Pasar al contenido principal

POLIEDROS METAL-ORGANICOS COMO PARTICULAS POROSAS SUB-5 NM PARA EL DESARROLLO DE NUEVOS ADSORBENTES Y SISTEMAS DE LIBERACION

RTI2018-095622-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 77
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Recyclable Homogeneous Catalysis Enabled by Dynamic Coordination on Rhodium(II) Axial Sites of Metal-Organic Polyhedra

  • Sánchez-Fuente, Miguel
  • Hernández López, Laura|||0000-0001-6394-2538
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
The activity of catalytic nanoparticles is strongly dependent on their surface chemistry, which controls colloidal stability and substrate diffusion toward catalytic sites. In this work, we studied how the outer surface chemistry of nanostructured Rh(II)-based metal-organic cages or polyhedra (Rh-MOPs) impacts their performance in homogeneous catalysis. Specifically, through post-synthetic coordination of aliphatic imidazole ligands onto the exohedral Rh(II) axial sites of Rh-MOPs, we solubilized a cuboctahedral Rh-MOP in dichloromethane, thereby enabling its use as a homogeneous catalyst. We demonstrated that the presence of the coordinating ligand on the surface of the Rh-MOP does not hinder its catalytic activity in styrene aziridination and cyclopropanation reactions, thanks to the dynamic Rh-imidazole coordination bond. Finally, we used similar ligand exchange post-synthetic reactions to develop a ligand-mediated approach for precipitating the Rh-MOP catalyst, facilitating the recovery and reuse of Rh-MOPs as homogeneous catalysts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Macroscopic Ultralight Aerogel Monoliths of Imine-based Covalent Organic Frameworks

  • Martín-Illán, Jesús Á.|||0000-0003-4069-0977
  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Castillo, Oscar
  • Beobide, Garikoitz|||0000-0002-6262-6506
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Zamora, Félix|||0000-0001-7529-5120
The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three-step method to produce COF aerogels, based on sol-gel transition, solvent-exchange, and supercritical CO drying, in which 2D imine-based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02 g cm), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25-35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro- and meso-porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32 g g), with high removal efficiency (ca. 99 %). The same three-step method can be used to create functional composites of these COF aerogels with nanomaterials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Elucidating pore chemistry within metal-organic frameworksviasingle crystal X-ray diffraction, from fundamental understanding to application

  • Albalad, Jorge|||0000-0001-5850-6723
  • Sumby, Christopher J.|||0000-0002-9713-9599
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Doonan, Christian|||0000-0003-2822-0956
Metal-organic frameworks (MOFs) have made inroads in diverse chemical sectors due to the essentially limitless combination of building units and the ability to post-synthetically modify their pore chemistry at the molecular level. The crystalline nature of MOFs permits the use of single crystal X-ray diffraction (SCXRD) to obtain crystallographic snapshots of these transformations, providing invaluable information into the unorthodox chemistry that MOFs can potentially offer. This highlight article aims to provide the reader with the most recent milestones in the use of SCXRD as a vanguard technique to connect molecular-level pore engineering of MOFs with new application fields hitherto unexplored.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering covalent organic frameworks in the modulation of photocatalytic degradation of pollutants under visible light conditions

  • Jiménez Almarza, Alicia|||0000-0001-6304-0200
  • López-Magano, Alberto|||0000-0001-7980-7218
  • Cano, Rafael|||0000-0002-0466-4889
  • Ortín-Rubio, Borja|||0000-0002-0533-3635
  • Díaz-García, Diana|||0000-0003-3057-4905
  • Gomez-Ruiz, Santiago|||0000-0001-9538-8359
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Aleman Lara, Jose Julian|||0000-0003-0164-1777
Mixtures of triphenylamine (TPA) and phenyl phenothiazine (PTH) fragments have been incorporated into a series of extended polyimine structures that have been applied in the photodegradation of pollutants of different nature under visible light irradiation. Results obtained revealed that materials containing PTH as the sole photoactive unit resulted in the most active photocatalytic material in the degradation of polybrominated diphenyl ether-1 and Sudan Red III. In contrast, the covalent organic framework containing only TPA acted as the best photocatalyst for the degradation of Methylene Blue. These different trends are related to the versatility of PTH moiety to trigger both photoredox and energy transfer processes, while TPA is only an effective energy transfer catalyst.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the supramolecular isomerism of MOF-74 by controlling the synthesis conditions

  • Gheorghe, Andreea
  • Imaz, Inhar
  • Vlugt, Jarl Ivar van der
  • Maspoch, Daniel
  • Tanase, Stefania
Supramolecular isomerism of metal-organic frameworks (MOFs) is known for several MOF structures, having direct implications on the properties of these materials. Although the synthesis of MOF isomers is mainly serendipitous in nature, achieving controlled formation of a target framework is highly relevant for practical applications. This work discusses the influence of additives and synthesis conditions on the formation of porous isomers containing Zn2+ as nodes and 2,5-dihydroxy-1,4-benzenedicarboxylate (dobdc4-) as a linker. Using solvent mixtures containing strongly coordinated molecules, e.g. N,N'-dimethylformamide (DMF) and N-methylpyrrolidone (NMP), facilitates the formation of porous structures of type [Zn2(dobdc)(S)x]·yS (S = DMF, NMP) which are built from dinuclear Zn2(O)2(CO2)3 secondary building units (SBUs) consisting of two different edge-sharing polyhedra with the Zn2+ ions in a unsaturated coordinative environment. In the presence of water, the Zn2+ dimers are converted to one-dimensional infinite Zn2+ chains, in which the number of Zn2+-linker bonds increases, therefore giving a hydrolytically more stable coordination environment. The full characterization of the isomers as well as their conversion to the most stable isomer is presented., This work is part of the Research Priority Area Sustainable Chemistry of the University of Amsterdam, http://suschem.uva.nl, and was funded by a TOP-PUNT grant from the NWO. It was also supported by Spanish MINECO (projects PN RTI2018-095622-B-I00), the Catalan AGAUR (project 2014 SGR 80), the ERC under the EU-FP7 (ERC-Co 615954), and the CERCA Program/Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular approach for engineering interfacial interactions in magnetic/topological insulator heterostructures

  • Cuxart, M. G.
  • Valbuena, Miguel A.
  • Robles, Roberto
  • Moreno, César
  • Bonell, Fréderic
  • Sauthier, Guillaume
  • Imaz, Inhar
  • Xu, Heng
  • Nistor, Corneliu
  • Gargiani, Pierluigi
  • Valvidares, Manuel
  • Maspoch, Daniel
  • Gambardella, Pietro
Controlling interfacial interactions in magnetic/topological insulator heterostructures is a major challenge for the emergence of novel spin-dependent electronic phenomena. As for any rational design of heterostructures that rely on proximity effects, one should ideally retain the overall properties of each component while tuning interactions at the interface. However, in most inorganic interfaces, interactions are too strong, consequently perturbing, and even quenching, both the magnetic moment and the topological surface states at each side of the interface. Here, we show that these properties can be preserved using ligand chemistry to tune the interaction of magnetic ions with the surface states. By depositing Co-based porphyrin and phthalocyanine monolayers on the surface of Bi2Te3 thin films, robust interfaces are formed that preserve undoped topological surface states as well as the pristine magnetic moment of the divalent Co ions. The selected ligands allow us to tune the interfacial hybridization within this weak interaction regime. These results, which are in stark contrast with the observed suppression of the surface state at the first quintuple layer of Bi2Se3 induced by the interaction with Co phthalocyanines, demonstrate the capability of planar metal–organic molecules to span interactions from the strong to the weak limit., This research was funded by the CERCA Program/Generalitat de Catalunya and supported by the Spanish Ministry of Economy and Competitiveness, MINECO (under Contract Nos. MAT2016-78293-C6-2-R, MAT2016-75952-R, and RTI2018-095622-B-I00 and Severo Ochoa No. SEV-2017-0706), the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya 2017 SGR 827, the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI), the European Commission under the H2020 FET Grant Agreements Mechanics with Molecules (MEMO) (Grant No. 766864), TOCHA (Grant No. 824140), and the European Research Council (Grant No. 306652 SPINBOUND)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green synthesis of imine-based covalent organic frameworks in water

  • Martín-Illán, Jesús Á.
  • Rodríguez-San Miguel, David
  • Franco, Carlos
  • Imaz, Inhar
  • Maspoch, Daniel
  • Puigmartí Luis, Josep
  • Zamora, Félix
Dynamic covalent bonds have been advantageously used to direct the synthesis of crystalline porous covalent organic frameworks (COFs). Unlike the standard synthetic protocols that involve harsh conditions, this work provides a high-yield “one-pot” green synthesis of imine-based COFs in water. Additionally, this aqueous synthesis can be performed under microwave conditions, considerably reducing the reaction time., This work was supported by the EU (ERC-2015-STG microCrysFact 677020 and ERC-Co 615954), Swiss National Science Foundation (project no. 200021_160174 and 200021_181988), ETH Zürich, Catalan AGAUR (project 2017 SGR 238), and MICINN (“María de Maeztu” Programme for Units of Excellence in R&D CEX2018-000805-M, MAT2016-77608-C3-1P and RTI2018-095622-B-I00). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by Severo Ochoa program from MINECO (SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrathin films of porous metal–organic polyhedra for gas separation

  • Andrés, Miguel A.
  • Carné-Sánchez, Arnau
  • Sánchez-Laínez, Javier
  • Roubeau, Olivier
  • Coronas, Joaquín
  • Maspoch, Daniel
  • Gascón, Ignacio
Ultrathin films of a robust RhII‐based porous metal–organic polyhedra (MOP) have been obtained. Homogeneous and compact monolayer films (ca. 2.5 nm thick) were first formed at the air–water interface, deposited onto different substrates and characterized using spectroscopic methods, scanning transmission electron microscopy and atomic force microscopy. As a proof of concept, the gas separation performance of MOP‐supported membranes has also been evaluated. Selective MOP ultrathin films (thickness ca. 60 nm) exhibit remarkable CO2 permeance and CO2/N2 selectivity, demonstrating the great combined potential of MOP and Langmuir‐based techniques in separation technologies., This work was supported by the Spanish MINECO (projects RTI2018‐095622‐B‐I00, MAT2016‐78257‐R, MAT2016‐77290‐R and MAT2017‐86826‐R), the Catalan AGAUR (project 2017 SGR 328), the ERC under the EU‐FP7 (ERC‐Co 615954), the CERCA Program/Generalitat de Catalunya and the Aragon Government (T43_17R and E31_17R research groups). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (SEV‐2017‐0706). A.C.‐S. thanks the Spanish MINECO for Juan de la Cierva fellowship (IJCI‐2016‐29802), J. S.‐L. and M.A.A thank the Spanish Education Ministry Program FPU2014 for their Ph.D. grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geometry mismatch and reticular chemistry: Strategies to assemble metal–organic frameworks with non-default topologies

  • Guillerm, Vincent
  • Maspoch, Daniel
The past 20 years have witnessed tremendous advances in the field of porous materials, including the development of novel metal–organic frameworks (MOFs) that show great potential for practical applications aimed at addressing global environmental and industrial challenges. A critical tool enabling this progress has been reticular chemistry, through which researchers can design materials that exhibit highly regular (i.e., edge-transitive) topologies, based on the assembly of geometrically matched building blocks into specific nets. However, innovation sometimes demands that researchers steer away from default topologies to instead pursue unusual geometries. In this Perspective, we cover this aspect and introduce the concept of geometry mismatch, in which seemingly incompatible building blocks are combined to generate non-default structures. We describe diverse MOF assemblies built through geometry mismatch generated by use of ligand bend angles, twisted functional groups, zigzag ligands and other elements, focusing on carboxylate-based MOFs combined with common inorganic clusters. We aim to provide a fresh perspective on rational design of MOFs and to help readers understand the countless options now available to achieve greater structural complexity in MOFs., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase transfer of rhodium(II)-based metal–organic polyhedra bearing coordinatively bound cargo enables molecular separation

  • Grancha, Thais
  • Carné-Sánchez, Arnau
  • Hernández-López, Laura
  • Albalad, Jorge
  • Imaz, Inhar
  • Juanhuix, Judith
  • Maspoch, Daniel
The transfer of nanoparticles between immiscible phases can be driven by externally triggered changes in their surface composition. Interestingly, phase transfers can enhance the processing of nanoparticles and enable their use as vehicles for transporting molecular cargo. Herein we report extension of such phase transfers to encompass porous metal–organic polyhedra (MOPs). We report that a hydroxyl-functionalized, cuboctahedral Rh(II)-based MOP can be transferred between immiscible phases by pH changes or by cation-exchange reactions. We demonstrate use of this MOP to transport coordinatively bound cargo between immiscible layers, including into solvents in which the cargo is insoluble. As proof-of-concept that our phase-transfer approach could be used in chemical separation, we employed Rh(II)-based MOPs to separate a challenging mixture of structurally similar cyclic aliphatic (tetrahydrothiophene) and aromatic (thiophene) compounds. We anticipate that transport of coordinatively bound molecules will open new avenues for molecular separation based on the relative coordination affinity that the molecules have for the Rh(II) sites of MOP., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), and the ERC under the EU-FP7 (ERC-Co 615954). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV2017-0706). A.C.S. and T.G. thank the Spanish MINECO for Juan de la Cierva fellowships (IJCI-2016-29802 and FJCI2017-31598). J.A. acknowledges the Generalitat de Catalunya for an FI fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protection strategies for directionally-controlled synthesis of previously inaccessible metal–organic polyhedra (MOPs): the cases of carboxylate- and amino-functionalised Rh(ii)-MOPs

  • Albalad, Jorge
  • Carné-Sánchez, Arnau
  • Grancha, Thais
  • Hernández-López, Laura
  • Maspoch, Daniel
Herein we report that strategic use of protecting groups in coordination reactions enables directional inhibition that leads to synthesis of highly functionalised metal–organic polyhedra (MOPs), rather than of the extended coordination networks. Using this approach, we functionalised two new porous cuboctahedral Rh(II)-based MOPs with 24 peripheral carboxylic acid groups or 24 peripheral amino groups., This work was supported by the Spanish MINECO (Projects RTI2018-095622-B-I00), the Catalan AGAUR (Project 2017 SGR 238), the ERC, under the EU-FP7 (ERC-Co 615954), and the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (Grant No. SEV-2017-0706). A. C. S. and T. G. thank the Spanish MINECO for Juan de la Cierva fellowships (IJCI-2016-29802 and FJCI-2017-31598). J. A. acknowledges the Generalitat de Catalunya for an FI fellowship (2016FI B 00449)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic porous coordination polymers built-up from flexible 4,4′-dithiodibenzoate and rigid N-based ligands

  • Jarrah, Najmeh
  • Troyano, Javier
  • Carné-Sánchez, Arnau
  • Imaz, Inhar
  • Tangestaninejad, Shahram
  • Moghadam, Majid
  • Maspoch, Daniel
Herein we report the design, synthesis, structural characterisation and functional testing of a series of Cu(II) coordination polymers containing flexible 4,4′-dithiodibenzoate ligand (4,4′-DTBA), with or without auxiliary N-donor ligands. Reaction of Cu(II) with 4,4′-DTBA yielded a 1D coordination polymer (1) based on Cu(II) paddlewheel units connected by 4,4′-DTBA, to form cyclic loop chains with intramolecular voids that exhibit reversible structural transformations upon subsequent solvent exchange in methanol to afford a new, crystalline, permanently-porous structure (1′). However, when the same reaction was run with pyridine, it formed a porous 2D coordination polymer (2). We have attributed the difference in dimensionality seen in the two products to the coordination of pyridine on the axial site of the Cu(II) paddle-wheel, which forces flexible 4,4′-DTBA to adopt a different conformation. Reactions in the presence of 4,4′-bipyridine (4,4′-bpy) afforded two new, flexible, 2D coordination polymers (3 & 4). Lower concentrations of 4,4′-bpy afforded a structure (3) built from 1D chains analogous to those in 1 and connected through 4,4′-bpy linkers coordinated to the axial positions. Interestingly, 3 showed reversible structural transformations triggered by either solvent exchange or thermal treatment, each of which yielded a new crystalline and permanently porous phase (3′). Finally, use of higher concentrations of 4,4′-bpy led to a coordination polymer (4) based on a distorted CuO3N2 trigonal bipyramid, rather than on the Cu(II) paddlewheel. The connection of these motifs by 4,4′-DTBA resulted in a zig-zag 1D chain connected through 4,4′-bpy ligands to form a porous 2D network. Interestingly, 4 also underwent reversible thermal transformation to yield a microporous coordination polymer (4′)., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), and the ERC under the EU-FP7 (ERC-Co 615954). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Net-clipping: An approach to deduce the topology of metal–organic frameworks built with zigzag ligands

  • Ortín-Rubio, Borja
  • Ghasempour, Hosein
  • Guillerm, Vincent
  • Morsali, Ali
  • Juanhuix, Judith
  • Imaz, Inhar
  • Maspoch, Daniel
Herein we propose a new approach for deducing the topology of metal–organic frameworks (MOFs) assembled from organic ligands of low symmetry, which we call net-clipping. It is based on the construction of nets by rational deconstruction of edge-transitive nets comprising higher-connected molecular building blocks (MBBs). We have applied net-clipping to predict the topologies of MOFs containing zigzag ligands. To this end, we derived 2-connected (2-c) zigzag ligands from 4-c square-like MBBs by first splitting the 4-c nodes into two 3-c nodes and then clipping their two diagonally connecting groups. We demonstrate that, when this approach is applied to the 17 edge-transitive nets containing square-like 4-c MBBs, net-clipping leads to generation of 10 nets with different underlying topologies. Moreover, we report that literature and experimental research corroborate successful implementation of our approach. As proof-of-concept, we employed net-clipping to form three new MOFs built with zigzag ligands, each of which exhibits the deduced topology., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), and the ERC under the EU-FP7 (ERC-Co 615954). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spray-drying synthesis of MOFs, COFs, and related composites

  • Troyano, Javier
  • Çamur, Ceren
  • Garzón, Luis E.
  • Carné-Sánchez, Arnau
  • Imaz, Inhar
  • Maspoch, Daniel
Metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) are among the most attractive porous materials today. They exhibit outstanding porosity for countless applications such as gas storage, CO2 capture, gas separation, sensing, drug delivery, and catalysis. Moreover, researchers have recently begun to combine MOFs or COFs with other functional materials to obtain composites that boast the respective strengths, and mitigate the respective weaknesses, of each component, enabling enhanced performance in many of the aforementioned applications. Accordingly, development of methods for fabrication of MOFs, COFs, and related composites is important for facilitating adoption of these materials in industry. One promising synthetic technique is spray-drying, which is already well-integrated in manufacturing processes for diverse sectors. It enables rapid, continuous and scalable production of dry microspherical powders in a single step, leading to lower fabrication costs and shorter production times compared to traditional methods., This work was supported by the Spanish MINECO (Project RTI2018-095622-B-I00), the Catalan AGAUR (Project 2017 SGR 238), and the ERC, under the EU-FP7 (ERC-Co 615954). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme-powered porous micromotors built from a hierarchical micro- and mesoporous UiO-type metal–organic framework

  • Yang, Yunhui
  • Arqué, Xavier
  • Patiño, Tania
  • Pérez-Carvajal, Javier
  • Imaz, Inhar
  • Maspoch, Daniel
  • Sánchez, Samuel
Here, we report the design, synthesis, and functional testing of enzyme-powered porous micromotors built from a metal–organic framework (MOF). We began by subjecting a presynthesized microporous UiO-type MOF to ozonolysis, to confer it with mesopores sufficiently large to adsorb and host the enzyme catalase (size: 6–10 nm). We then encapsulated catalase inside the mesopores, observing that they are hosted in those mesopores located at the subsurface of the MOF crystals. In the presence of H2O2 fuel, MOF motors (or MOFtors) exhibit jet-like propulsion enabled by enzymatic generation of oxygen bubbles. Moreover, thanks to their hierarchical pore system, the MOFtors retain sufficient free space for adsorption of additional targeted species, which we validated by testing a MOFtor for removal of rhodamine B during self-propulsion., This work was supported by BIST-IGNITE (MOFtors), the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 866348: iNanoSwarms). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706). Y.Y. acknowledges the China Scholarship Council for scholarship support. X.A. thanks the Spanish MINECO for the Severo Ochoa program (SEV-2014-0425) for the Ph.D. fellowship (PRE2018-083712). S.S. thanks the Pengcheng Scholar Professorship at Harbin Institute of Technology Shenzhen, China. T.P. thanks the European Union’s Horizon 2020 research and innovation program, under the Marie Skłodowska-Curie Individual Fellowship (H2020-MSCA-IF2018, DNA-bots)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Steric hindrance in metal coordination drives the separation of pyridine regioisomers using rhodium(II)-based metal–organic polyhedra

  • Hernández-López, Laura
  • Martínez Esaín, Jordi
  • Carné-Sánchez, Arnau
  • Grancha, Thais
  • Faraudo, Jordi
  • Maspoch, Daniel
The physicochemical similarity of isomers makes their chemical separation through conventional techniques energy intensive. Herein, we report that, instead of using traditional encapsulation‐driven processes, steric hindrance in metal coordination on the outer surface of RhII‐based metal–organic polyhedra (Rh‐MOPs) can be used to separate pyridine‐based regioisomers via liquid–liquid extraction. Through molecular dynamics simulations and wet experiments, we discovered that the capacity of pyridines to coordinatively bind to Rh‐MOPs is determined by the positions of the pyridine substituents relative to the pyridine nitrogen and is influenced by steric hindrance. Thus, we exploited the differential solubility of bound and non‐bound pyridine regioisomers to engineer liquid–liquid self‐sorting systems. As a proof of concept, we separated four different equimolecular mixtures of regioisomers, including a mixture of the industrially relevant compounds 2‐chloropyridine and 3‐chloropyridine, isolating highly pure compounds in all cases., This work was supported by the Spanish MINECO (project RTI2018‐095622‐B‐I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (Grant No. SEV‐2017‐0706). A.C.S. and T.G. thank the Spanish MINECO for Juan de la Cierva fellowships (IJCI‐2016–29802 and FJCI‐2017–31598). L.H. acknowledges the support from the Spanish State Research Agency (PRE2019‐088056). J.F.G. acknowledges funding from the Spanish Research Agency (AEI, CTQ2017‐87262‐R, EUR2019‐103824). The project that generated these results received support from a fellowship (LCF/BQ/PR20/11770011) of the “la Caixa” Foundation (ID 100010434). We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae II., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perspectives for polychlorinated trityl radicals

  • Ratera, Immaculada
  • Vidal Gancedo, José
  • Maspoch, Daniel
  • Bromley, Stefan T.
  • Crivillers, Núria
  • Mas Torrent, Marta
An organic free radical is a molecule with one or more unpaired electrons. Although most free radicals are highly reactive, chemists have developed a few families of so-called persistent organic radicals with high kinetic stabilities. Polychlorinated trityl radicals, also known as polychlorotriphenylmethyl (PTM) radicals, are particularly chemically stable due to the high steric hindrance provided by the chlorine atoms in ortho positions which protect their single unpaired electron localised on the central carbon atom. In addition to their inherent magnetic spin due to the unpaired electron, PTMs exhibit other appealing properties such as a rich electrochemistry and characteristic optical properties (absorption and emission). Moreover, it has been shown that these properties can be tuned through the preparation of a large library of PTM-based derivatives. Here, we review recent developments employing PTM radicals, which include their implementation in molecular electronic junctions/switches, as building blocks for the preparation of magnetic networks and opto-electronic devices/materials and their exploitation in bio-applications., The authors thank Prof. Jaume Veciana and Prof. Concepció Rovira for their continuous support along all these years. This work was funded by the Spanish Ministry of Science and Innovation with the projects GENESIS PID2019-111682RB-I00, Mol4Bio PID2019-105622RB-I00, RTI2018-095622-B-I00 and RTI2018-095460-B-100, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Grant No. SEV-2017-0706) and the Spanish Structures of Excellence María de Maeztu program (MDM-2017-0767). The authors also thank the Generalitat de Catalunya (2017-SGR-918, 2017SGR13 and 2017SGR238). It was also funded by the CERCA Program/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elucidating pore chemistry within metal–organic frameworks via single crystal X-ray diffraction; from fundamental understanding to application

  • Albalad, Jorge
  • Sumby, Christopher J.
  • Maspoch, Daniel
  • Doonan, Christian J.
Metal–organic frameworks (MOFs) have made inroads in diverse chemical sectors due to the essentially limitless combination of building units and the ability to post-synthetically modify their pore chemistry at the molecular level. The crystalline nature of MOFs permits the use of single crystal X-ray diffraction (SCXRD) to obtain crystallographic snapshots of these transformations, providing invaluable information into the unorthodox chemistry that MOFs can potentially offer. This highlight article aims to provide the reader with the most recent milestones in the use of SCXRD as a vanguard technique to connect molecular-level pore engineering of MOFs with new application fields hitherto unexplored., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). CJS and CJD gratefully acknowledge the Australian Research Council for funding (DP190101402)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heterogeneous catalysts with programmable topologies generated by reticulation of organocatalysts into metal-organic frameworks: The case of squaramide

  • Broto-Ribas, Anna
  • Vignatti, Claudia
  • Jimenez-Almarza, Alicia
  • Luis-Barrera, Javier
  • Dolatkhah, Zahra
  • Gándara Barragán, Felipe
  • Imaz, Inhar
  • Mas-Ballesté, Rubén
  • Alemán, José
  • Maspoch, Daniel
A well-established strategy to synthesize heterogeneous, metal-organic framework (MOF) catalysts that exhibit nanoconfinement effects, and specific pores with highly-localized catalytic sites, is to use organic linkers containing organocatalytic centers. Here, we report that by combining this linker approach with reticular chemistry, and exploiting three-dimensioanl (3D) MOF-structural data from the Cambridge Structural Database, we have designed four heterogeneous MOF-based catalysts for standard organic transformations. These programmable MOFs are isoreticular versions of pcu IRMOF-16, fcu UiO-68 and pillared-pcu SNU-8X, the three most common topologies of MOFs built from the organic linker p,p’-terphenyldicarboxylic acid (tpdc). To synthesize the four squaramide-based MOFs, we designed and synthesized a linker, 4,4’-((3,4‐dioxocyclobut‐1‐ene‐1,2‐diyl)bis(azanedyil))dibenzoic acid (Sq_tpdc), which is identical in directionality and length to tpdc but which contains organocatalytic squaramide centers. Squaramides were chosen because their immobilization into a framework enhances its reactivity and stability while avoiding any self-quenching phenomena. Therefore, the four MOFs share the same organocatalytic squaramide moiety, but confine it within distinct pore environments. We then evaluated these MOFs as heterogeneous H-bonding catalysts in organic transformations: a Friedel-Crafts alkylation and an epoxide ring-opening. Some of them exhibited good performance in both reactions but all showed distinct catalytic profiles that reflect their structural differences., This work was supported by the Spanish MINECO (projects RTI2018-095622-B-I00 and RTI2018-095038-B-I00), the Catalan AGAUR (project 2017 SGR 238), the ERC under the EU FP7 (ERC−Co 615954), European Union’s Horizon 2020 research and innovation program under grant agreement No. 685727, and European Structural Funds (S2018/NMT-4367). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of polycarboxylate rhodium(II) Metal–Organic Polyhedra (MOPs) and their use as building blocks for highly connected Metal–Organic Frameworks (MOFs)

  • Grancha, Thais
  • Carné-Sánchez, Arnau
  • Zarekarizi, Farnoosh
  • Hernández-López, Laura
  • Albalad, Jorge
  • Khobotov-Bakishev, Akim
  • Guillerm, Vincent
  • Morsali, Ali
  • Juanhuix, Judith
  • Gándara Barragán, Felipe
  • Imaz, Inhar
  • Maspoch, Daniel
Use of preformed metal-organic polyhedra (MOPs) as supermolecular building blocks (SBBs) for the synthesis of metal-organic frameworks (MOFs) remains underexplored due to lack of robust functionalized MOPs. Herein we report the use of polycarboxylate cuboctahedral RhII-MOPs for constructing highly-connected MOFs. Cuboctahedral MOPs were functionalized with carboxylic acid groups on their 12 vertices or 24 edges through coordinative or covalent post-synthetic routes, respectively. We then used each isolated polycarboxylate RhII-MOP as 12-c cuboctahedral or 24-c rhombicuboctahedral SBBs that, upon linkage with metallic secondary building units (SBUs), afford bimetallic highly-connected MOFs. The assembly of a pre-synthesized 12-c SBB with a 4-c paddle-wheel SBU, and a 24-c SBB with a 3-c triangular CuII SBU gave rise to bimetallic MOFs having ftw (4,12)-c or rht (3,24)-c topologies, respectively., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Pro-gram/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). A.C.S. and T.G. thank the Spanish MINECO for Juan de la Cierva fellowships (IJCI-2016-29802 and FJCI-2017-31598). F.G. acknowledges funding from the Spanish Research Agency (AEI, CTQ2017-87262-R, EUR2019-103824). The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assembly of Colloidal Clusters Driven by the Polyhedral Shape of Metal-Organic Framework Particles

  • Liu, Yang
  • Wang, Jiemin
  • Imaz, Inhar
  • Maspoch, Daniel
Control of the assembly of colloidal particles into discrete or higher-dimensional architectures is important for the design of myriad materials, including plasmonic sensing systems and photonic crystals. Here, we report a new approach that uses the polyhedral shape of metal-organic-framework (MOF) particles to direct the assembly of colloidal clusters. This approach is based on controlling the attachment of a single spherical polystyrene particle on each face of a polyhedral particle via colloidal fusion synthesis, so that the polyhedral shape defines the final coordination number, which is equal to the number of faces, and geometry of the assembled colloidal cluster. As a proof of concept, we assembled six-coordinated (6-c) octahedral and 8-c cubic clusters using cubic ZIF-8 and octahedral UiO-66 core particles. Moreover, we extended this approach to synthesize a highly coordinated 12-c cuboctahedral cluster from a rhombic dodecahedral ZIF-8 particle. We anticipate that the synthesized colloidal clusters could be further evolved into spherical core-shell MOF@polystyrene particles under conditions that promote a higher fusion degree, thus expanding the methods available for the synthesis of MOF-polymer composites., This work was supported by the Spanish MINECO (project RTI2018-095622–B-I00), the Catalan AGAUR (project 2017 SGR 238), and by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant SEV-2017-0706). Y.L. acknowledges the China Scholarship Council for scholarship support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering covalent organic frameworks in the modulation of photocatalytic degradation of pollutants under visible light conditions

  • Jimenez-Almarza, Alicia
  • López-Magano, A.
  • Cano, Rafael
  • Ortín-Rubio, Borja
  • Díaz-García, D.
  • Gómez-Ruiz, Santiago
  • Imaz, Inhar
  • Maspoch, Daniel
  • Mas-Ballesté, Rubén
  • Alemán, José
Mixtures of triphenylamine (TPA) and phenyl phenothiazine (PTH) fragments have been incorporated into a series of extended polyimine structures that have been applied in the photodegradation of pollutants of different nature under visible light irradiation. Results obtained revealed that materials containing PTH as the sole photoactive unit resulted in the most active photocatalytic material in the degradation of polybrominated diphenyl ether-1 and Sudan Red III. In contrast, the covalent organic framework containing only TPA acted as the best photocatalyst for the degradation of Methylene Blue. These different trends are related to the versatility of PTH moiety to trigger both photoredox and energy transfer processes, while TPA is only an effective energy transfer catalyst., Financial support was provided by the European Research Council (ERC-CoG, contract number: 647550), Spanish Government (PID2019-110637RB-I00, RTI2018-095038-B-I00 and RTI2018-095622-B-I00), “Comunidad de Madrid” and European Structural Funds (S2018/NMT-4367). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). Alberto López-Magano thanks to UAM for FPI-UAM predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macroscopic Ultralight Aerogel Monoliths of Imine-based Covalent Organic Frameworks

  • Martín-Illán, Jesús Á.
  • Rodríguez-San Miguel, David
  • Castillo, Óscar
  • Beobide, Garikoitz
  • Pérez-Carvajal, Javier
  • Imaz, Inhar
  • Maspoch, Daniel
  • Zamora, Félix
The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three-step method to produce COF aerogels, based on sol-gel transition, solvent-exchange, and supercritical CO drying, in which 2D imine-based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02 g cm), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25–35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro- and meso-porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32 g g), with high removal efficiency (ca. 99 %). The same three-step method can be used to create functional composites of these COF aerogels with nanomaterials., This work has been supported by the Spanish MINECO (PID2019-106268GB-C32, MAT2016-77608-C3-1-P, PCI2018-093081, PID2019-108028GB-C21, and RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), Basque Government (IT1291-19), and through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Millimeter-Shaped Metal-Organic Framework/Inorganic Nanoparticle Composite as a New Adsorbent for Home Water-Purification Filters

  • Boix, Gerard
  • Han, Xu
  • Imaz, Inhar
  • Maspoch, Daniel
Heavy-metal contamination of water is a global problem with an especially severe impact in countries with old or poorly maintained infrastructure for potable water. An increasingly popular solution for ensuring clean and safe drinking water in homes is the use of adsorption-based water filters, given their affordability, efficacy, and simplicity. Herein, we report the preparation and functional validation of a new adsorbent for home water filters, based on our metal-organic framework (MOF) composite containing UiO-66 and cerium(IV) oxide (CeO2) nanoparticles. We began by preparing CeO2@UiO-66 microbeads and then encapsulating them in porous polyethersulfone (PES) granules to obtain millimeter-scale CeO2@UiO-66@PES granules. Next, we validated these granules as an adsorbent for the removal of metals from water by substituting them for the standard adsorbent (ion-exchange resin spheres) inside a commercially available water pitcher from Brita. We assessed their performance according to the American National Standards Institute (ANSI) guideline 53-2019, "Drinking Water Treatment Units - Health Effects Standard". Remarkably, a pitcher loaded with a combination of our CeO2@UiO-66@PES granules and activated carbon at standard ratios met the target reduction thresholds set by NSF/ANSI 53-2019 for all the metals tested: As(III), As(V), Cd(II), Cr(III), Cr(VI), Cu(II), Hg(II), and Pb(II). Throughout the test, the modified pitcher proved to be robust and stable. We are confident that our findings will bring MOF-based adsorbents one step closer to real-world use., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), and the ERC, under the EU-FP7 (ERC-Co 615954) and Hybead 862093. It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706). X.H. thanks the China Scholarship Council (CSC) for scholarship support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Clip-off Chemistry: Synthesis by Programmed Disassembly of Reticular Materials**

  • Yang, Yunhui
  • Broto-Ribas, Anna
  • Ortín-Rubio, Borja
  • Gándara, Fernando de la
  • Carné-Sánchez, Arnau
  • Guillerm, Vincent
  • Jurado, Sergio
  • Busqué, Félix
  • Juanhuix, Judith
  • Maspoch, Daniel
Bond breaking is an essential process in chemical transformations and the ability of researchers to strategically dictate which bonds in a given system will be broken translates to greater synthetic control. Here, we report extending the concept of selective bond breaking to reticular materials in a new synthetic approach that we call Clip-off Chemistry. We show that bond-breaking in these structures can be controlled at the molecular level; is periodic, quantitative, and selective; is effective in reactions performed in either solid or liquid phases; and can occur in a single-crystal-to-single-crystal fashion involving the entire bulk precursor sample. We validate Clip-off Chemistry by synthesizing two topologically distinct 3D metal-organic frameworks (MOFs) from two reported 3D MOFs, and a metal-organic macrocycle from metal-organic polyhedra (MOP). Clip-off Chemistry opens the door to the programmed disassembly of reticular materials and thus to the design and synthesis of new molecules and materials., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101019003, the Spanish MINECO (projects RTI2018-095622-B-I00 and PID2019-106403RB-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (Grant No. SEV-2017-0706). F.G. acknowledges funding from the Spanish Research Agency (AEI, CTQ2017-87262-R, EUR2019-103824). The project that generated these results received support from a fellowship (LCF/BQ/PR20/11770011) of the “la Caixa” Foundation (ID 100010434). Y.Y. acknowledges the China Scholarship Council for scholarship support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface chemistry of metal-organic polyhedra

  • Albalad, Jorge
  • Hernández-López, Laura
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Metal-organic polyhedra (MOPs) are discrete, intrinsically-porous architectures that operate at the molecular regime and, owing to peripheral reactive sites, exhibit rich surface chemistry. Researchers have recently exploited this reactivity through post-synthetic modification (PSM) to generate specialised molecular platforms that may overcome certain limitations of extended porous materials. Indeed, the combination of modular solubility, orthogonal reactive sites, and accessible cavities yields a highly versatile molecular platform for solution to solid-state applications. In this feature article, we discuss representative examples of the PSM chemistry of MOPs, from proof-of-concept studies to practical applications, and highlight future directions for the MOP field., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from the “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial Films Based on MOF Composites that Release Iodine Passively or Upon Triggering by Near-Infrared Light

  • Han, Xu
  • Balcerzak, Mateusz
  • Hernando Moriones, Oscar
  • Cano-Sarabia, Mary
  • Cortés, Pilar
  • Bastús, Neus G.
  • Puntes, Víctor F.
  • Llagostera, Montserrat
  • Imaz, Inhar
  • Maspoch, Daniel
Multidrug-resistant bacteria have become a global health problem for which new prophylactic strategies are now needed, including surface-coatings for hospital spaces and medical equipment. This work reports the preparation and functional validation of a metal-organic framework (MOF) based composite for the triggered controlled release of iodine, an antimicrobial element that does not generate resistance. It comprises beads of the iodophilic MOF UiO-66 containing encapsulated gold nanorods (AuNRs) coated with a silica shell. Irradiation of the AuNRs with near-infrared light (NIR) provokes a photothermal effect and the resultant heat actively liberates the iodine. After validating the performance of this composite, it is integrated into a polymer for the development of antibacterial films. This work assesses the adsorption of iodine into these composite films, as well as its passive long-term release and active light-triggered. Finally, this work validates the antibacterial activity of the composite films in vitro against gram-positive and gram-negative bacteria. The findings will surely inform the development of new prophylactic treatments., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00, RTI2018-099965-B-I00, AEI/FEDER, UE), the Catalan AGAUR (project 2017 SGR 238, 2017 SGR 1431), and the ERC, under the EU-FP7 (ERC-Co 615954). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). X.H. thanks the China Scholarship Council (CSC) for scholarship support (201804910551). M.B. thanks the Polish National Agency for Academic Exchange (contract no. PPN/BEK/2018/1/00094/U/00001). O.M. acknowledges financial support from the Spanish Ministry of Science and Innovation (MICINN) by FPI fellowship, resolved by the Agencia Estatal de Investigación (AEI) with reference (BES-2017-083043).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the surface chemistry of metal-organic polyhedra in their assembly into ultrathin films for gas separation

  • Tejedor, Inés
  • Andrés, Miguel A.
  • Carné-Sánchez, Arnau
  • Arjona, Mónica
  • Pérez-Miana, Marta
  • Sánchez-Laínez, Javier
  • Coronas, Joaquín
  • Fontaine, Philippe
  • Goldmann, Michel
  • Roubeau, Olivier
  • Maspoch, Daniel
  • Gascón, Ignacio
The formation of ultrathin films of Rh-based porous metal–organic polyhedra (Rh-MOPs) by the Langmuir–Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air–water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)12 and HRhMOP(oiz)12) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air–liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)12 films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO2/N2 separation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation., This work was funded by MCIN/AEI/10.13039/501100011033 and ERDF “A way of making Europe” (grant PID2019-105881RB-I00). The authors also acknowledge the support from the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (grant no. SEV-2017-0706). I.T. and M.P.-M. gratefully acknowledge their DGA PhD fellowship from Government of Aragon. The microscopy work was carried out in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia y Materiales de Aragon (LMA-INMA). This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView contains code developed with funding from the European Union’s Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement no. 654000. The authors thank the synchrotron SOLEIL for beamtime provision under projects 20190435 and 20191874., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multicomponent, functionalized HKUST-1 analogues assembled via reticulation of prefabricated metal-organic polyhedral cavities

  • Khobotov-Bakishev, Akim
  • Baeckmann, Cornelia von
  • Ortín-Rubio, Borja
  • Hernández-López, Laura
  • Cortés Martínez, Alba
  • Martínez Esaín, Jordi
  • Gándara Barragán, Felipe
  • Juanhuix, Judith
  • Platero Prats, Ana E.
  • Faraudo, Jordi
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Metal-organic frameworks (MOFs) assembled from multiple building blocks exhibit greater chemical complexity and superior functionality in practical applications. Herein, we report a new approach based on using prefabricated cavities to design isoreticular multicomponent MOFs from a known parent MOF. We demonstrate this concept with the formation of multicomponent HKUST-1 analogues, using a prefabricated cavity that comprises a cuboctahedral Rh(II) metal-organic polyhedron functionalized with 24 carboxylic acid groups. The cavities are reticulated in three dimensions via Cu(II)-paddlewheel clusters and (functionalized) 1,3,5-benzenetricarboxylate linkers to form three- and four-component HKUST-1 analogues., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), the CERCA Program/Generalitat de Catalunya, and the MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR (EUR2020-112294). We also thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae III. ICN2 and ICMAB are supported by the Severo Ochoa program from the Spanish MINECO (grants SEV-2017-0706 and CEX2019-000917-S). The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). A.E.P.-P. acknowledges a Ramón y Cajal fellowship (RYC2018-024328-I). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coloration in supraparticles assembled from polyhedral metal-organic framework particles

  • Wang, Junwei
  • Liu, Yang
  • Bleyer, Gudrun
  • Goerlitzer, Eric S. A.
  • Englisch, Silvan
  • Przybilla, Thomas
  • Mbah, Chrameh Fru
  • Engel, Michael
  • Spiecker, Erdmann
  • Imaz, Inhar
  • Maspoch, Daniel
  • Vogel, Nicolas
Supraparticles are spherical colloidal crystals prepared by confined self-assembly processes. A particularly appealing property of these microscale structures is the structural color arising from interference of light with their building blocks. Here, we assemble supraparticles with high structural order that exhibit coloration from uniform, polyhedral metal–organic framework (MOF) particles. We analyse the structural coloration as a function of the size of these anisotropic building blocks and their internal structure. We attribute the angle-dependent coloration of the MOF supraparticles to the presence of ordered, onion-like layers at the outermost regions. Surprisingly, even though different shapes of the MOF particles have different propensities to form these onion layers, all supraparticle dispersions show well-visible macroscopic coloration, indicating that local ordering is sufficient to generate interference effects., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Pro-gram/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). Y.L. acknowledges the China Scholarship Council for scholarship support. T.P. and S.E. acknowledges support by DFG within the framework of the research training group GRK 1896. This research was supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Project-ID 416229255—SFB 1411. N.V. and M.E. also acknowledge funding by the DFG under projects VO 1824/7-1 and EN 905/2-1, respectively., Open Access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

pH-Triggered removal of nitrogenous organic micropollutants from water by using metal-organic polyhedra

  • Hernández-López, Laura
  • Cortés Martínez, Alba
  • Parella, Teodor
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Water pollution threatens human and environmental health worldwide. Thus, there is a pressing need for new approaches to water purification. Herein, we report a novel supramolecular strategy based on the use of a metal-organic polyhedron (MOP) as a capture agent to remove nitrogenous organic micropollutants from water, even at very low concentrations (ppm), based exclusively on coordination chemistry at the external surface of the MOP. Specifically, we exploit the exohedral coordination positions of RhII-MOP to coordinatively sequester pollutants bearing N-donor atoms in aqueous solution, and then harness their exposed surface carboxyl groups to control their aqueous solubility through acid/base reactions. We validated this approach for removal of benzotriazole, benzothiazole, isoquinoline, and 1-napthylamine from water., This work was supported by the Spanish MINECO (project RTI2018-095622-B−I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from the “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (grant no. SEV-2017-0706). L.H.L. acknowledges the support from the Spanish State Research Agency (PRE2019-088056)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of the two isomers of heteroleptic Rh12L6L′6 metal-organic polyhedra by screening of complementary linkers

  • Broto-Ribas, Anna
  • Gutiérrez, María Susana
  • Imaz, Inhar
  • Carné-Sánchez, Arnau
  • Gándara Barragán, Felipe
  • Juanhuix, Judith
  • Maspoch, Daniel
We have synthesised and characterised the two possible isomers of heteroleptic trigonal antiprismatic M12L6L′6 MOPs by screening reactions of rhodium acetate with different pairs of complementary dicarboxylate linkers. The resulting 12 new MOPs (eight of isomer A + four of isomer B) are microporous in the solid state, exhibiting Brunauer–Emmett–Teller (BET) surface areas as high as 770 m2 g−1., This work was supported by Spanish MINECO (project RTI2018-095622-B-I00) and “la Caixa” Foundation (ID 100010434; fellowship: LCF/BQ/PR20/11770011). ICN2 is supported by the Severo Ochoa programme from Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultralarge free-standing imine-based covalent organic framework membranes fabricated via compression

  • Martín-Illán, Jesús Á.
  • Suárez, José Antonio
  • Gómez-Herrero, Julio
  • Ares, Pablo
  • Gallego-Fuente, Daniel
  • Cheng, Youdong
  • Zhao, Dan
  • Maspoch, Daniel
  • Zamora, Félix
Demand continues for processing methods to shape covalent organic frameworks (COFs) into macroscopic objects that are needed for their practical applications. Herein, a simple compression method to prepare large-scale, free-standing homogeneous and porous imine-based COF-membranes with dimensions in the centimeter range and excellent mechanical properties is reported. This method entails the compression of imine-based COF-aerogels, which undergo a morphological change from an elastic to plastic material. The COF-membranes fabricated upon compression show good performances for the separation of gas mixtures of industrial interest, N2/CO2 and CH4/CO2. It is believed that the new procedure paves the way to a broader range of COF-membranes., This work was supported by the Spanish MINECO (PID2019-106268GB-C31, PID2019-106268GB-C32, PCI2018-093081, and RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), and through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). Y.C. and D.Z. acknowledge the National Research Foundation Singapore (NRF2018-NRF-ANR007 POCEMON) and the Ministry of Education – Singapore (MOE2018-T2-2-148, MOE2019-T2-1-093) for their financial support of this project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-Organic Polyhedra as Building Blocks for Porous Extended Networks

  • Khobotov-Bakishev, Akim
  • Hernández-López, Laura
  • Baeckmann, Cornelia von
  • Albalad, Jorge
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Metal–organic polyhedra (MOPs) are a subclass of coordination cages that can adsorb and host species in solution and are permanently porous in solid-state. These characteristics, together with the recent development of their orthogonal surface chemistry and the assembly of more stable cages, have awakened the latent potential of MOPs to be used as building blocks for the synthesis of extended porous networks. This review article focuses on exploring the key developments that make the extension of MOPs possible, highlighting the most remarkable examples of MOP-based soft materials and crystalline extended frameworks. Finally, the article ventures to offer future perspectives on the exploitation of MOPs in fields that still remain ripe toward the use of such unorthodox molecular porous platforms., A.K.-B. and L.H.-L. contributed equally to this work. This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). L.H.-L. acknowledges the support from the Spanish State Research Agency (PRE2019-088056). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “La Caixa” Foundation (ID 100010434).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal−Organic Frameworks: Why Make Them Small?

  • Wang, Jiemin
  • Imaz, Inhar
  • Maspoch, Daniel
Recent studies have demonstrated that metal−organic frameworks (MOFs) can be miniaturized down to the submicroscale and even nanoscale to create small MOFs. Herein, the basic concepts and recent progresses concerning the core question of “MOFs, why make them small?” are briefly introduced from three perspectives: those of size, shape, and processability. Small sizes endow MOFs with large outer surface area/volume ratios, leading to important differences in their characteristics (e.g., outer surface energy, number of defects, etc.) relative to their bulk scale counterparts and thus, opening the door to size-dependent properties such as flexibility or catalytic performance. Downsizing MOFs also enables shaping of them into unusual shapes. Among the most appealing morphologies are 2D nanosheets, whose structure can favor certain porosity-related applications. The controlled miniaturization of MOF particles also favors their integration onto surfaces and into devices as well as their colloidal stability, which in turn translates to the ability to use readily processable MOF-based liquids in countless processes, such as to drive the assembly of sophisticated meso- and macroscopic architectures, gels, monoliths, and porous liquids. It is believed that ongoing research to shrink MOFs via nanotechnology, as has been done with other classes of materials, will continue to yield novel MOF-related materials that exhibit unprecedented structural and functional properties., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), and the ERC, under the EU-FP7 (ERC-Co 615954). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Propagating MOF flexibility at the macroscale: the case of MOF-based mechanical actuators

  • Troyano, Javier
  • Maspoch, Daniel
Shapeshifting materials have captured the imagination of researchers for their myriad potential applications, yet their practical development remains challenging. These materials operate by mechanical actuation: their structural responses to external stimuli generate mechanical work. Here, we review progress on the use of flexible metal-organic frameworks (MOFs) in composite actuators that shapeshift in a controlled fashion. We highlight the dynamic behaviour of flexible MOFs, which are unique among materials, even other porous ones, and introduce the concept of propagation, which involves the efficient transmission of flexible MOF deformations to the macroscale. Furthermore, we explain how researchers can observe, measure, and induce such effects in MOF composites. Next, we review pioneering first-generation MOF-composite actuators that shapeshift in response to changes in humidity, temperature, pressure, or to other stimuli. Finally, we allude to recent developments, identify remaining R & D hurdles, and suggest future directions in this field., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Pro-gram/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). J. T. is grateful to the Spanish Ministry of Universities and the European Union through the Funds Next Generation through grant Maria Zambrano-UAM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stepwise assembly of heterometallic, heteroleptic "triblock Janus-type" metal-organic polyhedra

  • Baeckmann, Cornelia von
  • Ruiz-Relaño, Sara
  • Imaz, Inhar
  • Handke, Marcel
  • Juanhuix, Judith
  • Gándara Barragán, Felipe
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Increasing the chemical complexity of metal-organic cages (MOCs) or polyhedra (MOPs) demands control over the simultaneous organization of diverse organic linkers and metal ions into discrete caged structures. Herein, we show that a pre-assembled complex of the archetypical cuboctahedral MOP can be used as a template to replicate such caged structure, one having a "triblock Janus-type" configuration that is both heterometallic and heteroleptic., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2021 SGR 00458), the CERCA Program/Generalitat de Catalunya, and the MCIN/AEI/10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant SEV-2017-0706). The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). C.v.B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J 4637., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

(Bio)Functionalisation of Metal-Organic Polyhedra by Using Click Chemistry

  • Hernández-López, Laura
  • Baeckmann, Cornelia von
  • Martínez Esaín, Jordi
  • Cortés Martínez, Alba
  • Faraudo, Jordi
  • Caules, Caterina
  • Parella, Teodor
  • Maspoch, Daniel
  • Carné-Sánchez, Arnau
The surface chemistry of Metal-Organic Polyhedra (MOPs) is crucial to their physicochemical properties because it governs how they interact with external substances such as solvents, synthetic organic molecules, metal ions, and even biomolecules. Consequently, the advancement of synthetic methods that facilitate the incorporation of diverse functional groups onto MOP surfaces will significantly broaden the range of properties and potential applications for MOPs. This study describes the use of copper(I)-catalysed, azide-alkyne cycloaddition (CuAAC) click reactions to post-synthetically modify the surface of alkyne-functionalised cuboctahedral MOPs. To this end, a novel Rh(II)-based MOP with 24 available surface alkyne groups was synthesised. Each of the 24 alkyne groups on the surface of the "clickable" Rh-MOP can react with azide-containing molecules at room temperature, without compromising the integrity of the MOP. The wide substrate catalogue and orthogonal nature of CuAAC click chemistry was exploited to densely functionalise MOPs with diverse functional groups, including polymers, carboxylic and phosphonic acids, and even biotin moieties, which retained their recognition capabilities once anchored onto the surface of the MOP., This work was supported by the Spanish MINECO (project RTI2018-095622-B−I00) and the Catalan AGAUR (project 2021 SGR 00458). It was also funded by the CERCA Programme /Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from the “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997) L.H.L acknowledges the support from the Spanish State Research Agency (PRE2019-088056). C.v.B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J 4637. J. F acknowledges the financial support from MCIN/AEI/10.13039/501100011033 agency through Grant PID2021-124297NB-C33 and the “Severo Ochoa” Programme for Centres of Excellence in R\&D (CEX2019-000917-S) awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for Grant 2021SGR01519., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Post-synthetic modification of aerogels made of covalent cross-linked metal-organic polyhedra

  • Khobotov-Bakishev, Akim
  • Samanta, Partha
  • Roztocki, Kornel
  • Albalad, Jorge
  • Royuela, Sergio
  • Furukawa, Shuhei
  • Zamora, Félix
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Aerogels are porous ultralight materials known for their high porosity, wide range of pore sizes, low density, and good macroscopic mechanical properties, all of which make them promising candidates for shaped adsorbents, catalysts, and insulators, among other applications. Here, this work reports a new approach that enables both the formation of modular aerogels, via dynamic covalent chemistry, and their post-synthetic modification, via coordination chemistry. To demonstrate this strategy, this work first polymerizes porous amino-functionalized Rh(II)-based metal-organic polyhedra (MOPs) with aldehydes, which afforded robust imine-gel networks that is then converted into aerogels. Next, this work functionalizes these aerogels through the coordination of ligands on the axial site of Rh(II) paddlewheels of the MOP. Interestingly, in this chemistry, the local changes in the coordination site of the MOPs are transferred to the overall aerogel, thereby altering its macroscopic physicochemical properties. Importantly, this feature enables the synthesis of optimized adsorbents tailored to specific guests, as this work demonstrates through a series of experiments using ligands of different electrostatic and hydrophobic characters., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00, PID2019-106268GB-C32, and TED2021-129886B-C42)), and the Catalan AGAUR (project 2021 SGR 00458). It was also funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997). K.R. gratefully acknowledges the support of the National Science Centre (NCN), Poland (Grants no. 2020/36/C/ST4/00534)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous and meltable metal-organic polyhedra for the generation and shaping of porous mixed-matrix composites

  • Baeckmann, Cornelia von
  • Martínez Esaín, Jordi
  • Suárez, José Antonio
  • Meng, Lingxin
  • Garcia-Masferrer, Joan
  • Faraudo, Jordi
  • Sort, Jordi
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal–organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO2 uptake relative to the parent film., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (projects 2021 SGR 00458 and 2021 SGR 00651), the CERCA Program/Generalitat de Catalunya, the MCIN/AEI/10.13039/501100011033, and by the European Union “NextGenerationEU”/PRTR (EUR2020-112294). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant SEV-2017-0706). The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997). C.v.B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J4637. We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae III. J.F. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 agency through Grant PID2021-124297NB-C33 and the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for Grant 2021SGR01519. L.M. acknowledges the China Scholarship Council for scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

β-Ketoenamine-linked covalent organic frameworks synthesized via gel-to-gel monomer exchange reaction: From aerogel monoliths to electrodes for supercapacitors

  • Martín-Illán, Jesús Á.
  • Sierra, Laura
  • Guillem-Navajas, Ana
  • Suárez, José Antonio
  • Royuela, Sergio
  • Rodríguez-San Miguel, David
  • Maspoch, Daniel
  • Ocón, Pilar
  • Zamora, Félix
Covalent organic frameworks (COFs) possess intrinsic nanoscale pores, limiting mass transport and impacting their utility in many applications, such as catalysis, supercapacitors, and gas storage, demanding efficient diffusion throughout the material. Hierarchical porous structures, integrating larger macropores with inherent micro-/meso-pores, facilitate rapid mass transport. Recently, the fabrication of aerogel monoliths is reported exclusively from imine-linked COFs, offering flexibility in aerogel composition. However, challenges in synthesizing robust β-ketoenamine-based COFs with comparable surface areas prompted innovative synthetic approaches. Leveraging the dynamic nature of COF bonds, in this work efficient monomer exchange from imine to partially β-ketoenamine-linked COFs within the gel phase is demonstrated. These aerogels can be transformed into electrodes using the compression technique. The new flexible electrodes-based β-ketoenamine-linked COF composites with C super P exhibit superior durability and redox activity. Through supercapacitor assembly, the β-ketoenamine-linked COF electrodes outperform their imine-based counterparts, showcasing enhanced capacitance (88 mF cm−2) and stability at high current densities (2.0 mA cm−2). These findings underscore the promise of β-ketoenamine-linked COFs for pseudocapacitor energy storage applications., This work was supported by the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M and CEX2023-001316-M), PDC2022-133498-I00, TED2021-129886B-C42, PID2019-106268GB-C32, PID2022-138908NB-C31, MAT2016-77608-C3-1-P, PCI2018-093081, PID2019-108028GB-C21, and RTI2018-095622-B-I00), and the Catalan AGAUR (project 2017 SGR 238). The authors acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, the Recovery, Transformation, and Resilience Plan, and NextGenerationEU from the European Union. This work was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001316-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recyclable Homogeneous Catalysis Enabled by Dynamic Coordination on Rhodium(II) Axial Sites of Metal-Organic Polyhedra

  • Sánchez-Fuente, Miguel
  • Hernández-López, Laura
  • Maspoch, Daniel
  • Mas-Ballesté, Rubén
  • Carné-Sánchez, Arnau
The activity of catalytic nanoparticles is strongly dependent on their surface chemistry, which controls colloidal stability and substrate diffusion toward catalytic sites. In this work, we studied how the outer surface chemistry of nanostructured Rh(II)-based metal-organic cages or polyhedra (Rh-MOPs) impacts their performance in homogeneous catalysis. Specifically, through post-synthetic coordination of aliphatic imidazole ligands onto the exohedral Rh(II) axial sites of Rh-MOPs, we solubilized a cuboctahedral Rh-MOP in dichloromethane, thereby enabling its use as a homogeneous catalyst. We demonstrated that the presence of the coordinating ligand on the surface of the Rh-MOP does not hinder its catalytic activity in styrene aziridination and cyclopropanation reactions, thanks to the dynamic Rh-imidazole coordination bond. Finally, we used similar ligand exchange post-synthetic reactions to develop a ligand-mediated approach for precipitating the Rh-MOP catalyst, facilitating the recovery and reuse of Rh-MOPs as homogeneous catalysts., M. S.-F. and L. H.-L. contributed equally to this work. This work was supported by the Spanish MINECO (project RTI2018-095622-B−I00, PID2019-110637RB−I00 and PID2022-141016OB−I00) and the Catalan AGAUR (project 2021 SGR 00458). It was also funded by the CERCA Programme/Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from the “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997) L.H.L acknowledges the support from the Spanish State Research Agency (PRE2019-088056). M.S.-F. thanks Ministerio de Ciencia e Innovación for a FPI contract (PRE2020-092295)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Transferring Porosity Across Physical States Using Metal-Organic Cages: Porous Liquids, Glasses, Rubbers, and More

  • Sánchez-Férez, Francisco
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
The development of porous materials that retain tailored porosity across different physical states beyond crystalline solids (e.g., liquid or glassy) could yield new functional materials for diverse applications, yet it remains challenging. To address this, researchers have turned to discrete porous cages such as metal-organic cages (MOCs) and metal-organic polyhedra (MOPs). The organization and physical state of these materials are governed by inter-cage interactions that can be modulated without altering the intrinsic porosity of the individual cages. In this minireview, we highlight how the peripheral functionality of such cages governs their interactions and physical state and explain how it can be harnessed to preserve and transfer porosity across distinct physical states, including liquids, glasses, and rubbers. We conclude by outlining emerging properties and potential applications for the resultant unique porous states., This work was supported by the Spanish MINECO (project RTI2018-095622 − B-I00), the Catalan AGAUR (project 2021 SGR 00458), the CERCA Program/Generalitat de Catalunya, the MCIN/AEI/10.13039/501100011033, and by the European Union “NextGenerationEU”/PRTR (EUR2020-112294). ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.-S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and CNS2024-154427 project financed by MICIU/AEI /10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DNA-Based Networks Formed by Coordination Cross-Linking of DNA with Metal-Organic Polyhedra: From Gels to Aerogels to Hydrogels

  • Hernández-López, Laura
  • Khobotov-Bakishev, Akim
  • Cortés Martínez, Alba
  • Garrido-Ribó, Eduard
  • Samanta, Partha
  • Royuela, Sergio
  • Zamora, Félix
  • Maspoch, Daniel
  • Carné-Sánchez, Arnau
Herein, we introduce a supramolecular method to form DNA-based networks by cross-linking DNA with Rh(II)-based metal-organic polyhedra (MOPs), which entails coordination of DNA to the exohedral Rh(II) axial sites of the MOP. The resultant highly connected networks can then be processed into gels, porous aerogels, or hydrogels, exhibiting properties suitable for pollutant removal and drug release., This work was supported by the Spanish MINECO (project RTI2018-095622–B-I00), the Catalan AGAUR (project 2021 SGR 00458), the CERCA Program/Generalitat de Catalunya, the MCIN/AEI/10.13039/501100011033, and by the European Union “NextGenerationEU”/PRTR (EUR2020-112294). ICN2 is supported by the Severo Ochoa program (grant CEX2021-001214-S) funded by MCIN/AEI/10.13039.501100011033. The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). A.C.-S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997). P.S. thanks the Generalitat de Catalunya for a Beatriu de Pinós fellowship (2022 BP 00085) (Co-funded by EU under the Marie Skłodowska-Curie Actions grant agreement)., CEX2021-001214-S, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Protection strategies for directionally-controlled synthesis of previously inaccessible metal-organic polyhedra (MOPs), The cases of carboxylate: The amino-functionalised Rh(ii)-MOPs

  • Albalad, Jorge|||0000-0001-5850-6723
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Grancha, Thais|||0000-0001-9591-1058
  • Hernández López, Laura|||0000-0001-6394-2538
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we report that strategic use of protecting groups in coordination reactions enables directional inhibition that leads to synthesis of highly functionalised metal-organic polyhedra (MOPs), rather than of the extended coordination networks. Using this approach, we functionalised two new porous cuboctahedral Rh(ii)-based MOPs with 24 peripheral carboxylic acid groups or 24 peripheral amino groups.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Geometry Mismatch and Reticular Chemistry, Strategies to Assemble Metal-Organic Frameworks with Non-default Topologies

  • Guillerm, Vincent|||0000-0003-3460-223X
  • Maspoch, Daniel|||0000-0003-1325-9161
The past 20 years have witnessed tremendous advances in the field of porous materials, including the development of novel metal-organic frameworks (MOFs) that show great potential for practical applications aimed at addressing global environmental and industrial challenges. A critical tool enabling this progress has been reticular chemistry, through which researchers can design materials that exhibit highly regular (i.e., edge-transitive) topologies, based on the assembly of geometrically matched building blocks into specific nets. However, innovation sometimes demands that researchers steer away from default topologies to instead pursue unusual geometries. In this Perspective, we cover this aspect and introduce the concept of geometry mismatch, in which seemingly incompatible building blocks are combined to generate non-default structures. We describe diverse MOF assemblies built through geometry mismatch generated by use of ligand bend angles, twisted functional groups, zigzag ligands and other elements, focusing on carboxylate-based MOFs combined with common inorganic clusters. We aim to provide a fresh perspective on rational design of MOFs and to help readers understand the countless options now available to achieve greater structural complexity in MOFs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phase Transfer of Rhodium(II)-Based Metal-Organic Polyhedra Bearing Coordinatively Bound Cargo Enables Molecular Separation

  • Grancha, Thais|||0000-0001-9591-1058
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Hernández López, Laura|||0000-0001-6394-2538
  • Albalad, Jorge|||0000-0001-5850-6723
  • Imaz, Inhar|||0000-0002-0278-1141
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
The transfer of nanoparticles between immiscible phases can be driven by externally triggered changes in their surface composition. Interestingly, phase transfers can enhance the processing of nanoparticles and enable their use as vehicles for transporting molecular cargo. Herein we report extension of such phase transfers to encompass porous metal-organic polyhedra (MOPs). We report that a hydroxyl-functionalized, cuboctahedral Rh(II)-based MOP can be transferred between immiscible phases by pH changes or by cation-exchange reactions. We demonstrate use of this MOP to transport coordinatively bound cargo between immiscible layers, including into solvents in which the cargo is insoluble. As proof-of-concept that our phase-transfer approach could be used in chemical separation, we employed Rh(II)-based MOPs to separate a challenging mixture of structurally similar cyclic aliphatic (tetrahydrothiophene) and aromatic (thiophene) compounds. We anticipate that transport of coordinatively bound molecules will open new avenues for molecular separation based on the relative coordination affinity that the molecules have for the Rh(II) sites of MOP.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrathin films of porous metal-organic polyhedra for gas separation

  • Andrés, Miguel A.|||0000-0003-3691-3437
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Sanchez-Lainez, Javier|||0000-0001-6627-0079
  • Roubeau, Olivier|||0000-0003-2095-5843
  • Coronas, Joaquin|||0000-0003-1512-4500
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Gascón, Ignacio|||0000-0002-3492-6456
Ultrathin films of a robust Rh-based porous metal-organic polyhedra (MOP) have been obtained. Homogeneous and compact monolayer films (ca. 2.5 nm thick) were first formed at the air-water interface, deposited onto different substrates and characterized using spectroscopic methods, scanning transmission electron microscopy and atomic force microscopy. As a proof of concept, the gas separation performance of MOP-supported membranes has also been evaluated. Selective MOP ultrathin films (thickness ca. 60 nm) exhibit remarkable CO permeance and CO/N selectivity, demonstrating the great combined potential of MOP and Langmuir-based techniques in separation technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

MOF-Beads Containing Inorganic Nanoparticles for the Simultaneous Removal of Multiple Heavy Metals from Water

  • Boix, Gerard|||0000-0001-8431-4813
  • Troyano, Javier|||0000-0002-0213-8148
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Camur, Ceren|||0000-0002-4475-0511
  • Bermejo, Natalia
  • Yazdi, Amirali|||0000-0001-9420-8504
  • Piella, Jordi|||0000-0002-5788-3145
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Pollution of water with heavy metals is a global environmental problem whose impact is especially severe in developing countries. Among water-purification methods, adsorption of heavy metals has proven to be simple, versatile, and cost-effective. However, there is still a need to develop adsorbents with a capacity to remove multiple metal pollutants from the same water sample. Herein, we report the complementary adsorption capacities of metal-organic frameworks (here, UiO-66 and UiO-66-(SH)) and inorganic nanoparticles (iNPs; here, cerium-oxide NPs) into composite materials. These adsorbents, which are spherical microbeads generated in one step by continuous-flow spray-drying, efficiently and simultaneously remove multiple heavy metals from water, including As(III and V), Cd(II), Cr(III and VI), Cu(II), Pb(II), and Hg(II). We further show that these microbeads can be used as a packing material in a prototype of a continuous-flow water treatment system, in which they retain their metal-removal capacities upon regeneration with a gentle acidic treatment. As proof-of-concept, we evaluated these adsorbents for purification of laboratory water samples prepared to independently recapitulate each of two strongly polluted rivers: the Bone (Indonesia) and Buringanga (Bangladesh) rivers. In both cases, our microbeads reduced the levels of all the metal contaminants to below the corresponding permissible limits established by the World Health Organization (WHO). Moreover, we demonstrated the capacity of these microbeads to lower levels of Cr(VI) in a water sample collected from the Sarno River (Italy). Finally, to create adsorbents that could be magnetically recovered following their use in water purification, we extended our spray-drying technique to simultaneously incorporate two types of iNPs (CeO and FeO) into UiO-66-(SH), obtaining CeO/FeO@UiO-66-(SH) microbeads that adsorb heavy metals and are magnetically responsive.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Molecular Approach for Engineering Interfacial Interactions in Magnetic/Topological Insulator Heterostructures, A Molecular Approach for Engineering Interfacial Interactions in Magnetic-Topological Insulator Heterostructures

  • González Cuxart, Marc|||0000-0002-9085-1225
  • Valbuena, Miguel Ángel|||0000-0002-0585-5636
  • Robles, Roberto|||0000-0001-7808-0395
  • Moreno, Cesar|||0000-0003-2682-211X
  • Bonell, Frédéric|||0000-0001-7296-0404
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Imaz, Inhar|||0000-0002-0278-1141
  • Xu, Heng
  • Nistor, Corneliu
  • Barla, Alessandro|||0000-0002-5632-4915
  • Gargiani, Pierluigi|||0000-0002-6649-0538
  • Valvidares, Manuel|||0000-0003-4895-8114
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Gambardella, Pietro|||0000-0003-0031-9217
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
  • Mugarza, Aitor|||0000-0002-2698-885X
Controlling interfacial interactions in magnetic/topological insulator heterostructures is a major challenge for the emergence of novel spin-dependent electronic phenomena. As for any rational design of heterostructures that rely on proximity effects, one should ideally retain the overall properties of each component while tuning interactions at the interface. However, in most inorganic interfaces, interactions are too strong, consequently perturbing, and even quenching, both the magnetic moment and the topological surface states at each side of the interface. Here, we show that these properties can be preserved using ligand chemistry to tune the interaction of magnetic ions with the surface states. By depositing Co-based porphyrin and phthalocyanine monolayers on the surface of BiTe thin films, robust interfaces are formed that preserve undoped topological surface states as well as the pristine magnetic moment of the divalent Co ions. The selected ligands allow us to tune the interfacial hybridization within this weak interaction regime. These results, which are in stark contrast with the observed suppression of the surface state at the first quintuple layer of BiSe induced by the interaction with Co phthalocyanines, demonstrate the capability of planar metal-organic molecules to span interactions from the strong to the weak limit.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Heterogeneous catalysts with programmable topologies generated by reticulation of organocatalysts into metal-organic frameworks, The case of squaramide

  • Broto-Ribas, Anna|||0000-0002-9672-4526
  • Vignatti Abellan, Claudia|||0000-0003-3462-0251
  • Jiménez Almarza, Alicia|||0000-0001-6304-0200
  • Luis-Barrera, Javier
  • Dolatkhah, Zahra
  • Gándara, Felipe|||0000-0002-1671-6260
  • Imaz, Inhar|||0000-0002-0278-1141
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Maspoch, Daniel|||0000-0003-1325-9161
A well-established strategy to synthesize heterogeneous, metal-organic framework (MOF) catalysts that exhibit nanoconfinement effects, and specific pores with highly-localized catalytic sites, is to use organic linkers containing organocatalytic centers. Here, we report that by combining this linker approach with reticular chemistry, and exploiting three-dimensioanl (3D) MOF-structural data from the Cambridge Structural Database, we have designed four heterogeneous MOF-based catalysts for standard organic transformations. These programmable MOFs are isoreticular versions of pcu IRMOF-16, fcu UiO-68 and pillared-pcu SNU-8X, the three most common topologies of MOFs built from the organic linker p,p'-terphenyldicarboxylic acid (tpdc). To synthesize the four squaramide-based MOFs, we designed and synthesized a linker, 4,4'-((3,4-dioxocyclobut-1-ene-1,2-diyl)bis(azanedyil))dibenzoic acid (Sq_tpdc), which is identical in directionality and length to tpdc but which contains organocatalytic squaramide centers. Squaramides were chosen because their immobilization into a framework enhances its reactivity and stability while avoiding any self-quenching phenomena. Therefore, the four MOFs share the same organocatalytic squaramide moiety, but confine it within distinct pore environments. We then evaluated these MOFs as heterogeneous H-bonding catalysts in organic transformations: a Friedel-Crafts alkylation and an epoxide ring-opening. Some of them exhibited good performance in both reactions but all showed distinct catalytic profiles that reflect their structural differences.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Template-free, surfactant-mediated orientation of self-assembled supercrystals of metal-organic framework particles

  • Avci, Civan|||0000-0001-7202-7454
  • Liu, Yang
  • Pariente, Jose Angel|||0000-0003-2649-9164
  • Blanco, Alvaro|||0000-0002-0015-4873
  • Lopez, Cefe
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Mesoscale self-assembly of particles into supercrystals is important for the design of functional materials such as photonic and plasmonic crystals. However, while much progress has been made in self-assembling supercrystals adopting diverse lattices and using different types of particles, controlling their growth orientation on surfaces has received limited success. Most of the latter orientation control has been achieved via templating methods in which lithographic processes are used to form a patterned surface that acts as a template for particle assembly. Herein, a template-free method to self-assemble (111)-, (100)-, and (110)-oriented face-centered cubic supercrystals of the metal-organic framework ZIF-8 particles by adjusting the amount of surfactant (cetyltrimethylammonium bromide) used is described. It is shown that these supercrystals behave as photonic crystals whose properties depend on their growth orientation. This control on the orientation of the supercrystals dictates the orientation of the composing porous particles that might ultimately facilitate pore orientation on surfaces for designing membranes and sensors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Green synthesis of imine-based covalent organic frameworks in water

  • Martín-Illán, Jesús A.
  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Franco, Carlos|||0000-0003-3385-2851
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Zamora, Félix|||0000-0001-7529-5120
Dynamic covalent bonds have been advantageously used to direct the synthesis of crystalline porous covalent organic frameworks (COFs). Unlike the standard synthetic protocols that involve harsh conditions, this work provides a high-yield "one-pot"green synthesis of imine-based COFs in water. Additionally, this aqueous synthesis can be performed under microwave conditions, considerably reducing the reaction time.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Net-clipping, an approach to deduce the topology of metal-organic frameworks built with zigzag ligands

  • Ortín-Rubio, Borja|||0000-0002-0533-3635
  • Ghasempour, Hosein
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Morsali, Ali|||0000-0002-1828-7287
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we propose a new approach for deducing the topology of metal-organic frameworks (MOFs) assembled from organic ligands of low symmetry, which we call net-clipping. It is based on the construction of nets by rational deconstruction of edge-transitive nets comprising higher-connected molecular building blocks (MBBs). We have applied net-clipping to predict the topologies of MOFs containing zigzag ligands. To this end, we derived 2-connected (2-c) zigzag ligands from 4-c square-like MBBs by first splitting the 4-c nodes into two 3-c nodes and then clipping their two diagonally connecting groups. We demonstrate that, when this approach is applied to the 17 edge-transitive nets containing square-like 4-c MBBs, net-clipping leads to generation of 10 nets with different underlying topologies. Moreover, we report that literature and experimental research corroborate successful implementation of our approach. As proof-of-concept, we employed net-clipping to form three new MOFs built with zigzag ligands, each of which exhibits the deduced topology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spray-drying synthesis of MOFs, COFs, and related composites

  • Troyano, Javier|||0000-0002-0213-8148
  • Camur, Ceren|||0000-0002-4475-0511
  • Garzon-Tovar, Luis|||0000-0003-0253-4041
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Conspectus: Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) are among the most attractive porous materials today. They exhibit outstanding porosity for countless applications such as gas storage, CO2 capture, gas separation, sensing, drug delivery, and catalysis. Moreover, researchers have recently begun to combine MOFs or COFs with other functional materials to obtain composites that boast the respective strengths, and mitigate the respective weaknesses, of each component, enabling enhanced performance in many of the aforementioned applications. Accordingly, development of methods for fabrication of MOFs, COFs, and related composites is important for facilitating adoption of these materials in industry. One promising synthetic technique is spray-drying, which is already well-integrated in manufacturing processes for diverse sectors. It enables rapid, continuous and scalable production of dry microspherical powders in a single step, leading to lower fabrication costs and shorter production times compared to traditional methods.In this Account, we outline our ongoing work on spray-drying synthesis of crystalline porous MOFs, COFs, and related composites. Versatile and tunable, spray-drying can be adapted to perform reactions involving coordination and covalent chemistry for the synthesis of micrometer spherical beads/superstructures of MOFs and COFs. Likewise, MOF- and COF-based composites can be synthesized using similar conditions as those for pure MOFs or COFs, through the simple introduction of additional functional materials into the feed precursor solution or colloid. Interestingly, spray-drying can also be done in water, thus providing the basis for its use as a scalable green method for industrial fabrication of these materials. To date, spray-drying has already been scaled up for pilot production (kilogram scale) of MOFs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dynamic porous coordination polymers built-up from flexible 4,4'-dithiodibenzoate and rigid N-based ligands

  • Jarrah, Najmeh
  • Troyano, Javier|||0000-0002-0213-8148
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Imaz, Inhar|||0000-0002-0278-1141
  • Tangestaninejad, Shahram
  • Moghadam, Majid
  • Maspoch, Daniel|||0000-0003-1325-9161
Herein we report the design, synthesis, structural characterisation and functional testing of a series of Cu(ii) coordination polymers containing flexible 4,4'-dithiodibenzoate ligand (4,4'-DTBA), with or without auxiliary N-donor ligands. Reaction of Cu(ii) with 4,4'-DTBA yielded a 1D coordination polymer (1) based on Cu(ii) paddlewheel units connected by 4,4'-DTBA, to form cyclic loop chains with intramolecular voids that exhibit reversible structural transformations upon subsequent solvent exchange in methanol to afford a new, crystalline, permanently-porous structure (1'). However, when the same reaction was run with pyridine, it formed a porous 2D coordination polymer (2). We have attributed the difference in dimensionality seen in the two products to the coordination of pyridine on the axial site of the Cu(ii) paddle-wheel, which forces flexible 4,4'-DTBA to adopt a different conformation. Reactions in the presence of 4,4'-bipyridine (4,4'-bpy) afforded two new, flexible, 2D coordination polymers (3 4). Lower concentrations of 4,4'-bpy afforded a structure (3) built from 1D chains analogous to those in 1 and connected through 4,4'-bpy linkers coordinated to the axial positions. Interestingly, 3 showed reversible structural transformations triggered by either solvent exchange or thermal treatment, each of which yielded a new crystalline and permanently porous phase (3'). Finally, use of higher concentrations of 4,4'-bpy led to a coordination polymer (4) based on a distorted CuO3N2 trigonal bipyramid, rather than on the Cu(ii) paddlewheel. The connection of these motifs by 4,4'-DTBA resulted in a zig-zag 1D chain connected through 4,4'-bpy ligands to form a porous 2D network. Interestingly, 4 also underwent reversible thermal transformation to yield a microporous coordination polymer (4').
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of polycarboxylate rhodium(II) metal-organic polyhedra (MOPs) and their use as building blocks for highly connected metal-organic frameworks (MOFs)

  • Grancha, Thais|||0000-0001-9591-1058
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Zarekarizi, Farnoosh
  • Hernández López, Laura|||0000-0001-6394-2538
  • Albalad, Jorge|||0000-0001-5850-6723
  • Khobotov Bakishev, Akim|||0000-0002-6119-959X
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Morsali, Ali|||0000-0002-1828-7287
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Gándara, Felipe|||0000-0002-1671-6260
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Use of preformed metal-organic polyhedra (MOPs) as supermolecular building blocks (SBBs) for the synthesis of metal-organic frameworks (MOFs) remains underexplored due to lack of robust functionalized MOPs. Herein we report the use of polycarboxylate cuboctahedral Rh-MOPs for constructing highly-connected MOFs. Cuboctahedral MOPs were functionalized with carboxylic acid groups on their 12 vertices or 24 edges through coordinative or covalent post-synthetic routes, respectively. We then used each isolated polycarboxylate Rh-MOP as 12-c cuboctahedral or 24-c rhombicuboctahedral SBBs that, upon linkage with metallic secondary building units (SBUs), afford bimetallic highly-connected MOFs. The assembly of a pre-synthesized 12-c SBB with a 4-c paddle-wheel SBU, and a 24-c SBB with a 3-c triangular Cu SBU gave rise to bimetallic MOFs having ftw (4,12)-c or rht (3,24)-c topologies, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Millimeter-shaped metal-organic framework/inorganic nanoparticle composite as a new adsorbent for home water-purification filters

  • Boix, Gerard|||0000-0001-8431-4813
  • Han, Xu|||0000-0001-8319-8830
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Heavy-metal contamination of water is a global problem with an especially severe impact in countries with old or poorly maintained infrastructure for potable water. An increasingly popular solution for ensuring clean and safe drinking water in homes is the use of adsorption-based water filters, given their affordability, efficacy, and simplicity. Herein, we report the preparation and functional validation of a new adsorbent for home water filters, based on our metal-organic framework (MOF) composite containing UiO-66 and cerium(IV) oxide (CeO2) nanoparticles. We began by preparing CeO2@UiO-66 microbeads and then encapsulating them in porous polyethersulfone (PES) granules to obtain millimeter-scale CeO2@UiO-66@PES granules. Next, we validated these granules as an adsorbent for the removal of metals from water by substituting them for the standard adsorbent (ion-exchange resin spheres) inside a commercially available water pitcher from Brita. We assessed their performance according to the American National Standards Institute (ANSI) guideline 53-2019, "Drinking Water Treatment Units - Health Effects Standard". Remarkably, a pitcher loaded with a combination of our CeO2@UiO-66@PES granules and activated carbon at standard ratios met the target reduction thresholds set by NSF/ANSI 53-2019 for all the metals tested: As(III), As(V), Cd(II), Cr(III), Cr(VI), Cu(II), Hg(II), and Pb(II). Throughout the test, the modified pitcher proved to be robust and stable. We are confident that our findings will bring MOF-based adsorbents one step closer to real-world use.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Steric hindrance in metal coordination drives the separation of pyridine regioisomers using rhodium(II)-based metal-organic polyhedra

  • Hernández López, Laura|||0000-0001-6394-2538
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Grancha, Thais|||0000-0001-9591-1058
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Maspoch, Daniel|||0000-0003-1325-9161
The physicochemical similarity of isomers makes their chemical separation through conventional techniques energy intensive. Herein, we report that, instead of using traditional encapsulation-driven processes, steric hindrance in metal coordination on the outer surface of Rh-based metal-organic polyhedra (Rh-MOPs) can be used to separate pyridine-based regioisomers via liquid-liquid extraction. Through molecular dynamics simulations and wet experiments, we discovered that the capacity of pyridines to coordinatively bind to Rh-MOPs is determined by the positions of the pyridine substituents relative to the pyridine nitrogen and is influenced by steric hindrance. Thus, we exploited the differential solubility of bound and non-bound pyridine regioisomers to engineer liquid-liquid self-sorting systems. As a proof of concept, we separated four different equimolecular mixtures of regioisomers, including a mixture of the industrially relevant compounds 2-chloropyridine and 3-chloropyridine, isolating highly pure compounds in all cases.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Assembly of colloidal clusters driven by the polyhedral shape of metal-organic framework particles

  • Liu, Yang
  • Wang, Jiemin
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Control of the assembly of colloidal particles into discrete or higher-dimensional architectures is important for the design of myriad materials, including plasmonic sensing systems and photonic crystals. Here, we report a new approach that uses the polyhedral shape of metal-organic-framework (MOF) particles to direct the assembly of colloidal clusters. This approach is based on controlling the attachment of a single spherical polystyrene particle on each face of a polyhedral particle via colloidal fusion synthesis, so that the polyhedral shape defines the final coordination number, which is equal to the number of faces, and geometry of the assembled colloidal cluster. As a proof of concept, we assembled six-coordinated (6-c) octahedral and 8-c cubic clusters using cubic ZIF-8 and octahedral UiO-66 core particles. Moreover, we extended this approach to synthesize a highly coordinated 12-c cuboctahedral cluster from a rhombic dodecahedral ZIF-8 particle. We anticipate that the synthesized colloidal clusters could be further evolved into spherical core-shell MOF@polystyrene particles under conditions that promote a higher fusion degree, thus expanding the methods available for the synthesis of MOF-polymer composites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal-Organic Polyhedra as Building Blocks for Porous Extended Networks

  • Khobotov Bakishev, Akim|||0000-0002-6119-959X
  • Hernández López, Laura|||0000-0001-6394-2538
  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Albalad, Jorge|||0000-0001-5850-6723
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic polyhedra (MOPs) are a subclass of coordination cages that can adsorb and host species in solution and are permanently porous in solid-state. These characteristics, together with the recent development of their orthogonal surface chemistry and the assembly of more stable cages, have awakened the latent potential of MOPs to be used as building blocks for the synthesis of extended porous networks. This review article focuses on exploring the key developments that make the extension of MOPs possible, highlighting the most remarkable examples of MOP-based soft materials and crystalline extended frameworks. Finally, the article ventures to offer future perspectives on the exploitation of MOPs in fields that still remain ripe toward the use of such unorthodox molecular porous platforms.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultralarge Free-Standing Imine-Based Covalent Organic Framework Membranes Fabricated via Compression

  • Martín-Illán, Jesús Á.|||0000-0003-4069-0977
  • Suárez, José Antonio
  • Gómez-Herrero, Julio
  • Ares, Pablo
  • Gallego-Fuente, Daniel
  • Cheng, Youdong
  • Zhao, Dan
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Zamora, Félix|||0000-0001-7529-5120
Demand continues for processing methods to shape covalent organic frameworks (COFs) into macroscopic objects that are needed for their practical applications. Herein, a simple compression method to prepare large-scale, free-standing homogeneous and porous imine-based COF-membranes with dimensions in the centimeter range and excellent mechanical properties is reported. This method entails the compression of imine-based COF-aerogels, which undergo a morphological change from an elastic to plastic material. The COF-membranes fabricated upon compression show good performances for the separation of gas mixtures of industrial interest, N2/CO2 and CH4/CO2. It is believed that the new procedure paves the way to a broader range of COF-membranes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multicomponent, Functionalized HKUST-1 Analogues Assembled via Reticulation of Prefabricated Metal-Organic Polyhedral Cavities

  • Khobotov Bakishev, Akim|||0000-0002-6119-959X
  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Ortín-Rubio, Borja|||0000-0002-0533-3635
  • Hernández López, Laura|||0000-0001-6394-2538
  • Cortés-Martínez, Alba|||0000-0003-1679-5955
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Gándara, Felipe|||0000-0002-1671-6260
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Platero-Prats, Ana Eva|||0000-0002-2248-2739
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic frameworks (MOFs) assembled from multiple building blocks exhibit greater chemical complexity and superior functionality in practical applications. Herein, we report a new approach based on using prefabricated cavities to design isoreticular multicomponent MOFs from a known parent MOF. We demonstrate this concept with the formation of multicomponent HKUST-1 analogues, using a prefabricated cavity that comprises a cuboctahedral Rh(II) metal-organic polyhedron functionalized with 24 carboxylic acid groups. The cavities are reticulated in three dimensions via Cu(II)-paddlewheel clusters and (functionalized) 1,3,5-benzenetricarboxylate linkers to form three- and four-component HKUST-1 analogues.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Clip-off Chemistry, Synthesis by Programmed Disassembly of Reticular Materials

  • Yang, Yunhui|||0000-0002-6007-2335
  • Broto-Ribas, Anna|||0000-0002-9672-4526
  • Ortín-Rubio, Borja|||0000-0002-0533-3635
  • Imaz, Inhar|||0000-0002-0278-1141
  • Gándara, Felipe|||0000-0002-1671-6260
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Jurado Moreno, Sergio
  • Busqué, Félix|||0000-0001-7566-4264
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
Bond breaking is an essential process in chemical transformations and the ability of researchers to strategically dictate which bonds in a given system will be broken translates to greater synthetic control. Here, we report extending the concept of selective bond breaking to reticular materials in a new synthetic approach that we call Clip-off Chemistry. We show that bond-breaking in these structures can be controlled at the molecular level; is periodic, quantitative, and selective; is effective in reactions performed in either solid or liquid phases; and can occur in a single-crystal-to-single-crystal fashion involving the entire bulk precursor sample. We validate Clip-off Chemistry by synthesizing two topologically distinct 3D metal-organic frameworks (MOFs) from two reported 3D MOFs, and a metal-organic macrocycle from metal-organic polyhedra (MOP). Clip-off Chemistry opens the door to the programmed disassembly of reticular materials and thus to the design and synthesis of new molecules and materials. Clip-off Chemistry, a new approach to synthesizing molecules and materials based on the programmed de-reticulation and controlled etching at the molecular level in reticular materials, is introduced. Using this strategy, we have transformed two 3D metal-organic frameworks (MOFs) into two topologically distinct 3D MOFs, and one metal-organic polyhedra into a metal-organic macrocycle.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

pH-triggered removal of nitrogenous organic micropollutants from water by using metal-organic polyhedra

  • Hernández López, Laura|||0000-0001-6394-2538
  • Cortés-Martínez, Alba|||0000-0003-1679-5955
  • Parella Coll, Teodor|||0000-0002-1914-2709
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Water pollution threatens human and environmental health worldwide. Thus, there is a pressing need for new approaches to water purification. Herein, we report a novel supramolecular strategy based on the use of a metal-organic polyhedron (MOP) as a capture agent to remove nitrogenous organic micropollutants from water, even at very low concentrations (ppm), based exclusively on coordination chemistry at the external surface of the MOP. Specifically, we exploit the exohedral coordination positions of Rh-MOP to coordinatively sequester pollutants bearing N-donor atoms in aqueous solution, and then harness their exposed surface carboxyl groups to control their aqueous solubility through acid/base reactions. We validated this approach for removal of benzotriazole, benzothiazole, isoquinoline, and 1-napthylamine from water.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface chemistry of metal-organic polyhedra

  • Albalad, Jorge|||0000-0001-5850-6723
  • Hernández López, Laura|||0000-0001-6394-2538
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic polyhedra (MOPs) are discrete, intrinsically-porous architectures that operate at the molecular regime and, owing to peripheral reactive sites, exhibit rich surface chemistry. Researchers have recently exploited this reactivity through post-synthetic modification (PSM) to generate specialised molecular platforms that may overcome certain limitations of extended porous materials. Indeed, the combination of modular solubility, orthogonal reactive sites, and accessible cavities yields a highly versatile molecular platform for solution to solid-state applications. In this feature article, we discuss representative examples of the PSM chemistry of MOPs, from proof-of-concept studies to practical applications, and highlight future directions for the MOP field.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Antibacterial films based on MOF composites that release iodine passively or upon triggering by near-infrared light

  • Han, Xu|||0000-0001-8319-8830
  • Boix, Gerard|||0000-0001-8431-4813
  • Balcerzak, Mateusz
  • Moriones, Oscar Hernando|||0000-0003-0310-0210
  • Cano-Sarabia, Mary|||0000-0003-4254-8157
  • Cortés Garmendia, M. Pilar|||0000-0002-5924-0653
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
  • Llagostera Casas, Montserrat|||0000-0001-8177-8321
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Multidrug-resistant bacteria have become a global health problem for which new prophylactic strategies are now needed, including surface-coatings for hospital spaces and medical equipment. This work reports the preparation and functional validation of a metal-organic framework (MOF) based composite for the triggered controlled release of iodine, an antimicrobial element that does not generate resistance. It comprises beads of the iodophilic MOF UiO-66 containing encapsulated gold nanorods (AuNRs) coated with a silica shell. Irradiation of the AuNRs with near-infrared light (NIR) provokes a photothermal effect and the resultant heat actively liberates the iodine. After validating the performance of this composite, it is integrated into a polymer for the development of antibacterial films. This work assesses the adsorption of iodine into these composite films, as well as its passive long-term release and active light-triggered. Finally, this work validates the antibacterial activity of the composite films in vitro against gram-positive and gram-negative bacteria. The findings will surely inform the development of new prophylactic treatments.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coloration in supraparticles assembled from polyhedral metal-organic framework particles

  • Wang, Junwei|||0000-0002-9062-8736
  • Liu, Yang
  • Bleyer, Gudrun
  • Goerlitzer, Eric S. A.|||0000-0003-4088-929X
  • Englisch, Silvan
  • Przybilla, Thomas
  • Mbah Chrameh, Fru
  • Engel, Michael|||0000-0002-7031-3825
  • Spiecker, Erdmann
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Vogel, Nicolas|||0000-0002-9831-6905
Supraparticles are spherical colloidal crystals prepared by confined self-assembly processes. A particularly appealing property of these microscale structures is the structural color arising from interference of light with their building blocks. Here, we assemble supraparticles with high structural order that exhibit coloration from uniform, polyhedral metal-organic framework (MOF) particles. We analyse the structural coloration as a function of the size of these anisotropic building blocks and their internal structure. We attribute the angle-dependent coloration of the MOF supraparticles to the presence of ordered, onion-like layers at the outermost regions. Surprisingly, even though different shapes of the MOF particles have different propensities to form these onion layers, all supraparticle dispersions show well-visible macroscopic coloration, indicating that local ordering is sufficient to generate interference effects.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Perspectives for polychlorinated trityl radicals

  • Ratera Bastardas, Imma|||0000-0002-1464-9789
  • Vidal-Gancedo, José|||0000-0002-1853-9675
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Bromley, Stefan|||0000-0002-7037-0475
  • Crivillers, Núria|||0000-0001-6538-2482
  • Mas-Torrent, Marta|||0000-0002-1586-005X
An organic free radical is a molecule with one or more unpaired electrons. Although most free radicals are highly reactive, chemists have developed a few families of so-called persistent organic radicals with high kinetic stabilities. Polychlorinated trityl radicals, also known as polychlorotriphenylmethyl (PTM) radicals, are particularly chemically stable due to the high steric hindrance provided by the chlorine atoms in ortho positions which protect their single unpaired electron localised on the central carbon atom. In addition to their inherent magnetic spin due to the unpaired electron, PTMs exhibit other appealing properties such as a rich electrochemistry and characteristic optical properties (absorption and emission). Moreover, it has been shown that these properties can be tuned through the preparation of a large library of PTM-based derivatives. Here, we review recent developments employing PTM radicals, which include their implementation in molecular electronic junctions/switches, as building blocks for the preparation of magnetic networks and opto-electronic devices/materials and their exploitation in bio-applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Propagating MOF flexibility at the macroscale, the case of MOF-based mechanical actuators

  • Troyano, Javier|||0000-0002-0213-8148
  • Maspoch, Daniel|||0000-0003-1325-9161
Shapeshifting materials have captured the imagination of researchers for their myriad potential applications, yet their practical development remains challenging. These materials operate by mechanical actuation: their structural responses to external stimuli generate mechanical work. Here, we review progress on the use of flexible metal-organic frameworks (MOFs) in composite actuators that shapeshift in a controlled fashion. We highlight the dynamic behaviour of flexible MOFs, which are unique among materials, even other porous ones, and introduce the concept of propagation, which involves the efficient transmission of flexible MOF deformations to the macroscale. Furthermore, we explain how researchers can observe, measure, and induce such effects in MOF composites. Next, we review pioneering first-generation MOF-composite actuators that shapeshift in response to changes in humidity, temperature, pressure, or to other stimuli. Finally, we allude to recent developments, identify remaining R & D hurdles, and suggest future directions in this field.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of the surface chemistry of metal-organic polyhedra in their assembly into ultrathin films for gas separation

  • Tejedor, Inés|||0000-0002-8267-9306
  • Andrés, Miguel A.|||0000-0003-3691-3437
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Arjona, Mónica
  • Pérez-Miana, Marta
  • Sanchez-Lainez, Javier|||0000-0001-6627-0079
  • Coronas, Joaquin|||0000-0003-1512-4500
  • Fontaine, Philippe|||0000-0003-3394-6508
  • Goldmann, Michel
  • Roubeau, Olivier|||0000-0003-2095-5843
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Gascón, Ignacio|||0000-0002-3492-6456
The formation of ultrathin films of Rh-based porous metal-organic polyhedra (Rh-MOPs) by the Langmuir-Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air-water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)and HRhMOP(oiz)) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air-liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO/Nseparation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal-organic frameworks, why make them small?

  • Wang, Jiemin
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Recent studies have demonstrated that metal-organic frameworks (MOFs) can be miniaturized down to the submicroscale and even nanoscale to create small MOFs. Herein, the basic concepts and recent progresses concerning the core question of "MOFs, why make them small?" are briefly introduced from three perspectives: those of size, shape, and processability. Small sizes endow MOFs with large outer surface area/volume ratios, leading to important differences in their characteristics (e.g., outer surface energy, number of defects, etc.) relative to their bulk scale counterparts and thus, opening the door to size-dependent properties such as flexibility or catalytic performance. Downsizing MOFs also enables shaping of them into unusual shapes. Among the most appealing morphologies are 2D nanosheets, whose structure can favor certain porosity-related applications. The controlled miniaturization of MOF particles also favors their integration onto surfaces and into devices as well as their colloidal stability, which in turn translates to the ability to use readily processable MOF-based liquids in countless processes, such as to drive the assembly of sophisticated meso- and macroscopic architectures, gels, monoliths, and porous liquids. It is believed that ongoing research to shrink MOFs via nanotechnology, as has been done with other classes of materials, will continue to yield novel MOF-related materials that exhibit unprecedented structural and functional properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enzyme-Powered Porous Micromotors Built from a Hierarchical Micro- And Mesoporous UiO-Type Metal-Organic Framework

  • Yang, Yunhui|||0000-0002-6007-2335
  • Arqué, Xavier
  • Patiño, Tania|||0000-0001-9979-7926
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Blersch, Pascal Raphael
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Sánchez Ordóñez, Samuel|||0000-0001-9713-9997
Here, we report the design, synthesis, and functional testing of enzyme-powered porous micromotors built from a metal-organic framework (MOF). We began by subjecting a presynthesized microporous UiO-type MOF to ozonolysis, to confer it with mesopores sufficiently large to adsorb and host the enzyme catalase (size: 6-10 nm). We then encapsulated catalase inside the mesopores, observing that they are hosted in those mesopores located at the subsurface of the MOF crystals. In the presence of H2O2 fuel, MOF motors (or MOFtors) exhibit jet-like propulsion enabled by enzymatic generation of oxygen bubbles. Moreover, thanks to their hierarchical pore system, the MOFtors retain sufficient free space for adsorption of additional targeted species, which we validated by testing a MOFtor for removal of rhodamine B during self-propulsion.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stepwise assembly of heterometallic, heteroleptic "triblock Janus-type" metal-organic polyhedra

  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Ruiz Relaño, Sara
  • Imaz, Inhar|||0000-0002-0278-1141
  • Handke, Marcel|||0000-0003-3364-9204
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Gándara, Felipe|||0000-0002-1671-6260
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Increasing the chemical complexity of metal-organic cages (MOCs) or polyhedra (MOPs) demands control over the simultaneous organization of diverse organic linkers and metal ions into discrete caged structures. Herein, we show that a pre-assembled complex of the archetypical cuboctahedral MOP can be used as a template to replicate such caged structure, one having a "triblock Janus-type" configuration that is both heterometallic and heteroleptic. We present a novel strategy to assemble diverse metal ions and organic linkers into metal-organic polyhedra (MOPs). It involves use of a pre-assembled complex of a parent MOP to replicate this cage with a multicomponent character.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

(Bio)Functionalisation of Metal-Organic Polyhedra by Using Click Chemistry

  • Hernández López, Laura|||0000-0001-6394-2538
  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Cortés-Martínez, Alba|||0000-0003-1679-5955
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Caules, Caterina
  • Parella Coll, Teodor|||0000-0002-1914-2709
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
The surface chemistry of Metal-Organic Polyhedra (MOPs) is crucial to their physicochemical properties because it governs how they interact with external substances such as solvents, synthetic organic molecules, metal ions, and even biomolecules. Consequently, the advancement of synthetic methods that facilitate the incorporation of diverse functional groups onto MOP surfaces will significantly broaden the range of properties and potential applications for MOPs. This study describes the use of copper(I)-catalysed, azide-alkyne cycloaddition (CuAAC) click reactions to post-synthetically modify the surface of alkyne-functionalised cuboctahedral MOPs. To this end, a novel Rh(II)-based MOP with 24 available surface alkyne groups was synthesised. Each of the 24 alkyne groups on the surface of the "clickable" Rh-MOP can react with azide-containing molecules at room temperature, without compromising the integrity of the MOP. The wide substrate catalogue and orthogonal nature of CuAAC click chemistry was exploited to densely functionalise MOPs with diverse functional groups, including polymers, carboxylic and phosphonic acids, and even biotin moieties, which retained their recognition capabilities once anchored onto the surface of the MOP.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Post-Synthetic Modification of Aerogels Made of Covalent Cross-linked Metal-Organic Polyhedra

  • Khobotov Bakishev, Akim|||0000-0002-6119-959X
  • Samanta, Partha|||0000-0002-2329-3729
  • Roztocki, Kornel
  • Albalad, Jorge|||0000-0001-5850-6723
  • Royuela, Sergio|||0000-0003-3113-1831
  • Furukawa, Shuhei|||0000-0003-3849-8038
  • Zamora, Félix|||0000-0001-7529-5120
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Aerogels are porous ultralight materials known for their high porosity, wide range of pore sizes, low density, and good macroscopic mechanical properties, all of which make them promising candidates for shaped adsorbents, catalysts, and insulators, among other applications. Here, this work reports a new approach that enables both the formation of modular aerogels, via dynamic covalent chemistry, and their post-synthetic modification, via coordination chemistry. To demonstrate this strategy, this work first polymerizes porous amino-functionalized Rh(II)-based metal-organic polyhedra (MOPs) with aldehydes, which afforded robust imine-gel networks that is then converted into aerogels. Next, this work functionalizes these aerogels through the coordination of ligands on the axial site of Rh(II) paddlewheels of the MOP. Interestingly, in this chemistry, the local changes in the coordination site of the MOPs are transferred to the overall aerogel, thereby altering its macroscopic physicochemical properties. Importantly, this feature enables the synthesis of optimized adsorbents tailored to specific guests, as this work demonstrates through a series of experiments using ligands of different electrostatic and hydrophobic characters.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Porous and Meltable Metal-Organic Polyhedra for the Generation and Shaping of Porous Mixed-Matrix Composites

  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Meng, Lingxin
  • Garcia-Masferrer, Joan
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Sort, Jordi|||0000-0003-1213-3639
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal-organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO uptake relative to the parent film.