Pasar al contenido principal

MOF COMO CATALIZADORES HETEROGENEOS PARA REACIONES DE CICLOADICCION DE CO2

PID2020-116998RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tailoring Catalysts for CO2 Hydrogenation: Synthesis and Characterization of NH2–MIL–125 Frameworks

  • Figueroa-Quintero, Leidy
  • Cordero-Lanzac, Tomás
  • Ramos-Fernández, Enrique V.
  • Olsbye, Unni
  • Narciso, Javier
  • Figueroa-Quintero, Leidy|||/items/5b84398e-3f48-4408-b67e-855a243d11b9
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Copper nanoparticles have been integrated onto the framework of modified NH2–MIL–125(Ti), a metal–organic framework (MOF), and evaluated as catalysts for converting CO2 into valuable products. The modified MOF was achieved through a post-synthetic modification process involving the partial replacement of titanium with zirconium or cerium within the MOF’s structure. The objective behind this alteration is to create a synergistic effect between the MOF, serving as a support matrix, and the embedded copper nanoparticles, thereby enhancing the performance of the catalyst. The obtained catalysts were characterized and evaluated in the hydrogenation of CO2 to methanol under different experimental conditions, reaching CO2 conversions of up to 5%, with a selectivity towards methanol that reached values of up to 60%. According to the obtained results, the catalyst composed of Ti, Zr and Cu stood out for having the highest CO2 conversion and selectivity towards methanol, in addition to practically inhibiting the production of methane. These results demonstrate that the interaction of the framework with the Cu nanoparticles, and thus its catalytic properties, can be changed by modifying the properties of the MOF.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing Trace Metal Extraction from Wastewater: Magnetic Activated Carbon as a High-Performance Sorbent for Inductively Coupled Plasma Optical Emission Spectrometry Analysis

  • Abellán-Martín, Sergio J.
  • Villalgordo-Hernández, David
  • Aguirre Pastor, Miguel Ángel
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Canals, Antonio
  • Aguirre Pastor, Miguel Ángel|||/items/2ded3973-b197-4677-af9e-89db8c79363f
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
A new fast, sensitive, and environmentally friendly analytical method has been developed for the simultaneous determination of Ba, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn in wastewater samples using inductively coupled plasma optical emission spectroscopy (ICP OES). A preconcentration step using a magnetic dispersive solid-phase extraction (MDSPE) technique with a new magnetic sorbent was performed. The new sorbent material was a carbon containing magnetic cobalt and nitrogen groups. This material was synthetized using controlled pyrolysis of a zeolitic imidazolate framework (i.e., ZIF-67). In order to optimize the experimental parameters that affect the MDSPE procedure, a multivariate optimization strategy, using Plackett–Burman and circumscribed central composite designs (CCD), was used. The method has been evaluated employing optimized experimental conditions (i.e., sample weight, 10 g; sample pH, 7.6; amount of sorbent, 10 mg; dispersive agent, vortex; complexing agent concentration, 0.5%; ionic concentration, 0%; eluent, HCl; eluent concentration, 0.5 M; eluent volume, 300 μL; elution time, 3 min and extraction time, 3 min) using external calibration. Limits of detection (LODs) in a range from 0.073 to 1.3 μg L−1 were obtained, and the repeatability was evaluated at two different levels, resulting in relative standard deviations below 8% for both levels (n = 5). An increase in the sensitivity was observed due to the high enrichment factors (i.e., 3.2 to 13) obtained compared with direct ICP OES analysis. The method was also validated through carrying out recovery studies that employed a real wastewater sample and through the analysis of a certified reference material (ERM®-CA713). The recovery values obtained with the real wastewater were between 94 and 108% and between 90 and 109% for the analysis of ERM®-CA713, showing negligible matrix effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Post-synthetic ligand exchange as a route to improve the affinity of ZIF-67 towards CO2

  • Villalgordo-Hernández, David
  • Diaz-Perez, Manuel Antonio
  • Balloi, Valentina
  • Lara-Angulo, Mayra Anabel
  • Narciso, Javier
  • Serrano Ruiz, Juan Carlos
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
The Zeolitic Imidazolate Framework 67 (ZIF-67) is a highly promising material owing to its exceptional thermal stability, large specific surface area, cost-effectiveness, and versatile applications. One of the potential applications of ZIF-67 is gas separation processes, among which the separation of CO2/CH4 mixtures has attracted great interest nowadays in the biogas sector. However, when it comes to CO2/CH4 separation, ZIF-67 falls short as it lacks the desired selectivity despite its high adsorption capacity. This limitation arises from its relatively low affinity towards CO2. In this study, we have addressed this issue by partially exchanging the ligand of ZIF-67, specifically replacing 2-methylimidazole with 1,2,4 (1H) triazole, which introduces an additional nitrogen atom. This modification resulted in ZIF-67 showing significantly enhanced affinity towards CO2 and, as a result, greater selectivity towards CO2 over CH4. The modified materials underwent thorough characterization using various techniques, and their adsorption capacity was evaluated through high-pressure adsorption isotherms. Furthermore, their separation performance was assessed using the Ideal Solution Adsorption Theory, which provided valuable insights into their potential for efficient gas separation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of the Synthesis Conditions of MIL-100(Fe) on Its Catalytic Properties and Stability under Reaction Conditions

  • Delgado-Marín, José Javier
  • Narciso, Javier
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
MIL-100(Fe) is a metal–organic framework (MOF) characterized by the presence of Lewis acid and Fe(II/III) redox sites. In this work, different synthesis methods for the preparation of MIL-100(Fe) are studied. Depending on the source of fluorine, different phases can be obtained: MIL-100(Fe) and an Fe trimesate with unknown structure which we call Fe(BTC). These materials were characterized using numerous techniques and applied in the reaction of CO2 cycloaddition with epichlorohydrin, a reaction catalyzed by Lewis acid sites. It was observed that samples with more Fe(BTC) phase were more active in the reaction. However, all samples, under reaction conditions, transformed into a less active phase.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Post-Synthetic Surface Modification of Metal–Organic Frameworks and Their Potential Applications

  • Figueroa-Quintero, Leidy
  • Villalgordo-Hernández, David
  • Delgado-Marín, José Javier
  • Narciso, Javier
  • Velisoju, Vijay Kumar
  • Castaño, Pedro
  • Gascon, Jorge
  • Ramos-Fernández, Enrique V.
  • Figueroa-Quintero, Leidy|||/items/5b84398e-3f48-4408-b67e-855a243d11b9
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
Metal–organic frameworks (MOFs) are porous hybrid materials with countless potential applications. Most of these rely on their porous structure, tunable composition, and the possibility of incorporating and expanding their functions. Although functionalization of the inner surface of MOF crystals has received considerable attention in recent years, methods to functionalize selectively the outer crystal surface of MOFs are developed to a lesser extent, despite their importance. This article summarizes different types of post-synthetic modifications and possible applications of modified materials such as: catalysis, adsorption, drug delivery, mixed matrix membranes, and stabilization of porous liquids.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Transitioning from Methanol to Olefins (MTO) toward a Tandem CO2 Hydrogenation Process: On the Role and Fate of Heteroatoms (Mg, Si) in MAPO-18 Zeotypes

  • Cordero-Lanzac, Tomás
  • Capel Berdiell, Izar
  • Airi, Alessia
  • Chung, Sang-Ho
  • Mancuso, Jenna L.
  • Redekop, Evgeniy A.
  • Fabris, Claudia
  • Figueroa-Quintero, Leidy
  • Navarro de Miguel, Juan C.
  • Narciso, Javier
  • Ramos-Fernández, Enrique V.
  • Svelle, Stian
  • Speybroeck, Veronique Van
  • Ruiz Martínez, Javier
  • Bordiga, Silvia
  • Olsbye, Unni
  • Figueroa-Quintero, Leidy|||/items/5b84398e-3f48-4408-b67e-855a243d11b9
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
The tandem CO2 hydrogenation to hydrocarbons over mixed metal oxide/zeolite catalysts (OXZEO) is an efficient way of producing value-added hydrocarbons (platform chemicals and fuels) directly from CO2 via methanol intermediate in a single reactor. In this contribution, two MAPO-18 zeotypes (M = Mg, Si) were tested and their performance was compared under methanol-to-olefins (MTO) conditions (350 °C, PCH3OH = 0.04 bar, 6.5 gCH3OH h–1 g–1), methanol/CO/H2 cofeed conditions (350 °C, PCH3OH/PCO/PH2 = 1:7.3:21.7 bar, 2.5 gCH3OH h–1 g–1), and tandem CO2 hydrogenation-to-olefin conditions (350 °C, PCO2/PH2 = 7.5:22.5 bar, 1.4–12.0 gMAPO-18 h molCO2–1). In the latter case, the zeotypes were mixed with a fixed amount of ZnO:ZrO2 catalyst, well-known for the conversion of CO2/H2 to methanol. Focus was set on the methanol conversion activity, product selectivity, and performance stability with time-on-stream. In situ and ex situ Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), solid-state nuclear magnetic resonance (NMR), sorption experiments, and ab initio molecular dynamics (AIMD) calculations were performed to correlate material performance with material characteristics. The catalytic tests demonstrated the better performance of MgAPO-18 versus SAPO-18 at MTO conditions, the much superior performance of MgAPO-18 under methanol/CO/H2 cofeeds, and yet the increasingly similar performance of the two materials under tandem conditions upon increasing the zeotype-to-oxide ratio in the tandem catalyst bed. In situ FT-IR measurements coupled with AIMD calculations revealed differences in the MTO initiation mechanism between the two materials. SAPO-18 promoted initial CO2 formation, indicative of a formaldehyde-based decarboxylation mechanism, while CO and ketene were the main constituents of the initiation pool in MgAPO-18, suggesting a decarbonylation mechanism. Under tandem CO2 hydrogenation conditions, the presence of high water concentrations and low methanol partial pressure in the reaction medium led to lower, and increasingly similar, methanol turnover frequencies for the zeotypes. Despite both MAPO-18 zeotypes showing signs of activity loss upon storage due to the interaction of the sites with ambient humidity, they presented a remarkable stability after reaching steady state under tandem reaction conditions and after steaming and regeneration cycles at high temperatures. Water adsorption experiments at room temperature confirmed this observation. The faster activity loss observed in the Mg version is assigned to its harder Mg2+-ion character and the higher concentration of CHA defects in the AEI structure, identified by solid-state NMR and XRD. The low stability of a MgAPO-34 zeotype (CHA structure) upon storage corroborated the relationship between CHA defects and instability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon-Coated Urchin-Like Silica Nanospheres for Enhanced Photothermal Catalysis

  • Rendón-Patiño, Alejandra
  • Wang, Xinhuilan
  • Duran-Uribe, Stiven
  • Sepúlveda-Escribano, Antonio
  • Mateo, Diego
  • Ramos-Fernández, Enrique V.
  • Gason, Jorge
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Photo-thermal catalysis represents a promising strategy to improve the sustainability of chemical transformations by integrating light and heat into a single process. However, materials featuring excellent harvesting and utilization of solar energy are still needed. Here, we report a photo-thermal catalyst architecture based on carbon-coated urchin-like silica nanospheres (KCC-1) decorated with Ru nanoparticles that maximizes light absorption and heat confinement. The composite material exhibits outstanding catalytic activity towards photo-thermal ammonia decomposition and CO2 hydrogenation reactions, outperforming most traditional Ru-based thermal catalysts. The insulating nature of silica is hypothesized to help minimize heat loss via conduction, while its high surface area enables excellent metal dispersion. Additionally, the deposition of a carbon layer further enhances both photon absorption and light-to-heat conversion. Mechanistic experiments suggest the co-existence of thermal and non-thermal effects, with light playing a crucial role in facilitating the desorption of H2 and N2 from the surface of the catalyst. Overall, these results demonstrate that the rational design of catalysts combining effective heat insulators and broad light absorbers is crucial to optimizing catalytic performance in photo-thermal systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

New route for the synthesis of Co-MOF from metal substrates

  • Narciso, Javier
  • Ramos-Fernández, Enrique V.
  • Delgado-Marín, José Javier
  • Affolter, Christopher W.
  • Olsbye, Unni
  • Redekop, Evgeniy A.
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
The synthesis of MOFs (Metal Organic Frameworks) from reduced metal sources could provide an elegant approach for the recovery of metal waste or to produce MOF coatings on metal or metal alloy surfaces, but this process has not been studied in depth so far. The difficulty of such MOF synthesis lies in the fact that the metal in the MOF structure is oxidized, necessitating in situ metal oxidation during synthesis when starting from reduced metal sources. This can be achieved by various methods including acid etching of the metal. In this method, the metal can be dissolved and oxidized at the same time (pH ∼ <7) and the ligand can be deprotonated (pH ∼> 6) to react with the oxidized metal. We hypothesize that Co MOF can be prepared by this method, since the redox reactions of cobalt are possible in the same pH range in which many MOF linkers can be deprotonated. Therefore, the synthesis of two different Co MOFs using acid etching has been studied. The MOFs prepared (ZIF-67 and MOF-71) have shown the same properties as reference materials prepared from oxidized metal sources and have been studied in water-ethanol separation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The Role of Vacancies in a Ti2CTx MXene-Derived Catalyst for Butane Oxidative Dehydrogenation

  • Ronda-Lloret, Maria
  • Slot, Thierry K.
  • van Leest, Nicolaas P.
  • de Bruin, Bas
  • Sloof, Willem G.
  • Batyrev, Erdni
  • Sepúlveda-Escribano, Antonio
  • Ramos-Fernández, Enrique V.
  • Rothenberg, Gadi
  • Shiju, N. Raveendran
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
MXenes are a new family of 2D carbides or nitrides that have attracted attention due to their layered structure, tunable surface groups and high electrical conductivity. Here, we report for the first time that Ti 2 CT x MXene catalyses the selective oxidative dehydrogenation of n -butane to butenes and 1,3-butadiene. This catalyst showed higher intrinsic activity compared to commercial TiC and TiO 2 samples in terms of C 4 olefin formation rate. We propose that the stabilisation of structural vacancies and the change in composition (from a carbide to a mixed phase oxide) in the MXene causes its higher catalytic activity. These vacancies can lead to a higher concentration of unpaired electrons in the MXene-derived material, enhancing its nucleophilic properties and favouring the production of olefins.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Valorization of CO2 through the Synthesis of Cyclic Carbonates Catalyzed by ZIFs

  • Delgado-Marín, José Javier
  • Martín-García, Iris
  • Villalgordo-Hernández, David
  • Alonso, Francisco
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Alonso, Francisco|||/items/4fd923c6-c670-41a9-aaf2-df585aa61da7
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
One way to exploit CO2 is to use it as a feedstock for the production of cyclic carbonates via its reaction with organic epoxides. As far as we know, there is still no heterogeneous catalyst that accelerates the reaction in a selective, efficient and industrially usable way. Cobalt and zinc-based zeolitic imidazole frameworks (ZIFs) have been explored as heterogeneous catalysts for this reaction. In particular, we have prepared ZIF-8 and ZIF-67 catalysts, which have been modified by partial replacement of 2-methylimidazole by 1,2,4-triazole, in order to introduce uncoordinated nitrogen groups with the metal. The catalysts have shown very good catalytic performance, within the best of the heterogeneous catalysts tested in the cycloaddition of CO2 with epichlorohydrin. The catalytic activity is due ultimately to defects on the outer surface of the crystal, and varies in the order of ZIF-67-m > ZIF-67 > ZiF-8-m = ZIF-8. Notably, reactions take place under mild reaction conditions and without the use of co-catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis and Characterization of the Metal–Organic Framework CIM-80 for Organic Compounds Adsorption

  • Figueroa-Quintero, Leidy
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Figueroa-Quintero, Leidy|||/items/5b84398e-3f48-4408-b67e-855a243d11b9
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Metal–organic frameworks (MOF) are a new type of porous materials that have great potential for adsorption of voltaic organic compounds (VOCs). These types of materials composed of metal ions and organic ligands are easy to synthesize, have high surface areas, their surface chemistry can be adjusted to the desired application, and they can also have good chemical and thermal stability. Therefore, this work focuses on the synthesis of a highly hydrophobic MOF material called CIM-80, a porous material that is made up of the Al3+ cation and the mesaconate linker. This MOF has a B.E.T. of approximately 800 m2/g and has potential applications for the adsorption of hydrophobic organic compounds. However, its synthesis is expensive and very dirty. Therefore, we have studied the synthesis conditions necessary to achieve high synthesis yields (85%) and materials with high crystallinity and accessible porosity. To achieve these results, we have used urea as a mild deprotonation reagent and modulator as an alternative to NaOH, which is traditionally used for the synthesis of this MOF. Once the synthesis of this material was controlled, its adsorption/desorption behavior of water and organic compounds such as toluene, cyclohexane and m-xylene was studied by means of vapor adsorption isotherms. The results show the hydrophobic character of the material and the greater affinity the material has toward aliphatic compounds than toward aromatic ones, with toluene being the most adsorbed compound, followed by cyclohexane and m-xylene.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Manufacture of SiC: Effect of Carbon Precursor

  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
SiC is one of the most important ceramics at present due to its excellent properties and wide range of applications. The industrial production method, known as the Acheson method, has not changed in 125 years. Because the synthesis method in the laboratory is completely different, laboratory optimisation may not be extrapolated to the industrial level. In the present study, the results at the industrial level and at the laboratory level of the synthesis of SiC are compared. These results show that it is necessary to make a more detailed analysis of the coke than the traditional one; therefore, the Optical Texture Index (OTI) should be included, as well as the analysis of the metals that form the ashes. It has been found that the main influencing factors are OTI and the presence of Fe and Ni in the ashes. It has been determined that the higher the OTI, as well as the Fe and Ni content, the better the results obtained. Therefore, the use of regular coke is recommended in the industrial synthesis of SiC.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Microwave-assisted synthesis of CoxP@C catalysts: Application to the hydrogenation of 1-chloro-4-nitrobezene

  • Duran-Uribe, Edgar S.
  • Sepúlveda-Escribano, Antonio
  • Ramos-Fernández, Enrique V.
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Transition metal phosphides (TMP) have gained great interest as catalysts for hydrogenation reactions due to their physical and chemical properties. Among these reactions, the hydrogenation of nitroarenes to the corresponding anilines is of great industrial importance, as these compounds are precursors of high value-added chemicals. In this work, we present the microwave-assisted synthesis of cobalt phosphide nanoparticles supported on carbon, and its application in the hydrogenation of 1-chloro-4-nitrobenzene. The catalysts were characterised by transmission electron microscopy (TEM), temperature-programmed reduction (TPR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and N2 adsorption at −196 °C. It could be observed that the catalytic activity depends on the reduction temperature, since it determines the crystalline phase of the phosphide. Thus, we found that the most active phase for the hydrogenation of 1-chloro-4-nitrobenzene corresponds to a phosphorus-rich cobalt phosphide obtained at low reduction temperatures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly N2-Selective Activated Carbon-Supported Pt-In Catalysts for the Reduction of Nitrites in Water

  • Soares, Olívia Salomé G.P.
  • Jardim, Erika de Oliveira
  • Ramos-Fernández, Enrique V.
  • Villora-Picó, Juan José
  • Pastor-Blas, M. Mercedes
  • Silvestre-Albero, Joaquín
  • Órfão, José J.M.
  • Pereira, Manuel Fernando R.
  • Sepúlveda-Escribano, Antonio
  • Pastor-Blas, M. Mercedes|||/items/26967561-b753-4471-b615-ceb0537ec40b
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
The catalytic reduction of nitrites over Pt-In catalysts supported on activated carbon has been studied in a semi-batch reactor, at room temperature and atmospheric pressure, and using hydrogen as the reducing agent. The influence of the indium content on the activity and selectivity was evaluated. Monometallic Pt catalysts are very active for nitrite reduction, but the addition of up to 1 wt% of indium significantly increases the nitrogen selectivity from 0 to 96%. The decrease in the accessible noble metal surface area reduces the amount of hydrogen available at the catalyst surface, this favoring the combination of nitrogen-containing intermediate molecules to promote the formation of N2 instead of being deeply hydrogenated into NH4+. Several activated carbon-supported Pt-In catalysts, activated under different calcination and reduction temperatures, have been also evaluated in nitrite reduction. The catalyst calcined and reduced at 400°C showed the best performance considering both the activity and the selectivity to nitrogen. This enhanced selectivity is ascribed to the formation of Pt-In alloy. The electronic properties of Pt change upon alloy formation, as it is demonstrated by XPS.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photothermal Catalysts, Light and Heat Management: From Materials Design to Performance Evaluation

  • Ramos-Fernández, Enrique V.
  • Rendón-Patiño, Alejandra
  • Mateo, Diego
  • Wang, Xinhuilan
  • Dally, Pia
  • Cui, Mengmeng
  • Castaño, Pedro
  • Gascon, Jorge
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Photothermal catalysis, a frontier in heterogeneous catalysis, combines light-driven and thermally enhanced chemical reactions to optimize energy use and reaction efficiencies at catalytic active sites. By leveraging photothermal conversion, this approach links renewable energy sources with industrial chemical processes, offering significant potential for sustainable applications. This review categorizes photothermal catalysis into three types: light-driven thermocatalysis, thermally enhanced photocatalysis, and photo-thermo coupling catalysis. Each category is analyzed, emphasizing mechanisms, performance factors, and the role of advanced materials such as plasmonic nanoparticles, semiconductors, and hybrid composites in enhancing light absorption, thermal distribution, and catalytic stability. Key challenges include achieving uniform thermal and photonic energy distributions within catalytic reactors and developing accurate performance evaluation metrics. Applications such as CO₂ reduction, ammonia synthesis, and plastic upcycling highlight the environmental and industrial relevance of this technology. The review identifies limitations and suggests innovations in materials design and energy-storing mechanisms to enable continuous catalytic processes. Future directions emphasize photothermal catalysis's potential to transform sustainable energy systems and advance green chemical production. This synthesis aims to guide research and foster practical adoption of photothermal technologies at an industrial scale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly Dispersed Pd@ZIF-8 for Photo-Assisted Cross-Couplings and CO2 to Methanol: Activity and Selectivity Insights

  • Velisoju, Vijay Kumar
  • Ramos-Fernández, Enrique V.
  • Kancherla, Rajesh
  • Ahmad, Rafia
  • Pal, Kuntal
  • Mohamed, Hend Omar
  • Cerrillo, Jose L.
  • Meijerink, Mark
  • Cavallo, Luigi
  • Rueping, Magnus
  • Castaño, Pedro
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Our study unveils a pioneering methodology that effectively distributes Pd species within a zeolitic imidazolate framework-8 (ZIF-8). We demonstrate that Pd can be encapsulated within ZIF-8 as atomically dispersed Pd species that function as an excited-state transition metal catalyst for promoting carbon–carbon (C–C) cross-couplings at room temperature using visible light as the driving force. Furthermore, the same material can be reduced at 250 °C, forming Pd metal nanoparticles encapsulated in ZIF-8. This catalyst shows high rates and selectivity for carbon dioxide hydrogenation to methanol under industrially relevant conditions (250 °C, 50 bar): 7.46 molmethanol molmetal−1 h−1 and >99%. Our results demonstrate the correlations of the catalyst structure with the performances at experimental and theoretical levels.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

3D-printed brass monoliths for ZIF-8 synthesis and CO2 conversion: A novel approach using selective laser melting

  • Figueroa-Quintero, Leidy
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Figueroa-Quintero, Leidy|||/items/5b84398e-3f48-4408-b67e-855a243d11b9
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
This study explores the synthesis and characterization of ZIF-8/brass composites using brass monoliths fabricated via Selective Laser Melting (SLM). Mechanical tests on the 3D-printed brass pieces demonstrated their suitability as substrates for catalytic applications. The ZIF-8/brass composites, prepared as a preliminary step toward scaling to monoliths, were extensively characterized to confirm the successful formation of ZIF-8 and to evaluate their thermal, physicochemical, and catalytic properties. Catalytic tests for CO₂ cycloaddition with epichlorohydrin achieved a 90% conversion in just 4 hours, underscoring the high efficiency of the composites. Compared to powdered MOFs, the ZIF-8/brass composites exhibited enhanced handling, stability, and performance, paving the way for scalable CO₂ valorization processes. This work highlights the potential of integrating MOFs with 3D-engineered metallic substrates for advanced industrial applications in environmental catalysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Leaching in Specific Facets of ZIF-67 and ZIF-L Zeolitic Imidazolate Frameworks During the CO2 Cycloaddition with Epichlorohydrin

  • Delgado-Marín, José Javier
  • Rendón-Patiño, Alejandra
  • Velisoju, Vijay Kumar
  • Kumar, Gadde Sathish
  • Zambrano, Naydu
  • Rueping, Magnus
  • Gascon, Jorge
  • Castaño, Pedro
  • Narciso, Javier
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Zeolitic imidazolate frameworks (ZIFs) have been profusely used as catalysts for inserting CO2 into organic epoxides (i.e., epichlorohydrin) through cycloaddition. Here, we demonstrate that these materials suffer from irreversible degradation by leaching. To prove this, we performed the reactions and analyzed the final reaction mixtures by elemental analysis and the resulting materials by different microscopies. We found that the difference in catalytic activity between three ZIF-67 and one ZIF-L catalysts was related to the rate at which the materials degraded. Particularly, the {100} facet leaches faster than the others, regardless of the material used. The catalytic activity strongly depended on the amount of leached elements in the liquid phase since these species are extremely active. Our work points to the instability of these materials under relevant reaction conditions and the necessity of additional treatments to improve their stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis of Zeolitic Imidazolate Framework 67 thin film coatings on cobalt discs

  • Delgado-Marín, José Javier
  • Montilla, Francisco
  • Narciso, Javier
  • Ramos-Fernández, Enrique V.
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Metal-Organic Frameworks (MOFs), and specifically Zeolitic Imidazolate Frameworks (ZIFs), have emerged as promising materials in cutting-edge applications such as gas separation, energy storage, and catalysis, due to their tunable porosity and high surface area. Among these, ZIF-67, composed of cobalt ions and 2-methylimidazolate, stands out for its chemical and structural stability. However, the synthesis of ZIF-67 thin films has faced significant challenges that limit their practical application. This work introduces a technique for depositing ZIF-67 thin films on cobalt discs by immersing them in an aqueous solution of 2-methylimidazole with carefully adjusted pH levels. Our methodology not only simplifies the synthesis process but also opens alternative avenues for the efficient and cost-effective fabrication of thin-film monoliths and other devices. This research represents a significant advance in the synthesis of MOFs, demonstrating the potential of ZIF-67 in industrial and technological applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

New Generation of MOF-Monoliths Based on Metal Foams

  • Delgado-Marín, José Javier
  • Izan, Dennis P.
  • Molina Sabio, Miguel
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Herein, it has been developed a method to prepare metallic foams starting from Zamak5 (ZnAlCu alloy) with different pore sizes. The Zamak5 metallic foam is designed to serve as a support and metallic precursor of ZIF-8. In this way, composite materials MOF-metal can be prepared, these composites have a large number of application in energy exchange processe such as: adsorption or chemical reactions. Additionally, this method of sythesizing MOFs is environmentally friendly thanks to absence of solvents. Hanerssing the low melting point of the linker, the linker is infiltrated into the foam where the foam and the linker react to form the ZIF-8. In this way we have managed to transform part of the foam into ZIF-8 crystals that remain adhered to the foam. The foams have been characterized and modeled studying the mechanical and electrical properties, finding that both can be predected by various models. Among these, Ashby and Mortensen models for mechanical properties and Ashby and Percolation model for electrical properties stand.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Manufacture of Carbon Materials with High Nitrogen Content

  • Villalgordo-Hernández, David
  • Grau-Atienza, Aida
  • García-Marín, Antonio A.
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Grau-Atienza, Aida|||/items/c4516fa7-6035-4389-9725-5908c8fa92ae
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
Nowadays one of the biggest challenges for carbon materials is their use in CO2 capture and their use as electrocatalysts in the oxygen reduction reaction (ORR). In both cases, it is necessary to dope the carbon with nitrogen species. Conventional methods to prepare nitrogen doped carbons such as melamine carbonization or NH3 treatment generate nitrogen doped carbons with insufficient nitrogen content. In the present research, a series of activated carbons derived from MOFs (ZIF-8, ZIF-67) are presented. Activated carbons have been prepared in a single step, by pyrolysis of the MOF in an inert atmosphere, between 600 and 1000 °C. The carbons have a nitrogen content up to 20 at.% and a surface area up to 1000 m2/g. The presence of this nitrogen as pyridine or pyrrolic groups, and as quaternary nitrogen are responsible for the great adsorption capacity of CO2, especially the first two. The presence of Zn and Co generates very different carbonaceous structures. Zn generates a greater porosity development, which makes the doped carbons ideal for CO2 capture. Co generates more graphitized doped carbons, which make them suitable for their use in electrochemistry.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ruthenium Nanoparticles within Carbon Spheres for Efficient Ammonia Decomposition

  • Rendón-Patiño, Alejandra
  • Mateo, Diego
  • Duran-Uribe, Edgar S.
  • Sepúlveda-Escribano, Antonio
  • Gascon, Jorge
  • Ramos-Fernández, Enrique V.
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
The one step hydrothermal synthesis of encapsulated ruthenium nanoparticles on carbon results in solids displaying high potential in photo-thermal catalysis. The integration of ruthenium into the carbon matrix has a twofold effect: (i) enhanced stability through prevention of metal sintering and oxidation and (ii) improved photothermal response. As a result, high efficiencies are achieved in the photo-thermal decomposition of ammonia.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Desarrollo de materiales tipo MOF para captura y valorización de contaminantes atmosféricos

  • Figueroa-Quintero, Leidy
  • Figueroa-Quintero, Leidy|||/items/5b84398e-3f48-4408-b67e-855a243d11b9
La Tesis Doctoral se centra en el desarrollo y optimización de materiales metalorgánicos (MOFs) para aplicaciones en la captura y conversión de gases de efecto invernadero, con un enfoque específico en la adsorción de compuestos orgánicos volátiles (VOCs) y la valorización de CO₂. Los objetivos principales incluyen la síntesis y caracterización de MOFs como CIM-80, optimizando su capacidad de adsorción de VOCs, así como el diseño de nuevos materiales con ligandos mixtos para mejorar la afinidad hacia CO₂. Además, se investiga el desarrollo de catalizadores bimetálicos basados en NH₂-MIL-125 para la conversión de CO₂ a metanol. Otro objetivo importante es la fabricación de monolitos de latón mediante Selective Laser Melting (SLM), sobre los cuales se sintetiza ZIF-8 para evaluar su actividad catalítica en la cicloadición de CO₂ con epóxidos. Esta investigación tiene como fin mejorar la eficiencia de los MOFs en aplicaciones industriales, contribuyendo a soluciones sostenibles en la mitigación de contaminantes atmosféricos y la valorización de CO₂. A lo largo de la tesis, se presentan avances significativos en la optimización de propiedades estructurales y funcionales de los MOFs, destacando su potencial para el almacenamiento de gases y la mejora de procesos catalíticos para la conversión de CO₂.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hierarchical Assembly of a Micro- and Macroporous Hydrogen-Bonded Organic Framework with Tailored Single-Crystal Size

  • Halliwell, Christopher A.
  • Dann, Sandra E.
  • Ferrando-Soria, Jesús
  • Plasser, Felix
  • Yendall, Keith
  • Ramos-Fernández, Enrique V.
  • Vladisavljević, Goran T.
  • Elsegood, Mark R.J.
  • Fernandez, Antonio
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Porous organic molecular materials represent an emergent field of research in Chemistry and Materials Science due to their unique combination of properties. To enhance their performance and expand the number of applications, the incorporation of hierarchical porosity is required, as exclusive microporosity entails several limitations. However, the integration of macropores in porous organic molecular materials is still an outstanding challenge. Herein, we report the first example of a hydrogen-bonded organic framework (MM-TPY) with hierarchical skeletal morphology, containing stable micro- and macroporosity. The crystal size, from micro to centimetre scale, can be controlled in a single step without using additives or templates. The mechanism of assembly during the crystal formation is compatible with a skeletal crystal growth. As proof of concept, we employed the hierarchical porosity as a platform for the dual, sequential and selective co-recognition of molecular species and microparticles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surface chemistry engineering via phytic acid doping: Tailoring activated carbons for selective catalysis

  • Duran-Uribe, Edgar S.
  • Villora-Picó, Juan José
  • Sepúlveda-Escribano, Antonio
  • Ramos-Fernández, Enrique V.
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Phytic acid (PA) is a renewable and efficient phosphorus precursor for synthesizing P-doped activated carbons, offering advantages such as ease of handling and the ability to introduce defined surface functionalities. However, the role of PA as a direct dopant and the influence of synthesis parameters on the resulting materials' structure and performance have not been sufficiently explored. In this study, a commercial porous carbon (RGC-30) was doped with PA using a strategy that combines mild pre-treatment and pyrolysis at temperatures ranging from 650 to 950 °C. Comprehensive characterization reveals that phosphorus speciation is highly dependent on synthesis conditions. Oxidized P groups form at lower temperatures, while pre-treatment combined with higher pyrolysis temperatures favors reduced species such as C3PO and C3P. Catalytic testing in two model reactions—benzyl alcohol oxidation and hydrogenation of 1-chloro-4-nitrobenzene—demonstrates that C3PO groups are highly active and stable in oxidation, while C3P species enhance hydrogenation activity but gradually convert into C3PO over time. These findings highlight the tunability of PA-derived P-doped carbons and establish a clear structure–activity relationship, where surface speciation, rather than total P content, governs catalytic behavior. This work positions phytic acid as a green and scalable dopant for designing robust, metal-free catalysts for selective transformations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Reactive Infiltration: Effects of Different Parameters

  • López-González, M. Karla
  • Figueroa-Quintero, Leidy
  • Villalgordo-Hernández, David
  • Ramos-Fernández, Enrique V.
  • Narciso, Javier
  • Figueroa-Quintero, Leidy|||/items/5b84398e-3f48-4408-b67e-855a243d11b9
  • López-González, M. Karla|||/items/79f54a24-58df-46fc-840b-92a5b953d966
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Villalgordo-Hernández, David|||/items/356641c4-769e-43d3-b590-1bb507bc792f
Currently, the production of complex SiC and SiC/SiC parts through reactive infiltration is one of the most widely used technologies, due to its versatility and cost-effectiveness compared to more conventional technologies such as Hot Isostatic Pressing (HIP). This technology, while widely adopted, still faces some debate regarding the mechanisms of infiltration. Questions persist about what determines how infiltration occurs and whether the process is governed by physics (flow dynamics) or chemistry (reactions at the triple line (LT: (contact line between the solid, liquid and gas phases)). The present work provides new strong/consistent proof that reactive infiltration is mainly controlled by chemical reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unlocking catalytic potential: Harnessing the power of oxidized active carbons for the hydrogenation of 1-chloro-4-nitrobenzene

  • Duran-Uribe, Edgar S.
  • Sepúlveda-Escribano, Antonio
  • Ramos-Fernández, Enrique V.
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
This study explores the effects of liquid-phase and gas-phase oxidation treatments on a low-ash activated carbon (RGC30) and its subsequent use as a metal-free catalyst for the hydrogenation of 1-chloro-4-nitrobenzene. Characterisation of the catalysts was accomplished through N2 and CO2 adsorption at −196 °C and 0 °C, respectively, together with techniques like X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, thermogravimetric analysis (TGA) and temperature-programmed desorption (TPD). In particular, it is observed that the catalytic activity depends on the specific oxidation treatment applied, which leads to the generation of different oxygenated groups on the carbon surface. Consequently, through precise control of oxygen groups via thermal treatment under inert conditions, it is found that the most influential groups for the hydrogenation of 1-chloro-4-nitrobenzene are basic groups incorporating Cdouble bondO bonds, such as quinones and carbonyls. Furthermore, certain groups, like phenols, exhibit a detrimental impact on the catalytic activity.