Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rodríguez Navarro, Jorge Andrés|||0000-0002-8359-0397
This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC IAA (IAA/RG85685). N.R. acknowledges the support of the Cambridge International Scholarship and the TrinityHenry Barlow Scholarship (Honorary). O.K.F. and R.Q.S. acknowledge funding from the U.S. Department of Energy (DE-FG02-08ER15967). R.S.F. and D.B. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (SCoTMOF), ERC-2015-StG 677289. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. The authors gratefully acknowledge funding from the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, through the Hydrogen Storage Materials Advanced Research Consortium (HyMARC). This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government. J.D.E. acknowledges the support of the Alexander von Humboldt Foundation and the Center for Information Services and High Performance Computing (ZIH) at TU Dresden. S.K.G. and S.M. acknowledge SERB (Project No. CRG/2019/000906), India for financial support. K.K. and R.K. acknowledge Active Co. Research Grant for funding. S.K. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (COSMOS), ERC-2017-StG 756489. N.L. and J.G.M acknowledge funding from the European Commission through the H2020-MSCA-RISE-2019 program (ZEOBIOCHEM -872102) and the Spanish MICINN and AEI/FEDER (RTI2018-099504-B-C21). N.L. thanks the University of Alicante for funding (UATALENTO17-05). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) S.M.J.R. and A.L. wish to thank the Fund for Scientific Research Flanders (FWO), under grant nos. 12T3519N and 11D2220N. L.S. was supported by the EPSRC Cambridge NanoDTC EP/L015978/1. C.T.Y. and T.S.N. acknowledges funds from the National Research Foundation of Korea, NRF-2017M3A7B4042140 and NRF-2017M3A7B4042235. P.F. and H. Y. acknowledge US Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Award No. DE-SC0010596 (P.F.). R.O. would like to acknowledge funding support during his Ph.D. study from Indonesian Endowment Fund for Education-LPDP with the contract No. 202002220216006. Daniel Siderius: Official contribution of the National Institute of Standards and Technology (NIST), not subject to copyright in the United States of America. Daniel Siderius: Certain commercially available items may be identified in this paper. This identification does not imply recommendation by NIST, nor does it imply that it is the best available for the purposes described. B.V.L, S.T.E and A.M.P acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement no. 639233, COFLeaf)., Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of microand mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This roundrobin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., European Research Council (ERC) ERC-2016-COG 726380 ERC-2015-StG 677289 ERC-2017-StG 756489 639233, UK Research & Innovation (UKRI) Innovate UK 104384 UK Research & Innovation (UKRI), Engineering & Physical Sciences Research Council (EPSRC) IAA/RG85685, Cambridge International Scholarship TrinityHenry Barlow Scholarship, United States Department of Energy (DOE) DE-FG02-08ER15967, National Nuclear Security Administration DE-NA-0003525, United States Department of Energy (DOE), Alexander von Humboldt Foundation, Center for Information Services and High Performance Computing (ZIH) at TU Dresden, Department of Science & Technology (India), Science Engineering Research Board (SERB), India CRG/2019/000906, Active Co. Research Grant, European Commission through the H2020-MSCA-RISE-2019 program ZEOBIOCHEM -872102, Spanish MICINN and AEI/FEDER RTI2018-099504-B-C21, University of Alicante UATALENTO17-05, Spanish Government SEV-2017-0706 FWO 12T3519N 11D2220N, UK Research & Innovation (UKRI), Engineering & Physical Sciences Research Council (EPSRC) EP/L015978/1, National Research Foundation of Korea NRF-2017M3A7B4042140 NRF-2017M3A7B4042235, United States Department of Energy (DOE) DE-SC0010596, Indonesian Endowment Fund for Education-LPDP 202002220216006
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Monolithic metal–organic frameworks for carbon dioxide separation

  • Madden, David G.
  • Babu, Robin
  • Çamur, Ceren
  • Rampal, Nakul
  • Silvestre-Albero, Joaquín
  • Curtin, Teresa
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Carbon dioxide (CO2) is both a primary contributor to global warming and a major industrial impurity. Traditional approaches to carbon capture involve corrosive and energy-intensive processes such as liquid amine absorption. Although adsorptive separation has long been a promising alternative to traditional processes, up to this point there has been a lack of appropriate adsorbents capable of capturing CO2 whilst maintaining low regeneration energies. In the context of CO2 capture, metal–organic frameworks (MOFs) have gained much attention in the past two decades as potential materials. Their tuneable nature allows for precise control over the pore size and chemistry, which allows for the tailoring of their properties for the selective adsorption of CO2. While many candidate materials exist, the amount of research into material shaping for use in industrial processes has been limited. Traditional shaping strategies such as pelletisation involve the use of binders and/or mechanical processes, which can have a detrimental impact on the adsorption properties of the resulting materials or can result in low-density structures with low volumetric adsorption capacities. Herein, we demonstrate the use of a series of monolithic MOFs (monoUiO-66, monoUiO-66-NH2 & monoHKUST-1) for use in gas separation processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Monolithic Zirconium-Based Metal–Organic Frameworks for Energy-Efficient Water Adsorption Applications

  • Çamur, Ceren
  • Babu, Robin
  • Suárez del Pino, Jose A.
  • Rampal, Nakul
  • Pérez Carvajal, Javier
  • Hügenell, Philipp
  • Ernst, Sebastian-Johannes
  • Silvestre-Albero, Joaquín
  • Imaz, Inhar
  • Madden, David G.
  • Maspoch, Daniel
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO2 emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal–organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH2, and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed—solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm−3 without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sol-gel processing of a covalent organic framework for the generation of hierarchically porous monolithic adsorbents

  • Carrington, Mark E.
  • Rampal, Nakul
  • Madden, David G.
  • O’Nolan, Daniel
  • Casati, Nicola Pietro Maria
  • Divitini, Giorgio
  • Martín-Illán, Jesús Á.
  • Tricarico, Michele
  • Cepitis, Ritums
  • Çamur, Ceren
  • Curtin, Teresa
  • Silvestre-Albero, Joaquín
  • Tan, Jin-Chong
  • Zamora, Félix
  • Taraskin, Sergei
  • Chapman, Karena W.
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Covalent organic frameworks (COFs) have emerged as a versatile material platform for such applications as chemical separations, chemical reaction engineering, and energy storage. Their inherently low mechanical stability, however, frequently renders existing methods of pelletization ineffective, contributing to pore collapse, pore blockage, or insufficient densification of crystallites. Here, we present a process for the shaping and densifying of COFs into robust centimeter-scale porous monoliths without the need for templates, additives, or binders. This process minimizes mechanical damage from shear-induced plastic deformation and further provides a network of interparticle mesopores that we exploit in accessing analyte capacities above those achievable from the intrinsic COF structure. Using a lattice-gas model, we accurately capture the monolithic structure across the mesoporous range and tie pore architecture to performance in both gas-storage and -separation applications. Collectively, these results represent a substantial step in the practical applicability of COFs and other mechanically weak porous materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Densified HKUST-1 Monoliths as a Route to High Volumetric and Gravimetric Hydrogen Storage Capacity

  • Madden, David G.
  • O’Nolan, Daniel
  • Rampal, Nakul
  • Babu, Robin
  • Çamur, Ceren
  • Al Shakhs, Ali N.
  • Zhang, Shi-Yuan
  • Rance, Graham A.
  • Perez, Javier
  • Casati, Nicola Pietro Maria
  • Cuadrado-Collados, Carlos
  • O’Sullivan, Denis
  • Rice, Nicholas P.
  • Gennett, Thomas
  • Parilla, Philip
  • Shulda, Sarah
  • Hurst, Katherine E.
  • Stavila, Vitalie
  • Allendorf, Mark D.
  • Silvestre-Albero, Joaquín
  • Forse, Alexander C.
  • Champness, Neil R.
  • Chapman, Karena W.
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
We are currently witnessing the dawn of hydrogen (H2) economy, where H2 will soon become a primary fuel for heating, transportation, and long-distance and long-term energy storage. Among diverse possibilities, H2 can be stored as a pressurized gas, a cryogenic liquid, or a solid fuel via adsorption onto porous materials. Metal–organic frameworks (MOFs) have emerged as adsorbent materials with the highest theoretical H2 storage densities on both a volumetric and gravimetric basis. However, a critical bottleneck for the use of H2 as a transportation fuel has been the lack of densification methods capable of shaping MOFs into practical formulations while maintaining their adsorptive performance. Here, we report a high-throughput screening and deep analysis of a database of MOFs to find optimal materials, followed by the synthesis, characterization, and performance evaluation of an optimal monolithic MOF (monoMOF) for H2 storage. After densification, this monoMOF stores 46 g L–1 H2 at 50 bar and 77 K and delivers 41 and 42 g L–1 H2 at operating pressures of 25 and 50 bar, respectively, when deployed in a combined temperature–pressure (25–50 bar/77 K → 5 bar/160 K) swing gas delivery system. This performance represents up to an 80% reduction in the operating pressure requirements for delivering H2 gas when compared with benchmark materials and an 83% reduction compared to compressed H2 gas. Our findings represent a substantial step forward in the application of high-density materials for volumetric H2 storage applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David G.
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany M.
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob
  • Marreiros, João
  • Coudert, François-Xavier
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian
  • Huxley, Michael Thomas
  • Evans, Jack D.
  • Bara, Dominic
  • Falcaro, Paolo
  • Ricco, Raffaele
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Yang, Huajun
  • Forgan, Ross S.
  • Furukawa, Shuhei
  • Sanchez, Eli
  • Gascon, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.
  • Mukherjee, Soumya
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir
  • Horcajada, Patricia
  • DeWitt, Stephen J. A.
  • Salcedo-Abraira, Pablo
  • Kaneko, Katsumi
  • Kukobat, Radovan
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-ichi
  • Lively, Ryan P.
  • Llewellyn, Phillip L.
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos
  • Padial, Natalia M.
  • Garcia-Martinez, Javier
  • Linares, Noemi
  • Maspoch, Daniel
  • Rosseinsky, Matthew J.
  • Suárez del Pino, Jose A.
  • Moghadam, Peyman Z.
  • Oktavian, Rama
  • Morris, Russel E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David
  • Katsoulidis, Alexandros P.
  • Schröder, Martin
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel
  • van der Veen, Monique A.
  • Snurr, Randall Q.
  • Goncalves, Rebecca B.
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, Valeska P.
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • Rega, Davide
  • Van Speybroeck, Veronique
  • Rogge, Sven M.J.
  • Lamaire, Aran
  • Walton, Krista S.
  • Bingel, Lukas W.
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar
  • Ania, Conchi O.
  • Zhang, Bing
  • Yavuz, Cafer T.
  • Nguyen, Thien S.
  • Zamora, Félix
  • Montoro, Carmen
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jimenez, David
  • Azevedo, Diana
  • Vilarrasa-García, Enrique
  • Santos, Bianca F.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana
  • Champness, Neil R.
  • Griffin, Sarah L.
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang
  • Clowes, Rob
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A sol–gel monolithic metal–organic framework with enhanced methane uptake

  • Tian, Tian
  • Zeng, Zhixin
  • Vulpe, Diana
  • Casco, Mirian Elizabeth
  • Divitini, Giorgio
  • Midgley, Paul A.
  • Silvestre-Albero, Joaquín
  • Tan, Jin-Chong
  • Moghadam, Peyman Z.
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
A critical bottleneck for the use of natural gas as a transportation fuel has been the development of materials capable of storing it in a sufficiently compact form at ambient temperature. Here we report the synthesis of a porous monolithic metal–organic framework (MOF), which after successful packing and densification reaches 259 cm3 (STP) cm−3 capacity. This is the highest value reported to date for conformed shape porous solids, and represents a greater than 50% improvement over any previously reported experimental value. Nanoindentation tests on the monolithic MOF showed robust mechanical properties, with hardness at least 130% greater than that previously measured in its conventional MOF counterparts. Our findings represent a substantial step in the application of mechanically robust conformed and densified MOFs for high volumetric energy storage and other industrial applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design of a Functionalized Metal–Organic Framework System for Enhanced Targeted Delivery to Mitochondria

  • Haddad, Salame
  • Abánades Lázaro, Isabel
  • Fantham, Marcus
  • Mishra, Ajay
  • Silvestre-Albero, Joaquín
  • Osterrieth, Johannes W. M.
  • Kaminski Schierle, Gabriele S.
  • Kaminski, Clemens F.
  • Forgan, Ross S.
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Mitochondria play a key role in oncogenesis and constitute one of the most important targets for cancer treatments. Although the most effective way to deliver drugs to mitochondria is by covalently linking them to a lipophilic cation, the in vivo delivery of free drugs still constitutes a critical bottleneck. Herein, we report the design of a mitochondria-targeted metal–organic framework (MOF) that greatly increases the efficacy of a model cancer drug, reducing the required dose to less than 1% compared to the free drug and ca. 10% compared to the nontargeted MOF. The performance of the system is evaluated using a holistic approach ranging from microscopy to transcriptomics. Super-resolution microscopy of MCF-7 cells treated with the targeted MOF system reveals important mitochondrial morphology changes that are clearly associated with cell death as soon as 30 min after incubation. Whole transcriptome analysis of cells indicates widespread changes in gene expression when treated with the MOF system, specifically in biological processes that have a profound effect on cell physiology and that are related to cell death. We show how targeting MOFs toward mitochondria represents a valuable strategy for the development of new drug delivery systems.
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

How reproducible are surface areas calculated from the BET equation?

  • Osterrieth, Johannes W. M.
  • Zamora Abanades, Félix Juan
  • Montoro Cano, María del Carmen
Artículo escrito por un elevado número de autores, solo se referencian el que aparece en primer lugar, el nombre del grupo de colaboración, si le hubiere, y los autores pertenecientes a la UAM, Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob
  • Marreiros, João
  • Bara, Dominic
  • Furukawa, Shuhei
  • Sánchez, Eli
  • Gascón, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.
  • Mukherjee, Soumya
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir
  • Horcajada, Patricia
  • DeWitt, Stephen J. A.
  • Salcedo Abraira, Pablo
  • Kaneko, Katsumi
  • Kukobat, Radovan
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-Ichi
  • Lively, Ryan P.
  • Llewellyn, Phillip
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos
  • Padial, Natalia M.
  • García-Martínez, Javier
  • Linares, Noemí
  • Maspoch, Daniel
  • Rosseinsky, Matthew J.
  • Suárez, José Antonio
  • Moghadam, Peyman
  • Oktavian, Rama
  • Morris, Russell E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David
  • Katsoulidis, Alexandros P.
  • Schröder, Martin
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel
  • Veen, Monique A. van der
  • Snurr, Randall Q.
  • Goncalves, Rebecca B.
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, Valeska P.
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • Rega, Davide
  • Speybroeck, Veronique van
  • Rogge, Sven M. J.
  • Lamaire, Aran
  • Walton, Krista S.
  • Bingel, Lukas W.
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar
  • Ania, Conchi O.
  • Zhang, Bing
  • Yavuz, Cafer T.
  • Nguyen, Thien S.
  • Zamora, Félix
  • Montoro, Carmen
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jiménez, David
  • Azevedo, Diana
  • Vilarrasa-García, E.
  • Santos, Bianca S.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana
  • Champness, Neil R.
  • Griffin, Sarah L.
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang
  • Clowes, Rob
  • Coudert, François Xavier
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian J.
  • Huxley, Michael Thomas
  • Evans, Jack D.
  • Falcaro, Paolo
  • Ricco, Raffaele
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Chang, Huajun
  • Forgan, Ross S.
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC IAA (IAA/RG85685). N.R. acknowledges the support of the Cambridge International Scholarship and the Trinity-Henry Barlow Scholarship (Honorary). O.K.F. and R.Q.S. acknowledge funding from the U.S. Department of Energy (DE-FG02-08ER15967). R.S.F. and D.B. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (SCoTMOF), ERC-2015-StG 677289. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. The authors gratefully acknowledge funding from the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, through the Hydrogen Storage Materials Advanced Research Consortium (HyMARC). J.D.E. acknowledges the support of the Alexander von Humboldt Foundation and the Center for Information Services and High Performance Computing (ZIH) at TU Dresden. S.K.G. and S.M. acknowledge SERB (Project No. CRG/2019/000906), India for financial support. K.K. and R.K. acknowledge Active Co. Research Grant for funding. S.K. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (COSMOS), ERC-2017-StG 756489. N.L. and J.G.M acknowledge funding from the European Commission through the H2020-MSCA-RISE-2019 program (ZEOBIOCHEM – 872102) and the Spanish MICINN and AEI/FEDER (RTI2018-099504-B-C21). N.L. thanks the University of Alicante for funding (UATALENTO17-05). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) S.M.J.R. and A.L. wish to thank the Fund for Scientific Research Flanders (FWO), under grant nos. 12T3519N and 11D2220N. L.S. was supported by the EPSRC Cambridge NanoDTC EP/L015978/1. C.T.Y. and T.S.N. acknowledges funds from the National Research Foundation of Korea, NRF-2017M3A7B4042140 and NRF-2017M3A7B4042235. P.F. and H. Y. acknowledge US Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Award No. DE-SC0010596 (P.F.). R.O. would like to acknowledge funding support during his Ph.D. study from Indonesian Endowment Fund for Education-LPDP with the contract No. 202002220216006. B.V.L, S.T.E and A.M.P acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement no. 639233, COFLeaf).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monolithic Zirconium-Based Metal-Organic Frameworks for Energy-Efficient Water Adsorption Applications

  • Çamur, Ceren
  • Babu, Robin
  • Suárez, José Antonio
  • Rampal, Nakul
  • Pérez-Carvajal, Javier
  • Hügenell, Philipp
  • Ernst, Sebastian-Johannes
  • Silvestre‐Albero, Joaquín
  • Imaz, Inhar
  • Madden, David
  • Maspoch, Daniel
  • Fairen-Jiménez, David
Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO2 emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal-organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH2 , and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed-solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm-3 without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C)., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC (EP/S009000/1). N.R. acknowledges support from the Cambridge International Scholarship and the Trinity Henry-Barlow Scholarship (honorary). D.F.-J. thanks the Royal Society for funding through a University Research Fellowship., J.S.A. would like to acknowledge financial support from Ministerio de Ciencia e Innovación (Project PID2019-108453GB-C21)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning the endocytosis mechanism of Zr-based metal-organic frameworks through linker functionalization

  • Orellana-Tavra, Claudia
  • Haddad, Salame
  • Marshall, Ross J.
  • Abánades Lázaro, Isabel
  • Boix, Gerard|||0000-0001-8431-4813
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Forgan, Ross S.
  • Fairen-Jimenez, David|||0000-0002-5013-1194
A critical bottleneck for the use of metal-organic frameworks (MOFs) as drug delivery systems has been allowing them to reach their intracellular targets without being degraded in the acidic environment of the lysosomes. Cells take up particles by endocytosis through multiple biochemical pathways, and the fate of these particles depends on these routes of entry. Here, we show the effect of functional group incorporation into a series of Zr-based MOFs on their endocytosis mechanisms, allowing us to design an efficient drug delivery system. In particular, naphthalene-2,6-dicarboxylic acid and 4,4'-biphenyldicarboxylic acid ligands promote entry through the caveolin -pathway, allowing the particles to avoid lysosomal degradation and be delivered into the cytosol and enhancing their therapeutic activity when loaded with drugs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

How reproducible are surface areas calculated from the BET equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob|||0000-0003-3178-5480
  • Marreiros, João|||0000-0002-4898-2096
  • Ania, Conchi|||0000-0001-9517-8132
  • Azevedo, Diana
  • Vilarrasa-Garcia, E.|||0000-0003-4190-8763
  • Santos, Bianca F.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana|||0000-0003-1824-0291
  • Champness, Neil|||0000-0003-2970-1487
  • Griffin, Sarah|||0000-0003-4872-983X
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit|||0000-0002-3933-9744
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang|||0000-0002-0382-5863
  • Clowes, Rob
  • Coudert, François-Xavier|||0000-0001-5318-3910
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.|||0000-0003-1705-8850
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian|||0000-0003-2822-0956
  • Huxley, Michael Thomas
  • Evans, Jack D.|||0000-0001-9521-2601
  • Falcaro, Paolo|||0000-0001-5935-0409
  • Riccò, Raffaele|||0000-0002-0296-9398
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Yang, Huajun
  • Forgan, Ross|||0000-0003-4767-6852
  • Bara, Dominic
  • Furukawa, Shuhei|||0000-0003-3849-8038
  • Sanchez, Eli
  • Gascon, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.|||0000-0002-1672-4009
  • Mukherjee, Soumya|||0000-0003-2375-7009
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir|||0000-0002-5326-6158
  • Horcajada, Patricia|||0000-0002-6544-5911
  • Salcedo-Abraira, Pablo|||0000-0003-4812-8938
  • Kaneko, Katsumi
  • Kukobat, Radovan|||0000-0003-4620-9451
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-ichi|||0000-0002-7904-5003
  • Lively, Ryan P.
  • DeWitt, Stephen J.A.
  • Llewellyn, Phillip
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.|||0000-0002-1558-2547
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos|||0000-0003-3203-0047
  • Padial, Natalia M.|||0000-0001-6067-3360
  • Garcia-Martinez, Javier|||0000-0002-7089-4973
  • Linares, Noemi|||0000-0001-9376-2984
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Moghadam, Peyman
  • Oktavian, Rama|||0000-0003-0701-4213
  • Morris, Russel E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David|||0000-0002-7203-9655
  • Rosseinsky, Matthew J.
  • Katsoulidis, Alexandros P.|||0000-0003-0860-7440
  • Schröder, Martin|||0000-0001-6992-0700
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges|||0000-0001-8696-9733
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel W.|||0000-0002-6260-7727
  • Snurr, Randall Q.
  • Barbosa Goncalves, Rebecca|||0000-0001-5008-7798
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, V.P.|||0000-0003-3049-0939
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • van der Veen, Monique
  • Rega, Davide
  • Van Speybroeck, Veronique|||0000-0003-2206-178X
  • Rogge, Sven M.J.|||0000-0003-4493-5708
  • Lamaire, Aran|||0000-0003-0093-5490
  • Walton, Krista S.
  • Bingel, Lukas|||0000-0001-9839-886X
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar M.
  • Zhang, Bing
  • Yavuz, Cafer Tayyar
  • Nguyen, Thien S.
  • Zamora, Félix|||0000-0001-7529-5120
  • Montoro, Carmen|||0000-0003-4984-2973
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jimenez, David|||0000-0002-5013-1194
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called "BET surface identification" (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monolithic Zirconium-Based Metal-Organic Frameworks for Energy-Efficient Water Adsorption Applications

  • Camur, Ceren|||0000-0002-4475-0511
  • Babu, Robin
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Rampal, Nakul
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Hügenell, Philipp
  • Ernst, Sebastian-Johannes
  • Silvestre-Albero, Joaquin|||0000-0002-0303-0817
  • Imaz, Inhar|||0000-0002-0278-1141
  • Madden, David G.
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Fairen-Jimenez, David|||0000-0002-5013-1194
Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal-organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH, and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed-solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C).