Pasar al contenido principal

MATERIALES HIBRIDOS MULTIFUNCIONALES HECHOS A MEDIDA A PARTIR DE UNIDADES DE CONSTRUCCION SINGULARES: ENFOQUES INTEGRADORES PARA APLICACIONES AMBIENTALES

PID2020-112590GB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unveiling the potential of a covalent triazine framework based on [1]benzothieno[3,2-b][1]benzothiophene (DPhBTBT-CTF) as a metal-free heterogeneous photocatalyst

  • Borrallo-Aniceto, M. Carmen
  • Pintado-Sierra, Mercedes
  • Valverde-González, Antonio
  • Sánchez, Félix
  • Maya, Eva M.
  • Iglesias, Marta
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The development of photocatalysts that are effective in different organic processes is a topic of great interest to researchers in materials chemistry. Herein, we report the design and synthesis of a new covalent triazine framework (CTF) built by acid-catalyzed trimerization of 4,4¿-(benzo[b]benzo[4,5]thieno [2,3-d]thiophene-2,7-diyl)dibenzonitrile activated by microwaves that generates a new organic polymer, DPhBTBT-CTF. This CTF exhibits visible-light absorption due to the electron-donating BTBT units and the extended ¿-conjugated framework with the electron-acceptor triazine node and proves to be an efficient and versatile metal-free heterogeneous photocatalyst for different organic processes such as selective oxidations of both sulfides and benzyl alcohols to sulfoxides and benzaldehydes, respectively or the oxidative bromination of electron rich aromatic compounds. Moreover, two different proof of concept reactions were tested: the Diels¿Alder cycloaddition and the hydroxylation of boronic acids. Heterogeneity studies confirmed that this photocatalyst can be recycled without significant loss of selectivity, and also some mechanistic tests suggested the preferred oxidation pathway., The authors acknowledge the grants PID2020-112590GB-C22 and PID2020-112590GB-C21 funded by MCIN/AEI/ 10.13039/501100011033. The authors also acknowledge Dr M Luisa Ferrer and Laura Gonzalez for the electrochemical analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phenyl Extended Naphthalene-Based Covalent Triazine Frameworks as Versatile Metal-Free Heterogeneous Photocatalysts

  • Fuerte-Diez, Beatriz
  • Valverde-González, Antonio
  • Pintado-Sierra, Mercedes
  • Sánchez, Félix
  • Maya, Eva M.
  • Iglesias, Marta
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Two new covalent triazines frameworks (CTFs) containing phenyl extended naphthalene units (with and without methoxy groups in the naphthalene core) are prepared by thermal and microwave activation. Both procedures yield similar chemical structures combining triazine acceptor units with donor aromatic groups, but they generate some differences in the morphology, structural organization, CO2 adsorption capacity, and thermal and optical properties. Besides, the methoxy groups of the naphthalene core have also influence in some of these properties. The resulting phenyl extended naphthalene CTFs are efficiently utilized as metal-free heterogeneous photocatalyst for the selective aerobic oxidation of sulfides and the dehydrogenative cross-coupling reactions under visible-light irradiation, showing a high chemical stability., The authors acknowledge grants MAT2017-82288-C2-2-P and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". A.V.G. thanks Ministerio de Universidades for FPU17/03463.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Materiales híbridos multifuncionales basados en nano-unidades estructurales activas

  • Melero Gutierrez, Manuel
[ES] En este trabajo de Tesis Doctoral, la investigación se ha centrado en el desarrollo sintético de diferentes materiales basados en polímeros orgánicos covalentes (COPs) para estudiar y mejorar sus propiedades catalíticas en reacciones de transformación orgánica de gran interés industrial. Tras la preparación de cada uno de los COPs de estudio, se han caracterizado sus propiedades estructurales y se ha determinado el correcto ensamblaje de las subunidades activas seleccionadas para ser integradas en las paredes estructurales de estos materiales y conferirles reactividades intrínsecas en diferentes aplicaciones como la catálisis heterogénea siendo ésta en concreto, la principal de estudio. La reactividad de estos materiales se ha evaluado teniendo en cuenta las subunidades activas presentes en su estructura, los mecanismos de reacción en procesos de transformaciones orgánicas, los cuales son un gran interés en el entorno industrial. Finalmente, se ha definido una plataforma de modificación post-sintética de materiales tipo COP para ajustar selectivamente las propiedades químicas de los mismos y de este modo, adaptar su afinidad hacia compuestos específicos. Más específicamente, en el capítulo 3 se ha estudiado la esterificación de ácidos carboxílicos, que permite convertirlos a ésteres, es decir grupos funcionales más versátiles. Esta transformación se ha abordado desde el punto de vista de la catálisis heterogénea empleando COPs basados en subunidades sulfaradas: SOP-1 - SOP-4. El catalizador más eficiente para la esterificación de ácidos carboxílicos ha sido el denominado SOP-1, siendo este catalizador estable durante la reacción, pudiendo ser reciclado fácilmente. Además, el mecanismo de reacción en la esterificación de ácidos carboxílicos como el ácido levulínico con etanol ha sido catalizada por el material SOP-1 y se ha investigado el análisis cinético, resultando en una tendencia de pseudo primer orden. En el capítulo 4, se ha investigado la reacción de acoplamiento fotooxidativo de aminas primarias como la bencilamina catalizada por materiales tipo COP basados en subunidades de triazina y tiofeno, obtenidos mediante síntesis solvotermal. Este procedimiento es aplicable a una gran gama de sustratos como sulfuros aromáticos, compuestos muy demandados en la industria farmacéutica actual. Por último, en el capítulo 5, se afronta el desarrollo de nuevas metodologías de modificación post-síntesis para la funcionalización de COPs con propiedades catalíticas mejoradas. Para ello, se ha seleccionado el material tipo COP TAPB-OMePDA basado en unidades estructurales de 1,3,5-tris(4-aminofenil)benceno y 2,5-dimetoxi-p-fenilendialdehído como materiales de partida para que mediante la reacción de Diels-Alder o la reacción de Povarov, se consigan incorporar compuestos orgánicos activos localizados en el interior de sus poros. En concreto, funcionalizaciones con grupos aldehído o imidazol permitirán ser precursores adecuados para ajustar y mejorar las propiedades existentes de los COPs dirigidos hacia el área de la catálisis, intercambio iónico y adsorción selectiva de gases., [CA] En aquest treball de Tesi Doctoral, la investigació s'ha centrat en el desenvolupament sintètic de diferents materials basats en polímers orgànics covalents (COPs) per a estudiar i millorar les seues propietats catalítiques en reaccions de transformació orgànica de gran interés industrial. Després de la preparació de cadascun dels COPs d'estudi, s'han caracteritzat les seues propietats estructurals i s'ha determinat el correcte ensamblatge de les subunitats actives seleccionades per a ser integrades en les parets estructurals d'aquests materials i conferir-los reactivitats intrínseques en diferents aplicacions com la catàlisi heterogènia, sent aquesta, en concret, la principal d'estudi. La reactivitat d'aquests materials s'ha avaluat tenint en compte les subunitats actives presents en la seua estructura, els mecanismes de reacció en processos de transformacions orgàniques, els quals són de gran interés en l'entorn industrial. Finalment, s'ha definit una plataforma de modificació post-sintètica de materials tipus COP per a ajustar selectivament les propietats químiques d'aquests i d'aquesta manera, adaptar la seua afinitat cap a compostos específics. Més específicament, en el capítol 3 s'ha estudiat l'esterificació d'àcids carboxílics, que permet convertir-los en èsters, és a dir, grups funcionals més versàtils. Aquesta transformació s'ha abordat des del punt de vista de la catàlisi heterogènia emprant COPs basats en subunitats sulfurades: SOP-1 - SOP-4. El catalitzador més eficient per a l'esterificació d'àcids carboxílics ha sigut el denominat SOP-1, sent aquest catalitzador estable durant la reacció, podent ser reciclat fàcilment. A més, el mecanisme de reacció en l'esterificació d'àcids carboxílics com l'àcid levulínic amb etanol ha sigut catalitzat pel material SOP-1 i s'ha investigat l'anàlisi cinètic, resultant en una tendència de pseudo primer ordre. En el capítol 4, s'ha investigat la reacció d'acoblament fotooxidatiu d'amines primàries com la bencilamina catalitzada per materials tipus COP basats en subunitats de triazina i tiofè, obtinguts mitjançant síntesi solvotermal. Aquest procediment és aplicable a una gran varietat de substrats com sulfurs aromàtics, compostos molt demandats en la indústria farmacèutica actual. Finalment, en el capítol 5, s'aborda el desenvolupament de noves metodologies de modificació post-síntesi per a la funcionalització de COPs amb propietats catalítiques millorades. Per a això, s'ha seleccionat el material tipus COP TAPB-OMePDA basat en unitats estructurals de 1,3,5-tris(4-aminofenil)benzè i 2,5-dimetoxi-p-fenilendialdehid com a materials de partida perquè mitjançant la reacció de Diels-Alder o la reacció de Povarov, s'aconseguisca incorporar compostos orgànics actius localitzats en l'interior dels seus porus. En concret, funcionalitzacions amb grups aldehid o imidazol permetran ser precursors adequats per a ajustar i millorar les propietats existents dels COPs dirigits cap a l'àrea de la catàlisi, intercanvi iònic i adsorció selectiva de gasos., [EN] In this Doctoral Thesis, the research has focused on the synthetic development of various materials based on covalent organic polymers (COPs) to study and enhance their catalytic properties in organic transformation reactions of great industrial interest. After the preparation of each COP under study, their structural properties were characterized, and the proper assembly of the selected active subunits was confirmed. These subunits were integrated into the structural walls of the materials to impart intrinsic reactivity in different applications, with heterogeneous catalysis being the primary focus. The reactivity of these materials was evaluated by considering the active subunits present in their structure and the reaction mechanisms in organic transformation processes, which are of great industrial interest. Finally, a platform for the post-synthetic modification of COP-type materials was established to selectively adjust their chemical properties and thereby tailor their affinity for specific compounds. More specifically, Chapter 3 studied the esterification of carboxylic acids, which allows their conversion into esters, more versatile functional groups. This transformation was approached from the perspective of heterogeneous catalysis using COPs based on sulfur-containing subunits: SOP-1 - SOP-4. The most efficient catalyst for carboxylic acid esterification was SOP-1, which proved to be stable during the reaction and easily recyclable. Additionally, the reaction mechanism for the esterification of carboxylic acids, such as levulinic acid with ethanol, was catalyzed by SOP-1, and kinetic analysis was conducted, revealing a pseudo-first-order trend. In Chapter 4, the photooxidative coupling reaction of primary amines, such as benzylamine, was investigated using COP-type materials based on triazine and thiophene subunits obtained through solvothermal synthesis. This procedure is applicable to a wide range of substrates, such as aromatic sulfides, which are highly demanded in today's pharmaceutical industry. Finally, Chapter 5 addresses the development of new post-synthesis modification methodologies for the functionalization of COPs with enhanced catalytic properties. For this purpose, the COP-type material TAPB-OMePDA, based on structural units of 1,3,5-tris(4-aminophenyl)benzene and 2,5-dimethoxy-p-phenylenedialdehyde, was selected as the starting material. Through the Diels-Alder reaction or the Povarov reaction, active organic compounds were incorporated into the pores of the material. Specifically, functionalizations with aldehyde or imidazole groups will serve as suitable precursors to fine-tune and improve the existing properties of COPs, particularly in the areas of catalysis, ion exchange, and selective gas adsorption., Quiero expresar mi profundo agradecimiento al Instituto de Tecnología Química (ITQ-UPV-CSIC) por proporcionarme los recursos necesarios para llevar a cabo esta investigación. Agradezco especialmente el apoyo financiero otorgado por el Ministerio de Ciencia, Innovación y Universidades, a través del contrato predoctoral para la formación de doctores/as (PRE2018-084071), así como la financiación de los proyectos de investigación PID2020-112590GB-C21, CEX2021-001230-S, y el apoyo adicional de la Unión Europea a través del programa NextGeneration (PRTR-C17.I1) y de la Generalitat Valenciana (MFA/2022/003). Sin estas contribuciones, el desarrollo de esta tesis doctoral no habría sido posible.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed Matrix Membranes Containing a Biphenyl-Based Knitting Aryl Polymer and Gas Separation Performance

  • Martinez-Tirado, Raquel
  • Yuriychuk, Nastasia
  • López-González, Mar
  • Iglesias, Marta
  • Maya, Eva M.
Novel mixed matrix membranes (MMMs) were prepared using Matrimid (M), polysulfone (PSF) or polyphenylene oxide (PPO) as the continuous phase and a porous biphenyl-based knitting aryl polymer as a filler, synthesized through the Friedel–Craft reaction. The filler had little influence on the thermal and morphological properties of the membranes but affected the mechanical and gas transport properties, which were different depending on the type of matrix. Thus, in the case of MMMs based on Matrimid, the filler increased considerably the permeability to all gases, although no improvements in selectivity were achieved. A PSF-based MMM showed minor permeability increases, but not in all gases, while the selectivity was particularly improved for hydrogen separations. A PPO-based MMM did not exhibit variation in permeability nor in permselectivity with the addition of the filler., This research was funded by Ministerio de Ciencia e Innovación through the projects MAT2017-82288-C2-2-P, PID2020-112590GB-C22 and PID2019-108552GB-100 projects for financial support, and the Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the project PGC2018-095364-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phenyl Extended Naphthalene-Based Covalent Triazine Frameworks as Versatile Metal- Free Heterogeneous Photocatalysts

  • Fuerte-Díez, Beatriz
  • Valverde-Gónzález, Antonio
  • Pintado-Sierra, Mercedes
  • Díaz Morales, Urbano
  • Sánchez, Félix
  • Maya, Eva M.
  • Iglesias, Marta
[EN] Two new covalent triazines frameworks (CTFs) containing phenyl extended naphthalene units (with and without methoxy groups in the naphthalene core) are prepared by thermal and microwave activation. Both procedures yield similar chemical structure combining triazine acceptor units with donor aromatic groups, but they generate some differences in the morphology, structural organization, CO2 adsorption capacity, thermal and optical properties. Besides, the methoxy groups of the naphthalene core have also influence in some of these properties. The resulting phenyl extended naphthalene CTFs were efficiently utilized as metalfree heterogeneous photocatalyst for the selective aerobic oxidation of sulfides and the dehydrogenative cross-coupling reactions under visible-light irradiation, showing a high chemical stability., MAT2017-82288-C2-2-P and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. A.V.G. thanks Ministerio de Universidades for FPU17/03463., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solventless esterification of glycerol with p-methoxycinnamic acid catalyzed by a novel sulfonic acid mesoporous solid: Reaction kinetics

  • Molinero, L.
  • Esteban, J.
  • Sánchez, Félix
  • García-Ochoa, Félix
  • Ladero, M.
As a way to valorise glycerol, the main by-product of biodiesel, this study is focused on the production of esters of p-methoxycinnamic acid and glycerol. These esters can replace hazardous octylmethoxycinnamate in the cosmetic industry, which is thought to act as an endocrine disruptor and can interfere with thyroid function. Several sulfonated mesoporous catalysts, with and without endcapping, were easily synthetized using several alcohols as porogens. These catalysts were characterized for structure and surface area, chemical composition and acidity, and tested under solventless conditions for the esterification of glycerol with p-methoxycinnamic acid. Their activity was similar to that of p-toluenesulfonic acid. The best catalysts for the reaction under study was the end-capped mesoporous solid prepared in isopropanol. Finally, the selected catalyst was tested in 9 runs conducted at 150–170 °C and at molar ratios glycerol:p-methoxycinnamic acid ranging from 3:1 to 9:1. The kinetic model that better fits to the experimental data comprises two esterification reactions in-series and a first-order catalyst deactivation. The activation energies were 87.33 ± 5.67 kJ mol for the average esterification to the monoglycerides, 69.17 ± 9.84 kJ mol in average for the reactions yielding the diglycerides, and 104.00 ± 15.30 kJ mol for the catalyst deactivation., Financial support from the Spanish Ministry of Science and Innovation (Projects CTQ2010-15460, CTQ2017-84963-C2-1-R, MAT2017-82288-C2-2-P and PID2020-112590GB-C22) is grate- fully acknowledged. The authors want to show gratitude to the technical staff of the NMR, microanalysis and X-ray diffractometry Central Research Facilities (CAIs) of the Complutense University of Madrid (UCM) for the preparation of samples and analysis. Also, we want to acknowledge the valuable discussions with Dr. Elena de la Fuente of the Department of Chemical Engineering and Materials of UCM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the spectroscopy and dynamics of a proton-transfer dye by functionalizing with phenyl groups

  • Gutierrez, Mario
  • García, Eduardo
  • Monterde, Cristina
  • Sánchez, Félix
  • Douhal, Abderrazzak
Molecules undergoing excited-state proton transfer (ESPT) reactions are among the most interesting systems from spectroscopic and photophysical viewpoints. These molecules can be further functionalized with electron donating or accepting groups, inducing intramolecular charge transfer (ICT) events, which might be coupled to the ESIPT ones, conferring them with different spectroscopic and photophysical properties, which can be essential to implement the related materials in many key scientific and technological fields. Here, we report new benzimidazole derivatives that are functionalized with a phenyl group, 2-(5,10-diphenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenol (DP-HPPI), and its methylated equivalent, 2-(2-methoxyphenyl)-5,10-diphenyl-1H-phenanthro[9,10-d]imidazole (DP-MPPI). The results prove that these molecules in solutions undergo an ultrafast ICT (400-700 fs) reaction. Additionally, DP-HPPI also undergoes a reversible ESIPT process in dichloromethane. However, this is precluded in acetonitrile due to the involvement of intermolecular H-bonds in this solvent. These results provide key insights into the development of proton-transfer materials with bespoke spectral and photodynamical properties., This research was supported by grants: PID2020-116519RB-I00, MAT2017-82288-C2-2-P, and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union (EU); SBPLY/19/180501/000212 funded by JCCM and by the EU through ‘‘Fondo Europeo de Desarollo Regional’’ (FEDER); and 2020-GRIN-28929 funded by UCLM (FEDER). M. G. also thanks the EU for financial support through Fondo Social Europeo Plus (FSE+).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the spectroscopy and dynamics of a proton-transfer dye by functionalizing with phenyl groups

  • Gutierrez, Mario
  • García, Eduardo
  • Monterde, Cristina
  • Sánchez, Félix
  • Douhal, Abderrazzak
Molecules undergoing excited-state proton transfer (ESPT) reactions are among the most interesting systems from spectroscopic and photophysical viewpoints. These molecules can be further functionalized with electron donating or accepting groups, inducing intramolecular charge transfer (ICT) events, which might be coupled to the ESIPT ones, conferring them with different spectroscopic and photophysical properties, which can be essential to implement the related materials in many key scientific and technological fields. Here, we report new benzimidazole derivatives that are functionalized with a phenyl group, 2-(5,10-diphenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenol (DP-HPPI), and its methylated equivalent, 2-(2-methoxyphenyl)-5,10-diphenyl-1H-phenanthro[9,10-d]imidazole (DP-MPPI). The results prove that these molecules in solutions undergo an ultrafast ICT (400-700 fs) reaction. Additionally, DP-HPPI also undergoes a reversible ESIPT process in dichloromethane. However, this is precluded in acetonitrile due to the involvement of intermolecular H-bonds in this solvent. These results provide key insights into the development of proton-transfer materials with bespoke spectral and photodynamical properties., This research was supported by grants: PID2020-116519RB-I00, MAT2017-82288-C2-2-P, and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union (EU); SBPLY/19/180501/000212 funded by JCCM and by the EU through ‘‘Fondo Europeo de Desarollo Regional’’ (FEDER); and 2020-GRIN-28929 funded by UCLM (FEDER). M. G. also thanks the EU for financial support through Fondo Social Europeo Plus (FSE+).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous aromatic frameworks containing binaphthyl-dihydroazepine units (cBAPAFs) as catalytic supports for asymmetric reactions

  • Valverde-Gónzález, Antonio
  • Fernández-Seriñan, P.
  • Matarín, Ángela
  • Arnanz, Avelina
  • Sánchez, F.
  • Iglesias, Marta
We present the successfully synthesis of a series of chiral polymeric aromatic frameworks containing novel enantiopure atropoisomeric 1,1′-binaphthyl-dihydroazepine-based compounds as structural building units named cBAPAFs. Three porous materials with amino, pyridinic and amino-alcohol functionalities were successfully obtained from dibrominated monomers by Suzuki-Miyaura couplings. New porous materials present surface areas up to 619 m g determined by Brunauer–Emmett–Teller (BET), and high thermal stability. The use of nitrogen-based structural units provides useful functional groups to allow a robust binding site for metal complexes. Thus, after post-synthetic metalation with Cu(OAc), these materials have been applied as efficient heterogenized catalysts for the nitroaldol (Henry) reaction and a multicomponent reaction, affording chiral products with comparable enantioselectivity to that of the homogeneous system. The materials were also tested as organocatalysts for the asymmetric addition of diethylzinc to benzaldehyde and the reaction between nitro-styrene and nitroethane. These cBAPAFs could be recycled for the asymmetric nitroaldol reaction for at least 5 cycles without a significant loss in its catalytic efficiency., Authors acknowledge to Grants PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe”. A.V.G. thanks Ministerio de Universidades for FPU17/03463.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phenyl Extended Naphthalene-Based Covalent Triazine Frameworks as Versatile Metal-Free Heterogeneous Photocatalysts

  • Fuerte-Díez, Beatriz
  • Valverde-Gónzález, Antonio
  • Pintado-Sierra, Mercedes
  • Díaz Morales, Urbano
  • Sánchez, Félix
  • Maya, Eva M.
  • Iglesias, Marta
Two new covalent triazines frameworks (CTFs) containing phenyl extended naphthalene units (with and without methoxy groups in the naphthalene core) are prepared by thermal and microwave activation. Both procedures yield similar chemical structures combining triazine acceptor units with donor aromatic groups, but they generate some differences in the morphology, structural organization, CO adsorption capacity, and thermal and optical properties. Besides, the methoxy groups of the naphthalene core have also influence in some of these properties. The resulting phenyl extended naphthalene CTFs are efficiently utilized as metal-free heterogeneous photocatalyst for the selective aerobic oxidation of sulfides and the dehydrogenative cross-coupling reactions under visible-light irradiation, showing a high chemical stability., The authors acknowledge grants MAT2017-82288-C2-2-P and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by“ERDF A way of making Europe”. A.V.G. thanks Ministerio de Universidades for FPU17/03463
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

BINOL-Containing Chiral Porous Polymers as Platforms for Enantiorecognition

  • Valverde-Gónzález, Antonio
  • Borrallo-Aniceto, M. Carmen
  • Pintado-Sierra, Mercedes
  • Sánchez, Félix
  • Arnanz, Avelina
  • Boronat, Mercedes
  • Iglesias, Marta
The enantioselective discrimination of racemic compounds can be achieved through the design and preparation of a new family of chiral conjugated BINOL-porous polymers (CBPPs) from enantiopure (R)- or (S)-BINOL derivatives and 1,3,5-tris(4-phenylboronic acid)benzene or 1,3,5-tris(4-ethynylphenyl)benzene, 1,3,5-triethynyl-2,4,6-trifluorobenzene, and tetra(4-ethynylphenyl)methane as comonomers following Suzuki-Miyaura and Sonogashira-Hagihara carbon-carbon coupling approaches. The obtained CBPPs show high thermal stability, a good specific surface area, and a robust framework and can be applied successfully in the fluorescence recognition of enantiomers of terpenes (limonene and α-pinene) and 1-phenylethylamine. Fluorescence titration of CBPPs-OH in acetonitrile shows that all Sonogashira hosts exhibit a preference for the (R)-enantiomer over the (S)-enantiomer of 1-phenylethylamine, the selectivity being much higher than that of the corresponding BINOL-based soluble system used as a reference. However, the Suzuki host reveals a preference toward (S)-phenylethylamine. Regarding the sensing of terpenes, only Sonogashira hosts show enantiodifferentiation with an almost total preference for the (S)-enantiomer of limonene and α-pinene. Based on the computational simulations and the experimental data, with 1-phenylethylamine as the analyte, chiral recognition is due to the distinctive binding affinities resulting from N···H-O hydrogen bonds and the π-πinteraction between the host and the guest. However, for limonene, the geometry of the adsorption complex is mostly governed by the interaction between the hydroxyl group of the BINOL unit and the C═C bond of the iso-propenyl fragment. The synthetic strategy used to prepare CBPPs opens many possibilities to place chiral centers such as BINOL in porous polymers for different chiral applications such as enantiomer recognition., Authors acknowledge Grants PID2020-112590GB-C22 and PID2020-112590GB-C21 funded by MCIN/AEI/10.13039/501100011033. A.V.G. thanks Ministerio de Universidades for FPU17/03463., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling the complex photodynamics of mixed-linker Zr-MOFs - efficient energy and charge transfer processes

  • Gutierrez, Mario
  • Di Nunzio, Maria Rosaria
  • Caballero-Mancebo, Elena
  • Sánchez, Félix
  • Cohen, Boiko
  • Douhal, Abderrazzak
Controlling the composition, as well as the number and type of defects in metal-organic frameworks (MOFs) helps in the understanding of the interactions that govern their behaviours, and in consequence, their potential employment in a number of photonic applications. In this work, we report on the spectroscopy and photodynamics of two heterolinker (naphthalene-2,6-dicarboxylic acid, NDC, and 4-amino-8-cyanonaphthalene-2,6-dicarboxylic acid, NACDC) Zr-based MOFs that differ in the modulator used during the synthesis, thus leading to possible defects in the frameworks. We observed an inter-particle energy transfer (ET) that occurs from <10 to 160 ps in competition with an ultrafast intra-particle ET event from excited NDC to NACDC. In addition, due to the heterogeneity of the system, we found two different populations of the push-pull NACDC linker emitting from the charge transfer (CT) state. Single crystal fluorescence microscopy experiments further demostrated that the photobehavior of the studied MOFs is dominated by NACDC. Nanosecond (ns)-flash photolysis also revealed different photobehaviours related to the presence of defects, while the femtosecond (fs)-dynamics is independent of the modulators used for the MOFs’ synthesis. These results may help in engineering of MOFs for their application in photon-based science and technology and may lead to the construction of optoelectronic devices and better photocatalysts based on these materials., This research was supported by grants: PID2020-116519RB-I00, and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union (EU); SBPLY/19/ 180501/000212 and SBPLY/21/180501/000108 funded by JCCM and by the EU through ‘‘Fondo Europeo de Desarollo Regional’’ (FEDER); and 2020-GRIN-28929 funded by UCLM (FEDER). We thank the Servicio de Instrumentación(IRICA) for the PXRD measurements and the Servicio Interdepartamental de Investiga- ción (SIdI) of the Universidad Autónoma de Madrid (UAM) for the elemental analysis of the studied ZrMOFs
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Framework Adaptability and Concerted Structural Response in a Bismuth Metal-Organic Framework Catalyst.

  • Gómez-Oliveira, Eloy P.
  • Reinares-Fisac, Daniel
  • Aguirre-Díaz, Lina María
  • Esteban-Betegón, Fátima
  • Gutiérrez-Puebla, Enrique
  • Iglesias, Marta
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
  • Pintado-Sierra, Mercedes
Bismuth metal–organic frameworks (MOFs) as heterogeneous catalysts are scarce, and there is little knowledge on the influence of the MOF features on their resulting activity and behavior. Here, we present the synthesis, characterization, and catalytic activity in the one-pot multicomponent Strecker reaction with ketones of three new MOFs prepared with the combination of indium or bismuth and 4,4′,4′′,4′′′-methanetetrayltetrabenzoic acid. One of them, denoted BiPF-7, is very robust and chemically stable, and demonstrates a high activity in the formation of the desired α-aminonitriles. The interaction of the catalytic substrates with the metal centers in this MOF has been crystallographically characterized, showcasing a concerted framework adaptability process that involves structural changes in framework components that are not directly involved in the binding of the guests., Grant CTQ-2017-87262-R funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Grants PID2019-107675-RB-I00 and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033. Grant PLEC2021-007906 (SOLFuture) funded by MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid Photocatalyst for Hydrogen Production: The Effect of Fluorine on Optoelectronic Properties of Conjugated Porous Polymers

  • Gómez-Mendoza, Miguel
  • Pintado-Sierra, Mercedes
  • Monterde, Cristina
  • Barawi, Mariam
  • Sánchez, Félix
  • Iglesias, Marta
  • Peña O'Shea, Víctor A. de la
  • Liras, Marta
Phenanthrenequinone (PhQ) based Conjugated Porous Polymers (CPPs) are synthetized without and with the presence of fluorine atoms in the trisubstituted core benzene unit (CPP-FPA and CPP-PA). Furthermore, organic-inorganic hybrid heterojunctions based on these CPPs and TiO as inorganic semiconductor are prepared (CPP-FPA@T-10 and CPP-PA@T-10, with the polymer loading ≈10 wt.%). The photonic efficiency for H photoproduction is 33% higher when the CPP has fluorine atoms. This enhancement is even higher in presence of 1 wt.% platinum as co-catalyst. Thus, the Pt/CPP-FPA@T-10 hybrid (≈31.7 mmol g h and 11.7% of photonic efficiency) presents H production nearly twice than that of the nonfluorinated hybrid Pt/CPP-PA@T-10 (≈16.6 mmol g h and 6.1% of photonic efficiency) and 3.5-times higher than that of the Pt/TiO (≈8.9 mmol g h and 3.29% of photonic efficiency) photocatalyst. Charge dynamics studies show that both hybrid heterojunctions exhibit a direct Z-scheme charge transfer mechanism, and the presence of fluorine atoms in the CPP structure leads to an increasing charge separation lifetime which is in accordance with the better performance in H production. These findings on fluorine doping provide essential clues for the design of structure electronic engineered CPPs for energy conversion and storage technologies., This work has received financial support from AEI/MICINN/10.13039/501100011033 and FEDER, UE through the PID2019-106315RB-I00, PID2020-118593RB-C22, and PID2020-112590GB-C22 projects. Grant PLEC2021-007906 (SOLFuture) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRT. Also, this work has been funded by the regional government of Comunidad de Madrid and European Structural Funds through their financial support to FotoArt-CM project (S2018/NMT-4367). Besides, Fundación Ramon Areces funded this work through ArtLeaf project. M. Liras and M. Barawi thank to MCIN/ AEI/10.13039/501100011033 and European Social Fund for Ramón y Cajal (RyC-2015-18677) and Juan de la Cierva Incorporación (IJC2019-042430-I) grants, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrogen-rich cobalt (II) MOFs as efficient bifunctional catalysts for single or tandem oxidation and CO2conversion reactions

  • Valverde-Gónzález, Antonio
  • Borrallo-Aniceto, M. Carmen
  • Díaz Morales, Urbano
  • Maya, Eva M.
  • Gándara Barragán, Felipe
  • Sánchez, Félix
  • Iglesias, Marta
The development of efficient catalysts that include the advantages of homogeneous and heterogeneous catalysts is a challenge that can be achieved with metal-organic frameworks (MOFs) since they can incorporate different functionalities in their structure that make them promising catalysts for different processes. Herein, two new isoreticular nitrogen-rich naphthalene cobalt-MOFs, Co-NDTz and Co-NDPhTz, were successfully prepared under solvothermal conditions from the corresponding linkers (H2NDTz=2,6-naphthaleneditetrazole and H2NDPhTz=2,6-bis(4-(1H-tetrazol-5-yl)phenyl)naphthalene). These Co-tetrazole-based MOFs combine Lewis acid and redox functionalities and good CO2 adsorption and after being thermally activated resulted to be excellent efficient catalysts for the epoxidation of alkenes and CO2 cycloaddition to epoxides yielding cyclic carbonates, reaching turnover numbers up to 2500. Furthermore, these two reactions take place following a highly desired one-pot tandem process and a cyclic carbonate was obtained from styrene and CO2 under solvent-free conditions. In addition, the heterogeneous catalysts are easily recycled without noticeable loss of catalytic activity and without important structural deterioration., Authors acknowledge to Grants PID2020-112590GB-C22 and PID2020-112590GB-C21 funded by MCIN/AEI/10.13039/501100011033. A.V.G. thanks for FPU17/03463.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-free redox-active diphenylpyrenediimides: A comparison between the photocatalytic performance of molecular and polymeric catalysts

  • Fuerte-Díez, Beatriz
  • Rangel-Rangel, E.
  • Sánchez, Félix
  • Monge, M. Ángeles
  • Gutiérrez-Puebla, E.
  • Valverde-Gónzález, Antonio
  • Maya, E. M.
  • Iglesias, M.
Herein we described a donor–acceptor porous conjugated polydiphenylpyreneimide (DPPy-PI) with high thermal stability (530 °C) and surface area of 710 m.g prepared by condensation of 3,8-diphenylpyrene-1,2,6,7-tetracarboxylic dianhydride (DPPyDA) and tris(4-aminophenyl)benzene and a series of pyrenediimides (DPPy-DIs) as molecular references for comparative purposes. To evaluate the effect of the photoactive pyrene unit the polydiphenylperyleneimide (DPP-PI) having perylene units was also prepared. DPPy-PI has shown to see an efficient metal-free heterogeneous photocatalyst in the selective oxidation of aromatic sulfides and for Diels-Alder cycloadditions reaching almost full conversions with low reaction times and high selectivity that can be reused for at least fifteen cycles without significant loss of catalytic activity. Characterization data reveals that imide radicals are the important active intermediates during the redox processes of these PIs., Authors acknowledge to Grants PID2020-112590GB-C22 and PID2019-107675RB-I00 funded by MCIN/AEI/10.13039/501100011033. We acknowledge Laura San Miguel for the first tests of catalytic activity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the potential of a covalent triazine framework based on [1]benzothieno[3,2-b][1]benzothiophene (DPhBTBT-CTF) as a metal-free heterogeneous photocatalyst

  • Borrallo-Aniceto, M. Carmen
  • Pintado-Sierra, Mercedes
  • Valverde-Gónzález, Antonio
  • Díaz, Urbano
  • Sánchez, Félix
  • Maya, Eva M.
  • Iglesias, Marta
The development of photocatalysts that are effective in different organic processes is a topic of great interest to researchers in materials chemistry. Herein, we report the design and synthesis of a new covalent triazine framework (CTF) built by acid-catalyzed trimerization of 4,4′-(benzo[b]benzo[4,5]thieno[2,3-d]thiophene-2,7-diyl)dibenzonitrile activated by microwaves that generates a new organic polymer, DPhBTBT-CTF. This CTF exhibits visible-light absorption due to the electron-donating BTBT units and the extended π-conjugated framework with the electron-acceptor triazine node and proves to be an efficient and versatile metal-free heterogeneous photocatalyst for different organic processes such as selective oxidations of both sulfides and benzyl alcohols to sulfoxides and benzaldehydes, respectively or the oxidative bromination of electron rich aromatic compounds. Moreover, two different proof of concept reactions were tested: the Diels-Alder cycloaddition and the hydroxylation of boronic acids. Heterogeneity studies confirmed that this photocatalyst can be recycled without significant loss of selectivity, and also some mechanistic tests suggested the preferred oxidation pathway., The authors acknowledge the grants PID2020-112590GB-C22 and PID2020-112590GB-C21 funded by MCIN/AEI/ 10.13039/501100011033. The authors also acknowledge Dr M Luisa Ferrer and Laura González for the electrochemical analysis, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Naphthalene Tetrazole-Based Nickel Metal-Organic Framework as a Filler of Polycarbonate Membranes to Improve CO2 and H2 Separation

  • Valverde-Gónzález, Antonio
  • Yuriychuk, Nastasiya
  • Borrallo-Aniceto, M. Carmen
  • Gándara Barragán, Felipe
  • Iglesias, Marta
  • López-González, Mar
  • Maya, Eva M.
A tetrazole-naphthalene linker was used to prepare a nickel MOF (metal-organic framework) (NiNDTz) with interesting properties: a specific surface area S of 320 mg (S 436 mg), high thermal stability (Td = 300 °C), and CO uptake of 1.85 mmolg, attributed to the tetrazole groups to be used as fillers in gas separation membranes. The role of these groups was crucial in the mechanical properties of mixed membranes prepared using polycarbonate as a polymer matrix, providing a very homogeneous filler distribution and also in the gas separation properties since a simultaneous increase in permeability and selectivity was achieved, especially in the hybrid membrane containing 20% filler (PC@NiNDTz-20%). This membrane exhibited an excellent balance between permeability (P) and selectivity (α) with an increase in the permeability of CO and H, 177 and 185%, respectively, and improvements in the selectivity of these gases against greenhouse gases such as methane and ethylene (between 15 and 28% improvement). These results make this membrane competitive to deal with separations in which these gases are involved, and are of special interest for the H/CH separation since it clearly improves the performance of pure PC and no better PC-based membranes have been reported in the literature for this separation., The authors acknowledge grants PID2020-112590GB-C22funded by MCIN/AEI/10.13039/501100011033, and A.V.G.and Ministerio de Universidades for FPU17/03463. M.L.-G.gratefully acknowledges financial support provided by Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI), and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the ProjectPGC2018-095364−B-I00 and by Ministerio de Ciencia e Innovación and the CSIC, project PID2019-108552GB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single Site W(0) versus Re(I)-Dipyridophenazine- Based Conjugated Porous Polymer for CO2 Photoreduction

  • Matarín, Ángela
  • Sánchez, Félix
  • Collado, L.
  • Barawi, Mariam
  • de la Peña O'Shea, V. A.
  • Arnanz, A.
  • Liras, M.
  • Iglesias, Marta
Herein, the synthesis and characterization of two robust tungsten and rhenium carbonyl complexes integrated into an organic polymer (CPP-Re, CPP-W) are reported. These polymers are obtained by a Suzuki coupling reaction between the corresponding dibromo metal-carbonyl substituted dipyrido[3,2-a:2′,3′-c]phenazine complex and 1,3,5-triphenylbenzene-4′,4″,4″,4‴-triboronic acid and integrated catalytic active sites and photosensitizer since they have not only nitrogen sites to coordinate metal active centers as rhenium or tungsten but photoactive units with good charge-separating ability which can significantly improve the CO photoreduction reaction (COPRR). These polymers show similar activity in solid–gas COPRR in absence of sacrificial agents to produce syn gas (CO + H) but CPP-W selectivity to products change regarding CPP-Re being able to produce also large amount of more demanding electron products such as methane and ethane. Moreover, the single-site Re- or W-CPP catalysts could prevent the dimerization of complexes that produces its deactivation. This work shows the potential of CPPs as matrices to support single active centers for heterogeneous catalysis., This research was funded by MICINN/AEI/10.13039/501100011033 (PID2020-112590GB-C22, PID2020-118593RB-C22, PID2020-119125RJ- I00, PID2022-141688OB-I00). Additional funding has been received from the strategic research lines project SOL-Future (PLEC2021-0079069) and SolarChem 5.0 (TED2021-130173B-C41), funded by both MCIN/AEI/ 10.13039/501100011033 and NextGenerationEU/PRTR. M.B. thanks the RYC2022-038157-I grant funded by MCIN/AEI/10.13039/501100011033. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge the support of the staff at beamline B18 of the Diamond synchrotron where the XAS experiments were performed (experiment reference SP33476-2)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heterogeneous Iridium (III) conjugated porous polymer photoredox catalyst based on BODIPY

  • Naranjo, T.
  • Matarín, Ángela
  • Iglesias, Marta
  • de la Peña O’Shea, Víctor A.
  • Liras, M.
Herein, the design, synthesis and characterization of Iridium (III) complex integrated into the backbone of a nanostructure conjugated microporous polymer based on BODIPY, named as IEP-41 (IMDEA Energy Polymer), is reported. The insertion of the Iridium complex followed the deprotection strategy of BODIPY moiety, achieving (dipyrrin)(bipyridine)Ir(III) heterogeneous complex. IEP-41 is an efficient and selective photocatalyst for iminium ion generation under visible light. Moreover, IEP-41 shows a broad scope with different nucleophiles (nitroalkanes, nitriles, and dimethylmalonate) but does not show reaction in the presence of ketonic substrates. IEP-41 shows high thermal and photochemical stability under irradiation, and it could be reused until six times without efficiency and selectivity losses. © 2024 Elsevier B.V., This research was funded by MICINN/AEI/10.13039/501100011033 through PID2022-141688OB-I00, PID2020-112590 GB-C22 and PID2023-146114NB-C22 projects. Additional funding has been received from the strategic research lines project SOL-Future (PLEC2021-0079069) and SolarChem 5.0 (TED2021-130173B-C41), funded by both MCIN/AEI/ 10.13039/501100011033 and NextGenerationEU/PRTR. We acknowledge support from the Scientific Network FOTOCATÁLISIS funded by the Consejo Superior de Investigaciones Científicas (CSIC), Spain., Supplementary material, Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Hyper-Cross-Linked Porous Polymer Featuring B−N Covalent Bonds (HCP-BNs): A Stable and Efficient Metal-Free Heterogeneous Photocatalyst

  • Señorans Fernández, Sara
  • Valencia Nieto, Isabel|||0000-0002-8320-9963
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
  • Iglesias, Marta
  • Fernández Rodríguez, Manuel Ángel|||0000-0002-0120-5599
  • Maya, Eva M.
The first example of a porous polymer containing B-Ncovalentbonds, prepared from a tetraphene B-N monomer and biphenylas a comonomer, is reported. It was prepared using the solvent knittingstrategy, which allows the connection between the aromatic rings ofthe two monomers through methylene groups provided by an externalcross-linking agent. The new polymer exhibited micromeso porositywith an S (BET) of 612 m(2)/g, highthermal stability, and potential properties as a heterogeneous photocatalyst,since it is very active in the aza-Henry coupling reaction (>98%ofconversion and selectivity). After the first run, the catalyst improvesits photocatalytic activity, shortening the reaction time to only2 h and maintaining this activity in successive runs. The presenceof a radical in this structure that remains stable with successiveruns makes it a new type of material with potential applications asa highly stable and efficient photocatalyst., Ministerio de Ciencia e Innovación, Comunidad de Madrid