Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly emissive hybrid mesoporous organometallo-silica nanoparticles for bioimaging

  • Ezquerro, Cintia
  • López, Icíar
  • Serrano, Elena
  • Alfaro-Arnedo, Elvira
  • Lalinde, Elena
  • Larráyoz, Ignacio
  • García Pichel, José
  • Garcia-Martinez, Javier
  • Berenguer, Jesús R.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Production of mesoporous silica nanoparticles (MSNs) with uniform textural characteristics and imaging properties on a large scale is still a challenge. Thus, the design of simple and scalable methods to obtain reproducible functionalized MSNs has become even more relevant. Herein, we describe an in situ strategy for the synthesis and surface functionalization of highly luminescent mesoporous organometallo-silica nanoparticles. Using the [Ir(dfppy)2(dasipy)]PF6 chromophore and TEOS as sol–gel precursors and different capping agents, such as DMDES or APTES, three different emissive MSNs were prepared (NPOH_IS, NPMe_IS and NPNH2_IS), each containing hydroxyl, methyl and amine groups on their surfaces, respectively. All three were tested on human tumor A549 (lung carcinoma) and HeLa (cervix carcinoma) cell lines, showing intense and stable yellow phosphorescence, biocompatibility and efficient internalization. Moreover, NPMe_IS nanoparticles showed excellent colloidal stability, both in water and biological media, and a BET area of 1120 m2 g−1, making them not only luminescent biomarkers, but potentially also controlled delivery vectors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Visible‐Light‐Activated Black Organotitanias: How Synthetic Conditions Influence Their Structure and Photocatalytic Activity

  • Jiménez-López, Jesús
  • Linares, Noemi
  • Serrano, Elena
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
A series of low‐temperature, visible‐light‐activated black organotitanias were synthesised through a sol–gel strategy that allowed the in situ incorporation of p‐phenylenediamine (PPD) into the framework of anatase nanoparticles. The effect of the synthetic conditions on the crystalline structure and photocatalytic activity of these materials was assessed by several characterisation techniques, which revealed a small crystalline domain size (4.6–5.5 nm), effective incorporation of PPD inside the nanoparticles, and a significant reduction in the band gap of these materials (from 3.2 to 2.7–2.9 eV). A systematic study of the synthetic parameters also allowed a significant reduction of the solvent used for the preparation of these black organotitanias (20‐fold), as well as the crystallisation time, without compromising the structural properties and photocatalytic activity of these materials. The organotitanias with the highest PPD content and high crystallinity result in the best performing materials in the photocatalytic degradation of rhodamine 6G under both UV‐ and visible‐light irradiation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The Energetics of Surfactant‐Templating of Zeolites

  • Linares, Noemi
  • Jardim, Erika de Oliveira
  • Sachse, Alexander
  • Serrano, Elena
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Mesoporosity can be conveniently introduced into zeolites by treating them in basic surfactant solutions. The apparent activation energy involved in the formation of mesopores in USY by surfactant‐templating was determined using a combination of in situ synchrotron X‐ray diffraction and ex situ gas adsorption. Additionally, techniques such as pH measurement and thermogravimetry/differential thermal analysis were employed to determine OH− evolution and cetyltrimethylammonium ion (CTA+) uptake during the development of mesoporosity, thereby providing information about the different steps involved. The combination of both in situ and ex situ techniques has allowed determination of the apparent activation energies of the different processes involved in the mesostructuring of USY zeolites for the first time. Apparent activation energies are of the same order of magnitude (30–65 kJ mol−1) as those involved in the crystallization of zeolites. Hence, important mechanistic insight into the surfactant‐templating method was obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surfactant‐Templated Zeolites: From Thermodynamics to Direct Observation

  • Mendoza-Castro, Monica J.
  • Serrano, Elena
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Surfactant‐templating is a versatile method to introduce tailored intracrystalline mesoporosity in zeolites. This method has been proven to be extremely effective to finely control both the amount of mesoporosity and the size of their mesopores, while maintaining the main features of the original zeolite, such as crystallinity, acidity, and hydrothermal stability. By building on the knowledge generated during the last 30 years in the field of amorphous mesoporous materials, the surfactant‐templating method has been successfully applied to develop intracrystalline mesoporosity into a variety of zeolite structures including FAU, BEA, MOR, LTL, and MFI. The improvement in both the textural and diffusional properties of the zeolite results in excellent catalytic performances in different industrially relevant processes, ranging from fluid catalytic cracking to the synthesis of active pharmaceutical ingredients. As a result of the excellent catalytic performances shown by the surfactant‐templated mesoporous Y zeolite, this is currently being used in several refineries, being the first industrial and large‐scale application of hierarchical zeolites. In this progress report, the literature regarding the surfactant‐templating method in zeolites is critically reviewed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hybrid Amino Acid-TiO2 Materials with Tuneable Crystalline Structure and Morphology for Photocatalytic Applications

  • Sarigul, Gamze
  • Chamorro-Mena, Ignacio
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Serrano, Elena
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
A method to produce hybrid organotitanias, both as thin films and suspensions, showing excellent photocatalyic activity in the degradation of organic dyes in aqueous solutions under visible light irradiation is disclosed. This method is based on the in situ incorporation of an amino acid, l-tyrosine, during the synthesis of the titanias owing to its coordination and co-condensation with the titania precursor under acidic conditions. This methodology allows the fine -tuning of their crystalline structure, size, and shape by simply varying the pH of the synthesis gel, leading to anatase nanoparticles of ≈5 nm and surface areas of ≈200 m2 g−1 at pH = 2.2, while highly crystalline rutile nanorods are formed at pH = 0. The incorporation of l-tyrosine to both anatase nanoparticles and rutile nanorods enables these materials to absorb light in the visible range due to both the decrease in their band gap, as compared to the reference materials, and the presence of additional absorption edges at wavelengths higher than 400 nm. Consequently, the photocatalytic activity of both hybrid anatase nanoparticles and rutile nanorods exhibits a 120% enhanced photocatalytic efficiency, as compared to that of l-Tyr-free titanias and the commercial P25, which confirms their potential application in water remediation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biodegradable Poly(ε-Caprolactone) Active Films Loaded with MSU-X Mesoporous Silica for the Release of α-Tocopherol

  • Mellinas-Ciller, Ana-Cristina
  • Ramos, Marina
  • Grau-Atienza, Aida
  • Jordá Sánchez, Anna
  • Burgos, Nuria
  • Jiménez, Alfonso
  • Serrano, Elena
  • Garrigós, María del Carmen
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Grau-Atienza, Aida|||/items/c4516fa7-6035-4389-9725-5908c8fa92ae
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Mellinas-Ciller, Ana-Cristina|||/items/8f6577ab-b8f1-410d-9d1e-fa3fbf1b7f01
  • Ramos, Marina|||/items/e377b5c2-10c4-4900-880e-9cb8be678899
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
In this study, new active PCL (poly(ε-caprolactone)) films containing α-tocopherol (TOC) and MSU-X mesoporous silica were prepared by melt blending. The studied additives were directly incorporated into the polymer matrix or by impregnating TOC into MSU-X silica (PCL-IMP). Thermal, optical, oxygen and water barrier properties as well as oxidation onset parameters, were studied. Films containing MSU-X and/or TOC showed a significant increase in oxidative onset temperature (OOT) and oxidative induction time (OIT), improving thermal stability against materials oxidation by the addition of mesoporous silica and TOC into the polymer matrix. In addition, the effect of MSU-X addition on the migration behaviour of α-tocopherol from active films was investigated at 40 °C using 50% (v/v) ethanol as fatty food simulant, showing PCL-IMP films the lower release content and diffusion coefficient (3.5 × 10−15 cm2 s−1). Moreover, radical scavenging (DPPH and ABTS) and antibacterial activity against E. coli and S. aureus were favoured by the release of α-tocopherol in the developed films. The obtained results have demonstrated the potential of the new PCL-based active formulations for TOC controlled release in antioxidant and antibacterial food packaging applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The Energetics of Surfactant‐Templating of Zeolites

  • Linares, Noemi
  • Jardim, Erika de Oliveira
  • Sachse, Alexander
  • Serrano, Elena
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Mesoporosity can be conveniently introduced into zeolites by treating them in basic surfactant solutions. The apparent activation energy involved in the formation of mesopores in USY by surfactant‐templating was determined using a combination of in situ synchrotron X‐ray diffraction and ex situ gas adsorption. Additionally, techniques such as pH measurement and thermogravimetry/differential thermal analysis were employed to determine OH− evolution and cetyltrimethylammonium ion (CTA+) uptake during the development of mesoporosity, thereby providing information about the different steps involved. The combination of both in situ and ex situ techniques has allowed determination of the apparent activation energies of the different processes involved in the mesostructuring of USY zeolites for the first time. Apparent activation energies are of the same order of magnitude (30–65 kJ mol−1) as those involved in the crystallization of zeolites. Hence, important mechanistic insight into the surfactant‐templating method was obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Consecutive Surfactant-Templating Opens up New Possibilities for Hierarchical Zeolites

  • Jardim, Erika de Oliveira
  • Serrano, Elena
  • Martínez, Juan Carlos
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Intracrystalline mesoporosity can be conveniently introduced in zeolites using cationic surfactants in a mild basic solution –a process known as surfactant-templating. However, this technique is limited to small-headed and single-chain surfactants because they need to diffuse through the narrow micropores of the zeolite, which limits the potential of this approach. Herein, we show that the mesoporosity generated in zeolites with small-headed and single-chain surfactants, such as CTAB, provides enough accessibility to allow the use of bulky surfactants that otherwise cannot enter the structure of the zeolite. Moreover, in this contribution, a USY zeolite has been successively treated with cationic surfactants of different chain lengths (C12 to C22) proving that the mesopores introduced in the zeolite can be efficiently widened and narrowed by consecutive treatments with surfactants of the suitable size. Finally, the use of consecutive surfactant-templating opens up the possibility of using surfactants of different packing parameters to produce new hierarchical architectures in zeolites.