Pasar al contenido principal

SUPERCONDENSADORES CON ALTA EFICIENCIA Y EL PAPEL JUGADO POR MEZCLAS EUTECTICAS EN LA PREPARACION DE ELECTRODOS Y LA OPTIMIZACION DE ELECTROLITOS TIPO “WATER-IN-SALT”

RTI2018-097728-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Iron Phthalocyanine-Knitted Polymers as Electrocatalysts for the Oxygen Reduction Reaction

  • Valverde-Gónzález, Antonio
  • Guan, Li Zhi
  • Ferrer, M. Luisa
  • Iglesias, Marta
  • Maya, Eva M.
[EN] Knitted iron phthalocyanine-based porous polymer networks (K-FePcs) were prepared in a single step using solvent-knitting strategies with commercial iron phthalocyanine as a building monomer. The incorporation of different aryl comonomers (biphenyl and 1,2,4,5-tetraphenylbenzene) to FePc allowed quantitative yields, high porosities, and excellent ORR activity. The reversible Fe(III)/Fe(II) redox potential of FeN4 centers of the knitted polymer networks in N2-saturated electrolyte solution (i.e., ∼0.8 V vs RHE) were shown as good descriptors of their ORR activity. K-FePc2Ph presented the highest amount of FeN4 active sites and an adequate degree of steric hindrance to maintain the isolation between catalytically active sites. Moreover, it displayed comparable current density limits and superior mass activity and half-wave potential (i.e., 0.88 V vs RHE) than those of 20% Pt/C benchmark catalyst, while keeping higher stability toward methanol oxidation. K-FePc2Ph can be an interesting alternative to Pt-based ORR electrocatalysts., The authors acknowledge MINECO of Spain MAT2017-82288-C2-2-P and RTI2018-097728-B-I00 projects for financial support. A.V.-G. thanks Ministerio de Educación y Formación Profesional for FPU17/03463. L.Z.G. also acknowledges the Chinese Scholarship Council for a PhD research fellowship (CSC no. 201608330266)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogen bonding in ternary mixtures of N-Methyl morpholine Oxide, water and Dimethyl sulfoxide for enhanced cellulose dissolution capabilities

  • Zhang, H.
  • González-Aguilera, Laura
  • López García, Daniel
  • Ferrer, María L.
  • Monte, Francisco del
  • Gutiérrez, María C.
N-Methylmorpholine-N-oxide (NMMO) is the solvent of choice in the lyocell process because of the interesting biodegradable, non-toxic and non-ecotoxic features that the full recovery of NMMO provides to the process. NMMO is used in its monohydrate form (1NMMO:1H2O) and cellulose dissolution occurs via hydrogen bond (HBs) formation between the oxygen at the oxide group (as the HB acceptor, HBA) and the hydroxyl groups of the cellulosic units (as the HB donor, HBD). Interestingly, HO is a serious competitor for NMMO to form HBs with cellulose so the number of HO-cellulose-HBs should be kept under control. Addition of co-solvents has become a common practice and the challenge is studying the capability of this additional co-solvent to balance the NMMO-cellulose-HBs versus HO-cellulose-HBs and thus modify the solvent capabilities of the resulting ternary mixture. Herein, we prepared ternary mixtures by addition of the respective equivalents of HO and DMSO (e.g., 1:0.5, 1:1 and 0.5:1) to anhydrous NMMO to obtain 1NMMO:1HO:0.5DMSO, 1NMMO:1HO:1DMSO and 1NMMO:0.5HO:1DMSO. We correlated the solvent capability with the HB formed among the components in the different three ternary mixtures. 1NMMO:0.5HO:1DMSO controlled the number of HO-cellulose-HBs better than the other two mixtures and this helped to maintain the resulting cellulose solution in the liquid form at room temperature., This work was supported by MINECO/FEDER (Project Number RTI2018-097728-B-I00). H. Zhang acknowledges the China Schol- arship Council for a PhD research fellowship (CSC No. 201706460015). L. González-Aguilera acknowledges MICIN for a PhD research contract (FPI Contract No. PRE2019-090008). The Servicio Interdepartamental de Investigación (SIdI) of the Universidad Autónoma de Madrid is acknowledged for helpful assistance with NMR and DSC studies.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous Co-Solvent in Zwitterionic-based Protic Ionic Liquids as Electrolytes in 2.0 V Supercapacitors

  • Lu, Xuejun
  • Vicent-Luna, José Manuel
  • Calero, Sofia
  • Roldán-Ruiz, María J.
  • Jiménez, Ricardo
  • Ferrer, M. Luisa
  • Gutiérrez, María C.
  • Monte, Francisco del
High-performance energy-storage devices are receiving great interest in sustainable terms as a required complement to renewable energy sources to level out the imbalances between supply and demand. Besides electrode optimization, a primary objective is also the judicious design of high-performance electrolytes combining novel ionic liquids (ILs) and mixtures of aqueous solvents capable of offering "à la carte" properties. Herein, it is described the stoichiometric addition of a zwitterion such as betaine (BET) to protic ILs (PILs) such as those formed between methane sulfonic acid (MSAH) or p-toluenesulfonic acid (PTSAH) with ethanolamine (EOA). This addition resulted in the formation of zwitterionic-based PILs (ZPILs) containing the original anion and cation as well as the zwitterion. The ZPILs prepared in this work ([EOAH]+ [BET][MSA]- and [EOAH]+ [BET][PTSA]- ) were liquid at room temperature even though the original PILs ([EOAH]+ [MSA]- and [EOAH]+ [PTSA]- ) were not. Moreover, ZPILs exhibited a wide electrochemical stability window, up to 3.7 V vs. Ag wire for [EOAH]+ [BET][MSA]- and 4.0 V vs. Ag wire for [EOAH]+ [BET][PTSA]- at room temperature, and a high miscibility with both water and aqueous co-solvent (WcS) mixtures. In particular, "WcS-in-ZPIL" mixtures of [EOAH]+ [BET][MSA]- in 2 H2 O/ACN/DMSO provided specific capacitances of approximately 83 F g-1 at current densities of 1 A g-1 , and capacity retentions of approximately 90 % after 6000 cycles when operating at a voltage of 2.0 V and a current density of 4 A g-1 ., This work was supported by MINECO/FEDER (Project RTI2018−097728-B−I00). X.L. acknowledges Chinese Scholarship Council for a Ph.D. research fellowship (CSC no. 201706690022). M. J. Roldán-Ruiz also acknowledges MCIU for a FPI research contract. R.J. acknowledges M-Era-net 2016 for project PCIN-2017-110. The Servicio Interdepartamental de Investigación (SIdI) of the Universidad Autónoma de Madrid is acknowledged for helpful assistance with NMR and DSC studies. We also thank C3UPO for the HPC support., Peer reviewed