miscibility with PLA, as confirmed by their similar solubility parameters (EAc-19.83 MPa1/2, and PLA-20.66 MPa1/2), and an interaction parameter of ¿ = 0.39. The incorporation of EAc improves the ductility of PLA, with strain at break increasing to 427.7 % at 20 wt% EAc, compared to a brittle 10.2 % for neat PLA. The plasticizing effect of EAc also leads to a considerable reduction in the glass transition temperature of PLA, from 60.4 °C to 35.7 °C at 20 wt% EAc. Scanning electron microscopy reveals no phase separation and the development of plastic deformation in PLA formulations with 15¿20 wt% EAc. Additionally, all plasticized formulations exhibit full biodegradation in controlled compost conditions in <8 weeks. These results contribute to advancing PLA-based formulations that are both high-performance and eco-friendly, supporting the broader goals of sustainable development in polymer science., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/ AEI/10.13039/501100011033 and by ESF Investing in your future. C. Lazaro-Hdez wants to thank CIACIF/2023/244 grant funded by Generalitat Valenciana GVA. X. Marset thanks the Spanish Ministerio de Ciencia e Innovacion ¿ (PID2021-127332NB). N. Guijarro thanks the Spanish Ministry of Science & Innovation for the Ramon y Cajal Program (RYC2018-023888-I), as well as the support received via the projects CNS2023-145354 and PID2021-128805NA-I00. This project has also received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 948829). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal-Free HFIP-Promoted Synthesis of Benzhydryl Derivatives from Stilbenes as Masked Electrophiles under Oxidative Conditions

  • Sierra-Molero, Francisco J.
  • Baeza, Alejandro
  • Alonso, Diego A.
  • Rico-Trilles, Hernan
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
  • Baeza, Alejandro|||/items/f89ff635-aa48-4f70-8289-3a085e3faa60
  • Sierra-Molero, Francisco J.|||/items/7ff0c51d-d773-4447-988b-1de71fd4a453
Benzhydryl derivatives were synthesized by a new strategy involving the use of stilbenes as an electrophilic reaction partner through umpolung reactivity in a nucleophilic substitution reaction. The transformation, which requires oxidative treatment with mCPBA and the presence of 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) as an essential solvent and reaction promoter, occurs through multiple consecutive steps. Under these conditions, different benzhydryl derivatives were synthesized by coupling stilbenes with a variety of nitrogenated, oxygenated, and sulfur- and carbon-based nucleophiles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable catalytic systems based on imidazole derivatives

  • Martos, Mario
This doctoral thesis describes the development of several catalytic systems containing imidazolium salts. It has been divided into four chapters: Chapter 1 describes a novel low transition temperature mixture (LTTM) based on 1-(methoxycarbonylmethyl)-3-methylimidazolium chloride and urea. The LTTM was characterized and then applied to the oxidation of boron compounds (i.e., boronic acids, boronic esters and trifluoroborates) to the corresponding alcohols, obtaining excellent results in short reaction times. The system, which acts as a co-solvent as well as source of oxidizer, achieved three synthetic cycles with a single imidazolium loading, greatly reducing the environmental impact of the protocol. Chapter 2 compiles our findings about the use of a LTTM based on iron(III) and 1-butyl-3-(methoxycarbonylmethyl)imidazolium chloride as a catalyst for the synthesis of quinazolines. The mixture, named IBIS, presents a bifunctional character as both Lewis acid and redox catalyst, affording the desired products in moderate to excellent yields using air as the terminal oxidant in the absence of solvent. In addition, a methodology for the direct synthesis of 2-arylquinazolines from 2-nitrobenzaldehydes is presented and discussed. Chapter 3 details the study of ionic organic solids (IOS) as metal-free heterogeneous catalysts. The IOS 1,3-bis(carboxymethyl)imidazolium chloride effectively catalyzed the C-3 allylation of indoles, providing a single regioisomer in up to quantitative yields and often, pure after simply filtering off the catalyst. The reaction could be performed in gram scale and the catalyst could be reused up to 5 consecutive times without loss of activity. The protocol was then extended to other π-excessive heterocycles, which experienced selective N-allylation. Overall, this methodology proved to be significantly superior in terms of sustainability than those reported in the literature. This chapter also presents the first synthesis of 1,3-bis(sulfomethyl)imidazole and a comparative study of its catalytic activity against carboxy-based IOS in the synthesis of quinolines as well as the allylation reaction discussed above. Chapter 4 describes the synthesis and characterization of a series of metal-organic frameworks based on 1,3-bis(carboxymethyl)imidazole and zirconium salts using a water-based methodology, as well as the preparation and study of a series of metal-organic gels based on the same components. The project is still ongoing, so only preliminary results are discussed. Sustainability metrics were calculated in all the above-mentioned projects, in order to unbiasedly assess the environmental impact of our synthetic protocols, as well as to compare with previously reported methodologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal–Organic Gels with Zirconium–Imidazolium Frameworks: A Versatile Platform for Eco-Friendly Organic Synthesis

  • Pérez-Almarcha, Yanira
  • Martos, Mario
  • Nacher-Luis, Anna
  • Bosque, Irene
  • Pastor, Isidro M.
  • Bosque, Irene|||/items/f83b9b25-bd7c-48ec-ac0b-6a9a6c1b9fcf
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
  • Pérez-Almarcha, Yanira|||/items/51e61768-fae4-4059-93b0-39f805d26bef
In this work, the synthesis and characterization of a novel zirconium-imidazolium-based metal–organic hydrogel and xerogel (Zr-bcmimCl) are described. The hydrogel was synthesized via a straightforward gelation process using zirconium oxychloride and 1,3-bis(carboxymethyl)-imidazolium chloride (bcmimCl) as precursors, followed by drying to obtain the corresponding xerogel (Zr-bcmimCl). The Zr-based hydrogel displayed moderate conductivity, and the interactions between zirconium species and the ligand may influence its redox properties, as observed by cyclic voltammetry measurements. In addition, the catalytic activity of metal–organic xerogel Zr-bcmimCl was successfully evaluated in the esterification of different carboxylic acids with various alcohols. The xerogel exhibited excellent conversion and selectivity while minimizing waste generation, as confirmed by green metrics. The catalyst also proved effective in transesterification reactions, achieving high yields in the conversion of triglycerides into fatty acid methyl esters, a key step in biodiesel production.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Xanthene–prolinamide-based organocatalyst for asymmetric aldol reactions in green media

  • Benrzeil, Hajar
  • Tazi, Bouchra
  • Lopez de Leon, Juan
  • Alonso, Diego A.
  • Guenoun, Farhate
  • Guillena, Gabriela
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
A novel organocatalyst, 14-(4-(pyrrolidine-2-carboxamido)phenyl)-14H-dibenzo[a,j]xanthene(4-DBX), was synthesized in four steps from commercially available starting materials and subsequently evaluated in asymmetric aldol reactions. Benzaldehyde derivatives and a variety of ketones were employed as aldol partners under environmentally friendly reaction conditions, including water, deep eutectic solvent, and high-speed ball milling. Under optimized reaction conditions, the catalyst (10 mol%) exhibited excellent performance in water, affording aldol products in quantitative yields (99% in 2.6 h), with enantiomeric excesses of up to 99% and diastereomeric ratios reaching 82:18. Overall, this method provides an efficient asymmetric aldol reaction of electron-deficient benzaldehydes in water.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal–Organic Frameworks Based on Copper and Dicarboxy-Functionalized Imidazole Modified With Halides: Enhancement of Catalysis in Organic Synthesis

  • Pérez-Almarcha, Yanira
  • Alonso, Azahara
  • Albert-Soriano, María
  • Martos, Mario
  • Pastor, Isidro M.
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
  • Pérez-Almarcha, Yanira|||/items/51e61768-fae4-4059-93b0-39f805d26bef
New chloride- and bromide-modified metal–organic frameworks (MOFs) based on copper and 1,3-bis (carboxymethyl)imidazole (bcmim) derivatives have been prepared via post–synthetic modification (PSM) or by a direct route, following a simple, effective, and sustainable protocol. These materials have been characterized, and their catalytic activity has been studied. Cu-bcmim-Cl and Cu-bcmim-Br materials have been shown to be more efficient acidic catalytic systems than nonmodified materials. The catalytic activity has been tested as a Lewis acid catalyst in the methanolysis of styrene oxide and in the synthesis of quinolines and acridines, with the recovery and recyclability of the catalysts being possible. Furthermore, the catalytic activity of the catalysts has been tested in the oxidative coupling of formamides and carboxylic acids.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Visible-Light-Mediated Amide Synthesis in Deep Eutectic Solvents

  • Procopio, Debora
  • Marset, Xavier
  • Guillena, Gabriela
  • Di Gioia, Maria Luisa
  • Ramón, Diego J.
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
In the present study, for the first time environmentally friendly deep eutectic solvents (DESs) are used as reaction media to perform an efficient, simple and straightforward photocatalytic amide synthesis at room temperature using thioacids and amines. This method features mild conditions, a broad substrate scope, high yields (≤99%) under ambient conditions with air and moisture tolerance. Moreover, the applied operationally mild reaction conditions tolerate the presence of several different functional group substituents on the amine counterpart. Finally, the developed approach allows the recycling of the reaction medium and catalyst for at least three consecutive cycles without a significant decrease in the reaction yield.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hydrocyanation of Non-Activated Alkenes Without Handling HCN

  • Chinchilla, Rafael
  • Baeza, Alejandro
  • Baeza, Alejandro|||/items/f89ff635-aa48-4f70-8289-3a085e3faa60
  • Chinchilla, Rafael|||/items/b57f8971-6b38-417f-beb6-510f039a3fa5
The hydrocyanation of alkenes can be considered a straightforward methodology that gives access to different functionalized organic chemistry entities. This is due to nitrile's high versatility, which can easily undergo further transformations. However, this process has traditionally employed hazardous hydrogen cyanide as the hydrocyanation agent. Therefore, in the last decades, different protocols have been developed to accomplish this key organic transformation without needing to handle HCN. In this review, we aim to gather the most recent works published in the last couple of decades regarding the hydrocyanation of non-activated olefins in the absence of gaseous hydrogen cyanide as nitrile source. In addition, special attention has been paid to the reaction mechanism working in each case.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Toxicity Assessment and Bioremediation of Deep Eutectic Solvents by Haloferax mediterranei: A Step Toward Sustainable Circular Chemistry

  • Guillena, Gabriela
  • Martínez-Martínez, Guillermo
  • Martínez-Espinosa, Rosa María
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Martínez-Espinosa, Rosa María|||/items/9a202cad-7f8a-4986-b163-354acffab303
Urea is an essential fertilizer produced through the industrial synthesis of ammonia (NH3) via the Haber–Bosch process, which contributes ≈1.2% of global annual CO2 emissions. Electrocatalytic urea synthesis under ambient conditions via C–N coupling from CO2 and nitrogen species such as nitrate (NO3−), nitrite (NO2−), nitric oxide (NO), and nitrogen gas (N2) has gained interest as a more sustainable route. However, challenges remain due to the unclear reaction pathways for urea formation, competing reactions, and the complexity of the resulting product matrix. This review highlights recent advances in catalyst design, urea quantification, and intermediate identification in the C–N coupling reaction for electrocatalytic urea synthesis. Furthermore, this review explores future prospects for industrial C–N coupling, considering potential nitrogen and carbon sources and examining alternative C–N coupling products, such as amides and amines.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Deep Eutectic Solvents as Sustainable Media for Pharmaceutical Purposes

  • Procopio, Debora
This doctoral thesis explores the use of Deep Eutectic Solvents (DESs) as an environmentally friendly alternative to conventional solvents in common organic transformations and formulation processes within the pharmaceutical industry. For this purpose, the thesis has been divided into five distinct chapters: Chapter I details the development of a sustainable approach for the synthesis of amides, using Reactive Deep Eutectic Solvents (RDESs) that serve both as a reaction medium and as reagents. This innovative method aims to eliminate hazardous solvents, allowing efficient product recovery and avoiding the need for additional chromatographic purifications. The sustainability of the developed method was estimated through the assessment and comparison of sustainability metrics on a large scale compared to conventional industrial strategies. Chapter II delineates a pioneering use of a simple and commercially available ruthenium catalyst to carry out the photocatalytic amide synthesis in DES. Even in this case, the environmental impact of the new methodology has been assessed using green metrics. Chapter III presents an eco-sustainable method for the removal of the tert-butyl carbamate (Boc) group, widely used in organic chemistry for the protection of amine functionalities. The N-Boc deprotection procedure was carried out in the absence of organic solvent, using a DES based on choline chloride and p-toluenesulfonic acid, which acts both as a reaction medium and catalyst. This approach was tested for the deprotection of various N-Boc derivatives. Furthermore, the impact of the developed methodology was valuated using green metrics. Chapter IV aims to propose a green, "one-pot" synthesis in two stages of the Active Pharmaceutical Ingredient (API) Atenolol. Currently, Atenolol ranks among the top five best-selling drugs worldwide, belonging to a class of beta-blockers commonly used for treating angina, hypertension, and reducing the risk of mortality after a heart attack. The novel synthetic methodology for Atenolol involves a DES which acts both as reaction medium and catalyst, providing a sustainable and environmentally friendly alternative to conventional industrial synthetic routes. The environmental impact of this synthetic strategy has been assessed using sustainability metrics and compared with traditional procedures. Finally, Chapter V aims to delve into how DESs can be sustainably utilized as alternative solvents in the pharmaceutical sector due to their extraordinary ability to significantly enhance the solubilization and delivery of poorly water-soluble Active Pharmaceutical Ingredients (APIs) belonging to Biopharmaceutics Classification System (BCS) Classes II and IV. This exploration holds potential positive implications for the pharmaceutical, chemical, and other related industries.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Iron-Based Imidazolium Salt as Dual Lewis Acid and Redox Catalyst for the Aerobic Synthesis of Quinazolines

  • Martos, Mario
  • Pastor, Isidro M.
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
A low transition temperature mixture formed with 1-butyl-3-(methoxycarbonylmethyl)imidazolium chloride and iron(III) chloride has proven to be an efficient catalyst for the synthesis of quinazolines following a sequence of condensation-cyclization-oxidation reactions. The protocol is simple and effective for coupling 2-acylanilines and benzylamines to form nitrogen containing heterocycles with moderate to excellent yields (up to 93%), being possible to perform the reaction in preparative scale. The functionalized imidazolium salt is crucial for the activation of the reagents under solvent-free conditions, and the presence of iron in the catalyst mediates the oxidation step with atmospheric oxygen. These features make the presented procedure better, from an environmental point of view, than other processes previously described. For this comparison, different "green" metrics have been used, such as atom economy, stoichiometric factor, reaction mass efficiency, E-factor and EcoScale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis and structural characterization of l-prolinol derived chiral eutectic mixtures as sustainable solvents in asymmetric organocatalysis

  • Ñíguez, José A.
  • Burlingham, Sarah-Jayne
  • Chinchilla, Rafael
  • Pérez, Juana M.
  • Fernández, Ignacio
  • Alonso, Diego A.
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
  • Chinchilla, Rafael|||/items/b57f8971-6b38-417f-beb6-510f039a3fa5
  • Ñíguez, José A.|||/items/521cd08a-b23c-4f0a-adcb-32d5729a11e2
The present study focuses on the synthesis, characterization, and examination of the organocatalytic properties of a series of structurally novel L-Prolinol-based chiral solvents. Different L-Prolinol/TBAB and L-Prolinol/Glycolic acid (GA) mixtures have been characterized and evaluated for their structural characteristics using ATR-FTIR spectroscopy, differential scanning calorimetry (DSC), and NMR techniques including diffusion and NOESY NMR measurements. The structural characteristics of the L-Prolinol-based chiral solvents enabled these novel materials to display organocatalytic activities in the asymmetric conjugate addition of ketones to nitroolefins, showing the chiral liquid L-Prolinol/GA: 1/1 the highest yields and selectivities being similar or superior to those displayed by L-Prolinol in VOC or under neat conditions. Moreover, the new chiral liquid was successfully recovered and reused with minimal loss of performance over several cycles. Regarding the reaction mechanism, it has been detected a rapid formation of the oxazoline intermediate by NMR spectroscopy.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

1-(3,4-Dimethoxyphenyl)-3-(4-methoxyphenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-one

  • Nacher-Luis, Anna
  • Pastor, Isidro M.
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
The study of new catalytic protocols for the synthesis of organic compounds with a more sustainable perspective is of interest. The use of ionic organic solids, such as 1,3-bis(carboxymethyl)imidazolium chloride as a catalyst has allowed the Michael addition of N-heterocycles to chalcones. This methodology has been applied to the unique preparation of the potential bioactive compound 1-(3,4-dimethoxyphenyl)-3-(4-methoxyphenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-one with moderate yield, due to the retro-Michael reaction. Both synthetic reactions (i.e., preparation of chalcone and triazole Michael-addition to chalcone) have good green metrics.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Development of a reversible crosslinking agent for solvent-based polyurethane adhesives via Diels-Alder chemistry

  • Moyano-Vallejo, Alejandra
  • Carbonell Blasco, Pilar
  • Hernández Fernández, Carlota
  • Romero Sánchez, María Dolores
  • Ñíguez, José A.
  • Paredes-Soler, Luis
  • Pastor, Isidro M.
  • Alonso, Diego A.
  • Orgilés-Calpena, Elena
  • Ñíguez, José A.|||/items/521cd08a-b23c-4f0a-adcb-32d5729a11e2
  • Paredes-Soler, Luis|||/items/a7971cf8-448d-496b-985c-6aa9eb55870e
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
Polyurethane (PU) adhesives are widely used due to their excellent mechanical properties and versatility. The development of covalent adaptable networks (CANs) in PU adhesives enables adhesion properties on demand, offering enhanced sustainability and recyclability. Solvent-based PU adhesives are thermoplastic and rely on solvent evaporation for curing; however, incorporating crosslinkers can transform them into thermosets with improved performance. In particular, reversible Diels-Alder (DA) bonds in crosslinkers allow the creation of adaptable CANs. In this study, furfuryl isocyanate (FI) was synthesized as a dienophile for DA reactions with bismaleimide (BMI). Furfuryl amine was reacted with triphosgene to produce FI, which was subsequently reacted with BMI to achieve an 88 % conversion rate to generate a crosslinker functionalized with reversible DA bonds. This crosslinker was combined with a solvent-based thermoplastic PU adhesive. The properties of the resulting crosslinked adhesive were evaluated, including Fourier-transform infrared spectroscopy (FTIR) for curing and chemical composition analysis, and thermogravimetric analysis (TGA) for thermal resistance. The retro-DA reaction was assessed using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Results were compared with those of a commercial crosslinker. The thermal and mechanical properties of the adhesive with reversible crosslinking were slightly lower than those of the adhesive with permanent crosslinking but higher than those of the unmodified thermoplastic adhesive. The DA-based crosslinker imparted reversible properties to the adhesive, paving the way for the development of reversible additives for diverse applications in chemical formulations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photocatalytic Functionalization of Heptacyclo[6.6.0.02,6.03,13.04,11.05,9.010,14]Tetradecane

  • Recort-Fornals, Martí
  • Marset, Xavier
  • Simon, Martin
  • Golz, Christopher
  • Ramón, Diego J.
  • Alcarazo, Manuel
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
The regioselective functionalization of heptacyclo[6.6.0.02,6.03,13.04,11.05,9.010,14]tetradecane (HCTD) under photocatalytic conditions is described. The protocols developed share an initial photo-triggered hydrogen atom abstraction that regioselectively generates the necessary HCTD-radical preferentially at position 1-, they employ no excess of the precious cage carbocycle, and enable the straightforward access to a broad variety of 1-(alkyl, aryl, or sulfinyl) HCTDs in moderate but still synthetically useful yields. The scope and limitations of each transformation are also discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tunable Properties of Non-Volatile Magnetic Mixtures on Different Surfaces

  • Abellán-Martín, Sergio J.
  • Zapater, Cristina
  • González-Gallardo, Nerea
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Ramón, Diego J.
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Zapater, Cristina|||/items/167e0084-0fbb-4747-9758-ade350b2e3e2
  • González-Gallardo, Nerea|||/items/cb9393bb-82cb-4197-b0eb-b0839aa18ee5
In this work, the surface nature-dependent behaviors of magnetic deep eutectic solvents (MDES) and magnetic low-transition-temperature mixtures (MLTTM) are reported for the first time. It has been observed that the surface of material where the MDES or the MLTTM is placed could considerably affect the dispersion and the magnetic and structural properties of these magnetic mixtures. Several experiments have been carried out in order to point out the differences observed in the properties depending on the material on which these magnetic mixtures are placed. As a result, it has been shown that the MDESs or MLTTMs are retained and adhered to glass surfaces, resulting in a loss of magnetism in addition to a loss in the performance of synthesis carried out on the closeness of glass materials as the interaction between the glass and the mixture modify the composition and therefore the properties. As a preliminary result, when using these magnetic mixtures as extractant solvents in dispersive liquid-liquid microextraction, the MDES or MLTTM is retained on the walls of the glass tubes reducing the extraction efficiency, repeatability and the extraction recovery using an external magnetic field. For all these reasons, polypropylene materials should be recommended when handling MDES and MLTTMs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Synthesis of the Active Pharmaceutical Ingredient Atenolol in Deep Eutectic Solvents

  • Procopio, Debora
  • Siciliano, Carlo
  • Perri, Assunta
  • Guillena, Gabriela
  • Ramón, Diego J.
  • Di Gioia, Maria Luisa
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
Atenolol, one of the top five best-selling drugs in the world today used to treat angina and hypertension, and to reduce the risk of death after a heart attack, faces challenges in current synthetic methods to address inefficiencies and environmental concerns. The traditional synthesis of this drug involves a process that generates a large amount of waste and other by-products that need disposal. This study presents a one-pot DES-based sustainable protocol for synthesizing atenolol. The use of the DES allowed the entire process to be conducted with no need for additional bases or catalysts, in short reaction times, under mild conditions, and avoiding chromatographic purification. The overall yield of atenolol was 95%. The scalability of the process to gram-scale production was successfully demonstrated, emphasizing its potential in industrial applications. Finally, the ‘greenness’ evaluation, performed using the First Pass CHEM21 Metrics Toolkit, highlighted the superiority in terms of the atom economy, the reaction mass efficiency, and the overall process mass intensity of the DES-based synthesis compared with the already existing methods.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ionic Organic Solid 1,3-Bis(sulfomethyl)imidazoliumate as an Effective Metal-Free Catalyst for Sustainable Organic Syntheses

  • Martos, Mario
  • Guapacha, Angélica M.
  • Pastor, Isidro M.
  • Guapacha, Angélica M.|||/items/a29796a8-24da-4879-8ef7-95e6cebaa8bb
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
The 1,3-bis(sulfomethyl)imidazole (bsmim) was effectively prepared by a multicomponent reaction, employing aminomethanesulfonic acid, glyoxal, and formaldehyde. The catalytic activity of bsmim was tested in the synthesis of quinoline derivatives, by means of the Friedländer reaction, and in the allylic substitution of alcohols with nitrogen-containing heterocycles. The performance of sulfo-imidazole derivative (bsmim) resulted in higher comparison with the carboxyimidazole analogs (bcmim and bcmimCl), under the same reaction conditions. This type of ionic organic solid allows the promotion of reactions in the absence of solvent and mild reaction conditions, which improves the sustainability of organic synthetic processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Visible light-promoted metal-free aerobic photooxidation of xanthenes, thioxanthenes and dihydroacridines in deep eutectic solvents

  • Burlingham, Sarah-Jayne
  • Torregrosa-Chinillach, Alejandro
  • Alonso, Diego A.
  • Chinchilla, Rafael
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
  • Chinchilla, Rafael|||/items/b57f8971-6b38-417f-beb6-510f039a3fa5
Benzylic systems such as 9H-xanthenes, 9H-thioxanthenes and 9,10-dihydroacridines can be easily oxidized to the corresponding xanthones, thioxanthones or acridones, respectively, in deep eutectic solvents by a visible blue light-promoted photooxidation procedure carried out using ambient air as oxidant in the presence of riboflavin tetraacetate as a metal-free photocatalyst. The obtained yields are high or almost quantitative, and the reaction media can be recovered and reused. The environmental friendliness of the protocol is demonstrated based on several green metrics.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

(E)-2-(1,3-Diphenylallyl)-3,5-dimethoxyphenol

  • Mollà-Guerola, Lara
  • Baeza, Alejandro
  • Baeza, Alejandro|||/items/f89ff635-aa48-4f70-8289-3a085e3faa60
The synthesis of (E)-2-(1,3-diphenylallyl)-3,5-dimethoxyphenol is described by means of the reaction of 3,5-dimethoxyphenol with (E)-1,3-diphenylprop-2-en-1-ol in 1,1,1,3,3,3-hexafluoroispropanol (HFIP), which acts as a solvent and reaction promoter. The reaction proceeds smoothly to afford the mentioned compound in high yield under a metal and additive-free procedure. The corresponding allylated phenol has been fully characterized.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

(S)-(1-Pyrrolidin-2-ylmethyl)quinuclidin-1-ium Bromide

  • Ñíguez, José A.
  • Burlingham, Sarah-Jayne
  • Chinchilla, Rafael
  • Alonso, Diego A.
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
  • Chinchilla, Rafael|||/items/b57f8971-6b38-417f-beb6-510f039a3fa5
  • Ñíguez, José A.|||/items/521cd08a-b23c-4f0a-adcb-32d5729a11e2
(S)-(1-Pyrrolidin-2-ylmethyl)quinuclidine-1-ium bromide was synthesized in a six-step reaction process starting from l-proline and spectroscopically and thermally characterized.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Naturally occurring eugenyl acetate as biobased plasticizer for sustainable polylactide formulations with improved toughness

  • Barrera-Juca, D.
  • Lazaro-Hdez, Carlos
  • Gomez-Caturla, Jaume
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
In this study, we explore the potential of eugenyl acetate (EAc), a naturally occurring ester of eugenol, as a biobased plasticizer to overcome the intrinsic brittleness of polylactide (PLA) derived from starch. A theoretical assessment of the miscibility between PLA and EAc is carried out. Our findings demonstrate that EAc shows exceptional miscibility with PLA, as confirmed by their similar solubility parameters (EAc-19.83 MPa1/2, and PLA-20.66 MPa1/2), and an interaction parameter of χ = 0.39. The incorporation of EAc improves the ductility of PLA, with strain at break increasing to 427.7 % at 20 wt% EAc, compared to a brittle 10.2 % for neat PLA. The plasticizing effect of EAc also leads to a considerable reduction in the glass transition temperature of PLA, from 60.4 °C to 35.7 °C at 20 wt% EAc. Scanning electron microscopy reveals no phase separation and the development of plastic deformation in PLA formulations with 15–20 wt% EAc. Additionally, all plasticized formulations exhibit full biodegradation in controlled compost conditions in <8 weeks. These results contribute to advancing PLA-based formulations that are both high-performance and eco-friendly, supporting the broader goals of sustainable development in polymer science.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Nickel-Imidazolium Low Transition Temperature Mixtures with Lewis-Acidic Character

  • Martos, Mario
  • Pastor, Isidro M.
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
Low transition temperature mixtures (LTTMs) are a new generation of solvents that have found extensive application in organic synthesis. The interactions between the components often generate highly activated, catalytically active species, thus opening the possibility of using LTTMs as catalysts, rather than solvents. In this work, we introduce a nickel-based imidazolium LTTM, study its thermal behavior and explore its catalytic activity in the solvent-free allylation of heterocycles with allylic alcohols. This system is effective in this reaction, affording the corresponding products in excellent yield without the need for additional purifications, thus resulting in a very environmentally friendly protocol.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

1,3-Bis(3-carboxypropyl)-1H-imidazole

  • Martos, Mario
  • Albert-Soriano, María
  • Pastor, Isidro M.
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
The use of γ-aminobutyric acid (GABA) as a starting material in a multicomponent reaction has resulted in the preparation of the zwitterionic 1,3-bis(3-carboxypropyl)imidazole (bcpim). The synthesis of this imidazole derivative in a one-pot procedure with stoichiometric amounts of the corresponding reagents (formaldehyde, glyoxal, and GABA in a 1:1:2 ratio) has resulted in a straightforward and effective methodology, meaning a significant improvement from a sustainable point of view.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical Sulfonylation in Deep Eutectic Solvents Enables the Sustainable Synthesis of 2-Quinoline Sulfones

  • Adsuar, Darío
  • Marset, Xavier
  • Ramón, Diego J.
  • Guijarro, Nestor
  • Adsuar, Darío|||/items/17a10d14-ddc7-4d66-8139-5274b6f3a4a2
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
Organic electrosynthesis is gaining momentum, driven by the inherent advantages of using electricity in place of stoichiometric chemical oxidants, such as the improved atom efficacy, the minimization of waste, and the lower cost. However, electrosynthesis methods rely on volatile organic solvents such as acetonitrile to solubilize the reagents, combined with expensive and nonrecyclable electrolytes, which compromise the environmental and economic viability of the approach. Taking the electrosynthesis of 2-arylsulfonylquinolines as representative case, the aforementioned issues by incorporating a deep eutectic solvent that functions simultaneously as the reaction medium and supporting electrolyte are addressed. The method delivers excellent yields, and products are isolated at gram scale via simple water washing and filtration. Interestingly, the eutectic solvent is recovered and reused for up to five cycles without significant loss in reaction yields. In a more general vein, this strategy not only eliminates volatile organic solvents throughout both the reaction and purification stages, but also integrates a recyclable solvent–electrolyte system, there for enabling a fully sustainable electrosynthetic process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Recent Advances on the Catalytic Asymmetric Allylic α‑Alkylation of Carbonyl Derivatives Using Free Allylic Alcohols

  • Alonso, Diego A.
  • Maciá Ruiz, Beatriz
  • Pastor, Isidro M.
  • Baeza, Alejandro
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
  • Baeza, Alejandro|||/items/f89ff635-aa48-4f70-8289-3a085e3faa60
  • Pastor, Isidro M.|||/items/b53f8c98-d3a2-47a3-99a8-e5b6c7f56cb9
During the last years, the development of more sustainable and straightforward methodologies to minimize the generation of waste organic substances has acquired high importance within synthetic organic chemistry. Therefore, it is not surprising that many efforts are devoted to ameliorating already well-known successful methodologies, that is, the case of the asymmetric allylic allylation reaction of carbonyl compounds. The use of free alcohols as alkylating agents in this transformation represents a step forward in this sense since it minimizes waste production and the substrate manipulation. In this review, we aim to gather the most recent methodologies describing this strategy by paying special attention to the reaction mechanisms, as well as their synthetic applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enantioselective Catalytic Aldol Reactions in the Presence of Knoevenagel Nucleophiles: A Chemoselective Switch Optimized in Deep Eutectic Solvents Using Mechanochemistry

  • Al Beiruty, Hanaa
  • Zhylinska, Sofiia-Stefaniia
  • Kutateladze, Nino
  • Cheong, Hayley Kay Tinn
  • Ñíguez, José A.
  • Burlingham, Sarah-Jayne
  • Marset, Xavier
  • Guillena, Gabriela
  • Chinchilla, Rafael
  • Alonso, Diego A.
  • Nugent, Thomas C.
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
  • Chinchilla, Rafael|||/items/b57f8971-6b38-417f-beb6-510f039a3fa5
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Ñíguez, José A.|||/items/521cd08a-b23c-4f0a-adcb-32d5729a11e2
In the presence of different nucleophilic Knoevenagel competitors, cyclic and acyclic ketones have been shown to undergo highly chemoselective aldol reactions with aldehydes. In doing so, the substrate breadth for this emerging methodology has been significantly broadened. The method is also no longer beholden to proline-based catalyst templates, e.g., commercially available O-t-Bu-L-threonine is advantageous for acyclic ketones. The key insight was to exploit water-based mediums under conventional (in-water) and non-conventional (deep eutectic solvents) conditions. With few exceptions, high aldol-to-Knoevenagel chemoselectivity (>10:1) and good product profiles (yield, dr, and ee) were observed, but only in DESs (deep eutectic solvents) in conjunction with ball milling did short reaction times occur.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unlocking the Potential of Deep Eutectic Solvents and Ligand-to-Metal Charge Transfer Processes: A Reusable Iron-and-UV-Based System for Sustainable C−C Bond Formation

  • González-Gallardo, Nerea
  • Cores, Alejandro
  • Marset, Xavier
  • Guijarro, Nestor
  • Guillena, Gabriela
  • Ramón, Diego J.
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
  • González-Gallardo, Nerea|||/items/cb9393bb-82cb-4197-b0eb-b0839aa18ee5
  • Cores, Alejandro|||/items/62f4673b-77ed-47ad-be4e-52db8f646be5
Catalytic C−H functionalization has provided new opportunities to access novel organic molecules more sustainably and efficiently. However, these procedures typically rely on precious metals or complex organic catalysts as well as on hazardous solvents or reaction conditions. Herein, a pioneering methodology for direct C−C bond formation enabled by Ligand-to-Metal Charge Transfer (LMCT) and mediated by UV irradiation has been developed using Deep Eutectic Solvents (DESs) as sustainable reaction media. This direct C−H bond functionalization via a radical addition to electrophiles was successfully confirmed over a broad scope of substrates. More importantly, this is the first example of photocatalytic C−C bond formation in DESs. An inexpensive and abundant iron catalyst (FeCl3) was used under air and mild conditions. Different functional groups were well tolerated obtaining promising results that were comparable to those reported in the literature. Additionally, the reaction medium along with the catalyst could be reused for up to 5 consecutive cycles without a significant loss in the reaction outcome. Several green metrics were calculated and compared to those of conventional procedures, revealing the advantages of using DESs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Determination of Fe, Cu, and Pb in edible oils using choline chloride:ethylene glycol deep eutectic solvent-based dispersive liquid-liquid microextraction associated with microwave-induced plasma optical emission spectrometry

  • Zapater, Cristina
  • Aguirre Pastor, Miguel Ángel
  • González-Gallardo, Nerea
  • Ramón, Diego J.
  • Vidal, Lorena
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Zapater, Cristina|||/items/167e0084-0fbb-4747-9758-ade350b2e3e2
  • González-Gallardo, Nerea|||/items/cb9393bb-82cb-4197-b0eb-b0839aa18ee5
A new simple, fast and environmentally friendly deep eutectic solvent based dispersive liquid-liquid microextraction (DES-based DLLME) methodology assisted by vortex is presented for the separation and preconcentration of three elements (i.e., Fe, Cu and Pb) from edible oil samples (i.e., soybean, sunflower, rapeseed, sesame, and olive oil) prior to the determination by microwave-induced plasma optical emission spectrometry (MIP-OES). The deep eutectic solvent selected as extractant (i.e., choline chloride and ethylene glycol, 1:2) is synthesized and characterized by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (1H NMR) and differential scanning calorimetry (DSC), and the extraction conditions are optimized by a two steps experimental design. Under the optimum extraction conditions (i.e., diluted sample weight: 8.6 g; DES volume: 100 μL; extraction time: 1 min; centrifugation time and speed: 3 min and 3000 rpm; and dispersion system: vortex) the analytical method presents excellent linearity (i.e., R2 values higher than 0.99) in the range 10–500 μg kg−1, repeatability (i.e., CV values lower than 9.2%), and limits of detection (LOD) values of 3, 2 and 0.7 μg kg−1 for Pb, Fe and Cu, respectively. None of the analytes displayed amounts over the upper limit permitted by law, and recovery values of all analytes evaluated in the different samples using external standard calibration were close to 100%, which excludes significant matrix effects. Finally, AGREEprep metric has been used to evaluate the method greenness (final score of 0.47) and it has been compared successfully with previous publications for the same type of analytes and matrices.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Deep Eutectic Solvent-Type Mixture as a Green Catalyst in the Solvent-Free Cycloaddition of CO2 and Epoxides

  • Martí, Tatiana
  • Marset, Xavier
  • Guillem, Celia
  • Guillena, Gabriela
  • Aparicio, Santiago
  • Ramón, Diego J.
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
A sustainable approach for CO2 valorization through cycloaddition with epoxides is proposed to synthesize cyclic carbonates, recognized as compounds in green chemistry and industrial applications. A novel deep eutectic solvent (DES)-type catalyst, comprising a mixture of tetrabutylammonium iodide and levulinic acid in a 1:1.5 molar ratio, is introduced and thoroughly characterized. This mixture demonstrates efficiency under mild and solvent-free conditions, providing improved selectivity and conversion rates compared to other related catalysts. This catalyst system (1.4 mol%) operates at atmospheric pressure, avoiding the need for high-pressure equipment while enhancing scalability. Furthermore, this procedure is considered an ideal approach from both economic and ecological perspectives, due to its 100% atom economy and reduced environmental impact, offering a promising, metal-free and low-toxicity alternative. Additionally, the DES-type catalytic system can be recycled for at least three consecutive cycles while maintaining significant activity. Quantum chemistry calculations provide mechanistic insights supporting experimental findings. Overall, these findings underscore the potential of DES-based systems to advance CO2 utilization technologies, contributing to circular carbon strategies and sustainable chemical synthesis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Deep Eutectic Solvents as à-la-Carte Medium for Transition-Metal-Catalyzed Organic Processes

  • Marset, Xavier
  • Guillena, Gabriela
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
Our society is facing a tremendous challenge to become more sustainable in every sphere of life. Regarding the chemical industry, one of the most significant issues to be addressed is the use of volatile organic compounds (VOCs) as solvents because they are petrol-derived and most of them are toxic and flammable. Among the possible solutions, deep eutectic solvents (DESs) have emerged as sustainable alternatives to VOCs in organic catalyzed transformations and other fields. The advantages of these new reaction media are not only related to their more benign physical and chemical properties and, for most of them, their renewable sources but also due to the possibility of being recycled after their use, increasing the sustainability of the catalyzed process in which they are involved. However, their use as media in catalytic transformations introduces new challenges regarding the compatibility and activity of known catalysts. Therefore, designed catalysts and “à-la-carte” DESs systems have been developed to overcome this problem, to maximize the reaction outcomes and to allow the recyclability of the catalyst/media system. Over the last decade, the popularity of these solvents has steadily increased, with several examples of efficient metal-catalyzed organic transformations, showing the efficiency of the catalysts/DES system, compared to the related transformations carried out in VOCs. Additionally, due to the inherent properties of the DES, unknown transformations can be carried out using the appropriated catalyst/DES system. All these examples of sustainable catalytic processes are compiled in this review.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Approach to Overcome Polylactide Brittleness with Biobased Esters of Isosorbide and Fatty Acids

  • Miranda-Pinzon, Mario
  • Gomez-Caturla, Jaume
  • Ivorra-Martinez, Juan
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
This work reports on the design and synthesis of sustainable plasticizers from plant-based isosorbide to enhance the intrinsic brittleness of polylactide (PLA). To keep fully biobased carbon, isosorbide was esterified with fatty acids of varying chain length, leading to isosorbide dibutyrate (IDB), dicaprylate (IDC), and dipalmitate (IDP). These esters were incorporated into PLA at different concentrations. An approach to assess PLA-plasticizer miscibility was conducted by calculating solubility parameters (δ) and the Flory–Huggins interaction parameter, χ. The effect of plasticizer type and concentration on mechanical, thermal, and thermomechanical properties, as well as on microstructure and biodegradation, was also addressed. The results indicated that IDB and IDC notably enhanced PLA toughness, reducing the PLA’s glass transition temperature (Tg) from 60.3 to 27.7 °C with 20 wt % IDC. Consequently, strain at break dramatically increased from 12.8% (PLA) to over 300% with 20 wt % IDB or IDC. In contrast, IDP exhibited limited miscibility, resulting in phase separation, though it still improved the impact strength and ductility. All formulations demonstrated exceptional disintegration in compost soil, underscoring their potential as “double green” plasticizers suitable for PLA. Since both PLA and isosorbide can be industrially derived from starch, this work places starch as a key platform for sustainable polymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrophilic aromatic substitution in eutectic-type mixtures: from an old concept to new sustainable horizons

  • Martí, Tatiana
  • Marset, Xavier
  • Guillem, Celia
  • Ramón, Diego J.
  • Guillena, Gabriela
  • Guillena, Gabriela|||/items/cc60bdaf-2c2d-4a78-9538-389c99026973
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
The Friedel-Crafts reaction is present in many fields of chemistry, being especially relevant in industrial applications, where is one of the key methodologies to transform raw materials into functionalized aromatic products. During the last few years, the industry has been compelled to modify conditions applied in their processes due to the demand for more environmentally conscious and secure production techniques. In this review, some alternatives to conventional solvents as the use of deep eutectic solvents (DESs) as new reaction media with compatible catalysts, commonly used in Friedel-Crafts reactions are reported. These new conditions represent a major step towards sustainability in comparison to traditional methods which employ stoichiometric amounts of Lewis acids and organic volatile solvents as reaction media.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable synthesis of sulfonamides via oxidative chlorination in alternative solvents: a general, mild, and eco-friendly strategy

  • Gutiérrez Hernández, Abelardo
  • Sierra-Molero, Francisco J.
  • Baeza, Alejandro
  • Méndez, Francisco
  • Contreras-Celedón, Claudia
  • Alonso, Diego A.
  • Sierra-Molero, Francisco J.|||/items/7ff0c51d-d773-4447-988b-1de71fd4a453
  • Baeza, Alejandro|||/items/f89ff635-aa48-4f70-8289-3a085e3faa60
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
A general, mild, and environmentally friendly method for synthesizing sulfonamides in sustainable solvents was developed. Sodium dichloroisocyanurate dihydrate (NaDCC·2H2O) served as an efficient oxidant for converting thiols to sulfonyl chlorides, which then reacted in situ with various amines to afford sulfonamides in good to excellent yields in water, EtOH, glycerol and the DES ChCl/glycerol: 1/2. The process features simple conditions and a solvent-free workup involving only filtration, highlighting its potential as a green and practical approach to sulfonamide synthesis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Methyl 3,3-Bis[4-(dimethylamino)phenyl]-2,2-dimethylpropanoate

  • Mollà-Guerola, Lara
  • Baeza, Alejandro
  • Baeza, Alejandro|||/items/f89ff635-aa48-4f70-8289-3a085e3faa60
The synthesis of methyl 3,3-bis[4-(dimethylamino)phenyl]-2,2-dimethylpropanoate is achieved by means of the alkylation of methyl isobutyrate silyl enol ether with bis[4-(dimethylamino)phenyl]methanol, facilitated by using 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) as a solvent and reaction promoter. The reaction proceeds smoothly to produce the mentioned compound in a good yield via a metal and additive-free procedure. The corresponding ester is fully characterized.