Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ni-Phosphide catalysts as versatile systems for gas-phase CO2 conversion: Impact of the support and evidences of structure-sensitivity

  • Zhang, Qi
  • Pastor Pérez, Laura
  • Villora-Picó, Juan José
  • Joyce, Miriam
  • Sepúlveda-Escribano, Antonio
  • Duyar, Melis S.
  • Ramírez Reina, Tomás
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
We report for the first time the support dependent activity and selectivity of Ni-rich nickel phosphide catalysts for CO2 hydrogenation. New catalysts for CO2 hydrogenation are needed to commercialise the reverse water–gas shift reaction (RWGS) which can feed captured carbon as feedstock for traditionally fossil fuel-based processes, as well as to develop flexible power-to-gas schemes that can synthesise chemicals on demand using surplus renewable energy and captured CO2. Here we show that Ni2P/SiO2 is a highly selective catalyst for RWGS, producing over 80% CO in the full temperature range of 350–750 °C. This indicates a high degree of suppression of the methanation reaction by phosphide formation, as Ni catalysts are known for their high methanation activity. This is shown to not simply be a site blocking effect, but to arise from the formation of a new more active site for RWGS. When supported on Al2O3 or CeAl, the dominant phase of as synthesized catalysts is Ni12P5. These Ni12P5 catalysts behave very differently compared to Ni2P/SiO2, and show activity for methanation at low temperatures with a switchover to RWGS at higher temperatures (reaching or approaching thermodynamic equilibrium behaviour). This switchable activity is interesting for applications where flexibility in distributed chemicals production from captured CO2 can be desirable. Both Ni12P5/Al2O3 and Ni12P5/CeAl show excellent stability over 100 h on stream, where they switch between methanation and RWGS reactions at 50–70% conversion. Catalysts are characterized before and after reactions via X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), temperature-programmed reduction and oxidation (TPR, TPO), Transmission Electron Microscopy (TEM), and BET surface area measurement. After reaction, Ni2P/SiO2 shows the emergence of a crystalline Ni12P5 phase while Ni12P5/Al2O3 and Ni12P5/CeAl both show the crystalline Ni3P phase. While stable activity of the latter catalysts is demonstrated via extended testing, this Ni enrichment in all phosphide catalysts shows the dynamic nature of the catalysts during operation. Moreover, it demonstrates that both the support and the phosphide phase play a key role in determining selectivity towards CO or CH4.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of the Carbon Support and Conditions on the Carbothermal Synthesis of Cu-Molybdenum Carbide and Its Application on CO2 Hydrogenation to Methanol

  • Dongil, Ana Belén
  • Blanco, Elodie
  • Villora-Picó, Juan José
  • Sepúlveda-Escribano, Antonio
  • Rodríguez-Ramos, Inmaculada
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
The synthesis of methanol by carbon dioxide hydrogenation has been studied using copper-molybdenum carbides supported on high surface area graphite, reduced graphene oxide and carbon nanotubes. The synthesis conditions and the effect of the support were studied. The catalysts were prepared in situ using H2 or He at 600 °C or 700 °C. Both molybdenum carbide and oxycarbide were obtained. A support with less reactive carbon resulted in lower proportion of carbide obtained. The best results were achieved over a 5 wt.% Cu and 10 wt.% Mo on high surface area graphite that reached 96.3% selectivity to methanol.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coffee Pulp Gasification for Syngas Obtention and Methane Production Simulation Using Ni Catalysts Supported on Al2O3 and ZrO2 in a Packed Bed Reactor

  • Aristizábal-Alzate, Carlos Esteban
  • Dongil, Ana Belén
  • Romero-Sáez, Manuel
The methanation of CO2 is of great interest in power-to-gas systems and contributes to the mitigation of climate change through carbon dioxide capture and the subsequent production of high-added-value products. This study investigated CO2 methanation with three Ni catalysts supported on Al2O3 and ZrO2, which were simulated using a mathematical model of a packed bed reactor designed based on their chemical kinetics reported in the literature. The simulated reactive system was fed with syngas obtained from residual coffee pulp obtained after a solvent phytochemical extraction process under several gasification conditions. The results reflect a high degree of influence of the catalyst support, preparation method, and syngas composition on CO2 and H2 conversions and CH4 selectivity. For all the syngas compositions, the Ni/ZrO2 catalysts showed the best values for CO2 conversion and H2 conversion for the Ni/Al2O3 catalyst except in gasification at 700 °C and using the Ni/ZrO2p catalyst., The authors thank the financial support given by the European Commission through the H2020-MSCA-RISE-2020 BIOALL project (Grant Agreement: 101008058), Instituto Tecnológico Metropolitano de Medellín and Instituto de Catálisis y Petroleoquímica—CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multicomponent graphene based catalysts for guaiacol upgrading in hydrothermal conditions: Exploring "H2-free" alternatives for bio-compounds hydrodeoxygenation

  • Parrilla-Lahoz, Silvia
  • Jin, W.
  • Pastor-Pérez, Laura
  • Duyar, M. S.
  • Martínez Quintana, Laura
  • Dongil, Ana Belén
  • Ramírez-Reina, Tomás
Catalytic hydrodeoxygenation (HDO) is a critical technique for upgrading biomass derivatives to deoxygenated fuels or other high-value compounds. Phenol, guaiacol, anisole, p-cresol, m-cresol and vanillin are all monomeric phenolics produced from lignin. Guaiacol is often utilised as a model lignin compound to deduce mechanistic information about the bio-oil upgrading process. Typically, a source of H2 is supplied as reactant for the HDO reaction. However, the H2 supply, due to the high cost of production and additional safety precautions needed for storage and transportation, imposes significant economic infeasibilities on the HDO process's scaling up. We investigated a novel H2-free hydrodeoxygenation (HDO) reaction of guaiacol at low temperatures and pressures, using water as both a reaction medium and hydrogen source. A variety of Ni catalysts supported on zirconia/graphene/with/without nitrogen doping were synthesised and evaluated at 250 °C and 300 °C in a batch reactor, with the goal of performing a multi-step tandem reaction including water splitting followed by HDO. The catalysts were characterised using H2-TPR, XRD, TEM and XPS to better understand the physicochemical properties and their correlation with catalytic performance of the samples in the HDO process. Indeed, our NiZr2O/Gr-n present the best activity/selectivity balance and it is deemed as a promising catalyst to conduct the H2-free HDO reaction. The catalyst reached commendable conversion levels and selectivity to mono-oxygenated compounds considering the very challenging reaction conditions. This innovative HDO approach provides a new avenue for cost-effective biomass upgrading., Financial support for this work has been obtained from Junta de Andalucia project P20-00667, co-funded by the European Union FEDER. This work is also sponsored by the Spanish Ministry of Science and Innovation through the projects PID2019-108502RJ-I00 and grant IJC2019- 040560-I both funded by MCIN/AEI/10.13039/501100011033 as well as RYC2018-024387-I funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Financial support from the European Commission through the H2020-MSCA-RISE-2020 BIOALL project (Grant Agreement: 101008058) and RYC2020-030626-I (MCIN) and project 20228AT002 (CSIC) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous Phase Hydrogenation of 4-(2-Furyl)-3-buten-2-one over Different Re Phases

  • Díaz, Claudio Ignacio C.
  • Araya-López, Claudio
  • Dongil, Ana Belén
  • Escalona, Néstor
4-(2-furyl)-3-buten-2-one (FAc) is obtained by aldol condensation of furfural and acetone and has been used in hydrodeoxygenation reactions to obtain fuel products using noble metal catalysts. The hydrogenation of FAc in the aqueous phase using metallic- and Re oxide-supported catalysts on graphite was studied, within a temperature range of 200–240 °C, in a batch reactor over a 6 h reaction period. The catalysts were characterized using N2 adsorption–desorption, TPR-H2, TPD-NH3, XRD, and XPS analyses. Catalytic reactions revealed that metallic rhenium and rhenium oxide-supported catalysts are active for the hydrogenation and Piancatelli rearrangement of FAc. Notably, metallic rhenium exhibited a fourfold higher initial rate than rhenium oxide, which was attributed to the higher dispersion of Re in the Re/G catalyst over graphite. Re/G and ReOx/G catalysts tended to rearrange and hydrogenate FAc to 2-(2-oxopropyl)cyclopenta-1-one in water., This research was funded by the following sources: C.C.D. was funded by Agencia Nacional de Investigacion y Desarrollo (ANID), Chile through doctoral grant 2021-(grant No. 21211077); A.B.D. was funded by BIOALL Project E.U.H2020-MSCA Nº 101008058. Fondequip No. EQM160070; N.E.B. was funded by The Millennium Science Initiative Program-NCN2021_090, FONDECYT regular (Grant No. 1220763) and C.A.L. was funded by ANID, Chile, through FONDECYT Postdoctoral (Project3220395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integration of Design of Experiments, Analysis of Variance and Response Surface Methodology in Assessing Heterogeneous Catalysts Processes: A Minireview

  • Aristizábal-Alzate, Carlos Esteban
  • Castillejos-López, Eva
  • Dongil, Ana Belén
  • Romero-Sáez, Manuel
This work reviews the application of Analysis of Variance (ANOVA), Design of Experiments (DOE), and Response Surface Methodology (RSM) in heterogeneous catalysis, based on an analysis of recent scientific literature. Heterogeneous catalysis plays a key role in various industries, guiding chemical reactions, optimizing the performance of different processes and/or prioritizing products, and ANOVA, DOE and RSM are valuable tools to understand the intricate relationships between catalyst properties, process variables and reaction responses. This understanding facilitates improvements in catalysts performance and selectivity, thereby optimizing processes. Drawing insights from recent studies, this minireview highlights the different applications of ANOVA-based experimental designs and RSM optimization techniques in catalytic process evaluation. Therefore, this review provides valuable insights into these current statistical methodologies applied to heterogeneous catalysis research, informing the relevance and future directions of the research in the field., The authors thank the financial support given by the European Commission through the H2020-MSCA-RISE-2020 BIOALL project (Grant Agreement: 101008058), Instituto Tecnológico Metropolitano and Instituto de Catálisis y Petroleoquímica-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methanol Production from Residual Coffee Pulp Gasification Using Cu/Zno/Al2O3 Catalyst: Simulation and ANOVA Assessment

  • Aristizábal-Alzate, Carlos Esteban
  • Dongil, Ana Belén
  • Romero-Sáez, Manuel
Methanol is considered a key and platform compound to produce high value-added chemicals, and it could contribute to energy transition, decreasing the dependence of fossil fuels. This paper presents a methanol synthesis simulation over a commercial Cu/ZnO/Al2O3, which is used at industrial scale. With the aim of exploring renewable raw materials as alternative to synthesize this alcohol, synthesis gas was obtained as a starting mixture from gasification of residual coffee pulp, which is an agro-industrial waste widely generated in coffee producing countries. Currently, the raw materials most used to obtain methanol are natural gas and coal, so the use of agro-industrial waste as a raw material would achieve greener methanol production. Design of experiments and ANOVA were applied to obtain results with statistical significance. Residual coffee pulp gasification conditions and reaction temperature were the controlled variables, while methanol production was selected as a response one. The simulation runs and ANOVA were analyzed and compared with the literature reports, and it was observed that methanol production is possible avoiding the catalyst deactivation. For the best obtained conditions, the profiles along the reactor of chemical species molar fraction, stochiometric number, methanol production and pressure drop were shown., The authors thank the financial support given by the European Commission through the H2020-MSCA-RISE-2020 BIOALL project (Grant Agreement: 101008058), Instituto Tecnológico Metropolitano and Instituto de Catálisis y Petroleoquímica – CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Liquid Phase Catalytic Transfer Hydrogenation of Crotonaldehyde over ReOx-Supported Catalysts Using Formic Acid as In Situ Hydrogen Donor

  • Aristizábal-Alzate, Carlos Esteban
  • Naharro Ovejero, Verónica
  • Romero-Sáez, Manuel
  • Dongil, Ana Belén
This article belongs to the Special Issue Recent Advances on Biomass Conversion and CO2 Valorization: Steeping Towards a Circular Economy, 2nd Edition., The selective hydrogenation of the C=O bond over the C=C bond in α,β-unsaturated aldehydes remains a well-known challenge. This work investigates the liquid-phase catalytic transfer hydrogenation of crotonaldehyde to crotyl alcohol over ReOx-based catalysts, using formic acid (FA) as an in situ hydrogen donor. A series of 10 wt% Re catalysts supported on G200, g-C3N4, TiO2, and ZrO2 were synthesized and tested in a batch reactor at 20 bar and temperatures of 140–180 °C. Catalysts were characterized by XRD, BET, NH3-TPD, and XPS to correlate their physicochemical properties with catalytic behavior. Among the studied materials, ReOx/ZrO2 and ReOx/g-C3N4 exhibited the highest crotyl alcohol selectivity above 57% for all reaction temperatures, evaluated at crotonaldehyde conversion of 25%. The nature of the support strongly influenced the dispersion and oxidation state of Re species, as well as the surface acidity, which governed the activation of both the carbonyl group and the FA decomposition. Compared with molecular hydrogen, FA improved both conversion and selectivity due to its superior hydrogen-donating ability in the aqueous phase. These findings demonstrate that tailoring the acid–base characteristics of ReOx catalysts and employing biomass-derived hydrogen donors represent an effective strategy for selective hydrogenation of α,β-unsaturated aldehydes., The authors are thankful for the financial support given by the European Commission through the H2020-MSCA-RISE-2020 BIOALL project (Grant Agreement: 101008058), Instituto Tecnológico Metropolitano de Medellín, and Instituto de Catálisis y Petroleoquímica—CSIC (20228AT002)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Induction heating applied to anisole HDO using formic acid as a hydrogen source

  • Naharro-Ovejero, Verónica
  • Dhanjani, Mónica
  • Salas, Gorka
  • Dongil, Ana Belén
Supplementary information is available. See DOI: https://doi.org/10.1039/d5cy00707k., Magnetically induced heating catalysis using encapsulated magnetic nanoparticles as heating agents presents itself as a new efficient method for carrying out high-temperature reactions. In this work, magnetic Fe, Co, and FeCo nanoparticles encapsulated in carbon were synthesized using various methods. Rhenium oxide supported on high-surface-area graphite was used as a catalyst for the gas-phase HDO reaction of anisole, a model molecule for HDO studies of biomass-derived compounds. Characterization confirmed the formation of metallic nanoparticles, the alloying of FeCo and the successful coating with a graphitic-like carbon film around the NPs, resulting in core-shell type materials. According to the catalytic results, the activity and the selectivity were similar when using formic acid (FA) or hydrogen (H2). Furthermore, by comparing the use of conventional and magnetic heating, it was concluded that carbon encapsulation is an effective strategy to generate a bed that heats but does not catalyze. The ReO x catalyst stood out for its capacity to break the OCH3 bond, forming benzene as the major product. Among the different MNPs, FeCo@CHT presented the best properties and performance., This investigation received financial support from the European Commission through the H2020-MSCA-RISE-2020 BIOALL project (Grant Agreement: 101008058) and Project TED2021-130525A-I00 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence (Ministerio de Ciencia e Innovación, CEX2020-001039-S)., Peer reviewed, Sin uso de modelos vivos