Pasar al contenido principal

ESTRATEGIA MODULAR PARA OBTENER ARQUITECTURAS POROSAS MULTIFUNCIONALES PARA REACTIVIDAD A MEDIDA Y OTRAS APLICACIONES NANOTECNOLOGICAS

MAT2017-82288-C2-2-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phenyl Extended Naphthalene-Based Covalent Triazine Frameworks as Versatile Metal-Free Heterogeneous Photocatalysts

  • Fuerte-Diez, Beatriz
  • Valverde-González, Antonio
  • Pintado-Sierra, Mercedes
  • Sánchez, Félix
  • Maya, Eva M.
  • Iglesias, Marta
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Two new covalent triazines frameworks (CTFs) containing phenyl extended naphthalene units (with and without methoxy groups in the naphthalene core) are prepared by thermal and microwave activation. Both procedures yield similar chemical structures combining triazine acceptor units with donor aromatic groups, but they generate some differences in the morphology, structural organization, CO2 adsorption capacity, and thermal and optical properties. Besides, the methoxy groups of the naphthalene core have also influence in some of these properties. The resulting phenyl extended naphthalene CTFs are efficiently utilized as metal-free heterogeneous photocatalyst for the selective aerobic oxidation of sulfides and the dehydrogenative cross-coupling reactions under visible-light irradiation, showing a high chemical stability., The authors acknowledge grants MAT2017-82288-C2-2-P and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". A.V.G. thanks Ministerio de Universidades for FPU17/03463.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorine-Phenanthroimidazole Porous Organic Polymer: Efficient Microwave Synthesis and Photocatalytic Activity

  • Monterde, Cristina
  • Navarro Crespo, Rodrigo
  • Iglesias, Marta
  • Sánchez, Félix
A porous polymer containing a fluorophenylphenanthroimidazole core was easily prepared via one-pot Suzuki-Miyaura cross-coupling reactions under microwave heating. These new metal-free polymers have demonstrated heterogeneous photocatalytic activity toward aza-Henry reaction with reasonable recyclability. Their preparation require a minimal workup to build porous networks with control over the apparent surface area and pore volume from suitable molecular building blocks containing 2-(1H-phenanthro[9,10-d]imidazol-2-yl)-3,5-difluorophenol (PhIm-2F), as rigid and multitopic node, which afforded a conjugated porous polymer (CPP-PhIm-2F). A series of fluorinated ligands have shown their capability in the preparation of soluble and supported cationic Ru(bpy)(F-phenanthroimidazole) complexes by reaction with Ru(bpy)Cl and demonstrating a beneficial effect of two fluorine atoms on the photocatalytic effect., Authors acknowledge MINECO of Spain (Projects MAT2014- 52085-C2-2-P, MAT2017-82288-C2-2-P) and the Comunidad de Madrid S2013/MIT-2740 project for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adamantyl-BINOL as platform for chiral porous polymer aromatic frameworks. Multiple applications as recyclable catalysts

  • Monterde, Cristina
  • Navarro Crespo, Rodrigo
  • Iglesias, Marta
  • Sánchez, Félix
Herein, we report the synthesis of adamantyl-BINOL-based chiral porous aromatic polymers (Ad-BINOL-PAFs) for heterogeneous catalysis. Ad-BINOL-OH-PAF (365 m·g SA) was built through the covalent bonds among of 4,4′-dibromo-O-ethyl-protected adamantyl-BINOL with 1,3,5-Triphenylbenzene-4′,4″,4′″-triboronic acid and in the presence of [Ti(OiPr)] results an effective recyclable catalyst in the asymmetric addition of diethylzinc to aromatic aldehydes (ee up to 88%). The corresponding heterogenized phosphoric acid (Ad-BINOL-POH-PAF) was applied as heterogeneous recyclable organocatalyst for the cascade condensation/amine addition of anthranilamide with aldehydes and transfer hydrogenation reactions obtaining high yields but low enantioselectivity. On the other hand, heterogeneous phosphoric acid (Ad-BINOLs-POH-PAF) was also used as effective phosphate ligands for synthesis of rhodium(II) complexes which were effective catalysts in cyclopropanation of styrene affording chiral cyclopropanes in good yield and high diastereoselectivity (>99%) and moderate enantioselectivity (ee < 50%)., Authors acknowledge to MINECO of Spain (Project MAT2017-82288-C2-2-P) for financial support, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Femto- to Millisecond Time-Resolved Photodynamics of a Double-Functionalized Push–Pull Organic Linker: Potential Candidate for Optoelectronically Active MOFs

  • Gutiérrez, Mario
  • Duplouy-Armani, Lucie
  • Angiolini, Lorenzo
  • Pintado-Sierra, Mercedes
  • Sánchez, Félix
  • Douhal, Abderrazzak
© 2020 by the authors., The design of improved organic linkers for the further engineering of smarter metal–organic framework (MOF) materials has become a paramount task for a wide number of material scientists. In this report, a luminescent double-functionalized push–pull (electron donor–acceptor) archetype organic molecule, dimethyl 4-amino-8-cyanonaphthalene-2,6-dicarboxylate (Me2CANADC), has been synthesized and characterized. The optical steady-state properties of Me2CANADC are strongly influenced by the surrounding environment as a direct consequence of its strong charge transfer (CT) character. The relaxation from its first electronically excited singlet state follows a double pathway: (1) on one side deactivating from its local excited (LE) state in the sub-picosecond or picosecond time domain, and (2) on the other side undergoing an ultrafast intramolecular charge transfer (ICT) reaction that is slowing down in viscous solvents. The deactivation to the ground state of these species with CT character is the origin of the Me2CANADC luminescence, and they present solvent-dependent lifetime values ranging from 8 to 18 ns. The slow photodynamics of Me2CANADC unveils the coexistence of a non-emissive triplet excited state and the formation of a long-lived charge separated state (2 µs). These observations highlight the promising optical properties of Me2CANADC linker, opening a window for the design of new functional MOFs with huge potential to be applied in the fields of luminescent sensing and optoelectronics., This work was supported by the MINECO (Spain) through projects MAT-2017-8653-R and MAT2017-82288-C2-2-P. L. Duplouy-Armani thanks the university of Lille and Moblilex /France) for the mobility grant to the UCLM (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding Charge Transfer Mechanism on Effective Truxene-Based Porous Polymers–TiO2 Hybrid Photocatalysts for Hydrogen Evolution

  • Valverde-Gónzález, Antonio
  • López Calixto, Carmen G.
  • Barawi, Mariam
  • Gómez- Mendoza, Miguel
  • de la Peña O’Shea, Víctor A.
  • Liras, Marta
  • Gómez-Lor, Berta
  • Iglesias, Marta
[EN] Truxene-based porous polymers synthesized through the simple “solvent knitting” strategy from hexamethyl or tribenzyl truxene-based monomers (TxPP1 and TxPP2), and their corresponding TxPP@TiO2 hybrids are used as photocatalysts for H2 production from water using methanol as sacrificial agent, under UV-Vis light. These polymers present higher hydrogen evolution rate (HER) than TiO2, and remarkable thermo- and photo-stabilities. Hybrids TxPP-TiO2 exhibited intensely enhanced photocatalytic activity compared to TiO2 or TxPPs alone. In the presence of platinum (1%) as cocatalyst, HER from TxPP1@T-10 significantly boosted reaching values above 21000 μmol.g-1.h-1 which to the best of our knowledge, represents the highest HER reported for hybrids based on TiO2 and conjugated porous polymers. Interestingly, small structural differences of the corresponding truxene monomers result in different photocatalytic behavior. We focused here on gaining insight on the charge transfer mechanism and rationalizing the different photocatalytic performances in order to establish clear structure-activity relationships. In fact, photoluminescence and transient absorption spectroscopy demonstrated that the remarkably enhanced photocatalytic activity of the most active hybrids (TxPP1@TiO2) can be attributed to the efficiently photogenerated electron-hole separation by a direct Z-scheme mechanism, while lower performance of TxPP2@TiO2, is probably due to a less efficient heterojunction type II charge transfer mechanism., Authors acknowledge to MINECO/AEI/FEDER, UE of Spain (Projects MAT2017-82288-C2-2-P, CTQ2016-78557-R and ENE2016-79608-C2-1-R) and regional government of “Comunidad de Madrid” and European Structural Funds for their financial support to FotoArt-CM project (S2018/NMT-4367). AVG thanks Ministerio de Educación y Formación Profesional for FPU17/03463, M. L and M. B thank to MINECO and European Social Fund for a Ramón y Cajal grant (RyC-2015-18677) and Juan de la Cierva Formación grant (FJCI-2016-30567) respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A step forward in solvent knitting strategies: Ruthenium and gold phosphine complex polymerization results in effective heterogenized catalysts

  • Valverde-Gónzález, Antonio
  • Marchal, Gwendoline
  • Maya, Eva M.
  • Iglesias, Marta
Porous polymers based on ruthenium and gold triphenylphosphine complexes (KPhos(Ru), KPhos(Ru)Bi, KPhos(AuCl) and KPhos(AuNTf)) were prepared via a cost-effective solvent knitting method with [RuHClCO(PPh)] or AuXPPh (X = Cl, NTf) as single monomers or combined with biphenyl, which represents a further approach to obtain heterogenized catalysts. The resulting materials mainly preserve the metal coordination environment of their parent complexes, are stable up to 350 °C and have reasonable surface areas (250-300 m g for KPhos(Ru)-polymers). KPhos(Ru)s selectively catalyze the imination of alcohols in the presence of base and the results for KPhos(Au)s show they are effective for the intermolecular hydration and hydroamination of alkynes. These materials can be reused several times without significant loss of activity. This novel and simple method affords heterogenized catalysts that combine the reactivity and selectivity of their homogeneous counterparts with the stability and reusability of a heterogeneous framework., The authors acknowledge MINECO of Spain MAT2017-82288-C2-2-P project for financial support. AVG thanks Ministerio de Educación y Formación Profesional for FPU17/03463., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective Approach toward Conjugated Porous Organic Frameworks Based on Phenanthrene Building Blocks: Metal-Free Heterogeneous Photocatalysts

  • Monterde, Cristina
  • Pintado-Sierra, Mercedes
  • Navarro Crespo, Rodrigo
  • Sánchez, Félix
  • Iglesias, Marta
This paper reports a simple approach for the preparation of new photo-active conjugated porous polymers (CPPs) based on phenanthrene building blocks with a high Brunauer-Emmett-Teller (BET) surface area. Starting from 2,7-diiodophenanthrene-9,10-dione and its bis-dioxolane derivative with different alkynyl comonomers, we prepared a series of CPPs by C-C Sonogashira-Hagihara coupling activated by microwaves. Moreover, we demonstrated that these functionalized CPPs after hydrolysis to the corresponding diketones show much higher BET surface areas than those obtained directly from the phenanthrene-9,10-dione monomer. Reaction of diketone-hydrolyzed polymers with 2,4-difluoro-6-hydroxybenzaldehyde yields phenantroimidazole derivatives. Indeed, these structurally robust polymers result in efficient, recyclable, heterogeneous photo-organocatalysts for the aza-Henry reaction (C-H functionalization) induced by visible-light irradiation., Authors acknowledge MINEICO of Spain (project MAT2017-82288-C2-2-P) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Iron Phthalocyanine-Knitted Polymers as Electrocatalysts for the Oxygen Reduction Reaction

  • Valverde-Gónzález, Antonio
  • Guan, Li Zhi
  • Ferrer, M. Luisa
  • Iglesias, Marta
  • Maya, Eva M.
[EN] Knitted iron phthalocyanine-based porous polymer networks (K-FePcs) were prepared in a single step using solvent-knitting strategies with commercial iron phthalocyanine as a building monomer. The incorporation of different aryl comonomers (biphenyl and 1,2,4,5-tetraphenylbenzene) to FePc allowed quantitative yields, high porosities, and excellent ORR activity. The reversible Fe(III)/Fe(II) redox potential of FeN4 centers of the knitted polymer networks in N2-saturated electrolyte solution (i.e., ∼0.8 V vs RHE) were shown as good descriptors of their ORR activity. K-FePc2Ph presented the highest amount of FeN4 active sites and an adequate degree of steric hindrance to maintain the isolation between catalytically active sites. Moreover, it displayed comparable current density limits and superior mass activity and half-wave potential (i.e., 0.88 V vs RHE) than those of 20% Pt/C benchmark catalyst, while keeping higher stability toward methanol oxidation. K-FePc2Ph can be an interesting alternative to Pt-based ORR electrocatalysts., The authors acknowledge MINECO of Spain MAT2017-82288-C2-2-P and RTI2018-097728-B-I00 projects for financial support. A.V.-G. thanks Ministerio de Educación y Formación Profesional for FPU17/03463. L.Z.G. also acknowledges the Chinese Scholarship Council for a PhD research fellowship (CSC no. 201608330266)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anionic and neutral 2D indium metal-organic frameworks as catalysts for the Ugi one-pot multicomponent reaction

  • Reinares-Fisac, Daniel
  • Aguirre-Díaz, Lina María
  • Iglesias, Marta
  • Gutiérrez-Puebla, Enrique
  • Gándara Barragán, Felipe
  • Monge, M. Ángeles
Two metal–organic frameworks (MOFs) made of indium and 1,3,5-tris(4-carboxyphenyl)benzene (H3btb) and having a layered structure have been synthesized under solvothermal conditions: [In(btb)(H2O)(DMF)]·L (InPF-50) and [In2(btb)2Cl2]2−·[(CH3)2NH2]22+·L (InPF-51). The structures of both materials have been determined by single crystal X-ray diffraction. The synthetic study which has been carried out demonstrates the influence of the selected indium salt in obtaining each MOF. The structure of both materials consists of pairs of catenated layers, where the metal atoms display coordinated solvent ligands that provide potential open metal sites. The accessibility to these sites along with the presence of Lewis basic sites in the form of uncoordinated oxygen atoms make InPF-50 and -51 efficient catalysts for the four-component Ugi reaction. We attribute this high activity not only to the presence of both acid and basic sites, but also to their convenient locations in the MOF structures. This is further supported by the comparison with [In3O(btb)2(HCO2)]·L, InPF-110, a highly porous indium MOF that only displays Lewis acid sites, and shows lower activity., This work has been supported by the Spanish Ministry of Ministry of Science, Innovation and Universities Project MAT2016-78465-R, MAT2017-82288-C2-2-P, and CTQ2017-87262-R. D. R.-F. acknowledges an FPU scholarship from the Spanish Ministry of Science, Innovation and Universities. F. G. acknowledges the Spanish Ministry for Science, Innovation and Universities, for funding through the “Ramón y Cajal” program., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conversion of CO2 into chloropropene carbonate catalyzed by Iron (II) phthalocyanine hypercrosslinked porous organic polymer

  • Maya, Eva M.
  • Valverde-Gónzález, Antonio
  • Iglesias, Marta
Commercial iron (II) phthalocyanine (FePc) was knitted with biphenyl using a Friedel-Crafts reaction to yield a micro-meso porous organic polymer (FePc-POP) with a specific surface area of 427 m/g and 5.42% of iron loading. This strategy allowed for the direct synthesis of a heterogeneous catalyst from an iron containing monomer. The catalytic system, formed by the knitted polymer containing FePc and DMAP (4-dimethylamino pyridine) as base, results in an efficient heterogeneous catalyst in the cycloaddition of CO to epichlorohydrin to selectively obtain the corresponding cyclic carbonate. Thus, a TON (mmol substrate converted/mmol catalysts used) value of 2700 was reached in 3 h under mild reaction conditions (solvent free, 90 C, 3 bar of CO). The catalyst does not exhibit leaching during the reactions, which was attributed to the excellent stability of the metal in the macrocycle., This research was funded by to MINECO of Spain MAT2017-82288-C2-2-P. A. Valverde-González thanks Ministerio de Educación y Formación Profesional for FPU17/03463.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of porous organic polymers in gas separation properties of polycarbonate based mixed matrix membranes

  • Rodríguez-Jardón, L.
  • López-González, Mar
  • Iglesias, Marta
  • May, E. M.
Polycarbonate (PC) based mixed matrix membranes (MMMs) loaded with porous organic polymers as fillers exhibit very good performance in gas separation of industrial interest. Resulting MMMs show excellent compatibility between the two phases. The MMMs were prepared in less time than the reported PC-based MMMs, by controlled addition of the filler under ultrasound stirring and magnetic stirring sequences. PC-based MMM loaded with 20% of un-functionalized and functionalized filler containing NO groups (PC@2Ph and PC@2PhNO) showed very good performance because all gas permeability coefficients increased while the selectivity remained unchanged for most gas pair and even increased significantly respect to pure PC membrane. MMM prepared with the methylamino-functionalized filler (PC@2PhCHNH) showed a greater H/CH and CO/CH separation selectivity in comparison with PC, with a slight decrease in permeability coefficients. Compared with the PC-based MMM previously reported, PC@2Ph and PC@2PhNO were competitive for O/N and CO/CH and the best for H/CH separation. The PC@KAPs membranes prepared in this work also improved the performance of PC to hydrogen and methane recovery, become in an attractive for petrochemical industry., Authors acknowledge to MINEICO of Spain MAT2017-82288-C2-2-P project for financial support and Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the project: PGC2018-095364-B-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amino-functionalized zirconium and cerium MOFs: Catalysts for visible light induced aerobic oxidation of benzylic alcohols and microwaves assisted N-Alkylation of amines

  • Valverde-Gónzález, Antonio
  • Pintado-Sierra, Mercedes
  • Rasero-Almansa, Antonia M.
  • Sánchez, Félix
  • Iglesias, Marta
Herein we report that mixed zirconium-cerium-MOFs with amino-functionalized linkers (2-amino-1,4-benzenedicarboxylate, BDC-NH, and 4-aminonaphthalene-2,6-dicarboxylate, NDC-NH) act as effective non-noble-metal-based heterogeneous catalysts, for both the aerobic photooxidation of benzylic alcohols and for the direct microwaves activation N-alkylation of amines with alcohols. The catalytic performance has been studied considering two different approaches: the effect of NH functionalized linkers and the effect of hosting Ce species on Zr-MOFs. Zr- and ZrCe-MOFs resulted efficient visible-light-driven photocatalysts with high stability and considerable recyclability in the photocatalytic selective oxidation of alcohols to aldehydes using molecular oxygen as oxidant. These materials are also effective catalysts for the microwaves-assisted N-alkylation of amines with alcohols yielding selectively the imine (ZrCe-MOF) or the corresponding secondary amine (Ce-MOFs)., Authors acknowledge to MINECO of SpainMAT2017-82288-C2-2-P project for financial support. A.V.G. thanks Ministerio de Educación y Formación Profesional for FPU17/03463. M.P.S thanks to MINECO of Spain for RTI2018-096328-B-I00 project
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed Matrix Membranes Containing a Biphenyl-Based Knitting Aryl Polymer and Gas Separation Performance

  • Martinez-Tirado, Raquel
  • Yuriychuk, Nastasia
  • López-González, Mar
  • Iglesias, Marta
  • Maya, Eva M.
Novel mixed matrix membranes (MMMs) were prepared using Matrimid (M), polysulfone (PSF) or polyphenylene oxide (PPO) as the continuous phase and a porous biphenyl-based knitting aryl polymer as a filler, synthesized through the Friedel–Craft reaction. The filler had little influence on the thermal and morphological properties of the membranes but affected the mechanical and gas transport properties, which were different depending on the type of matrix. Thus, in the case of MMMs based on Matrimid, the filler increased considerably the permeability to all gases, although no improvements in selectivity were achieved. A PSF-based MMM showed minor permeability increases, but not in all gases, while the selectivity was particularly improved for hydrogen separations. A PPO-based MMM did not exhibit variation in permeability nor in permselectivity with the addition of the filler., This research was funded by Ministerio de Ciencia e Innovación through the projects MAT2017-82288-C2-2-P, PID2020-112590GB-C22 and PID2019-108552GB-100 projects for financial support, and the Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the project PGC2018-095364-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phenyl Extended Naphthalene-Based Covalent Triazine Frameworks as Versatile Metal- Free Heterogeneous Photocatalysts

  • Fuerte-Díez, Beatriz
  • Valverde-Gónzález, Antonio
  • Pintado-Sierra, Mercedes
  • Díaz Morales, Urbano
  • Sánchez, Félix
  • Maya, Eva M.
  • Iglesias, Marta
[EN] Two new covalent triazines frameworks (CTFs) containing phenyl extended naphthalene units (with and without methoxy groups in the naphthalene core) are prepared by thermal and microwave activation. Both procedures yield similar chemical structure combining triazine acceptor units with donor aromatic groups, but they generate some differences in the morphology, structural organization, CO2 adsorption capacity, thermal and optical properties. Besides, the methoxy groups of the naphthalene core have also influence in some of these properties. The resulting phenyl extended naphthalene CTFs were efficiently utilized as metalfree heterogeneous photocatalyst for the selective aerobic oxidation of sulfides and the dehydrogenative cross-coupling reactions under visible-light irradiation, showing a high chemical stability., MAT2017-82288-C2-2-P and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. A.V.G. thanks Ministerio de Universidades for FPU17/03463., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solventless esterification of glycerol with p-methoxycinnamic acid catalyzed by a novel sulfonic acid mesoporous solid: Reaction kinetics

  • Molinero, L.
  • Esteban, J.
  • Sánchez, Félix
  • García-Ochoa, Félix
  • Ladero, M.
As a way to valorise glycerol, the main by-product of biodiesel, this study is focused on the production of esters of p-methoxycinnamic acid and glycerol. These esters can replace hazardous octylmethoxycinnamate in the cosmetic industry, which is thought to act as an endocrine disruptor and can interfere with thyroid function. Several sulfonated mesoporous catalysts, with and without endcapping, were easily synthetized using several alcohols as porogens. These catalysts were characterized for structure and surface area, chemical composition and acidity, and tested under solventless conditions for the esterification of glycerol with p-methoxycinnamic acid. Their activity was similar to that of p-toluenesulfonic acid. The best catalysts for the reaction under study was the end-capped mesoporous solid prepared in isopropanol. Finally, the selected catalyst was tested in 9 runs conducted at 150–170 °C and at molar ratios glycerol:p-methoxycinnamic acid ranging from 3:1 to 9:1. The kinetic model that better fits to the experimental data comprises two esterification reactions in-series and a first-order catalyst deactivation. The activation energies were 87.33 ± 5.67 kJ mol for the average esterification to the monoglycerides, 69.17 ± 9.84 kJ mol in average for the reactions yielding the diglycerides, and 104.00 ± 15.30 kJ mol for the catalyst deactivation., Financial support from the Spanish Ministry of Science and Innovation (Projects CTQ2010-15460, CTQ2017-84963-C2-1-R, MAT2017-82288-C2-2-P and PID2020-112590GB-C22) is grate- fully acknowledged. The authors want to show gratitude to the technical staff of the NMR, microanalysis and X-ray diffractometry Central Research Facilities (CAIs) of the Complutense University of Madrid (UCM) for the preparation of samples and analysis. Also, we want to acknowledge the valuable discussions with Dr. Elena de la Fuente of the Department of Chemical Engineering and Materials of UCM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the spectroscopy and dynamics of a proton-transfer dye by functionalizing with phenyl groups

  • Gutierrez, Mario
  • García, Eduardo
  • Monterde, Cristina
  • Sánchez, Félix
  • Douhal, Abderrazzak
Molecules undergoing excited-state proton transfer (ESPT) reactions are among the most interesting systems from spectroscopic and photophysical viewpoints. These molecules can be further functionalized with electron donating or accepting groups, inducing intramolecular charge transfer (ICT) events, which might be coupled to the ESIPT ones, conferring them with different spectroscopic and photophysical properties, which can be essential to implement the related materials in many key scientific and technological fields. Here, we report new benzimidazole derivatives that are functionalized with a phenyl group, 2-(5,10-diphenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenol (DP-HPPI), and its methylated equivalent, 2-(2-methoxyphenyl)-5,10-diphenyl-1H-phenanthro[9,10-d]imidazole (DP-MPPI). The results prove that these molecules in solutions undergo an ultrafast ICT (400-700 fs) reaction. Additionally, DP-HPPI also undergoes a reversible ESIPT process in dichloromethane. However, this is precluded in acetonitrile due to the involvement of intermolecular H-bonds in this solvent. These results provide key insights into the development of proton-transfer materials with bespoke spectral and photodynamical properties., This research was supported by grants: PID2020-116519RB-I00, MAT2017-82288-C2-2-P, and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union (EU); SBPLY/19/180501/000212 funded by JCCM and by the EU through ‘‘Fondo Europeo de Desarollo Regional’’ (FEDER); and 2020-GRIN-28929 funded by UCLM (FEDER). M. G. also thanks the EU for financial support through Fondo Social Europeo Plus (FSE+).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the spectroscopy and dynamics of a proton-transfer dye by functionalizing with phenyl groups

  • Gutierrez, Mario
  • García, Eduardo
  • Monterde, Cristina
  • Sánchez, Félix
  • Douhal, Abderrazzak
Molecules undergoing excited-state proton transfer (ESPT) reactions are among the most interesting systems from spectroscopic and photophysical viewpoints. These molecules can be further functionalized with electron donating or accepting groups, inducing intramolecular charge transfer (ICT) events, which might be coupled to the ESIPT ones, conferring them with different spectroscopic and photophysical properties, which can be essential to implement the related materials in many key scientific and technological fields. Here, we report new benzimidazole derivatives that are functionalized with a phenyl group, 2-(5,10-diphenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenol (DP-HPPI), and its methylated equivalent, 2-(2-methoxyphenyl)-5,10-diphenyl-1H-phenanthro[9,10-d]imidazole (DP-MPPI). The results prove that these molecules in solutions undergo an ultrafast ICT (400-700 fs) reaction. Additionally, DP-HPPI also undergoes a reversible ESIPT process in dichloromethane. However, this is precluded in acetonitrile due to the involvement of intermolecular H-bonds in this solvent. These results provide key insights into the development of proton-transfer materials with bespoke spectral and photodynamical properties., This research was supported by grants: PID2020-116519RB-I00, MAT2017-82288-C2-2-P, and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union (EU); SBPLY/19/180501/000212 funded by JCCM and by the EU through ‘‘Fondo Europeo de Desarollo Regional’’ (FEDER); and 2020-GRIN-28929 funded by UCLM (FEDER). M. G. also thanks the EU for financial support through Fondo Social Europeo Plus (FSE+).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phenyl Extended Naphthalene-Based Covalent Triazine Frameworks as Versatile Metal-Free Heterogeneous Photocatalysts

  • Fuerte-Díez, Beatriz
  • Valverde-Gónzález, Antonio
  • Pintado-Sierra, Mercedes
  • Díaz Morales, Urbano
  • Sánchez, Félix
  • Maya, Eva M.
  • Iglesias, Marta
Two new covalent triazines frameworks (CTFs) containing phenyl extended naphthalene units (with and without methoxy groups in the naphthalene core) are prepared by thermal and microwave activation. Both procedures yield similar chemical structures combining triazine acceptor units with donor aromatic groups, but they generate some differences in the morphology, structural organization, CO adsorption capacity, and thermal and optical properties. Besides, the methoxy groups of the naphthalene core have also influence in some of these properties. The resulting phenyl extended naphthalene CTFs are efficiently utilized as metal-free heterogeneous photocatalyst for the selective aerobic oxidation of sulfides and the dehydrogenative cross-coupling reactions under visible-light irradiation, showing a high chemical stability., The authors acknowledge grants MAT2017-82288-C2-2-P and PID2020-112590GB-C22 funded by MCIN/AEI/10.13039/501100011033 and by“ERDF A way of making Europe”. A.V.G. thanks Ministerio de Universidades for FPU17/03463
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal Catalysis with Knitting Aryl Polymers: Design, Catalytic Applications, and Future Trends

  • Valverde-Gónzález, Antonio
  • Iglesias, Marta
  • Maya, Eva M.
In 2011, a new type of hyper-cross-linked polymers (HCPs) arose, known as knitting aromatic polymers (KAPs), characterized by their extraordinary chemical and thermal stability, by their porosity properties, and above all, for the simplicity of their synthesis based on the union of aromatic monomers, without any previous functionalization. The next logical step was the incorporation of metals within these networks, as support for different soluble molecular catalysts or metal nanoparticles (NPs). Thus, the number of metal-containing KAPs has been gradually growing in the past decade, and we have considered that now, in the 10th anniversary of the first KAPs reported, a review of all the metal-containing KAPs and their application as heterogeneous metal catalysts is mandatory. In this review, the most relevant characteristics of all KAPs that contain metals are summarized, divided into two large groups, either as metal complexes or as metal NPs, and classified according to the type of metal incorporated. Finally, the catalytic activities were compared based on the metal employed in each studied reaction, and the future goals of these types of materials are commented on. ©, The authors acknowledge to MINECO project of Spain MAT2017-82288-C2-2-P for financial support. A.V.-G. thanks Ministerio de Educación y Formación Profesional for a FPU17/03463 PhD research fellowship, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bromine pre-functionalized porous polyphenylenes: New platforms for one-step grafting and applications in reversible CO 2 capture

  • Sanz-Pérez, E.S.
  • Rodríguez-Jardón, Laura
  • Arencibia, A.
  • Sanz, R.
  • Iglesias, Marta
  • Maya, Eva M.
The condensation of aromatic and brominated monomers using the solvent knitting strategy has produced new porous polyphenylenes with high specific surfaces areas (935–1950 m2 g−1) and high bromine content (10–22 %). These bromine-polymers have been functionalized in a single step by reaction with TREN or TEPA alkylamines, studying their effect on the CO2 adsorption properties. Pure CO2 analyses show a maximum uptake of 1.03 and 1.54 mmol CO2/g for 2 Ph-TEPA and 5 Ph-TEPA respectively at 30 °C and atmospheric pressure. Resulting materials allow low heating cost during regeneration, and high stability after CO2 adsorption-desorption cycles, making these materials more easily recyclable than other TEPA-impregnated adsorbents., MINECO of Spain (Projects MAT2014-52085-C2-2-P and MAT2017-82288-C2-2-P) for financial support., Peer reviewed