Pasar al contenido principal

DISEÑO DE LA TRANSFERENCIA ELECTRONICA EN NANOPARTICULAS HIBRIDAS DE SEMICONDUCTORES Y COLORANTES PARA CELULAS SOLARES DE BAJA TEMPERATURA (HYNANOSC)

RTI2018-099504-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Standing on the Shoulders of Giants – Your Mentors and Role Models Will Shape Your Career

  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Choosing the right mentors and role models has a profound impact in both our lives and professional careers; however, most often, not enough time or thought is given to this important decision. Because of that, we may miss some great opportunities and limit the potential benefits. In this invited contribution, I share my personal experience on nurturing the relationship with mentors and on choosing role models with my same values and a strong sense of service.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly emissive hybrid mesoporous organometallo-silica nanoparticles for bioimaging

  • Ezquerro, Cintia
  • López, Icíar
  • Serrano, Elena
  • Alfaro-Arnedo, Elvira
  • Lalinde, Elena
  • Larráyoz, Ignacio
  • García Pichel, José
  • Garcia-Martinez, Javier
  • Berenguer, Jesús R.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Production of mesoporous silica nanoparticles (MSNs) with uniform textural characteristics and imaging properties on a large scale is still a challenge. Thus, the design of simple and scalable methods to obtain reproducible functionalized MSNs has become even more relevant. Herein, we describe an in situ strategy for the synthesis and surface functionalization of highly luminescent mesoporous organometallo-silica nanoparticles. Using the [Ir(dfppy)2(dasipy)]PF6 chromophore and TEOS as sol–gel precursors and different capping agents, such as DMDES or APTES, three different emissive MSNs were prepared (NPOH_IS, NPMe_IS and NPNH2_IS), each containing hydroxyl, methyl and amine groups on their surfaces, respectively. All three were tested on human tumor A549 (lung carcinoma) and HeLa (cervix carcinoma) cell lines, showing intense and stable yellow phosphorescence, biocompatibility and efficient internalization. Moreover, NPMe_IS nanoparticles showed excellent colloidal stability, both in water and biological media, and a BET area of 1120 m2 g−1, making them not only luminescent biomarkers, but potentially also controlled delivery vectors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surfactant‐Templated Zeolites: From Thermodynamics to Direct Observation

  • Mendoza-Castro, Monica J.
  • Serrano, Elena
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Surfactant‐templating is a versatile method to introduce tailored intracrystalline mesoporosity in zeolites. This method has been proven to be extremely effective to finely control both the amount of mesoporosity and the size of their mesopores, while maintaining the main features of the original zeolite, such as crystallinity, acidity, and hydrothermal stability. By building on the knowledge generated during the last 30 years in the field of amorphous mesoporous materials, the surfactant‐templating method has been successfully applied to develop intracrystalline mesoporosity into a variety of zeolite structures including FAU, BEA, MOR, LTL, and MFI. The improvement in both the textural and diffusional properties of the zeolite results in excellent catalytic performances in different industrially relevant processes, ranging from fluid catalytic cracking to the synthesis of active pharmaceutical ingredients. As a result of the excellent catalytic performances shown by the surfactant‐templated mesoporous Y zeolite, this is currently being used in several refineries, being the first industrial and large‐scale application of hierarchical zeolites. In this progress report, the literature regarding the surfactant‐templating method in zeolites is critically reviewed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Accelerating the Crystallization of Zeolite SSZ-13 with Polyamines

  • Dai, Heng
  • Claret, Jakob
  • Kunkes, Eduard L.
  • Vattipalli, Vivek
  • Linares, Noemi
  • Huang, Chenfeng
  • Fiji, Muhammad
  • Garcia-Martinez, Javier
  • Moini, Ahmad
  • Rimer, Jeffrey D.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Tailoring processes of nucleation and growth to achieve desired material properties is a pervasive challenge in synthetic crystallization. In systems where crystals form via nonclassical pathways, engineering materials often requires the controlled assembly and structural evolution of colloidal precursors. In this study, we examine zeolite SSZ-13 crystallization and show that several polyquaternary amines function as efficient accelerants of nucleation, and, in select cases, tune crystal size by orders of magnitude. Among the additives tested, polydiallyldimethylammonium (PDDA) was found to have the most pronounced impact on the kinetics of SSZ-13 formation, leading to a 4-fold reduction in crystallization time. Our findings also reveal that enhanced nucleation occurs at an optimal PDDA concentration where a combination of light scattering techniques demonstrate these conditions lead to polymer-induced aggregation of amorphous precursors and the promotion of (alumino)silicate precipitation from growth solution. Here, we show that relatively low concentrations of polymer additives can be used in unique ways to dramatically enhance SSZ-13 crystallization rates, thereby improving the overall efficiency of zeolite synthesis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tracking Zeolite Crystallization by Elemental Mapping

  • Chawla, Aseem
  • Linares, Noemi
  • Li, Rui
  • Garcia-Martinez, Javier
  • Rimer, Jeffrey D.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
A large number of inorganic and organic materials have been postulated to grow via nonclassical pathways involving the assembly of amorphous precursors that serve as growth units for crystallization. Elucidating the assembly, microstructure, and mechanism(s) by which precursors are involved in processes of nucleation and growth is nontrivial because of the lack of available techniques that are capable of monitoring amorphous-to-crystal transformations with sufficient spatiotemporal resolution. Here we propose an elemental mapping method employing field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FE-SEM-EDX) as a versatile tool to characterize morphological and compositional properties of precursors during the crystallization of five zeolites (MER, MFI, MOR, TON, and LTL) that are used in commercial applications that include (but are not limited to) catalysis, ion exchange, separations, drug delivery, and adsorption. Time-resolved ex situ elemental mapping images of extracted solids during several stages of zeolite crystallization reveal that a sufficient disparity in the chemical composition (e.g., alkali metal content) between amorphous precursors and crystals can be exploited for (i) tracking the early stages of zeolite crystallization, (ii) locating where it happens, and (iii) resolving residual amorphous material among crystalline domains. In this study, we also show that FE-SEM-EDX elemental mapping is a highly sensitive technique to detect the onset of nucleation, the completion of crystallization, and the existence of impurities. Given the ubiquitous presence of amorphous precursors during nonclassical crystallization, we expect that elemental mapping may prove valuable for understanding and tracking the growth of other zeolites, minerals, and related materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced activity of a bifunctional Pt/zeolite Y catalyst with an intracrystalline hierarchical pore system in the aqueous-phase hydrogenation of levulinic acid

  • Vu, Hue-Tong
  • Harth, Florian Maximilian
  • Goepel, Michael
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Gläser, Roger
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Mesopores in the range of 4 to 5 nm were introduced into zeolite Y (nSi/nAl = 16) by surfactant-templating. This method using a mixture of octadecyltrimethylammonium hydroxide and bromide (C18TAOH/C18TABr) yields a mesoporous zeolite (Y–C18TAOH) with a higher specific mesopore volume and only a small loss in crystallinity and specific micropore volume. After loading with Pt, the two bifunctional catalysts (2.7Pt/Y and 2.6Pt/Y–C18TAOH) were applied in the aqueous-phase hydrogenation of levulinic acid (LA) to γ–valerolactone (GVL) (pH2 = 2.5 MPa, 393 K). Intraparticle mass–transfer limitations present for the catalyst 2.7Pt/Y were not observed in the LA hydrogenation over the catalyst with the hierarchical pore system 2.6Pt/Y–C18TAOH. Changes in the acid and de-/hydrogenation functionality are shown not to be responsible for the high catalytic activity of 2.6Pt/Y–C18TAOH. The presence of additional mesopores in a bifunctional catalyst based on zeolite Y is proven to enhance the mass-transfer properties and the resulting catalytic activity in the aqueous-phase hydrogenation of LA for the first time.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Engineering Mesopore Formation in Hierarchical Zeolites under High Hydrostatic Pressure

  • Sato, Riku
  • Liu, Zhendong
  • Peng, Ce
  • Tan, Che
  • Hu, Peidong
  • Zhu, Jie
  • Takemura, Masamori
  • Yonezawa, Yasuo
  • Yamada, Hiroki
  • Endo, Akira
  • Garcia-Martinez, Javier
  • Okubo, Tatsuya
  • Wakihara, Toru
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Tailoring the textural properties of porous materials is of paramount importance to optimize their performance in a variety of applications. To this end, critical synthesis parameters influencing crystallization and reorganization of porous materials need to be identified and judiciously controlled. Although the effect of pressure on chemical transformations is ubiquitously present, its impact on fabricating porous materials with tailored physicochemical properties remains unexplored and its potential untapped. In this work, we disclose a detailed study on the effects of high hydrostatic pressure on the formation of well-controlled intracrystalline mesopores in ultrastable Y (USY) zeolite by the so-called surfactant-templating method. The rate of mesopore formation significantly increases upon elevating the pressure, whereas the average size of the mesopores—directed by the self-assembly of the surfactant—decreases. By simultaneously adjusting the external pressure and selecting surfactants of different lengths, we have been able to precisely control the mesopore size in the USY zeolite. Our findings clearly show that external hydrostatic pressure can be used to both accelerate mesopore formation and engineer their size with subnanometer precision. As a second example, we investigated the effect of external pressure on the synthesis of MCM-41. The results on MCM-41, consistent with our observations on the USY zeolite, further confirm that the use of high external pressure greatly affects the self-assembly behaviors of the amphiphilic molecules involved in the synthesis/modification of the porous materials. Our results show that the high-pressure approach represents an untapped opportunity for synthesis/modification of functional porous materials that will likely yield new discoveries in this field.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hybrid Amino Acid-TiO2 Materials with Tuneable Crystalline Structure and Morphology for Photocatalytic Applications

  • Sarigul, Gamze
  • Chamorro-Mena, Ignacio
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Serrano, Elena
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
A method to produce hybrid organotitanias, both as thin films and suspensions, showing excellent photocatalyic activity in the degradation of organic dyes in aqueous solutions under visible light irradiation is disclosed. This method is based on the in situ incorporation of an amino acid, l-tyrosine, during the synthesis of the titanias owing to its coordination and co-condensation with the titania precursor under acidic conditions. This methodology allows the fine -tuning of their crystalline structure, size, and shape by simply varying the pH of the synthesis gel, leading to anatase nanoparticles of ≈5 nm and surface areas of ≈200 m2 g−1 at pH = 2.2, while highly crystalline rutile nanorods are formed at pH = 0. The incorporation of l-tyrosine to both anatase nanoparticles and rutile nanorods enables these materials to absorb light in the visible range due to both the decrease in their band gap, as compared to the reference materials, and the presence of additional absorption edges at wavelengths higher than 400 nm. Consequently, the photocatalytic activity of both hybrid anatase nanoparticles and rutile nanorods exhibits a 120% enhanced photocatalytic efficiency, as compared to that of l-Tyr-free titanias and the commercial P25, which confirms their potential application in water remediation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Blue-LED activated photocatalytic hydrogenation of nitroarenes with Cu2O/CuO heterojunctions

  • Chamorro-Mena, Ignacio
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
This study describes how the optimization of Cu2O/CuO heterostructures can enhance their (photo)catalytic performance. More specifically, the evaluation of catalysts with different Cu2O/CuO molar ratios was used to optimize their performance for the hydrogenation of 4-nitrophenol under both blue-LED light and dark conditions. For the first time, we analyzed the effect of blue LED irradiation on this reaction and found that when blue LEDs are used as the light source, a Cu2O/CuO ratio of 0.15 results in rate constants 7 to 3 times higher than those of catalysts with either lower (0.01) or higher (0.42) ratios. Furthermore, this photocatalyst shows good stability, >70% after 5 cycles, and excellent chemoselectivity in the selective reduction of the nitro group in the presence of other functionalities, i.e. –COOH, –CONH2 and –OH.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Consecutive Surfactant-Templating Opens up New Possibilities for Hierarchical Zeolites

  • Jardim, Erika de Oliveira
  • Serrano, Elena
  • Martínez, Juan Carlos
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Intracrystalline mesoporosity can be conveniently introduced in zeolites using cationic surfactants in a mild basic solution –a process known as surfactant-templating. However, this technique is limited to small-headed and single-chain surfactants because they need to diffuse through the narrow micropores of the zeolite, which limits the potential of this approach. Herein, we show that the mesoporosity generated in zeolites with small-headed and single-chain surfactants, such as CTAB, provides enough accessibility to allow the use of bulky surfactants that otherwise cannot enter the structure of the zeolite. Moreover, in this contribution, a USY zeolite has been successively treated with cationic surfactants of different chain lengths (C12 to C22) proving that the mesopores introduced in the zeolite can be efficiently widened and narrowed by consecutive treatments with surfactants of the suitable size. Finally, the use of consecutive surfactant-templating opens up the possibility of using surfactants of different packing parameters to produce new hierarchical architectures in zeolites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Spontaneous Pillaring of Pentasil Zeolites

  • Jain, Rishabh
  • Chawla, Aseem
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Rimer, Jeffrey D.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Conventional methods to prepare hierarchical zeolites depend upon the use of organic structure‐directing agents and often require multiple synthesis steps with limited product yield and Brønsted acid concentration. Here, it is shown that the use of MEL‐ or MFI‐type zeolites as crystalline seeds induces the spontaneous formation of self‐pillared pentasil zeolites, thus avoiding the use of any organic or branching template for the crystallization of these hierarchical structures. The mechanism of formation is evaluated by time‐resolved electron microscopy to provide evidence for the heterogeneous nucleation and growth of sequentially branched nanosheets from amorphous precursors. The resulting hierarchical zeolites have large external surface area and high percentages of external acid sites, which markedly improves their catalytic performance in the Friedel–Crafts alkylation and methanol to hydrocarbons reactions. These findings highlight a facile, commercially viable synthesis method to reduce mass‐transport limitations and improve the performance of zeolite catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ultrafast surfactant-templating of *BEA zeolite: An efficient catalyst for the cracking of polyethylene pyrolysis vapours

  • Khalil, Umer
  • Liu, Zhendong
  • Peng, Ce
  • Hikichi, Naomichi
  • Wakihara, Toru
  • Garcia-Martinez, Javier
  • Okubo, Tatsuya
  • Bhattacharya, Sankar
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Introducing intracrystalline mesoporosity to zeolites is an effective way to reduce their diffusion limitations and enhancing their catalytic performance in reactions where large molecules are involved. The emergence of the so-called surfactant-templating technique has enriched the toolbox of methods to prepare mesoporous zeolites, in which amphiphilic molecules are used to assist in and direct the generation of mesopores in a pre-existing zeolite structure under alkaline conditions. We herein present ultrafast surfactant-templating of *BEA zeolite, which is achieved in just a few minutes with a tubular reactor that features fast heating. Two *BEA zeolites of the same Si/Al ratio, but differing in crystal size, are employed to demonstrate the concept. Tuning the interplay between the surfactant concentration and the alkalinity leads to the ultrafast generation of mesoporosity in the *BEA zeolite with the larger crystal size (BEA (L)) in 5 min; while it fails to generate uniform mesopores to the *BEA zeolite with the smaller crystal size (BEA (S)) under otherwise identical conditions. The ultrafast surfactant-templating of *BEA (S) is achieved only when it is partially dealuminated through a pre-treatment with acid. Our results provide new insights on the synergetic effect between the surfactant and the base that governs the surfactant-templating process and on how to produce intracrystalline mesoporosity with narrow pore size distribution under ultrafast conditions (2 min). The resultant mesoporous *BEA zeolites have been tested in the catalytic cracking of the vapours produced by pyrolyzing low-density polyethylene, a promising reaction for converting waste plastics into fuels. Improved selectivity towards aromatic hydrocarbons and light olefins is observed as a result of enhanced accessibility and availability of active sites, validating the superiority of the surfactant-templated *BEA zeolites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David G.
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany M.
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob
  • Marreiros, João
  • Coudert, François-Xavier
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian
  • Huxley, Michael Thomas
  • Evans, Jack D.
  • Bara, Dominic
  • Falcaro, Paolo
  • Ricco, Raffaele
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Yang, Huajun
  • Forgan, Ross S.
  • Furukawa, Shuhei
  • Sanchez, Eli
  • Gascon, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.
  • Mukherjee, Soumya
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir
  • Horcajada, Patricia
  • DeWitt, Stephen J. A.
  • Salcedo-Abraira, Pablo
  • Kaneko, Katsumi
  • Kukobat, Radovan
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-ichi
  • Lively, Ryan P.
  • Llewellyn, Phillip L.
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos
  • Padial, Natalia M.
  • Garcia-Martinez, Javier
  • Linares, Noemi
  • Maspoch, Daniel
  • Rosseinsky, Matthew J.
  • Suárez del Pino, Jose A.
  • Moghadam, Peyman Z.
  • Oktavian, Rama
  • Morris, Russel E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David
  • Katsoulidis, Alexandros P.
  • Schröder, Martin
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel
  • van der Veen, Monique A.
  • Snurr, Randall Q.
  • Goncalves, Rebecca B.
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, Valeska P.
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • Rega, Davide
  • Van Speybroeck, Veronique
  • Rogge, Sven M.J.
  • Lamaire, Aran
  • Walton, Krista S.
  • Bingel, Lukas W.
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar
  • Ania, Conchi O.
  • Zhang, Bing
  • Yavuz, Cafer T.
  • Nguyen, Thien S.
  • Zamora, Félix
  • Montoro, Carmen
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jimenez, David
  • Azevedo, Diana
  • Vilarrasa-García, Enrique
  • Santos, Bianca F.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana
  • Champness, Neil R.
  • Griffin, Sarah L.
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang
  • Clowes, Rob
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Direct Synthesis of Highly Siliceous ZnO-FAU Zeolite with Enhanced Performance in Hydrocarbon Cracking Reactions

  • Parmar, Deependra
  • Mallette, Adam J.
  • Linares, Noemi
  • Saslow, Sarah A.
  • Terlier, Tanguy
  • Strohm, James J.
  • Barber, Lee P.
  • Dai, Heng
  • Garcia-Martinez, Javier
  • Rimer, Jeffrey D.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
The hydrothermal stability and catalytic activity of zeolite Y (faujasite, FAU) is highly dependent on its composition. High silicon content is often desirable for catalytic applications; however, direct synthesis of faujasite with high silicon content (Si/Al > 2.5) is nontrivial. Here, we present an organic-free synthesis of FAU-type zeolite with Si/Al = 3.4 using zinc oxide as a modifier. A combination of spectroscopy and microscopy techniques confirms that ZnO is well-distributed within zeolite pores as extra-framework species, and the nature of these species differs from bulk ZnO and framework zinc in Zn-FAU crystals. We demonstrate that the increased Si/Al ratio leads to improved hydrothermal stability, while catalytic cracking of 1-hexene and cumene show that ZnO-FAU exhibits a significantly longer lifetime compared to in-house and commercial zeolite Y. Collectively, this study presents a facile and efficient method to prepare more siliceous FAU with enhanced catalytic performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Micelle Formation inside Zeolites: A Critical Step in Zeolite Surfactant-Templating Observed by Raman Microspectroscopy

  • Fleury, Guillaume
  • Mendoza-Castro, Monica J.
  • Linares, Noemi
  • Roeffaers, Maarten B.J.
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Micelle formation inside faujasite (FAU) zeolite, a critical step in the introduction of mesoporosity in zeolites by surfactant templating, has been confirmed by both 13C NMR and Raman spectroscopy. Here we provide unambiguous evidence of the incorporation of surfactant molecules inside zeolites during the first step of the surfactant-templating process followed by their self-assembly into micelles after hydrothermal treatment. The homogeneous presence of these micelles throughout zeolite crystals has been directly observed by Raman microspectroscopy, confirming the uniform incorporation of mesoporosity in zeolites by surfactant templating.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hierarchical Catalysts Prepared by Interzeolite Transformation

  • Mendoza-Castro, Monica J.
  • Jardim, Erika de Oliveira
  • Ramírez-Marquez, Nelcari-Trinidad
  • Trujillo, Carlos Alexander
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Ramírez-Marquez, Nelcari-Trinidad|||/items/ca2b21a2-0a83-4159-b68c-c76e0943ad43
Interzeolite transformation has been used to produce a novel family of hierarchical catalysts featuring excellent textural properties, strong acidity, and superior catalytic performance for the Friedel–Crafts alkylation of indole with benzhydrol, the Claisen–Schmidt condensation of benzaldehyde and hydroxyacetophenone, and the cracking of polystyrene. Intermediate solids of the FAU interzeolite transformation into BEA display both increased accessibility─due to the development of mesoporosity─and strong acidity─caused by the presence of ultrasmall crystals or zeolitic fragments in their structure. The use of surfactants allows for the development of the hierarchical catalysts with very narrow pore size distribution. The properties of interzeolite transformation intermediates (ITIs) can be fine-tuned simply by stopping the interconversion at different times.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob
  • Marreiros, João
  • Bara, Dominic
  • Furukawa, Shuhei
  • Sánchez, Eli
  • Gascón, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.
  • Mukherjee, Soumya
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir
  • Horcajada, Patricia
  • DeWitt, Stephen J. A.
  • Salcedo Abraira, Pablo
  • Kaneko, Katsumi
  • Kukobat, Radovan
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-Ichi
  • Lively, Ryan P.
  • Llewellyn, Phillip
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos
  • Padial, Natalia M.
  • García-Martínez, Javier
  • Linares, Noemí
  • Maspoch, Daniel
  • Rosseinsky, Matthew J.
  • Suárez, José Antonio
  • Moghadam, Peyman
  • Oktavian, Rama
  • Morris, Russell E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David
  • Katsoulidis, Alexandros P.
  • Schröder, Martin
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel
  • Veen, Monique A. van der
  • Snurr, Randall Q.
  • Goncalves, Rebecca B.
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, Valeska P.
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • Rega, Davide
  • Speybroeck, Veronique van
  • Rogge, Sven M. J.
  • Lamaire, Aran
  • Walton, Krista S.
  • Bingel, Lukas W.
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar
  • Ania, Conchi O.
  • Zhang, Bing
  • Yavuz, Cafer T.
  • Nguyen, Thien S.
  • Zamora, Félix
  • Montoro, Carmen
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jiménez, David
  • Azevedo, Diana
  • Vilarrasa-García, E.
  • Santos, Bianca S.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana
  • Champness, Neil R.
  • Griffin, Sarah L.
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang
  • Clowes, Rob
  • Coudert, François Xavier
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian J.
  • Huxley, Michael Thomas
  • Evans, Jack D.
  • Falcaro, Paolo
  • Ricco, Raffaele
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Chang, Huajun
  • Forgan, Ross S.
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC IAA (IAA/RG85685). N.R. acknowledges the support of the Cambridge International Scholarship and the Trinity-Henry Barlow Scholarship (Honorary). O.K.F. and R.Q.S. acknowledge funding from the U.S. Department of Energy (DE-FG02-08ER15967). R.S.F. and D.B. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (SCoTMOF), ERC-2015-StG 677289. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. The authors gratefully acknowledge funding from the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, through the Hydrogen Storage Materials Advanced Research Consortium (HyMARC). J.D.E. acknowledges the support of the Alexander von Humboldt Foundation and the Center for Information Services and High Performance Computing (ZIH) at TU Dresden. S.K.G. and S.M. acknowledge SERB (Project No. CRG/2019/000906), India for financial support. K.K. and R.K. acknowledge Active Co. Research Grant for funding. S.K. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (COSMOS), ERC-2017-StG 756489. N.L. and J.G.M acknowledge funding from the European Commission through the H2020-MSCA-RISE-2019 program (ZEOBIOCHEM – 872102) and the Spanish MICINN and AEI/FEDER (RTI2018-099504-B-C21). N.L. thanks the University of Alicante for funding (UATALENTO17-05). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) S.M.J.R. and A.L. wish to thank the Fund for Scientific Research Flanders (FWO), under grant nos. 12T3519N and 11D2220N. L.S. was supported by the EPSRC Cambridge NanoDTC EP/L015978/1. C.T.Y. and T.S.N. acknowledges funds from the National Research Foundation of Korea, NRF-2017M3A7B4042140 and NRF-2017M3A7B4042235. P.F. and H. Y. acknowledge US Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Award No. DE-SC0010596 (P.F.). R.O. would like to acknowledge funding support during his Ph.D. study from Indonesian Endowment Fund for Education-LPDP with the contract No. 202002220216006. B.V.L, S.T.E and A.M.P acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement no. 639233, COFLeaf).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

How reproducible are surface areas calculated from the BET equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob|||0000-0003-3178-5480
  • Marreiros, João|||0000-0002-4898-2096
  • Ania, Conchi|||0000-0001-9517-8132
  • Azevedo, Diana
  • Vilarrasa-Garcia, E.|||0000-0003-4190-8763
  • Santos, Bianca F.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana|||0000-0003-1824-0291
  • Champness, Neil|||0000-0003-2970-1487
  • Griffin, Sarah|||0000-0003-4872-983X
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit|||0000-0002-3933-9744
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang|||0000-0002-0382-5863
  • Clowes, Rob
  • Coudert, François-Xavier|||0000-0001-5318-3910
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.|||0000-0003-1705-8850
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian|||0000-0003-2822-0956
  • Huxley, Michael Thomas
  • Evans, Jack D.|||0000-0001-9521-2601
  • Falcaro, Paolo|||0000-0001-5935-0409
  • Riccò, Raffaele|||0000-0002-0296-9398
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Yang, Huajun
  • Forgan, Ross|||0000-0003-4767-6852
  • Bara, Dominic
  • Furukawa, Shuhei|||0000-0003-3849-8038
  • Sanchez, Eli
  • Gascon, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.|||0000-0002-1672-4009
  • Mukherjee, Soumya|||0000-0003-2375-7009
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir|||0000-0002-5326-6158
  • Horcajada, Patricia|||0000-0002-6544-5911
  • Salcedo-Abraira, Pablo|||0000-0003-4812-8938
  • Kaneko, Katsumi
  • Kukobat, Radovan|||0000-0003-4620-9451
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-ichi|||0000-0002-7904-5003
  • Lively, Ryan P.
  • DeWitt, Stephen J.A.
  • Llewellyn, Phillip
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.|||0000-0002-1558-2547
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos|||0000-0003-3203-0047
  • Padial, Natalia M.|||0000-0001-6067-3360
  • Garcia-Martinez, Javier|||0000-0002-7089-4973
  • Linares, Noemi|||0000-0001-9376-2984
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Moghadam, Peyman
  • Oktavian, Rama|||0000-0003-0701-4213
  • Morris, Russel E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David|||0000-0002-7203-9655
  • Rosseinsky, Matthew J.
  • Katsoulidis, Alexandros P.|||0000-0003-0860-7440
  • Schröder, Martin|||0000-0001-6992-0700
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges|||0000-0001-8696-9733
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel W.|||0000-0002-6260-7727
  • Snurr, Randall Q.
  • Barbosa Goncalves, Rebecca|||0000-0001-5008-7798
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, V.P.|||0000-0003-3049-0939
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • van der Veen, Monique
  • Rega, Davide
  • Van Speybroeck, Veronique|||0000-0003-2206-178X
  • Rogge, Sven M.J.|||0000-0003-4493-5708
  • Lamaire, Aran|||0000-0003-0093-5490
  • Walton, Krista S.
  • Bingel, Lukas|||0000-0001-9839-886X
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar M.
  • Zhang, Bing
  • Yavuz, Cafer Tayyar
  • Nguyen, Thien S.
  • Zamora, Félix|||0000-0001-7529-5120
  • Montoro, Carmen|||0000-0003-4984-2973
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jimenez, David|||0000-0002-5013-1194
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called "BET surface identification" (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.