Pasar al contenido principal

DESARROLLO DE MATERIALES POLIMERICOS FUNCIONALES EN PLATAFORMAS FLEXIBLES PARA APLICACIONES MEDIOAMBIENTALES Y TOXICOLOGICAS

RTI2018-095536-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aptamer-modified magnetic nanoparticles for extraction of atrazine in environmental water samples

  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Meseguer-Lloret, S.|||0000-0001-5726-032X
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Simó-Alfonso, Ernesto Francisco
  • Herrero Martínez, José Manuel
[EN] In this work, a novel aptamer magnetic sorbent was prepared and used as magnetic solid-phase extraction sorbent for selective isolation of atrazine (ATZ) in water samples. The magnetic oligosorbent was fabricated by immobilizing DNA aptamer onto the surface of vinylized magnetic nanoparticles (VMNPs) via ¿thiol-ene¿ click chemistry reaction. After optimization of different aptamer coupling parameters, the following experimental conditions were found to give best results: 100 mg VMNPs incubated with 1 ¿mol L¿1 thiol-modified aptamer for 5 h at 55 °C. The resulting oligosorbent was characterized by different instrumental techniques such as transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and inductively coupled plasma mass spectrometry (ICP-MS). Then, several parameters of the extraction protocol were investigated to achieve the best ATZ extraction performance. The optimized aptamer-based magnetic solid-phase extraction (Apt-MSPE) protocol followed by HPLC with diode-array detection gave detection and quantification limits for ATZ of 0.005 µg L¿1 and 0.018 µg L¿1, respectively. The applicability of this protocol was demonstrated by analyzing several environmental water samples from of different sources with recovery values from 85.5 to 94% and relative standard deviations less than 2.5%. Moreover, the developed Apt-MNPs sorbent could be re-used at least 12 times, without losses in its extraction capacity., This work was supported by projects RTI2018-095536-B-I00 and PID2021-125459OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation of monolithic polymer-magnetite nanoparticle composites into poly(ethylene-co-tetrafluoroethylene) tubes for uses in micro-bore HPLC separation and extraction of phosphorylated compounds

  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Meseguer-Lloret, S.|||0000-0001-5726-032X
  • Gómez Benito, Carmen|||0000-0003-0964-6476
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Simo-Alfonso, Ernesto F.
  • Herrero-Martínez, José Manuel
[EN] This paper describes the fabrication of a novel microbore monolithic column modified with magnetite nanoparticles (MNPs) prepared in a poly(ethylene-co-tetrafluoroethylene) (EFTE) tubing, and its application as stationary phase for the chromatographic separation of phosphorylated compounds. In order to obtain the composite column, a two-step procedure was performed. The formation of a glycidyl methacrylate-based monolith inside the activated ETFE tube was firstly carried out. Then, two incorporation approaches of MNPs in monoliths were investigated. The generic polymer was modified with 3-aminopropyltrimethoxysilane (APTMS) to be subsequently attached to MNP surfaces. Alternatively, APTMS-coated MNPs were firstly prepared and subsequently used for attachment onto the monolith surface through reaction of epoxy groups present in the generic monolith. This last strategy gave a reproducible layer of MNPs coated onto the polymer monolith as well as robust and permeable chromatographic columns. The retention behaviour of this MNP-based composite monolithic column was studied by using small phosphorylated compounds (adenosine phosphates). It was found that the retention of model analytes was ruled by partitioning and adsorption HILIC mechanisms. The columns also exhibited satisfactory performance in the separation of these target compounds, showing good chromatographic behaviour after two months of continued use. These composite monolithic columns were also successfully applied to the extraction of a tryptic digest of beta-casein., This work was supported by project RTI2018-095536-B-I00 (Ministry of Science, Innovation and Universities, Spain). The proteomic analysis was performed in the proteomics facility of SCSIE (University of Valencia) that belongs to ProteoRed, PRB2-ISCIII, supported by grant PT13/0001 (Instituto de Carlos III, Spain). The authors also thank Dr. Luz Valero-Rustarazo for her assistance in proteomic analysis and data treatment
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of benzomercaptans in environmental complex samples by combining zeolitic imidazolate framework-8-based solid-phase extraction and high-performance liquid chromatography with UV detection

  • Martinez-Perez-Cejuela, Hector
  • Mompo-Rosello, Oscar
  • Crespi-Sanchez, Neus
  • Palomino Cabello, Carlos
  • Simo-Alfonso, Ernesto F.
  • Herrero-Martinez, Jose Manuel
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
[EN] In this work, the synthesis of zeolitic imidazolate framework-8 (ZIF-8) crystals and their subsequent application as effective sorbents for extraction and preconcentration of several benzomercaptans from environmental complex samples is described. These materials were prepared by solvothermal approach varying the concentration of n-butylamine modulator to modify the surface of the metal-organic framework. The resulting materials were characterized by scanning and transmission electron microscopy, powder X-ray diffraction and Fourier transform infrared spectroscopy. The ZIF-8 material that gave the best features was selected as extractive phase and the influence of various parameters (sample pH and elution solvent composition, among others) on the extraction efficiency of target compounds were investigated. Under the optimal conditions of the method, the tested analytes (2-mercaptobenzothiazole, 2-mercaptobenzoxazole and 2-mercapto-6-nitrobenzothiazole) were retained and eluted quantitatively with alkaline 50:50 (v:v) methanol-water mixture. Using the proposed method, low limits of detection, in the range of 16-21 ng L-1 for aqueous samples and 0.4-0.5 mu g kg(-1) for soil samples, were achieved whereas the precision (expressed as relative standard deviation) was lower than 7%. The resulting solid-phase extraction protocol, using the zeolitic material as sorbent, was combined with liquid chromatography and ultraviolet-vis detector and successfully applied to determine traces of these organic pollutants in environmental samples. (C) 2020 Elsevier B.V. All rights reserved., The authors would like to gratefully acknowledge the financial support received from the project RTI2018-095536-B-I00 (Ministry of Science, Innovation and Universities, Spain). Spanish Agencia Estatal de Investigacion (AEI-Spain) and the European Funds for Regional Development (FEDER-European Union) are also gratefully acknowledged for financial support through Project CTQ2016-77155-R (AEI/FEDER, UE).). H. M. P-C. and N.C. thank the support from the Spanish Ministry of Science, Innovation and Universities (MCIU) for FPU pre-doctoral fellowships. The authors extend their appreciation to MCIU for granting the Spanish Network of Excellence in Sample preparation (RED2018-102522-T). This article is based upon work from the Sample Preparation Task Force and Network, supported by the Division of Analytical Chemistry of the European Chemical Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Weak anion-exchange mixed-mode materials to selectively extract acidic compounds by stir bar sorptive extraction from environmental waters

  • Nadal, Joan Carles
  • Borrull, Francesc
  • Herrero-Martínez, José Manuel
  • Marcé, Rosa Maria
  • Fontanals, Núria
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
[EN] In this study, the first example of a polytetrafluoroethylene (PTFE)-based magnet coated with weak anion exchange (WAX) monolith as novel support for stir bar sorptive extraction (SBSE) is presented. Firstly, the PTFE magnets were properly modified and vinylized in order to immobilize polymer monoliths onto its surface. Then, a glycidyl methacrylate monolith was prepared and modified with ethylenediamine (EDA) to create weak anion exchanger via ring opening reaction of epoxy groups. The prepared covalently immobilized EDA-modified monoliths onto PTFE magnet exhibited good stability and reusability. Application of resulting material as stir bar for SBSE was investigated for a series of acidic compounds that includes acesulfame, saccharin, diclofenac or ibuprofen, among others as target compounds. Firstly, the SBSE conditions were optimized to promote the WAX interactions with the target compounds achieving recoveries from 37 to 75% and enable the selective extraction of these compounds as it provided values of% matrix effect from 17 to -13% when they were determined by SBSE followed by liquid chromatography - tandem mass spectrometry. The analytical methodology, was then validated and applied for the determination of the target solutes in environmental water samples, which were found at concentration up to 2500 ng L¿1 in river waters, The authors would like to thank MCIN/AEI/10.23039/501100011033/and FEDER for financial support projects: CTQ2017-88548-P, RTI2018-095536-B-I00 and RED2018-102522-T. J.C. Nadal is also grateful to Universitat Rovira i Virgili (URV) for his PhD grant (2017PMF-PIPF-49). This article is based upon work from the Sample Preparation Task Force and Network, supported by the Division of Analytical Chemistry of the European Chemical Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetic molecularly imprinted polymer for the simultaneous selective extraction of phenoxy acid herbicides from environmental water samples

  • Meseguer-Lloret, S.|||0000-0001-5726-032X
  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Gómez Benito, Carmen|||0000-0003-0964-6476
  • Herrero-Martínez, José Manuel
[EN] A selective magnetic molecularly imprinted polymer (MMIP) was synthetized with 4-chloro-2-methylphenoxyacetic acid as template and 4-vinylpiridine as monomer in presence of vinylized magnetite nanoparticles. Scanning electron microscopy, nitrogen adsorption-desorption isotherms, Fourier transform infrared spectrometry and vibrating sample magnetometry were applied to characterize the resulting material. The synthesized MMIP was applied as sorbent in magnetic molecularly imprinted solid-phase extraction (MMISPE) for selective extraction of a mixture of the five herbicides 4-chloro-2-methylphenoxyacetic acid (MCPA), 4-(4-chloro-2-methylphenoxy)butyric acid (MCPB), mecoprop (MCPP), fenoxaprop (FEN) and haloxyfop (HAL). Several parameters affecting the extraction conditions were optimized to achieve the best extraction performance. The best MMISPE combined with HPLC-DAD gave detection and quantification limits between 0.33 and 0.71 ¿g/L and 1.1¿2.4 ¿g/L, respectively, were obtained. The precision of the whole method provided RSD values below 7.3%, and the accuracy was demonstrated by the analysis of several water samples of different origins, with recoveries ranged from 77 to 98%. Moreover, a remarkable re-usability of the MMIP sorbent, more than 65 uses without losses in extraction capacity, was obtained., This work was supported by project RTI2018-095536-B-I00 (Ministry of Science, Innovation and Universities, Spain) funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recent Advances in Molecularly Imprinted Membranes for Sample Treatment and Separation

  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Meseguer-Lloret, S.|||0000-0001-5726-032X
  • Simó-Alfonso, Ernesto F.
  • Herrero-Martínez, José Manuel
[EN] This review describes the recent advances from the past five years concerning the development and applications of molecularly imprinted membranes (MIMs) in the field of sample treatment and separation processes. After a short introduction, where the importance of these materials is highlighted, a description of key aspects of membrane separation followed by the strategies of preparation of these materials is described. The review continues with several analytical applications of these MIMs for sample preparation as well as for separation purposes covering pharmaceutical, food, and environmental areas. Finally, a discussion focused on possible future directions of these materials in extraction and separation field is also given., This work was supported by project RTI2018-095536-B-I00 (Ministry of Science, Innovation and Universities, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of photo-initiators in the preparation of methacrylate monoliths into poly(ethylene-co-tetrafluoroethylene) tubing for microbore HPLC

  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Simó-Alfonso, Ernesto F.
  • Herrero-Martínez, José Manuel
[EN] In this study, poly(butyl methacrylate-co-ethyleneglycol dimethacrylate) polymeric monoliths were in situ developed within 0.75 mm i.d. poly(ethylene-co-tetrafluoroethylene) (ETFE) tubing by UV polymerization via three different free-radical initiators fscce-azobisisobutyronitrile (AIBN), 2,2-dimethoxy-2-phenylacetophenone (DMPA) and 2-methyl-4'-(methylthio)-2-morpholinopropiophenone (MTMPP). The influence of the nature of each photo-initiator and irradiation time on the morphological features of the polymer was investigated by scanning electron microscopy, and the chromatographic properties of the resulting microbore columns were evaluated using alkyl benzenes as test substances. The beds photo-initiated with MTMPP gave the best performance (minimum plate heights of 38 mu m for alkyl benzenes) and exhibited a satisfactory reproducibility in the chromatographic parameters (RSD < 11%). These monolithic columns were also successfully applied to the separation of phenylurea herbicides, proteins and a tryptic digest of beta-casein. (C) 2019 Elsevier B.V. All rights reserved., This research study has been sponsored by projects PROMETEO/2016/145 (Conselleria d'Educacio, Investigacio, Cultura i Esport, Generalitat Valenciana, Spain) and RTI2018-095536-B-I00 (Ministry of Science, Innovation and Universities, Spain).
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Determination of benzomercaptans in environmental complex samples by combining zeolitic imidazolate framework-8-based solid-phase extraction and high-performance liquid chromatography with UV detection

  • Martínez Pérez-Cejuela, Héctor
  • Mompó Roselló, Óscar
  • Crespí Sánchez, Neus
  • Palomino Cabello, Carlos
  • Catalá Icardo, Mónica
  • Simó Alfonso, Ernesto F.
  • Herrero Martínez, José Manuel
[eng] In this work, the synthesis of zeolitic imidazolate framework-8 (ZIF-8) crystals and their subsequent application as effective sorbents for extraction and preconcentration of several benzomercaptans from environmental complex samples is described. These materials were prepared by solvothermal approach varying the concentration of n-butylamine modulator to modify the surface of the metal-organic frame- work. The resulting materials were characterized by scanning and transmission electron microscopy, pow- der X-ray diffraction and Fourier transform infrared spectroscopy. The ZIF-8 material that gave the best features was selected as extractive phase and the influence of various parameters (sample pH and elu- tion solvent composition, among others) on the extraction efficiency of target compounds were inves- tigated. Under the optimal conditions of the method, the tested analytes (2-mercaptobenzothiazole, 2- mercaptobenzoxazole and 2-mercapto-6-nitrobenzothiazole) were retained and eluted quantitatively with alkaline 50:50 (v:v) methanol-water mixture. Using the proposed method, low limits of detection, in the range of 16–21 ng L −1 for aqueous samples and 0.4–0.5 μg kg −1 for soil samples, were achieved whereas the precision (expressed as relative standard deviation) was lower than 7%. The resulting solid-phase ex- traction protocol, using the zeolitic material as sorbent, was combined with liquid chromatography and ultraviolet-vis detector and successfully applied to determine traces of these organic pollutants in envi- ronmental samples.