Pasar al contenido principal

FUNCIONALIZACION DE MEMBRANAS COMO ELEMENTO CLAVE EN EL DESARROLLO DE PROCESOS AVANZADOS DE SEPARACION

PID2019-105827RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CANTABRIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocompatibility enhancement of PLA by the generation of bionanocomposites with fish collagen derivatives

  • Moya-López, Carmen
  • Valcárcel Barros, Jesús
  • Vázquez, José Antonio
  • Bourson, Patrice
  • Chapron, David
  • Solano, Eduardo
  • Piñeiro, Manuel M.
  • Hermida-Merino, Carolina
  • Hermida-Merino, Daniel
8 pages, 4 figures, 2 tables, Nanocomposites comprising bio-based polymers have become relevant in fields such as food packaging and biomedical applications. Polylactide (PLA) is a chiral and aliphatic polyester that can attain a wide range of tacticities which enables to tailor of the final material properties. However, PLA exhibits hydrophobic characteristics requiring the enhancement of its bioactivity by the generation of composites with hydrophilic materials as an approach to generate multifunctional material. Collagen is a natural and hydrophilic biopolymer that is partially hydrolyzed to obtain a material exhibiting higher solubility in aqueous solutions, namely gelatin, thus improving collagen usability. Herein, a series of free-standing films comprising different concentrations of commercial PLA and gelatin obtained from waste fisheries were produced to afford biocompatible coatings with promising biomedical applications. The multiscale structural characterization performed from the molecular scale (FTIR) to the nano-scale (SAXS/WAXS) level has been correlated with the thermal behaviour (DSC) and degradation (TGA) of the bionanocomposites generated to understand the processing conditions on the final material, The authors acknowledge the financial support received from Project KET4F-Gas-SOE2/P1/P0823, which is co-financed by the European Regional Development Fund within the framework of Interreg Sudoe Programme and project PID2019-105827RB-I00–Agencia Estatal de Investigación, Spain, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined Gelatin-Chondroitin Sulfate Hydrogels with graphene nanoparticles

  • Hermida-Merino, Carolina
  • Valcárcel Barros, Jesús
  • Vázquez, José Antonio
  • Cabaleiro, David
  • Moya-López, Carmen
  • Piñeiro, Manuel M.
  • Hermida-Merino, Daniel
10 pages, 5 figures, 3 tables, Creating flexible, high-strength hydrogels from harmless, low-cost natural polymers is an area of intense research today due to their potential applications in the biomedical field, which demands materials with ambivalent physicochemical features. In particular, great efforts were devoted to the preparation of sustainable biohydrogels, composed of hydrophilic networks of renewable, biocompatible, biodegradable, and low-cost biopolymers. Bionanocomposites are a promising synthetic approach to combine specific multifunctional materials with targeted physicochemical properties. Novel bionanocomposite hydrogels were designed by combining both chondroitin sulfate (CS) as well as gelatin (GE) obtained from the waste generated by the fish industries to form double fibre networks with tailored properties. In addition, hybrid bionanocomposites were achieved by introducing graphene nanoparticles (xGnP) into the double fibrillar network (GE/CS) to enhance the physicochemical properties. The bionanocomposite nanostructures were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimeter (DSC) while their rheological properties and thermal stability were determined by rheological and thermogravimetric analyses (TGA), respectively. The likely interactions between CS and gelatin in the GE/CS hydrogel network were proved by ATR-FTIR spectroscopy. The incorporation of xGnP improved the mechanical properties of the GE/CS fibrillary network by an order of magnitude in the shear storage modulus. Eventually, the generated bionanocomposites hydrogels and bionanocomposite hybrid hydrogels have promising potential for applications in many biomedical fields, including drug delivery and tissue engineering by mimicking tissue extracellular matrix components such as the gelatin for collagen and the CS in the cartilage, The authors acknowledge the financial support received from Project KET4F-Gas-SOE2/P1/P0823, which is co-financed by the European Regional Development Fund within the framework of Interreg Sudoe Programme and project PID2019-105827RB-I00–Agencia Estatal de Investigación, Spain, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Outstanding performance of PIM-1 membranes towards the separation of fluorinated refrigerant gases

  • Gutiérrez-Hernández, Sergio V.
  • Pardo, Fernando
  • Foster, Andrew B.
  • Gorgojo, Patricia
  • Budd, Peter M.
  • Zarca, Gabriel
  • Urtiaga, Ane
The recycling of depleted high global warming mixtures of fluorinated gases (F-gases) with close-boiling or azeotropic behavior requires advanced separation processes to obtain effectively the pure components. Herein, several types of PIM-1 membranes were tested for the first time towards the separation of hydrofluorocarbons and hydrofluoroolefins, showing extraordinarily high permeability coefficients for the value-added difluoromethane (R-32), up to 4100 barrer, coupled with high selectivity for the F-gas pairs of interest. Additionally, the solubility of selected F-gases in PIM-1 was measured and fitted to the dual-mode and Guggenheim, Anderson and de Boer sorption models. The separation performance of the standard PIM-1 and a highly branched PIM-1 was examined with the mixture R-410A (containing R-32 and pentafluoroethane R-125) to assess the influence of the membrane topology on the mixed-gas permeation properties over time (physical aging). Considering that the branched PIM-1 membrane was the least impacted by the aging phenomena, it was used to recover high purity R-32 (concentration in the permeate side as high as 98.9 vol % was achieved) from refrigerant gas mixtures R-410A and R–454B (mixture of R-32 and R-1234yf) in continuous long-term experiments. Results showed the great potential of PIM-1 membranes for the separation of R-32 from refrigerant mixtures collected from end-of-life equipment., This research is supported by project PID2019-105827RB-I00 funded by MCIN/AEI/10.13039/501100011033. F.P. and S.V.G.H. acknowledge the support of the Spanish State Research Agency and the Spanish Ministry of Science and Innovation (grants IJC2020-043134-I and PRE2020-093568, respectively). A.B.F and P.M.B acknowledge EPSRC Grant ep/v047078/1 (SynHiSel). P.G. is supported by Grant RYC2019-027060-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

6FDA-polyimide thin-film composite hollow fiber membranes for hydrofluorocarbons and CO2 separations

  • Gutiérrez-Hernández, S. V.
  • Rico-Martínez, S.
  • Pardo, F.
  • Álvarez, Cristina
  • Miguel, J. A.
  • Zarca, G.
  • Urtiaga, A.
Herein, high molecular weight fluorinated aromatic polyimides were assessed for the first time to recover difluoromethane (R-32) from its blends with other hydrofluorocarbons and hydrofluoroolefins (R-134a: 1,1,1,2-tetrafluoroethane, R-125: pentafluoroethane, and R-1234yf: 2,3,3,3-tetrafluoropropene). First, a screening was performed with thick flat membranes made of the 4,4’-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and three different amines: 2,2′-bis(4-aminophenyl)hexafluoropropane (6FpDA), 2,4,6-trimethyl-m-phenylenediamine (TMPD), and 2,3,5,6-tetramethyl-1,3-phenyldiamine (durene). As a result, 6FDA-TMPD was selected for the fabrication of defect-free hollow fiber-thin film composite membranes (HF-TFCM) due to its superior performance for the separation of R-32. These HF-TFCMs showed excellent separation performance to reclaim high-purity R-32 (permeate concentration >99 vol%) from the commercial binary blends R-410A and R-454B (a mixture of R-32 and R-1234yf). In addition, we report for the first time the membrane recovery of R-32 from the ternary blend R-407C (R-32/R-134a/R-125 38.2:43.8:18 vol%). Eventually, the separation of CO from synthetic gas mixtures of CO/CH (50:50 vol%) and CO/N (15:85 vol%) was performed for benchmarking, showing that the prepared HF-TFCM kept the separation performance of the 6FDA-TMPD thick membranes., We kindly acknowledge the funding of projects PID2019-105827RB- I00, PID2022-138028OB-I00, PID2020-118547GB-100, PID2019- 109403RB-C22, PID2019-109403RB-C21 by the Spanish State Research Agency and partially by the European Fund for Regional Development (EU), and the Regional Government of Castilla y Le´on (project VA224P20). F.P., S.V.G.H. and S.R.M acknowledge the support of the Spanish State Research Agency and the Spanish Ministry of Science and Innovation (grants IJC2020-043134-I, PRE2020-093568 and, FPU2019/ 05446 respectively). All authors kindly thank Dr. ´Angel E. Lozano for his advice with the selection of polymers and his helpful discussions and support. We would also like to thank 3M Company for generous dona- tion of polypropylene hollow fibers
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Outstanding performance of PIM-1 membranes towards the separation of fluorinated refrigerant gases

  • Gutiérrez-Hernández, Sergio V.
  • Pardo, Fernando
  • Foster, Andrew B.
  • Gorgojo, Patricia
  • Budd, Peter M.
  • Zarca, Gabriel
  • Urtiaga, Ane
The recycling of depleted high global warming mixtures of fluorinated gases (F-gases) with close-boiling or azeotropic behavior requires advanced separation processes to obtain effectively the pure components. Herein, several types of PIM-1 membranes were tested for the first time towards the separation of hydrofluorocarbons and hydrofluoroolefins, showing extraordinarily high permeability coefficients for the value-added difluoromethane (R-32), up to 4100 barrer, coupled with high selectivity for the F-gas pairs of interest. Additionally, the solubility of selected F-gases in PIM-1 was measured and fitted to the dual-mode and Guggenheim, Anderson and de Boer sorption models. The separation performance of the standard PIM-1 and a highly branched PIM-1 was examined with the mixture R-410A (containing R-32 and pentafluoroethane R-125) to assess the influence of the membrane topology on the mixed-gas permeation properties over time (physical aging). Considering that the branched PIM-1 membrane was the least impacted by the aging phenomena, it was used to recover high purity R-32 (concentration in the permeate side as high as 98.9 vol % was achieved) from refrigerant gas mixtures R-410A and R–454B (mixture of R-32 and R-1234yf) in continuous long-term experiments. Results showed the great potential of PIM-1 membranes for the separation of R-32 from refrigerant mixtures collected from end-of-life equipment.