Pasar al contenido principal

PARTICULAS DE NEUMATICOS: PREOCUPACION MEDIOAMBIENTAL E IMPLICACIONES PARA LA SALUD

PID2022-140148OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Development of an analytical method based on derivatisation solid-phase microextraction combined with gas chromatography-mass spectrometry for the determination of bisphenol analogues in environmental waters

  • Zulfiqar, Hira
  • Llompart Vizoso, María del Pilar
  • Montero Redondo, Natalia
  • Duque Villaverde, Andrés
  • Fabbri, Daniele
Bisphenol analogues, including bisphenol A (BPA), are pervasive environmental contaminants known for their endocrine-disrupting properties. With the increasing use of alternative bisphenols due to regulatory restrictions on BPA, monitoring their presence in aquatic systems is critical. However, their low concentrations in environmental matrices complicate their detection. This study presents the optimisation using an experimental design of a solid phase-microextraction (SPME) method, coupled with gas chromatography-mass spectrometry (GC–MS), for the determination of nine bisphenols analogues (BPA, BPAF, BPF, BPE, BPG, BPB, BPZ, BPZ, and BPC2) in drinking water, environmental waters, and wastewater samples. Acetylation was used as a derivatisation technique to improve the analytes’ volatility and stability. The optimized method compromises the extraction of 15 mL of water by DVB/CAR/PDMS fibre in direction immersion mode adding 50 µL of acetic anhydride. The temperature was 100 °C and the extraction time 30 min. Method validation demonstrated excellent linearity (R2 > 0.999), low detection limits in the low µg L−1 range, and general recoveries above 80 % in real samples. The application to 19 water samples revealed the presence of seven bisphenols analogues reaching up to 3.4 μg L−1, with BPE detected at the highest concentrations and BPA as the most frequently detected compound. This method provides a sensitive, efficient, and environmentally sustainable approach for the analysis of bisphenols in complex water matrices, aligning with green chemistry principles.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Metal and metalloid content in real urban synthetic surfaces made of recycled tire crumb rubber including playgrounds and football fields

  • Duque Villaverde, Andrés
  • Sóñora Otero, Sergio
  • Dagnac, Thierry
  • Roca Bordello, Enrique
  • Llompart Vizoso, María del Pilar
The disposal of end-of-life tires (ELTs) is an important issue in the context of solid waste management. In the last decades, the main recycling route consists of the ELTs transformation in crumb rubber, which is widely used worldwide in playgrounds and sports fields as infill material. Crumb rubber represents the largest source of intentional microplastics in the environment. This microplastic material contains high metal concentration including toxic and heavy metals. Few studies deal with the metal(loid) characterization of real crumb rubber samples taken in situ from sports and leisure facilities. Research is especially scarce for playgrounds, despite interest due to the population using these facilities (children). This study aims at addressing the metal(loid) distribution in a large number of real samples from different urban places, most from Galicia (NW Spain) but also from other countries. 32 elements including metals (Ag, Al, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, In, K, Li, Mg, Mn, Mo, Na, Nb, Ni, Pb, Se, Sr, Ti, Tl, U, V, Zn) and 4 metalloids (As, B, Sb, Si) were determined. For comparison purposes, some alternative materials (cork, sand, and thermoplastic elastomers) were collected. The results showed high Zn levels (1–2 %) in crumb rubber, exceeding the safety limits set in the European directives for related matrices. Heavy and toxic elements (Pb, Cr, As, Cd, Sb) were found in all samples, reaching concentrations up to 100 mg kg−1. Co presented concentrations of 200 mg kg−1, well above the safety limits (10 mg kg−1 for toys). ANOVA showed statistical differences between playgrounds and football fields for some elements. The alternative materials proved safer regarding metal(loid) content. This study is the largest one about metal(loid) characterization in crumb rubber surfaces attending the number of samples, origin, and elements analyzed.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Multiresidue microextraction–GC-MS/MS for emerging tire rubber contaminants in urban waters

  • Duque Villaverde, Andrés
  • Dagnac, Thierry
  • Llompart Vizoso, María del Pilar
Tire rubber contains many chemicals that can enter aquatic ecosystems through tire wear particles or leachates from crumb rubber surfaces. The antiozonant N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD) and its transformation product, 6PPD-quinone, are of particular concern due to their toxicity associated with aquatic species mortality. Other relevant compounds from the PPD family are DPPD and IPPD. Vulcanizing and crosslinking agents, including benzothiazole, 2-mercaptobenzothiazole, N-cyclohexylbenzothiazole-2-sulfenamide (CBS) and hexamethoxymethylmelamine (HMMM), together with alkyl organophosphate esters and alkyldimethylamines are also of great interest. This work aimed to develop an analytical method for detecting and quantifying 11 emerging tire rubber contaminants in urban waters. The method is based on solid-phase microextraction (SPME) using commercial fibers followed by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). SPME parameters were optimized via multivariate design to efficiently extract all analytes. The method was successfully validated for linearity, precision, and accuracy, with mean recoveries of 84–105%. In all the urban water samples analyzed, 6PPD and 6PPDQ were detected. To our knowledge, this is the first time that GC–MS/MS has been applied to the analysis of most of these compounds, including PPDs, as well as the first proposal of SPME for the extraction and analysis of many of these compounds. This is also the first investigation of these substances in real water samples originating from recycled tire rubber surfaces as a potential source of contamination. Due to its simplicity, this multiresidue method, which includes antiozonants, vulcanizing, and crosslinking agents, can be easily implemented in any routine laboratory.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Development of an analytical method for emerging contaminants including the pharmaceuticals recently selected as key performance indicators of the quaternary treatment of urban wastewater

  • Duque Villaverde, Andrés
  • Sóñora Otero, Sergio
  • Antonelli, Raissa
  • Vilar, Vítor J.P.
  • Carro Díaz, Antonia María
  • Dagnac, Thierry
  • Llompart Vizoso, María del Pilar
The revised European Directive concerning Urban Wastewater Treatment introduced the quaternary treatment for micropollutants. This directive lists 13 substances used as indicators of the performance of quaternary treatment, including pharmaceuticals such as antihypertensives and antidepressants, as well as some benzotriazoles. This article describes the development of an analytical method to determine these analytes and tire-related contaminants in wastewater and environmental samples. The method involves solid-phase extraction (SPE) followed by liquid chromatography coupled to tandem mass spectrometry (MS/MS) and high-resolution mass spectrometry (QTOF-HRMS). An experimental design is carried out to evaluate the influence of four factors affecting the extraction. Further studies were performed to achieve higher enrichment and thus lower detection limits. The method is validated in terms of analytical figures, and the matrix effect is assessed in water samples of different origins, demonstrating suitability. Real samples were analyzed showing the presence of some of the target compounds in natural waters (sea and river). In the wastewater samples, almost all the substances included in the directive, such as diclofenac, irbesartan or benzotriazole, were detected at levels up to 3 μg L−1. This method will help to assess the risks that the discharge of the targeted contaminants in urban wastewater poses for the environment and public health.