Pasar al contenido principal

RED NACIONAL PARA LA SOSTENIBILIDAD EN LA PREPARACION DE MUESTRA

RED2022-134079-T

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CORDOBA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of diluted mixtures of an ionic liquid in a hydrophobic natural deep eutectic solvent: Physicochemical, spectroscopic and electrochemical insights for its application in electrochemically controlled micro-extraction of heavy metals

  • Marco, Andrea
  • Aguirre, Miguel Angel
  • Hidalgo, Montserrat
  • Quijada, César|||0000-0002-9965-9651
[EN] In this work, a hydrophobic natural deep eutectic solvent (NADES) was made by mixing up DL-menthol and decanoic acid in a 2:1 molar ratio, and its mixtures with a soluble ionic liquid (1-hexyl-3-methylimidazolium chloride, [HMIM][Cl]) were investigated. A number of physicochemical properties (ionic conductivity, viscosity, and density) were either measured or estimated by the predictive UNIFAC model over a range of temperatures and [HMIM][Cl] compositions. The addition of [HMIM][Cl] enhances ionic conductivity, while keeping high fluidity and low density. However, Walden plots and dissociation degrees suggest that significant ion pairing occurs. The analysis of excess molar volumes and viscosity deviations suggests that the introduction of the IL up to 50 wt% gives rise to liquid structure with reorganization of the NADES hydrogen-bonding network. Such structural perturbation was confirmed by FT-IR measurements. The more diluted NADES + [HMIM][Cl] system showed an electrochemical stability window of about 2.5 V. Additionally, ferrocene/ferrocenium exhibits a quasi-reversible electron transfer with a standard rate of (2.6 ± 0.3)10¿4 cm s¿1 and a diffusion coefficient of (6.16 ± 0.06)·10¿8 cm2 s¿1. To assess the viability of this medium in analytical applications, an electrochemically controlled liquid-liquid microextraction was conducted, employing the NADES+[HMIM][Cl] mixture as the extractant phase. This approach resulted in a notable enhancement (up to 8-fold gain vs the liquid-liquid microextraction in the absence of electric field) in the metal extraction efficiency from aqueous samples, underscoring the potential of the studied medium in both electrochemical and analytical applications., The authors are grateful for the financial support received from the Valencian Regional Government (Spain) (CIPROM/2021/062) and the Spanish Ministry of Science and Innovation PID2021-126155OB-I00). Authors also wish to thank the Spanish Network of Excellence in Sample Preparation (RED2022-134079-T), which was granted by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, which were sponsored by the European Chemical Society s Division of Analytical Chemistry. Funding for open access charges from CRUE-Universitat Politecnica de Valencia is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In-house metal-organic framework material for stir-bar sorptive extraction of acidic pharmaceutical compounds from environmental water samples

  • Trullàs, Abril
  • Martínez-Pérez-Cejuela, Héctor
  • Borrull, Francesc
  • Herrero Martínez, José Manuel
  • Marcé, Rosa Maria
  • Fontanals, Núria
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
[EN] Pharmaceutical residues are emerging contaminants in aquatic environments due to widespread use, improper disposal and incomplete removal in wastewater treatment plants. Although usually present at trace levels, they can pose ecological risks because of their bioaccumulation potential and biological activity. This study develops and evaluates a low-cost in-house hybrid coating for stir-bar sorptive extraction (SBSE) designed to improve the recovery of polar acidic pharmaceuticals. The coating is based on an amine-functionalized metal-organic framework providing weak anion exchange interactions, attached to a glycidyl methacrylate monolith (GMA@NH2-UiO-66(Zr)), with an estimated cost below 5 EUR per unit. The method was optimized and coupled to liquid chromatography tandem mass spectrometry (LC-MS/MS) for analysis of environmental waters. In river water, the approach achieved limits of detection around 2 ng/L, recoveries of 22 to 41 percent, matrix effects between plus 9 and minus 2 percent, and precision with relative standard deviation below 25 percent. After validation, the method was applied to real samples, detecting acidic pharmaceuticals at ng/L levels. The new SBSE material showed improved retention of polar compounds, good mechanical stability, and reproducibility, supporting its use for routine monitoring of pharmaceutical contaminants in environmental waters., These results are part of the project PID2023-148939NB-I00, PID2021-125459OB-I00, and grant RED2022-134079-T funded by MICIU/AEI/10.13039/501100011033 and "ERDF/EU". They were possible thanks to the support of the Joan Oro predoctoral grant program from the Department of Research and Universities of the Government of Catalonia and co-financing by the European Social Fund Plus (2024FISDU00309).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemically controlled liquid-liquid microextraction: an innovative methodology for heavy metal extraction from tea using non-toxic menthol-based eutectic mixture

  • Marco, Andrea
  • Aguirre, Miguel Ángel
  • Hidalgo, Montserrat
  • Quijada, César|||0000-0002-9965-9651
[EN] Background A growing concern about toxic metal contamination in food has generated a need for efficient, sustainable, and non-toxic sample preparation techniques. Conventional extraction methodologies frequently entail the utilization of hazardous solvents or exhibit a lack of sensitivity. There is an increasing demand for analytical methodologies that are more environmentally friendly and capable of extracting trace metals from complex matrices, such as tea. This study aims to address the need for an efficient and environmentally friendly method for the extraction of metals from tea samples using a combination of electrochemically assisted microextraction and a eutectic mixture as extractant. Results An innovative electrochemically enhanced liquid-liquid microextraction technique has been developed, employing a green eutectic mixture composed of a menthol-based hydrophobic deep eutectic solvent (menthol:decanoic acid, 2:1) and a non-toxic ionic liquid (1-hexyl-3-methylimidazolium chloride) to enhance conductivity. The experimental conditions for the extraction procedure were optimized through the implementation of a design of experiments approach. In the context of optimal conditions (i.e., 10 g sample, 315 ¿L extractant, 5 min extraction, pH 4.66, 1 wt% 8-hydroxyquinoline, 600 rpm shaking and a single ¿0.75 V pulse vs. Ag), the method demonstrated excellent linearity, repeatability, and low limits of detection: 0.2, 0.2, 0.7, 2.8 and 0.5 ¿g kg¿1 for Cd, Cr, Ni, Pb and Zn, respectively. The recovery of real and certified tea samples approached 100 %, with negligible matrix effects. Furthermore, no analytes exceeded the maximum permissible limits established by legislation in the infused samples under study. Significance The proposed method represents a substantial advance in sustainable analytical chemistry, as it facilitates the efficient extraction of metals from tea without the use of toxic solvents. Its performance and environmental compatibility position it as a solid alternative for routine metal analysis in food safety monitoring., The authors are grateful for the financial support received from the Valencia Regional Government (Spain) (CIPROM/2021/062) and the Spanish Ministry of Science and Innovation (PID2021-126155OB-I00) . Authors also wish to thank the Spanish Network of Excellence in Sample Preparation (RED2022-134079-T) , which was granted by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, which were sponsored by the European Chemical Society's Division of Analytical Chemistry.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitive elemental analysis of edible oil samples using a hydrophilic eutectic mixture as green solvent in electrochemically controlled liquid-liquid microextraction

  • Marco, Andrea
  • Pertusa, Borja
  • Aguirre, Miguel Angel
  • Hidalgo, Montserrat
  • Quijada, César|||0000-0002-9965-9651
[EN] Background: Analyzing toxic metals in edible oils is crucial due to the associated health risks and strict regulatory limits. Traditional extraction methods are often time-consuming and require toxic solvents. Additionally, they are sometimes ineffective in complex oil matrices. Therefore, there is a strong demand for sustainable, efficient methodologies for extracting trace metals from oils. This study presents a green, effective approach to metal extraction from various edible oils using electrochemically enhanced microextraction. Results: We present a new, environmentally friendly, electrochemically enhanced liquid-liquid microextraction (EC-LLME) method that uses a choline chloride-based deep eutectic solvent (CC:EG, 1:2) to extract Cd, Cu, Fe, Ni, and Pb from various oil samples. We optimized the extraction parameters using a two-step experimental design. Under the optimal conditions of a 15 g sample, 315 ¿L of extractant, a 10 min extraction time, and a ¿ 0.75 V vs Ag pulse, the method achieved excellent linearity in the range of 5¿500 ¿g kg¿ 1 , high repeatability (CV ¿ 6 %), and low detection limits: 0.16 ¿g kg¿ 1 (Cd and Fe), 0.09 ¿g kg¿ 1 (Cu), 0.4 ¿g kg¿ 1 (Ni), and 1.5 ¿g kg¿ 1 (Pb). No analyte exceeded legal limits in the three samples studied (i.e., refined rapeseed oil, refined sunflower oil, and virgin olive oil), and recoveries in real and certified samples were nearly 100 %, confirming minimal matrix effects. Significance: The EC-LLME method is a novel, sustainable alternative for extracting and quantifying trace metals in edible oils. Its superb analytical capabilities and eco-friendly safety, achieved by steering clear of noxious solvents, make it a suitable option for the identification of trace metals in edible vegetable oil samples., The authors are grateful for the financial support received from the Valencia Regional Government (Spain) (CIPROM/2021/062) and the Spanish Ministry of Science and Innovation (PID2021-126155OB-I00). Authors also wish to thank the Spanish Network of Excellence in Sample Preparation (RED2022-134079-T), which was granted by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, which were sponsored by the European Chemical Society s Division of Analytical Chemistry.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Electromembrane Extraction in Suspect Screening of Polar Organic Xenobiotics and their Metabolites in Human Urine: A New Approach to Enhance Compound Annotation?

  • Musatadi, Mikel
  • Sahragard, Ali
  • Anakabe, Eneritz
  • Etxebarria, Nestor
  • Olivares, Maitane
  • Zuloaga, Olatz
  • Miró, Manuel
[eng] Suspect and nontarget screening (SNTS) methodologies using human urine are invaluable strategies for understanding the human exposome. However, very polar organic compounds are often overlooked in those methods due to challenges in sample preparation and chromatographic analysis. Although “dilute-and-shoot” (DS) followed by mixed-mode liquid chromatography–high-resolution mass spectrometry (MMLC-HRMS) might be deemed suitable, complementary strategies are needed to enhance SNTS and expand compound identification. In this context, the potential of nonsupported microelectromembrane extraction (μ-EME) is thoroughly studied as a supplement to DS-MMLC-HRMS. It was demonstrated that μ-EME-MMLC-HRMS enables the refinement of suspect screening results from a 24 h pooled human urine sample. The selective extraction capability of μ-EME for charged analytes, compared to DS, allowed the identification of 24 false positives and 4 false negatives. The confidence level of 6 suspects was also enhanced through μ-EME interpretation. Moreover, nine suspects were identified exclusively in μ-EME experiments due to the urine cleanup provided by that technique. Notably, suspects containing carboxylic acid groups (phase II metabolites) and amines were particularly well-annotated by μ-EME employing selective extraction conditions for acids and bases, respectively. Thus, μ-EME proves to be a confirmatory dimension in MMLC-based SNTS approaches.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Suspect screening boosts bioaccessibility assays of phenolic compounds in food commodities: A proof of concept

  • Alonso-Salces, Rosa María
  • Ayala Cabrera, Juan Francisco
  • Miró, Manuel
  • Musatadi, Mikel
  • Olivares, Maitane
  • Prieto, Ailette
  • Sahragard, Ali
  • Zuloaga, Olatz
[eng] The knowledge of the actual oral bioaccessibility of phenolic compounds through food intake in the human gut is a key factor for assessing their potential health benefits. To this end, there is a quest to develop advanced analytical methodologies that are able to expand the chemical space offered by targeted methods. In fact, suspect screening workflows using high-resolution mass spectrometry might shed light on the vast diversity of phenolic compounds in food commodities that might be released in the gut fluids. Herein, targeted and suspect screening assays of phenolic substances in gastric extracts were performed to investigate the relative bioaccessibility of these compounds in the crushed solid fruit as compared to the fruit juice intake. The analytical method was validated for 30 phenolic compounds using a targeted workflow in both positive and negative modes, with dynamic linear ranges spanning from 1.0 to 4000 ng/mL and repeatability values ranging from 0.3 to 13.6% under matrix-matched calibration. Validation was performed in a pH-adjusted gastric extract, with the negative mode offering the most sensitive detection for subsequent real sample analysis. Thereafter, suspect screening workflows of the phenolic compounds and their plant metabolites were conducted in juiced and crushed fruits after the gastric extraction process. The workflow resulted in the confirmation of 8 features with pure standards (level 1), and 24 additional tentative annotations in levels 2–4. The results demonstrated that 59.4% of phenolic compounds annotated in the gastric extracts have higher relative acid bioaccessibility from the solid fruit, 34.4% higher from the juiced samples, and 6.2% equally distributed. Additionally, the targeted and suspect results indicated that there was a significant correlation between the number of phenolic hydroxyls on the relative bioaccessibility of the compounds. However, the relevance of the type of phenolic compounds, e.g., being flavonoid or non-flavonoid, was not statistically significant. This study aims to provide a holistic perspective on how the form of food intake (juice versus whole fruit) can be strategically selected according to specific phenolic compounds to achieve bespoke nutritional and food industry benefits.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Occurrence of twelve UV filters and evidence of cis-octinoxate formation in Adriatic coastal waters: Environmental implications

  • Zulfiqar, Hira
  • Llompart Vizoso, María del Pilar
  • Castiñeira Landeira, Ana
  • Coralli, Irene
  • Vassura, Ivano
  • Fabbri, Daniele
UV filters used in personal care products are increasingly recognised as emerging contaminants due to their persistence and ecological risks. Detected in aquatic systems at concentrations from ng L−1 to μg L−1, their monitoring is essential for environmental risk assessment but challenging because of their diverse physicochemical properties, requiring sensitive analytical methods. This study optimised a solid-phase extraction gas chromatography–tandem mass spectrometry (SPE-GC–MS/MS) method for the simultaneous determination of twelve UV filters in marine waters. The method showed suitable linearity, precision, and recoveries, with detection limits below 1 ng L−1. Seawater samples collected along the Adriatic coast (Rimini and Riccione, Italy) during peak recreational activity were analysed. All twelve UV filters were detected, with octocrylene (up to 23,100 ng L−1), homosalate (up to 16,400 ng L−1), and ethylhexyl salicylate (up to 10,900 ng L−1) being most abundant. Trans-2-Ethylhexyl methoxycinnamate (E-EHMC, the trans isomer of octinoxate, 13–1474 ng L−1) occurred consistently with its isomer Z-EHMC (cis-octinoxate), contributing 18–64 % of total (E + Z)-EHMC, suggesting in situ photochemical conversion, since the cis form is negligible in cosmetic products. Benzophenone, ethylhexyl dimethyl PABA, 4-methylbenzylidene camphor, benzyl salicylate, and isoamyl methoxycinnamate were found at lower yet relevant concentrations. UV filters banned under European regulations, such as menthyl anthranilate and etocrylene, were absent or barely detected. This work provides the first data on sunscreen UV filters in Adriatic coastal waters and the first quantitative evidence of Z-EHMC in environmental waters, highlighting its in situ formation and contributing to understanding their environmental fate and risks.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Multiresidue microextraction–GC-MS/MS for emerging tire rubber contaminants in urban waters

  • Duque Villaverde, Andrés
  • Dagnac, Thierry
  • Llompart Vizoso, María del Pilar
Tire rubber contains many chemicals that can enter aquatic ecosystems through tire wear particles or leachates from crumb rubber surfaces. The antiozonant N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD) and its transformation product, 6PPD-quinone, are of particular concern due to their toxicity associated with aquatic species mortality. Other relevant compounds from the PPD family are DPPD and IPPD. Vulcanizing and crosslinking agents, including benzothiazole, 2-mercaptobenzothiazole, N-cyclohexylbenzothiazole-2-sulfenamide (CBS) and hexamethoxymethylmelamine (HMMM), together with alkyl organophosphate esters and alkyldimethylamines are also of great interest. This work aimed to develop an analytical method for detecting and quantifying 11 emerging tire rubber contaminants in urban waters. The method is based on solid-phase microextraction (SPME) using commercial fibers followed by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). SPME parameters were optimized via multivariate design to efficiently extract all analytes. The method was successfully validated for linearity, precision, and accuracy, with mean recoveries of 84–105%. In all the urban water samples analyzed, 6PPD and 6PPDQ were detected. To our knowledge, this is the first time that GC–MS/MS has been applied to the analysis of most of these compounds, including PPDs, as well as the first proposal of SPME for the extraction and analysis of many of these compounds. This is also the first investigation of these substances in real water samples originating from recycled tire rubber surfaces as a potential source of contamination. Due to its simplicity, this multiresidue method, which includes antiozonants, vulcanizing, and crosslinking agents, can be easily implemented in any routine laboratory.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A perspective on current and future metric tools

  • Pena Pereira, Francisco Javier
  • Benedé, Juan L.
Assessment tools have attracted immense interest in the analytical field in recent years, and remarkable developments have been described toward increasing levels of refinement. However, substantial improvements of metric tools are still needed to obtain highly relevant information about analytical systems in an efficient manner while maintaining or increasing their user friendliness, minimizing their potential subjectivity, and ensuring a high reliability and comparability. The present perspective identifies areas of improvement of currently available metric tools and highlights potential initiatives to be tackled toward advanced metric tools, Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Agencia Estatal de Investigación | Ref. RED-2022-134079-T, Universidade de Vigo/CISUG
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Co-based magnetic eutectic mixture for the extraction of trace metals in essential oils used in cosmetic industry prior to analysis by inductively coupled plasma optical emission spectrometry

  • Abellán-Martín, Sergio J.
  • Kaynarova, Lidia
  • Georgieva, Deyana
  • Simitchiev, Kiril
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
Background: Cosmetic products are widely used today and are often associated with a healthy lifestyle. However, their widespread application and the presence of potentially toxic substances have raised increasing concerns regarding their impact on human health. Among these substances, metals are particularly hazardous due to their ability to penetrate the skin and cause adverse health effects, even at very low concentrations. Therefore, the development of novel and reliable methodologies for the determination of trace metals in cosmetics is of great importance for ensuring product safety. Results: A new analytical method based on a magnetic eutectic mixture (MEM) ultrasound-assisted emulsification-micro-extraction (USAEME) followed by inductively coupled plasma optical emission spectrometry (ICP OES) for trace metals in cosmetics has been developed. The extraction procedure was optimized using a multivariate approach. The method was evaluated under optimized extraction conditions (i.e., sample mass, 11 g; MEM volume, 59 μL; extraction time, 3 min and ultrasound as dispersive mode). Limits of detection from 0.05 to 5.4 μg kg-1 were obtained, and the repeatability was evaluated at two different levels (i.e., 75 and 300 μg kg-1), resulting in relative standard deviations below 5 % (n = 5). Enhanced sensitivity was achieved, with enrichment factors ranging from 15 to 67 compared to direct ICP OES analysis. The method applicability was assessed through recovery studies using two real essential oil samples (i.e., Pelargonium graveolens and lavender) used in cosmetic manufacture. The recovery values obtained ranged between 94 and 116% for all the elements. Significance: A novel, rapid, sensitive, and environmentally sustainable method was developed for the simultaneous determination of Al, Cd, Cr, Cu, Mn, Pb, and Zn in essential oil samples using ICP OES. The methodology incorporated a preconcentration step via USAEME employing a new designed Co-based MEM (i.e., cobalt (II) chloride hexahydrated:ethylene glycol, 1:2).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemically controlled liquid-liquid microextraction: an innovative methodology for heavy metal extraction from tea using non-toxic menthol-based eutectic mixture

  • Marco, Andrea
  • Aguirre Pastor, Miguel Ángel
  • Quijada Tomás, César
  • Hidalgo, Montserrat
  • Marco, Andrea|||/items/ed30abdd-8076-4a93-a527-2b2d5366f59f
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Hidalgo, Montserrat|||/items/8c122b2d-4d92-45f3-ad75-e863e4e18750
Background: A growing concern about toxic metal contamination in food has generated a need for efficient, sustainable, and non-toxic sample preparation techniques. Conventional extraction methodologies frequently entail the utilization of hazardous solvents or exhibit a lack of sensitivity. There is an increasing demand for analytical methodologies that are more environmentally friendly and capable of extracting trace metals from complex matrices, such as tea. This study aims to address the need for an efficient and environmentally friendly method for the extraction of metals from tea samples using a combination of electrochemically assisted microextraction and a eutectic mixture as extractant. Results: An innovative electrochemically enhanced liquid-liquid microextraction technique has been developed, employing a green eutectic mixture composed of a menthol-based hydrophobic deep eutectic solvent (menthol:decanoic acid, 2:1) and a non-toxic ionic liquid (1-hexyl-3-methylimidazolium chloride) to enhance conductivity. The experimental conditions for the extraction procedure were optimized through the implementation of a design of experiments approach. In the context of optimal conditions (i.e., 10 g sample, 315 μL extractant, 5 min extraction, pH 4.66, 1 wt% 8-hydroxyquinoline, 600 rpm shaking and a single −0.75 V pulse vs. Ag), the method demonstrated excellent linearity, repeatability, and low limits of detection: 0.2, 0.2, 0.7, 2.8 and 0.5 μg kg−1 for Cd, Cr, Ni, Pb and Zn, respectively. The recovery of real and certified tea samples approached 100 %, with negligible matrix effects. Furthermore, no analytes exceeded the maximum permissible limits established by legislation in the infused samples under study. Significance: The proposed method represents a substantial advance in sustainable analytical chemistry, as it facilitates the efficient extraction of metals from tea without the use of toxic solvents. Its performance and environmental compatibility position it as a solid alternative for routine metal analysis in food safety monitoring.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Stimulus-responsive smart solvents and their application in analytical liquid-liquid (micro)extraction techniques

  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Ahmadi, Mazaher
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
Switchable-hydrophilicity solvents are a new type of solvents that could be very promising for liquid-liquid (micro)extraction. Nevertheless, they have been scarcely used in this critical step of chemical analysis. This article presents a comprehensive and critical review of fundamentals, chemical factors and stimulus, that reversibly modify the polarity of these solvents. This unique characteristic allows the reversible transition of the solvent from a hydrophobic to a hydrophilic state, favoring liquid-liquid (micro)extraction. Special attention is paid to new types of stimuli as light and voltage to extend the applicability of these exciting solvents in liquid-liquid (micro)extraction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synergistic combination of natural deep eutectic solvent and chemical vapor generation for trace determination of As, Cd, Hg and Pb in drug samples by inductively coupled plasma optical emission spectrometry

  • Abellán-Martín, Sergio J.
  • Pérez, Jorge
  • Pinheiro, Fernanda C.
  • Nóbrega, Joaquim A.
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Pérez, Jorge|||/items/e306700e-e606-4a9e-844f-b45528fa9b23
A new and environmentally friendly analytical method for simultaneous determination of As, Cd, Hg and Pb in drug samples by inductively coupled plasma optical emission spectrometry (ICP OES) has been developed. In order to increase the sensitivity of the analysis, a multinebulizer has been used for chemical vapor generation (CVG) after a dispersive liquid-liquid microextraction (DLLME) procedure using a natural deep eutectic solvent (NADES) as extractant solvent. The factors affecting analyte extraction and on-line chemical vapor generation have been optimized by multivariate analysis. Under optimized conditions, DLLME-CVG-ICP OES improved limit of quantitation (LOQ) values on average 50-fold higher compared with direct ICP OES analysis and afforded an increase of the sensitivity (i.e., enrichment factor) on average 25-times higher than those obtained with CVG-ICP OES analysis. According to the United States Pharmacopoeia (USP) Chapter 232, it means LOQ values are on average 4.3-times lower than their respective 0.3J values for the target-elements from class 1. Trueness has been evaluated by recovery experiments following USP recommendations for two oral drug samples in solid dosage form (i.e., commercial dosage tablets). In addition, the greenness of the developed method has been evaluated using the AGREEprep metrics, showing an excellent green character since it includes the miniaturization of the sample preparation procedure using a reduced volume (i.e., few microliters) of a non-hazardous extractant solvent for multielemental analysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tunable Properties of Non-Volatile Magnetic Mixtures on Different Surfaces

  • Abellán-Martín, Sergio J.
  • Zapater, Cristina
  • González-Gallardo, Nerea
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Ramón, Diego J.
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Ramón, Diego J.|||/items/cede7c2c-35fe-43e3-8148-905611ae6646
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Zapater, Cristina|||/items/167e0084-0fbb-4747-9758-ade350b2e3e2
  • González-Gallardo, Nerea|||/items/cb9393bb-82cb-4197-b0eb-b0839aa18ee5
In this work, the surface nature-dependent behaviors of magnetic deep eutectic solvents (MDES) and magnetic low-transition-temperature mixtures (MLTTM) are reported for the first time. It has been observed that the surface of material where the MDES or the MLTTM is placed could considerably affect the dispersion and the magnetic and structural properties of these magnetic mixtures. Several experiments have been carried out in order to point out the differences observed in the properties depending on the material on which these magnetic mixtures are placed. As a result, it has been shown that the MDESs or MLTTMs are retained and adhered to glass surfaces, resulting in a loss of magnetism in addition to a loss in the performance of synthesis carried out on the closeness of glass materials as the interaction between the glass and the mixture modify the composition and therefore the properties. As a preliminary result, when using these magnetic mixtures as extractant solvents in dispersive liquid-liquid microextraction, the MDES or MLTTM is retained on the walls of the glass tubes reducing the extraction efficiency, repeatability and the extraction recovery using an external magnetic field. For all these reasons, polypropylene materials should be recommended when handling MDES and MLTTMs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Recent green approaches in liquid-phase microextraction

  • Aguirre Pastor, Miguel Ángel
  • Arroyo-Manzanares, Natalia
  • Carbonell-Rozas, Laura
  • Grau, José
  • Moreno, Carlos
  • Vidal, Lorena
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
The miniaturization of conventional extraction techniques, particularly microextraction methods, has led to a reduction in the use of hazardous reagents and waste. However, the continued use of toxic solvents and materials, along with time-consuming sample preparation processes, negatively impacts the overall sustainability of these methods. As a result, there is growing interest in exploring greener alternatives. This review highlights the most promising green solvents for liquid-phase microextraction, including (natural) deep eutectic solvents, low-toxicity ionic liquids, surfactants, micellar solvents, and bio-based solvents, emphasizing their applications in innovative sample preparation techniques in the last five years. Particular emphasis is placed on their use in automated and semi-automated systems, in line with the increasing role of automation in Analytical Chemistry. Selected applications have been carefully reviewed and discussed to illustrate key advances in the use of green solvents and automation for extracting a wide range of compounds from various matrices. In addition, future perspectives are outlined to guide further development of liquid-phase microextraction in alignment with current trends in green sample preparation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sensitive elemental analysis of edible oil samples using a hydrophilic eutectic mixture as green solvent in electrochemically controlled liquid-liquid microextraction

  • Marco, Andrea
  • Pertusa, Borja
  • Aguirre Pastor, Miguel Ángel
  • Quijada Tomás, César
  • Hidalgo, Montserrat
  • Marco, Andrea|||/items/ed30abdd-8076-4a93-a527-2b2d5366f59f
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Hidalgo, Montserrat|||/items/8c122b2d-4d92-45f3-ad75-e863e4e18750
Background: Analyzing toxic metals in edible oils is crucial due to the associated health risks and strict regulatory limits. Traditional extraction methods are often time-consuming and require toxic solvents. Additionally, they are sometimes ineffective in complex oil matrices. Therefore, there is a strong demand for sustainable, efficient methodologies for extracting trace metals from oils. This study presents a green, effective approach to metal extraction from various edible oils using electrochemically enhanced microextraction. Results: We present a new, environmentally friendly, electrochemically enhanced liquid-liquid microextraction (EC-LLME) method that uses a choline chloride-based deep eutectic solvent (CC:EG, 1:2) to extract Cd, Cu, Fe, Ni, and Pb from various oil samples. We optimized the extraction parameters using a two-step experimental design. Under the optimal conditions of a 15 g sample, 315 μL of extractant, a 10 min extraction time, and a -0.75 V vs Ag pulse, the method achieved excellent linearity in the range of 5–500 μg kg-1, high repeatability (CV ≤ 6%), and low detection limits: 0.16 μg·kg-1 (Cd and Fe), 0.09 μg·kg-1 (Cu), 0.4 μg·kg-1 (Ni), and 1.5 μg·kg-1 (Pb). No analyte exceeded legal limits in the three samples studied (i.e., refined rapeseed oil, refined sunflower oil, and virgin olive oil), and recoveries in real and certified samples were nearly 100%, confirming minimal matrix effects. Significance: The EC-LLME method is a novel, sustainable alternative for extracting and quantifying trace metals in edible oils. Its superb analytical capabilities and eco-friendly safety, achieved by steering clear of noxious solvents, make it a suitable option for the identification of trace metals in edible vegetable oil samples.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ethylene glycol-based dispersive liquid-liquid microextraction of bisphenols in edible oil samples

  • Zapater, Cristina
  • Vidal, Lorena
  • Aguirre Pastor, Miguel Ángel
  • Canals, Antonio
  • Zapater, Cristina|||/items/167e0084-0fbb-4747-9758-ade350b2e3e2
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
This study compares, for the firt time, the use of three different ethylene glycol-based extractant solvents in dispersive liquid-liquid microextraction (DLLME) for the determination of four bisphenols (i.e., BPF, BPA, BPAP, and BPAF) in edible oils by liquid chromatography-diode array detector (LC-DAD). The extractants studied were: pure ethylene glycol (EG), a deep eutectic solvent or DES (i.e., chlorine chloride (ChCl) and EG, 1:2 M ratio), and a magnetic deep eutectic solvent or MDES (i.e., ChCl, EG and iron chloride hexahydrate (FeCl3·6H2O), 1:4:1 M ratio). Two-step multivariate optimization was performed for EG and DES, while one-step optimization was applied for MDES. The optimal conditions for EG and DES were similar with 50 μL of extractant volume and 1 min of extraction time, except for centrifugation conditions which were 3 min and 370 g-force and 3 min and 832 g-force for EG and DES, respectively. The use of MDES required a higher volume of extractant (i.e., 75 μL) and a longer extraction time (i.e., 4.5 min). The most satisfactory results were achieved using EG, exhibiting adequate linearity (r ≥ 0.990), lower limits of detection (LODs) (i.e., 0.3 μg kg−1), excellent repeatability (RSD ≤3.2 %) for all analytes and non-significant matrix effects in real edible oil samples (i.e., relative recovery values: 71–121 %). Therefore, pure ethylene glycol is the most suitable extractant when compared to ethylene glycol-based eutectic mixtures and their magnetic variant. This finding underscores the necessity for further exploration of the pure constituents of mixtures as potential extractants.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A natural deep eutectic solvent-based liquid-liquid microextraction for the determination of bisphenols in mineral and river water samples

  • Rubio, Iván
  • Rayos, Javier
  • Ortega, Irene
  • Aguirre Pastor, Miguel Ángel
  • Vidal, Lorena
  • Canals, Antonio
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Rubio, Iván|||/items/772cfa96-2abc-46bb-a27a-eefd47ad6c5d
This study aims to develop a novel method for the determination of five bisphenols (specifically BPS, BPA, BPAP, BPAF, and BPF) in aqueous samples using a natural deep eutectic solvent (NADES) as extractant phase. The environmentally friendly extractant decanoic acid:DL-menthol (1:2 molar ratio) has been employed for the extraction and preconcentration of BPs using dispersive liquid-liquid microextraction prior to liquid chromatography coupled with a diode array detector. The methodology has been evaluated under optimized extraction conditions, namely NADES volume (50 μL), sample pH (7), extraction time (3 min), centrifugation speed (370 g-force) and centrifugation time (1 min), resulting in good linearity with correlation coefficients between 0.993 and 0.999. The relative standard deviation was found to range from 4 to 19 %, while the detection limits were established between 1.5 and 3.3 μg/L. In the course of evaluating the recovery on different water samples, including mineral water, river water, and water from an organization engaged in the direct supply of packaged drinking water to end consumers, the relative recovery values ranged between 70 and 119 %. Additionally, a migration study was conducted utilizing polycarbonate bottles. Finally, an evaluation of the method environmental impact was performed with AGREEprep metric, providing the highest value compared to previous methodologies for the same purpose.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Coupling Miniaturized Stir Bar Sorptive Dispersive Microextraction to Needle-Based Electrospray Ionization Emitters for Mass Spectrometry: Determination of Tetrahydrocannabinol in Human Saliva as a Proof of Concept

  • López-Juan, Andreu L.
  • Millán-Santiago, Jaime
  • Benedé, Juan L.
  • Chisvert, Alberto
  • Lucena, Rafael
  • Cárdenas, Soledad
Direct coupling of sample preparation with mass spectrometry (MS) can speed up analysis, enabling faster decision-making. In such combinations, where the analysis time is mainly defined by the extraction procedure, magnetic dispersive solid-phase extraction emerges as a relevant technique because of its rapid workflow. The dispersion and retrieval of the magnetic sorbent are typically uncoupled stages, thus reducing the potential simplicity. Stir bar sorptive dispersive microextraction (SBSDME) is a novel technique that integrates both stages into a single device. Its miniaturization (mSBSDME) makes it more portable and compatible with low-availability samples. This article reports the direct combination of mSBSDME and MS using a needle-based electrospray ionization (NESI) emitter as the interface. This combination is applied to determine tetrahydrocannabinol in saliva samples, a relevant societal problem if the global consumption rates of cannabis are considered. The coupling requires only the transference of the magnet (containing the sorbent and the isolated analyte) from the mSBSDME to the hub of a hypodermic needle, where the online elution occurs. The application of 5 kV on the needle forms an electrospray on its tip, transferring the ionized analyte to the MS inlet. The excellent performance of mSBSDME-NESI-MS/MS relies on the sensitivity (limits of detection as low as 2.25 ng mL–1), the precision (relative standard deviation lower than 15%), and the accuracy (relative recoveries ranged from 87 to 127%) obtained. According to the results, the mSBSDME-NESI-MS/MS technique promises faster and more efficient chemical analysis in MS-based applications.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Silica microparticles as guiding substrates for the fabrication of polyamide-coated stainless-steel sheets by dip-coating technique: Application to the determination of opioids in saliva samples by direct infusion mass spectrometry

  • Pedraza-Soto, Ana M.
  • Lucena, Rafael
  • Cárdenas, Soledad
Background Dip-coating is a simple and cost-effective technique for synthesizing thin film sorptive phases in microextraction. The success of the coating (amount and homogeneity) relies dramatically on the wettability of the substrate, thus making the covering of smooth-surface substrates challenging. In these cases, prior to the slurry (particles and binder) deposition, the smooth-surface substrate typically requires an aggressive etching step (e.g., treating the surface with strong acids or bases) to increase the roughness of the metallic substrate. This strategy has a clear environmental and operational safety impact and increases the associated costs. Results In this article, we explored the use of amorphous silica gel particles as a cost-effective guiding substrate to improve the wettability and increase the superficial area of the final coating. For this purpose, a double-sided adhesive tape is used to immobilize the silica particles over stainless-steel sheets, thus creating a porous substrate where a thin layer of polymer is finally deposited by dip-coating. The resulting nylon-silica gel sheets (NSG-sheet) have been evaluated for the extraction of some opioids (codeine, methadone, oxycodone, and tramadol) from saliva samples and their direct infusion mass spectrometry analysis. The developed method allows the determination of the analytes at the low μg L−1 range with levels with intra- and inter-day precision, expressed as relative standard deviation, better than 9.5 and 13.7 %, respectively. Significance and novelty This research deepens the potential of adhesive tapes for designing novel sorptive phases. It also provides a straightforward approach to synthesizing thin film microextraction devices using affordable and sustainable materials and procedures. The resulting analytical method has been thoroughly validated, and it has been demonstrated to be competitive with existing methods. Also, the potential of the devices in on-site extraction procedures has been preliminarily explored.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Quantitative determination of drug residues in surfaces, analyzing cotton-swabs by on/off thermal desorption-plasma based ionization-mass spectrometry

  • Cárdenas, Soledad
  • Calero-Cañuelo, Carlos
  • Lucena, Rafael
  • Cárdenas, Soledad
Background The determination of drug residues in surfaces is a relevant analytical problem in forensic sciences. Ambient ionization mass spectrometry (AIMS) has revolutionized this field, providing high sensitivity and selectivity levels at shorter analysis times, thus permitting quick decision-making. Those surfaces that cannot be directly measured require their previous sampling with an appropriate swab that can finally be analyzed by AIMS. In this field, dielectric barrier discharge ionization is a great alternative for analyzing swabs after surface sampling in a quick and easy way. Results In this work, we propose sampling the surface with a cotton swab wet with an internal standard (IS) for better precision and easier quantification. After sampling, the swab is placed in a dedicated interface where an on/off thermal desorption takes place in front of the low-temperature plasma ionization source. The method was applied to the determination of three drugs in different surfaces, providing limits of detections as low as 0.01 ng/cm2. The intra-day and inter-day precision at the limit of quantification, expressed as relative standard deviation, were better than 10.8 and 15.2 %, respectively. The accuracy, expressed as relative recovery, was in the range of 81.6–124.5 %. Finally, the effect of the swab type on the analytical performance was evaluated. The use of a commercial swab is highly recommended. Significance and novelty This research succeeded in developing a simple methodology for the analysis of drugs on surfaces using cotton swabs. For this purpose, a methanolic solution containing the ISs facilitated sample collection and allowed the quantitative analysis. Also, a rapid analysis of the samples was carried out in an interface built with simple elements, making the whole process affordable and simple. The approach can be considered almost solventless (20 μL per sample), thus reducing the environmental impact.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Microbeads from recycled polystyrene yogurt cups for the in-syringe micro solid-phase extraction of four opioids from environmental and biological sample

  • Antonelli, Lorenzo
  • López-Lorente, A.I.
  • Gentili, Alessandra
  • Lucena, Rafael
  • Cárdenas, Soledad
A novel procedure for the extraction and determination of four opioids from environmental and biological fluids is presented. The main goal of this study is to introduce an innovative method for recycling plastic waste (i.e., polystyrene), aiming to achieve a consistent and dependable microstructure. Polystyrene microbeads, deposited on a rounded piece of paper, have been used as a sorbent material in an in-syringe extraction device. For the preparation of the polymeric sorbent, an emulsion solidification technique was optimized, achieving a regular micro material, obtained from second-hand regenerated polystyrene polymer from yogurt cups. This work presents, for the first time, the use of recycled polystyrene as micro-sorbent integrated into a paper-based support, combining waste valorization with effective analyte extraction. Under the optimum conditions, methadone, tramadol, codeine, and morphine were determined by direct injection mass spectrometry in environmental water as well as biofluids as saliva and urine. Limits of detection lower than 8 μg L−1 and precision better than 14.9 % have been obtained for all the analytes in saliva and environmental water samples. The interference of the endogenous compounds of urine prevents the determination of morphine and codeine in this matrix. The trueness, expressed as relative recovery (RR), ranged from 85 % to 114 %. The extraction device has proved to be a valid and sustainable alternative to traditional sorbents, offering good analytical standards and being transversal for the application to different matrices. The simplicity and environmental friendliness of this approach make it highly adaptable across various research and industrial domains.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrophobic natural deep eutectic solvents based on L-menthol as supported liquid membrane for hollow fiber liquid-phase microextraction of triazines from water and urine samples

  • Díaz-Álvarez, Myriam
  • Turiel Trujillo, Esther
  • Martín Esteban, Antonio
This work proposes the use of a hydrophobic natural deep eutectic solvent (NADES) as a supported liquid membrane (SLM) for hollow fiber liquid phase microextraction (HF-LPME) of triazines. NADES were prepared using L-menthol as hydrogen bond acceptor combined with different hydrogen bond donors of natural origin: carboxlylic acids, alcohols and amines. Studies were carried out to determine whether the prepared NADES met the necessary requirements to be used as a SLM, such as stability in the HF and compatibility with HPLC. Then, the ability of each prepared NADES to extract 6 triazine herbicides by HF-LPME from aqueous samples was evaluated. Among them, the mixture L-menthol: formic acid (molar ratio 1:2) provided better extraction results and was selected as SLM. The influence the different parameters on extraction efficiency such as pH of both sample and acceptor solution, salting-out effect, extraction time and stirring rate on the extraction efficiency was carefully studied and optimized. The optimized HF-LPME procedure was applied to the analysis of aqueous samples such as artificial water containing humic acids, tap water, river water and urine, with excellent clean-up ability for all samples analyzed. Relative recoveries ranged from 68 to 128 %, and the LODs and LOQs obtained for the 6 triazines were 0.75–3.1 µg/L and 2.5–10.3 µg/L, respectively, depending on the analyte and the kind of sample. Additionally, according to the AGREEprep tool assessment, the proposed method appears as a greener approach compared to other microextraction methods reported in the literature for the analysis of triazines in water samples., The Grant PID2021-122327OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” is gratefully acknowledged. This article is based upon work from the National Thematic Network on Sustainable Sample Treatment (RED2022-134079-T) funded by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, supported by the Division of Analytical Chemistry of the European Chemical Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Natural deep eutectic solvents as sustainable alternative for the Ultrasound-Assisted extraction of triazines from agricultural soils

  • Turiel Trujillo, Esther
  • Díaz-Álvarez, Myriam
  • Martín Esteban, Antonio
9 Pág., Natural deep eutectic solvents (NADES) have gained much attention as a viable and sustainable alternative to traditional organic solvents in multiple areas of analytical chemistry, including extraction of contaminants from samples of environmental concern. In this work, a total of 68 potential NADES have been assayed and further evaluated as sustainable solvents in the development of an ultrasound (US)-assisted extraction method for triazinic herbicides from agricultural soil samples and final determination by HPLC-UV. Choline chloride (ChCl) was used as hydrogen bond acceptor (HBA), and different carboxylic acids, alcohols and amines were tested as hydrogen bond donors (HBDs) in different molar ratios in order to find the optimum combination able to form appropriated NADES for the extraction of triazines. Among the different ChCl:carboxylic acids mixtures tested, those consisting of ChCl:formic acid and ChCl:acetic acid, both in a molar ratio 1:2, presented the better physico-chemical properties (pH, stability at room temperature, water miscibility, etc.). Concerning amines, NADES could not be obtained at any of the combination assayed whereas, among the alcohols tested, 2,3-butanediol was found to be the most appropriated for NADES formation. A three-level factorial design was then used to further evaluate the effect of time and temperature on the ability of these selected optimum NADES for the US-assisted extraction of triazines from agricultural soil samples. Under optimal conditions, the developed US-assisted extraction method provided quantitative recoveries (from 87 to 104 %) with good reproducibility (RSDs lower than 12 %) and limits of detection (LODs) lower than 0.05 μg g−1 for all target triazines., The Grant PID2021-122327OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” is gratefully acknowledged. This article is based upon work from the National Thematic Network on Sustainable Sample Treatment (RED2022-134079-T) funded by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, supported by the Division of Analytical Chemistry of the European Chemical Society. Authors wish thank Mar Albarrán for supplying soil samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of deep eutectic solvents in the synthesis of molecularly imprinted fibers for the solid-phase microextraction of triazines in soil samples

  • Monnier, Alexia
  • Díaz-Álvarez, Myriam
  • Turiel Trujillo, Esther
  • Martín Esteban, Antonio
11 Pág., Nowadays, molecularly imprinted polymers (MIPs) are well established and are considered excellent materials for performing selective extractions. However, with the progressive implementation of the principles of green chemistry, it is necessary to find greener alternatives for both the synthesis and further use of MIPs in sample preparation. Accordingly, in the present work, different deep eutectic solvents (DES, both hydrophilic and hydrophobic), as an alternative to conventional organic solvents (i.e., toluene), were evaluated as porogens for the synthesis of imprinted fibers (monoliths), using fused silica capillaries as molds, for solid-phase microextraction (SPME). From this study, the polymer prepared with propazine (dummy template), methacrylic acid (monomer), ethylene glycol dimethacrylate (cross-linker), and a formic acid:L-menthol (1:1) DES (porogen) showed the best performance for selective rebinding of triazines. After optimization of the different variables involved in SPME, the new imprinted fibers were successfully applied to the extraction of target analytes (desisopropylatrazine, desethylatrazine, simazine, and atrazine) from soil sample extracts, providing relative recoveries ranging from 75.7 to 120.1%, reaching limits of detection within the range of 6.2-15.7 ng g-1, depending upon the analyte., The Grant PID2021-122327OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” is gratefully acknowledged. This article is based upon work from the National Thematic Network on Sustainable Sample Treatment (RED2022-134079-T) funded by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, supported by the Division of Analytical Chemistry of the European Chemical Society., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasound-assisted extraction of sulfonamides from soil samples using natural deep eutectic solvents and their determination by liquid chromatography tandem mass spectrometry

  • García Valcárcel, Ana Isabel
  • Martín Esteban, Antonio
8 Pág., In this work, several potential natural deep eutectic solvents (NADES) were evaluated as sustainable solvents in the development of an ultrasound (US)-assisted extraction method for sulfonamides from soil samples and final determination by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Choline chloride (ChCl) was used as hydrogen bond acceptor (HBA), and different carboxylic acids and alcohols were tested as hydrogen bond donors (HBDs) in different molar ratios in order to find the optimum combination able to form appropriated NADES for the extraction of sulfonamides. Among the different mixtures tested, the one consisting of ChCl:1,3-propanediol in a molar ratio of 1:4 showed the better physico-chemical properties and was selected for the US-assisted extraction of sulfonamides. Under optimum conditions, no matrix effect was observed and quantitative recoveries, ranging from 81.9 % to 103.9 % with relative standard deviations (RSDs) lower than 8 % were obtained, reaching limits of quantification within the range 8.5–31 µg Kg−1, depending upon the analyte. In addition, after evaluation by AGREEprep, Sample Preparation Metric of Sustainability (SPMS) and Blue Applicability Grade Index (BAGI) metrics tools, the proposed method was found to be superior to other published methods in terms of safety and environmental impact with good applicability potential., The Grant PID2021-122327OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” is gratefully acknowledged. This article is based upon work from the National Thematic Network on Sustainable Sample Treatment (RED2022-134079-T) funded by the Spanish Ministry of Science and Innovation, and the Sample Preparation Study Group and Network, supported by the Division of Analytical Chemistry of the European Chemical Society. Authors wish to thanks Jennifer Ayala and Esther Turiel for their collaboration in the experimental work and for fruitful comments and discussions during the development of the present work., Peer reviewed