Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A polyrotaxanated covalent organic network based on viologen and cucurbit[7]uril

  • Das, Gobinda
  • Sharma, Sudhir Kumar
  • Prakasam, Thirumurugan
  • Gándara Barragán, Felipe
  • Mathew, Renny
  • Alkhatib, Nour
  • Saleh, Na’il
  • Pasricha, Renu
  • Olsen, John-Carl
  • Baias, Maria
  • Kirmizialtin, Serdal
  • Jagannathan, Ramesh
  • Trabolsi, Ali
[EN] Since their initial presentation in 2005 by Yaghi and co-workers, covalent organic frameworks (COFs) have been the focus of much development. Here we introduce mechanical bonds into COFs by employing a method that involves supramolecular self-assembly, dynamic imine-bond formation, and liquid-liquid interfacial condensation and produces a continuous 2D polyrotaxaneted film. A diamino-viologen linker is complexed with the macrocycle cucurbit[7]uril (CB[7]) to form pseudorotaxanes that then condense with an aromatic tri-aldehyde core at the interface of two solvents. The unrotaxanated COF is prepared by condensing the viologen and the trialdehyde in the absence of CB[7], and the chemical and physical properties of the formed films are compared. The CB[7]–encapsulated film is mechanically and thermally more robust and more luminescent. The synthetic strategy presented here allows the incorporation of mechanically interlocked molecules (MIMs) into polymeric materials and provides access to materials that have properties and functionalities that are yet to be explored., Spanish Ministry of Economy and Competitiveness for funding through the “Ramón y Cajal” and “Retos de la Sociedad (CTQ2017–87262-R)” programs
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encoding Metal-Cation Arrangements in Metal-Organic Frameworks for Programming the Composition of Electrocatalytically Active Multimetal Oxides

  • Castillo-Blas, Celia
  • López-Salas, Nieves
  • Gutiérrez, María C.
  • Puente-Orench, Inés
  • Gutiérrez-Puebla, Enrique
  • Ferrer, M. Luisa
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
[EN] In the present contribution, we report how through the use of metal-organic frameworks (MOFs) composed of addressable combinations of up to four different metal elements it is possible to program the composition of multimetal oxides, which are not attainable by other synthetic methodologies. Thus, due to the ability to distribute multiple metal cations at specific locations in the MOF secondary building units it is possible to code and transfer selected metal ratios to multimetal oxides with novel, desired compositions through a simple calcination process. The demonstration of an enhancement in the electrocatalytic activity of new oxides by preadjusting the metal ratios is here reported for the oxygen reduction reaction, for which activity values comparable to commercial Pt/C catalysts are reached, while showing long stability and methanol tolerance., We acknowledge Institut Laue-Langevin and Spanish Initiatives on Neutron Scattering (ILL-SpINS) for beamtime at instrument D1B and G. Cuello for assistance during data acquisition. The Paul Scherrer Institute is also acknowledged for beamtime at instrument HRPT and V. Pomjakhusin for assistance during data acquisition. We thank E. Rodríguez-Cañas and Isidoro Poveda from the Servicio Interdepartamental de Investigación at Universidad Autónoma de Madrid for valuable support with SEM images and EDS analyses and FE-SEM image acquisition, respectively. We acknowledge E. Urones for the TEM images and TEM-EDS analysis acquisition at Centro Nacional de Microscopía Electrónica. Funding: Work at Instituto de Ciencia de Materiales de Madrid−Consejo Superior de Investigaciones Cientifícas (CSIC) has been supported by the Spanish Ministry for Science, Innovation and Universities (MINECO), and FEDER funds: Projects MAT2016-78465-R, MAT2015-68639-R, and CTQ2017-87262-R. F.G. and N.L.-S. acknowledge financial support from MINECO (Ramón y Cajal program and FPI research contract, respectively).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fundamental Insights into Photoelectrocatalytic Hydrogen Production with a Hole-Transport Bismuth Metal–Organic Framework

  • García-Sánchez, Alba
  • Gómez-Mendoza, Miguel
  • Barawi, Mariam
  • Villar-Garcia, Ignacio J.
  • Liras, Marta
  • Gándara Barragán, Felipe
  • Peña O'Shea, Víctor A. de la
[EN] Solar fuels production is a cornerstone in the development of emerging sustainable energy conversion and storage technologies. Light-induced H2 production from water represents one of the most crucial challenges to produce renewable fuel. Metalorganic frameworks (MOFs) are being investigated in this process, due to the ability to assemble new structures with the use of suitable photoactive building blocks. However, the identification of the reaction intermediates remains elusive, having negative impacts in the design of more efficient materials. Here, we report the synthesis and characterization of a new MOF prepared with the use of bismuth and dithieno[3,2-b:2',3'-d]thiophene-2,6-dicarboxylic acid (DTTDC), an electron-rich linker with hole transport ability. By combining theoretical studies and time-resolved spectroscopies, such as core hole clock and laser flash photolysis measurements, we have completed a comprehensive study at different time scales (fs to-ms) to determine the effect of competitive reactions on the overall H2 production. We detect the formation of an intermediate radical anion upon reaction of photogenerated holes withan electron donor, which plays a key role in the photoelectrocatalytic processes. These results shed new light on the use of MOFs for solar fuel production., This work was supported by the EU (ERC CoG HyMAP 648319) and Spanish MCIU, Ra-Phuel (ENE2016-79608-C2-1-R), SOLPAC (ENE2017-89170-R) FOTOFUEL (ENE2016-82025-REDT) and CTQ2017-87262-R (MCIU/AEI/FEDER, UE). We thank "Comunidad de Madrid" and European Structural Funds for their financial support to FotoArt-CM project (S2018/NMT-4367). F.G., M. L and M. B thank to MINECO and European Social Fund for a Ramón y Cajal contract (RyC-2015-18384, RyC-2015-18677) and Juan de la Cierva Formación contract (FJCI-2016-30567), respectively. We thank Diamond Facilities for the access to synchrotron radiation and CESCA for computational resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly efficient multi-metal catalysts for carbon dioxide reduction prepared from atomically sequenced metal organic frameworks

  • Castillo-Blas, Cecilia
  • Álvarez Galván, María Consuelo
  • Puente-Orench, Inés
  • García-Sánchez, Alba
  • Oropeza, Freddy E.
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
  • Peña O'Shea, Víctor A. de la
  • Gándara Barragán, Felipe
The precise control on the combination of multiple metal atoms in the structure of metal-organic frameworks (MOFs) endowed by reticular chemistry, allows the obtaining of materials with compositions that are programmed for achieving enhanced reactivity. The present work illustrates how through the transformation of MOFs with desired arrangements of metal cations, multi-metal spinel oxides with precise compositions can be obtained, and used as catalyst precursor for the reverse water-gas shift reaction. The differences in the spinel initial composition and structure, determined by neutron powder diffraction, influence the overall catalytic activity with changes in the process of in situ formation of active, metal-oxide supported metal nanoparticles, which have been monitored and characterized with in situ X-ray diffraction and photoelectron spectroscopy studies., Work at Instituto de Ciencia de Materiales de Madrid–Consejo Superior de Instigaciones Científicas (CSIC) has been supported by the Spanish Research Agency (Agencia Estatal de Investigación, AEI), Projects MAT2016-78465-R and CTQ2017-87262-R. This work was supported by the EU (ERC CoG HyMAP 648319) and Spanish MINECO (ENE2016-79608-C2-1-R). Authors also wish to thank to “Comunidad de Madrid” and European Structural Funds for their financial support to FotoArt-CM project (S2018/NMT-4367). F. G. acknowledges financial support from MINECO Ramón y Cajal program (RyC-2015-18384)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anionic and neutral 2D indium metal-organic frameworks as catalysts for the Ugi one-pot multicomponent reaction

  • Reinares-Fisac, Daniel
  • Aguirre-Díaz, Lina María
  • Iglesias, Marta
  • Gutiérrez-Puebla, Enrique
  • Gándara Barragán, Felipe
  • Monge, M. Ángeles
Two metal–organic frameworks (MOFs) made of indium and 1,3,5-tris(4-carboxyphenyl)benzene (H3btb) and having a layered structure have been synthesized under solvothermal conditions: [In(btb)(H2O)(DMF)]·L (InPF-50) and [In2(btb)2Cl2]2−·[(CH3)2NH2]22+·L (InPF-51). The structures of both materials have been determined by single crystal X-ray diffraction. The synthetic study which has been carried out demonstrates the influence of the selected indium salt in obtaining each MOF. The structure of both materials consists of pairs of catenated layers, where the metal atoms display coordinated solvent ligands that provide potential open metal sites. The accessibility to these sites along with the presence of Lewis basic sites in the form of uncoordinated oxygen atoms make InPF-50 and -51 efficient catalysts for the four-component Ugi reaction. We attribute this high activity not only to the presence of both acid and basic sites, but also to their convenient locations in the MOF structures. This is further supported by the comparison with [In3O(btb)2(HCO2)]·L, InPF-110, a highly porous indium MOF that only displays Lewis acid sites, and shows lower activity., This work has been supported by the Spanish Ministry of Ministry of Science, Innovation and Universities Project MAT2016-78465-R, MAT2017-82288-C2-2-P, and CTQ2017-87262-R. D. R.-F. acknowledges an FPU scholarship from the Spanish Ministry of Science, Innovation and Universities. F. G. acknowledges the Spanish Ministry for Science, Innovation and Universities, for funding through the “Ramón y Cajal” program., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Steric hindrance in metal coordination drives the separation of pyridine regioisomers using rhodium(II)-based metal–organic polyhedra

  • Hernández-López, Laura
  • Martínez Esaín, Jordi
  • Carné-Sánchez, Arnau
  • Grancha, Thais
  • Faraudo, Jordi
  • Maspoch, Daniel
The physicochemical similarity of isomers makes their chemical separation through conventional techniques energy intensive. Herein, we report that, instead of using traditional encapsulation‐driven processes, steric hindrance in metal coordination on the outer surface of RhII‐based metal–organic polyhedra (Rh‐MOPs) can be used to separate pyridine‐based regioisomers via liquid–liquid extraction. Through molecular dynamics simulations and wet experiments, we discovered that the capacity of pyridines to coordinatively bind to Rh‐MOPs is determined by the positions of the pyridine substituents relative to the pyridine nitrogen and is influenced by steric hindrance. Thus, we exploited the differential solubility of bound and non‐bound pyridine regioisomers to engineer liquid–liquid self‐sorting systems. As a proof of concept, we separated four different equimolecular mixtures of regioisomers, including a mixture of the industrially relevant compounds 2‐chloropyridine and 3‐chloropyridine, isolating highly pure compounds in all cases., This work was supported by the Spanish MINECO (project RTI2018‐095622‐B‐I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (Grant No. SEV‐2017‐0706). A.C.S. and T.G. thank the Spanish MINECO for Juan de la Cierva fellowships (IJCI‐2016–29802 and FJCI‐2017–31598). L.H. acknowledges the support from the Spanish State Research Agency (PRE2019‐088056). J.F.G. acknowledges funding from the Spanish Research Agency (AEI, CTQ2017‐87262‐R, EUR2019‐103824). The project that generated these results received support from a fellowship (LCF/BQ/PR20/11770011) of the “la Caixa” Foundation (ID 100010434). We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae II., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of polycarboxylate rhodium(II) Metal–Organic Polyhedra (MOPs) and their use as building blocks for highly connected Metal–Organic Frameworks (MOFs)

  • Grancha, Thais
  • Carné-Sánchez, Arnau
  • Zarekarizi, Farnoosh
  • Hernández-López, Laura
  • Albalad, Jorge
  • Khobotov-Bakishev, Akim
  • Guillerm, Vincent
  • Morsali, Ali
  • Juanhuix, Judith
  • Gándara Barragán, Felipe
  • Imaz, Inhar
  • Maspoch, Daniel
Use of preformed metal-organic polyhedra (MOPs) as supermolecular building blocks (SBBs) for the synthesis of metal-organic frameworks (MOFs) remains underexplored due to lack of robust functionalized MOPs. Herein we report the use of polycarboxylate cuboctahedral RhII-MOPs for constructing highly-connected MOFs. Cuboctahedral MOPs were functionalized with carboxylic acid groups on their 12 vertices or 24 edges through coordinative or covalent post-synthetic routes, respectively. We then used each isolated polycarboxylate RhII-MOP as 12-c cuboctahedral or 24-c rhombicuboctahedral SBBs that, upon linkage with metallic secondary building units (SBUs), afford bimetallic highly-connected MOFs. The assembly of a pre-synthesized 12-c SBB with a 4-c paddle-wheel SBU, and a 24-c SBB with a 3-c triangular CuII SBU gave rise to bimetallic MOFs having ftw (4,12)-c or rht (3,24)-c topologies, respectively., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Pro-gram/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). A.C.S. and T.G. thank the Spanish MINECO for Juan de la Cierva fellowships (IJCI-2016-29802 and FJCI-2017-31598). F.G. acknowledges funding from the Spanish Research Agency (AEI, CTQ2017-87262-R, EUR2019-103824). The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the synthesis and crystallization processes on the cation distribution in a series of multivariate rare-earth metal-organic frameworks and their magnetic characterization

  • Loredana Vasile, Raluca
  • Godoy, Agustín A.
  • Puente-Orench, Inés
  • Nemes, N. M.
  • Peña O'Shea, Víctor A. de la
  • Gutiérrez-Puebla, Enrique
  • Martínez, J. L.
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
The incorporation of multiple metal atoms in multivariate metal–organic frameworks is typically carried out through a one-pot synthesis procedure that involves the simultaneous reaction of the selected elements with the organic linkers. In order to attain control over the distribution of the elements and to be able to produce materials with controllable metal combinations, it is required to understand the synthetic and crystallization processes. In this work, we have completed a study with the RPF-4 MOF family, which is made of various rare-earth elements, to investigate and determine how the different initial combinations of metal cations result in different atomic distributions in the obtained materials. Thus, we have found that for equimolar combinations involving lanthanum and another rare-earth element, such as ytterbium, gadolinium, or dysprosium, a compositional segregation takes place in the products, resulting in crystals with different compositions. On the contrary, binary combinations of ytterbium, gadolinium, erbium, and dysprosium result in homogeneous distributions. This dissimilar behavior is ascribed to differences in the crystallization pathways through which the MOF is formed. Along with the synthetic and crystallization study and considering the structural features of this MOF family, we also disclose here a comprehensive characterization of the magnetic properties of the compounds and the heat capacity behavior under different external magnetic fields., The study was supported by grants CTQ-2017-87262-R and PID2021-12277OB-100 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”; grants PID2019-107675-RB-I00 and PID2019-106315RB-I00 (Nympha) funded by MCIN/AEI/10.13039/501100011033; grant PLEC2021-007906 (SOLFuture) funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”; and grant FotoArt-CM (S2018/NMT-4367) funded by the regional government of Comunidad de Madrid and by “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Framework Adaptability and Concerted Structural Response in a Bismuth Metal-Organic Framework Catalyst.

  • Gómez-Oliveira, Eloy P.
  • Reinares-Fisac, Daniel
  • Aguirre-Díaz, Lina María
  • Esteban-Betegón, Fátima
  • Gutiérrez-Puebla, Enrique
  • Iglesias, Marta
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
  • Pintado-Sierra, Mercedes
Bismuth metal–organic frameworks (MOFs) as heterogeneous catalysts are scarce, and there is little knowledge on the influence of the MOF features on their resulting activity and behavior. Here, we present the synthesis, characterization, and catalytic activity in the one-pot multicomponent Strecker reaction with ketones of three new MOFs prepared with the combination of indium or bismuth and 4,4′,4′′,4′′′-methanetetrayltetrabenzoic acid. One of them, denoted BiPF-7, is very robust and chemically stable, and demonstrates a high activity in the formation of the desired α-aminonitriles. The interaction of the catalytic substrates with the metal centers in this MOF has been crystallographically characterized, showcasing a concerted framework adaptability process that involves structural changes in framework components that are not directly involved in the binding of the guests., Grant CTQ-2017-87262-R funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Grants PID2019-107675-RB-I00 and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033. Grant PLEC2021-007906 (SOLFuture) funded by MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR”.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the synthesis and crystallization processes on the cation distribution in a series of multivariate rare-earth metal-organic frameworks and their magnetic characterization

  • Vasile, R. L.
  • Godoy, A. A.
  • Puente Orench, I.
  • Nemes, N. M.
  • Peña O''Shea, V. A. de la
  • Gutiérrez-Puebla, E.
  • Martínez, J. L.
  • Monge, M. Á.
  • Gándara, F.
The incorporation of multiple metal atoms in multivariate metal-organic frameworks is typically carried out through a one-pot synthesis procedure that involves the simultaneous reaction of the selected elements with the organic linkers. In order to attain control over the distribution of the elements and to be able to produce materials with controllable metal combinations, it is required to understand the synthetic and crystallization processes. In this work, we have completed a study with the RPF-4 MOF family, which is made of various rare-earth elements, to investigate and determine how the different initial combinations of metal cations result in different atomic distributions in the obtained materials. Thus, we have found that for equimolar combinations involving lanthanum and another rare-earth element, such as ytterbium, gadolinium, or dysprosium, a compositional segregation takes place in the products, resulting in crystals with different compositions. On the contrary, binary combinations of ytterbium, gadolinium, erbium, and dysprosium result in homogeneous distributions. This dissimilar behavior is ascribed to differences in the crystallization pathways through which the MOF is formed. Along with the synthetic and crystallization study and considering the structural features of this MOF family, we also disclose here a comprehensive characterization of the magnetic properties of the compounds and the heat capacity behavior under different external magnetic fields.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of polycarboxylate rhodium(II) metal-organic polyhedra (MOPs) and their use as building blocks for highly connected metal-organic frameworks (MOFs)

  • Grancha, Thais|||0000-0001-9591-1058
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Zarekarizi, Farnoosh
  • Hernández López, Laura|||0000-0001-6394-2538
  • Albalad, Jorge|||0000-0001-5850-6723
  • Khobotov Bakishev, Akim|||0000-0002-6119-959X
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Morsali, Ali|||0000-0002-1828-7287
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Gándara, Felipe|||0000-0002-1671-6260
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Use of preformed metal-organic polyhedra (MOPs) as supermolecular building blocks (SBBs) for the synthesis of metal-organic frameworks (MOFs) remains underexplored due to lack of robust functionalized MOPs. Herein we report the use of polycarboxylate cuboctahedral Rh-MOPs for constructing highly-connected MOFs. Cuboctahedral MOPs were functionalized with carboxylic acid groups on their 12 vertices or 24 edges through coordinative or covalent post-synthetic routes, respectively. We then used each isolated polycarboxylate Rh-MOP as 12-c cuboctahedral or 24-c rhombicuboctahedral SBBs that, upon linkage with metallic secondary building units (SBUs), afford bimetallic highly-connected MOFs. The assembly of a pre-synthesized 12-c SBB with a 4-c paddle-wheel SBU, and a 24-c SBB with a 3-c triangular Cu SBU gave rise to bimetallic MOFs having ftw (4,12)-c or rht (3,24)-c topologies, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Steric hindrance in metal coordination drives the separation of pyridine regioisomers using rhodium(II)-based metal-organic polyhedra

  • Hernández López, Laura|||0000-0001-6394-2538
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Grancha, Thais|||0000-0001-9591-1058
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Maspoch, Daniel|||0000-0003-1325-9161
The physicochemical similarity of isomers makes their chemical separation through conventional techniques energy intensive. Herein, we report that, instead of using traditional encapsulation-driven processes, steric hindrance in metal coordination on the outer surface of Rh-based metal-organic polyhedra (Rh-MOPs) can be used to separate pyridine-based regioisomers via liquid-liquid extraction. Through molecular dynamics simulations and wet experiments, we discovered that the capacity of pyridines to coordinatively bind to Rh-MOPs is determined by the positions of the pyridine substituents relative to the pyridine nitrogen and is influenced by steric hindrance. Thus, we exploited the differential solubility of bound and non-bound pyridine regioisomers to engineer liquid-liquid self-sorting systems. As a proof of concept, we separated four different equimolecular mixtures of regioisomers, including a mixture of the industrially relevant compounds 2-chloropyridine and 3-chloropyridine, isolating highly pure compounds in all cases.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Clip-off Chemistry, Synthesis by Programmed Disassembly of Reticular Materials

  • Yang, Yunhui|||0000-0002-6007-2335
  • Broto-Ribas, Anna|||0000-0002-9672-4526
  • Ortín-Rubio, Borja|||0000-0002-0533-3635
  • Imaz, Inhar|||0000-0002-0278-1141
  • Gándara, Felipe|||0000-0002-1671-6260
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Jurado Moreno, Sergio
  • Busqué, Félix|||0000-0001-7566-4264
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
Bond breaking is an essential process in chemical transformations and the ability of researchers to strategically dictate which bonds in a given system will be broken translates to greater synthetic control. Here, we report extending the concept of selective bond breaking to reticular materials in a new synthetic approach that we call Clip-off Chemistry. We show that bond-breaking in these structures can be controlled at the molecular level; is periodic, quantitative, and selective; is effective in reactions performed in either solid or liquid phases; and can occur in a single-crystal-to-single-crystal fashion involving the entire bulk precursor sample. We validate Clip-off Chemistry by synthesizing two topologically distinct 3D metal-organic frameworks (MOFs) from two reported 3D MOFs, and a metal-organic macrocycle from metal-organic polyhedra (MOP). Clip-off Chemistry opens the door to the programmed disassembly of reticular materials and thus to the design and synthesis of new molecules and materials. Clip-off Chemistry, a new approach to synthesizing molecules and materials based on the programmed de-reticulation and controlled etching at the molecular level in reticular materials, is introduced. Using this strategy, we have transformed two 3D metal-organic frameworks (MOFs) into two topologically distinct 3D MOFs, and one metal-organic polyhedra into a metal-organic macrocycle.