Pasar al contenido principal

TECNICAS DE MICROEXTRACCION Y ANALISIS IN SITU SOSTENIBLES EN DISPOSITIVOS FLEXIBLES Y BARATOS Y MATERIALES POROSOS AVANZADOS PARA APLICACIONES ALIMENTARIAS Y MEDIOAMBIENTALES

PID2021-125459OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aptamer-modified magnetic nanoparticles for extraction of atrazine in environmental water samples

  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Meseguer-Lloret, S.|||0000-0001-5726-032X
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Simó-Alfonso, Ernesto Francisco
  • Herrero Martínez, José Manuel
[EN] In this work, a novel aptamer magnetic sorbent was prepared and used as magnetic solid-phase extraction sorbent for selective isolation of atrazine (ATZ) in water samples. The magnetic oligosorbent was fabricated by immobilizing DNA aptamer onto the surface of vinylized magnetic nanoparticles (VMNPs) via ¿thiol-ene¿ click chemistry reaction. After optimization of different aptamer coupling parameters, the following experimental conditions were found to give best results: 100 mg VMNPs incubated with 1 ¿mol L¿1 thiol-modified aptamer for 5 h at 55 °C. The resulting oligosorbent was characterized by different instrumental techniques such as transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and inductively coupled plasma mass spectrometry (ICP-MS). Then, several parameters of the extraction protocol were investigated to achieve the best ATZ extraction performance. The optimized aptamer-based magnetic solid-phase extraction (Apt-MSPE) protocol followed by HPLC with diode-array detection gave detection and quantification limits for ATZ of 0.005 µg L¿1 and 0.018 µg L¿1, respectively. The applicability of this protocol was demonstrated by analyzing several environmental water samples from of different sources with recovery values from 85.5 to 94% and relative standard deviations less than 2.5%. Moreover, the developed Apt-MNPs sorbent could be re-used at least 12 times, without losses in its extraction capacity., This work was supported by projects RTI2018-095536-B-I00 and PID2021-125459OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In-house metal-organic framework material for stir-bar sorptive extraction of acidic pharmaceutical compounds from environmental water samples

  • Trullàs, Abril
  • Martínez-Pérez-Cejuela, Héctor
  • Borrull, Francesc
  • Herrero Martínez, José Manuel
  • Marcé, Rosa Maria
  • Fontanals, Núria
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
[EN] Pharmaceutical residues are emerging contaminants in aquatic environments due to widespread use, improper disposal and incomplete removal in wastewater treatment plants. Although usually present at trace levels, they can pose ecological risks because of their bioaccumulation potential and biological activity. This study develops and evaluates a low-cost in-house hybrid coating for stir-bar sorptive extraction (SBSE) designed to improve the recovery of polar acidic pharmaceuticals. The coating is based on an amine-functionalized metal-organic framework providing weak anion exchange interactions, attached to a glycidyl methacrylate monolith (GMA@NH2-UiO-66(Zr)), with an estimated cost below 5 EUR per unit. The method was optimized and coupled to liquid chromatography tandem mass spectrometry (LC-MS/MS) for analysis of environmental waters. In river water, the approach achieved limits of detection around 2 ng/L, recoveries of 22 to 41 percent, matrix effects between plus 9 and minus 2 percent, and precision with relative standard deviation below 25 percent. After validation, the method was applied to real samples, detecting acidic pharmaceuticals at ng/L levels. The new SBSE material showed improved retention of polar compounds, good mechanical stability, and reproducibility, supporting its use for routine monitoring of pharmaceutical contaminants in environmental waters., These results are part of the project PID2023-148939NB-I00, PID2021-125459OB-I00, and grant RED2022-134079-T funded by MICIU/AEI/10.13039/501100011033 and "ERDF/EU". They were possible thanks to the support of the Joan Oro predoctoral grant program from the Department of Research and Universities of the Government of Catalonia and co-financing by the European Social Fund Plus (2024FISDU00309).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protein fingerprinting using gold nanoparticle-assisted SPE and HPLC-UV: A promising tool for chemometric authentication of monofloral honeys

  • Ogando-Rivas, Paola Teresa
  • Simo-Alfonso, Ernesto Francisco
  • Carrasco-Correa, Enrique Javier
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
[EN] Authentication of honey according to its botanical origin is essential for quality control. Traditional melissopalynological methods are time-consuming and subjective, motivating the search for faster alternatives. In this work, HPLC-UV protein fingerprinting approach was developed to classify honeys of different floral origins. Previously, proteins were isolated and preconcentrated using a gold nanoparticle-assisted solid-phase extraction. 61 Spanish honey samples from chestnut, heather, and thyme origins were studied where 27 different beederived proteins were identified. Distinct protein fingerprint patterns were observed where heather showed the most diverse SPE protein fingerprint, chestnut honey a more balanced distribution and thyme honey displayed higher levels of stress-related proteins. A linear discriminant analysis model was developed using sumnormalized protein abundances. The model was trained with 40 samples and externally validated with 21 independent samples, achieving 100% correct classification. The results demonstrate that bee-origin proteins reflect floral influences and can serve as stable biomarkers for honey authentication., This research was funded by the Next Generation European Union and the Plan de Recuperacio n, Transformacio n y Resiliencia of the Spanish Government, with the support of Generalitat Valenciana (project AGROALNEXT/2022/043) . The authors also wish to thank the Spanish MAPA (Ministerio de Agricultura Pesca y Alimentacio n) for the research contract titled "Estudio De Caracterizacio n De Las Principales Mieles Monoflorales Espan olas" entered in col-laboration with Labora-tory of Honey Quality Control (LABMIEL) of the Universitat Politecnica de Valencia (UPV) . This study was also supported by grants PID2021-125459OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and by the Generalitat Valenciana through projects CIAICO/2022/183 and CIGE/2023/069. This study is part of the Advanced Materials program and received support from MICIN with funding from the European Union Next Generation EU (PRTR-C17 & sdot; I1) and the Generalitat Valenciana (MFA/2022/034) . Paola T. Ogando Rivas acknowledges the Ministerio de Educacio n Superior, Ciencia y Tecnologia (MESCYT) of the Dominican Republic for the scholarship awarded. This article is based on research from the Sample Preparation Study Group and Network, supported by the Division of Analytical Chemistry of the European Chemical Society (DAC-EuChemS) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aptamer-functionalized stir bar sorptive extraction for selective isolation, identification and determination of concanavalin A in food by MALDI-TOF-MS

  • Vergara-Barberán, María
  • Simó-Alfonso, Ernesto F.
  • Benavente, Fernando
  • Herrero-Martínez, José Manuel
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
[EN] An aptamer-functionalized stir bar sorptive extraction (SBSE) coating is described for the first time devoted to selective isolation and preconcentration of an allergenic food protein, concavanalin A (Con A), followed by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF-MS) determination. For this purpose, the polytetrafluoroethylene surface of commercial magnetic stir bars was properly modified and vinylized to immobilize a thiol-modified aptamer against Con A via straightforward ¿thiol-ene¿ click chemistry. The aptamer-functionalized stir bar was employed as SBSE sorbent to isolate Con A, and several parameters that can affect the extraction efficiency were investigated. Under the optimized conditions, Con A was extracted and desorbed during 30 and 45 min, respectively, at 25 °C and 600 rpm. The SBSE MALDI-TOF-MS method provided limits of detection of 0.5 ¿g mL¿1 for Con A. Furthermore, the SBSE coating was highly selective to Con A compared to other lectins. The developed method was successfully applied to the determination of low levels of Con A in several food matrices (i.e., white beans as well as chickpea, lentils, and wheat flours). Recoveries ranged from 81 to 97% with relative standard deviations below 7%. The aptamer-based stir bars presented suitable physical and chemical long-term stability (1 month) and a reusability of 10 and 5 extraction cycles with standards and food extracts, respectively. The developed aptamer-affinity extraction devices open up the possibility of developing novel highly selective SBSE coatings for the extraction of proteins and peptides from complex samples., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This study was funded by grants PID2021-125459OB-I00 and PID2021-127137OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe." Maria Vergara-Barberan thanks the Generalitat Valenciana for a VALi + D postdoctoral research contract (ref. APOSTD/2020/213).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of an aptamer-based sorbent in polypropylene tubes for bisphenol A extraction in water samples

  • Meseguer-Lloret, S.|||0000-0001-5726-032X
  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Gómez Benito, Carmen|||0000-0003-0964-6476
  • Simó-Alfonso, Ernesto Francisco
  • Herrero Martínez, José Manuel
[EN] Background: In this work, a novel, efficient and cost-effective aptamer-based sorbent is described for the first time, using a polypropylene (PP) tube as a support for the selective isolation and preconcentration of bisphenol A (BPA). To achieve this, the inner surface of the bottom of a commercial PP tube was vinylized to enable the immobilization of a thiol-modified aptamer against BPA using straightforward "thiol-ene" click chemistry. Results: The resulting aptamer-modified tube (Apt-MT) was properly characterized and used as sorbent, with key extraction parameters systematically optimized to achieve the best extraction efficiency of BPA. Studies on adsorption behaviour and selectivity of the Apt-based sorbent were also investigated. Under the optimized conditions, the oligosorbent, combined with HPLC with fluorescence detection, provided low detection limit (0.05 mu g L- 1) for BPA. The method was successfully applied to several environmental water samples from different sources, yielding recovery values between 83 and 93 % with relative standard deviations below 8.7 %. Moreover, the developed Apt-MT sorbent exhibited excellent reusability, keeping its extraction efficiency for at least 30 cycles. Significance: This study demonstrates the potential of an aptamer-functionalized PP tube as a practical and reusable sorbent for selective BPA isolation and preconcentration in environmental analysis, offering a costeffective and efficient alternative for contaminant monitoring., This study was supported by grant PID2021-125459OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Also, the authors acknowledge the project CIAICO/2022/183 funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Green synthesis of MIL53(Al)-modified paper-based analytical device for efficient extraction of neonicotinoid insecticides from environmental water samples

  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Gómez Benito, Carmen|||0000-0003-0964-6476
  • Martínez-Pérez-Cejuela, Héctor
  • Simó-Alfonso, Ernesto Francisco
  • Herrero Martínez, José Manuel
[EN] Background: There is a need to develop low-cost, reliable and portable devices to enhance the efficiency of microextraction techniques in complex samples. Metal-organic frameworks (MOFs) have proven to be promising sorbents due to their well-documented properties. However, their green preparation and combination with paper-based substrates have not been satisfactorily explored to fabricate sustainable sorptive phases. Results: In this work, the hybridization of a paper substrate (as a sustainable support) with MOFs (as a sorptive phase) was carried out by one-pot approach. Concretely, the selected MOF, MIL-53(Al), was in-situ growth onto the paper surface in aqueous solution without the need for high temperature or pressure, thereby aligning with the Green Analytical Chemistry principles. The optimized composite (MIL-53(Al)@cellulose paper) was characterized and evaluated as extraction sorbent for five neonicotinoids (NEOs) (thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid). Furthermore, its feasibility was demonstrated by isolating these pollutants from environmental water samples, followed their determination by HPLC coupled to diode array, This work was supported by projects PID2021-125459OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union. This research was also funded by the CIAICO/2022/183 grant from the Generalitat Valenciana.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

3D-printed pipette-tip device for the efficient extraction of opioids from oral fluids using particulate-coated adhesive tapes as sorptive phases

  • Millán-Santiago, Jaime
  • Calero-Cañuelo, Carlos
  • Carrasco-Correa, Enrique Javier
  • Casado-Carmona, Francisco Antonio
  • Lucena, Rafael
  • Miró, Manuel
  • Cárdenas, Soledad
[eng] Background: Integrating planar sorptive phases into pipette tips enables easier sample handling with disposable units, which is especially relevant in bioanalysis. However, the flat shape of these phases does not fit well with the tip’s geometry. Consequently, the majority of the sample does not come into contact with the sorbent, thus reducing the extraction efficiency. In such conditions, the samples need to be aspirated several times to accomplish an acceptable extraction efficiency of the target compounds. This shortcoming makes the extraction tedious and slow. Results: In this article, a new 3D-printed pipette tip was developed to enable full exposure of the planar sorptive phase to the sample. To prove the potential of this approach, the determination of opioids in oral fluids was selected as a case of study. With the new platform, the extraction of the analytes is enhanced by a factor ranging from 3.3 to 5.1 compared to using a commercial pipette tip. The analytical performance showed competitive sensitivity, permitting the determination of the drugs in saliva. The intra-day and inter-day precision at the limit of quantification, expressed as relative standard deviation, were always better than 10.8 % and 24.7 %, respectively. In addition, the trueness (relative recovery) ranged from 87 % to 115 % for all target compounds. Notably, the use of isotopically labeled surrogates as internal standards for each compound significantly improved the analytical results. Significance and novelty: This study deepens the potential of 3D printing for designing functional extraction devices. In this case, the extraction kinetics are positively affected by changing the geometry of the planar sorptive phase holder. The new design allows proper exposure of the sorptive material, a particle-coated adhesive tape, to the bulk sample.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

3D-printed pipette-tip device for the efficient extraction of opioids from oral fluids using particulate-coated adhesive tapes as sorptive phases

  • Millán-Santiago, Jaime
  • Calero-Cañuelo, Carlos
  • Carrasco-Correa, Enrique Javier
  • Casado-Carmona, Francisco Antonio
  • Lucena, Rafael
  • Miró, Manuel
  • Cárdenas, Soledad
Background Integrating planar sorptive phases into pipette tips enables easier sample handling with disposable units, which is especially relevant in bioanalysis. However, the flat shape of these phases does not fit well with the tip's geometry. Consequently, the majority of the sample does not come into contact with the sorbent, thus reducing the extraction efficiency. In such conditions, the samples need to be aspirated several times to accomplish an acceptable extraction efficiency of the target compounds. This shortcoming makes the extraction tedious and slow. Results In this article, a new 3D-printed pipette tip was developed to enable full exposure of the planar sorptive phase to the sample. To prove the potential of this approach, the determination of opioids in oral fluids was selected as a case of study. With the new platform, the extraction of the analytes is enhanced by a factor ranging from 3.3 to 5.1 compared to using a commercial pipette tip. The analytical performance showed competitive sensitivity, permitting the determination of the drugs in saliva. The intra-day and inter-day precision at the limit of quantification, expressed as relative standard deviation, were always better than 10.8 % and 24.7 %, respectively. In addition, the trueness (relative recovery) ranged from 87 % to 115 % for all target compounds. Notably, the use of isotopically labeled surrogates as internal standards for each compound significantly improved the analytical results. Significance and novelty This study deepens the potential of 3D printing for designing functional extraction devices. In this case, the extraction kinetics are positively affected by changing the geometry of the planar sorptive phase holder. The new design allows proper exposure of the sorptive material, a particle-coated adhesive tape, to the bulk sample.