Pasar al contenido principal

ESTUDIO MOLECULAR DE TRANSPORTE DE GASES EN POLIMEROS VITREOS MEDIANTE RESONANCIA MAGNETICA NUCLEAR Y ESPECTROSCOPIA DIELECTRICA

PID2019-108552GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing in-situ the molecular dynamics of gas-poly(1-trimethylsilyl-1-propyne) (polyTMSP) systems with dielectric and NMR spectroscopies

  • Garrido, Leoncio
  • Benito, Esperanza
  • López-González, Mar
The molecular dynamics of poly(1-trimethylsilyl-1-propyne) in the presence of N, CO, CH and CH, is assessed in situ with broadband dielectric and solid state NMR spectroscopies. The measurements of the dielectric permittivity and the analysis of the dielectric spectra show two secondary β relaxations and the absence of a glass transition. These relaxations could be associated to highly flexible and disordered regions (β), and to more rigid and ordered ones (β). The E of β observed in the presence of CO was the highest among the four gases studied, suggesting an increased presence in disordered regions. The results of C T NMR relaxation measurements provide complementary information on the polymer backbone dynamics. The Ts of main chain carbons increase as the concentration of gas sorbed in the polymer increases, indicative of a decrease in chain mobility. The combination of both spectroscopies afforded additional insight toward the understanding of gas transport in glassy microporous polymers., The authors gratefully acknowledge financial support provided by the Spanish Ministerio de Ciencia e Innovación, project PID2019- 108552 GB-I00, and the CSIC. Also, Alberto Hernando (ICTP-CSIC workshop) is acknowledged for the design and machining of the cell used for the dielectric measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Naphthalene Tetrazole-Based Nickel Metal-Organic Framework as a Filler of Polycarbonate Membranes to Improve CO2 and H2 Separation

  • Valverde-Gónzález, Antonio
  • Yuriychuk, Nastasiya
  • Borrallo-Aniceto, M. Carmen
  • Gándara Barragán, Felipe
  • Iglesias, Marta
  • López-González, Mar
  • Maya, Eva M.
A tetrazole-naphthalene linker was used to prepare a nickel MOF (metal-organic framework) (NiNDTz) with interesting properties: a specific surface area S of 320 mg (S 436 mg), high thermal stability (Td = 300 °C), and CO uptake of 1.85 mmolg, attributed to the tetrazole groups to be used as fillers in gas separation membranes. The role of these groups was crucial in the mechanical properties of mixed membranes prepared using polycarbonate as a polymer matrix, providing a very homogeneous filler distribution and also in the gas separation properties since a simultaneous increase in permeability and selectivity was achieved, especially in the hybrid membrane containing 20% filler (PC@NiNDTz-20%). This membrane exhibited an excellent balance between permeability (P) and selectivity (α) with an increase in the permeability of CO and H, 177 and 185%, respectively, and improvements in the selectivity of these gases against greenhouse gases such as methane and ethylene (between 15 and 28% improvement). These results make this membrane competitive to deal with separations in which these gases are involved, and are of special interest for the H/CH separation since it clearly improves the performance of pure PC and no better PC-based membranes have been reported in the literature for this separation., The authors acknowledge grants PID2020-112590GB-C22funded by MCIN/AEI/10.13039/501100011033, and A.V.G.and Ministerio de Universidades for FPU17/03463. M.L.-G.gratefully acknowledges financial support provided by Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI), and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the ProjectPGC2018-095364−B-I00 and by Ministerio de Ciencia e Innovación and the CSIC, project PID2019-108552GB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An NMR study of hydrofluorocarbon mixed-gas solubility and self-diffusivity in the ionic liquid 1-ethyl-3-methylimidazolium dicyanamide

  • Viar, Miguel
  • Pardo, Fernando
  • Zarca, Gabriel
  • Garrido, Leoncio
  • Urtiaga, Ane
To date, the design of advanced separation processes, such as the extractive distillation with ionic liquids (ILs), for the separation of common close-boiling refrigerant blends relies almost exclusively on binary equilibrium data obtained for single-gas/solvent systems, thus neglecting the influence of possible mixture effects. In this work, Nuclear Magnetic Resonance (NMR) spectroscopy and pulsed gradient spin echo (PGSE) NMR are pro- posed for the sequential assessment of the single and mixed-gas vapor-liquid equilibrium and self-diffusivity of two fluorinated refrigerants, difluoromethane (R-32) and pentafluoroethane (R-125), in the IL 1-ethyl-3-methyl- imidazolium dicyanamide at 303.1 K and pressures up to 4 bar, either as pure R-32 or using the commercial refrigerant blend R-410A. The results confirmed that the mixed-gas solubility and self-diffusivities were essen- tially equal to those obtained with pure feed gas, thus significant mixing effects were not observed for this particular system. However, an increase in the self-diffusion coefficients was observed with the concentration of absorbed gas, which was more significant for the smallest hydrofluorocarbon (R-32) than for R-125. This technique also allowed evaluating the mobility of the IL moieties, which was slightly higher for the IL anion. Moreover, the self-diffusion coefficients of the IL ions also increased with the amount of gas absorbed, yet less markedly than for the refrigerants. Overall, the NMR technique proved to be an accurate method for the rapid screening of possible mixture effects in equilibrium and transport properties of refrigerant and IL systems, thus providing essential information for designing novel advanced separation processes., The authors acknowledge the financial support of MICIU/AEI/ 10.13039/501100011033 and the European Union NextGenerationEU/ PRTR to projects TED2021-129844B-I00 and PID2022-138028OB-I00 (Universidad de Cantabria), and project PID2019-108552GB-I00 (ICTP- CSIC) as well as project LIFE4F-Gases (LIFE20CCM/ES/001748) co- funded by the European Union LIFE programme. F. Pardo thanks the postdoctoral fellowship IJC2020–043134-I “Juan de la Cierva Incorpo- raci´on”. M. Viar acknowledges the FPU grant (FPU22/04137) awarded by the Spanish Ministry of Education and Professional Training., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elucidating the Molecular Mechanisms by which Porous Polymer Networks Affect Structure, Aging Propensity, and Selectivity of Microporous Glassy Polymer Membranes using a Multiscale Approach

  • Condes, L. C.
  • Webb, M. T.
  • Le, T. T. B.
  • Box, W. J.
  • Doherty, C. M.
  • Gali, A.
  • Garrido, Leoncio
  • Deng, J.
  • Matesanz-Niño, L.
  • Lozano López, Ángel Emilio
  • Álvarez, Cristina
  • Buongiorno Nardelli, M.
  • Striolo, A.
  • Hill, A. J.
  • Galizia, M.
Microporous glassy polymer membranes suffer from physical aging, which adversely affects their performance in the short time frame. We show that the aging propensity of a model microporous polymer, poly(1-trimethylsilyl-1-propyne) (PTMSP), can be effectively mitigated by blending with as little as 5 wt % porous polymer network (PPN) composed of triptycene and isatin. The aging behavior of these materials was monitored via N pure gas permeability measurements over the course of 3 weeks, showing a 14% decline in PTMSP blended with 5 wt % PPN vs a 41% decline in neat PTMSP. Noteworthy, PPNs are 2 orders of magnitude cheaper than the porous aromatic frameworks previously used to control PTMSP aging. A variety of experimental and computational techniques, such as Positron Annihilation Lifetime Spectroscopy (PALS), free volume measurements, cross-polarization/magic angle spinning (CP/MAS) C NMR, transport measurements and molecular dynamics (MD) simulations were used to uncover the molecular mechanisms leading to enhanced aging resistance. We show that partial PTMSP chain adsorption into the PPN porosity reduces the PTMSP local segmental mobility, leading to improved aging resistance. Permeability coefficients were broken into their elementary sorption and diffusion contributions, to elucidate the mechanism by which the reduced PTMSP local segmental mobility affects selectivity in gas separation applications. Finally, we demonstrate that in these systems, where both chemical and physical interactions take place, transport coefficients must be corrected for thermodynamic nonidealities to avoid erroneous interpretation of the results., M.G., A.S., T.T.B.L. and M.B.N. acknowledge financial support from the US Department of Energy (DOE, Office of Basic Energy Sciences) under grant No. DE-SC0024554. A.S. also acknowledges support from the Asahi Glass Chair of Chemical Engineering at the University of Oklahoma. Molecular simulations were performed at the Oklahoma Supercomputer Center for Education and Research (OSCER). The thermog- ravimetric analyzer setup used in this study was supported by the University of Oklahoma SEIP (Strategic Equipment Investment Program) Program. LCC acknowledges support from the National Science Foundation Graduate Research Fellowship Program (NSF-GRFP) under Grant No. 10557390. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation. L.M.N. and A.E.L. acknowledge support from the Spanish Government (AEI) through projects PID2019- 109403RB-C22/AEI/10.13039/501100011033, PID2019- 108552GB-I00, and PID2019-109403RB-C22/AEI/ 10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the distribution and molecular interactions of gases in membranes of PPO and PC with porous biphenyl-based knitting aryl polymer (K2Ph) and their influence on gas transport with NMR

  • López-González, Mar
  • Yuriychuk, Nastasia
  • Benito, Esperanza
  • Maya, Eva M.
  • Garrido, Leoncio
NMR spectroscopy combined with pulsed gradient spin-echo (PGSE) NMR are used to study, at the molecular scale, the interactions and transport of pure and mixed CO<inf>2</inf> and CH<inf>4</inf> in mixed matrix membranes (MMMs) of poly(2,6-dimethyl-p-phenylene oxide) (PPO) and poly[bisphenol A carbonate-co-4,4’-(3,3,5-trimethylcyclohexylidene) diphenol carbonate] (PC) with porous biphenyl-based knitting aryl polymer (K2Ph) as filler. The results of T<inf>1</inf>s relaxation times and chemical shifts measurements of the sorbed gases show two populations in the MMMs associated with the polymer and filler phases. Similarly, the analysis of the gases diffusion measurements leads to two components, fast and slow tentatively assigned to the filler and polymer phases in the MMMs, respectively. The comparison of NMR results with independent measurements of total gas permeability contributes to unveil the mechanisms of gas transport in membranes of glassy PPO and PC with porous K2Ph., This work was financially supported by the Spanish Ministerio de Ciencia e Innovación, projects PID2019-108552 GB-I00 and PID2022- 137762NB-I00, and the CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Gas Permeability of Polynorbornene Dicarboximides Bearing Sulfonyl Moieties

  • Onchi, Alejandro
  • Rubio-Rangel, Lisandra
  • Santiago, Arlette A.
  • Marín-Méndez, Brian Omar
  • López-González, Mar
  • Vargas, Joel
This article belongs to the Special Issue Advanced Polymeric Membranes: From Fabrication to Application., This work reports on the synthesis and ring-opening metathesis polymerization (ROMP) of two novel homologous sulfonyl-containing norbornene dicarboximide monomers, specifically, N-4-(trifluoromethylsulfonyl)phenyl-norbornene-5,6-dicarboximide (1a) and N-4-(trifluoromethylsulfonyl)phenyl-7-oxanorbornene-5,6-dicarboximide (1b) using the Grubbs 2nd generation catalyst (I). The polymers are thoroughly characterized by nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), thermomechanical analysis (TMA), thermogravimetric analysis (TGA), atomic force microscopy (AFM), and X-ray diffraction (XRD), among other techniques. A comparative study of gas transport in membranes based on these ROMP-prepared polymers is performed and the gases studied are hydrogen, oxygen, nitrogen, carbon dioxide, methane, ethylene and propylene. It is found that the presence of sulfonyl pendant groups in the polymer backbone increases the gas permselectivity in slight detriment of the gas permeability compared to a polynorbornene dicarboximide lacking sulfonyl groups. The membrane of the sulfonyl-containing polymer with an oxygen heteroatom in the cyclopentane ring, 2b, is also found to have one of the largest permselectivity coefficients reported to date for the separation of H2/C3H6 in glassy polynorbornene dicarboximides., Financial support from DGAPA-UNAM PAPIIT through project IN105525 is gratefully acknowledged. We thank SECIHTI for its generous support through the Basic and Frontier Science Project CBF-2025-I-2226. We gratefully acknowledge financial support provided by Ministerio de Ciencia, Innovación y Universidades through the Project PID2019-108552GB-100., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hexamethyltruxene-based hyper-crosslinked porous polymers as fillers in polysulfone membranes for H2 separation

  • Izquierdo, Sara
  • Méndez-Gil, Nayara
  • Uddin, M. Afsar
  • Gómez-Lor, Berta
  • López-González, Mar
  • Maya, Eva M.
This work reports novel efficient polysulfone mixed matrix membranes (MMMs) for the separation of H2 from hydrocarbons, such as methane and ethylene. The polysulfone matrix (PSF) are filled with a new hyper crosslinked polymer (HCP) based on methyl truxene (MeTx) units, which has been synthesized via mechano chemical polymerization. This method enables the sustainable production of the MeTx-HCP filler in just 3 h, offering excellent thermal stability, 43 % porosity, and a specific surface area of 1076 m2/g. Two MMMs con taining 20 % and 30 % by weight of filler were prepared, and their transport properties for O2, N2, CO2, H2, CH4, and C2H4 were evaluated. Compared to pure polysulfone, the incorporation of MeTx-HCP filler led to an increase in all permeability coefficients were obtained, along with enhanced selectivity for the separation of most gas pairs. Notably, H2 transport exhibited a significant enhancement, with permeability increasing by 234 % for membranes containing 20 % MeTx-HCP and by 836 % for those with 30 % filler, compared to neat polysulfone. The membranes exhibited H2 permeability values of 26,4 and 74 respectively. Additionally, for membrane containing 20 % MeTx-HCP, H2/C2H4 selectivity increased to 74 %, while H2/CH4 selectivity improved by up to 39 % with selectivity values of 36.2 and 44 respectively. For the latter gas pair, the separation performance exceeded that of other polysulfone membranes incorporating porous organic polymers, underscoring the strong potential of these mixed-matrix membranes (MMMs) for industrial H2 separation applications., This research was funded by MICIU/AEI/10.13039/501100011033 FEDER, European Union through PID2023-146114NB-C22, PID2023- 150022NB-I00. MLG gratefully acknowledge financial support provided by the Spanish Ministerio de Ciencia e Innovación, project PID2019- 108552 GB-I00 and the Severo Ochoa Centres of Excellence program (Grant CEX2024-001445-S)., Peer reviewed