DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación
Artículo científico (JournalArticle)
6FDA-polyimide thin-film composite hollow fiber membranes for hydrofluorocarbons and CO2 separations
Herein, high molecular weight fluorinated aromatic polyimides were assessed for the first time to recover difluoromethane (R-32) from its blends with other hydrofluorocarbons and hydrofluoroolefins (R-134a: 1,1,1,2-tetrafluoroethane, R-125: pentafluoroethane, and R-1234yf: 2,3,3,3-tetrafluoropropene). First, a screening was performed with thick flat membranes made of the 4,4’-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and three different amines: 2,2′-bis(4-aminophenyl)hexafluoropropane (6FpDA), 2,4,6-trimethyl-m-phenylenediamine (TMPD), and 2,3,5,6-tetramethyl-1,3-phenyldiamine (durene). As a result, 6FDA-TMPD was selected for the fabrication of defect-free hollow fiber-thin film composite membranes (HF-TFCM) due to its superior performance for the separation of R-32. These HF-TFCMs showed excellent separation performance to reclaim high-purity R-32 (permeate concentration >99 vol%) from the commercial binary blends R-410A and R-454B (a mixture of R-32 and R-1234yf). In addition, we report for the first time the membrane recovery of R-32 from the ternary blend R-407C (R-32/R-134a/R-125 38.2:43.8:18 vol%). Eventually, the separation of CO from synthetic gas mixtures of CO/CH (50:50 vol%) and CO/N (15:85 vol%) was performed for benchmarking, showing that the prepared HF-TFCM kept the separation performance of the 6FDA-TMPD thick membranes., We kindly acknowledge the funding of projects PID2019-105827RB-
I00, PID2022-138028OB-I00, PID2020-118547GB-100, PID2019-
109403RB-C22, PID2019-109403RB-C21 by the Spanish State Research
Agency and partially by the European Fund for Regional Development
(EU), and the Regional Government of Castilla y Le´on (project
VA224P20). F.P., S.V.G.H. and S.R.M acknowledge the support of the
Spanish State Research Agency and the Spanish Ministry of Science and
Innovation (grants IJC2020-043134-I, PRE2020-093568 and, FPU2019/
05446 respectively). All authors kindly thank Dr. ´Angel E. Lozano for his
advice with the selection of polymers and his helpful discussions and
support. We would also like to thank 3M Company for generous dona-
tion of polypropylene hollow fibers
Proyecto:
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2019-105827RB-I00
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 PID2022-138028OB-I00
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2020-118547GB-I00
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2019-109403RB-C22
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2019-109403RB-C21