Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructuring Lipophilic Dyes in Water Using Stable Vesicles, Quatsomes, as Scaffolds and Their Use as Probes for Bioimaging

  • Ardizzone, Antonio
  • Kurhuzenkau, Siarhei
  • Illa Tuset, Silvia
  • Faraudo, Jordi
  • Bondar, Mykhailo
  • Hagan, David
  • Stryland, Eric Van
  • Painelli, Anna
  • Sissa, Cristina
  • Feiner-Gracia, Natalia
  • Albertazzi, Lorenzo
  • Veciana, Jaume
  • Ventosa, Nora
A new kind of fluorescent organic nanoparticles (FONs) is obtained using quatsomes (QSs), a family of nanovesicles proposed as scaffolds for the nanostructuration of commercial lipophilic carbocyanines (1,1′‐dioctadecyl‐3,3,3′,3′‐tetramethyl‐indocarbocyanine perchlorate (DiI), 1,1′‐dioctadecyl‐3,3,3′,3′‐tetramethyl‐indodicarbocyanine perchlorate (DiD), and 1,1′‐dioctadecyl‐3,3,3′,3′‐tetramethyl‐indotricarbocyanine iodide (DiR)) in aqueous media. The obtained FONs, prepared by a CO2‐based technology, show excellent colloidal‐ and photostability, outperforming other nanoformulations of the dyes, and improve the optical properties of the fluorophores in water. Molecular dynamics simulations provide an atomistic picture of the disposition of the dyes within the membrane. The potential of QSs for biological imaging is demonstrated by performing superresolution microscopy of the DiI‐loaded vesicles in vitro and in cells. Therefore, fluorescent QSs constitute an appealing nanomaterial for bioimaging applications., This work was financially supported by MINECO/FEDER, Spain (Grant Nos. CTQ2013‐40480‐R, SAF2016‐7524‐R, and MAT 2016‐80826‐R), by AGAUR, Generalitat de Catalunya (Grant No. 2014‐SGR‐17), and through the CERCA program, the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER‐BBN) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496, Grant FLOWERS, and SEV‐2014‐0425). L.A. thanks the financial support of AXA Research Fund and D.H. and E.V.S. the Army Research Laboratory (Grant No. W911NF‐15‐2‐0090). The research leading to these results received funding from the People Programme (Marie Curie Actions) of the European Union's Seventh Framework ProgrammeFP7/2007–2013 under REA grant Agreement No. 607721 (Nano2Fun) A.A. and S.I.‐T. are enrolled in the Materials Science Ph.D. program of UAB. A.A. and S.I.‐T. gratefully acknowledge help of Dr. M. Masino in photostability measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioelectronic Recordings of Cardiomyocytes with Accumulation Mode Electrolyte 1 Gated Organic Field Effect Transistors

  • Kyndiah, Adrica
  • Leonardi, Francesca
  • Tarantino, Carolina
  • Cramer, Tobias
  • Millan Solsona, Ruben
  • Garreta, Elena
  • Montserrat, Núria
  • Mas Torrent, Marta
  • Gomila, Gabriel
Organic electronic materials offer an untapped potential for novel tools for low-invasive electrophysiological recording and stimulation devices. Such materials combine semiconducting properties with tailored surface chemistry, elastic mechanical properties and chemical stability in water. In this work, we investigate solution processed Electrolyte Gated Organic Field Effect Transistors (EGOFETs) based on a small molecule semiconductor. We demonstrate that EGOFETs based on a blend of soluble organic semiconductor 2,8-Difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene (diF-TES-ADT) combined with an insulating polymer show excellent sensitivity and long-term recording under electrophysiological applications. Our devices can stably record the extracellular potential of human pluripotent stem cell derived cardiomyocyte cells (hPSCs-CMs) for several weeks. In addition, cytotoxicity tests of pharmaceutical drugs, such as Norepinephrine and Verapamil was achieved with excellent sensitivity. This work demonstrates that organic transistors based on organic blends are excellent bioelectronics transducer for extracellular electrical recording of excitable cells and tissues thus providing a valid alternative to electrochemical transistors., This work has been partially supported by the BEST Postdoctoral Programme funded by the European Commission under Horizon 2020's Marie Curie Sklodowska-Curie Actions COFUND scheme (GA 712754) and the Severo Ochoa programme of the Spanish Ministry of Science and Competitiveness (SEV-2014-0425 (2015–2019) and SEV-2015-0496) and the BORGES project (Marie Curie Skłodowska European Training Network (MSCA-ITN-ETN)) under the GrantAgreement (GA) No: 813863. G. G. acknowledges support from an ICREA Academia award from the Generalitat de Catalunya and from the Agencia Estatal de Investigación (Nanoelectrophys project, TEC2016-79156-P). The authors also thank the DGI (Spain) project FANCY CTQ2016-80030-R, the Generalitat de Catalunya (2017-SGR-918) and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN). Dr. F. Leonardi gratefully acknowledges the “Juan de la Cierva” programme. The authors thank S. Ricci for her help on the samples preparation. This work has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (StG-2014-640525_REGMAMKID to C.T. and N.M.). NM has received funding from the Spanish Ministry of Economy and Competitiveness/FEDER (SAF2015-72617-EXP and SAF2017-89782-), the Generalitat de Catalunya and CERCA programme (2017 SGR 1306), Asociación Española contra el Cáncer (LABAE16006 to N.M.) and by CardioCel (TerCel, Instituto de Salud Carlos III). IBEC is the recipient of a Severo Ochoa Award of Excellence from MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fine tuning the extracellular environment accelerates the derivation of kidney organoids from human pluripotent stem cells

  • Garreta, Elena
  • Prado, Patricia
  • Tarantino, Carolina
  • Oria, Roger
  • Fanlo, Lucía
  • Martí, Elisa
  • Zalvidea, Dobryna
  • Trepat, Xavier
  • Roca-Cusachs, Pere
  • Gavaldà-Navarro, Aleix
  • Cozzuto, Luca
  • Campistol, Josep M.
  • Izpisúa Belmonte, Juan Carlos
  • Hurtado del Pozo, Carmen
  • Montserrat, Núria
The generation of organoids is one of the biggest scientific advances in regenerative medicine. Here, by lengthening the time that human pluripotent stem cells (hPSCs) were exposed to a three-dimensional microenvironment, and by applying defined renal inductive signals, we generated kidney organoids that transcriptomically matched second-trimester human fetal kidneys. We validated these results using ex vivo and in vitro assays that model renal development. Furthermore, we developed a transplantation method that utilizes the chick chorioallantoic membrane. This approach created a soft in vivo microenvironment that promoted the growth and differentiation of implanted kidney organoids, as well as providing a vascular component. The stiffness of the in ovo chorioallantoic membrane microenvironment was recapitulated in vitro by fabricating compliant hydrogels. These biomaterials promoted the efficient generation of renal vesicles and nephron structures, demonstrating that a soft environment accelerates the differentiation of hPSC-derived kidney organoids., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (StG-2014-640525_REGMAMKID to E.G., P.P., C.T. and N.M. and CoG-616480 to X.T.), the European Commission (project H2020-FETPROACT-01-2016-731957 to X.T. and P.R.-C.), the Spanish Ministry of Economy and Competitiveness/FEDER (BFU2016-77498-P to L.F. and E.M., BFU2015-65074 to X.T., BFU2016-79916-P to P.R.-C., SAF2015-72617-EXP to N.M., SAF2017-89782-R to N.M. and RYC-2014-16242 to N.M.), the Generalitat de Catalunya and CERCA programme (2014-SGR-927 to X.T. and 2017 SGR 1306 to N.M.), Asociación Española contra el Cáncer (AECC CI2016 to L.F. and E.M., LABAE16006 to N.M.). R.O. is supported by an FI fellowship (Generalitat de Catalunya). P.R.-C. is also supported by Obra Social La Caixa. J.C.I.B. is supported by the G. Harold and Leila Y. Mathers Charitable Foundation, the Leona M. and Harry B. Helmsley Charitable Trust (2012-PG-MED002), the Moxie Foundation, the National Institutes of Health (5R21AG055938), the Universidad Católica San Antonio de Murcia and Fundación Dr. Pedro Guillén. C.H.P. is supported by the Bioengineering Excellence of Scientific Training project, cofunded from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 712754 and from the Spanish Ministry of Economy and Competitiveness under the Severo Ochoa grant SEV-2014-0425 (2015–2019). N.M. is also supported by CardioCel (TerCel, Instituto de Salud Carlos III). IBEC is the recipient of a Severo Ochoa Award of Excellence from MINECO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micelle carriers based on dendritic macromolecules containing bis-MPA and glycine for antimalarial drug delivery

  • Martí Coma-Cros, Elisabet
  • Lancelot, Alexandre
  • San Anselmo, María
  • Borgheti-Cardoso, Livia Neves
  • Valle-Delgado, Juan José
  • Serrano, José Luis
  • Fernàndez-Busquets, Xavier
  • Sierra, Teresa
Biomaterials for antimalarial drug transport still need to be investigated in order to attain nanocarriers that can tackle essential issues related to malaria treatment, e.g. complying with size requirements and targeting specificity for their entry into Plasmodium-infected red blood cells (pRBCs), and limiting premature drug elimination or drug resistance evolution. Two types of dendritic macromolecule that can form vehicles suitable for antimalarial drug transport are herein explored. A new hybrid dendritic-linear-dendritic block copolymer based on Pluronic® F127 and amino terminated 2,2′-bis(glycyloxymethyl)propionic acid dendrons with a poly(ester amide) skeleton (HDLDBC-bGMPA) and an amino terminated dendronized hyperbranched polymer with a polyester skeleton derived from 2,2′-bis(hydroxymethyl)propionic acid (DHP-bMPA) have provided self-assembled and unimolecular micelles. Both types of micelle carrier are biocompatible and exhibit appropriate sizes to enter into pRBCs. Targeting studies have revealed different behaviors for each nanocarrier that may open new perspectives for antimalarial therapeutic approaches. Whereas DHP-bMPA exhibits a clear targeting specificity for pRBCs, HDLDBC-bGMPA is incorporated by all erythrocytes. It has also been observed that DHP-bMPA and HDLDBC-bGMPA incorporate into human umbilical vein endothelial cells with different subcellular localization, i.e. cytosolic and nuclear, respectively. Drug loading capacity and encapsulation efficiencies for the antimalarial compounds chloroquine, primaquine and quinacrine ranging from 30% to 60% have been determined for both carriers. The resulting drug-loaded nanocarriers have been tested for their capacity to inhibit Plasmodium growth in in vitro and in vivo assays., This research was supported by grants BIO2014-52872-R, CTQ2015-70174-P, MAT2015-66208-C3-1-P (Ministerio de Ciencia, Innovación y Universidades, Spain, including FEDER funds), 2014-SGR-938 (Generalitat de Catalunya, Spain), and (Gobierno de Aragón-FSE). ISGlobal and IBEC are members of the CERCA Programme, Generalitat de Catalunya. A. L. thanks the Ministerio de Ciencia, Innovación y Universidades for his grant (FPU12/05210). L. N. B.-C. is supported by the European Commission under Horizon 2020's Marie Skłodowska-Curie Actions COFUND scheme (Grant Agreement no. 712754) and by the MINECO's Severo Ochoa programme (Grant SEV-2014-0425 (2015–2019))., The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promising nanomaterials in the fight against malaria

  • Borgheti-Cardoso, Livia Neves
  • San Anselmo, María
  • Lantero Escolar, Elena
  • Lancelot, Alexandre
  • Serrano, José Luis
  • Hernández-Ainsa, Silvia
  • Fernàndez-Busquets, Xavier
  • Sierra, Teresa
For more than one hundred years, several treatments against malaria have been proposed but they have systematically failed, mainly due to the occurrence of drug resistance in part resulting from the exposure of the parasite to low drug doses. Several factors are behind this problem, including (i) the formidable barrier imposed by the Plasmodium life cycle with intracellular localization of parasites in hepatocytes and red blood cells, (ii) the adverse fluidic conditions encountered in the blood circulation that affect the interaction of molecular components with target cells, and (iii) the unfavorable physicochemical characteristics of most antimalarial drugs, which have an amphiphilic character and can be widely distributed into body tissues after administration and rapidly metabolized in the liver. To surpass these drawbacks, rather than focusing all efforts on discovering new drugs whose efficacy is quickly decreased by the parasite's evolution of resistance, the development of effective drug delivery carriers is a promising strategy. Nanomaterials have been investigated for their capacity to effectively deliver antimalarial drugs at local doses sufficiently high to kill the parasites and avoid drug resistance evolution, while maintaining a low overall dose to prevent undesirable toxic side effects. In recent years, several nanostructured systems such as liposomes, polymeric nanoparticles or dendrimers have been shown to be capable of improving the efficacy of antimalarial therapies. In this respect, nanomaterials are a promising drug delivery vehicle and can be used in therapeutic strategies designed to fight the parasite both in humans and in the mosquito vector of the disease. The chemical analyses of these nanomaterials are essential for the proposal and development of effective anti-malaria therapies. This review is intended to analyze the application of nanomaterials to improve the drug efficacy on different stages of the malaria parasites in both the human and mosquito hosts., This research was supported by grants RTI2018-094579-B-I00, PCIN-2017-100, PGC2018-097583-B-I00, PGC2018-093761-B-C31, CTQ2017-90596-REDT (Ministerio de Ciencia, Innovación y Universidades, Spain, which included FEDER funds), 2017-178 (ERA-NET Cofund EURONANOMED), 2017-SGR-908 (Generalitat de Catalunya, Spain), and E47_20R (Gobierno de Aragón-FSE). ISGlobal and IBEC are members of the CERCA Programme, Generalitat de Catalunya, and both acknowledge support from the Spanish Ministry of Science, Innovation and Universities through the “Centro de Excelencia Severo Ochoa 2019–2023” Program (CEX2018-000806-S). This research is part of ISGlobal's Program on the Molecular Mechanisms of Malaria, which is partially supported by the Fundación Ramón Areces. LNB-C was supported by the European Commission under Horizon 2020's Marie Skłodowska-Curie Actions COFUND scheme (712754) and by the Severo Ochoa programme of the Spanish Ministry of Science and Competitiveness, SEV-2014-0425 (2015–2019). MSA thanks the Ministerio de Ciencia, Innovación y Universidades, for her grant (BES-2016-078774)., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale Mapping of the Conductivity and Interfacial Capacitance of an Electrolyte‐Gated Organic Field‐Effect Transistor under Operation

  • Kyndiah, Adrica
  • Checa, Martí
  • Leonardi, Francesca
  • Millan Solsona, Ruben
  • Muzio, Martina Di
  • Tanwar, Shubham
  • Fumagalli, Laura
  • Mas Torrent, Marta
  • Gomila, Gabriel
Probing nanoscale electrical properties of organic semiconducting materials at the interface with an electrolyte solution under externally applied voltages is key in the field of organic bioelectronics. It is demonstrated that the conductivity and interfacial capacitance of the active channel of an electrolyte‐gated organic field‐effect transistor (EGOFET) under operation can be probed at the nanoscale using scanning dielectric microscopy in force detection mode in liquid environment. Local electrostatic force versus gate voltage transfer characteristics are obtained on the device and correlated with the global current–voltage transfer characteristics of the EGOFET. Nanoscale maps of the conductivity of the semiconducting channel show the dependence of the channel conductivity on the gate voltage and its variation along the channel due to the space charge limited conduction. The maps reveal very small electrical heterogeneities, which correspond to local interfacial capacitance variations due to an ultrathin non‐uniform insulating layer resulting from a phase separation in the organic semiconducting blend. Present results offer insights into the transduction mechanism at the organic semiconductor/electrolyte interfaces at scales down to ≈100 nm, which can bring substantial optimization of organic electronic devices for bioelectronic applications such as electrical recording on excitable cells or label‐free biosensing., This work was partially supported by the BEST Postdoctoral Programme funded by the European Commission under Horizon 2020's Marie Curie Sklodowska‐Curie Actions COFUND scheme (GA 712754) and the Severo Ochoa programme of the Spanish Ministry of Science and Competitiveness (SEV‐2014‐0425), the BORGES project (Marie Curie Skłodowska European Training Network (MSCA‐ITN‐ETN)) under the Grant Agreement (GA 813863), and the Agencia Estatal de Investigacion (Nanoelectrophys project, TEC2016‐79156‐P). Support from an ICREA Academia award (G.G.), the 2017‐SGR1079 grant, and the CERCA program from the Generalitat de Catalunya is also acknowledged. F.L. and M.M.‐T. were funded by the Spanish Ministry (project FANCY CTQ2016‐80030‐R and GENESIS PID2019‐111682RB‐I00), the Generalitat de Catalunya (2017‐SGR‐918), and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496). F.L. acknowledges the Juan de la Cierva fellowship. L.F. received funding from the European Research Council (grant agreement No. 819417) under the European Union's Horizon 2020 research and innovation programme. This work also received funding from the European Commission under Grant Agreement No. H2020‐MSCA‐721874 (SPM2.0). The authors would like to thank Prof. T. Cramer for the measurement software of the EGOFETs and for scientific discussion. The acknowledgements were updated to include a grant from the European Commission on January 27, 2021, after initial online publication., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme-powered porous micromotors built from a hierarchical micro- and mesoporous UiO-type metal–organic framework

  • Yang, Yunhui
  • Arqué, Xavier
  • Patiño, Tania
  • Pérez-Carvajal, Javier
  • Imaz, Inhar
  • Maspoch, Daniel
  • Sánchez, Samuel
Here, we report the design, synthesis, and functional testing of enzyme-powered porous micromotors built from a metal–organic framework (MOF). We began by subjecting a presynthesized microporous UiO-type MOF to ozonolysis, to confer it with mesopores sufficiently large to adsorb and host the enzyme catalase (size: 6–10 nm). We then encapsulated catalase inside the mesopores, observing that they are hosted in those mesopores located at the subsurface of the MOF crystals. In the presence of H2O2 fuel, MOF motors (or MOFtors) exhibit jet-like propulsion enabled by enzymatic generation of oxygen bubbles. Moreover, thanks to their hierarchical pore system, the MOFtors retain sufficient free space for adsorption of additional targeted species, which we validated by testing a MOFtor for removal of rhodamine B during self-propulsion., This work was supported by BIST-IGNITE (MOFtors), the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (project 2017 SGR 238), and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 866348: iNanoSwarms). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706). Y.Y. acknowledges the China Scholarship Council for scholarship support. X.A. thanks the Spanish MINECO for the Severo Ochoa program (SEV-2014-0425) for the Ph.D. fellowship (PRE2018-083712). S.S. thanks the Pengcheng Scholar Professorship at Harbin Institute of Technology Shenzhen, China. T.P. thanks the European Union’s Horizon 2020 research and innovation program, under the Marie Skłodowska-Curie Individual Fellowship (H2020-MSCA-IF2018, DNA-bots)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanotechnology approaches in chronic wound healing

  • Blanco-Fernández, Bárbara
  • Castaño, Oscar
  • Mateos-Timoneda, Miguel A.
  • Engel, Elisabeth
  • Pérez-Amodio, Soledad
[Significance]: The incidence of chronic wounds is increasing due to our aging population and the augment of people afflicted with diabetes. With the extended knowledge on the biological mechanisms underlying these diseases, there is a novel influx of medical technologies into the conventional wound care market., [Recent Advances]: Several nanotechnologies have been developed demonstrating unique characteristics that address specific problems related to wound repair mechanisms. In this review, we focus on the most recently developed nanotechnology-based therapeutic agents and evaluate the efficacy of each treatment in in vivo diabetic models of chronic wound healing., [Critical Issues]: Despite the development of potential biomaterials and nanotechnology-based applications for wound healing, this scientific knowledge is not translated into an increase of commercially available wound healing products containing nanomaterials., [Future Directions]: Further studies are critical to provide insights into how scientific evidences from nanotechnology-based therapies can be applied in the clinical setting., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) through the project MAT2012–38793 and MAT2015-68906-R and the Dermoglass project funded by CaixaImpulse Programme of Obra Social La Caixa (CaixaImpulse CI0015). Barbara Blanco-Fernandez acknowledges the Marie Skłodowska-Curie grant (agreement no. 712754) and the Severo Ochoa grant (SEV-2014-0425). O. Castano acknowledges the support from the Serra Hunter programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Cell-Derived Matrices for Three-DimensionalIn VitroCancer Cell Models

  • Rubí-Sans, Gerard
  • Nyga, Agata
  • Rebollo, Elena
  • Pérez-Amodio, Soledad
  • Otero, Jorge
  • Navajas, Daniel
  • Mateos-Timoneda, Miguel A.
  • Engel, Elisabeth
Most morphogenetic and pathological processes are driven by cells responding to the surrounding matrix, such as its composition, architecture, and mechanical properties. Despite increasing evidence for the role of extracellular matrix (ECM) in tissue and disease development, many in vitro substitutes still fail to effectively mimic the native microenvironment. We established a novel method to produce macroscale (>1 cm) mesenchymal cell-derived matrices (CDMs) aimed to mimic the fibrotic tumor microenvironment surrounding epithelial cancer cells. CDMs are produced by human adipose mesenchymal stem cells cultured in sacrificial 3D scaffold templates of fibronectin-coated poly-lactic acid microcarriers (MCs) in the presence of macromolecular crowders. We showed that decellularized CDMs closely mimic the fibrillar protein composition, architecture, and mechanical properties of human fibrotic ECM from cancer masses. CDMs had highly reproducible composition made of collagen types I and III and fibronectin ECM with tunable mechanical properties. Moreover, decellularized and MC-free CDMs were successfully repopulated with cancer cells throughout their 3D structure, and following chemotherapeutic treatment, cancer cells showed greater doxorubicin resistance compared to 3D culture in collagen hydrogels. Collectively, these results support the use of CDMs as a reproducible and tunable tool for developing 3D in vitro cancer models., The researchers thank MICIU (BES-2016-077182, MAT2015-68906-R, RTI2018-096320-B-C21, PGC2018-097323-A-I00, DPI2017-83721-P) and the Spanish network of cell therapy (TERCEL) for financial support. Finally, the researchers also thank Programme/Generalitat de Catalunya (2017-SGR-359) and the Severo Ochoa program of the Spanish Ministry of Science and Competitiveness (grant SEV-2014-0425, 2015-2019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conductive Bacterial Nanocellulose-Polypyrrole Patches Promote Cardiomyocyte Differentiation

  • Srinivasan, Sumithra Y.
  • Cler, Marina
  • Zapata Arteaga, Osnat
  • Dörling, Bernhard
  • Campoy Quiles, Mariano
  • Martínez Fernández, Elena
  • Engel, Elisabeth
  • Pérez Amodio, Soledad
  • Laromaine, Anna
The low endogenous regenerative capacity of the heart, added to the prevalence of cardiovascular diseases, triggered the advent of cardiac tissue engineering in the last decades. The myocardial niche plays a critical role in directing the function and fate of cardiomyocytes; therefore, engineering a biomimetic scaffold holds excellent promise. We produced an electroconductive cardiac patch of bacterial nanocellulose (BC) with polypyrrole nanoparticles (Ppy NPs) to mimic the natural myocardial microenvironment. BC offers a 3D interconnected fiber structure with high flexibility, which is ideal for hosting Ppy nanoparticles. BC-Ppy composites were produced by decorating the network of BC fibers (65 ± 12 nm) with conductive Ppy nanoparticles (83 ± 8 nm). Ppy NPs effectively augment the conductivity, surface roughness, and thickness of BC composites despite reducing scaffolds' transparency. BC-Ppy composites were flexible (up to 10 mM Ppy), maintained their intricate 3D extracellular matrix-like mesh structure in all Ppy concentrations tested, and displayed electrical conductivities in the range of native cardiac tissue. Furthermore, these materials exhibit tensile strength, surface roughness, and wettability values appropriate for their final use as cardiac patches. In vitro experiments with cardiac fibroblasts and H9c2 cells confirmed the exceptional biocompatibility of BC-Ppy composites. BC-Ppy scaffolds improved cell viability and attachment, promoting a desirable cardiomyoblast morphology. Biochemical analyses revealed that H9c2 cells showed different cardiomyocyte phenotypes and distinct levels of maturity depending on the amount of Ppy in the substrate used. Specifically, the employment of BC-Ppy composites drives partial H9c2 differentiation toward a cardiomyocyte-like phenotype. The scaffolds increase the expression of functional cardiac markers in H9c2 cells, indicative of a higher differentiation efficiency, which is not observed with plain BC. Our results highlight the remarkable potential use of BC-Ppy scaffolds as a cardiac patch in tissue regenerative therapies., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the National Research Agency (AEI) and European Regional Development Funds (ERDF/FEDER), project BIOCARDIO ref RTI2018-096320–B-C21, project BIOSOFT-REGE ref PID2021-122645OB-I00, the CERCA Program/Generalitat de Catalunya, the ‘Severo Ochoa’ Programme for Center of Excellence in R&D (CEX2019-000917), the Programme/Generalitat de Catalunya (2017-SGR-359), the Severo Ochoa Programme of the Spanish Ministry of Science and Innovation (MICINN─Grant SEV-2014–0425, 2015–2019 and CEX2018–000,789-S, 2019–2023), and the projects FIP-PALOMA, FIP-BEAT, and the PDC2022-133755-I00/AEI/10.13039/501100011033 European Union NextGeneration EU/PRTR. This research was also supported by the European Union’s Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397). This project also received the support of a La Caixa INPhINIT Fellowship (ID 100010434) with project code LCF/BQ/DR19/11740025. S.Y.S. is enrolled in the Materials Science Ph.D. program of the UAB. S.Y.S. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), in the Aerogels COST ACTION (CA 18125), and in CSIC-Conexión Nanomedicine, EPNOE network, and Red Nanocare 2.0. The authors acknowledge the use of Biorender.com., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inkjet printed flexible non-enzymatic glucose sensor for tear fluid analysis

  • Romeo, Agostino
  • Moya, Ana
  • Leung, Tammy S.
  • Gabriel, Gemma
  • Villa, Rosa
  • Sánchez, Samuel
Here, we present a flexible and low-cost inkjet printed electrochemical sensor for enzyme-free glucose analysis. Versatility, short fabrication time and low cost make inkjet printing a valuable alternative to traditional sensor manufacturing techniques. We fabricated electro-chemical glucose sensors by inkjet printing electrodes on a flexible polyethylene terephthalate substrate. CuO microparticles were used to modify our electrodes, leading to a sensitive, stable and cost-effective platform for non-enzymatic detection of glucose. Selectivity, reproducibility, and life-time provided by the CuO functionalization demonstrated that these sensors are reliable tools for personalized diagnostics and self-assessment of an individual's health. The detection of glucose at concentrations matching that of tear fluid allows us to envisage applications in ocular diagnostics, where painless and non-invasive monitoring of diabetes can be achieved by analyzing glucose contained in tears., This work was supported by the European Research Council (ERC) Starting Grant “Lab-in-a-tube and Nano-robotics biosen-sors; LT-NRBS” [no. 311529] and Spanish Ministry of Economy and Competitiveness through project grant DPI2015-65401-C3-3-R MINECO/FEDER, EU. A.R. acknowledges financial support pro- vided by the European Commission under Horizon 2020’s Marie Skłodowska-Curie Actions COFUND scheme [Grant Agreement no. 712754] and by the Severo Ochoa programme of the Spanish Ministry of Economy and Competitiveness [Grant SEV-2014-0425 (2015–2019)]. G.G. and A.M. acknowledge ICTS “NANBIOSIS”, more specifically the SU8 Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) at the IMB-CNM (CSIC). This work has also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM. The authors would like to thank Mrs. Felicitas Pradel for SEM-EDX investigations., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Micelle carriers based on dendritic macromolecules containing bis-MPA and glycine for antimalarial drug delivery

  • Martí Coma-Cros, E.
  • Lancelot, A.
  • San Anselmo, M.
  • Neves Borgheti-Cardoso, L.
  • Valle-Delgado, J.J.
  • Serrano, J.L.
  • Fernàndez-Busquets, X.
  • Sierra, T.
Biomaterials for antimalarial drug transport still need to be investigated in order to attain nanocarriers that can tackle essential issues related to malaria treatment, e.g. complying with size requirements and targeting specificity for their entry into Plasmodium-infected red blood cells (pRBCs), and limiting premature drug elimination or drug resistance evolution. Two types of dendritic macromolecule that can form vehicles suitable for antimalarial drug transport are herein explored. A new hybrid dendritic-linear-dendritic block copolymer based on Pluronic® F127 and amino terminated 2, 2'-bis(glycyloxymethyl)propionic acid dendrons with a poly(ester amide) skeleton (HDLDBC-bGMPA) and an amino terminated dendronized hyperbranched polymer with a polyester skeleton derived from 2, 2'-bis(hydroxymethyl)propionic acid (DHP-bMPA) have provided self-assembled and unimolecular micelles. Both types of micelle carrier are biocompatible and exhibit appropriate sizes to enter into pRBCs. Targeting studies have revealed different behaviors for each nanocarrier that may open new perspectives for antimalarial therapeutic approaches. Whereas DHP-bMPA exhibits a clear targeting specificity for pRBCs, HDLDBC-bGMPA is incorporated by all erythrocytes. It has also been observed that DHP-bMPA and HDLDBC-bGMPA incorporate into human umbilical vein endothelial cells with different subcellular localization, i.e. cytosolic and nuclear, respectively. Drug loading capacity and encapsulation efficiencies for the antimalarial compounds chloroquine, primaquine and quinacrine ranging from 30% to 60% have been determined for both carriers. The resulting drug-loaded nanocarriers have been tested for their capacity to inhibit Plasmodium growth in in vitro and in vivo assays.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Engineering transient dynamics of artificial cells by stochastic distribution of enzymes

  • Song, Shidong
  • Mason, Alexander F.
  • Post, Richard A.J.
  • De Corato, Marco
  • Mestre, Rafael
  • Yewdall, N. Amy
  • Cao, Shoupeng
  • Van der Hofstad, Remco W.
  • Sánchez, Samuel
  • Abdelmohsen, Loai K. E. A.
  • van Hest, Jan C.M.
Here the authors develop a coacervate micromotor that can display autonomous motion as a result of stochastic distribution of propelling units. This stochastic-induced mobility is validated and explained through experiments and theory. Random fluctuations are inherent to all complex molecular systems. Although nature has evolved mechanisms to control stochastic events to achieve the desired biological output, reproducing this in synthetic systems represents a significant challenge. Here we present an artificial platform that enables us to exploit stochasticity to direct motile behavior. We found that enzymes, when confined to the fluidic polymer membrane of a core-shell coacervate, were distributed stochastically in time and space. This resulted in a transient, asymmetric configuration of propulsive units, which imparted motility to such coacervates in presence of substrate. This mechanism was confirmed by stochastic modelling and simulations in silico. Furthermore, we showed that a deeper understanding of the mechanism of stochasticity could be utilized to modulate the motion output. Conceptually, this work represents a leap in design philosophy in the construction of synthetic systems with life-like behaviors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Self-Propulsion of Active Colloids via Ion Release: Theory and Experiments

  • De Corato, Marco
  • Arqué, Xavier
  • Patiño, Tania
  • Arroyo, Marino
  • Sánchez, Samuel
  • Pagonabarraga, Ignacio
We study the self-propulsion of a charged colloidal particle that releases ionic species using theory and experiments. We relax the assumptions of thin Debye length and weak nonequilibrium effects assumed in classical phoretic models. This leads to a number of unexpected features that cannot be rationalized considering the classic phoretic framework: an active particle can reverse the direction of motion by increasing the rate of ion release and can propel even with zero surface charge. Our theory predicts that there are optimal conditions for self-propulsion and a novel regime in which the velocity is insensitive to the background electrolyte concentration. The theoretical results quantitatively capture the salt-dependent velocity measured in our experiments using active colloids that propel by decomposing urea via a surface enzymatic reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The rising velocity of a slowly pulsating bubble in a shear-thinning fluid

  • De Corato, Marco
  • Dimakopoulos, Yannis
  • Tsamopoulos, John
We study the rising motion of small bubbles that undergo contraction, expansion, or oscillation in a shear-thinning fluid. We model the non-Newtonian response of the fluid using the Carreau-Yasuda constitutive equation, under the assumptions that the inertia of the fluid and the bubble is negligible and that the bubble remains spherical. These assumptions imply that the rising velocity of the bubble is instantaneously proportional to the buoyancy force, with the proportionality constant given by the inverse of the friction coefficient. Instead of computing the rising velocity for a particular radial dynamics of the bubble, we evaluate its friction coefficient as a function of the rheological parameters and of the instantaneous expansion/contraction rate. To compute the friction coefficient, we impose a translational motion and we linearize the governing equations around the expansion/contraction dynamics of the bubble, which we solve using a perturbation expansion along with the finite element method. Our results show that the radial motion of the bubble reduces the viscosity of the surrounding fluid and may thus markedly decrease the friction coefficient of the bubble. We use the friction coefficient to compute the average rise velocity of a bubble with periodic variations of its radius, which we find to be strongly increased by the radial pulsations. Finally, we compare our predictions with the experiments performed by Iwata et al. [“Pressure-oscillation defoaming for viscoelastic fluid,” J. Non-Newtonian Fluid Mech. 151(1-3), 30–37 (2008)], who found that the rise velocity of bubbles that undergo radial pulsations is increased by orders of magnitude compared to the case of bubbles that do not pulsate. Our results shed light on the mechanism responsible for enhanced bubble release in shear-thinning fluids, which has implications for bubble removal from complex fluids.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enzyme-Powered Porous Micromotors Built from a Hierarchical Micro- And Mesoporous UiO-Type Metal-Organic Framework

  • Yang, Yunhui|||0000-0002-6007-2335
  • Arqué, Xavier
  • Patiño, Tania|||0000-0001-9979-7926
  • Guillerm, Vincent|||0000-0003-3460-223X
  • Blersch, Pascal Raphael
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Sánchez Ordóñez, Samuel|||0000-0001-9713-9997
Here, we report the design, synthesis, and functional testing of enzyme-powered porous micromotors built from a metal-organic framework (MOF). We began by subjecting a presynthesized microporous UiO-type MOF to ozonolysis, to confer it with mesopores sufficiently large to adsorb and host the enzyme catalase (size: 6-10 nm). We then encapsulated catalase inside the mesopores, observing that they are hosted in those mesopores located at the subsurface of the MOF crystals. In the presence of H2O2 fuel, MOF motors (or MOFtors) exhibit jet-like propulsion enabled by enzymatic generation of oxygen bubbles. Moreover, thanks to their hierarchical pore system, the MOFtors retain sufficient free space for adsorption of additional targeted species, which we validated by testing a MOFtor for removal of rhodamine B during self-propulsion.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Breath analysis using electronic nose and gas chromatography-mass spectrometry, A pilot study on bronchial infections in bronchiectasis

  • Fontes de Oliveira, Luciana
  • Mallafré-Muro, Celia
  • Giner, Jordi|||0000-0002-3044-2059
  • Perea, Lidia|||0000-0002-1624-0012
  • Sibila, Oriol|||0000-0002-4833-6713
  • Pardo, Antonio|||0000-0003-4369-544X
  • Marco, Santiago
Background and aims: In this work, breath samples from clinically stable bronchiectasis patients with and without bronchial infections by Pseudomonas Aeruginosa- PA) were collected and chemically analysed to determine if they have clinical value in the monitoring of these patients. Materials and methods: A cohort was recruited inviting bronchiectasis patients (25) and controls (9). Among the former group, 12 members were suffering PA infection. Breath samples were collected in Tedlar bags and analyzed by e-nose and Gas Chromatography-Mass Spectrometry (GC-MS). The obtained data were analyzed by chemometric methods to determine their discriminant power in regards to their health condition. Results were evaluated with blind samples. Results: Breath analysis by electronic nose successfully separated the three groups with an overall classification rate of 84% for the three-class classification problem. The best discrimination was obtained between control and bronchiectasis with PA infection samples 100% (CI: 84-100%) on external validation and the results were confirmed by permutation tests. The discrimination analysis by GC-MS provided good results but did not reach proper statistical significance after a permutation test. Conclusions: Breath sample analysis by electronic nose followed by proper predictive models successfully differentiated between control, Bronchiectasis and Bronchiectasis PA samples.