Pasar al contenido principal

SINTESIS A MEDIDA DE CARBONES DOPADOS CON FOSFORO PARA APLICACIONES EN ADSORCION Y CATALISIS

PID2019-108453GB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improved thermal management in HKUST-1 composites upon graphite flakes incorporation: Hydrogen adsorption properties

  • Farrando Pérez, Judit
  • Rodríguez-Castillo, María
  • Martinez-Escandell, Manuel
  • Monge, Miguel
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
HKUST-1-based composites have been synthesized through the incorporation of synthetic graphite flakes in the MOF synthesis media. The presence of flakes gives rise to high quality HKUST-1 crystals, combining different morphologies (octahedral-shape crystals, cauliflower-shape crystals and truncated pyramids). The incorporation of graphite in the composites improves the structural stability of the embedded nanocrystals upon a conforming step at 377 kg/cm2 (0.5 tons), with limited structural damage (below 10% BET surface area reduction as compared to the 40% observed for pure HKUST-1). Furthermore, composites exhibit a significant improvement in thermal management, associated with the excellent thermal and electrical properties of the graphite microdomains incorporated. The improved stability of the composites is also reflected in the adsorption performance for hydrogen at atmospheric pressure and cryogenic temperatures, with a significant preservation of the adsorption properties (gravimetric capacity, <15% decrease vs powders) in the monoliths containing graphite. The best adsorption performance is achieved with sample HKUST-1@10GF, in monolithic form, with a volumetric excess uptake at 0.1 MPa and −195 °C close to 18.7 g/L. This value is among the best described in the literature for monolithic MOFs under similar adsorption conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of Porosity and Surface Chemistry on CO2 and CH4 Adsorption in S-Doped and S-/O-co-Doped Porous Carbons

  • Reljic, Snezana
  • Martinez-Escandell, Manuel
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
The aim of this study was to determine the adsorption performance of a petroleum pitch-based activated carbon (PPAC1:3) before and after a post-treatment with H2S. In the first step, a microporous activated carbon (PPAC1:3) with a highly developed porous structure was produced through a chemical activation route with KOH. Afterward, the synthesized activated carbon was thermally treated yielding two different series of functionalized activated carbons: (i) a series of carbons were treated directly with H2S at elevated temperatures (600 °C and 800 °C), and (ii) a series of carbons were generated by combining an oxidation treatment with plasma followed by H2S treatment at elevated temperatures (600 °C and 800 °C). The chemical and structural characteristics of the S-doped and S-/O-co-doped porous carbons were investigated by means of different experimental techniques, such as XRD, RAMAN, FESEM, XPS, TPD, N2, and CO2 adsorption, and finally tested in CO2 and CH4 adsorption at atmospheric and high pressure. The functionalized porous carbons possessed specific surface areas of 2420–2690 m2/g, total pore volume of 1.05–1.18 cm3/g, and sulfur content up to 2.55 atom % (the sulfur content of the original carbon was 0.19%). After a careful analysis of the carbon dioxide and methane uptake at atmospheric (0.1 MPa) and high pressure (4 MPa), adsorption results confirm that the microporous structure is the main structural parameter defining the adsorption performance and, to a lower extent, the surface chemistry. Overall, a significant improvement in the total uptake can be appreciated after the H2S treatment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Monolithic metal–organic frameworks for carbon dioxide separation

  • Madden, David G.
  • Babu, Robin
  • Çamur, Ceren
  • Rampal, Nakul
  • Silvestre-Albero, Joaquín
  • Curtin, Teresa
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Carbon dioxide (CO2) is both a primary contributor to global warming and a major industrial impurity. Traditional approaches to carbon capture involve corrosive and energy-intensive processes such as liquid amine absorption. Although adsorptive separation has long been a promising alternative to traditional processes, up to this point there has been a lack of appropriate adsorbents capable of capturing CO2 whilst maintaining low regeneration energies. In the context of CO2 capture, metal–organic frameworks (MOFs) have gained much attention in the past two decades as potential materials. Their tuneable nature allows for precise control over the pore size and chemistry, which allows for the tailoring of their properties for the selective adsorption of CO2. While many candidate materials exist, the amount of research into material shaping for use in industrial processes has been limited. Traditional shaping strategies such as pelletisation involve the use of binders and/or mechanical processes, which can have a detrimental impact on the adsorption properties of the resulting materials or can result in low-density structures with low volumetric adsorption capacities. Herein, we demonstrate the use of a series of monolithic MOFs (monoUiO-66, monoUiO-66-NH2 & monoHKUST-1) for use in gas separation processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon-based monoliths with improved thermal and mechanical properties for methane storage

  • Reljic, Snezana
  • Cuadrado-Collados, Carlos
  • Farrando Pérez, Judit
  • Jardim, Erika de Oliveira
  • Martinez-Escandell, Manuel
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
A series of activated carbon materials have been prepared from petroleum residue using KOH as activating agent. The gravimetric adsorption capacity for methane of the synthesized samples increases with the activation degree, albeit at a lower packing density of the carbon material. These results anticipate an optimum pitch/KOH ratio (1:3) to achieve an upper limit in the volumetric storage capacity. Activated carbon powders have been conformed into monoliths using a small amount of a binder (5 wt%), either carboxymethyl cellulose or polyvinyl alcohol, with proper mechanical properties. Incorporation of graphite or graphene in the initial formulation does not alter and/or modify significantly the textural properties of the original activated carbon. However, once conformed into monoliths, the presence of graphite or graphene allows to improve i) the packing density of the monoliths (up to 0.52 g/cm3), ii) their mechanical properties (compressive strength ≈ 12.3 MPa) and iii) their thermal conductivity (up to 0.49 W/mK) without compromising the methane storage capacity (ca. 100 V/V).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Monolithic Zirconium-Based Metal–Organic Frameworks for Energy-Efficient Water Adsorption Applications

  • Çamur, Ceren
  • Babu, Robin
  • Suárez del Pino, Jose A.
  • Rampal, Nakul
  • Pérez Carvajal, Javier
  • Hügenell, Philipp
  • Ernst, Sebastian-Johannes
  • Silvestre-Albero, Joaquín
  • Imaz, Inhar
  • Madden, David G.
  • Maspoch, Daniel
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO2 emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal–organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH2, and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed—solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm−3 without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Molecular Sieving Properties of Nanoporous Mixed-Linker ZIF-62: Associated Structural Changes upon Gas Adsorption Application

  • Gandara-Loe, Jesús
  • Bueno-Perez, Rocio
  • Missyul, Alexander
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
The evaluation of the flexibility in zeolitic imidazolate frameworks (ZIFs) has been very useful to understand their performance in gas adsorption and separation applications. Here, we have evaluated the adsorption properties of a nanoporous mixed-linker ZIF-62 using a combination of gas adsorption measurements, grand canonical Monte Carlo simulations, and synchrotron X-ray powder diffraction under operando conditions. While adsorption studies in nanoporous ZIF-62 at 77 K and atmospheric pressure predict a large O2/N2 separation ability, computational studies anticipate that the observed differences must be attributed to kinetic restrictions of N2 to access the internal porosity at cryogenic temperatures. Interestingly, upon a small increase in the adsorption temperature (90 K vs 77 K), both N2 and O2 are able to access the inner porous structure through the promotion of a phase transition (ca. 3.8% volume expansion) upon gas adsorption. This narrow phase (np) to expanded phase (ep) structural transition in ZIF-62 is completely suppressed above 150 K. Based on the excellent molecular sieve properties of nanoporous ZIF-62 for O2/N2 at cryogenic temperatures, we extended our study to the adsorption of linear and branched hydrocarbons. This study predicts the preferential adsorption of alkanes over alkenes in ZIF-62 for small hydrocarbons (C2), while in the case of C3 hydrocarbons and above, the adsorption process is mainly defined by kinetic restrictions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sol-gel processing of a covalent organic framework for the generation of hierarchically porous monolithic adsorbents

  • Carrington, Mark E.
  • Rampal, Nakul
  • Madden, David G.
  • O’Nolan, Daniel
  • Casati, Nicola Pietro Maria
  • Divitini, Giorgio
  • Martín-Illán, Jesús Á.
  • Tricarico, Michele
  • Cepitis, Ritums
  • Çamur, Ceren
  • Curtin, Teresa
  • Silvestre-Albero, Joaquín
  • Tan, Jin-Chong
  • Zamora, Félix
  • Taraskin, Sergei
  • Chapman, Karena W.
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Covalent organic frameworks (COFs) have emerged as a versatile material platform for such applications as chemical separations, chemical reaction engineering, and energy storage. Their inherently low mechanical stability, however, frequently renders existing methods of pelletization ineffective, contributing to pore collapse, pore blockage, or insufficient densification of crystallites. Here, we present a process for the shaping and densifying of COFs into robust centimeter-scale porous monoliths without the need for templates, additives, or binders. This process minimizes mechanical damage from shear-induced plastic deformation and further provides a network of interparticle mesopores that we exploit in accessing analyte capacities above those achievable from the intrinsic COF structure. Using a lattice-gas model, we accurately capture the monolithic structure across the mesoporous range and tie pore architecture to performance in both gas-storage and -separation applications. Collectively, these results represent a substantial step in the practical applicability of COFs and other mechanically weak porous materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improved photocatalytic performance of TiO2/carbon photocatalysts: Role of carbon additive

  • Abreu-Jaureguí, Coset
  • Andronic, Luminita
  • Sepúlveda-Escribano, Antonio
  • Silvestre-Albero, Joaquín
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
A series of TiO2 – based photocatalysts have been prepared by the incorporation of 10 wt% of various carbon-based nanomaterials as modifying agents to titania. More specifically, commercial TiO2 P25 was modified through a wet impregnation approach with methanol with four different carbon nanostructures: single-walled carbon nanotubes (SWCNTs), partially reduced graphene oxide (prGO), graphite (GI), and graphitic carbon nitride (gCN). Characterization results (XPS and Raman) anticipate the occurrence of important interfacial phenomena, preferentially for samples TiO2/SWCNT and TiO2/prGO, with a binding energy displacement of 1.35 eV and 1.54 eV, respectively, in the Ti2p contribution. These findings could be associated with an improved electron-hole mobility at the carbon/oxide interface. Importantly, these two samples constitute the most promising photocatalysts for Rhodamine B (RhB) photodegradation, with nearly 100% conversion in less than 2 h. These promising results must be associated with intrinsic physicochemical changes at the formed heterojunction structure, and the potential dual-role of the composites able to adsorb and degrade RhB simultaneously. Cyclability tests confirm the improved performance of the composites (e.g., TiO2/SWCNT, 100% degradation in 1 h) due to the combined adsorption/degradation ability, although the regeneration after several cycles is not complete due to partial blocking of the inner cavities in the carbon nanotubes by non-reacted RhB. Under these reaction conditions, Rhodamine-B xanthene dye degrades via the de-ethylation route.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exceptional performance of Fe@carbon-rich nanoparticles prepared via hydrothermal carbonization of oil mill wastes for H2S removal

  • Abid, Meriem
  • Garcia, Ruben
  • Martinez-Escandell, Manuel
  • Fullana, Andres
  • Silvestre-Albero, Joaquín
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Carbon-encapsulated iron oxide nanoparticles (CE-nFe) have been obtained from an industrial waste (oil mill wastewater-OMW, as a carbonaceous source), and using iron sulfate as metallic precursor. In an initial step, the hydrochar obtained has been thermally activated under an inert atmosphere at three different temperatures (600°C, 800°C and 1000°C). The thermal treatment promotes the development of core-shell nanoparticles, with an inner core of α-Fe/Fe3O4 surrounded by a well-defined graphite shell. Temperatures above 800°C are needed to promote the graphitization of the carbonaceous species, a process promoted by iron nanoparticles through the dissolution, diffusion and growth of the carbon nanostructures on the outer shell. Breakthrough column tests show that CE-nFe exhibit an exceptional performance for H2S removal with a breakthrough capacity larger than 0.5-0.6 g H2S/gcatalyst after 3 days experiment. Experimental results anticipate the crucial role of humidity and oxygen in the adsorption/catalytic performance. Compared to some commercial samples, these results constitute a three-fold increase in the catalytic performance under similar experimental conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rapid and efficient hydrogen clathrate hydrate formation in confined nanospace

  • Farrando Pérez, Judit
  • Balderas-Xicohtencatl, Rafael
  • Cheng, Yongqiang
  • Daemen, Luke L.
  • Cuadrado-Collados, Carlos
  • Martinez-Escandell, Manuel
  • Ramírez-Cuesta, Anibal J.
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
Clathrate hydrates are crystalline solids characterized by their ability to accommodate large quantities of guest molecules. Although CH4 and CO2 are the traditional guests found in natural systems, incorporating smaller molecules (e.g., H2) is challenging due to the need to apply higher pressures to stabilize the hydrogen-bonded network. Another critical limitation of hydrates is the slow nucleation and growth kinetics. Here, we show that specially designed activated carbon materials can surpass these obstacles by acting as nanoreactors promoting the nucleation and growth of H2 hydrates. The confinement effects in the inner cavities promote the massive growth of hydrogen hydrates at moderate temperatures, using pure water, with extremely fast kinetics and much lower pressures than the bulk system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Controlling the Adsorption and Release of Ocular Drugs in Metal–Organic Frameworks: Effect of Polar Functional Groups

  • Farrando Pérez, Judit
  • Martínez Navarrete, Gema Concepción
  • Gandara-Loe, Jesús
  • Reljic, Snezana
  • García Ripoll, Antonio
  • Fernandez, Eduardo
  • Silvestre-Albero, Joaquín
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
A series of UiO-66 materials with different functional groups (−H, −NH2, and −NO2) have been evaluated for the adsorption and release of a common ocular drug such as brimonidine tartrate. UiO-66 samples were synthesized under solvothermal conditions and activated by solvent exchange with ethanol. Experimental results suggest that the incorporation of surface functionalities gives rise to the development of structural defects (missing linker defects) but without altering the basic topology of the UiO-66 framework. These defects improve the adsorption performance of the parent metal–organic framework (MOF), while the bulkier functionalities infer slower release kinetics, with the associated benefits for prolonged delivery of brimonidine. Among the evaluated MOFs, defective UiO-66-NO2 can be proposed as the most promising candidate due to the combination of a larger brimonidine volumetric uptake (680 mg/cm3), a prolonged delivery (period of up to 25 days), a small particle size, and a larger instability. Contrariwise, at high concentrations UiO-66-NO2 has higher toxicity toward human retinal pigment epithelium cells (ARPE-19) compared to the pure and NH2-functionalized UiO-66.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ni-Phosphide catalysts as versatile systems for gas-phase CO2 conversion: Impact of the support and evidences of structure-sensitivity

  • Zhang, Qi
  • Pastor Pérez, Laura
  • Villora-Picó, Juan José
  • Joyce, Miriam
  • Sepúlveda-Escribano, Antonio
  • Duyar, Melis S.
  • Ramírez Reina, Tomás
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
We report for the first time the support dependent activity and selectivity of Ni-rich nickel phosphide catalysts for CO2 hydrogenation. New catalysts for CO2 hydrogenation are needed to commercialise the reverse water–gas shift reaction (RWGS) which can feed captured carbon as feedstock for traditionally fossil fuel-based processes, as well as to develop flexible power-to-gas schemes that can synthesise chemicals on demand using surplus renewable energy and captured CO2. Here we show that Ni2P/SiO2 is a highly selective catalyst for RWGS, producing over 80% CO in the full temperature range of 350–750 °C. This indicates a high degree of suppression of the methanation reaction by phosphide formation, as Ni catalysts are known for their high methanation activity. This is shown to not simply be a site blocking effect, but to arise from the formation of a new more active site for RWGS. When supported on Al2O3 or CeAl, the dominant phase of as synthesized catalysts is Ni12P5. These Ni12P5 catalysts behave very differently compared to Ni2P/SiO2, and show activity for methanation at low temperatures with a switchover to RWGS at higher temperatures (reaching or approaching thermodynamic equilibrium behaviour). This switchable activity is interesting for applications where flexibility in distributed chemicals production from captured CO2 can be desirable. Both Ni12P5/Al2O3 and Ni12P5/CeAl show excellent stability over 100 h on stream, where they switch between methanation and RWGS reactions at 50–70% conversion. Catalysts are characterized before and after reactions via X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), temperature-programmed reduction and oxidation (TPR, TPO), Transmission Electron Microscopy (TEM), and BET surface area measurement. After reaction, Ni2P/SiO2 shows the emergence of a crystalline Ni12P5 phase while Ni12P5/Al2O3 and Ni12P5/CeAl both show the crystalline Ni3P phase. While stable activity of the latter catalysts is demonstrated via extended testing, this Ni enrichment in all phosphide catalysts shows the dynamic nature of the catalysts during operation. Moreover, it demonstrates that both the support and the phosphide phase play a key role in determining selectivity towards CO or CH4.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Microwave-assisted synthesis of CoxP@C catalysts: Application to the hydrogenation of 1-chloro-4-nitrobezene

  • Duran-Uribe, Edgar S.
  • Sepúlveda-Escribano, Antonio
  • Ramos-Fernández, Enrique V.
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Transition metal phosphides (TMP) have gained great interest as catalysts for hydrogenation reactions due to their physical and chemical properties. Among these reactions, the hydrogenation of nitroarenes to the corresponding anilines is of great industrial importance, as these compounds are precursors of high value-added chemicals. In this work, we present the microwave-assisted synthesis of cobalt phosphide nanoparticles supported on carbon, and its application in the hydrogenation of 1-chloro-4-nitrobenzene. The catalysts were characterised by transmission electron microscopy (TEM), temperature-programmed reduction (TPR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and N2 adsorption at −196 °C. It could be observed that the catalytic activity depends on the reduction temperature, since it determines the crystalline phase of the phosphide. Thus, we found that the most active phase for the hydrogenation of 1-chloro-4-nitrobenzene corresponds to a phosphorus-rich cobalt phosphide obtained at low reduction temperatures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly N2-Selective Activated Carbon-Supported Pt-In Catalysts for the Reduction of Nitrites in Water

  • Soares, Olívia Salomé G.P.
  • Jardim, Erika de Oliveira
  • Ramos-Fernández, Enrique V.
  • Villora-Picó, Juan José
  • Pastor-Blas, M. Mercedes
  • Silvestre-Albero, Joaquín
  • Órfão, José J.M.
  • Pereira, Manuel Fernando R.
  • Sepúlveda-Escribano, Antonio
  • Pastor-Blas, M. Mercedes|||/items/26967561-b753-4471-b615-ceb0537ec40b
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
The catalytic reduction of nitrites over Pt-In catalysts supported on activated carbon has been studied in a semi-batch reactor, at room temperature and atmospheric pressure, and using hydrogen as the reducing agent. The influence of the indium content on the activity and selectivity was evaluated. Monometallic Pt catalysts are very active for nitrite reduction, but the addition of up to 1 wt% of indium significantly increases the nitrogen selectivity from 0 to 96%. The decrease in the accessible noble metal surface area reduces the amount of hydrogen available at the catalyst surface, this favoring the combination of nitrogen-containing intermediate molecules to promote the formation of N2 instead of being deeply hydrogenated into NH4+. Several activated carbon-supported Pt-In catalysts, activated under different calcination and reduction temperatures, have been also evaluated in nitrite reduction. The catalyst calcined and reduced at 400°C showed the best performance considering both the activity and the selectivity to nitrogen. This enhanced selectivity is ascribed to the formation of Pt-In alloy. The electronic properties of Pt change upon alloy formation, as it is demonstrated by XPS.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Densified HKUST-1 Monoliths as a Route to High Volumetric and Gravimetric Hydrogen Storage Capacity

  • Madden, David G.
  • O’Nolan, Daniel
  • Rampal, Nakul
  • Babu, Robin
  • Çamur, Ceren
  • Al Shakhs, Ali N.
  • Zhang, Shi-Yuan
  • Rance, Graham A.
  • Perez, Javier
  • Casati, Nicola Pietro Maria
  • Cuadrado-Collados, Carlos
  • O’Sullivan, Denis
  • Rice, Nicholas P.
  • Gennett, Thomas
  • Parilla, Philip
  • Shulda, Sarah
  • Hurst, Katherine E.
  • Stavila, Vitalie
  • Allendorf, Mark D.
  • Silvestre-Albero, Joaquín
  • Forse, Alexander C.
  • Champness, Neil R.
  • Chapman, Karena W.
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
We are currently witnessing the dawn of hydrogen (H2) economy, where H2 will soon become a primary fuel for heating, transportation, and long-distance and long-term energy storage. Among diverse possibilities, H2 can be stored as a pressurized gas, a cryogenic liquid, or a solid fuel via adsorption onto porous materials. Metal–organic frameworks (MOFs) have emerged as adsorbent materials with the highest theoretical H2 storage densities on both a volumetric and gravimetric basis. However, a critical bottleneck for the use of H2 as a transportation fuel has been the lack of densification methods capable of shaping MOFs into practical formulations while maintaining their adsorptive performance. Here, we report a high-throughput screening and deep analysis of a database of MOFs to find optimal materials, followed by the synthesis, characterization, and performance evaluation of an optimal monolithic MOF (monoMOF) for H2 storage. After densification, this monoMOF stores 46 g L–1 H2 at 50 bar and 77 K and delivers 41 and 42 g L–1 H2 at operating pressures of 25 and 50 bar, respectively, when deployed in a combined temperature–pressure (25–50 bar/77 K → 5 bar/160 K) swing gas delivery system. This performance represents up to an 80% reduction in the operating pressure requirements for delivering H2 gas when compared with benchmark materials and an 83% reduction compared to compressed H2 gas. Our findings represent a substantial step forward in the application of high-density materials for volumetric H2 storage applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design and Synthesis of N-Doped Carbons as Efficient Metal-Free Catalysts in the Hydrogenation of 1-Chloro-4-Nitrobenzene

  • Villora-Picó, Juan José
  • Sepúlveda-Escribano, Antonio
  • Pastor-Blas, M. Mercedes
  • Pastor-Blas, M. Mercedes|||/items/26967561-b753-4471-b615-ceb0537ec40b
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Metal-free catalysts based on nitrogen-doped porous carbons were designed and synthesized from mixtures of melamine as nitrogen and carbon sources and calcium citrate as carbon source and porogen system. Considering the physicochemical and textural properties of the prepared carbons, a melamine/citrate ratio of 2:1 was selected to study the effect of the pyrolysis temperature. It was observed that a minimum pyrolysis temperature of 750 ◦C is required to obtain a carbonaceous structure. However, although there is a decrease in the nitrogen amount at higher pyrolysis temperatures, a gradual development of the porosity is produced from 750 ◦C to 850 ◦C. Above that temperature, a deterioration of the carbon porous structure is produced. All the prepared carbon materials, with no need for a further activation treatment, were active in the hydrogenation reaction of 1-chloro-4-nitrobenzene. A full degree of conversion was reached with the most active catalysts obtained from 2:1 melamine/citrate mixtures pyrolyzed at 850 ◦C and 900 ◦C, which exhibited a suitable compromise between the N-doping level and developed mesoporosity that facilitates the access of the reactants to the catalytic sites. What is more, all the materials showed 100% selectivity for the hydrogenation of the nitro group to form the corresponding chloro-aniline.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tuneable mesoporous silica material for hydrogen storage application via nano-confined clathrate hydrate construction

  • Ciocarlan, Radu-George
  • Farrando Pérez, Judit
  • Arenas-Esteban, Daniel
  • Houlleberghs, Maarten
  • Daemen, Luke L.
  • Cheng, Yongqiang
  • Ramírez-Cuesta, Anibal J.
  • Breynaert, Eric
  • Martens, Johan A.
  • Bals, Sara
  • Silvestre-Albero, Joaquín
  • Cool, Pegie
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
Safe storage and utilisation of hydrogen is an ongoing area of research, showing potential to enable hydrogen becoming an effective fuel, substituting current carbon-based sources. Hydrogen storage is associated with a high energy cost due to its low density and boiling point, which drives a high price. Clathrates (gas hydrates) are water-based (ice-like) structures incorporating small non-polar compounds such as H2 in cages formed by hydrogen bonded water molecules. Since only water is required to construct the cages, clathrates have been identified as a potential solution for safe storage of hydrogen. In bulk, pure hydrogen clathrate (H2O-H2) only forms in harsh conditions, but confined in nanospaces the properties of water are altered and hydrogen storage at mild pressure and temperature could become possible. Here, specifically a hydrophobic mesoporous silica is proposed as a host material, providing a suitable nano-confinement for ice-like clathrate hydrate. The hybrid silica material shows an important decrease of the pressure required for clathrate formation (approx. 20%) compared to the pure H2O-H2 system. In-situ inelastic neutron scattering (INS) and neutron diffraction (ND) provided unique insights into the interaction of hydrogen with the complex surface of the hybrid material and demonstrated the stability of nano-confined hydrogen clathrate hydrate.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Molecular sieving of linear and branched C6 alkanes by tannin-derived carbons

  • Castro-Gutiérrez, Jimena
  • Jardim, Erika de Oliveira
  • Canevesi, Rafael L.S.
  • Silvestre-Albero, Joaquín
  • Kriesten, Martin
  • Thommes, Matthias
  • Celzard, Alain
  • Fierro, Vanessa
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Two micro-mesoporous carbons (MMCs): a disordered mesoporous carbon (DMC) and an ordered mesoporous carbon (OMC), synthesized by an easy, low-cost, and green method are proposed as efficient hydrocarbon sieves for the separation of C6 isomers: n-hexane (nHEX), 2-methylpenthane (2 MP) and 2,2-dimethylbutane (22DMB). Their textural characterization reveals a highly interconnected pore network within the DMC, while a reverse hierarchy of ordered mesopores only accessible through narrow micropores is found in the OMC. The pore texture strongly affects their adsorption performance by kinetic and molecular sieving effects; the narrow constrictions in the OMC allow adsorption of nHEX and partially 2 MP but not 22DMB, whereas the highly connected pore network of DMC allows adsorption of the three isomers. Multi-component adsorption isotherms calculated from the single-component experimental results by ideal adsorbed solution theory (IAST) demonstrates that the OMC material has a remarkably high selectivity for the adsorption of nHEX and nHEX + 2 MP from binary and ternary mixtures, respectively. To the best of the authors’ knowledge, such behavior has never been reported so far for carbon materials. Hence, this study shows that tannin-derived MMCs have great potential to be used as an eco-friendly and low-cost alternative for the selective separation of di-branched C6 isomers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Activated carbon materials with a rich surface chemistry prepared from L-cysteine amino acid

  • Reljic, Snezana
  • Cuadrado-Collados, Carlos
  • Jardim, Erika de Oliveira
  • Farrando Pérez, Judit
  • Martinez-Escandell, Manuel
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
A series of activated carbon materials have been successfully prepared from a non-essential amino acid, such as L-cysteine. The synthesized carbons combine a widely developed porous structure (BET surface area up to 1000 m2/g) and a rich surface chemistry (mainly oxygen, nitrogen and sulphur functionalities). These surface functional groups are relatively stable even after a high temperature thermal treatment (O>N∼S). Experimental results show that these samples with a rich surface chemistry exhibit a significant improvement in their hydrophilic character. Although the role of the surface functional groups is less pronounced for the adsorption of non-polar molecules such as CO2, CH4 and C2H4, their adsorption at atmospheric pressure is to some extend conditioned by the characteristics of the adsorbent-adsorbate interactions. The synthesized carbons exhibit an excellent adsorption performance for CO2 (up to 3 mmol/g at 0°C). Furthermore, samples with a low activation degree exhibit molecular sieving properties with very promising CO2/CH4 (up to 4.5) and C2H4/CH4 (up to 6) selectivity ratios. These results anticipate that non-essential amino acids are a versatile platform to obtain carbon materials combining a tailored porous structure and rich multifunctional surface chemistry and with potential application for gas adsorption/separation processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Advanced Removal of Dyes with Tuning Carbon/TiO2 Composite Properties

  • Yankovych, Halyna Bodnar
  • Abreu-Jaureguí, Coset
  • Farrando Pérez, Judit
  • Melnyk, Inna
  • Václavíková, Miroslava
  • Silvestre-Albero, Joaquín
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
This study evaluates the removal of several dyes with different charge properties, i.e., anionic (Acid Red 88), cationic (Basic Red 13), and neutral (Basic Red 5) using transition metal-doped TiO2 supported on a high-surface-area activated carbon. Experimental results confirm the successful deposition of TiO2 and the derivatives (Zr-, Cu-, and Ce-doped samples) on the surface of the activated carbon material and the development of extended heterojunctions with improved electronic properties. Incorporating a small percentage of dopants significantly improves the adsorption properties of the composites towards the three dyes evaluated, preferentially for sample AC/TiO2_Zr. Similarly, the photodegradation efficiency highly depends on the nature of the composite evaluated and the characteristics of the dye. Sample AC/TiO2_Zr demonstrates the best overall removal efficiency for Acid Red 88 and Basic Red 5—83% and 63%, respectively. This promising performance must simultaneously be attributed to a dual mechanism, i.e., adsorption and photodegradation. Notably, the AC/TiO2_Ce outperformed the other catalysts in eliminating Basic Red 13 (74%/6 h). A possible Acid Red 88 degradation mechanism using AC/TiO2_Zr was proposed. This study shows that the removal efficiency of AC/TiO2 composites strongly depends on both the material and pollutant.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Doped activated carbons obtained from nitrogen and sulfur-containing polymers as metal-free catalysts for application in nitroarenes hydrogenation

  • Villora-Picó, Juan José
  • Gil-Muñoz, Gema
  • Sepúlveda-Escribano, Antonio
  • Pastor-Blas, M. Mercedes
  • Gil-Muñoz, Gema|||/items/0788cd82-745f-472c-89b5-df98e6198f59
  • Pastor-Blas, M. Mercedes|||/items/26967561-b753-4471-b615-ceb0537ec40b
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Activated carbons doped with nitrogen and/or sulfur have been obtained by pyrolysis followed of steam activation of a sulfur containing polymer (polythiophene) and two nitrogen-containing polymers (polyaniline and polypyrrole). These polymers were synthesized by oxidative chemical polymerization in aqueous media of their corresponding monomers. The influence of the steam activation on the textural properties and surface chemistry of the carbons has been evaluated and their catalytic activity has been determined in the hydrogenation reaction of 1-chloro-4-nitrobenzene. The degree of conversion in the reaction depends on the development of adequate porosity in the activated carbon (which is determined by the activation conditions) together with the presence of heteroatoms that act as active catalytic sites, with S showing considerably greater effectiveness than N. A compromise between an acceptable level of doping with sulfur and an adequate porosity is necessary, which has been achieved in a carbon obtained from polythiophene pyrolyzed at 900 °C and steam activated at 800 °C for 4 h, with a specific surface area of 742 m2/g and S content of 1.71 at%.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

N-Doped Activated Carbons from Polypyrrole – Effect of Steam Activation Conditions

  • Villora-Picó, Juan José
  • Pastor-Blas, M. Mercedes
  • Sepúlveda-Escribano, Antonio
  • Pastor-Blas, M. Mercedes|||/items/26967561-b753-4471-b615-ceb0537ec40b
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Polypyrrole (PPy) has been prepared by oxidative polymerization of pyrrole and used as a raw material for the preparation of N-doped activated carbons. Thus, PPy has been pyrolyzed at 900 °C and then activated with steam under different activation conditions (time and temperature). This has allowed for the preparation of activated carbons with different porosity development and nitrogen content, as well as distinctive distribution of nitrogen species. It has been observed that the presence of nitrogen functionalities favors water adsorption at low relative pressures but, at relative pressures higher than 0.5 it is determined by the porosity development.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Zr-Porphyrin Metal–Organic Framework as nanoreactor for boosting the formation of hydrogen clathrates

  • Carrillo-Carrión, Carolina
  • Farrando Pérez, Judit
  • Daemen, Luke L.
  • Cheng, Yongqiang
  • Ramírez-Cuesta, Anibal J.
  • Silvestre-Albero, Joaquín
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
We report the first experimental evidence for rapid formation of hydrogen clathrates under mild pressure and temperature conditions within the cavities of a zirconium-metalloporphyrin framework, specifically PCN-222. PCN-222 has been selected for its 1D mesoporous channels, high water-stability, and proper hydrophilic behavior. Firstly, we optimize a microwave (MW)-assisted method for the synthesis of nanosized PCN-222 particles with precise structure control (exceptional homogeneity in morphology and crystalline phase purity), taking advantage of MW in terms of rapid/homogeneous heating, time and energy savings, as well as potential scalability of the synthetic method. Second, we explore the relevance of the large mesoporous 1D open channels within the PCN-222 to promote the nucleation and growth of confined hydrogen clathrates. Experimental results show that PCN-222 drives the nucleation process at a lower pressure than the bulk system (1.35 kbar vs 2 kbar), with fast kinetics (minutes), using pure water, and with a nearly complete water-to-hydrate conversion. Unfortunately, PCN-222 cannot withstand these high pressures, which lead to a significant alteration of the mesoporous structure while the microporous network remains mainly unchanged.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Recycling of Tetra pak wastes via pyrolysis: Characterization of solid products and application of the resulting char in the adsorption of mercury from water

  • Zúñiga-Muro, Ninfa M.
  • Bonilla-Petriciolet, Adrian
  • Mendoza-Castillo, Didilia I.
  • Duran-Valle, Carlos J.
  • Silvestre-Albero, Joaquín
  • Reynel-Avila, Hilda E.
  • Tapia-Picazo, Juan Carlos
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
This paper provides a detailed analysis of the recycling of Tetra Pak waste via pyrolysis to recover the most valuable solid products within its composition, char and aluminum, and the subsequent application of the char in the adsorption of mercury in aqueous solutions. The impact of the Tetra Pak pyrolysis conditions on the char and aluminum yields and their associated properties have been analyzed using a variety of physico-chemical techniques. Tetra Pak-derived chars showed outstanding mercury adsorption properties (up to 215.7 mg/g) that can be attributed to the heterogeneous surface chemistry composed mainly by oxygenated functional groups associated to C, Ca, Al and Si. Tetra Pak pyrolysis allowed an effective recovery of aluminum at pyrolysis temperatures of 600 and 800 °C. Higher temperatures, up to 1000 °C, promote its oxidation to aluminum oxide and hydroxide. These findings contribute to increase the versatility in the Tetra Pak reuse to develop new adsorbents with promising performance for water treatment and the associated recovery of aluminum for further industrial applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Catalytic synergy: N,P modification of activated carbon for improved 1-chloro-4-nitrobenzene reduction

  • Duran-Uribe, Edgar S.
  • Sepúlveda-Escribano, Antonio
  • Ramos-Fernández, Enrique V.
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Carbon materials have emerged as a new generation of catalysts for the crucial industrial hydrogenation of nitroarenes. Activated carbon, known for its cost-effectiveness and facile modifiability, stands out among various carbon materials. This study focuses on the preparation of N and P co-doped carbons for catalysing the hydrogenation of 1-chloro-4-nitrobenzene. Comprehensive characterisation using thermal analysis (TGA-MS), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, N2 adsorption at -196 ºC, and ICP-MS was performed. The synergistic effect of N and P was evident, with co-doped carbons outperforming their mono-doped counterparts, underscoring the significance of nitrogen. N,P-codoped activated carbon emerges as a promising, active, stable, and selective metal-free catalyst for the hydrogenation of 1-chloro-4-nitrobenzene, leading to 4-chloroaniline.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ambient pressure storage of high-density methane in nanoporous carbon coated with graphene

  • Wang, Shuwen
  • Vallejos-Burgos, Fernando
  • Furuse, Ayumi
  • Otsuka, Hayato
  • Nagae, Miu
  • Kawamata, Yuma
  • Ohba, Tomonori
  • Kanoh, Hirofumi
  • Urita, Koki
  • Notohara, Hiroo
  • Moriguchi, Isamu
  • Tanaka, Hideki
  • Marco Lozar, Juan Pablo
  • Silvestre-Albero, Joaquín
  • Hayashi, Takuya
  • Kaneko, Katsumi
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Storage and transportation of methane (CH4) remains challenging as it cannot be liquefied at ambient temperature and instead must be stored as compressed gas at high pressures (approximately 25 MPa). Alternatively, it can be stored within nanoporous materials at moderate pressures (for example, 3.5 MPa) but this ‘adsorbed natural gas’ approach can suffer from substantial desorption with only minor temperature increases. Both methods therefore necessitate additional safety measures. Here we report graphene-coated porous carbon materials that can be charged with CH4 at high pressure and retain it at ambient pressure and temperature (below 318 K), thereby enhancing storage safety. Our data suggest that graphene serves as a thermally controllable lock that obstructs or activates pores to trap or release CH4, enabling a pressure-equivalent loading of 19.9 MPa at 298 K, and release upon heating to 473 K. The resulting reversible CH4 volumetric capacity reaches 142 v/v, exceeding that of various adsorbed natural gas materials at 3.5 MPa and 298 K when considering container space utilization.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Heteroatom-Engineered SWCNT/TiO2 Heterojunctions for Enhanced Photocatalytic Charge Transfer and Pollutant Photodegradation

  • Abreu-Jaureguí, Coset
  • Ania, Conchi O.
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Semiconductor/carbon heterojunctions are powerful photocatalysts for environmental remediation; however, the link between the interfacial characteristics of both components (e.g., presence of surface functionalities) and photocatalytic performance remains insufficiently understood. This study investigates TiO2/carbon heterojunctions formed on surface-functionalized single-walled carbon nanotubes (sf-SWCNTs), focusing on how heteroatom doping (-O, -N, -P) of the carbon material modulates the heterojunction's photocatalytic properties. The structural analysis of the materials confirmed the formation of the heterojunction, characterized by the crystalline fingerprint of TiO2 and the graphitic lattice of the sf-SWCNTs. The surface chemistry analysis identified carboxyl/anhydride, pyridinic/pyrrolic nitrogen, and COPO3/CPO3 groups as key surface functionalities of the heterojunctions, leading to enhanced visible-light absorption and charge-carrier separation. The photocatalytic tests for the degradation of a model cationic organic pollutant highlighted TiO2/O-SWCNT as the most efficient photocatalyst to achieve degradation within 2 h, while maintaining high activity across multiple continuous cycles and facile regeneration. Scavenger studies revealed that surface functionalization promotes interfacial charge transfer, favoring both radical-mediated and direct hole oxidation pathways. Overall, this study outlines the role of heteroatom functionalities in tailoring the optical and electronic properties of TiO2/carbon heterojunctions, ultimately providing valuable insights for the rational design of advanced photocatalysts.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monolithic Zirconium-Based Metal-Organic Frameworks for Energy-Efficient Water Adsorption Applications

  • Çamur, Ceren
  • Babu, Robin
  • Suárez, José Antonio
  • Rampal, Nakul
  • Pérez-Carvajal, Javier
  • Hügenell, Philipp
  • Ernst, Sebastian-Johannes
  • Silvestre‐Albero, Joaquín
  • Imaz, Inhar
  • Madden, David
  • Maspoch, Daniel
  • Fairen-Jiménez, David
Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO2 emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal-organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH2 , and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed-solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm-3 without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C)., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC (EP/S009000/1). N.R. acknowledges support from the Cambridge International Scholarship and the Trinity Henry-Barlow Scholarship (honorary). D.F.-J. thanks the Royal Society for funding through a University Research Fellowship., J.S.A. would like to acknowledge financial support from Ministerio de Ciencia e Innovación (Project PID2019-108453GB-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zr-Porphyrin Metal-Organic Framework as nanoreactor for boosting the formation of hydrogen clathrates

  • Carrillo-Carrión, Carolina
  • Farrando-Pérez, Judit
  • Daemen, Luke L
  • Cheng, Yongqiang Q
  • Ramirez-Cuesta, Anibal J
  • Silvestre-Albero, Joaquín
Chemicals and CAS Registry Numbers hydrogen 12385-13-6, 1333-74-0 porphyrin 24869-67-8 water 7732-18-5 zirconium 14940-68-2, 7440-67-7, We report the first experimental evidence for rapid formation of hydrogen clathrates under mild pressure and temperature conditions within the cavities of a zirconium-metalloporphyrin framework, specifically PCN-222. PCN-222 has been selected for its 1D mesoporous channels, high water-stability, and proper hydrophilic behavior. Firstly, we optimize a microwave (MW)-assisted method for the synthesis of nanosized PCN-222 particles with precise structure control (exceptional homogeneity in morphology and crystalline phase purity), taking advantage of MW in terms of rapid/homogeneous heating, time and energy savings, as well as potential scalability of the synthetic method. Second, we explore the relevance of the large mesoporous 1D open channels within the PCN-222 to promote the nucleation and growth of confined hydrogen clathrates. Experimental results show that PCN-222 drives the nucleation process at a lower pressure than the bulk system (1.35 kbar vs 2 kbar), with fast kinetics (minutes), using pure water, and with a nearly complete water-to-hydrate conversion. Unfortunately, PCN-222 cannot withstand these high pressures, which lead to a significant alteration of the mesoporous structure while the microporous network remains mainly unchanged., Authors would like to acknowledge financial support from Ministerio de Ciencia e Innovación (Project PID2019-108453GB-C21 and PID2022-141034OB-C22), Consejo Superior de Investigaciones Científicas (CSIC) for internal funds (Intramural project, 202280I170), and Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital (Project CIPROM/2021/022). A portion of this research used resources at the Spallation Neutron Source, a DOE Office of Science User Facility operated by the Oak Ridge National Laboratory (project IPTS-29742.1)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monolithic Zirconium-Based Metal-Organic Frameworks for Energy-Efficient Water Adsorption Applications

  • Camur, Ceren|||0000-0002-4475-0511
  • Babu, Robin
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Rampal, Nakul
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Hügenell, Philipp
  • Ernst, Sebastian-Johannes
  • Silvestre-Albero, Joaquin|||0000-0002-0303-0817
  • Imaz, Inhar|||0000-0002-0278-1141
  • Madden, David G.
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Fairen-Jimenez, David|||0000-0002-5013-1194
Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal-organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH, and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed-solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C).