Pasar al contenido principal

MATERIALES BASADOS EN CARBONES DOPADOS PARA PURIFICACION Y SEPARAION DE BIO-GAS Y VALORIZACION DE CO2

PID2022-142960OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

LiCl@AC Composites for Atmospheric Water Harvesting: Effect of the Salt Content

  • Segovia-Sandoval, Sonia Judith
  • García Ripoll, Antonio
  • Farrando Pérez, Judit
  • Abreu-Jaureguí, Coset
  • Silvestre-Albero, Joaquín
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Segovia-Sandoval, Sonia Judith|||/items/cd3adb93-2b9d-440c-a69e-67e475e63b27
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
Freshwater scarcity is a major global challenge threatening human well-being. Sorption-based atmospheric water harvesting using composites of porous materials and hygroscopic salts, offers a promising solution. In this study, activated carbon (AC) with a well-developed porous structure was impregnated with different loadings of LiCl to enhance its water sorption capacity. The resulting LiCl@AC composites were characterized in terms of their morphological, thermal, physicochemical, and textural properties, and their water sorption performance was evaluated under various relative humidity (RH) conditions and cycling tests. The composite containing 30 wt % LiCl (30LiCl@AC) exhibited the highest water uptake (0.48 g/g at 60% RH and 25 °C), approximately 4 times greater than pristine AC. This enhancement is attributed to the synergistic interaction between the hydrophilic LiCl and the hydrophobic AC surface. Adsorption–desorption cyclability tests revealed that the minimum regeneration temperature is 80 °C.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of nitrogen doping on the surface properties of metal-free CMK-3 mesoporous carbons for catalytic and electrochemical applications

  • Baranska, Katarzyna
  • Debosz, Marek
  • Porada, Radosław
  • Rokicińska, Anna
  • Żurowska, Magdalena
  • Abreu-Jaureguí, Coset
  • Silvestre-Albero, Joaquín
  • Lindenbeck, Lucie
  • Slabon, Adam
  • Klepel, Olaf
  • Kuśtrowski, Piotr
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Nitrogen doping is a common strategy for improving the performance of carbon materials, but the specific role of N-containing functionalities often remains unclear owing to the interplay of multiple factors governing their behavior. In this study, model mesoporous CMK-3 carbons synthesized by nanoreplication of SBA-15 silica were used as a platform ensuring consistent porosity and degree of graphitization, while varying the content of N- and O-containing functional groups. CMK-3 replicas were prepared using sucrose and urea (at N/C ratios of 0, 0.14, and 0.51) and carbonized at 600–900 °C. With growing thermal treatment temperature, a slight increase in textural parameters, particularly microporosity, was observed. However, N species incorporation hindered this effect. Thermal analysis, Raman spectroscopy, XRD, elemental analysis, XPS, SEM-EDS and TEM studies confirmed a pronounced effect of higher carbonization temperature on the progressive ordering of graphitic domains and decomposition of N-containing functionalities with a preferential transformation of pyridinic groups into graphitic N species. No analogous trend was observed for O-containing functionalities, whose presence may originate both from precursor decomposition during carbonization and from post-synthetic surface oxidation upon exposure of the carbon surface to atmospheric air. As demonstrated by immersion calorimetry measurements, the presence of heteroatoms contributed to a reduction in hydrophobicity index, facilitating transport of polar molecules into the interior of material pores. Consequently, in catalytic oxidation of H2SO3 in aqueous solution, superior performance was achieved for carbons with a higher degree of ordering of graphitic domains and containing nitrogen species that improve electronic properties of the carbon framework, as confirmed by CV and EIS.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Controlling nitrogen doping and micropore development in biomass-derived carbons via in situ and ex situ hydrothermal co-carbonisation and phosphoric acid activation

  • Pina, A.C.
  • Cruz Jr., Orlando F.
  • Silvestre-Albero, Joaquín
  • Casco, Mirian Elizabeth
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
This work elucidates how the timing of phosphoric acid incorporation governs the interplay between nitrogen doping and micropore development in biomass-derived carbons obtained via hydrothermal co-carbonisation of olive stone and sheep wool. By systematically comparing in situ and ex situ activation routes, the study demonstrates that the stage of acid incorporation determines the reaction pathways available during hydrothermal co-carbonisation: in the in situ route, H₃PO₄ catalyses condensation reactions between amine and carbonyl groups — including Schiff base formation and Maillard- and Mannich-type pathways — thereby governing the extent of nitrogen–carbon bond formation and the subsequent development of micropore architecture during thermal activation. This route yields carbons with a high specific surface area (952 m² g⁻¹) and enhanced nitrogen incorporation (up to 2.25 wt% in bulk and 3.4 at% on the surface), while preserving a well-developed microporous structure. In contrast, increasing nitrogen content leads to a progressive loss of microporosity, revealing a trade-off between heteroatom incorporation and pore development. Pore size distribution analysis shows that ultramicropores (<0.7 nm) account for ∼41% of the total pore volume in the in situ sample, compared to ∼22% for the ex situ counterpart, indicating a more efficient development of narrow micropores. XPS analysis further reveals a redistribution of nitrogen functionalities, with partial transformation of pyrrolic species into more stable pyridinic and graphitic configurations. Overall, the in situ introduction of phosphoric acid enables a more effective balance between nitrogen doping and micropore development, providing insights into the rational design of biomass-derived functional carbons.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

UiO-66-NH2 crystals grown on nitrogen-doped hierarchical porous carbon monoliths (HPCM) for CO2 capture

  • Almasi, Miroslav
  • Zelenka, Tomáš
  • Kořená, Lucie
  • Zelenková, Gabriela
  • Řimnáčová, Daniela
  • Girman, Girman
  • Diko, Pavel
  • Kovaľ, Karol
  • Bednarčík, Jozef
  • Sowa, Katarzyna
  • Kołodziej, Tomasz
  • Korecki, Paweł
  • Petruš, Ondrej
  • Hakala, Branislav Viliam
  • Želinská, Milica
  • Kinnertová, Eva
  • Slovák, Václav
  • Yang, Minghui
  • Silvestre-Albero, Joaquín
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
This study focuses on the synthesis and characterization of novel UiO-66-NH2@HPCM-N composites, where hierarchically porous carbon monoliths with nitrogen-functionalized surfaces (HPCM-N) serve as a porous support for Metal-Organic Framework (MOF) UiO-66-NH2. Three nitrogen functionalization strategies – nitration-reduction, melamine treatment, and oxidation-amination – were applied to HPCM to possibly enhance CO2 adsorption performance. Structural, chemical, and textural properties were thoroughly analyzed (including synchrotron radiography measurements), confirming successful nitrogen incorporation, with the melamine-treated HPCM achieving the highest nitrogen content (17.3 wt%). The composites retained the crystalline structure of UiO-66-NH2 and its uniform distribution within the porous carbon matrix. The UiO-66-NH2 loading ranged from 14 to 30 wt%, and the materials exhibited well-developed textural properties. Among the tested modified materials, melamine-treated HPCM exhibited the highest CO2 adsorption capacity at 6 kPa (0.90 mmol g−1 at 0 °C) and 100 kPa (2.56 mmol g−1 at 0 °C), demonstrating strong synergistic effects. High-pressure adsorption at 30 °C and 1000 kPa revealed that UiO-66-NH2@HPCM and UiO-66-NH2@HPCM-melamine composites achieved CO2 uptakes of 3.05 mmol g−1 and 2.82 mmol g−1, respectively, surpassing the 2.52 mmol g−1 capacity of HPCM. In addition, UiO-66-NH2@HPCM showed excellent cyclic stability over 10 consecutive high-pressure CO2 adsorption-desorption cycles at 30 °C, with complete retention of adsorption capacity and preserved thermal and structural stability. These results highlight their potential as CO2 capture materials for both low- and high-pressure applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing graphitization and mesoporosity by cobalt in activated carbons obtained from peach stone

  • Campello-Gómez, Ignacio
  • Cruz Jr., Orlando F.
  • Rambo, Carlos R.
  • Ramos-Fernández, Enrique V.
  • Sepúlveda-Escribano, Antonio
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Activated carbon (AC) is a common material of choice in catalysis, as it is a suitable support material for many catalytic reactions. In this work, the effect of cobalt nanoparticles on activated carbon derived from a biomass waste, peach stone, is reported. The presence of cobalt during heat treatments at 900 °C under reductive (H2) and inert (He) atmospheres resulted in the appearance of an intense 2D band in the Raman spectra, indicating a high degree of graphitization. Temperature-programmed reduction and desorption experiments were conducted to evaluate the activation reactions. Quenched solid density functional theory (QSDFT) analysis using N2 adsorption data revealed that cobalt increased pore development in the samples, regardless of the atmosphere (reductive or inert) used.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Gas Adsorption Snapshots in Metal–Organic Frameworks Unveil the Impact of Pore Geometry on Hydrogen Storage

  • Chiu, Nan Chieh
  • Gładysiak, Andrzej
  • Yadav, Ankit K.
  • Abreu-Jaureguí, Coset
  • Manjón-Sanz, Alicia
  • Li, Cheng
  • Huang, Hongliang
  • Silvestre-Albero, Joaquín
  • Stylianou, Kyriakos C.
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Metal–organic frameworks (MOFs) are promising candidates for hydrogen (H2) storage. However, effective H2 storage in MOFs is challenging, because of weak adsorbent–adsorbate interactions. Optimizing the pore volume, size, and functionality in porous MOFs is crucial, but it is still unclear how to maximize H2 storage capacity while minimizing loading pressure. Herein, we investigate Al-TBAPy (H4TBAPy: 1,3,6,8-tetrakis(p-benzoic acid)pyrene), a low-density MOF, for H2 storage. Al-TBAPy features three interconnected pores (A–C), possesses a pore volume of 0.51 cm3/g, and demonstrates a H2 uptake of 22.5 mmol/g at 77 K and 100 bar. In situ deuterium (D2) gas loading neutron diffraction experiments reveal molecular-level insights into pore filling. Pores B and C exhibit high H2 affinity, while pore A, with a larger volume, takes up more H2 molecules. The collective properties of all pores and their interconnection result in a high deliverable gravimetric H2 capacity of 4.3 wt % under combined temperature and pressure swing conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fluorinated Nanosized Zeolitic-Imidazolate Frameworks as Potential Devices for Mechanical Energy Storage

  • Amayuelas, Eder
  • Farrando Pérez, Judit
  • Missyul, Alexander
  • Grosu, Yaroslav
  • Silvestre-Albero, Joaquín
  • Carrillo-Carrión, Carolina
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
Fluorination is one of the most efficient and universal strategies to increase the hydrophobicity of materials and consequently their water stability. Zeolitic-imidazolate frameworks (ZIFs), which have limited stability in aqueous media and even lower stability when synthesized on a nanometric scale, can greatly benefit from the incorporation of fluorine atoms, not only to improve their stability but also to provide additional properties. Herein, we report the preparation of two different fluorinated ZIFs through a simple and scalable approach by using mixed ligands [2-methylimidazole, as a common ligand, and 4-(4-fluorophenyl)-1H-imidazole (monofluorinated linker) or 2-methyl-5-(trifluoromethyl)-1H-imidazole (trifluorinated linker) as a dopant], demonstrating the high versatility of the synthetic method developed to incorporate different fluorine-containing imidazole-based ligands. Second, we demonstrate for the first time that these nanoscale fluorinated ZIFs outperform the pristine ZIF-8 for water intrusion/extrusion, i.e., for storing mechanical energy via forced intrusion of nonwetting water due to the improved hydrophobicity and modified framework dynamics. Moreover, we also show that by varying the nature of the F-imidazole ligand, the performance of the resulting ZIFs, including the pressure thresholds and stored/dissipated energy, can be finely tuned, thus opening the path for the design of a library of fluorine-modified ZIFs with unique behavior.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surface engineered N/S Co-doped porous carbons derived from L-Cysteine and calcium citrate for the metal-free chemoselective reduction of p-chloronitrobenzene

  • Cuenca-Pérez, Daniela-Estefanía
  • Rodríguez-Carrillo, Aymara
  • Sepúlveda-Escribano, Antonio
  • Pastor-Blas, M. Mercedes
  • Rodríguez-Carrillo, Aymara|||/items/013918f2-b624-40ac-8af9-e95dd49bec56
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor-Blas, M. Mercedes|||/items/26967561-b753-4471-b615-ceb0537ec40b
The development of sustainable and efficient metal-free catalysts for the selective reduction of halogenated nitroarenes remains a significant challenge. Herein, N/S co-doped porous carbons were synthesized via direct pyrolysis of L-cysteine and calcium citrate, systematically varying precursor ratio and temperature (750–850 °C) to tune dopant speciation, defect density, and pore architecture. Comprehensive characterization (TGA, CHNS, XPS, Raman, and N2/CO2 physisorption) reveals that pyrolysis conditions govern the stabilization of catalytically relevant species, particularly pyridinic nitrogen and thiophenic sulfur, as well as the development of hierarchical porosity. The resulting materials exhibit high activity and outstanding chemoselectivity (>99%) in the hydrazine-mediated reduction of p-chloronitrobenzene to p-chloroaniline under mild conditions, without hydrodechlorination. The optimal sample (CysCit 1:2 P850) achieves the best balance between surface functionality, defect structure, and pore accessibility, leading to the highest apparent turnover frequency and improved stability. Post-reaction XPS analysis demonstrates that catalyst deactivation is primarily governed by surface-related phenomena, including partial site blockage and oxidation (N–Ox and S–Ox species), rather than by structural degradation of the carbon framework. These findings highlight that catalytic performance is controlled by the accessibility and local environment of active sites rather than their absolute concentration, providing key insights for the rational design of sustainable metal-free carbon catalysts for selective transformations of functionalized aromatic compounds.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The Facile Production of p-Chloroaniline Facilitated by an Efficient and Chemoselective Metal-Free N/S Co-Doped Carbon Catalyst

  • Villora-Picó, Juan José
  • Gil-Muñoz, Gema
  • Sepúlveda-Escribano, Antonio
  • Pastor-Blas, M. Mercedes
  • Gil-Muñoz, Gema|||/items/0788cd82-745f-472c-89b5-df98e6198f59
  • Pastor-Blas, M. Mercedes|||/items/26967561-b753-4471-b615-ceb0537ec40b
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
The catalytic hydrogenation of the toxic and harmful p-chloronitrobenzene to produce the value-added p-chloroaniline is an essential reaction for the sustainable chemical industry. Nevertheless, ensuring satisfactory control of its chemoselectivity is a great challenge. In this work, a N/S co-doped metal-free carbon catalyst has been fabricated by using cysteine as a source of C, N, and S. The presence of calcium citrate (porogen agent) in the mixture subjected to pyrolysis provided the carbon with porosity, which permitted us to overcome the issues associated with the loss of heteroatoms during an otherwise necessary activation thermal treatment. Full characterization was carried out and the catalytic performance of the metal-free carbon material was tested in the hydrogenation reaction of p-chloronitrobenzene to selectively produce p-chloroaniline. Full selectivity was obtained but conversion was highly dependent on the introduction of S due to the synergetic effect of S and N heteroatoms. The N/S co-doped carbon (CYSCIT) exhibits a mesoporous architecture which favors mass transfer and a higher doping level, with more exposed N and S doping atoms which act as catalytic sites for the hydrogenation of p-chloronitrobenzene, resulting in enhanced catalytic performance when compared to the N-doped carbon obtained from melamine and calcium citrate (MELCIT) used as a reference.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

An Atomically Dispersed Photocatalyst for Undirected para-Selective C─H Bond Functionalizations

  • Pradhan, Suman
  • Hu, Jun
  • Ren, Peng
  • Qin, Yuman
  • Jain, Noopur
  • Monti, Susanna
  • Barcaro, Giovanni
  • Jaworski, Aleksander
  • Dai, Xingchao
  • Rabeah, Jabor
  • Silvestre-Albero, Joaquín
  • Celorrio, Verónica
  • Rokicińska, Anna
  • Kuśtrowski, Piotr
  • Van Aert, Sandra
  • Bals, Sara
  • Das, Shoubhik
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Regioselective C─H bond functionalization is pivotal in modern scientific exploration, offering solutions for achieving novel synthetic methodologies and pharmaceutical development. In this aspect, achieving exceptional regioselective functionalization, like para-selective products in electron-poor aromatics, diverges from traditional methods. Leveraging the advantages of atomically dispersed photocatalysts, we designed a robust photocatalyst for an unconventional regioselective aromatic C─H bond functionalization. This innovation enabled para-selective trifluoromethylations of electron-deficient metadirecting aromatics (─NO2, ─CF3, ─CN, etc.), which is entirely orthogonal to the traditional approaches. Mechanistic experiments and DFT analysis confirmed the interaction between Cu-atom and the aromatic substrate, alongside the photocatalyst's molecular arrangement, driving selective exposure of the para-selective functionalization. This strategic approach elucidated pathways for precise molecular transformations, advancing the frontier of regioselective C─H bond functionalization by using atomically dispersed photocatalysts in organic synthesis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon@CeO2 nanocomposites modulate ROS homeostasis in UV-exposed bone marrow cells

  • Sarnatskaya, Veronika
  • Virych, Petro
  • Shlapa, Yuliia
  • Mikhailenko, Victor
  • Paziuk, Liubov
  • Melnyk, Viktor
  • Saulenko, Kyrylo
  • Virych, Pavlo
  • Silvestre-Albero, Joaquín
  • Belous, Anatolii
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
The development of advanced nanomaterials capable of modulating cellular redox homeostasis is critical for photoprotection and regenerative medicine. This study presents a comprehensive evaluation of a hybrid “carbon–cerium dioxide nanocomposite” (C@CeO2) designed to mitigate 390 nm UV-induced oxidative stress in mouse bone marrow cells (MBMCs). Using a multi-parametric approach, we demonstrate that while pristine carbon particles (CPs) exacerbate photo-oxidative damage at high concentrations, the integration of catalytic CeO2 nanoparticles (NPs) into a carbon matrix creates a synergistic “shielding” effect. Morphometric analysis revealed that the C@CeO2 composite significantly attenuates UV-induced cellular hypertrophy and morphological distortion, maintaining baseline cell area and circularity. Mechanistically, flow cytometric analysis using JC-1 and Annexin V/7-AAD uncovered a sophisticated phenotypic dissociation: the hybrid system decouples mitochondrial depolarization from terminal apoptotic commitment. This cytoprotection is further supported by metabolic profiling, which identified a Warburg-like shift toward aerobic glycolysis; C@CeO2 effectively normalized glucose homeostasis and maintained high glycolytic flux (lactate efflux) despite mitochondrial stress, providing a metabolic “backup generator” for cellular survival. Immunocytochemical profiling of the p53/p21, Bcl-2, and Wnt/β-catenin axes confirms that the nanocomposite reprograms the intracellular regulatory network, upregulating anti-apoptotic signaling (Bcl-2) and maintaining genomic surveillance. These findings demonstrate that C@CeO2 does not merely scavenge reactive oxygen species but actively modulates cellular adaptation to acute stress. This hybrid architectural approach offers a superior cytoprotective strategy, enabling highly effective radioprotection against UV-induced damage at low nanocomposite doses through synergistic shielding and catalytic redox activity rather than high material concentrations, with significant implications for biomedicine and the development of redox-active biomaterials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hydrogen-bonding ability induces structural flexibility in a zeolitic-imidazolate framework (ZIF-71)

  • Farrando Pérez, Judit
  • Missyul, Alexander
  • Gutiérrez-Sevillano, Juan José
  • Calero, Sofía
  • Carrillo-Carrión, Carolina
  • Martín-Calvo, Ana
  • Silvestre-Albero, Joaquín
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
The structural flexibility of ZIF-71 has been evaluated using a series of probe molecules with different chemical characteristics. Liquid-phase adsorption processes in aqueous media confirm that the studied analytes (aniline, phenol, benzoic acid, benzaldehyde, 4-fluoroaniline, toluene, fluorobenzene and chlorobenzene) can be classified into two groups, i.e., those with high accessibility (uptake above 200 mg g−1) and those with limited accessibility (approximately 10–20 mg g−1, i.e., one order of magnitude lower). Synchrotron X-ray powder diffraction measurements reveal that the limited uptake for certain probes is attributed to a phase transition, from the open-pore (op), ZIF-71 phase, to the narrow-pore (np), ZIF-72 phase. Interestingly, this irreversible phase transition is exclusively promoted by probes containing highly polar functional groups. Monte Carlo simulations suggest that the observed behavior cannot be fully justified by intermolecular interactions and/or water–probe interactions, but is instead driven by the hydrogen-bonding ability of the analytes. In other words, the phase transition occurs exclusively in the presence of analytes possessing strong hydrogen-bonding ability. These hydrogen-bonding interactions appear to facilitate water penetration into the otherwise hydrophobic inner cavities of ZIF-71, thereby accelerating the kinetically controlled transition from ZIF-71 (open-pore) to ZIF-72 (narrow-pore).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Molecular recognition-induced structural flexibility in ZIF-71

  • Farrando Pérez, Judit
  • Missyul, Alexander
  • Martín-Calvo, Ana
  • Abreu-Jaureguí, Coset
  • Ramírez-Cerezo, Víctor
  • Daemen, Luke L.
  • Cheng, Yongqiang
  • Ramírez-Cuesta, Anibal J.
  • Calero, Sofía
  • Carrillo-Carrión, Carolina
  • Silvestre-Albero, Joaquín
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
The adsorption performance of ZIF-71 towards two common volatile organic compounds, chlorobenzene and phenol, has been evaluated using a number of experimental techniques and Grand Canonical Monte Carlo (GCMC) simulations. Experimental results indicate that ZIF-71 can adsorb large quantities of chlorobenzene, while its adsorption performance for a similar molecule, such as phenol, is reduced by one order of magnitude. Synchrotron X-ray powder diffraction patterns confirm the presence of structural changes in ZIF-71 upon exposure to a phenol/water solution, i.e., a phase transition from the open-pore (op) ZIF-71 structure to the narrow-pore (np), highly dense, ZIF-72 phase. Although this phase transition does not occur in the presence of pure water, GCMC simulations suggest that phenol molecules adsorbed at the pore mouth and/or in structural defects may promote water accessibility to the inner core of the ZIF-71 microcrystals, thus promoting this thermodynamically favored phase transition. Inelastic neutron scattering (INS) and neutron diffraction (ND) experiments confirm the ZIF-71 to ZIF-72 phase transition, exclusively in samples exposed to a phenol/water solution. The presence of entrapped water molecules in the inner core of ZIF-71 crystals upon phenol adsorption, even after a drying step, suggests that the phase transition is likely initiated at the external surface of the ZIF-71 crystals.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Bioactive Carbon@CeO2 Composites as Efficient Antioxidants with Antiamyloid and Radioprotective Potentials

  • Shlapa, Yuliia
  • Siposova, Katarina
  • Sarnatskaya, Veronika
  • Drajnova, Michaela
  • Silvestre-Albero, Joaquín
  • Lykhova, Olexandra
  • Maraloiu, Valentin-Adrian
  • Solopan, Sergii Oleksandrovich
  • Molcan, Matus
  • Musatov, Andrey
  • Belous, Anatolii
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Blending carbon particles (CPs) and nanoscale bioactive cerium dioxide is a promising approach for designing composites for biomedical applications, combining the sorption and antioxidant potentials of each individual component. To address this issue, it is crucial to assess the correlation between the components’ ratio, physicochemical parameters, and biofunctionality of the composites. Thus, the current research was aimed at fabricating C@CeO2 composites with different molar ratios and the examination of how the parameters of the composites affect their bioactivity. XRD, X-ray photoelectron spectroscopy, and electron microscopy data verified the formation of C@CeO2 composites. CeO2 nanoparticles (NPs) of 4–6 nm are highly dispersed on the surfaces of amorphous CPs. The presence of CeO2 NPs on the carbon surface decreased its adsorption potential in a dose-dependent manner. Besides, the coexistence of carbon and CeO2 in a single composite promotes some redox interactions between O-functionalities and Ce3+/Ce4+ species, resulting in changes in the chemical state of the surface of the composites. These observations suggest the strong connection between these parameters and the biofunctionality of the composites. The presence of CeO2 NPs on the surface of carbon led to a significant increase in the stability of the prepared composites in their aqueous suspensions. The enhancement of bioactivity of the newly prepared C@CeO2 compared to bare carbon and CeO2 was validated by testing their pseudomimetic (catalase/peroxidase-like and superoxide dismutase-like), antiamyloid, and radioprotective activities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

NaOH-Modified Activated Carbon Materials for Hydrogen Sulfide Removal

  • Abid, Meriem
  • Martinez-Escandell, Manuel
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
A high-surface-area activated carbon material (RG) is used as a platform to create highly concentrated NaOH composites. These materials are tested for the removal of H2S under industrially relevant conditions (800 ppm H2S in CO2-, H2O- and O2-containing streams). The experimental results show that the breakthrough performance highly depends on the amount of NaOH incorporated and the experimental conditions used (e.g., relative humidity). The most promising material (RG-NaOH-30) reaches a saturation uptake of up to 800 mgH2S/g at 25 °C and atmospheric pressure. This value is among the most promising results reported in the literature for H2S removal, and it is well above traditional commercial samples. Breakthrough column tests confirm the promoting role of humidity in the reaction mechanism. Analysis of the adsorbents after H2S confirms the formation of well-defined sulfur (Sn) microcrystals as the main reaction product.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the Low-Pressure Hysteresis (LPH) in Gas Sorption Isotherms of Porous Carbons

  • Zelenka, Tomáš
  • Zelená, Lucie
  • Abreu-Jaureguí, Coset
  • Silvestre-Albero, Joaquín
  • Zelenková, Gabriela
  • Slovák, Václav
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
This study investigates the origin of low-pressure hysteresis (LPH) in the adsorption and desorption of three different probe molecules: carbon dioxide, nitrogen, and argon, across various adsorption temperatures (from cryogenic to room temperature), and within five different carbon materials: synthetic carbons (pristine and one post-synthetically oxidized) and natural coal. Significant attention is dedicated to elucidating LPH in oxidized samples outgassed at various temperatures (120–350 °C). Experimental results show that insufficient outgassing temperature can lead to unreliable data due to artificial LPH and significantly underestimated textural properties, primarily caused by porosity blockage from substances like moisture. Conversely, in samples where heteroatoms have a stabilizing effect on texture, such as natural coal, careful consideration of outgassing temperature is crucial due to the risk of thermal degradation. Other factors contributing to LPH are adsorption temperature, and especially, kinetic limitations at cryogenic temperatures for cellulose-based carbons. Minor factors responsible for LPH are the physical state of the sample (monolith vs powder) and the flexibility of the porous system, both studied by carbon dioxide sorption. This study constitutes an important piece in the evaluation of LPH, providing practical recommendations and underlining the importance of experimental design, with implications for further research in this complex field.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Preparation of graphite oxide and reduced graphite oxide from petroleum cokes: effect of the coke mesophase structure and the degree of graphitization of the coke

  • Coves Pardines, Iván
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
Graphene and graphene oxide are commonly synthesized from highly graphitized precursors, whose preparation requires extreme temperatures and entails high energy consumption. In this study, graphite oxide and graphene-like materials were prepared by the Hummers method using petroleum-derived cokes as low-cost pre-graphitic precursors. Vacuum residue (VR) and decanted oil (DO) cokes with different mesophase structures were heat-treated between 650 and 2300 °C and compared with a commercial graphite reference. The structural and morphological evolution of the precursors and derived materials was investigated by X-ray diffraction, thermal analysis coupled with mass spectrometry, X-ray photoelectron spectroscopy, Raman spectroscopy, and electron microscopy. The degree of graphitization was found to depend strongly on both the mesophase structure of the coke and the heat-treatment temperature. The efficiency of Hummers oxidation was highly dependent on the precursor structure: more graphitized materials incorporated larger amounts of oxygen-containing groups, which decomposed during reduction and promoted exfoliation, whereas less graphitized cokes exhibited limited oxygen uptake and poorer exfoliation. Raman analysis indicates that oxidation severely disrupts long-range graphitic order, yielding reduced oxide materials composed of defect-rich sp2 domains regardless of the precursor origin. Electron microscopy confirms partial delamination into sheet-like domains composed of few-layer graphene crystallites for materials derived from highly graphitized cokes and commercial graphite.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surface chemistry engineering via phytic acid doping: Tailoring activated carbons for selective catalysis

  • Duran-Uribe, Edgar S.
  • Villora-Picó, Juan José
  • Sepúlveda-Escribano, Antonio
  • Ramos-Fernández, Enrique V.
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Phytic acid (PA) is a renewable and efficient phosphorus precursor for synthesizing P-doped activated carbons, offering advantages such as ease of handling and the ability to introduce defined surface functionalities. However, the role of PA as a direct dopant and the influence of synthesis parameters on the resulting materials' structure and performance have not been sufficiently explored. In this study, a commercial porous carbon (RGC-30) was doped with PA using a strategy that combines mild pre-treatment and pyrolysis at temperatures ranging from 650 to 950 °C. Comprehensive characterization reveals that phosphorus speciation is highly dependent on synthesis conditions. Oxidized P groups form at lower temperatures, while pre-treatment combined with higher pyrolysis temperatures favors reduced species such as C3PO and C3P. Catalytic testing in two model reactions—benzyl alcohol oxidation and hydrogenation of 1-chloro-4-nitrobenzene—demonstrates that C3PO groups are highly active and stable in oxidation, while C3P species enhance hydrogenation activity but gradually convert into C3PO over time. These findings highlight the tunability of PA-derived P-doped carbons and establish a clear structure–activity relationship, where surface speciation, rather than total P content, governs catalytic behavior. This work positions phytic acid as a green and scalable dopant for designing robust, metal-free catalysts for selective transformations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

N-doped activated carbons obtained from polyaniline for toluene and water adsorption

  • Villora-Picó, Juan José
  • Coloma, Fernando
  • Sepúlveda-Escribano, Antonio
  • Pastor-Blas, M. Mercedes
  • Coloma, Fernando|||/items/c863d86a-5c8a-4b7b-87b0-8b64b6e14854
  • Pastor-Blas, M. Mercedes|||/items/26967561-b753-4471-b615-ceb0537ec40b
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Nitrogen-doped carbons were obtained by the pyrolysis of polyaniline (PANI), which had been previously synthesized by chemical oxidative polymerization of aniline at two different temperatures (0 and 25 °C). A series of activation treatments with steam under different experimental conditions were carried out in order to develop carbon porosity. It has been shown that the experimental polymerization conditions greatly affect the properties of the N-doped carbons and their reactivity to the steam activation treatment. Carbons were characterized by N2 adsorption at −196 °C, CHNS Elemental Analysis and XPS and their hydrophilicity/hydrophobicity were assessed by water adsorption measurements. The carbons prepared from PANI synthesized at 0 °C showed a more developed porosity and specific surface area than those obtained from PANI synthesized at 25 °C. The increase in the activation temperature produces the loss of the nitrogen heteroatom. Adsorption of water and toluene depends on the amount of surface nitrogen atoms as well as on the pore structure developed in the carbon.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improved Catalytic Efficiency of Pt/CeO2 in Toluene Combustion by Its Incorporation in the Structure of Hydrophobic Mesoporous Carbon

  • Jarczewski, Sebastian
  • Berniak, Tomasz
  • Wysocka, Emilia
  • Rokicińska, Anna
  • Żurowska, Magdalena
  • Baranska, Katarzyna
  • Debosz, Marek
  • Abreu-Jaureguí, Coset
  • Silvestre-Albero, Joaquín
  • Kuśtrowski, Piotr
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Mesoporous Pt/C-CeO2 catalysts for the combustion of volatile organic compounds (VOCs) were developed. The materials were obtained by nanoreplication of spherical silica gel. The pores of the SiO2 template were filled simultaneously with a solution of sucrose and Ce(III) nitrate, and the obtained composites were carbonized. After etching of the SiO2 template with NaOH, colloidal Pt (1 wt.%) was introduced onto the C-CeO2 supports containing different amounts of cerium (0–20 wt.%) using the polyol method. The synthesized materials were examined in terms of their structure (XRD), porosity (low-temperature N2 adsorption), morphology (SEM-EDS, TEM), bulk (XRF, elemental analysis), and surface (XPS) composition. Moreover, hydrophobic properties of their surfaces were determined by immersion calorimetry measurements using solvents of different polarity (i.e., hexane, methanol, water, and acetone). Finally, their catalytic activity in toluene combustion was tested, as well as stability under variable humidity of a purified gas. It was found that the developed materials showed very high activity at low temperatures, while maintaining resistance to H2O vapor due to the presence of an appropriately selected active phase and a hydrophobic surface.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorinated Nanosized Zeolitic-Imidazolate Frameworks as PotentialDevices for Mechanical Energy Storage

  • Amayuelas, Eder
  • Farrando-Pérez, Judit
  • Missyul, Alexander
  • Grosu, Yaroslav
  • Silvestre-Albero, Joaquín
  • Carrillo-Carrión, Carolina
Chemicals and CAS Registry Numbers fluorine 7782-41-4 imidazole 1467-16-9, 288-32-4 iodate 15454-31-6, Fluorination is one of the most efficient and universalstrategies to increase the hydrophobicity of materials and consequentlytheir water stability. Zeolitic-imidazolate frameworks (ZIFs), whichhave limited stability in aqueous media and even lower stability whensynthesized on a nanometric scale, can greatly benefit from theincorporation of fluorine atoms, not only to improve their stability butalso to provide additional properties. Herein, we report the preparationof two different fluorinated ZIFs through a simple and scalableapproach by using mixed ligands [2-methylimidazole, as a commonligand, and 4-(4-fluorophenyl)-1H-imidazole (monof luorinated linker)or 2-methyl-5-(trifluoromethyl)-1H-imidazole (trifluorinated linker) asa dopant], demonstrating the high versatility of the synthetic methoddeveloped to incorporate different fluorine-containing imidazole-basedligands. Second, we demonstrate for the first time that these nanoscale fluorinated ZIFs outperform the pristine ZIF-8 for waterintrusion/extrusion, i.e., for storing mechanical energy via forced intrusion of nonwetting water due to the improved hydrophobicityand modified framework dynamics. Moreover, we also show that by varying the nature of the F-imidazole ligand, the performance ofthe resulting ZIFs, including the pressure thresholds and stored/dissipated energy, can be finely tuned, thus opening the path for thedesign of a library of fluorine-modified ZIFs with unique behavior., The authors would like to acknowledge financial support from Ministerio de Ciencia e Innovación through projects (PID2022-142960OB-C21 and PID2022-141034OB-C22 funded by MICIU/AEI and FEDER/UE), and Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital (project CIPROM/2021/022), EU MSCA project CLEANWATER (grant agreement: 101131382) and RYC2021-032445-I grant funded by MICIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Narodowe Centrum Nauki (National Science Centre, Poland) no. 2021/43/D/ST5/00062. A portion of this research used resources of the MSPD beamline at ALBA Synchrotron (proposal number AV 2023027577)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Molecular recognition-induced structural flexibility in ZIF-71

  • Farrando-Pérez, Judit
  • Missyul, A.
  • Martin Calvo, A.
  • Abreu Jauregui, C.
  • Ramirez-Cerezo, V.
  • Daemen, Luke L
  • Cheng, Yongqiang Q
  • Ramirez-Cuesta, Anibal J
  • Calero, Sofía
  • Carrillo-Carrión, Carolina
  • Silvestre-Albero, Joaquín
The adsorption performance of ZIF-71 towards two common volatile organic compounds, chlorobenzene and phenol, has been evaluated using a number of experimental techniques and Grand Canonical Monte Carlo (GCMC) simulations. Experimental results indicate that ZIF-71 can adsorb large quantities of chlorobenzene, while its adsorption performance for a similar molecule, such as phenol, is reduced by one order of magnitude. Synchrotron X-ray powder diffraction patterns confirm the presence of structural changes in ZIF-71 upon exposure to a phenol/water solution, i.e., a phase transition from the open-pore (op) ZIF-71 structure to the narrow-pore (np), highly dense, ZIF-72 phase. Although this phase transition does not occur in the presence of pure water, GCMC simulations suggest that phenol molecules adsorbed at the pore mouth and/or in structural defects may promote water accessibility to the inner core of the ZIF-71 microcrystals, thus promoting this thermodynamically favored phase transition. Inelastic neutron scattering (INS) and neutron diffraction (ND) experiments confirm the ZIF-71 to ZIF-72 phase transition, exclusively in samples exposed to a phenol/water solution. The presence of entrapped water molecules in the inner core of ZIF-71 crystals upon phenol adsorption, even after a drying step, suggests that the phase transition is likely initiated at the external surface of the ZIF-71 crystals., J. S. A. acknowledges financial support from MCIN (Project PID2022-142960OB-C21), and Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (Project CIPROM/2021/022). Synchrotron X-ray powder diffraction measurements were performed at the Spanish ALBA synchrotron (Projects AV-2023027577 and AV-2022097149). INS experiments were conducted at the VISION beamline (Project IPTS-29742.1) at the Spallation Neutron Source, Oak Ridge National Laboratory (ORNL), which is supported by the Scientific User Facilities Division, Office of Basic Energy Sciences (BES), US Department of Energy (DoE), under contract no. DE-AC0500OR22725 with UT Battelle, LLC. A.M.-C. thanks MCINyU (IJC2019-042207-I) and C3UPO for financial and HPC support. V. R. C. acknowledges a PhD fellowship from ILL (project CLAHY2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogen-bonding ability induces structural flexibility in a zeolitic-imidazolate framework (ZIF-71)

  • Farrando-Pérez, Judit
  • Missyul, A.
  • Gutiérrez-Sevillano, J.J.
  • Calero, Sofía
  • Carrillo-Carrión, Carolina
  • Martin-Calvo, A.
  • Silvestre-Albero, Joaquín
The structural flexibility of ZIF-71 has been evaluated using a series of probe molecules with different chemical characteristics. Liquid-phase adsorption processes in aqueous media confirm that the studied analytes (aniline, phenol, benzoic acid, benzaldehyde, 4-fluoroaniline, toluene, fluorobenzene and chlorobenzene) can be classified into two groups, i.e., those with high accessibility (uptake above 200 mg g−1) and those with limited accessibility (approximately 10–20 mg g−1, i.e., one order of magnitude lower). Synchrotron X-ray powder diffraction measurements reveal that the limited uptake for certain probes is attributed to a phase transition, from the open-pore (op), ZIF-71 phase, to the narrow-pore (np), ZIF-72 phase. Interestingly, this irreversible phase transition is exclusively promoted by probes containing highly polar functional groups. Monte Carlo simulations suggest that the observed behavior cannot be fully justified by intermolecular interactions and/or water–probe interactions, but is instead driven by the hydrogen-bonding ability of the analytes. In other words, the phase transition occurs exclusively in the presence of analytes possessing strong hydrogen-bonding ability. These hydrogen-bonding interactions appear to facilitate water penetration into the otherwise hydrophobic inner cavities of ZIF-71, thereby accelerating the kinetically controlled transition from ZIF-71 (open-pore) to ZIF-72 (narrow-pore)., J. S. A. acknowledges financial support from MCIN (Project PID2022-142960OB-C21), and Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital (Project CIPROM/2021/022). Synchrotron X-ray powder diffraction measurements were performed at the Spanish ALBA synchrotron (Project AV-2024028095). J. J. G.-S. and A. M.-C. thank the Spanish Ministerio de Ciencia e Innovación for financial support (CNS2022-136163 and PID2023-152095NA-I00) and C3UPO for HPC support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Hydrogen-bonding ability induces structural flexibility in ZIF-71 [Dataset]

  • Farrando-Pérez, Alex
  • Missyul, A.
  • Calero, Sofía
  • Carrillo-Carrión, Carolina
  • Martin-Calvo, A.
  • Silvestre-Albero, Joaquín
The structural flexibility of ZIF-71 has been evaluated using a series of probe molecules with different chemical characteristics. Liquid-phase adsorption processes in aqueous media confirm that the studied analytes (aniline, phenol, benzoic acid, benzaldehyde, 4-fluoroaniline, toluene, fluorobenzene and chlorobenzene) can be classified into two groups, i.e., those with high accessibility (uptake above 200 mg g−1) and those with limited accessibility (approximately 10–20 mg g−1, i.e., one order of magnitude lower). Synchrotron X-ray powder diffraction measurements reveal that the limited uptake for certain probes is attributed to a phase transition, from the open-pore (op), ZIF-71 phase, to the narrow-pore (np), ZIF-72 phase. Interestingly, this irreversible phase transition is exclusively promoted by probes containing highly polar functional groups. Monte Carlo simulations suggest that the observed behavior cannot be fully justified by intermolecular interactions and/or water–probe interactions, but is instead driven by the hydrogen-bonding ability of the analytes. In other words, the phase transition occurs exclusively in the presence of analytes possessing strong hydrogen-bonding ability. These hydrogen-bonding interactions appear to facilitate water penetration into the otherwise hydrophobic inner cavities of ZIF-71, thereby accelerating the kinetically controlled transition from ZIF-71 (open-pore) to ZIF-72 (narrow-pore)., J. S. A. acknowledges financial support from MCIN (Project PID2022-142960OB-C21), and Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital (Project CIPROM/2021/022). Synchrotron X-ray powder diffraction measurements were performed at the Spanish ALBA synchrotron (Project AV-2024028095). J. J. G.-S. and A. M.-C. thank the Spanish Ministerio de Ciencia e Innovación for financial support (CNS2022-136163 and PID2023-152095NA-I00) and C3UPO for HPC support., Peer reviewed