Pasar al contenido principal

Development of novel membranes with improved performance for their application in molecular separations of industrial relevance

RYC2019-027060-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-flux thin film composite PIM-1 membranes for butanol recovery: Experimental study and process simulations

  • Contreras-Martínez, Jorge
  • Mohsenpour, Sajjad
  • Ameen, Ahmed W.
  • Budd, Peter M.
  • García-Payo, Carmen
  • Khayet, Mohamed
  • Gorgojo, Patricia
Thin film composite (TFC) membranes of the prototypical polymer of intrinsic microporosity (PIM-1) have been prepared by dip-coating on a highly porous electrospun polyvinylidene fluoride (PVDF) nanofibrous support. Prior to coating, the support was impregnated in a non-solvent to avoid the penetration of PIM-1 inside the PVDF network. Different non-solvents were considered and the results were compared with those of the dry support. When applied for the separation of n-butanol/water mixtures by pervaporation (PV), the developed membranes exhibited very high permeate fluxes, in the range of 16.1–35.4 kg m–2 h–1, with an acceptable n-butanol/water separation factor of about 8. The PV separation index (PSI) of the prepared membranes is around 115, which is among the highest PSI values that have been reported so far. Hybrid PV-distillation systems have been designed and modeled in Aspen HYSYS using Aspen Custom Modeler for setting up the PIM-1 TFC and commercial PDMS membranes as a benchmark. The butanol recovery cost for the hybrid systems is compared with a conventional stand-alone distillation process used for n-butanol/water separation, and a 10% reduction in recovery cost was obtained., J.C.-M. is thankful for the grant received from the Spanish Ministry of Economy and Competitiveness and the European Social Fund. M.K., C.G.-P., and J.C.-M. appreciate the financial support from Spanish Ministry of Economy and Competitiveness through its project CTM2015-65348-C2-2-R and the Spanish Ministry of Science, Innovation, and Universities through its project RTI2018-096042-B-C22. S.M. thanks The University of Manchester for funding his Ph.D. studies. P.G. acknowledges the Spanish Ministry of Economy and Competitiveness and the European Social Fund through the Ramon y Cajal program (RYC2019-027060-I/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PIM-1/holey graphene oxide mixed matrix membranes for gas separation: Unveiling the role of holes

  • Luque-Alled, José Miguel
  • Tamaddondar, Marzieh
  • Foster, Andrew B.
  • Budd, Peter M.
  • Gorgojo, Patricia
PIM-1/holey graphene oxide (GO) mixed matrix membranes (MMMs) have been prepared and their gas separation performance for CO2/CH4 mixtures assessed. Nanopores have been created in the basal plane of gas-impermeable GO by chemical etching reactions, and the resulting holey flakes have been further chemically functionalized, either with octadecylamine (ODA) or with PIM-1 moieties, to aid their dispersion in PIM-1. It is found that nanopores barely promote gas transport through the graphene-like nanofiller for fresh membranes (tested right after preparation); however, the prepared hybrid PIM-1/holey GO membranes exhibit higher CO2 permeability and CO2/CH4 selectivity than the pure polymer membrane 150 days after preparation and 13 and 15% higher CO2 permeability for filler contents of 0.1% of octadecylamine-functionalized holey GO and 1% of (PIM-1)-functionalized holey GO, respectively. The most significant improvement is observed for the mitigation of physical aging, as MMMs using 10% of (PIM-1)-functionalized holey GO nanofillers are capable of maintaining up to 70% of their initial CO2 permeability after 150 days, whereas only 53% is kept for pure PIM-1 after the same period. The gas permeability of the nanofiller has been rationalized with the aid of the Maxwell–Wagner–Sillars equation., The authors are grateful to EPSRC for funding under grant numbers EP/K016946/1 and EP/M01486X/1. J. M. Luque-Alled is grateful to the Department of Chemical Engineering and Analytical Science─The University of Manchester for funding his Ph.D. studies. P. Gorgojo acknowledges the Spanish Ministry of Economy and Competitiveness and the European Social Fund through the Ramon y Cajal programme (RYC2019-027060-I/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adsorption desalination: Advances in porous adsorbents

  • Qiu, Boya
  • Gorgojo, Patricia
  • Fan, Xiaolei
With the continuous growth of the world population, the demand for fresh water is ever increasing. Water desalination is a means of producing fresh water from saline water, and one of the proposed solutions in the scientific community for solving the current global freshwater shortage. Adsorption is foreseen as a promising technology for desalination due to its relatively low energy requirements, low environmental impact, low cost and high salt removal efficiency. More importantly, chemicals are not required in adsorption processes. Active carbons, zeolites, carbon nanostructures, graphene and coordination framework materials are amongst the most investigated adsorbents for adsorption desalination, which show different performances regarding adsorption rate, adsorption capacity, stability and recyclability. In this review, the latest adsorbent materials with their features are assessed (using metrics) and commented critically, and the current trend for their development is discussed. The adsorption mode is also reviewed, which can provide guidance for the design of adsorbents from the engineering application point of view., Patricia Gorgojo is grateful to the Spanish Ministerio de Economía y Competitividad and the European Social Fund for her Ramon y Cajal Fellowship (RYC2019-027060-I/AEI/10.13039/501100011033). B.Q. thanks the China Scholarship Council (202006240076)-University of Manchester joint studentship for supporting her PhD research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of graphene oxide in the formation of polymeric asymmetric membranes via phase inversion

  • Mohsenpour, Sajjad
  • Leaper, Sebastian
  • Shokri, Javad
  • Alberto, Monica
  • Gorgojo, Patricia
Membrane morphology of integrally skinned asymmetric membranes made by phase inversion can be tailored by precise control of the thermodynamic properties of the casting solution. In this work, the morphology of polyethersulfone (PES) and polyvinylidene fluoride (PVDF) membranes containing graphene oxide (GO) and their phase separation behavior have been studied. The Flory-Huggins theory and the Hansen solubility parameters have been used to construct theoretical binodal lines for ternary and quaternary systems, which have been validated by conducting cloud titration experiments. Moreover, the effect of different solvents on the morphology of PES membranes is discussed through the thermodynamic and kinetic properties of the casting solutions. Nontoxic solvents dimethyl sulfoxide (DMSO) and dihydrolevoglucosenone (Cyrene™) induce PES/GO membranes with finger-like pores and cellular voids, respectively. The addition of GO in the PES and the PVDF casting solutions increases their thermodynamic instability, leading to thinner selective top layers and higher porosities, up to a point where the high viscosity of the GO-containing solutions hinders the solvent-nonsolvent demixing. The highest porosity and pure water flux (PWF) occurs at 0.1 wt% GO for PES/GO/DMSO and at a loading of 0.3 wt% GO for systems PES/GO/Cyrene and PVDF/GO., S. Mohsenpour and J. Shokri thank the University of Manchester for funding their Ph.D studies. P. Gorgojo acknowledges the Spanish Ministry of Economy and Competitiveness and the European Social Fund through the Ramon y Cajal programme (RYC2019-027060-I/AEI/10.13039/501100011033). The authors are also grateful to the EPSRC for funding under the grant number EP/S032258/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green supported liquid membranes: The permeability activity-based linear operation (PABLO) method

  • López-Porfiri, Pablo
  • González-Miquel, María
  • Gorgojo, Patricia
Supported liquid membranes (SLMs) containing novel green solvents are proposed as a sustainable alternative separation process in the recovery of biomolecules. In this work, succinic acid has been successfully extracted from model fermentation broths through a stripping phase-facilitated transport mechanism with four different green supported liquid membranes: two eutectic solvents (DL-menthol:OctA and N4444Cl:OctA), the bio-based solvent eucalyptol and the ionic liquid [C4pyrr][Tf2N]. A permeability activity-based model that takes into account for the first time solute-phase affinities has been developed using the quantum chemical COSMO-RS method; the model corrects the mass transfer driving force and allows extraction predictions beyond the concentration equilibrium. The best recovery has been achieved experimentally for the eucalyptol-based SLM (concentration factor of 1.4) using an alkaline aqueous solution (0.5 M NaOH) as the stripping phase. A countercurrent cascade extraction process design is proposed, and a graphical method to determine the stage number, interstage concentrations as well as mass transfer area requirements is presented. This new tool, the Permeability Activity-Based Linear Operation (PABLO) method, will substantially enhance the process design of SLMs technology for the biorefinery industry., This work was funded by the CONICYT PFCHA/DOCTORADO BECAS CHILE/2017 – 72180306. P. Gorgojo acknowledges the Spanish Ministry of Economy and Competitiveness and the European Social Fund through the Ramon y Cajal programme (RYC2019-027060-I/AEI/10.13039/501100011033). M. González-Miquel acknowledges Madrid Government (Comunidad de Madrid-Spain) for funding through the Multiannual Agreement with Universidad Politécnica de Madrid under the Excellence Programme for University Professors, in the context of the V PRICIT (Regional Programme of Research and Technological Innovation)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilized graphene oxide-based membranes for improved pore wetting resistance in membrane distillation

  • Alberto, Monica
  • Skuse, Clara
  • Tamaddondar, Marzieh
  • Gorgojo, Patricia
Membrane distillation (MD) is a useful method for the purification of difficult feedwaters but it cannot be applied in a range of industries due to pore wetting. In this work, graphene oxide (GO) laminate coatings are explored to overcome the pore wetting issues. Air gap MD (AGMD) configuration was considered, using a 35 g L−1 NaCl solution with 150 mg L−1 (150 ppm) of Triton X-100 surfactant as feed material. The GO is deposited as a laminate membrane on top of a commercial porous polyvinylidene fluoride (PVDF) support and good adhesion is achieved through the use of polydopamine (PDA) to form a hydrophilic tri-layer membrane. The small pore size achieved with the laminate GO led to increased pore wetting resistance for at least 90 h compared to 20 min with pristine commercial PVDF. Additionally, the extra layers of GO and PDA did not affect the membrane flux. Overall, a tri-layer immobilized GO membrane is synthesized with superior performance when compared to current commercial membranes, meaning that MD can be used for a new range of wastewater applications., The authors acknowledge the Engineering and Physical Sciences Research Council (EPSRC) grant EP/S032258/1 for supporting this work. Clara Skuse would like to acknowledge the EPSRC for funding this work through the NOWNANO CDT. Patricia Gorgojo is grateful to the Spanish Ministerio de Economía y Competitividad and the European Social Fund for her Ramón y Cajal Fellowship (RYC2019-027060-I/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PIM-1 membranes containing POSS - graphene oxide for CO2 separation

  • Mohsenpour, Sajjad
  • Ameen, Ahmed W.
  • Leaper, Sebastian
  • Skuse, Clara
  • Almansour, Faiz
  • Budd, Peter M.
  • Gorgojo, Patricia
PIM-1 mixed matrix membranes (MMMs) were fabricated with polyhedral oligomeric silsesquioxane (POSS) and graphene oxide (GO) functionalized with POSS (GO-POSS), and tested for CO2/N2 (single gas) and CO2/CH4 (1:1, v:v gas mixture). The CO2 permeability of the best performing fresh MMM (containing 0.05 wt% GO-POSS) was ∼ 12000 Barrer, which is 69% higher than that of the neat PIM-1 membrane, with about the same selectivity (CO2/CH4 selectivity ∼ 12 and CO2/N2 selectivity ∼ 20). In both cases, the gas separation data surpass the 2008 Robeson upper bound. In addition to the initial CO2 permeability enhancement, the use of GO-POSS is an efficient strategy to slow down physical aging. The MMM at a filler loading of 0.75 wt% showed less than half of the reduction in CO2 permeability than the neat PIM-1 membrane 160 days after preparation (26% for the MMM vs 58% for the purely polymeric one)., S. Mohsenpour thanks the University of Manchester for funding his Ph.D. studies. P. Gorgojo acknowledges the Spanish Ministry of Economy and Competitiveness and the European Social Fund through the Ramon y Cajal programme (RYC2019-027060-I/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous silica nanosheets in PIM-1 membranes for CO2 separation

  • Mohsenpour, Sajjad
  • Guo, Zunmin
  • Almansour, Faiz
  • Holmes, Stuart M.
  • Budd, Peter M.
  • Gorgojo, Patricia
PIM-1-based freestanding mixed matrix membranes (MMMs) and thin film nanocomposites (TFNs) were prepared by incorporating porous silica nanosheets (SN) and exfoliated SN (E-SN) derived from natural vermiculite (Verm) in the PIM-1 polymer matrix. In addition, SN were functionalized by sulfonic acid and amine groups (S-SN and N-SN, respectively) and were also used as fillers for the preparation of MMMs. The gas separation performance was evaluated using CO2/CH4 and CO2/N2 (1:1, v:v) binary gas mixtures. Among freestanding membranes, fresh ones (i.e. tested right after preparation) containing 0.05 wt% functionalized SN and E-SN outperformed the neat PIM-1, surpassing the 2008 Robeson upper bound. At the same filler concentration, fresh MMMs with sulfonic acid-functionalized SN (S-SN) exhibited 40% higher CO2 permeability, 20% higher CO2/N2 selectivity and almost the same CO2/CH4 selectivity as neat PIM-1 membranes. Moreover, after 150 days of aging, these membranes were capable of maintaining up to 68% of their initial CO2 permeability (compared to 37% for neat PIM-1). When prepared as TFN membranes, the incorporation of 0.05 wt% of S-SN led to 35% higher initial CO2 permeance and five times higher CO2 permeance after 28 days., S. Mohsenpour thanks the University of Manchester for funding his Ph.D. studies. P. Gorgojo acknowledges the Spanish Ministry of Economy and Competitiveness and the European Social Fund through the Ramon y Cajal programme (RYC2019-027060-I/AEI/10.13039/501100011033). Stuart M. Holmes thanks the EPSRC grant EP/009050., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin film nanocomposite membranes of PIM-1 and graphene oxide/ZIF-8 nanohybrids for organophilic pervaporation

  • Qiu, Boya
  • Alberto, Monica
  • Mohsenpour, Sajjad
  • Foster, Andrew B.
  • Ding, Shengzhe
  • Guo, Zunmin
  • Xu, Shaojun
  • Holmes, Stuart M.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
In this work, thin film nanocomposite (TFN) membranes of super-glassy polymer PIM-1 containing zeolitic imidazolate framework-8 (ZIF-8)/graphene oxide (GO) composites (ZG) have been prepared by dip-coating onto water pre-impregnated polyvinylidene fluoride (PVDF) substrates. Higher flux and improved separation factors as compared to bare PIM-1 thin film composite (TFC) membranes have been achieved in organophilic pervaporation; for an aqueous feed solution with 5 wt% of butanol at 65 °C, a total permeate flux of 7.9 ± 0.69 kg m−2h−1 and a separation factor (βBtOH/H2O) of 29.9 ± 1.99 have been obtained with a TFC membrane containing 0.5 wt% of ZG filler. The pervaporation separation index (PSI) of this membrane (228 kg m−2h−1) is amongst the highest values reported in the literature. This excellent performance is attributed to the formation of a defect-free PIM-1 active layer (<1 μm) and the hydrophobic nature of the ZG fillers., Patricia Gorgojo is grateful to the Spanish Ministerio de Economía y Competitividad and the European Social Fund for her Ramon y Cajal Fellowship (RYC2019-027060-I/AEI/10.13039/501100011033). Boya Qiu would like to acknowledge the China Scholarship Council (CSC, file no. 202006240076)and the University of Manchester for the joint PhD studentship to support her research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin film nanocomposite membranes of superglassy PIM-1 and amine-functionalised 2D fillers for gas separation

  • Almansour, Faiz
  • Alberto, Monica
  • Foster, Andrew B.
  • Mohsenpour, Sajjad
  • Budd, Peter M.
  • Gorgojo, Patricia
This article is part of the themed collection: Recent Open Access Articles., Loss of free volume over time (i.e. aging) is the main hurdle towards the commercial use of super glassy polymers for gas separation membranes. Aging takes place at a much faster rate in polymeric thin films, with permeability reductions of over 50% in only a few days. In this work 2D reduced holey graphene oxide (rHGO) nanosheets containing amine groups were added into thin films of the super-glassy polymer of intrinsic microporosity PIM-1. At filler loadings of 1 wt% of rHGO-tris(4-aminophenyl)amine, the CO2 permeance after 1 year of physical aging was 846 ± 37 GPU, which remained very close to that of the fresh membrane tested right after preparation (1050 ± 70 GPU), and was double that of 1 year-aged purely PIM-1 thin film composite membranes (432 ± 4 GPU). Membranes with lower filler concentrations of 0.1 wt% showed CO2 permeance values of 604 ± 34 GPU after 1 year of aging, but they aged quite rapidly; the initial CO2 permeance values of the fresh thin film nanocomposite (TFN) membrane at filler loading of 0.1 wt% was 3351 ± 662 GPU. The aging behaviour was also investigated in several tens of micrometres thick membranes (up to 2 years) for filler loadings of 0.1 wt% and the gas separation performance showed similar tendencies to that of thin films; leading to higher CO2 permeability without sacrificing CO2/CH4 selectivity., F. Almansour is grateful to the Department of Research & Development, Saudi Aramco for funding and supporting his PhD studies. M. Alberto is grateful to EPSRC for funding under the research grant number EP/S032258/1. A. B. Foster acknowledges the EPSRC for the grant number EP/v047078/1 “SynHiSel”. P. Gorgojo acknowledges the Spanish Ministry of Economy and Competitiveness and the European Social Fund through the Ramon y Cajal programme (RYC2019-027060-I/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solubility study and thermodynamic modelling of succinic acid and fumaric acid in bio-based solvents

  • López-Porfiri, Pablo
  • Gorgojo, Patricia
  • González-Miquel, María
The solubility and involved energies of organic acids in green solvents are relevant to the design of sustainable biorefinery downstream processes. In this work, the solubility of two important bio-based organic acids such as succinic acid and fumaric acid, in water and four bio-based solvents (i.e., ethyl acetate, 1,8-cineole, cyclopentyl methyl ether, and 2-methyl tetrahydrofuran) were measured within a temperature range of [283 – 313] K. A gravimetric methodology was adopted, previously validated using the organic acid aqueous solubilities available in the literature. The reported data present an average estimated uncertainty of measurement, with a level of confidence of 95%, of 5.2·10-4 mol·mol−1. Experimental results were correlated with the van’t Hoff equation, and the Buchowski–Ksiazaczak λh model, where the root mean squared deviations were <3.9·10-4 for all systems. From the experimental data and the COSMO-RS molecular simulation method, the solid–liquid equilibria were modelled to estimate the excess energies and the solute activity coefficients of the saturated solutions. Excess enthalpy contribution analysis shows that attractive hydrogen-bonding interactions between the organic acids and the green solvents drive the dissolution phenomena. The magnitude of the hydrogen-bonding interactions increases with temperature for all systems, agreeing with the observed solubility trends. The organic acid energies of solution were estimated from the van’t Hoff equation, demonstrating an enthalpy–entropy compensation effect. The energetic analysis shows that the dissolution phenomenon is an enthalpy-driven process for fumaric acid, whereas no predominant effect is observed for succinic acid., This work was funded by the CONICYT PFCHA/DOCTORADO BECAS CHILE/2017 – 72180306. P. Gorgojo acknowledges her Ramón y Cajal fellowship RYC2019-027060-I funded by MICIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. M. González-Miquel also acknowledges Comunidad Autónoma de Madrid (Spain) for funding through “Programa de Excelencia para el Profesorado Universitario”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-dimensional materials for gas separation membranes

  • Luque-Alled, José Miguel
  • Moreno, César
  • Gorgojo, Patricia
The next generation of gas separation membranes requires from novel membrane materials with superior performance, sufficient mechanical stability, and long-term stability under harsh operation conditions. Two-dimensional (2D) materials offer several advantages over conventionally used polymeric materials. However, gas separation membranes containing 2D materials have not reached commercialization yet, despite having been discovered almost two decades ago. Difficulties in membrane scalability and high costs associated with the manufacturing processes are the main challenges. This review focuses on the current state and prospects of the technology and highlights novel 2D materials and strategies to fabricate ultrathin membranes that have been developed during the last three years. A multidisciplinary approach, covering the fields of physics, chemistry, and chemical engineering, needs to be taken to achieve the preparation of robust, large-scale, and economically affordable (2D material)-based membranes capable of breaking into the gas separation market., J.M. Luque-Alled acknowledges the Spanish Ministerio de Economía y Competitividad and the European Social Fund for funding through the Margarita Salas programme. C. Moreno and P. Gorgojo are supported by Grant RYC2019-028110-I and RYC2019-027060-I funded by the Spanish Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación MICIN/AEI/10.13039/501100011033 and by the European Social Fund “ESF Investing in your future”. This research was supported by the Spanish Ministerio de Ciencia e Innovación- Agencia Estatal de Investigación —, under Contract no. PID2019-107338RB-C65 and by the FLAG-ERA grant LEGOCHIP, under Grant agreement no. PCI2019-111890-2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO2 separation using thin film composite membranes of acid-hydrolyzed PIM-1

  • Yu, Ming
  • Foster, Andrew B.
  • Alshurafa, Mustafa
  • Luque-Alled, José Miguel
  • Gorgojo, Patricia
  • Kentish, Sandra E.
  • Scholes, Colin A.
  • Budd, Peter M.
The polymer of intrinsic microporosity PIM-1 was synthesized with different topologies and negligible network content. A more rapid heating rate from room temperature yielded a predominantly di-substituted PIM-1 (D-PIM-1), whereas a marginally lower heating rate produced a more branched structure (B-PIM-1). Both polymers were acid-hydrolyzed to give carboxylic acid functionalization (cPIM-1), as indicated by FT-IR, 1H NMR, and elemental analysis. Both PIM-1 and cPIM-1 were processed into self-supported membranes and into thin film composite (TFC) membranes on a polyacrylonitrile support. For a 70% hydrolyzed polymer (D-cPIM-1-70%), the initial CO2 permeance reached 7700 GPU, with ideal selectivity of 56 for CO2/N2 and 37 for CO2/CH4. D-PIM-1 and D-cPIM-1-70% showed 85% and 52% CO2 permeance drop after 60 days’ aging, respectively. B-PIM-1, with initial CO2 permeance of 3100 GPU and ideal selectivity of 19 for CO2/N2 and 11 for CO2/CH4, showed only a 65% decrease. Polymer that was both branched and hydrolyzed (B-cPIM-1-73&81%), with CO2 permeance of 3200 GPU and selectivity of 64 for CO2/N2 and 45 for CO2/CH4, showed no decrease of CO2 permeance after 60 days. The branched structure is crucial for reducing membrane aging. Plasticization gave rise to reduced selectivity in mixed gas experiments, but nevertheless TFC membranes prepared from B-cPIM-1-81% were able to concentrate CO2 to 38% from a 10% CO2/90% N2 mixture at 4.8 bar., Ming Yu is grateful to the University of Melbourne for a Melbourne Research scholarship for a dual award PhD programme between the University of Melbourne and the University of Manchester. Andrew B. Foster and Peter M. Budd acknowledge the support of EPSRC Programme Grant ep/v047078/1 “SynHiSel”. Mustafa Alshurafa acknowledges the Department of Research & Development, Saudi Aramco, for PhD sponsorship. Patricia Gorgojo is supported by Grant RYC2019-027060-I funded by MICIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. Jose Miguel Luque-Alled acknowledges the Spanish Ministerio de Economía y Competitividad and the European Social Fund for his Margarita Salas Fellowship. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PVDF membranes containing alkyl and perfluoroalkyl-functionalized graphene nanosheets for improved membrane distillation

  • Luque-Alled, José Miguel
  • Leaper, Sebastian
  • Abdel-Karim, Ahmed
  • Skuse, Clara
  • Gorgojo, Patricia
Polyvinylidene fluoride (PVDF) membranes containing hydrophobic graphene nanofillers were prepared and tested for membrane distillation applications. The nanofillers were obtained by a two-step process: 1st) chemical grafting of hydrophobic molecules, either octylamine (OA) or perfluoroctylamine (PFOA), to graphene oxide (GO) nanosheets, and 2nd) chemical reduction of functionalized GO (rGO) to remove unreacted oxygen-containing functional groups. This resulted in OA-functionalized reduced GO (OA-rGO) and PFOA-functionalized rGO (PFOA-rGO). The addition of these nanomaterials to PVDF membranes prepared by the phase inversion process led to an increase in the membrane contact angle, and therefore higher hydrophobicity, as well as an increase in the membrane porosity. When comparing both nanofillers, OA-rGO and PFOA-rGO, the latter was more efficient in achieving higher contact angles due to the presence of fluorine atoms, whereas OA-rGO led to a greater enhancement in membrane porosity as compared to PFOA-rGO. MMMs containing 0.7 wt% nanofiller loadings of OA-rGO and PFOA-rGO achieved the highest water fluxes of 9.1 and 8.8 L m−2 h−1, respectively and salt rejection above 99.9%, which was monitored for at least 162 h of operation for the former. In comparison with pure PVDF (flux of 5 L m−2 h−1), the addition of OA-rGO and PFOA-rGO nanofillers results in a flux increment of 82% and 76%, respectively., The authors acknowledge the Engineering and Physical Sciences Research Council (EPSRC) grant EP/S032258/1 for supporting this work. Patricia Gorgojo is supported by Grant RYC2019-027060-I funded by MICIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. Jose Miguel Luque-Alled acknowledges the Spanish Ministerio de Economía y Competitividad and the European Social Fund for his Margarita Salas Fellowship, and the Department of Chemical Engineering of the University of Manchester for funding his PhD studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic solvent-free fabrication of thin film polyamide/zeolitic imidazolate framework membranes for removal of dyes from water

  • Luque-Alled, José Miguel
  • Martínez-Izquierdo, Lidia
  • Gorgojo, Patricia
  • Téllez, Carlos
  • Coronas, Joaquín
Thin film composite (TFC) polyamide (PA) membranes in combination with zeolitic imidazolate frameworks (ZIF), such as ZIF-8 and ZIF-93, have been fabricated using a novel approach based on vapor phase interfacial polymerization (VIP). These membranes have been investigated for nanofiltration (NF) of aqueous solutions of organic dyes, such as Rose Bengal (RB, 1017 Da), Sunset Yellow (SY, 452 Da) and Acridine Orange (AO, 265 Da). The preparation of the PA layer by VIP technique avoids the use of any organic solvent that is typically required in the conventional PA synthesis. Both ZIF-8 and ZIF-93 were initially synthesized using conventional procedures (methanol-based route) and incorporated to the PA layer in two different configurations: i) thin film nanocomposite with ZIF embedded within the PA film, and ii) bilayer membranes with a layer of ZIF between the support and the PA layer. The synthesis of ZIF-93 using a water-based route was developed for the bilayer configuration allowing for an organic solvent-free fabrication of PA/ZIF-93 bilayer VIP-TFC. These membranes showed the highest water permeances of 2.6, 3.4 and 2.2 L m-2h−1 bar−1 for RB, SY and AO, respectively. As compared to the control membrane VIP-TFC, this represents permeance increases of 69–117% and maintains high (greater than 99%) rejection of all the organic dyes. Membrane characterization demonstrated that the permeance enhancement for bilayer PA/ZIF-93 VIP-TFCs is related to an improved hydrophilicity, higher surface roughness and thinner selective layers. The prepared membranes demonstrated excellent cycle stability, maintaining their initial water permeance and dye rejection throughout 34 h of long-term operation, and being able to operate across the entire pH range studied (pH 3 to 9) without any detrimental effects on performance., This work was supported by Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 («Agencia Estatal de Investigación» (AEI) and «Ministerio de Ciencia e Innovación» (MCIN), Spain); Margarita Salas and Juan de la Cierva programmes funded by Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund; Grant RYC2019-027060-I funded by MICIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”; and financial support from the Aragón Government (Grant T68-23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative life cycle assessment of seawater desalination technologies enhanced by graphene membranes

  • Skuse, Clara
  • Zepon Tarpani, Raphael Ricardo
  • Gorgojo, Patricia
  • Gallego-Schmid, Alejandro
  • Azapagic, Adisa
Graphene oxide (GO)-enhanced membranes are being developed to solve major limitations in both reverse osmosis (RO) and membrane distillation (MD) technologies, which include high electricity and thermal energy consumption. This study performed, for the first time, a life cycle assessment to determine the effects of using GO-enhanced membranes on the environmental impacts of seawater desalination via RO and MD. Four scenarios were evaluated and eighteen environmental impacts were quantified according to the ReCiPe impact assessment method. The average impacts for the RO-GO scenarios were lower than those of RO by 3–7 %. The reduction in the climate change impact was 3–8 %, which could avoid the release of 380–850 kt CO2 eq. per year globally if these membranes were used in current seawater RO systems. The MD-GO scenarios had, on average, 27–34 % lower impacts than the MD scenarios. Overall, the RO-GO systems were the most favourable, with lower impacts than MD-GO for most categories. However, using solar-thermal energy instead of natural gas in MD desalination would lead to 43–93 % lower impacts in nine categories than RO powered predominantly by fossil fuels. This includes climate change, which would be 64 % lower; however, freshwater ecotoxicity would be more than four-times higher. The results of this work indicate the potential environmental benefits of GO-enhanced membranes and discuss the future developments needed to improve the performance of RO and MD., The authors are grateful to the EPSRC for funding under the grant number EP/S032258/1. The lead author would like to acknowledge the EPSRC for funding this work through the NOWNANO CDT. One of the authors (PG) acknowledges Grant RYC2019-027060-I funded by MICIN/AEI/10.13039/501100011033 and by “ESF Investing in your future"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Outstanding performance of PIM-1 membranes towards the separation of fluorinated refrigerant gases

  • Gutiérrez-Hernández, Sergio V.
  • Pardo, Fernando
  • Foster, Andrew B.
  • Gorgojo, Patricia
  • Budd, Peter M.
  • Zarca, Gabriel
  • Urtiaga, Ane
The recycling of depleted high global warming mixtures of fluorinated gases (F-gases) with close-boiling or azeotropic behavior requires advanced separation processes to obtain effectively the pure components. Herein, several types of PIM-1 membranes were tested for the first time towards the separation of hydrofluorocarbons and hydrofluoroolefins, showing extraordinarily high permeability coefficients for the value-added difluoromethane (R-32), up to 4100 barrer, coupled with high selectivity for the F-gas pairs of interest. Additionally, the solubility of selected F-gases in PIM-1 was measured and fitted to the dual-mode and Guggenheim, Anderson and de Boer sorption models. The separation performance of the standard PIM-1 and a highly branched PIM-1 was examined with the mixture R-410A (containing R-32 and pentafluoroethane R-125) to assess the influence of the membrane topology on the mixed-gas permeation properties over time (physical aging). Considering that the branched PIM-1 membrane was the least impacted by the aging phenomena, it was used to recover high purity R-32 (concentration in the permeate side as high as 98.9 vol % was achieved) from refrigerant gas mixtures R-410A and R–454B (mixture of R-32 and R-1234yf) in continuous long-term experiments. Results showed the great potential of PIM-1 membranes for the separation of R-32 from refrigerant mixtures collected from end-of-life equipment., This research is supported by project PID2019-105827RB-I00 funded by MCIN/AEI/10.13039/501100011033. F.P. and S.V.G.H. acknowledge the support of the Spanish State Research Agency and the Spanish Ministry of Science and Innovation (grants IJC2020-043134-I and PRE2020-093568, respectively). A.B.F and P.M.B acknowledge EPSRC Grant ep/v047078/1 (SynHiSel). P.G. is supported by Grant RYC2019-027060-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High gas permeability in aged superglassy membranes with nanosized UiO-66−NH2/cPIM-1 network fillers

  • Boya, Qiu
  • Ming, Yu
  • Luque-Alled, José Miguel
  • Ding, Shengzhe
  • Foster, Andrew B.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
Superglassy membranes synthesised by polymers of intrinsic microporosity (PIMs) suffer from physical aging and show poor gas permeance over time, especially thin membranes, due to the fast rearrangement of nonequilibrium polymer chains. Herein, we constructed a novel PIM-1 thin film nanocomposite membrane (TFN) using nanosized UiO-66−NH2 (≈10 nm)/carboxylated PIM-1 (cPIM-1) as the composite filler. Unlike conventional fillers, which interact with the polymer only via the surface, the UiO-66−NH2/cPIM-1 forms a stable three-dimensional (3D) network intertwining with the polymer chains, being very effective to impede chain relaxation, and thus physical aging. Nanosizing of UiO-66−NH2 was achieved by regulating the nucleation kinetics using carbon quantum dots (CQD) during the synthesis. This led to increased surface area, and hence more functional groups to bond with cPIM-1 (via hydrogen bonding between −NH2 and −COOH groups), which also improved interfacial compatibility between the 3D network and polymer chains avoiding defect formation. As a result, the novel TFN showed significantly improved performance in gas separation along with reduced aging (i.e. ≈6 % loss in CO2 permeability over 63 days); the aged membranes had a CO2 permeance of 2504 GPU and ideal selectivity values of 37.2 and 23.8 for CO2/N2 and CO2/CH4, respectively., Patricia Gorgojo is grateful to the Spanish Ministerio de Economía y Competitividad and the European Social Fund for her Ramon y Cajal Fellowship (RYC2019-027060-I/AEI/10.13039/501100011033). Boya Qiu thanks to the China Scholarship Council (CSC, file no. 202006240076)-University of Manchester joint studentship for supporting the PhD research. Andrew B. Foster is grateful to EPSRC Programme Grant ep/v047078/1 “SynHiSel”. Ming Yu is grateful to the University of Melbourne for a Melbourne Research scholarship for a dual award PhD programme between the University of Melbourne and the University of Manchester. J. M. Luque-Alled acknowledges Grant FJC2021-047822-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This project is partially supported by Ningbo Natural Science Foundation (Project ID 2023J245)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High gas permeance in CO2-selective thin film composite membranes from bis(phenyl)fluorene-containing blends with PIM-1

  • Almansour, Faiz
  • Foster, Andrew B.
  • Ameen, Ahmed W.
  • Mohsenpour, Sajjad
  • Budd, Peter M.
  • Gorgojo, Patricia
A novel approach to improve the initial performance as well as to prevent physical aging of superglassy high free volume polymer PIM-1 is reported. Bis(phenyl)fluorene-based polymer of intrinsic microporosity (Cardo-PIM-1) was used at different loadings in PIM-1 to fabricate thin film composite (TFC) membranes and freestanding membranes. The gas performances of both TFCs and thick freestanding membranes exhibited similar trends; higher CO2 permeance and higher CO2/CH4 selectivity at relatively low loadings (≤5 wt %). TFCs containing 5 wt % Cardo-PIM-1 achieved a CO2 permeance of (12600 ± 866 GPU), which corresponds to about a threefold increase as compared to the pristine TFC-PIM-1 membranes (2850 ± 254 GPU) and higher CO2/CH4 selectivity (14.6 ± 1.3) as compared to pure PIM-1 (10 ± 3). With regards to physical aging, PIM-1 TFC membranes experienced a 96 % reduction in CO2 permeance after 1 year. However, for the TFCs containing 5 wt % cardo the reduction was considerably lower (59%) and all took place at an initial stage of up to 37 days, remaining at a good and stable CO2 permeance of c.a. 5000 GPU for the remaining testing period of up to one year., Faiz Almansour is grateful to the Department of Research & Development Centre, Saudi Aramco for funding and supporting his PhD studies. Patricia Gorgojo is grateful to her fellowship with reference RYC2019-027060-I funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Andrew B. Foster is grateful to EPSRC Programme Grant ep/v047078/1 “SynHiSel”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spray coating of 2D materials in the production of antifouling membranes for membrane distillation

  • Skuse, Clara
  • Alberto, Monica
  • Luque-Alled, José Miguel
  • Orts Mercadillo, Vicente
  • Asuquo, Edidiong
  • Gallego-Schmid, Alejandro
  • Azapagic, Adisa
  • Gorgojo, Patricia
Membrane surface coatings with 2D materials have been shown to exhibit antifouling properties for water-treatment applications; however, synthesis methods currently based on vacuum filtration are not easily scalable. This study describes a scalable method for coating membranes with a range of 2D materials including graphene oxide (GO), hexagonal boron nitride (hBN), molybdenum disulphide (MoS2) and tungsten disulphide (WS2). Isopropyl alcohol solutions containing each class of the 2D flakes were spray-coated onto commercial polyvinylidene fluoride (PVDF) using a pyrolyser. The nanomaterials were secured with polydopamine (PDA) as a crosslinker in a method that could easily be integrated into a scalable roll-to-roll process. Changes in morphology, surface roughness, hydrophobicity, mechanical durability and chemical composition were evaluated using scanning electron microscopy, atomic force microscopy, contact angle, tensile strength measurements and Fourier-transform infrared spectroscopy. The 2D nanomaterials-coated membranes were tested in membrane distillation (MD) experiments over 72 h and compared to pristine PVDF and PDA/PVDF membranes. Salt rejection and MD performance stability were evaluated using feedwaters with high concentrations of humic acid (150 ppm) and paraffin oil (200 ppm) simulating simple organic wastewater from oil and gas extraction. The flux decline ratio was measured in terms of percentage permeate loss per hour (%/h), to allow for future comparisons with studies with different experimental times. The pristine PVDF membrane failed after 10 h by pore-wetting due to fouling while the PDA/PVDF membrane had the largest flux decline ratio (0.3 %/h). The membranes coated with GO and hBN had flux decline ratios orders of magnitude lower (0.0021 ± 0.005 and 0.028 ± 0.01 %/h, respectively). All membranes had a high salt rejection (>99.9 %). The GO-coated membrane was the only membrane type that was able to treat both surfactant-containing and foulant-containing feedwaters. The improved performance is attributed to the decrease in both surface roughness and hydrophobicity, which reduces the adsorption of foulants onto the membrane surface. This work shows a facile, scalable method to overcome fouling limitations in MD., The authors are grateful to the EPSRC for funding under grant number EP/S032258/1. Clara Skuse would like to acknowledge the EPSRC for funding this work through the NOWNANO CDT. Patricia Gorgojo is grateful for her Fellowship with reference RYC2019-027060-I funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

GO as gutter layer in superglassy thin film composite membranes for enhanced gas separation

  • Qiu, Boya
  • Yu, Ming
  • Alshurafa, Mustafa
  • López-Porfiri, Pablo
  • Pérez-Page, María
  • Foster, Andrew B.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
Polymers with intrinsic microporosity (PIM) have gathered considerable attention over the last two decades for fabricating high-performance membranes for CO2 separation, owing to their highly permeable and porous structures. Particularly, thin film composite (TFC) membranes with thin active layers (<5 μm) deposited onto more porous substrates are suitable for practical applications as they offer a combination of high permeance and mechanical strength. However, penetration of the active layer into the pores of the substrate leads to additional mass transfer resistance and creates defects and voids, thereby reducing the membrane's permeance and selectivity. Herein, we introduced graphene oxide (GO) as a gutter layer in TFCs made with PIM-1. GO flakes were deposited to cover the substrates partially, thereby reducing polymer penetration while maintaining good structural integrity of the TFCs. We successfully fabricated a series of PIM-1 TFCs by kiss coating, with the thinnest active layer at ∼179 nm. These TFCs exhibited an ideal selectivity for CO2/N2 of 44.4, and the CO2 permeance was increased by up to 104 % under optimised conditions. The strategy is generic as well which was validated using carboxylated PIM-1 (cPIM-1)., P.G. is grateful to the Spanish Ministerio de Economía y Competitividad and the European Social Fund for her Ramon y Cajal Fellowship (RYC2019-027060-I/AEI/10.13039/501100011033). B.Q. thanks to the China Scholarship Council (CSC, file no. 202006240076)-University of Manchester joint studentship for supporting the PhD research. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 872102. A.B.F. is supported by EPSRC Programme Grant “SynHiSel” (EP/V047078/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scaled-up graphene oxide membranes: Improved membrane distillation performance and antifouling properties

  • Skuse, Clara
  • Aparicio, Fernando
  • Andrés-Mañas, Juan Antonio
  • Zaragoza, Guillermo
  • Gallego-Schmid, Alejandro
  • Azapagic, Adisa
  • Lewthwaite, Katie
  • Gorgojo, Patricia
Membrane distillation (MD) is a promising desalination technology whose commercial implementation remains limited by high thermal energy consumption and membrane fouling. In this work, thermally efficient graphene oxide (GO)-functionalised membranes were fabricated and evaluated at pilot scale for the first time. Polyvinylidene fluoride (PVDF) membranes coated with polydopamine (PDA) and spray-coated with GO were tested in air-gap and vacuum-assisted air-gap MD (AGMD and V-AGMD) systems producing up to 1.5 L h⁻¹ of potable water. Membrane performance was evaluated in terms of permeate flux, salt rejection, antifouling behaviour and thermal efficiency using synthetic seawater, brine, foulant-containing feedwater and real seawater., The GO-PDA/PVDF membranes resisted fouling-induced pore wetting for over 72 h, compared with 20 h for pristine PVDF membranes. The GO coating reduced the fouling rate from 0.24%/h for the PDA/PVDF control membrane to 0.07%/h and enabled complete flux recovery (FRR = 100%) following a 30-minute rinse with deionised water at 75 °C, indicating fully reversible fouling. By comparison, the PDA/PVDF membrane exhibited an FRR of 87%. Experiments using real seawater also demonstrated stable operation and a 25% higher permeate flux relative to the control membrane., The GO-functionalised membranes also exhibited enhanced thermal performance, with up to 40% higher thermal efficiency and reductions in STEC of 16.7% and 9.8% for AGMD and V-AGMD, respectively. These findings demonstrate the potential of scalable GO coatings to improve the operational and energetic performance of MD desalination systems., The authors are grateful to the EPSRC for funding under grant number EP/S032258/1. Clara Skuse would like to acknowledge the EPSRC for funding this work through the NOWNANO CDT, and the EU Horizon 2020 research and innovation programme “Solar Facilities for the European Research Area - Third Phase’ — ‘SFERA-III” project for access to EU research installations (Grant Agreement n. 823802). Patricia Gorgojo acknowledges her Ramón y Cajal fellowship RYC2019–027060-I funded by MICIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Immobilized graphene oxide-based membranes for improved pore wetting resistance in membrane distillation

  • Alberto, M.
  • Skuse, C.
  • Tamaddondar, M.
  • Gorgojo, P.
Membrane distillation (MD) is a useful method for the purification of difficult feedwaters but it cannot be applied in a range of industries due to pore wetting. In this work, graphene oxide (GO) laminate coatings are explored to overcome the pore wetting issues. Air gap MD (AGMD) configuration was considered, using a 35 g L-1 NaCl solution with 150 mg L-1 (150 ppm) of Triton X-100 surfactant as feed material. The GO is deposited as a laminate membrane on top of a commercial porous polyvinylidene fluoride (PVDF) support and good adhesion is achieved through the use of polydopamine (PDA) to form a hydrophilic tri-layer membrane. The small pore size achieved with the laminate GO led to increased pore wetting resistance for at least 90 h compared to 20 min with pristine commercial PVDF. Additionally, the extra layers of GO and PDA did not affect the membrane flux. Overall, a tri-layer immobilized GO membrane is synthesized with superior performance when compared to current commercial membranes, meaning that MD can be used for a new range of wastewater applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Green supported liquid membranes: The permeability activity-based linear operation (PABLO) method

  • López-Porfiri, P.
  • González-Miquel, M.
  • Gorgojo Alonso, P.
Supported liquid membranes (SLMs) containing novel green solvents are proposed as a sustainable alternative separation process in the recovery of biomolecules. In this work, succinic acid has been successfully extracted from model fermentation broths through a stripping phase-facilitated transport mechanism with four different green supported liquid membranes: two eutectic solvents (DL-menthol:OctA and N4444Cl:OctA), the bio-based solvent eucalyptol and the ionic liquid C4pyrr]Tf2N]. A permeability activity-based model that takes into account for the first time solute-phase affinities has been developed using the quantum chemical COSMO-RS method; the model corrects the mass transfer driving force and allows extraction predictions beyond the concentration equilibrium. The best recovery has been achieved experimentally for the eucalyptol-based SLM (concentration factor of 1.4) using an alkaline aqueous solution (0.5 M NaOH) as the stripping phase. A countercurrent cascade extraction process design is proposed, and a graphical method to determine the stage number, interstage concentrations as well as mass transfer area requirements is presented. This new tool, the Permeability Activity-Based Linear Operation (PABLO) method, will substantially enhance the process design of SLMs technology for the biorefinery industry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thin film nanocomposite membranes of PIM-1 and graphene oxide/ZIF-8 nanohybrids for organophilic pervaporation

  • Qiu, B.
  • Alberto, M.
  • Mohsenpour, S.
  • Foster, A. B.
  • Ding, S.
  • Guo, Z.
  • Xu, S.
  • Holmes, S. M.
  • Budd, P. M.
  • Fan, X.
  • Gorgojo Alonso, P.
In this work, thin film nanocomposite (TFN) membranes of super-glassy polymer PIM-1 containing zeolitic imidazolate framework-8 (ZIF-8)/graphene oxide (GO) composites (ZG) have been prepared by dip-coating onto water pre-impregnated polyvinylidene fluoride (PVDF) substrates. Higher flux and improved separation factors as compared to bare PIM-1 thin film composite (TFC) membranes have been achieved in organophilic pervaporation; for an aqueous feed solution with 5 wt% of butanol at 65 °C, a total permeate flux of 7.9 ± 0.69 kg m-2h-1 and a separation factor (ßBtOH/H2O) of 29.9 ± 1.99 have been obtained with a TFC membrane containing 0.5 wt% of ZG filler. The pervaporation separation index (PSI) of this membrane (228 kg m-2h-1) is amongst the highest values reported in the literature. This excellent performance is attributed to the formation of a defect-free PIM-1 active layer (<1 µm) and the hydrophobic nature of the ZG fillers. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

PIM-1 membranes containing POSS - graphene oxide for CO2 separation

  • Mohsenpour, S.
  • Ameen, A. W.
  • Leaper, S.
  • Skuse, C.
  • Almansour, F.
  • Budd, P. M.
  • Gorgojo Alonso, P.
PIM-1 mixed matrix membranes (MMMs) were fabricated with polyhedral oligomeric silsesquioxane (POSS) and graphene oxide (GO) functionalized with POSS (GO-POSS), and tested for CO2/N2 (single gas) and CO2/CH4 (1:1, v:v gas mixture). The CO2 permeability of the best performing fresh MMM (containing 0.05 wt% GO-POSS) was ~ 12000 Barrer, which is 69% higher than that of the neat PIM-1 membrane, with about the same selectivity (CO2/CH4 selectivity ~ 12 and CO2/N2 selectivity ~ 20). In both cases, the gas separation data surpass the 2008 Robeson upper bound. In addition to the initial CO2 permeability enhancement, the use of GO-POSS is an efficient strategy to slow down physical aging. The MMM at a filler loading of 0.75 wt% showed less than half of the reduction in CO2 permeability than the neat PIM-1 membrane 160 days after preparation (26% for the MMM vs 58% for the purely polymeric one). © 2022 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Porous silica nanosheets in PIM-1 membranes for CO2 separation

  • Mohsenpour, Sajjad
  • Guo, Zunmin
  • Almansour, Faiz
  • Holmes, Stuart M.
  • Budd, Peter M.
  • Gorgojo, Patricia
PIM-1-based freestanding mixed matrix membranes (MMMs) and thin film nanocomposites (TFNs) were prepared by incorporating porous silica nanosheets (SN) and exfoliated SN (E-SN) derived from natural vermiculite (Verm) in the PIM-1 polymer matrix. In addition, SN were functionalized by sulfonic acid and amine groups (S-SN and N-SN, respectively) and were also used as fillers for the preparation of MMMs. The gas separation performance was evaluated using CO2/CH4 and CO2/N2 (1:1, v:v) binary gas mixtures. Among freestanding membranes, fresh ones (i.e. tested right after preparation) containing 0.05 wt% functionalized SN and E-SN outperformed the neat PIM-1, surpassing the 2008 Robeson upper bound. At the same filler concentration, fresh MMMs with sulfonic acid-functionalized SN (S-SN) exhibited 40% higher CO2 permeability, 20% higher CO2/N2 selectivity and almost the same CO2/CH4 selectivity as neat PIM-1 membranes. Moreover, after 150 days of aging, these membranes were capable of maintaining up to 68% of their initial CO2 permeability (compared to 37% for neat PIM-1). When prepared as TFN membranes, the incorporation of 0.05 wt% of S-SN led to 35% higher initial CO2 permeance and five times higher CO2 permeance after 28 days.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thin film nanocomposite membranes of superglassy PIM-1 and amine-functionalised 2D fillers for gas separation

  • Almansour, Faiz
  • Alberto, Monica
  • Foster, Andrew B.
  • Mohsenpour, Sajjad
  • Budd, Peter M.
  • Gorgojo, Patricia
Loss of free volume over time (i.e. aging) is the main hurdle towards the commercial use of super glassy polymers for gas separation membranes. Aging takes place at a much faster rate in polymeric thin films, with permeability reductions of over 50% in only a few days. In this work 2D reduced holey graphene oxide (rHGO) nanosheets containing amine groups were added into thin films of the super-glassy polymer of intrinsic microporosity PIM-1. At filler loadings of 1 wt% of rHGO-tris(4-aminophenyl)amine, the CO2 permeance after 1 year of physical aging was 846 ± 37 GPU, which remained very close to that of the fresh membrane tested right after preparation (1050 ± 70 GPU), and was double that of 1 year-aged purely PIM-1 thin film composite membranes (432 ± 4 GPU). Membranes with lower filler concentrations of 0.1 wt% showed CO2 permeance values of 604 ± 34 GPU after 1 year of aging, but they aged quite rapidly; the initial CO2 permeance values of the fresh thin film nanocomposite (TFN) membrane at filler loading of 0.1 wt% was 3351 ± 662 GPU. The aging behaviour was also investigated in several tens of micrometres thick membranes (up to 2 years) for filler loadings of 0.1 wt% and the gas separation performance showed similar tendencies to that of thin films; leading to higher CO2 permeability without sacrificing CO2/CH4 selectivity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Two-dimensional materials for gas separation membranes

  • Luque-Alled, José M.
  • Moreno, César
  • Gorgojo, Patricia
The next generation of gas separation membranes requires from novel membrane materials with superior performance, sufficient mechanical stability, and long-term stability under harsh operation conditions. Two-dimensional (2D) materials offer several advantages over conventionally used polymeric materials. However, gas separation membranes containing 2D materials have not reached commercialization yet, despite having been discovered almost two decades ago. Difficulties in membrane scalability and high costs associated with the manufacturing processes are the main challenges. This review focuses on the current state and prospects of the technology and highlights novel 2D materials and strategies to fabricate ultrathin membranes that have been developed during the last three years. A multidisciplinary approach, covering the fields of physics, chemistry, and chemical engineering, needs to be taken to achieve the preparation of robust, large-scale, and economically affordable (2D material)-based membranes capable of breaking into the gas separation market.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative life cycle assessment of seawater desalination technologies enhanced by graphene membranes

  • Skuse, Clara
  • Tarpani, Raphael Ricardo Zepon
  • Gorgojo, Patricia
  • Gallego-Schmid, Alejandro
  • Azapagic, Adisa
Graphene oxide (GO)-enhanced membranes are being developed to solve major limitations in both reverse osmosis (RO) and membrane distillation (MD) technologies, which include high electricity and thermal energy consumption. This study performed, for the first time, a life cycle assessment to determine the effects of using GO-enhanced membranes on the environmental impacts of seawater desalination via RO and MD. Four scenarios were evaluated and eighteen environmental impacts were quantified according to the ReCiPe impact assessment method. The average impacts for the RO-GO scenarios were lower than those of RO by 3–7 %. The reduction in the climate change impact was 3–8 %, which could avoid the release of 380–850 kt CO2 eq. per year globally if these membranes were used in current seawater RO systems. The MD-GO scenarios had, on average, 27–34 % lower impacts than the MD scenarios. Overall, the RO-GO systems were the most favourable, with lower impacts than MD-GO for most categories. However, using solar-thermal energy instead of natural gas in MD desalination would lead to 43–93 % lower impacts in nine categories than RO powered predominantly by fossil fuels. This includes climate change, which would be 64 % lower; however, freshwater ecotoxicity would be more than four-times higher. The results of this work indicate the potential environmental benefits of GO-enhanced membranes and discuss the future developments needed to improve the performance of RO and MD.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Outstanding performance of PIM-1 membranes towards the separation of fluorinated refrigerant gases

  • Gutiérrez-Hernández, Sergio V.
  • Pardo, Fernando
  • Foster, Andrew B.
  • Gorgojo, Patricia
  • Budd, Peter M.
  • Zarca, Gabriel
  • Urtiaga, Ane
The recycling of depleted high global warming mixtures of fluorinated gases (F-gases) with close-boiling or azeotropic behavior requires advanced separation processes to obtain effectively the pure components. Herein, several types of PIM-1 membranes were tested for the first time towards the separation of hydrofluorocarbons and hydrofluoroolefins, showing extraordinarily high permeability coefficients for the value-added difluoromethane (R-32), up to 4100 barrer, coupled with high selectivity for the F-gas pairs of interest. Additionally, the solubility of selected F-gases in PIM-1 was measured and fitted to the dual-mode and Guggenheim, Anderson and de Boer sorption models. The separation performance of the standard PIM-1 and a highly branched PIM-1 was examined with the mixture R-410A (containing R-32 and pentafluoroethane R-125) to assess the influence of the membrane topology on the mixed-gas permeation properties over time (physical aging). Considering that the branched PIM-1 membrane was the least impacted by the aging phenomena, it was used to recover high purity R-32 (concentration in the permeate side as high as 98.9 vol % was achieved) from refrigerant gas mixtures R-410A and R–454B (mixture of R-32 and R-1234yf) in continuous long-term experiments. Results showed the great potential of PIM-1 membranes for the separation of R-32 from refrigerant mixtures collected from end-of-life equipment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Towards the technological maturity of membrane distillation: the MD module performance curve

  • López-Porfiri, P.
  • Ramos-Paredes, S.
  • Núñez, P.
  • Gorgojo, P.
Membrane distillation (MD) is constantly acknowledged in the research literature as a promising technology for the future of desalination, with an increasing number of studies reported year after year. However, real MD applications still lag behind with only a few pilot-plant tests worldwide. The lack of technology transfer from academia to industry is caused by important gaps between its fundamental basis and the process design. Herein, we explore critical disconnections by conducting coupled mass and heat transfer modeling and MD simulations; we use well-known MD mass and heat transfer equations to model and simulate flux over a typical MD membrane for different geometries, areas, and operational conditions in direct contact configuration. From the analysis of the results, we propose research guidelines and process development strategies, and construct an MD module performance curve. From this graph, permeate flow rate, thermal energy consumption and outlet temperatures can be determined for given feed inlet conditions (temperature and concentration). Comprehensive tools such as this MD module curve and good communication between membrane developers and process engineers are required to accelerate the process of bringing the MD technology from a still-emerging status to a maturity level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

PVDF membranes containing alkyl and perfluoroalkyl-functionalized graphene nanosheets for improved membrane distillation

  • Luque-Alled, J. M.
  • Leaper, S.
  • Abdel-Karim, A.
  • Skuse, C.
  • Gorgojo, P.
Polyvinylidene fluoride (PVDF) membranes containing hydrophobic graphene nanofillers were prepared and tested for membrane distillation applications. The nanofillers were obtained by a two-step process: 1st) chemical grafting of hydrophobic molecules, either octylamine (OA) or perfluoroctylamine (PFOA), to graphene oxide (GO) nanosheets, and 2nd) chemical reduction of functionalized GO (rGO) to remove unreacted oxygen-containing functional groups. This resulted in OA-functionalized reduced GO (OA-rGO) and PFOA-functionalized rGO (PFOA-rGO). The addition of these nanomaterials to PVDF membranes prepared by the phase inversion process led to an increase in the membrane contact angle, and therefore higher hydrophobicity, as well as an increase in the membrane porosity. When comparing both nanofillers, OA-rGO and PFOA-rGO, the latter was more efficient in achieving higher contact angles due to the presence of fluorine atoms, whereas OA-rGO led to a greater enhancement in membrane porosity as compared to PFOA-rGO. MMMs containing 0.7 wt% nanofiller loadings of OA-rGO and PFOA-rGO achieved the highest water fluxes of 9.1 and 8.8 L m−2 h−1, respectively and salt rejection above 99.9%, which was monitored for at least 162 h of operation for the former. In comparison with pure PVDF (flux of 5 L m−2 h−1), the addition of OA-rGO and PFOA-rGO nanofillers results in a flux increment of 82% and 76%, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

CO2 separation using thin film composite membranes of acid-hydrolyzed PIM-1

  • Yu, M.
  • Foster, A. B.
  • Alshurafa, M.
  • Luque-Alled, J. M.
  • Gorgojo, P.
  • Kentish, S. E.
  • Scholes, C. A.
  • Budd, P. M.
The polymer of intrinsic microporosity PIM-1 was synthesized with different topologies and negligible network content. A more rapid heating rate from room temperature yielded a predominantly di-substituted PIM-1 (D-PIM-1), whereas a marginally lower heating rate produced a more branched structure (B-PIM-1). Both polymers were acid-hydrolyzed to give carboxylic acid functionalization (cPIM-1), as indicated by FT-IR, 1H NMR, and elemental analysis. Both PIM-1 and cPIM-1 were processed into self-supported membranes and into thin film composite (TFC) membranes on a polyacrylonitrile support. For a 70% hydrolyzed polymer (D-cPIM-1-70%), the initial CO2 permeance reached 7700 GPU, with ideal selectivity of 56 for CO2/N2 and 37 for CO2/CH4. D-PIM-1 and D-cPIM-1-70% showed 85% and 52% CO2 permeance drop after 60 days’ aging, respectively. B-PIM-1, with initial CO2 permeance of 3100 GPU and ideal selectivity of 19 for CO2/N2 and 11 for CO2/CH4, showed only a 65% decrease. Polymer that was both branched and hydrolyzed (B-cPIM-1-73&81%), with CO2 permeance of 3200 GPU and selectivity of 64 for CO2/N2 and 45 for CO2/CH4, showed no decrease of CO2 permeance after 60 days. The branched structure is crucial for reducing membrane aging. Plasticization gave rise to reduced selectivity in mixed gas experiments, but nevertheless TFC membranes prepared from B-cPIM-1-81% were able to concentrate CO2 to 38% from a 10% CO2/90% N2 mixture at 4.8 bar.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Organic solvent-free fabrication of thin film polyamide/zeolitic imidazolate framework membranes for removal of dyes from water

  • Luque-Alled, José Miguel
  • Martínez-Izquierdo, Lidia
  • Gorgojo, Patricia
  • Téllez, Carlos
  • Coronas, Joaquín
Thin film composite (TFC) polyamide (PA) membranes in combination with zeolitic imidazolate frameworks (ZIF), such as ZIF-8 and ZIF-93, have been fabricated using a novel approach based on vapor phase interfacial polymerization (VIP). These membranes have been investigated for nanofiltration (NF) of aqueous solutions of organic dyes, such as Rose Bengal (RB, 1017 Da), Sunset Yellow (SY, 452 Da) and Acridine Orange (AO, 265 Da). The preparation of the PA layer by VIP technique avoids the use of any organic solvent that is typically required in the conventional PA synthesis. Both ZIF-8 and ZIF-93 were initially synthesized using conventional procedures (methanol-based route) and incorporated to the PA layer in two different configurations: i) thin film nanocomposite with ZIF embedded within the PA film, and ii) bilayer membranes with a layer of ZIF between the support and the PA layer. The synthesis of ZIF-93 using a water-based route was developed for the bilayer configuration allowing for an organic solvent-free fabrication of PA/ZIF-93 bilayer VIP-TFC. These membranes showed the highest water permeances of 2.6, 3.4 and 2.2 L m-2h−1 bar−1 for RB, SY and AO, respectively. As compared to the control membrane VIP-TFC, this represents permeance increases of 69–117% and maintains high (greater than 99%) rejection of all the organic dyes. Membrane characterization demonstrated that the permeance enhancement for bilayer PA/ZIF-93 VIP-TFCs is related to an improved hydrophilicity, higher surface roughness and thinner selective layers. The prepared membranes demonstrated excellent cycle stability, maintaining their initial water permeance and dye rejection throughout 34 h of long-term operation, and being able to operate across the entire pH range studied (pH 3 to 9) without any detrimental effects on performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Solubility study and thermodynamic modelling of succinic acid and fumaric acid in bio-based solvents

  • López Porfiri, Pablo
  • Gorgojo, Patricia
  • González Miquel, María
Objectives: To evaluate whether there is an association between the serum levels of the novel insulin-like adipokine isthmin-1 (ISM1) and obesity-related phenotypes in a population of Spanish children and to investigate the plausible molecular alterations behind the alteration of the serum levels of this protein in children with obesity.Methods: The study population is a sub-cohort of the PUBMEP research project, consisting of a cross-sectional population of 119 pubertal children with overweight (17 boys, 19 girls), obesity (20 boys, 25 girls), and normal weight (17 boys, 21 girls). All subjects were classified into experimental groups according to their sex, obesity, and insulin resistance (IR) status. They were counted anthropometry, glucose and lipid metabolism, inflammation and cardiovascular biomarkers as well as isthmin-1 (ISM1) serum levels. This population was intended as a discovery population to elucidate the relationship between obesity and ISM1 levels in children. Furthermore, the study population had blood whole-genome DNA methylation examined, allowing deepening into the obesity-ISM1 molecular relationship. Results: Higher serum ISM1 levels were observed in boys with obesity than in normal weight (P = 0.004) and overweight (P = 0.007) boys. ISM1 serum levels were positively associated with body mass index (BMI) Z-score (P = 0.005) and fat mass (P = 0.058) and negatively associated with myeloperoxidase (MPO) (P = 0.043) in boys. Although we did not find associations between ISM1 serum levels and metabolic outcomes in girls, which may indicate a putative sexual dimorphism, fat mass was positively associated in all children, including boys and girls (P = 0.011). DNA methylation levels in two-enhancer-related CpG sites of ISM1 (cg03304641 and cg14269097) were associated with serum levels of ISM1 in children. Conclusions: ISM1 is associated with obesity in boys at the pubertal stage, elucidating how this protein might be of special relevance as a new biomarker of obesity in children. Further studies including a longitudinal design during puberty are needed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High gas permeability in aged superglassy membranes with nanosized UiO-66-NH2/cPIM-1 network fillers

  • Qiu, Boya
  • Yu, Ming
  • Luque-Alled, José Miguel
  • Ding, Shengzhe
  • Foster, Andrew B.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
Superglassy membranes synthesised by polymers of intrinsic microporosity (PIMs) suffer from physical aging and show poor gas permeance over time, especially thin membranes, due to the fast rearrangement of nonequilibrium polymer chains. Herein, we constructed a novel PIM‐1 thin film nanocomposite membrane (TFN) using nanosized UiO‐66−NH2 (≈10 nm)/carboxylated PIM‐1 (cPIM‐1) as the composite filler. Unlike conventional fillers, which interact with the polymer only via the surface, the UiO‐66−NH2/cPIM‐1 forms a stable three‐dimensional (3D) network intertwining with the polymer chains, being very effective to impede chain relaxation, and thus physical aging. Nanosizing of UiO‐66−NH2 was achieved by regulating the nucleation kinetics using carbon quantum dots (CQD) during the synthesis. This led to increased surface area, and hence more functional groups to bond with cPIM‐1 (via hydrogen bonding between −NH2 and −COOH groups), which also improved interfacial compatibility between the 3D network and polymer chains avoiding defect formation. As a result, the novel TFN showed significantly improved performance in gas separation along with reduced aging (i.e. ≈6 % loss in CO2 permeability over 63 days); the aged membranes had a CO2 permeance of 2504 GPU and ideal selectivity values of 37.2 and 23.8 for CO2/N2 and CO2/CH4, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High gas permeance in CO2-selective thin film composite membranes from bis(phenyl)fluorene-containing blends with PIM-1

  • Almansour, Faiz
  • Foster, Andrew B.
  • Ameen, Ahmed W.
  • Mohsenpour, Sajjad
  • Budd, Peter M.
  • Gorgojo, Patricia
A novel approach to improve the initial performance as well as to prevent physical aging of superglassy high free volume polymer PIM-1 is reported. Bis(phenyl)fluorene-based polymer of intrinsic microporosity (Cardo-PIM-1) was used at different loadings in PIM-1 to fabricate thin film composite (TFC) membranes and freestanding membranes. The gas performances of both TFCs and thick freestanding membranes exhibited similar trends; higher CO2 permeance and higher CO2/CH4 selectivity at relatively low loadings (≤5 wt %). TFCs containing 5 wt % Cardo-PIM-1 achieved a CO2 permeance of (12600 ± 866 GPU), which corresponds to about a threefold increase as compared to the pristine TFC-PIM-1 membranes (2850 ± 254 GPU) and higher CO2/CH4 selectivity (14.6 ± 1.3) as compared to pure PIM-1 (10 ± 3). With regards to physical aging, PIM-1 TFC membranes experienced a 96 % reduction in CO2 permeance after 1 year. However, for the TFCs containing 5 wt % cardo the reduction was considerably lower (59%) and all took place at an initial stage of up to 37 days, remaining at a good and stable CO2 permeance of c.a. 5000 GPU for the remaining testing period of up to one year
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spray coating of 2D materials in the production of antifouling membranes for membrane distillation

  • Skuse, Clara
  • Alberto, Monica
  • Luque-Alled, José Miguel
  • Mercadillo, Vicente Orts
  • Asuquo, Edidiong
  • Gallego-Schmid, Alejandro
  • Azapagic, Adisa
  • Gorgojo, Patricia
Membrane surface coatings with 2D materials have been shown to exhibit antifouling properties for water-treatment applications; however, synthesis methods currently based on vacuum filtration are not easily scalable. This study describes a scalable method for coating membranes with a range of 2D materials including graphene oxide (GO), hexagonal boron nitride (hBN), molybdenum disulphide (MoS2) and tungsten disulphide (WS2). Isopropyl alcohol solutions containing each class of the 2D flakes were spray-coated onto commercial polyvinylidene fluoride (PVDF) using a pyrolyser. The nanomaterials were secured with polydopamine (PDA) as a crosslinker in a method that could easily be integrated into a scalable roll-to-roll process. Changes in morphology, surface roughness, hydrophobicity, mechanical durability and chemical composition were evaluated using scanning electron microscopy, atomic force microscopy, contact angle, tensile strength measurements and Fourier-transform infrared spectroscopy. The 2D nanomaterials-coated membranes were tested in membrane distillation (MD) experiments over 72 h and compared to pristine PVDF and PDA/PVDF membranes. Salt rejection and MD performance stability were evaluated using feedwaters with high concentrations of humic acid (150 ppm) and paraffin oil (200 ppm) simulating simple organic wastewater from oil and gas extraction. The flux decline ratio was measured in terms of percentage permeate loss per hour (%/h), to allow for future comparisons with studies with different experimental times. The pristine PVDF membrane failed after 10 h by pore-wetting due to fouling while the PDA/PVDF membrane had the largest flux decline ratio (0.3 %/h). The membranes coated with GO and hBN had flux decline ratios orders of magnitude lower (0.0021 ± 0.005 and 0.028 ± 0.01 %/h, respectively). All membranes had a high salt rejection (>99.9 %). The GO-coated membrane was the only membrane type that was able to treat both surfactant-containing and foulant-containing feedwaters. The improved performance is attributed to the decrease in both surface roughness and hydrophobicity, which reduces the adsorption of foulants onto the membrane surface. This work shows a facile, scalable method to overcome fouling limitations in MD.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

GO as gutter layer in superglassy thin film composite membranes for enhanced gas separation

  • Qiu, Boya
  • Yu, Ming
  • Alshurafa, Mustafa
  • López-Porfiri, Pablo
  • Perez-Page, María
  • Foster, Andrew B.
  • Budd, Peter M.
  • Fan, Xiaolei
  • Gorgojo, Patricia
Polymers with intrinsic microporosity (PIM) have gathered considerable attention over the last two decades for fabricating high-performance membranes for CO2 separation, owing to their highly permeable and porous structures. Particularly, thin film composite (TFC) membranes with thin active layers (<5 μm) deposited onto more porous substrates are suitable for practical applications as they offer a combination of high permeance and mechanical strength. However, penetration of the active layer into the pores of the substrate leads to additional mass transfer resistance and creates defects and voids, thereby reducing the membrane's permeance and selectivity. Herein, we introduced graphene oxide (GO) as a gutter layer in TFCs made with PIM-1. GO flakes were deposited to cover the substrates partially, thereby reducing polymer penetration while maintaining good structural integrity of the TFCs. We successfully fabricated a series of PIM-1 TFCs by kiss coating, with the thinnest active layer at ∼179 nm. These TFCs exhibited an ideal selectivity for CO2/N2 of 44.4, and the CO2 permeance was increased by up to 104 % under optimised conditions. The strategy is generic as well which was validated using carboxylated PIM-1 (cPIM-1).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Scaled-up graphene oxide membranes: Improved membrane distillation performance and antifouling properties

  • Skuse, Clara
  • Aparicio, Fernando
  • Andrés-Mañas, Juan Antonio
  • Zaragoza, Guillermo
  • Gallego-Schmid, Alejandro
  • Azapagic, Adisa
  • Lewthwaite, Katie
  • Gorgojo, Patricia
Membrane distillation (MD) is a promising desalination technology whose commercial implementation remains limited by high thermal energy consumption and membrane fouling. In this work, thermally efficient graphene oxide (GO)-functionalised membranes were fabricated and evaluated at pilot scale for the first time. Polyvinylidene fluoride (PVDF) membranes coated with polydopamine (PDA) and spray-coated with GO were tested in air-gap and vacuum-assisted air-gap MD (AGMD and V-AGMD) systems producing up to 1.5 L h⁻¹ of potable water. Membrane performance was evaluated in terms of permeate flux, salt rejection, antifouling behaviour and thermal efficiency using synthetic seawater, brine, foulant-containing feedwater and real seawater. The GO-PDA/PVDF membranes resisted fouling-induced pore wetting for over 72 h, compared with 20 h for pristine PVDF membranes. The GO coating reduced the fouling rate from 0.24%/h for the PDA/PVDF control membrane to 0.07%/h and enabled complete flux recovery (FRR = 100%) following a 30-minute rinse with deionised water at 75 °C, indicating fully reversible fouling. By comparison, the PDA/PVDF membrane exhibited an FRR of 87%. Experiments using real seawater also demonstrated stable operation and a 25% higher permeate flux relative to the control membrane. The GO-functionalised membranes also exhibited enhanced thermal performance, with up to 40% higher thermal efficiency and reductions in STEC of 16.7% and 9.8% for AGMD and V-AGMD, respectively. These findings demonstrate the potential of scalable GO coatings to improve the operational and energetic performance of MD desalination systems.