Pasar al contenido principal

NUEVOS AVANCES EN (MICRO)EXTRACCION ECOLOGICA: DISOLVENTES EUTECTICOS PROFUNDOS MAGNETICOS

PID2021-126155OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of diluted mixtures of an ionic liquid in a hydrophobic natural deep eutectic solvent: Physicochemical, spectroscopic and electrochemical insights for its application in electrochemically controlled micro-extraction of heavy metals

  • Marco, Andrea
  • Aguirre, Miguel Angel
  • Hidalgo, Montserrat
  • Quijada, César|||0000-0002-9965-9651
[EN] In this work, a hydrophobic natural deep eutectic solvent (NADES) was made by mixing up DL-menthol and decanoic acid in a 2:1 molar ratio, and its mixtures with a soluble ionic liquid (1-hexyl-3-methylimidazolium chloride, [HMIM][Cl]) were investigated. A number of physicochemical properties (ionic conductivity, viscosity, and density) were either measured or estimated by the predictive UNIFAC model over a range of temperatures and [HMIM][Cl] compositions. The addition of [HMIM][Cl] enhances ionic conductivity, while keeping high fluidity and low density. However, Walden plots and dissociation degrees suggest that significant ion pairing occurs. The analysis of excess molar volumes and viscosity deviations suggests that the introduction of the IL up to 50 wt% gives rise to liquid structure with reorganization of the NADES hydrogen-bonding network. Such structural perturbation was confirmed by FT-IR measurements. The more diluted NADES + [HMIM][Cl] system showed an electrochemical stability window of about 2.5 V. Additionally, ferrocene/ferrocenium exhibits a quasi-reversible electron transfer with a standard rate of (2.6 ± 0.3)10¿4 cm s¿1 and a diffusion coefficient of (6.16 ± 0.06)·10¿8 cm2 s¿1. To assess the viability of this medium in analytical applications, an electrochemically controlled liquid-liquid microextraction was conducted, employing the NADES+[HMIM][Cl] mixture as the extractant phase. This approach resulted in a notable enhancement (up to 8-fold gain vs the liquid-liquid microextraction in the absence of electric field) in the metal extraction efficiency from aqueous samples, underscoring the potential of the studied medium in both electrochemical and analytical applications., The authors are grateful for the financial support received from the Valencian Regional Government (Spain) (CIPROM/2021/062) and the Spanish Ministry of Science and Innovation PID2021-126155OB-I00). Authors also wish to thank the Spanish Network of Excellence in Sample Preparation (RED2022-134079-T), which was granted by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, which were sponsored by the European Chemical Society s Division of Analytical Chemistry. Funding for open access charges from CRUE-Universitat Politecnica de Valencia is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemically controlled liquid-liquid microextraction: an innovative methodology for heavy metal extraction from tea using non-toxic menthol-based eutectic mixture

  • Marco, Andrea
  • Aguirre, Miguel Ángel
  • Hidalgo, Montserrat
  • Quijada, César|||0000-0002-9965-9651
[EN] Background A growing concern about toxic metal contamination in food has generated a need for efficient, sustainable, and non-toxic sample preparation techniques. Conventional extraction methodologies frequently entail the utilization of hazardous solvents or exhibit a lack of sensitivity. There is an increasing demand for analytical methodologies that are more environmentally friendly and capable of extracting trace metals from complex matrices, such as tea. This study aims to address the need for an efficient and environmentally friendly method for the extraction of metals from tea samples using a combination of electrochemically assisted microextraction and a eutectic mixture as extractant. Results An innovative electrochemically enhanced liquid-liquid microextraction technique has been developed, employing a green eutectic mixture composed of a menthol-based hydrophobic deep eutectic solvent (menthol:decanoic acid, 2:1) and a non-toxic ionic liquid (1-hexyl-3-methylimidazolium chloride) to enhance conductivity. The experimental conditions for the extraction procedure were optimized through the implementation of a design of experiments approach. In the context of optimal conditions (i.e., 10 g sample, 315 ¿L extractant, 5 min extraction, pH 4.66, 1 wt% 8-hydroxyquinoline, 600 rpm shaking and a single ¿0.75 V pulse vs. Ag), the method demonstrated excellent linearity, repeatability, and low limits of detection: 0.2, 0.2, 0.7, 2.8 and 0.5 ¿g kg¿1 for Cd, Cr, Ni, Pb and Zn, respectively. The recovery of real and certified tea samples approached 100 %, with negligible matrix effects. Furthermore, no analytes exceeded the maximum permissible limits established by legislation in the infused samples under study. Significance The proposed method represents a substantial advance in sustainable analytical chemistry, as it facilitates the efficient extraction of metals from tea without the use of toxic solvents. Its performance and environmental compatibility position it as a solid alternative for routine metal analysis in food safety monitoring., The authors are grateful for the financial support received from the Valencia Regional Government (Spain) (CIPROM/2021/062) and the Spanish Ministry of Science and Innovation (PID2021-126155OB-I00) . Authors also wish to thank the Spanish Network of Excellence in Sample Preparation (RED2022-134079-T) , which was granted by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, which were sponsored by the European Chemical Society's Division of Analytical Chemistry.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitive elemental analysis of edible oil samples using a hydrophilic eutectic mixture as green solvent in electrochemically controlled liquid-liquid microextraction

  • Marco, Andrea
  • Pertusa, Borja
  • Aguirre, Miguel Angel
  • Hidalgo, Montserrat
  • Quijada, César|||0000-0002-9965-9651
[EN] Background: Analyzing toxic metals in edible oils is crucial due to the associated health risks and strict regulatory limits. Traditional extraction methods are often time-consuming and require toxic solvents. Additionally, they are sometimes ineffective in complex oil matrices. Therefore, there is a strong demand for sustainable, efficient methodologies for extracting trace metals from oils. This study presents a green, effective approach to metal extraction from various edible oils using electrochemically enhanced microextraction. Results: We present a new, environmentally friendly, electrochemically enhanced liquid-liquid microextraction (EC-LLME) method that uses a choline chloride-based deep eutectic solvent (CC:EG, 1:2) to extract Cd, Cu, Fe, Ni, and Pb from various oil samples. We optimized the extraction parameters using a two-step experimental design. Under the optimal conditions of a 15 g sample, 315 ¿L of extractant, a 10 min extraction time, and a ¿ 0.75 V vs Ag pulse, the method achieved excellent linearity in the range of 5¿500 ¿g kg¿ 1 , high repeatability (CV ¿ 6 %), and low detection limits: 0.16 ¿g kg¿ 1 (Cd and Fe), 0.09 ¿g kg¿ 1 (Cu), 0.4 ¿g kg¿ 1 (Ni), and 1.5 ¿g kg¿ 1 (Pb). No analyte exceeded legal limits in the three samples studied (i.e., refined rapeseed oil, refined sunflower oil, and virgin olive oil), and recoveries in real and certified samples were nearly 100 %, confirming minimal matrix effects. Significance: The EC-LLME method is a novel, sustainable alternative for extracting and quantifying trace metals in edible oils. Its superb analytical capabilities and eco-friendly safety, achieved by steering clear of noxious solvents, make it a suitable option for the identification of trace metals in edible vegetable oil samples., The authors are grateful for the financial support received from the Valencia Regional Government (Spain) (CIPROM/2021/062) and the Spanish Ministry of Science and Innovation (PID2021-126155OB-I00). Authors also wish to thank the Spanish Network of Excellence in Sample Preparation (RED2022-134079-T), which was granted by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, which were sponsored by the European Chemical Society s Division of Analytical Chemistry.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing Trace Metal Extraction from Wastewater: Magnetic Activated Carbon as a High-Performance Sorbent for Inductively Coupled Plasma Optical Emission Spectrometry Analysis

  • Abellán-Martín, Sergio J.
  • Villalgordo-Hernández, David
  • Aguirre Pastor, Miguel Ángel
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
A new fast, sensitive, and environmentally friendly analytical method has been developed for the simultaneous determination of Ba, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn in wastewater samples using inductively coupled plasma optical emission spectroscopy (ICP OES). A preconcentration step using a magnetic dispersive solid-phase extraction (MDSPE) technique with a new magnetic sorbent was performed. The new sorbent material was a carbon containing magnetic cobalt and nitrogen groups. This material was synthetized using controlled pyrolysis of a zeolitic imidazolate framework (i.e., ZIF-67). In order to optimize the experimental parameters that affect the MDSPE procedure, a multivariate optimization strategy, using Plackett–Burman and circumscribed central composite designs (CCD), was used. The method has been evaluated employing optimized experimental conditions (i.e., sample weight, 10 g; sample pH, 7.6; amount of sorbent, 10 mg; dispersive agent, vortex; complexing agent concentration, 0.5%; ionic concentration, 0%; eluent, HCl; eluent concentration, 0.5 M; eluent volume, 300 μL; elution time, 3 min and extraction time, 3 min) using external calibration. Limits of detection (LODs) in a range from 0.073 to 1.3 μg L−1 were obtained, and the repeatability was evaluated at two different levels, resulting in relative standard deviations below 8% for both levels (n = 5). An increase in the sensitivity was observed due to the high enrichment factors (i.e., 3.2 to 13) obtained compared with direct ICP OES analysis. The method was also validated through carrying out recovery studies that employed a real wastewater sample and through the analysis of a certified reference material (ERM®-CA713). The recovery values obtained with the real wastewater were between 94 and 108% and between 90 and 109% for the analysis of ERM®-CA713, showing negligible matrix effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical Sensor for the Determination of Methylthiouracil in Meat Samples

  • Marco, Andrea
  • Canals, Antonio
  • Morallon, Emilia
  • Aguirre Pastor, Miguel Ángel
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Marco, Andrea|||/items/ed30abdd-8076-4a93-a527-2b2d5366f59f
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Two analytical methods based on miniaturized electrochemical sensors, voltammetric and amperometric sensors, have been developed for the determination of 6-methyl-2-thiouracil (MTU) in meat consumption samples (beef liver and foie). A multivariate approach has been considered to optimize the experimental procedure including extraction and electrochemical detection. Under optimal conditions and at a typical working potential of 1.55 V (vs Ag pseudo-reference electrode), response is linear in the range 0 to 20 µg L−1 MTU concentration range. The empirical limit of detection is 0.13 µg L−1, lower than the maximum concentration established by legislation. The electrochemical methods have been used to analyze MTU-spiked meat samples, and recovery values varying between 85 and 95% with coefficients of variation <30%. The analytical methods developed with the miniaturized electrochemical sensors can successfully determine the concentration of MTU in real meat samples with high accuracy, being the results obtained similar to those provided by other methods such as UV-Vis spectrophotometry. Finally, the degree of sustainability of the electrochemical sensors-based developed method has been quantified by means of the Analytical Eco-Scale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Co-based magnetic eutectic mixture for the extraction of trace metals in essential oils used in cosmetic industry prior to analysis by inductively coupled plasma optical emission spectrometry

  • Abellán-Martín, Sergio J.
  • Kaynarova, Lidia
  • Georgieva, Deyana
  • Simitchiev, Kiril
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
Background: Cosmetic products are widely used today and are often associated with a healthy lifestyle. However, their widespread application and the presence of potentially toxic substances have raised increasing concerns regarding their impact on human health. Among these substances, metals are particularly hazardous due to their ability to penetrate the skin and cause adverse health effects, even at very low concentrations. Therefore, the development of novel and reliable methodologies for the determination of trace metals in cosmetics is of great importance for ensuring product safety. Results: A new analytical method based on a magnetic eutectic mixture (MEM) ultrasound-assisted emulsification-micro-extraction (USAEME) followed by inductively coupled plasma optical emission spectrometry (ICP OES) for trace metals in cosmetics has been developed. The extraction procedure was optimized using a multivariate approach. The method was evaluated under optimized extraction conditions (i.e., sample mass, 11 g; MEM volume, 59 μL; extraction time, 3 min and ultrasound as dispersive mode). Limits of detection from 0.05 to 5.4 μg kg-1 were obtained, and the repeatability was evaluated at two different levels (i.e., 75 and 300 μg kg-1), resulting in relative standard deviations below 5 % (n = 5). Enhanced sensitivity was achieved, with enrichment factors ranging from 15 to 67 compared to direct ICP OES analysis. The method applicability was assessed through recovery studies using two real essential oil samples (i.e., Pelargonium graveolens and lavender) used in cosmetic manufacture. The recovery values obtained ranged between 94 and 116% for all the elements. Significance: A novel, rapid, sensitive, and environmentally sustainable method was developed for the simultaneous determination of Al, Cd, Cr, Cu, Mn, Pb, and Zn in essential oil samples using ICP OES. The methodology incorporated a preconcentration step via USAEME employing a new designed Co-based MEM (i.e., cobalt (II) chloride hexahydrated:ethylene glycol, 1:2).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemically controlled liquid-liquid microextraction: an innovative methodology for heavy metal extraction from tea using non-toxic menthol-based eutectic mixture

  • Marco, Andrea
  • Aguirre Pastor, Miguel Ángel
  • Quijada Tomás, César
  • Hidalgo, Montserrat
  • Marco, Andrea|||/items/ed30abdd-8076-4a93-a527-2b2d5366f59f
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Hidalgo, Montserrat|||/items/8c122b2d-4d92-45f3-ad75-e863e4e18750
Background: A growing concern about toxic metal contamination in food has generated a need for efficient, sustainable, and non-toxic sample preparation techniques. Conventional extraction methodologies frequently entail the utilization of hazardous solvents or exhibit a lack of sensitivity. There is an increasing demand for analytical methodologies that are more environmentally friendly and capable of extracting trace metals from complex matrices, such as tea. This study aims to address the need for an efficient and environmentally friendly method for the extraction of metals from tea samples using a combination of electrochemically assisted microextraction and a eutectic mixture as extractant. Results: An innovative electrochemically enhanced liquid-liquid microextraction technique has been developed, employing a green eutectic mixture composed of a menthol-based hydrophobic deep eutectic solvent (menthol:decanoic acid, 2:1) and a non-toxic ionic liquid (1-hexyl-3-methylimidazolium chloride) to enhance conductivity. The experimental conditions for the extraction procedure were optimized through the implementation of a design of experiments approach. In the context of optimal conditions (i.e., 10 g sample, 315 μL extractant, 5 min extraction, pH 4.66, 1 wt% 8-hydroxyquinoline, 600 rpm shaking and a single −0.75 V pulse vs. Ag), the method demonstrated excellent linearity, repeatability, and low limits of detection: 0.2, 0.2, 0.7, 2.8 and 0.5 μg kg−1 for Cd, Cr, Ni, Pb and Zn, respectively. The recovery of real and certified tea samples approached 100 %, with negligible matrix effects. Furthermore, no analytes exceeded the maximum permissible limits established by legislation in the infused samples under study. Significance: The proposed method represents a substantial advance in sustainable analytical chemistry, as it facilitates the efficient extraction of metals from tea without the use of toxic solvents. Its performance and environmental compatibility position it as a solid alternative for routine metal analysis in food safety monitoring.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Natural deep eutectic solvent-based microextraction for mercury speciation in water samples

  • Ripoll-Seguer, Laura
  • Rayos, Javier
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
A new natural deep eutectic solvent (NADES)-based analytical method for mercury speciation in water samples is presented. A NADES (i.e., decanoic acid:DL-menthol in a molar ratio of 1:2) is used as an environmentally friendly extractant for separation and preconcentration using dispersive liquid–liquid microextraction before LC-UV–Vis. Under optimal extraction conditions (i.e., NADES volume, 50 µL; sample pH, 12; volume of the complexing agent, 100 µL; extraction time, 3 min; centrifugation speed, 3000 rpm; and centrifugation time, 3 min), the limit of detection values were 0.9 µg L−1 for the organomercurial species and 3 µg L−1 for Hg2+, which had a slightly higher value. The relative standard deviation (RSD, n = 6) has been evaluated at two concentration levels (25 and 50 µg L−1) obtaining values for all the mercury complexes within the range of 6–12% and 8–12%, respectively. The trueness of the methodology has been evaluated using five real water samples from four different sources (i.e., tap, river, lake, and wastewater). The recovery tests have been performed in triplicate obtaining relative recoveries between 75 and 118%, with RSD (n = 3) between 1 and 19%, for all the mercury complexes in surface water samples. However, wastewater sample showed a significant matrix effect (recoveries ranged between 45 and 110%), probably due to the high amount of organic matter. Finally, the greenness of the method has also been evaluated by the analytical greenness metric for sample preparation (i.e., AGREEprep).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Stimulus-responsive smart solvents and their application in analytical liquid-liquid (micro)extraction techniques

  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Ahmadi, Mazaher
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
Switchable-hydrophilicity solvents are a new type of solvents that could be very promising for liquid-liquid (micro)extraction. Nevertheless, they have been scarcely used in this critical step of chemical analysis. This article presents a comprehensive and critical review of fundamentals, chemical factors and stimulus, that reversibly modify the polarity of these solvents. This unique characteristic allows the reversible transition of the solvent from a hydrophobic to a hydrophilic state, favoring liquid-liquid (micro)extraction. Special attention is paid to new types of stimuli as light and voltage to extend the applicability of these exciting solvents in liquid-liquid (micro)extraction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synergistic combination of natural deep eutectic solvent and chemical vapor generation for trace determination of As, Cd, Hg and Pb in drug samples by inductively coupled plasma optical emission spectrometry

  • Abellán-Martín, Sergio J.
  • Pérez, Jorge
  • Pinheiro, Fernanda C.
  • Nóbrega, Joaquim A.
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Pérez, Jorge|||/items/e306700e-e606-4a9e-844f-b45528fa9b23
A new and environmentally friendly analytical method for simultaneous determination of As, Cd, Hg and Pb in drug samples by inductively coupled plasma optical emission spectrometry (ICP OES) has been developed. In order to increase the sensitivity of the analysis, a multinebulizer has been used for chemical vapor generation (CVG) after a dispersive liquid-liquid microextraction (DLLME) procedure using a natural deep eutectic solvent (NADES) as extractant solvent. The factors affecting analyte extraction and on-line chemical vapor generation have been optimized by multivariate analysis. Under optimized conditions, DLLME-CVG-ICP OES improved limit of quantitation (LOQ) values on average 50-fold higher compared with direct ICP OES analysis and afforded an increase of the sensitivity (i.e., enrichment factor) on average 25-times higher than those obtained with CVG-ICP OES analysis. According to the United States Pharmacopoeia (USP) Chapter 232, it means LOQ values are on average 4.3-times lower than their respective 0.3J values for the target-elements from class 1. Trueness has been evaluated by recovery experiments following USP recommendations for two oral drug samples in solid dosage form (i.e., commercial dosage tablets). In addition, the greenness of the developed method has been evaluated using the AGREEprep metrics, showing an excellent green character since it includes the miniaturization of the sample preparation procedure using a reduced volume (i.e., few microliters) of a non-hazardous extractant solvent for multielemental analysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Applicability of microwave induced plasma optical emission spectrometry for wear metal determination in lubricant oil using a multinebulizer

  • Abellán-Martín, Sergio J.
  • Aguirre Pastor, Miguel Ángel
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
In this work, the determination of different metals (i.e., Al, Cr, Cu, Mn, Ni and V) in engine lubricating oils by microwave plasma atomic emission spectrometry (MP AES) has been revisited. For this purpose, a new multinebulizer in combination with the standard dilution analysis (SDA) calibration methodology has been used. The microwave plasma is very unstable and may even extinguish when organic solvents are directly introduced. This problem can be avoided by the synergetic combination of the SDA calibration and the new multinebulizer since it allows the determination of analytes in complex matrices due to the simultaneous introduction of organic and aqueous solutions, favoring the plasma stabilization. Furthermore, the SDA calibration also corrects the matrix effects associated with complex matrices. For the purpose of comparison, the same study has been performed using conventional calibration methodologies (i.e., external calibration (EC), internal standard calibration (IS) and standard addition calibration (SA)). To compare the analytical performances, the analytical figures of merit (i.e., limit of detection and limit of quantification) and the accuracy (i.e., trueness and precision) of the results have been evaluated. The results obtained show very similar values for the SDA calibration compared to the other calibrations with a much lower consumption of reagents, resources and with a higher easiness of operation. In addition, the total analysis time has also been evaluated, which has emphasized the great advantage of the synergetic association of SDA calibration with the multinebulizer in chemical analysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tunable Properties of Non-Volatile Magnetic Mixtures on Different Surfaces

  • Abellán-Martín, Sergio J.
  • Zapater, Cristina
  • González-Gallardo, Nerea
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Ramón, Diego J.
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Zapater, Cristina|||/items/167e0084-0fbb-4747-9758-ade350b2e3e2
  • González-Gallardo, Nerea|||/items/cb9393bb-82cb-4197-b0eb-b0839aa18ee5
In this work, the surface nature-dependent behaviors of magnetic deep eutectic solvents (MDES) and magnetic low-transition-temperature mixtures (MLTTM) are reported for the first time. It has been observed that the surface of material where the MDES or the MLTTM is placed could considerably affect the dispersion and the magnetic and structural properties of these magnetic mixtures. Several experiments have been carried out in order to point out the differences observed in the properties depending on the material on which these magnetic mixtures are placed. As a result, it has been shown that the MDESs or MLTTMs are retained and adhered to glass surfaces, resulting in a loss of magnetism in addition to a loss in the performance of synthesis carried out on the closeness of glass materials as the interaction between the glass and the mixture modify the composition and therefore the properties. As a preliminary result, when using these magnetic mixtures as extractant solvents in dispersive liquid-liquid microextraction, the MDES or MLTTM is retained on the walls of the glass tubes reducing the extraction efficiency, repeatability and the extraction recovery using an external magnetic field. For all these reasons, polypropylene materials should be recommended when handling MDES and MLTTMs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Recent green approaches in liquid-phase microextraction

  • Aguirre Pastor, Miguel Ángel
  • Arroyo-Manzanares, Natalia
  • Carbonell-Rozas, Laura
  • Grau, José
  • Moreno, Carlos
  • Vidal, Lorena
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
The miniaturization of conventional extraction techniques, particularly microextraction methods, has led to a reduction in the use of hazardous reagents and waste. However, the continued use of toxic solvents and materials, along with time-consuming sample preparation processes, negatively impacts the overall sustainability of these methods. As a result, there is growing interest in exploring greener alternatives. This review highlights the most promising green solvents for liquid-phase microextraction, including (natural) deep eutectic solvents, low-toxicity ionic liquids, surfactants, micellar solvents, and bio-based solvents, emphasizing their applications in innovative sample preparation techniques in the last five years. Particular emphasis is placed on their use in automated and semi-automated systems, in line with the increasing role of automation in Analytical Chemistry. Selected applications have been carefully reviewed and discussed to illustrate key advances in the use of green solvents and automation for extracting a wide range of compounds from various matrices. In addition, future perspectives are outlined to guide further development of liquid-phase microextraction in alignment with current trends in green sample preparation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Disolventes eutécticos: nuevas estrategias como fase extractante y como membrana líquida soportada

  • Zapater, Cristina
  • Rubio, Iván
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Canals, Antonio
  • Zapater, Cristina|||/items/167e0084-0fbb-4747-9758-ade350b2e3e2
  • Rubio, Iván|||/items/772cfa96-2abc-46bb-a27a-eefd47ad6c5d
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
En el presente estudio se ha evaluado la viabilidad analítica de emplear disolventes eutécticos (DES) hidrofóbicos e hidrofílicos en procedimientos de microextracción. Por un lado, el DES hidrofílico compuesto por cloruro de colina (ChCl) y etilenglicol (EG) (ChCl:EG, relación molar 1:2) se utilizó como fase extractante en la técnica de (micro)extracción líquido-líquido dispersiva (DLLME, Dispersive Liquid-Liquid Microextraction) para la extracción de cuatro bisfenoles (i.e., BPA, BPF, BPAP y BPAF) en aceites comestibles, comparando su rendimiento analítico con el de su compuesto puro (EG) y su variante magnética (ChCl:EG:FeCl3·6H2O, relación molar 1:4:1). Por otro lado, se ha utilizado un DES hidrofóbico como membrana líquida soportada (SLM, Supported Liquid Membrane) en la técnica de extracción por electromembrana (EME, Electromembrane Extraction) de diferentes antiinflamatorios para su determinación en muestras de agua y orina. En ambos estudios, la determinación se realizó mediante cromatografía de líquidos acoplada a un detector de diodos en serie (LC-DAD).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sensitive elemental analysis of edible oil samples using a hydrophilic eutectic mixture as green solvent in electrochemically controlled liquid-liquid microextraction

  • Marco, Andrea
  • Pertusa, Borja
  • Aguirre Pastor, Miguel Ángel
  • Quijada Tomás, César
  • Hidalgo, Montserrat
  • Marco, Andrea|||/items/ed30abdd-8076-4a93-a527-2b2d5366f59f
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Hidalgo, Montserrat|||/items/8c122b2d-4d92-45f3-ad75-e863e4e18750
Background: Analyzing toxic metals in edible oils is crucial due to the associated health risks and strict regulatory limits. Traditional extraction methods are often time-consuming and require toxic solvents. Additionally, they are sometimes ineffective in complex oil matrices. Therefore, there is a strong demand for sustainable, efficient methodologies for extracting trace metals from oils. This study presents a green, effective approach to metal extraction from various edible oils using electrochemically enhanced microextraction. Results: We present a new, environmentally friendly, electrochemically enhanced liquid-liquid microextraction (EC-LLME) method that uses a choline chloride-based deep eutectic solvent (CC:EG, 1:2) to extract Cd, Cu, Fe, Ni, and Pb from various oil samples. We optimized the extraction parameters using a two-step experimental design. Under the optimal conditions of a 15 g sample, 315 μL of extractant, a 10 min extraction time, and a -0.75 V vs Ag pulse, the method achieved excellent linearity in the range of 5–500 μg kg-1, high repeatability (CV ≤ 6%), and low detection limits: 0.16 μg·kg-1 (Cd and Fe), 0.09 μg·kg-1 (Cu), 0.4 μg·kg-1 (Ni), and 1.5 μg·kg-1 (Pb). No analyte exceeded legal limits in the three samples studied (i.e., refined rapeseed oil, refined sunflower oil, and virgin olive oil), and recoveries in real and certified samples were nearly 100%, confirming minimal matrix effects. Significance: The EC-LLME method is a novel, sustainable alternative for extracting and quantifying trace metals in edible oils. Its superb analytical capabilities and eco-friendly safety, achieved by steering clear of noxious solvents, make it a suitable option for the identification of trace metals in edible vegetable oil samples.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Wear metals determination in lubricating oils by reversed-phase dispersive liquid-liquid microextraction and microwave induced plasma optical emission spectrometry

  • Sáez, Carmen
  • Stoitsov, Dimitar
  • Aguirre Pastor, Miguel Ángel
  • Kmetov, Veselin Y.
  • Coscollà, Clara
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
A periodic study of the engine oil can allow to anticipate possible breakdowns that the vehicle could have. Due to the complexity of the matrix of this type of samples, a sample treatment prior to analysis is necessary. Analytical chemistry is constantly searching for simpler, more sensitive and environmentally friendly methods. The reverse phase dispersive liquid-liquid microextraction fulfills all the characteristics for the analysis in this type of sample by microwave plasma atomic emission spectrometry (MIP OES). In this work, the extractant solvent used for the microextraction procedure is a diluted acid solution (i.e., 3 M HCl), which is a less-hazardous solvent, in comparison with other solvent used in microextraction procedures. Besides, it is perfectly compatible with MIP OES. The main experimental factors affecting the extraction of Cr, Cu, Mn, Mo, and Ni (i.e., amount of sample, extractant type, acid concentration, extractant volume, extractant time, and centrifugation time and speed) are optimized using a multivariate analysis consisting in two steps: a Plackett-Burman design followed by a circumscribed central composite design. Under optimum conditions (i.e., amount of sample: 5.9 g; extractant volume: 60 µL; extractant type: HCl; acid concentration: 3 M; extraction time: 3 min; centrifugation time: 3 min; centrifugation speed: 2000 rpm), the proposed analytical method is validated and employed to analyze different samples (i.e., used and unused engine oils). Two calibration methods have been evaluated since matrix effects have been observed in the used engine oil sample. These effects have been eliminated using standard addition calibration obtaining RSD and recovery values in the range of 4-12 % and 94-106 % respectively, for samples spiked with 1 µg g-1 of Cr, Cu, Mn, Mo and Ni. Finally, the greenness of this method has been assessed by the Eco-Scale metrics.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Natural deep eutectic solvent-based dispersive liquid-liquid microextraction of pesticides in drinking waters combined with GC-MS/MS detection

  • Hristozova, Аsya
  • Vidal, Lorena
  • Aguirre Pastor, Miguel Ángel
  • Simitchiev, Kiril
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
The current research aims to develop a new analytical method applying a dispersive liquid-liquid microextraction (DLLME) assisted by vortex and using an environmentally friendly extractant for the preconcentration of organochlorine and organophosphorus pesticides followed by gas chromatography-tandem mass spectrometry (GC-MS/MS) analysis. The extractant (i.e., natural deep eutectic solvent (NADES)) is safe, cheap, biodegradable and can be prepared by simply mixing DL-menthol and decanoic acid (molar ratio 2:1). The main experimental factors affecting the extraction of all analytes evaluated (19 organochlorine and organophosphorus pesticides) have been optimised using a multivariate analysis consisting in two steps: a Plackett-Burman design followed by a central composite design (CCD). Seven experimental factors have been evaluated: (i) sample volume; (ii) NADES volume; (iii) sample pH; (iv) extraction time; (v) centrifugation time; (vi) centrifugation speed; and (vii) ionic strength (NaCl %, w v−1). For the significant variables, the optimum values were 10 mL sample and 45 μL NADES. No pH adjustment as well as addition of NaCl were needed. The other variables were set at 3 min extraction time, 5 min centrifugation time and 900×g centrifugation speed, respectively. Under the optimised extraction conditions, the limit of quantification (LOQ) values ranged between 0.2 and 78 ng L−1 for all analysed pesticides. Furthermore, the proposed analytical method has been successfully applied to drinking water (bottled spring water). The recovery study (n = 3) has been evaluated at 0.1, 1.0 and 5.0 μg L−1 spiking levels, obtaining relative recovery values within the range of 70 % and 117 % and RSD values between 1 % and 20 % for all the analytes studied, except for p,p-DDT (56–77 % in high conductivity water samples).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ethylene glycol-based dispersive liquid-liquid microextraction of bisphenols in edible oil samples

  • Zapater, Cristina
  • Vidal, Lorena
  • Aguirre Pastor, Miguel Ángel
  • Canals, Antonio
  • Zapater, Cristina|||/items/167e0084-0fbb-4747-9758-ade350b2e3e2
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
This study compares, for the firt time, the use of three different ethylene glycol-based extractant solvents in dispersive liquid-liquid microextraction (DLLME) for the determination of four bisphenols (i.e., BPF, BPA, BPAP, and BPAF) in edible oils by liquid chromatography-diode array detector (LC-DAD). The extractants studied were: pure ethylene glycol (EG), a deep eutectic solvent or DES (i.e., chlorine chloride (ChCl) and EG, 1:2 M ratio), and a magnetic deep eutectic solvent or MDES (i.e., ChCl, EG and iron chloride hexahydrate (FeCl3·6H2O), 1:4:1 M ratio). Two-step multivariate optimization was performed for EG and DES, while one-step optimization was applied for MDES. The optimal conditions for EG and DES were similar with 50 μL of extractant volume and 1 min of extraction time, except for centrifugation conditions which were 3 min and 370 g-force and 3 min and 832 g-force for EG and DES, respectively. The use of MDES required a higher volume of extractant (i.e., 75 μL) and a longer extraction time (i.e., 4.5 min). The most satisfactory results were achieved using EG, exhibiting adequate linearity (r ≥ 0.990), lower limits of detection (LODs) (i.e., 0.3 μg kg−1), excellent repeatability (RSD ≤3.2 %) for all analytes and non-significant matrix effects in real edible oil samples (i.e., relative recovery values: 71–121 %). Therefore, pure ethylene glycol is the most suitable extractant when compared to ethylene glycol-based eutectic mixtures and their magnetic variant. This finding underscores the necessity for further exploration of the pure constituents of mixtures as potential extractants.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A natural deep eutectic solvent-based liquid-liquid microextraction for the determination of bisphenols in mineral and river water samples

  • Rubio, Iván
  • Rayos, Javier
  • Ortega, Irene
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Canals, Antonio
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Rubio, Iván|||/items/772cfa96-2abc-46bb-a27a-eefd47ad6c5d
This study aims to develop a novel method for the determination of five bisphenols (specifically BPS, BPA, BPAP, BPAF, and BPF) in aqueous samples using a natural deep eutectic solvent (NADES) as extractant phase. The environmentally friendly extractant decanoic acid:DL-menthol (1:2 molar ratio) has been employed for the extraction and preconcentration of BPs using dispersive liquid-liquid microextraction prior to liquid chromatography coupled with a diode array detector. The methodology has been evaluated under optimized extraction conditions, namely NADES volume (50 μL), sample pH (7), extraction time (3 min), centrifugation speed (370 g-force) and centrifugation time (1 min), resulting in good linearity with correlation coefficients between 0.993 and 0.999. The relative standard deviation was found to range from 4 to 19 %, while the detection limits were established between 1.5 and 3.3 μg/L. In the course of evaluating the recovery on different water samples, including mineral water, river water, and water from an organization engaged in the direct supply of packaged drinking water to end consumers, the relative recovery values ranged between 70 and 119 %. Additionally, a migration study was conducted utilizing polycarbonate bottles. Finally, an evaluation of the method environmental impact was performed with AGREEprep metric, providing the highest value compared to previous methodologies for the same purpose.