Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rodríguez Navarro, Jorge Andrés|||0000-0002-8359-0397
This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC IAA (IAA/RG85685). N.R. acknowledges the support of the Cambridge International Scholarship and the TrinityHenry Barlow Scholarship (Honorary). O.K.F. and R.Q.S. acknowledge funding from the U.S. Department of Energy (DE-FG02-08ER15967). R.S.F. and D.B. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (SCoTMOF), ERC-2015-StG 677289. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. The authors gratefully acknowledge funding from the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, through the Hydrogen Storage Materials Advanced Research Consortium (HyMARC). This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government. J.D.E. acknowledges the support of the Alexander von Humboldt Foundation and the Center for Information Services and High Performance Computing (ZIH) at TU Dresden. S.K.G. and S.M. acknowledge SERB (Project No. CRG/2019/000906), India for financial support. K.K. and R.K. acknowledge Active Co. Research Grant for funding. S.K. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (COSMOS), ERC-2017-StG 756489. N.L. and J.G.M acknowledge funding from the European Commission through the H2020-MSCA-RISE-2019 program (ZEOBIOCHEM -872102) and the Spanish MICINN and AEI/FEDER (RTI2018-099504-B-C21). N.L. thanks the University of Alicante for funding (UATALENTO17-05). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) S.M.J.R. and A.L. wish to thank the Fund for Scientific Research Flanders (FWO), under grant nos. 12T3519N and 11D2220N. L.S. was supported by the EPSRC Cambridge NanoDTC EP/L015978/1. C.T.Y. and T.S.N. acknowledges funds from the National Research Foundation of Korea, NRF-2017M3A7B4042140 and NRF-2017M3A7B4042235. P.F. and H. Y. acknowledge US Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Award No. DE-SC0010596 (P.F.). R.O. would like to acknowledge funding support during his Ph.D. study from Indonesian Endowment Fund for Education-LPDP with the contract No. 202002220216006. Daniel Siderius: Official contribution of the National Institute of Standards and Technology (NIST), not subject to copyright in the United States of America. Daniel Siderius: Certain commercially available items may be identified in this paper. This identification does not imply recommendation by NIST, nor does it imply that it is the best available for the purposes described. B.V.L, S.T.E and A.M.P acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement no. 639233, COFLeaf)., Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of microand mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This roundrobin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., European Research Council (ERC) ERC-2016-COG 726380 ERC-2015-StG 677289 ERC-2017-StG 756489 639233, UK Research & Innovation (UKRI) Innovate UK 104384 UK Research & Innovation (UKRI), Engineering & Physical Sciences Research Council (EPSRC) IAA/RG85685, Cambridge International Scholarship TrinityHenry Barlow Scholarship, United States Department of Energy (DOE) DE-FG02-08ER15967, National Nuclear Security Administration DE-NA-0003525, United States Department of Energy (DOE), Alexander von Humboldt Foundation, Center for Information Services and High Performance Computing (ZIH) at TU Dresden, Department of Science & Technology (India), Science Engineering Research Board (SERB), India CRG/2019/000906, Active Co. Research Grant, European Commission through the H2020-MSCA-RISE-2019 program ZEOBIOCHEM -872102, Spanish MICINN and AEI/FEDER RTI2018-099504-B-C21, University of Alicante UATALENTO17-05, Spanish Government SEV-2017-0706 FWO 12T3519N 11D2220N, UK Research & Innovation (UKRI), Engineering & Physical Sciences Research Council (EPSRC) EP/L015978/1, National Research Foundation of Korea NRF-2017M3A7B4042140 NRF-2017M3A7B4042235, United States Department of Energy (DOE) DE-SC0010596, Indonesian Endowment Fund for Education-LPDP 202002220216006
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Artificial intelligence reveals unbalanced sustainability domains in funded research

  • Varelas, Panagiotis
  • Larosa, Francesca
  • Contino, Francesco
  • Nerini, Francesco Fuso
  • García-Martínez, Javier
  • Garibo-i-Orts, Óscar
  • Parente, Alessandro
  • Vinuesa, Ricardo
  • Hoyas, Sergio|||0000-0002-8458-7288
  • Conejero, J. Alberto|||0000-0003-3681-7533
[EN] To meet the 2030 Agenda for Sustainable Development, all Sustainable Development Goals (SDGs) must receive adequate and balanced funding. This study applies artificial intelligence to analyze research proposals accepted between 2015 and 2023 in the European Union and the United States, focusing on datasets from the European Research Council and the National Science Foundation, respectively. Despite the growing application of Artificial Intelligence (AI) in various domains, there remains a lack of comprehensive analysis that applies AI to examine funding allocation across SDGs and gender disparities in scientific research. This study addresses this unmet need by using AI to uncover imbalances in funding distribution, offering insights into current funding instruments. We reveal critical coverage disparities across SDGs, with both funding instruments prioritizing SDG 9 (Industry, Innovation, and Infrastructure), highlighting a potential overemphasis on this goal. Additionally, we document pronounced gender imbalances among principal investigators across nearly all SDGs, except for SDG 5 (Gender Equality), in which female researchers are comparatively better represented. Our results indicate an urgent need for more inclusive and balanced approaches to achieve sustainable development, starting with allocation of research funding. By providing a nuanced understanding of funding dynamics and advocating strategic reallocations, this study offers actionable policy design and planning insights to foster a more equitable and comprehensive support system for sustainability-focused research endeavours., PV, AP, and FC acknowledge support from the Energy Transition Fund of Belgium. FL, FFN, and RV acknowledge funding from Digital Futures. FL also acknowledges funding from the European Union's Horizon Europe research and innovation programme under the Marie Sklodowska-Curie grant Agreement No. 101150729. SH is partially funded by project PID2021-128676OB-I00 at Ministerio de Ciencia, Innovation y Universidades/FEDER. JAC was supported by the Generalitat Valenciana, Project PROMETEO CIPROM/2022/21. JGM thanks the funding received from the European Union's Hori-zon 2020 Research and Innovation program under Grant agreement No 872102, the Spanish Ministry of Science, Grant PID2021-1287610B-C21 by MCIN/AEI/10.13039/501100011033 by "ERDF A way of making Europe", the Generalitat Valenciana through CIPROM/2023/2, and the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Leveraging mesoporosity and acidity in interzeolite transformation intermediates for plastic waste valorization

  • Martinez-Ortigosa, Joaquin
  • Tarach, Karolina A.
  • Rogala, Oliwia
  • Linares, Noemi
  • Góra-Marek, Kinga
  • García-Martínez, Javier
[EN] Interzeolite Transformation Intermediates (ITIs) produced by the partial interconversion of FAU to BEA zeolites were systematically investigated as catalysts for the cracking of low-density polyethylene (LDPE) and polystyrene (PS). These materials exhibit a unique combination of structural features, including strong Br & Oslash;nsted acidity and well-developed intracrystalline mesoporosity. Comprehensive characterization by XRD, N2 physisorption, UV-Vis Raman spectroscopy, 27Al MAS NMR, and TEM confirmed their hybrid nature, incorporating elements of both the parent FAU and daughter BEA zeolites. Catalytic performance was benchmarked against fully formed zeolites (FAU, BEA) and a mesoporous aluminosilicate (Al-MCM-41). For LDPE cracking, strong acidity and well-defined microporosity were found to be critical, with conventional zeolites outperforming ITIs. In contrast, ITIs exhibited superior catalytic activity and stability for PS cracking owing to their well-connected mesoporosity and balanced acidity profiles. A key finding of this study is that a catalyst with both large mesoporosity and the strongest acidity is not always the best. For example, PS cracking benefited from catalysts with moderate acidity and high mesoporosity, while LDPE cracking required materials with stronger acid sites. In all cases, ITIs outperformed mesoporous catalysts derived from amorphous precursors, with Al-MCM-41 consistently showing the lowest catalytic activity. Operando FT-IR-GC-MS provided insights into the reaction mechanisms and product distributions, revealing the role of ITIs in enhancing resistance to coking deactivation. ITIs were advantageous for PS dealkylation and for promoting the selective formation of olefins during LDPE cracking. Temperatureprogrammed oxidation (TPO) studies showed that the well-interconnected mesoporosity of ITIs facilitated coke oxidation compared to the poorly interconnected channels of conventional zeolites. These results highlight the potential of ITIs as tailor-made catalysts for plastic waste valorization, with performance tunable by their intermediate structural properties., This project has received funding from the European Union's Horizon 2020 Research and Innovation program under Grant agreement No 872102, the Spanish Ministry of Science, Grant PID2021-1287610B-C21 by MCIN/AEI/10.13039/501100011033 by "ERDF A way of mak-ing Europe", the Generalitat Valenciana through CIPROM/2023/2, and the Advanced Materials programme, supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. J.M-O acknowledges the financial support from the European Union - NextGeneration EU through the Universitat Polcitecnica de Valencia, Ministerio de Universidades, Plan de Recuperacion, Transformacion y Resiliencia for the Margarita Salas grant. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 101008500. KGM, KAT, and OR thank the National Science Centre, Poland [Grant No. 2021/43/B/ST4/00307] . The research was partially carried out using research infrastructure purchased with the funds of the European Union in the framework of the Smart Growth Operational Programme, Measure 4.2; Grant No. POIR.04.02.00-00-D001/20-00, "ATOMIN 2.0 - ATOMic scale science for the INnovative economy".
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Standing on the Shoulders of Giants – Your Mentors and Role Models Will Shape Your Career

  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Choosing the right mentors and role models has a profound impact in both our lives and professional careers; however, most often, not enough time or thought is given to this important decision. Because of that, we may miss some great opportunities and limit the potential benefits. In this invited contribution, I share my personal experience on nurturing the relationship with mentors and on choosing role models with my same values and a strong sense of service.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancing Hydrocracking Catalyst Performance and Lifetime through Surfactant-Templated Mesoporosity in Pt/HUSY Zeolites

  • de Paula, N. F. L.
  • Mesa, H. M.
  • Martínez-Ortigosa, Joaquín
  • Garcia, Marco Aurélio Suller
  • Almeida, João M.A.R. de
  • Garcia-Martinez, Javier
  • Romano, Pedro N.
  • Martínez-Ortigosa, Joaquín|||/items/c2a7ede5-4713-44f4-b931-abb6145b5612
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
The development of catalysts capable of overcoming mass transport limitations remains a crucial challenge in hydrocracking processes, particularly for bulky linear hydrocarbons, such as long-chain paraffins. In this study, we report the synthesis of hierarchical Pt/HUSY catalysts via a surfactant-templating strategy that introduces highly interconnected intracrystalline mesoporosity while preserving most of the zeolite’s crystallinity and acidity, significantly enhancing molecular diffusion, facilitating better access to acid sites, and alleviating the diffusion limitations typically associated with purely microporous zeolites. Catalytic testing revealed a marked increase in hexadecane cracking activity, especially in catalysts with longer surfactant treatment times (Pt/CBV780_20h and Pt/CBV720_41h), which exhibited superior conversion rates and selectivities toward lighter hydrocarbons. Notably, the surfactant-templated catalysts achieved similar product distributions at lower temperatures than those of their parent materials. Additionally, our study demonstrates the importance of well-connected intracrystalline mesoporosity in reducing catalyst deactivation by preventing coke accumulation, particularly in high-aluminum Pt/CBV720 catalysts, which showed higher stability over time despite greater coke deposition. These findings highlight the effectiveness of surfactant-templated mesoporosity as a powerful strategy to enhance both the performance and lifetime of zeolite-based catalysts for industrial hydrocarbon conversion processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surfactant‐Templated Zeolites: From Thermodynamics to Direct Observation

  • Mendoza-Castro, Monica J.
  • Serrano, Elena
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Serrano, Elena|||/items/7cf75abe-28e7-41b3-b2d8-796194364cc4
Surfactant‐templating is a versatile method to introduce tailored intracrystalline mesoporosity in zeolites. This method has been proven to be extremely effective to finely control both the amount of mesoporosity and the size of their mesopores, while maintaining the main features of the original zeolite, such as crystallinity, acidity, and hydrothermal stability. By building on the knowledge generated during the last 30 years in the field of amorphous mesoporous materials, the surfactant‐templating method has been successfully applied to develop intracrystalline mesoporosity into a variety of zeolite structures including FAU, BEA, MOR, LTL, and MFI. The improvement in both the textural and diffusional properties of the zeolite results in excellent catalytic performances in different industrially relevant processes, ranging from fluid catalytic cracking to the synthesis of active pharmaceutical ingredients. As a result of the excellent catalytic performances shown by the surfactant‐templated mesoporous Y zeolite, this is currently being used in several refineries, being the first industrial and large‐scale application of hierarchical zeolites. In this progress report, the literature regarding the surfactant‐templating method in zeolites is critically reviewed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tunable hybrid zeolites prepared by partial interconversion

  • Mendoza-Castro, Monica J.
  • Qie, Zhipeng
  • Fan, Xiaolei
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Zeolite interconversion is a widely used strategy due to its unique advantages in the synthesis of some zeolites. By using a long-chain quaternary amine as both a structure-directing agent and porogen, we have produced superior catalysts, which we named Hybrid Zeolites, as their structures are made of building units of different zeolite types. The properties of these materials can be conveniently tuned, and their catalytic performance can be optimized simply by stopping the interconversion at different times. For cracking the 1,3,5-triisopropylbenzene, Hybrid Zeolites made of FAU and MFI units show a 5-fold increase in selectivity towards the desired product, that is, 1,3-diisopropylbenzene, compared to the commercial FAU, and a 7-fold increase in conversion at constant selectivity compared to MFI zeolite.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Artificial intelligence reveals unbalanced sustainability domains in funded research

  • Varelas, Panagiotis
  • Larosa, Francesca
  • Hoyas, Sergio
  • Conejero, J. Alberto
  • Contino, Francesco
  • Fuso-Nerini, Francesco
  • Garcia-Martinez, Javier
  • Garibo i Orts, Òscar
  • Parente, Alessandro
  • Vinuesa, Ricardo
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
To meet the 2030 Agenda for Sustainable Development, all Sustainable Development Goals (SDGs) must receive adequate and balanced funding. This study applies artificial intelligence to analyze research proposals accepted between 2015 and 2023 in the European Union and the United States, focusing on datasets from the European Research Council and the National Science Foundation, respectively. Despite the growing application of Artificial Intelligence (AI) in various domains, there remains a lack of comprehensive analysis that applies AI to examine funding allocation across SDGs and gender disparities in scientific research. This study addresses this unmet need by using AI to uncover imbalances in funding distribution, offering insights into current funding instruments. We reveal critical coverage disparities across SDGs, with both funding instruments prioritizing SDG 9 (Industry, Innovation, and Infrastructure), highlighting a potential overemphasis on this goal. Additionally, we document pronounced gender imbalances among principal investigators across nearly all SDGs, except for SDG 5 (Gender Equality), in which female researchers are comparatively better represented. Our results indicate an urgent need for more inclusive and balanced approaches to achieve sustainable development, starting with allocation of research funding. By providing a nuanced understanding of funding dynamics and advocating strategic reallocations, this study offers actionable policy design and planning insights to foster a more equitable and comprehensive support system for sustainability-focused research endeavours.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Accelerating the Crystallization of Zeolite SSZ-13 with Polyamines

  • Dai, Heng
  • Claret, Jakob
  • Kunkes, Eduard L.
  • Vattipalli, Vivek
  • Linares, Noemi
  • Huang, Chenfeng
  • Fiji, Muhammad
  • Garcia-Martinez, Javier
  • Moini, Ahmad
  • Rimer, Jeffrey D.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Tailoring processes of nucleation and growth to achieve desired material properties is a pervasive challenge in synthetic crystallization. In systems where crystals form via nonclassical pathways, engineering materials often requires the controlled assembly and structural evolution of colloidal precursors. In this study, we examine zeolite SSZ-13 crystallization and show that several polyquaternary amines function as efficient accelerants of nucleation, and, in select cases, tune crystal size by orders of magnitude. Among the additives tested, polydiallyldimethylammonium (PDDA) was found to have the most pronounced impact on the kinetics of SSZ-13 formation, leading to a 4-fold reduction in crystallization time. Our findings also reveal that enhanced nucleation occurs at an optimal PDDA concentration where a combination of light scattering techniques demonstrate these conditions lead to polymer-induced aggregation of amorphous precursors and the promotion of (alumino)silicate precipitation from growth solution. Here, we show that relatively low concentrations of polymer additives can be used in unique ways to dramatically enhance SSZ-13 crystallization rates, thereby improving the overall efficiency of zeolite synthesis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced activity of a bifunctional Pt/zeolite Y catalyst with an intracrystalline hierarchical pore system in the aqueous-phase hydrogenation of levulinic acid

  • Vu, Hue-Tong
  • Harth, Florian Maximilian
  • Goepel, Michael
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Gläser, Roger
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Mesopores in the range of 4 to 5 nm were introduced into zeolite Y (nSi/nAl = 16) by surfactant-templating. This method using a mixture of octadecyltrimethylammonium hydroxide and bromide (C18TAOH/C18TABr) yields a mesoporous zeolite (Y–C18TAOH) with a higher specific mesopore volume and only a small loss in crystallinity and specific micropore volume. After loading with Pt, the two bifunctional catalysts (2.7Pt/Y and 2.6Pt/Y–C18TAOH) were applied in the aqueous-phase hydrogenation of levulinic acid (LA) to γ–valerolactone (GVL) (pH2 = 2.5 MPa, 393 K). Intraparticle mass–transfer limitations present for the catalyst 2.7Pt/Y were not observed in the LA hydrogenation over the catalyst with the hierarchical pore system 2.6Pt/Y–C18TAOH. Changes in the acid and de-/hydrogenation functionality are shown not to be responsible for the high catalytic activity of 2.6Pt/Y–C18TAOH. The presence of additional mesopores in a bifunctional catalyst based on zeolite Y is proven to enhance the mass-transfer properties and the resulting catalytic activity in the aqueous-phase hydrogenation of LA for the first time.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Combining Electron Microscopy and Elemental Mapping for the Investigation of Zeolite Crystallization

  • Linares, Noemi
  • Chawla, Aseem
  • Li, Rui
  • Rimer, Jeffrey D.
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
An elemental mapping method using electron microscopy with energy dispersive X-ray spectroscopy has proved to be a versatile tool to track the crystallization of zeolites. We have observed that disparities in local concentration of inorganic structure-directing agent (e.g., alkali metal) is an effective indicator of the degree of crystallization in zeolites. In this study, we demonstrate this approach for zeolite ZSM-22 (TON) with very small crystal sizes (<1 μm), where the high spatial resolution of elemental mapping in combination with scanning transmission electron microscopy allows one to obtain a high sensitivity for the detection of early-stage crystals. The crystallization of TON proceeds through a primary alkali rich amorphous phase that evolves to a secondary poorly crystalline phase which already possesses the composition of the final zeolite crystals. This fact gives us the possibility to determine the onset of disorder-to-order transitions in individual crystals of materials, that are amorphous by X-ray diffraction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Engineering Mesopore Formation in Hierarchical Zeolites under High Hydrostatic Pressure

  • Sato, Riku
  • Liu, Zhendong
  • Peng, Ce
  • Tan, Che
  • Hu, Peidong
  • Zhu, Jie
  • Takemura, Masamori
  • Yonezawa, Yasuo
  • Yamada, Hiroki
  • Endo, Akira
  • Garcia-Martinez, Javier
  • Okubo, Tatsuya
  • Wakihara, Toru
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Tailoring the textural properties of porous materials is of paramount importance to optimize their performance in a variety of applications. To this end, critical synthesis parameters influencing crystallization and reorganization of porous materials need to be identified and judiciously controlled. Although the effect of pressure on chemical transformations is ubiquitously present, its impact on fabricating porous materials with tailored physicochemical properties remains unexplored and its potential untapped. In this work, we disclose a detailed study on the effects of high hydrostatic pressure on the formation of well-controlled intracrystalline mesopores in ultrastable Y (USY) zeolite by the so-called surfactant-templating method. The rate of mesopore formation significantly increases upon elevating the pressure, whereas the average size of the mesopores—directed by the self-assembly of the surfactant—decreases. By simultaneously adjusting the external pressure and selecting surfactants of different lengths, we have been able to precisely control the mesopore size in the USY zeolite. Our findings clearly show that external hydrostatic pressure can be used to both accelerate mesopore formation and engineer their size with subnanometer precision. As a second example, we investigated the effect of external pressure on the synthesis of MCM-41. The results on MCM-41, consistent with our observations on the USY zeolite, further confirm that the use of high external pressure greatly affects the self-assembly behaviors of the amphiphilic molecules involved in the synthesis/modification of the porous materials. Our results show that the high-pressure approach represents an untapped opportunity for synthesis/modification of functional porous materials that will likely yield new discoveries in this field.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Process Intensification at the Nanoscale: Embedding SiC in Zeolites for Energy-Efficient Catalysis

  • Young, Alexandre Ferreira
  • Souza, Julia Telles de
  • Costa, Antonio M.L.M.
  • Romano, Pedro N.
  • Garcia-Martinez, Javier
  • Almeida, João M.A.R. de
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Microwave-absorbent materials are typically blended with low-absorption solids to improve local heating efficiency in catalytic systems. However, the mixing method has a crucial effect on the additive’s heating efficiency. We report here how by embedding silicon carbide (SiC) nanoparticles in ferrierite (FER) zeolite crystals during their synthesis (FER@SiC), a 2.2-fold increase in the catalytic activity for mesitylene and benzyl alcohol alkylation was achieved compared to a physical mixture of FER and SiC nanoparticles (FER/SiC). While the properties of the zeolite in the FER@SiC hybrid and SiC-free FER zeolites are almost identical, we observed a significant increase in catalytic activity under microwave heating when SiC is present within FER crystals. This enhancement is not mirrored by the physical mixture, highlighting the importance of the SiC addition method and the intimate contact between the additive and catalytic phases for effective microwave heating. Actually, FER@SiC achieves the same conversion with 40% less energy, offering insights into designing more efficient zeolite-based catalysts for sustainable chemistry.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hierarchical basic zeolites allow for the solvent-free synthesis of chromene derivatives

  • Mendoza-Castro, Monica J.
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
The successful synthesis of 2-amino-chromene with excellent yields (82%) was achieved by utilizing basic hierarchical zeolites prepared by surfactant-templating as catalysts in a multicomponent reaction under solvent-free conditions. The use of these hierarchical zeolites more than doubles the activity of their microporous counterparts. These results highlight the superior diffusivity and performance of hierarchical zeolites, which can be attributed to their well-developed intracrystalline mesoporosity, highly accessible and strong basic sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Correlating Structural Variation with Catalytic Performance of Hierarchical Zeolites Using Ultra-High-Field Solid-State NMR

  • Qie, Zhipeng
  • Hurd, Joseph
  • Linares, Noemi
  • Ou, Xiaoxia
  • Alhelali, Abdullah
  • Al-Lami, Yazen
  • Alhassawi, Hassan
  • Xiang, Huaizhong
  • Zou, Run
  • Franks, W. Trent
  • Jiao, Yilai
  • Holmes, Stuart M.
  • Garforth, Arthur A.
  • Garcia-Martinez, Javier
  • Lee, Daniel
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Ultra-high-field solid-state NMR spectroscopy (1.0 GHz, 23.5 T) was employed to reveal the structural evolution of aluminum species and thus their correlations to catalytic cracking performance of Y zeolites after post-synthetic treatments. Microwave-assisted treatments, including chelating dealumination and NH4OH treatment, induced significant changes in both framework and extra-framework aluminum species. NMR analysis identified that the interaction between extra-framework Al(V/VI) and Brønsted acid sites (BAS) play a crucial role in enhancing catalytic efficiency. The hierarchical zeolite Y-MWNH3-0.1–30 exhibited superior catalytic cracking performance, achieving high yields of light hydrocarbons (C1–C4), and excellent selectivity toward BTX during the cracking of bulky molecules. These findings provide new insights into how post-synthetic modifications can be used to tune aluminum species distribution and acid site interaction, optimizing zeolite catalysts for hydrocarbon conversion performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Chemistry in Transformation: A European Moment

  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Chemistry stands at a pivotal juncture, facing unprecedented expectations to decarbonize, enable circularity, and sustain essential sectors, while remaining globally competitive. Europe embodies these pressures acutely. Although the region excels in frontier research, structural disadvantages such as high energy and feedstock costs, fragmented regulation, slow permitting, and constrained capital limit its capacity to translate scientific leadership into industrial success. The energy crisis of 2022 exposed long-standing vulnerabilities, triggering capacity closures in foundational value chains such as ammonia and olefins and accelerating the erosion of Europe`s market share. Yet chemistry`s transformation is driven not only by economic asymmetry, but by deeper shifts: the urgency of decarbonization, the need for molecular circularity, and the integration of digital technologies into discovery and manufacturing. Breakthroughs in electrification, advanced catalysts, CO2 conversion, self-driving laboratories, and AI-enabled synthesis offer pathways to both competitiveness and sustainability, but their impact depends on coordinated infrastructure, stable policy, and risk-tolerant finance. Crucially, this moment also demands responsibility and resilience: chemistry must be circular by design, transparent in its data, and robust enough to withstand shocks, diversify feedstocks, and scale technologies reliably. Europe`s leadership will hinge on embedding these principles into how chemistry is imagined, taught, and deployed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Spontaneous Pillaring of Pentasil Zeolites

  • Jain, Rishabh
  • Chawla, Aseem
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Rimer, Jeffrey D.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Conventional methods to prepare hierarchical zeolites depend upon the use of organic structure‐directing agents and often require multiple synthesis steps with limited product yield and Brønsted acid concentration. Here, it is shown that the use of MEL‐ or MFI‐type zeolites as crystalline seeds induces the spontaneous formation of self‐pillared pentasil zeolites, thus avoiding the use of any organic or branching template for the crystallization of these hierarchical structures. The mechanism of formation is evaluated by time‐resolved electron microscopy to provide evidence for the heterogeneous nucleation and growth of sequentially branched nanosheets from amorphous precursors. The resulting hierarchical zeolites have large external surface area and high percentages of external acid sites, which markedly improves their catalytic performance in the Friedel–Crafts alkylation and methanol to hydrocarbons reactions. These findings highlight a facile, commercially viable synthesis method to reduce mass‐transport limitations and improve the performance of zeolite catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ultrafast surfactant-templating of *BEA zeolite: An efficient catalyst for the cracking of polyethylene pyrolysis vapours

  • Khalil, Umer
  • Liu, Zhendong
  • Peng, Ce
  • Hikichi, Naomichi
  • Wakihara, Toru
  • Garcia-Martinez, Javier
  • Okubo, Tatsuya
  • Bhattacharya, Sankar
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Introducing intracrystalline mesoporosity to zeolites is an effective way to reduce their diffusion limitations and enhancing their catalytic performance in reactions where large molecules are involved. The emergence of the so-called surfactant-templating technique has enriched the toolbox of methods to prepare mesoporous zeolites, in which amphiphilic molecules are used to assist in and direct the generation of mesopores in a pre-existing zeolite structure under alkaline conditions. We herein present ultrafast surfactant-templating of *BEA zeolite, which is achieved in just a few minutes with a tubular reactor that features fast heating. Two *BEA zeolites of the same Si/Al ratio, but differing in crystal size, are employed to demonstrate the concept. Tuning the interplay between the surfactant concentration and the alkalinity leads to the ultrafast generation of mesoporosity in the *BEA zeolite with the larger crystal size (BEA (L)) in 5 min; while it fails to generate uniform mesopores to the *BEA zeolite with the smaller crystal size (BEA (S)) under otherwise identical conditions. The ultrafast surfactant-templating of *BEA (S) is achieved only when it is partially dealuminated through a pre-treatment with acid. Our results provide new insights on the synergetic effect between the surfactant and the base that governs the surfactant-templating process and on how to produce intracrystalline mesoporosity with narrow pore size distribution under ultrafast conditions (2 min). The resultant mesoporous *BEA zeolites have been tested in the catalytic cracking of the vapours produced by pyrolyzing low-density polyethylene, a promising reaction for converting waste plastics into fuels. Improved selectivity towards aromatic hydrocarbons and light olefins is observed as a result of enhanced accessibility and availability of active sites, validating the superiority of the surfactant-templated *BEA zeolites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David G.
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany M.
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob
  • Marreiros, João
  • Coudert, François-Xavier
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian
  • Huxley, Michael Thomas
  • Evans, Jack D.
  • Bara, Dominic
  • Falcaro, Paolo
  • Ricco, Raffaele
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Yang, Huajun
  • Forgan, Ross S.
  • Furukawa, Shuhei
  • Sanchez, Eli
  • Gascon, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.
  • Mukherjee, Soumya
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir
  • Horcajada, Patricia
  • DeWitt, Stephen J. A.
  • Salcedo-Abraira, Pablo
  • Kaneko, Katsumi
  • Kukobat, Radovan
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-ichi
  • Lively, Ryan P.
  • Llewellyn, Phillip L.
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos
  • Padial, Natalia M.
  • Garcia-Martinez, Javier
  • Linares, Noemi
  • Maspoch, Daniel
  • Rosseinsky, Matthew J.
  • Suárez del Pino, Jose A.
  • Moghadam, Peyman Z.
  • Oktavian, Rama
  • Morris, Russel E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David
  • Katsoulidis, Alexandros P.
  • Schröder, Martin
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel
  • van der Veen, Monique A.
  • Snurr, Randall Q.
  • Goncalves, Rebecca B.
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, Valeska P.
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • Rega, Davide
  • Van Speybroeck, Veronique
  • Rogge, Sven M.J.
  • Lamaire, Aran
  • Walton, Krista S.
  • Bingel, Lukas W.
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar
  • Ania, Conchi O.
  • Zhang, Bing
  • Yavuz, Cafer T.
  • Nguyen, Thien S.
  • Zamora, Félix
  • Montoro, Carmen
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jimenez, David
  • Azevedo, Diana
  • Vilarrasa-García, Enrique
  • Santos, Bianca F.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana
  • Champness, Neil R.
  • Griffin, Sarah L.
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang
  • Clowes, Rob
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Direct Synthesis of Highly Siliceous ZnO-FAU Zeolite with Enhanced Performance in Hydrocarbon Cracking Reactions

  • Parmar, Deependra
  • Mallette, Adam J.
  • Linares, Noemi
  • Saslow, Sarah A.
  • Terlier, Tanguy
  • Strohm, James J.
  • Barber, Lee P.
  • Dai, Heng
  • Garcia-Martinez, Javier
  • Rimer, Jeffrey D.
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
The hydrothermal stability and catalytic activity of zeolite Y (faujasite, FAU) is highly dependent on its composition. High silicon content is often desirable for catalytic applications; however, direct synthesis of faujasite with high silicon content (Si/Al > 2.5) is nontrivial. Here, we present an organic-free synthesis of FAU-type zeolite with Si/Al = 3.4 using zinc oxide as a modifier. A combination of spectroscopy and microscopy techniques confirms that ZnO is well-distributed within zeolite pores as extra-framework species, and the nature of these species differs from bulk ZnO and framework zinc in Zn-FAU crystals. We demonstrate that the increased Si/Al ratio leads to improved hydrothermal stability, while catalytic cracking of 1-hexene and cumene show that ZnO-FAU exhibits a significantly longer lifetime compared to in-house and commercial zeolite Y. Collectively, this study presents a facile and efficient method to prepare more siliceous FAU with enhanced catalytic performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Leveraging mesoporosity and acidity in interzeolite transformation intermediates for plastic waste valorization

  • Martínez-Ortigosa, Joaquín
  • Tarach, Karolina A.
  • Rogala, Oliwia
  • Linares, Noemi
  • Góra-Marek, Kinga
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Martínez-Ortigosa, Joaquín|||/items/c2a7ede5-4713-44f4-b931-abb6145b5612
Interzeolite Transformation Intermediates (ITIs) produced by the partial interconversion of FAU to BEA zeolites were systematically investigated as catalysts for the cracking of low-density polyethylene (LDPE) and polystyrene (PS). These materials exhibit a unique combination of structural features, including strong Brønsted acidity and well-developed intracrystalline mesoporosity. Comprehensive characterization by XRD, N₂ physisorption, UV-Vis Raman spectroscopy, ²⁷Al MAS NMR, and TEM confirmed their hybrid nature, incorporating elements of both the parent FAU and daughter BEA zeolites. Catalytic performance was benchmarked against fully formed zeolites (FAU, BEA) and a mesoporous aluminosilicate (Al-MCM-41). For LDPE cracking, strong acidity and well-defined microporosity were found to be critical, with conventional zeolites outperforming ITIs. In contrast, ITIs exhibited superior catalytic activity and stability for PS cracking owing to their well-connected mesoporosity and balanced acidity profiles. A key finding of this study is that a catalyst with both large mesoporosity and the strongest acidity is not always the best. For example, PS cracking benefited from catalysts with moderate acidity and high mesoporosity, while LDPE cracking required materials with stronger acid sites. In all cases, ITIs outperformed mesoporous catalysts derived from amorphous precursors, with Al-MCM-41 consistently showing the lowest catalytic activity. Operando FT-IR-GC-MS provided insights into the reaction mechanisms and product distributions, revealing the role of ITIs in enhancing resistance to coking deactivation. ITIs were advantageous for PS dealkylation and for promoting the selective formation of olefins during LDPE cracking. Temperature-programmed oxidation (TPO) studies showed that the well-interconnected mesoporosity of ITIs facilitated coke oxidation compared to the poorly interconnected channels of conventional zeolites. These results highlight the potential of ITIs as tailor-made catalysts for plastic waste valorization, with performance tunable by their intermediate structural properties.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Combining Mesoporosity and Shape Selectivity in FAU–MFI Interzeolite Intermediates for Renewable Xylenes Production

  • Campos, Daniela O.
  • Monsores, Anna D. F. F.
  • Suguihiro, Natasha M.
  • Aranda, Donato A. G.
  • Garcia-Martinez, Javier
  • Romano, Pedro N.
  • Almeida, João M.A.R. de
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Interzeolite Transformation Intermediates (ITIs) were synthesized via microwave-assisted conversion of FAU to MFI phases and applied in the transformation of 2,5-dimethylfuran (DMF) and ethanol into xylenes. Structural, textural, and acidic properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), NMR, Raman, and NH3-TPD. Catalytic tests, including Friedel–Crafts alkylation and triisopropylbenzene cracking, revealed that hybridization enhanced molecular accessibility and acid site distribution. The optimized material, HyZ-38, which preserved features of both FAU and MFI, achieved a high xylene yield of 45.2%. This performance was linked to the balance between mesoporosity and shape selectivity, enabling better diffusion and fewer side reactions. Additionally, microwave-assisted synthesis reduced both time and energy consumption. These results underscore the potential of interzeolite transformation as a sustainable strategy for designing efficient catalysts for biomass valorization and renewable aromatic production under demanding reaction conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Micelle Formation inside Zeolites: A Critical Step in Zeolite Surfactant-Templating Observed by Raman Microspectroscopy

  • Fleury, Guillaume
  • Mendoza-Castro, Monica J.
  • Linares, Noemi
  • Roeffaers, Maarten B.J.
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Micelle formation inside faujasite (FAU) zeolite, a critical step in the introduction of mesoporosity in zeolites by surfactant templating, has been confirmed by both 13C NMR and Raman spectroscopy. Here we provide unambiguous evidence of the incorporation of surfactant molecules inside zeolites during the first step of the surfactant-templating process followed by their self-assembly into micelles after hydrothermal treatment. The homogeneous presence of these micelles throughout zeolite crystals has been directly observed by Raman microspectroscopy, confirming the uniform incorporation of mesoporosity in zeolites by surfactant templating.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hierarchical Catalysts Prepared by Interzeolite Transformation

  • Mendoza-Castro, Monica J.
  • Jardim, Erika de Oliveira
  • Ramírez-Marquez, Nelcari-Trinidad
  • Trujillo, Carlos Alexander
  • Linares, Noemi
  • Garcia-Martinez, Javier
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
  • Ramírez-Marquez, Nelcari-Trinidad|||/items/ca2b21a2-0a83-4159-b68c-c76e0943ad43
Interzeolite transformation has been used to produce a novel family of hierarchical catalysts featuring excellent textural properties, strong acidity, and superior catalytic performance for the Friedel–Crafts alkylation of indole with benzhydrol, the Claisen–Schmidt condensation of benzaldehyde and hydroxyacetophenone, and the cracking of polystyrene. Intermediate solids of the FAU interzeolite transformation into BEA display both increased accessibility─due to the development of mesoporosity─and strong acidity─caused by the presence of ultrasmall crystals or zeolitic fragments in their structure. The use of surfactants allows for the development of the hierarchical catalysts with very narrow pore size distribution. The properties of interzeolite transformation intermediates (ITIs) can be fine-tuned simply by stopping the interconversion at different times.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mechanisms and design of heterogenized molecular catalysts for CO₂-to-alcohols

  • Siddiqui, Muhammad Umer
  • Wang, Yilin
  • Sun, Baochang
  • Tan, Xinyi
  • Ke, Zhengang
  • Liu, Xinghuan
  • Garcia-Martinez, Javier
  • Robertson, Alex W.
  • Sun, Zhenyu
  • Garcia-Martinez, Javier|||/items/421c2466-c63a-45d7-b799-c59d51faf1bc
Heterogenized molecular catalysts open electrochemical CO₂ reduction pathways that are not accessible with just homogeneous complexes or extended metal surfaces. This review examines how macrocyclic metal‑nitrogen (MN4) active sites, when fixed onto conductive supports, can be tailored to support the multi-electron, multi-proton processes necessary for producing alcohols. Instead of categorizing catalyst types, we focus on the mechanistic limitations that influence the selectivity for methanol, ethanol, and propanol. We analyze how factors such as the CO binding energy, the duration that intermediates remain, the kinetics of proton-coupled electron transfer, the local availability of CO₂, and entropic influences all collectively shape the reaction results. Six interconnected catalyst design strategies, including support and axial coordination, macrocycle framework engineering, geometry modulation through strain, dual-site and tandem architectures, nanoconfinement, and microenvironment control, are critically evaluated for their effectiveness at stabilizing deep reduction intermediates while minimizing competing reaction pathways. Deactivation mechanisms, including structural degradation, active site poisoning, detachment, and metal contamination, are further examined alongside stabilization strategies to guide the development of durable heterogenized molecular systems. By integrating mechanistic insights with materials design principles, we establish structure-function relationships that define operational windows for alcohol selectivity and outline practical considerations for translating CO-selective molecular platforms toward efficient CO2 to alcohol electrosynthesis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ionic conductivity detection as a water-insensitive alternative for NH3-TPD acidity measurements in zeolites

  • Ramírez-Marquez, Nelcari-Trinidad
  • Such-Basañez, Ion
  • Linares, Noemi
  • Trujillo, Carlos Alexander
  • Ramírez-Marquez, Nelcari-Trinidad|||/items/ca2b21a2-0a83-4159-b68c-c76e0943ad43
  • Linares, Noemi|||/items/b74614e6-be98-4729-84e5-256605124c99
Reliable quantification of zeolite acidity by ammonia temperature-programmed desorption (NH3-TPD) is often hindered by the presence of water, particularly in ammonium-exchanged zeolites where water desorption and ammonium decomposition occur concurrently. In such systems, differential detectors such as thermal conductivity (TCD) and mass spectrometry (MS) exhibit significant interference: premature signal onset, peak broadening, and shifts to lower temperatures, ultimately leading to an overestimation of acidity. In this work, we evaluate the performance of TCD, MS, and an ionic conductivity detector (ICD) for NH3-TPD measurements of ammonium- and protonic-Y zeolites (CBV300, CBV720, CBV780). The ICD provides a selective, water-insensitive response, detecting only ammonia that is dissolved and ionized as NH4+ in boric acid solution. As a result, the ICD successfully quantifies acidity in non-activated ammonium zeolites, where TCD and MS responses are affected by water. For activated zeolites saturated with ammonia, all detectors produce comparable desorption profiles; however, MS exhibits the lowest noise-to-signal ratio, followed by ICD, while TCD shows the poorest stability. These results demonstrate that the ICD is a robust, cost-effective, and water-insensitive detector that significantly extends the applicability of NH3-TPD to zeolites previously considered incompatible with the technique.
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

How reproducible are surface areas calculated from the BET equation?

  • Osterrieth, Johannes W. M.
  • Zamora Abanades, Félix Juan
  • Montoro Cano, María del Carmen
Artículo escrito por un elevado número de autores, solo se referencian el que aparece en primer lugar, el nombre del grupo de colaboración, si le hubiere, y los autores pertenecientes a la UAM, Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How Reproducible are Surface Areas Calculated from the BET Equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob
  • Marreiros, João
  • Bara, Dominic
  • Furukawa, Shuhei
  • Sánchez, Eli
  • Gascón, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.
  • Mukherjee, Soumya
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir
  • Horcajada, Patricia
  • DeWitt, Stephen J. A.
  • Salcedo Abraira, Pablo
  • Kaneko, Katsumi
  • Kukobat, Radovan
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-Ichi
  • Lively, Ryan P.
  • Llewellyn, Phillip
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos
  • Padial, Natalia M.
  • García-Martínez, Javier
  • Linares, Noemí
  • Maspoch, Daniel
  • Rosseinsky, Matthew J.
  • Suárez, José Antonio
  • Moghadam, Peyman
  • Oktavian, Rama
  • Morris, Russell E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David
  • Katsoulidis, Alexandros P.
  • Schröder, Martin
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel
  • Veen, Monique A. van der
  • Snurr, Randall Q.
  • Goncalves, Rebecca B.
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, Valeska P.
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • Rega, Davide
  • Speybroeck, Veronique van
  • Rogge, Sven M. J.
  • Lamaire, Aran
  • Walton, Krista S.
  • Bingel, Lukas W.
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar
  • Ania, Conchi O.
  • Zhang, Bing
  • Yavuz, Cafer T.
  • Nguyen, Thien S.
  • Zamora, Félix
  • Montoro, Carmen
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jiménez, David
  • Azevedo, Diana
  • Vilarrasa-García, E.
  • Santos, Bianca S.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana
  • Champness, Neil R.
  • Griffin, Sarah L.
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang
  • Clowes, Rob
  • Coudert, François Xavier
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian J.
  • Huxley, Michael Thomas
  • Evans, Jack D.
  • Falcaro, Paolo
  • Ricco, Raffaele
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Chang, Huajun
  • Forgan, Ross S.
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (NanoMOFdeli), ERC-2016-COG 726380, Innovate UK (104384) and EPSRC IAA (IAA/RG85685). N.R. acknowledges the support of the Cambridge International Scholarship and the Trinity-Henry Barlow Scholarship (Honorary). O.K.F. and R.Q.S. acknowledge funding from the U.S. Department of Energy (DE-FG02-08ER15967). R.S.F. and D.B. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (SCoTMOF), ERC-2015-StG 677289. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525. The authors gratefully acknowledge funding from the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, through the Hydrogen Storage Materials Advanced Research Consortium (HyMARC). J.D.E. acknowledges the support of the Alexander von Humboldt Foundation and the Center for Information Services and High Performance Computing (ZIH) at TU Dresden. S.K.G. and S.M. acknowledge SERB (Project No. CRG/2019/000906), India for financial support. K.K. and R.K. acknowledge Active Co. Research Grant for funding. S.K. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (COSMOS), ERC-2017-StG 756489. N.L. and J.G.M acknowledge funding from the European Commission through the H2020-MSCA-RISE-2019 program (ZEOBIOCHEM – 872102) and the Spanish MICINN and AEI/FEDER (RTI2018-099504-B-C21). N.L. thanks the University of Alicante for funding (UATALENTO17-05). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) S.M.J.R. and A.L. wish to thank the Fund for Scientific Research Flanders (FWO), under grant nos. 12T3519N and 11D2220N. L.S. was supported by the EPSRC Cambridge NanoDTC EP/L015978/1. C.T.Y. and T.S.N. acknowledges funds from the National Research Foundation of Korea, NRF-2017M3A7B4042140 and NRF-2017M3A7B4042235. P.F. and H. Y. acknowledge US Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Award No. DE-SC0010596 (P.F.). R.O. would like to acknowledge funding support during his Ph.D. study from Indonesian Endowment Fund for Education-LPDP with the contract No. 202002220216006. B.V.L, S.T.E and A.M.P acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (Grant agreement no. 639233, COFLeaf).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Membranes of polymer of intrinsic microporosity PIM-1 for gas separation: Modification strategies and meta-analysis

  • Qiu, Boya
  • Gao,Yong
  • Gorgojo, Patricia
  • Fan, Xiaolei
Polymers of intrinsic microporosity (PIMs) have received considerable attention for making high-performance membranes for carbon dioxide separation over the last two decades, owing to their highly permeable porous structures. However, challenges regarding its relatively low selectivity, physical aging, and plasticisation impede relevant industrial adoptions for gas separation. To address these issues, several strategies including chain modification, post-modification, blending with other polymers, and the addition of fillers, have been developed and explored. PIM-1 is the most investigated PIMs, and hence here we review the state-of-the-arts of the modification strategies of PIM-1 critically and discuss the progress achieved for addressing the aforementioned challenges via meta-analysis. Additionally, the development of PIM-1-based thin film composite membranes is commented as well, shedding light on their potential in industrial gas separation. We hope that the review can be a timely snapshot of the relevant state-of-the-arts of PIMs guiding future design and optimisation of PIMs-based membranes for enhanced performance towards a higher technology readiness level for practical applications., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 872102. B.Q. thanks to the China Scholarship Council (CSC, file no. 202006240076)-University of Manchester joint studentship for supporting the PhD research. Y.G. and X.F. also thanks the special innovation project fund from the Institute of Wenzhou, Zhejiang University (No. XMGL-KJZX-202204)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

GO as gutter layer in superglassy thin film composite membranes for enhanced gas separation

  • Qiu, Boya
  • Yu, Ming
  • Alshurafa, Mustafa
  • López-Porfiri, Pablo
  • Pérez-Page, María
  • Foster, Andrew B.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
Polymers with intrinsic microporosity (PIM) have gathered considerable attention over the last two decades for fabricating high-performance membranes for CO2 separation, owing to their highly permeable and porous structures. Particularly, thin film composite (TFC) membranes with thin active layers (<5 μm) deposited onto more porous substrates are suitable for practical applications as they offer a combination of high permeance and mechanical strength. However, penetration of the active layer into the pores of the substrate leads to additional mass transfer resistance and creates defects and voids, thereby reducing the membrane's permeance and selectivity. Herein, we introduced graphene oxide (GO) as a gutter layer in TFCs made with PIM-1. GO flakes were deposited to cover the substrates partially, thereby reducing polymer penetration while maintaining good structural integrity of the TFCs. We successfully fabricated a series of PIM-1 TFCs by kiss coating, with the thinnest active layer at ∼179 nm. These TFCs exhibited an ideal selectivity for CO2/N2 of 44.4, and the CO2 permeance was increased by up to 104 % under optimised conditions. The strategy is generic as well which was validated using carboxylated PIM-1 (cPIM-1)., P.G. is grateful to the Spanish Ministerio de Economía y Competitividad and the European Social Fund for her Ramon y Cajal Fellowship (RYC2019-027060-I/AEI/10.13039/501100011033). B.Q. thanks to the China Scholarship Council (CSC, file no. 202006240076)-University of Manchester joint studentship for supporting the PhD research. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 872102. A.B.F. is supported by EPSRC Programme Grant “SynHiSel” (EP/V047078/1)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Membranes of Polymer of Intrinsic Microporosity PIM-1 for Gas Separation: Modification Strategies and Meta-Analysis

  • Qiu, Boya
  • Gao, Yong
  • Gorgojo, Patricia
  • Fan, Xiaolei
Polymers of intrinsic microporosity (PIMs) have received considerable attention for making high-performance membranes for carbon dioxide separation over the last two decades, owing to their highly permeable porous structures. However, challenges regarding its relatively low selectivity, physical aging, and plasticisation impede relevant industrial adoptions for gas separation. To address these issues, several strategies including chain modification, post-modification, blending with other polymers, and the addition of fillers, have been developed and explored. PIM-1 is the most investigated PIMs, and hence here we review the state-of-the-arts of the modification strategies of PIM-1 critically and discuss the progress achieved for addressing the aforementioned challenges via meta-analysis. Additionally, the development of PIM-1-based thin film composite membranes is commented as well, shedding light on their potential in industrial gas separation. We hope that the review can be a timely snapshot of the relevant state-of-the-arts of PIMs guiding future design and optimisation of PIMs-based membranes for enhanced performance towards a higher technology readiness level for practical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

GO as gutter layer in superglassy thin film composite membranes for enhanced gas separation

  • Qiu, Boya
  • Yu, Ming
  • Alshurafa, Mustafa
  • López-Porfiri, Pablo
  • Perez-Page, María
  • Foster, Andrew B.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
Polymers with intrinsic microporosity (PIM) have gathered considerable attention over the last two decades for fabricating high-performance membranes for CO2 separation, owing to their highly permeable and porous structures. Particularly, thin film composite (TFC) membranes with thin active layers (<5 μm) deposited onto more porous substrates are suitable for practical applications as they offer a combination of high permeance and mechanical strength. However, penetration of the active layer into the pores of the substrate leads to additional mass transfer resistance and creates defects and voids, thereby reducing the membrane's permeance and selectivity. Herein, we introduced graphene oxide (GO) as a gutter layer in TFCs made with PIM-1. GO flakes were deposited to cover the substrates partially, thereby reducing polymer penetration while maintaining good structural integrity of the TFCs. We successfully fabricated a series of PIM-1 TFCs by kiss coating, with the thinnest active layer at ∼179 nm. These TFCs exhibited an ideal selectivity for CO2/N2 of 44.4, and the CO2 permeance was increased by up to 104 % under optimised conditions. The strategy is generic as well which was validated using carboxylated PIM-1 (cPIM-1).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

How reproducible are surface areas calculated from the BET equation?

  • Osterrieth, Johannes W. M.
  • Rampersad, James
  • Madden, David
  • Rampal, Nakul
  • Skoric, Luka
  • Connolly, Bethany
  • Allendorf, Mark D.
  • Stavila, Vitalie
  • Snider, Jonathan L.
  • Ameloot, Rob|||0000-0003-3178-5480
  • Marreiros, João|||0000-0002-4898-2096
  • Ania, Conchi|||0000-0001-9517-8132
  • Azevedo, Diana
  • Vilarrasa-Garcia, E.|||0000-0003-4190-8763
  • Santos, Bianca F.
  • Bu, Xian-He
  • Chang, Ze
  • Bunzen, Hana|||0000-0003-1824-0291
  • Champness, Neil|||0000-0003-2970-1487
  • Griffin, Sarah|||0000-0003-4872-983X
  • Chen, Banglin
  • Lin, Rui-Biao
  • Coasne, Benoit|||0000-0002-3933-9744
  • Cohen, Seth
  • Moreton, Jessica C.
  • Colón, Yamil J.
  • Chen, Linjiang|||0000-0002-0382-5863
  • Clowes, Rob
  • Coudert, François-Xavier|||0000-0001-5318-3910
  • Cui, Yong
  • Hou, Bang
  • D'Alessandro, Deanna M.
  • Doheny, Patrick W.|||0000-0003-1705-8850
  • Dincă, Mircea
  • Sun, Chenyue
  • Doonan, Christian|||0000-0003-2822-0956
  • Huxley, Michael Thomas
  • Evans, Jack D.|||0000-0001-9521-2601
  • Falcaro, Paolo|||0000-0001-5935-0409
  • Riccò, Raffaele|||0000-0002-0296-9398
  • Farha, Omar
  • Idrees, Karam B.
  • Islamoglu, Timur
  • Feng, Pingyun
  • Yang, Huajun
  • Forgan, Ross|||0000-0003-4767-6852
  • Bara, Dominic
  • Furukawa, Shuhei|||0000-0003-3849-8038
  • Sanchez, Eli
  • Gascon, Jorge
  • Telalović, Selvedin
  • Ghosh, Sujit K.|||0000-0002-1672-4009
  • Mukherjee, Soumya|||0000-0003-2375-7009
  • Hill, Matthew R.
  • Sadiq, Muhammed Munir|||0000-0002-5326-6158
  • Horcajada, Patricia|||0000-0002-6544-5911
  • Salcedo-Abraira, Pablo|||0000-0003-4812-8938
  • Kaneko, Katsumi
  • Kukobat, Radovan|||0000-0003-4620-9451
  • Kenvin, Jeff
  • Keskin, Seda
  • Kitagawa, Susumu
  • Otake, Ken-ichi|||0000-0002-7904-5003
  • Lively, Ryan P.
  • DeWitt, Stephen J.A.
  • Llewellyn, Phillip
  • Lotsch, Bettina V.
  • Emmerling, Sebastian T.|||0000-0002-1558-2547
  • Pütz, Alexander M.
  • Martí-Gastaldo, Carlos|||0000-0003-3203-0047
  • Padial, Natalia M.|||0000-0001-6067-3360
  • Garcia-Martinez, Javier|||0000-0002-7089-4973
  • Linares, Noemi|||0000-0001-9376-2984
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Moghadam, Peyman
  • Oktavian, Rama|||0000-0003-0701-4213
  • Morris, Russel E.
  • Wheatley, Paul S.
  • Navarro, Jorge
  • Petit, Camille
  • Danaci, David|||0000-0002-7203-9655
  • Rosseinsky, Matthew J.
  • Katsoulidis, Alexandros P.|||0000-0003-0860-7440
  • Schröder, Martin|||0000-0001-6992-0700
  • Han, Xue
  • Yang, Sihai
  • Serre, Christian
  • Mouchaham, Georges|||0000-0001-8696-9733
  • Sholl, David S.
  • Thyagarajan, Raghuram
  • Siderius, Daniel W.|||0000-0002-6260-7727
  • Snurr, Randall Q.
  • Barbosa Goncalves, Rebecca|||0000-0001-5008-7798
  • Telfer, Shane
  • Lee, Seok J.
  • Ting, V.P.|||0000-0003-3049-0939
  • Rowlandson, Jemma L.
  • Uemura, Takashi
  • Iiyuka, Tomoya
  • van der Veen, Monique
  • Rega, Davide
  • Van Speybroeck, Veronique|||0000-0003-2206-178X
  • Rogge, Sven M.J.|||0000-0003-4493-5708
  • Lamaire, Aran|||0000-0003-0093-5490
  • Walton, Krista S.
  • Bingel, Lukas|||0000-0001-9839-886X
  • Wuttke, Stefan
  • Andreo, Jacopo
  • Yaghi, Omar M.
  • Zhang, Bing
  • Yavuz, Cafer Tayyar
  • Nguyen, Thien S.
  • Zamora, Félix|||0000-0001-7529-5120
  • Montoro, Carmen|||0000-0003-4984-2973
  • Zhou, Hongcai
  • Kirchon, Angelo
  • Fairen-Jimenez, David|||0000-0002-5013-1194
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called "BET surface identification" (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.