Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 80
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

N-Doped Octagon-Containing HBC as Redox and pH Chiroptical Switch in the NIR

  • Medel, Miguel A.|||0000-0003-2594-1723
  • Hortigüela, Lidia
  • Lloveras, Vega
  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Miguel, Delia
  • Mota, Antonio J.
  • Crivillers, Núria|||0000-0001-6538-2482
  • González Campaña, Araceli|||0000-0001-5483-5642
  • Morcillo, Sara P.
The optical and chiroptical properties of an aza-HBC-oct-[5]helicene have been studied and also modulated by means of protonation or oxidation. In both cases, the generated species shows a new absorption band in the NIR region that is not present in the neutral species. This result enables this N-doped nanographene to act both as optical and, remarkably, as chiroptical switch since both the CD and CPL can be modulated by external stimuli such as redox or pH changes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Methylxanthines for halogen bonded cocrystals with 1,4-diiodotetrafluorobenzene, green synthesis, structure, photophysics and DFT studies

  • Benito, Mónica|||0000-0001-5550-4757
  • Núñez, Rosario|||0000-0003-4582-5148
  • Sinha, Sohini|||0000-0003-0875-5080
  • Roscini, Claudio|||0000-0002-0157-8934
  • Hidalgo-Rosa, Yoan
  • Schott, Eduardo
  • Zarate, Ximena
  • Molins Grau, Elies|||0000-0003-1012-0551
Four new halogen-bonded cocrystals of biological methylxanthines, named caffeine, theophylline and theobromine, have been prepared with 1,4-diiodotetrafluorobenzene as a halogen bond donor by mechanochemical and solution processes. For theophylline, N⋯I and N⋯O interactions were observed, while for caffeine and theobromine, only N⋯I was detected. The solids were characterized by PXRD, SC-XRD, FTIR and thermal methods (TGA-DSC analyses). In addition, the solid-state photoluminescence properties of the methylxanthines and their respective cocrystals have been studied and quantum chemistry calculations have been performed to rationalise and understand the electronic and optical properties of all compounds. This work provides a triad of natural methylxanthines capable of forming halogen-bonded multicomponent systems that can give rise to a cocrystal-to-crystal transformation with off-on luminescence activation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fluorescent molecular systems based on carborane-perylenediimide conjugates

  • Rodriguez-Madrid, Ruben|||0000-0002-9774-6655
  • Sinha, Sohini|||0000-0003-0875-5080
  • Parejo Bruque, Laura
  • Hernando, Jordi|||0000-0002-1126-4138
  • Núñez, Rosario|||0000-0003-4582-5148
This study presents the successful synthesis of two perylenediimide (PDI)-based ortho-carborane (o-carborane) derivatives, PDI-CB1 and PDI-CB2, through the insertion of decaborane into alkyne-terminated PDIs (PDI1 and PDI2). The introduction of o-carborane groups did not alter the optical properties of the PDI units in solution compared to their carborane-free counterparts, maintaining excellent fluorescence quantum yields of around 100% in various solvents. This was achieved by using a methylene linker to minimize electronic interaction between PDI and o-carborane, and by incorporating bulky o-carborane groups at imide- position to enhance solubility and prevent π-π stacking-induced aggregation. Aggregation studies demonstrated that PDI-CB1 and PDI-CB2 have greater solubility than PDI1 and PDI2 in both nonpolar and aqueous solvents. Despite the steric hindrance imparted by the o-carborane units, the solid state emission of PDI-CB1 and PDI-CB2 was affected by aggregation-caused fluorescence quenching. However, solid PDI-CB1 preserved bright red excimer-type emission, which persisted in water-dispersible nanoparticles, indicating potential for application as a theranostic agent combining fluorescence bioimaging with anticancer boron neutron capture therapy (BNCT) due to its high boron content.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Arrhythmic Effects Evaluated on Caenorhabditis elegans, The Case of Polypyrrole Nanoparticles

  • Srinivasan, Sumithra Yasaswini|||0000-0002-0473-9801
  • Illera, Pilar Alvarez
  • Kukhtar, Dmytro
  • Benseny Cases, Núria|||0000-0003-4603-6829
  • Cerón, Julián|||0000-0003-4739-2243
  • Álvarez, Javier
  • Fonteriz, Rosalba I.
  • Montero, Mayte
  • Laromaine, Anna|||0000-0002-4764-0780
Experimental studies and clinical trials of nanoparticles for treating diseases are increasing continuously. However, the reach to the market does not correlate with these efforts due to the enormous cost, several years of development, and off-target effects like cardiotoxicity. Multicellular organisms such as the Caenorhabditis elegans (C. elegans) can bridge the gap between in vitro and vertebrate testing as they can provide extensive information on systemic toxicity and specific harmful effects through facile experimentation following 3R EU directives on animal use. Since the nematodes' pharynx shares similarities with the human heart, we assessed the general and pharyngeal effects of drugs and polypyrrole nanoparticles (Ppy NPs) using C. elegans. The evaluation of FDA-approved drugs, such as Propranolol and Racepinephrine reproduced the arrhythmic behavior reported in humans and supported the use of this small animal model. Consequently, Ppy NPs were evaluated due to their research interest in cardiac arrhythmia treatments. The NPs' biocompatibility was confirmed by assessing survival, growth and development, reproduction, and transgenerational toxicity in C. elegans. Interestingly, the NPs increased the pharyngeal pumping rate of C. elegans in two slow-pumping mutant strains, JD21 and DA464. Moreover, the NPs increased the pumping rate over time, which sustained up to a day post-excretion. By measuring pharyngeal calcium levels, we found that the impact of Ppy NPs on the pumping rate could be mediated through calcium signaling. Thus, evaluating arrhythmic effects in C. elegans offers a simple system to test drugs and nanoparticles, as elucidated through Ppy NPs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mercury speciation in selenium enriched wheat plants hydroponically exposed to mercury pollution

  • Manivannan, Nithyapriya
  • Subirana, Maria Angels
  • Boada, Roberto|||0000-0003-4857-8402
  • Marini, Carlo
  • Llugany, Mercè|||0000-0002-9940-0383
  • Valiente, Manuel|||0000-0003-0766-9922
  • Simonelli, Laura|||0000-0001-5331-0633
Mercury (Hg) pollution in agricultural soils and its potential pathway to the human food chain can pose a serious health concern. Understanding the pathway of Hg in plants and how the speciation may change upon interaction with other elements used for biofortification can be critical to assess the real implications for the final plant-based product. In that respect, selenium (Se) biofortification of crops grown in Se-poor soil regions is becoming a common practice to overcome Se deficient diets. Therefore, it is important to assess the interplay between these two elements since Se may form complexes with Hg reducing its bioavailability and toxicity. In this work, the speciation of Hg in wheat plants grown hydroponically under the presence of Hg (HgCl) and biofortified with Se (selenite, selenate, or a 1:1 mixture of both) has been investigated by X-ray absorption spectroscopy at the Hg L-edge. The main Hg species found in wheat grains was the highly toxic methylmercury. It was found that the Se-biofortification of wheat did not prevent, in general, the Hg translocation to grains. Only the 1:1 mixture treatment seemed to have an effect in reducing the levels of Hg and the presence of methylmercury in grains.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Therapeutic drug monitoring of amikacin and colistin in patients with multidrug-resistant gram-negative infections using a portable plasmonic biosensor

  • Astúa, Alejandro
  • Estevez, Maria Carmen
  • Luque Pardos, Sònia
  • Grau Cerrato, Santiago
  • Sorli Redó, M. Luisa
  • Montero, Maria Milagro
  • Horcajada Gallego, Juan Pablo
  • Lechuga, Laura M.
Innovative diagnostic tools that enhance antibiotic routine monitoring can improve the management of infections caused by antibiotic-resistant bacteria. Therapeutic drug monitoring (TDM) involves measuring drug levels in the patient bloodstream to ensure optimal efficacy and safety, particularly for drugs with a narrow therapeutic index (TI), assisting in dosage control and toxicity risk management. Amikacin (AK) and colistin (CS) are crucial antibiotics for treating multidrug-resistant (MDR) bacteria but they have side effects that require a precise TDM to try to minimize them. Current analytical techniques like immunoassays, high-performance liquid chromatography (HPLC), and liquid chromatography-mass spectrometry (LC-MS) are gold standards for the antibiotic analysis, but they may require transferring the human samples to centralized facilities, delaying crucial results and turnaround time. In contrast, plasmonic biosensors offer advantages for clinical diagnostics, enabling real-time drug detection with minimal sample volume and processing, being ideal for point-of-care applications. We have implemented plasmonic biosensors to quantify and rapidly monitor blood levels of amikacin and colistin. The biosensors provide high specificity and sensitivity, with limits of detection (LOD) of 0.92 ng/mL (1.57 nM) for amikacin and 9.11 pg/mL (7.88 pM) for colistin in blood serum. Statistics analyses demonstrated a strong correlation between the biosensor evaluation and the standard analytical methods (Spearman's correlation coefficient of 0.9171 (p-value < 0.001) and 0.7435 (p-value = 0.04) for amikacin and colistin, respectively). Our plasmonic biosensors offer in addition, simplicity, portability, and label-free evaluation, with multiplexed capabilities. The rapid turnaround of results in under 20 min, coupled with minimal sample processing, enhances the feasibility of personalized TDM, supporting tailored treatment strategies that can improve patient outcomes. This work lays the foundation for creating an integrated point-of-care biosensor platform for effectively performing TDM of antibiotics and other drugs in real-time at the patient's bedside in clinical settings., We acknowledge the financial support received for the PHITBAC project (PLEC2021-007739), funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. A.A. acknowledges the financial support from the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 754397. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The nanoB2A is a consolidated research group (‘Grup de Recerca’) of the Generalitat de Catalunya and is supported by the Departament de Recerca i Universitats de la Generalitat de Catalunya (no. 2021 SGR 00456).
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Water soluble organometallic small molecules as promising antibacterial agents: synthesis, physical–chemical properties and biological evaluation to tackle bacterial infections

  • Bennour, Ines
  • Choquesillo Lazarte, Duane
  • Martínez Medina, Margarita
This work was supported by the Spanish Ministerio de Economia y Competitividad (PID2019-106832RB-100, and SAF2017-82261-P grant cofounded by the European Regional Development Fund) and the Generalitat de Catalunya (2017SGR1720). J. A. M. Xavier acknowledges DOC-FAM program under the Marie Sklodowska-Curie grant agreement N degrees 754397. A. B. Buades, M. Nuez and J. A. M. Xavier are enrolled in the PhD program of the UAB., The Na[3,3’-Fe(8-I-1,2-C2B9H10)2] and Na[2,2’-M(1,7-C2B9H11)] (M = Co3+, Fe3+) small molecules are synthesized and the X-ray structures of [(H3O)(H2O)5][2,2’-Co(1,7-C2B9H11)2] and [Cs(MeCN)][8,8’-I2-Fe(1,2 C2B9H10)2], both displaying a transoid conformation of the [M(C2B9)2]− framework, are reported. Importantly, the supramolecular structure of [(H3O)(H2O)5][2,2’-Co(1,7-C2B9H11)2] presents 2D layers leading to a lamellar arrangement of the anions while the cation layers form polymeric water rings made of six- and fourmembered rings of water molecules connected via OH⋯H hydrogen bonds; B–H⋯O contacts connect the cationic and anionic layers. Herein, we highlight the influence of the ligand isomers (ortho-/meta-), the metal effect (Co3+/Fe3+) on the same isomer, as well as the influence of the presence of the iodine atoms on the physical–chemical and biological properties of these molecules as antimicrobial agents to tackle antibioticresistant bacteria, which were tested with four Gram-positive bacteria, five Gram-negative bacteria, and three Candida albicans strains that have been responsible for human infections. We have demonstrated an antimicrobial effect against Candida species (MIC of 2 and 3 nM for Na[3,3’-Co(8-I-1,2-C2B9H10)2] and Na[2,2’-Co (1,7-C2B9H11)2], respectively), and against Gram-positive and Gram-negative bacteria, including multiresistant MRSA strains (MIC of 6 nM for Na[3,3’-Co(8-I-1,2-C2B9H10)2]). The selectivity index for antimicrobial activity of Na[3,3’-Co(1,2-C2B9H11)2] and Na[3,3’-Co(8-I-1,2-C2B9H10)2] compounds is very high (165 and 1180, respectively), which reveals that these small anionic metallacarborane molecules may be useful to tackle antibioticresistant bacteria. Moreover, we have demonstrated that the outer membrane of Gram-negative bacteria constitutes an impermeable barrier for the majority of these compounds. Nonetheless, the addition of two iodine groups in the structure of the parent Na[3,3’-Co(1,2-C2B9H11)2] had an improved effect (3–7 times) against Gram-negative bacteria. Possibly the changes in their physical–chemical properties make the meta-isomers and the ortho-di-iodinated small molecules more permeable for crossing this barrier. It should be emphasized that the most active metallabis(dicarbollide) small molecules are both transoid conformers in contrast to the ortho- [3,3’-Co(1,2-C2B9H11)2]− that is cisoid. The fact that these small molecules cross the mammalian membrane and have antimicrobial properties but low toxicity for mammalian cells (high selectivity index, SI) represents a promising tool to treat infectious intracellular bacteria. Since there is an urgent need for antibiotic discovery and development, this study represents a relevant advance in the field., Spanish Government PID2019-106832RB-100 SAF2017-82261-P, Generalitat de Catalunya, General Electric 2017SGR1720, DOC-FAM program under the Marie Sklodowska-Curie grant 754397
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

How to switch from a poor PEDOT:X oxygen evolution reaction (OER) to a good one. A study on dual redox reversible PEDOT:metallacarborane

  • Maria Xavier, Jewel Ann
  • Fuentes, Isabel
  • Nuez-Martínez, Miquel
  • Kelemen, Zsolt
  • Andrio, Andreu
  • Viñas, Clara
  • Teixidor, Francesc
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Over the years, extensive research has been carried out to optimize the oxygen evolution reaction (OER) by adopting different techniques as well as catalysts. Conducting organic polymers such as PEDOT have been employed to study the reaction but have failed to lower the over-potential for the reaction. Here we show electrochemically made, intimately blended, dual redox reversible materials incorporating PEDOT and metallacarboranes. The metallacarboranes act as doping agents but with tunable E-1/2 potentials. The tunability of E-1/2 allows the overlapping of the two redox potentials which subsequently leads to their synergy. The physico-chemical properties of the metallacarboranes fade and become integrated with PEDOT to form a dual redox reversible system. Therefore, the properties of the dopant are modified by the polymer. Thus, due to its high E-1/2, the Co4+/3+ couple would not be an efficient electrocatalyst for water oxidation but when it is immersed in the PEDOT matrix the Co4+/3+ potential is more accessible so that very low overpotential values are obtained, which justifies the title of the work, How to switch from a poor PEDOT:X oxygen evolution reaction (OER) to a good one. The dual redox reversible system has been extensively characterized and has been shown to be a promising candidate for the water oxidation reaction., Jewel A. M. Xavier and Isabel Fuentes have contributed equally to this work. We gratefully acknowledge the Spanish Ministerio de Economía y Competitividad (PID2019-106832RB-I00) and Generalitat de Catalunya (2017SGR1720). Jewel A. M. Xavier acknowledges the DOC-FAM programme under the Marie Sklodowska-Curie grant agreement no. 754397. This work was also funded by the Spanish Ministry of Science, through the "Severo Ochoa" Programme for Centers of Excellence in R&D (CEX2019-000917-S). Jewel A. M. Xavier and Miquel N. M are enrolled in the PhD program of UAB.
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

CCL21-loaded 3D hydrogels for T cell expansion and differentiation

  • Pérez del Río, Eduardo
  • Santos, Fabião
  • Rodriguez Rodriguez, Xavier
  • Martínez-Miguel, Marc
  • Roca-Pinilla, Ramon
  • Alomar, Oscar
  • Garcia-Fruitos, Elena
  • Veciana, Jaume
  • Spatz, Joachim P.
  • Ratera, Imma
  • Guasch, Judith
Recent achievements in the field of immunotherapy, such as the development of engineered T cells used in adoptive cell therapy, are introducing more efficient strategies to combat cancer. Nevertheless, there are still many limitations. For example, these T cells are challenging to manufacture, manipulate, and control. Specifically, there are limitations in producing the large amounts of therapeutic T cells needed for these therapies in a short period of time and in an economically viable manner. In this study, three-dimensional (3D) poly(ethylene) glycol (PEG) hydrogels covalently combined with low molecular weight heparin are engineered to resemble the lymph nodes, where T cells reproduce. In these hydrogels, PEG provides the needed structural and mechanical properties, whereas heparin is used as an anchor for the cytokine CCL21, which is present in the lymph nodes, and can affect cell migration and proliferation. The 3D structure of the hydrogel in combination with its loading capacity result in an increased primary human CD4+ T cell proliferation compared to the state-of-the-art expansion systems consisting of artificial antigen presenting cells. Thus, we present a new tool for adoptive cell therapy to help achieving the large numbers of cells required for therapy of selected phenotypes targeted against cancer cells, by mimicking the lymph nodes., info:eu-repo/semantics/publishedVersion
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Engineering tissue barrier models on hydrogel microfluidic platforms

  • Vera, Daniel
  • García Díaz, María
  • Torras Andrés, Núria
  • Alvarez, Mar
  • Villa, Rosa
  • Martínez Fraiz, Elena
Tissue barriers play a crucial role in human physiology by establishing tissue compartmentalization and regulating organ homeostasis. At the interface between the extracellular matrix (ECM) and flowing fluids, epithelial and endothelial barriers are responsible for solute and gas exchange. In the past decade, microfluidic technologies and organ-on-chip devices became popular as in vitro models able to recapitulate these biological barriers. However, in conventional microfluidic devices, cell barriers are primarily grown on hard polymeric membranes within polydimethylsiloxane (PDMS) channels that do not mimic the cell¿ECM interactions nor allow the incorporation of other cellular compartments such as stromal tissue or vascular structures. To develop models that accurately account for the different cellular and acellular compartments of tissue barriers, researchers have integrated hydrogels into microfluidic setups for tissue barrier-on-chips, either as cell substrates inside the chip, or as self-contained devices. These biomaterials provide the soft mechanical properties of tissue barriers and allow the embedding of stromal cells. Combining hydrogels with microfluidics technology provides unique opportunities to better recreate in vitro the tissue barrier models including the cellular components and the functionality of the in vivo tissues. Such platforms have the potential of greatly improving the predictive capacities of the in vitro systems in applications such as drug development, or disease modeling. Nevertheless, their development is not without challenges in their microfabrication. In this review, we will discuss the recent advances driving the fabrication of hydrogel microfluidic platforms and their applications in multiple tissue barrier models.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Effects of solar irradiation on thermally driven CO2 methanation using Ni/CeO2-based catalyst

  • Golovanova, Viktoria
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Golovanov, Viacheslav
  • Rantala, Tapio T.
  • Andreu Arbella, Teresa
  • Morante i Lleonart, Joan Ramon
Utilization of the renewable energy sources is one of the main challenges in the state-of-the-art technologies for CO2 recycling. Here we have taken advantage of the solar light harvesting in the thermocatalytic approach to carbon dioxide methanation. The large-surface-area Ni/CeO2 catalyst produced by a scalable low-cost method was characterized and tested in the dark and under solar light irradiation conditions. Light-assisted CO2 con-version experiments as well as in-situ DRIFT spectrometry, performed at different illumination intensities, have revealed a dual effect of the incident photons on the catalytic properties of the two-component Ni/CeO2 catalyst. On the one hand, absorbed photons induce a localized surface plasmon resonance in the Ni nanoparticles fol-lowed by dissipation of the heat to the oxide matrix. On the other hand, the illumination activates the photo-catalytic properties of the CeO2 support, which leads to an increase in the concentration of the intermediates being precursor for methane production. Analysis of the methane production at different temperatures and illumination conditions has shown that the methanation reaction in our case is controlled by a photothermally- activated process. The used approach has allowed us to increase the reaction rate up to 2.4 times and conse-quently to decrease the power consumption by 20 % under solar illumination, thus replacing the conventional thermal activation of the reaction with a green energy source.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Adaptation of Cu(In, Ga)Se2 photovoltaics for full unbiased photocharge of integrated solar vanadium redox flow batteries

  • Murcia López, Sebastián
  • Chakraborty, Monalisa
  • Carretero, Nina M.
  • Flox, Cristina
  • Morante i Lleonart, Joan Ramon
  • Andreu Arbella, Teresa
The integration of photovoltaics and vanadium redox flow batteries (VRFBs) is a promising alternative for the direct conversion and storage of solar energy in a single device, considering their inherent higher energy density versus other redox pairs. However, this integration is not seamless unless the photovoltaic system is customized to the voltage needs of the battery, which unlike artificial photosynthesis, continuously increase with the state-of-charge. We have developed an integrated solar VRFB with adapted low-cost Cu(In, Ga)Se2 modules of 3 and 4 series-connected cells (solar efficiency of mini-solar module 8.1%), and considering the voltage requirements (1.3-1.6 V), we have evaluated the influence of the photovoltaic operation region on the final efficiency of the solar VRFB. Full unbiased photocharge under 1 Sun illumination has been achieved resulting in high energy (77%), solar-to-charge (7.5%) and overall round trip energy conversion efficiencies (5.0%) exceeding the values reported in the literature for other solar VRFBs, thus demonstrating the feasibility and intrinsic potential of adapting low-cost commercial photovoltaics to such energy storage systems.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methods and Protocols for reliable electrochemical testing in post Li batteries (Na, K, Mg and Ca)

  • Dugas, Romain
  • Forero Saboya, Juan
  • Ponrouch, Alexandre
While less mature than Li-ion battery, technologies based on Na, K, Mg and Ca are attracting more and more attention from the battery community. New material (cathode, anode or electrolyte) testing for these post Li systems commonly involves the use of an electrochemical setup called half-cell in which metal counter and reference electrodes are used. Here we firstly describe the different issues that become critical when moving away from Li with respect to the cell hardware (cell design, current collector, separator, insulator) and the nature of counter and reference electrodes. Workarounds are given and a versatile setup is proposed to run reliable electrochemical tests for post Li battery materials in general, in a broad range of electrolyte compositions., Funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 715087) and doctoral cofund program H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397) is acknowledged. Financial support from the Spanish Ministry for Economy, Industry and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) is also acknowledged. R.D. acknowledges support of the Beatriu de Pinós postdoctoral programme of the Government of Catalonia’s Secretariat for Universities and Research of the Ministry of Economy and Knowledge (2017 BP 00187), We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cation Solvation and Physico-Chemical Properties of Ca Battery Electrolytes

  • Forero Saboya, Juan
  • Marchante, Elena
  • Neves de Araújo, Rafael Barros
  • Monti, Damien
  • Johansson, Patrik
  • Ponrouch, Alexandre
Divalent cation based batteries are being considered as potential high energy density storage devices. The optimization of electrolytes for these technologies is, however, still largely lacking. Recent demonstration of the feasibility of Ca and Mg plating and stripping in the presence of a passivation layer or an artificial interphase has paved the way for more diverse electrolyte formulations. Here we exhaustively evaluate several Ca based electrolytes with different salts, solvents and concentrations, via measuring physico-chemical properties and using vibrational spectroscopy. Some comparisons with Mg and Li based electrolytes are made in order to highlight the unique properties of the Ca2+ cation. The Ca-salt solubility is found to be a major issue, calling for development of new highly dissociative salts. Nonetheless, reasonable salt solubility and dissociation was achieved using TFSI, BF4 and triflate anion based electrolytes and high permittivity solvents such as EC, PC, gBL and DMF. The local Ca2+ coordination is concentration dependent and rather complex, possibly involving bidentate coordination and participation of the nitrogen atom of DMF. The ionicity and the degree of ion-pair formation were both investigated and found to be strongly dependent on the nature of the cation, solvent donicity and salt concentration. The large ion-ion interaction energies of the contact ion-pairs, confirmed by DFT calculations, are expected to play a major role in the interfacial processes, and thus we here provide electrolyte design strategies to engineer the cation solvation and possibly improve the power performance of divalent battery systems., Funding from the European Union’s Horizon 2020 research and innovation program H2020 is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement No. 715087), FETOPEN-1-2016-2017 (CARBAT, grant agreement No. 766617), and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement No. 754397). A.P. is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0496). P.J. acknowledges financial support from the Swedish Energy Agency (contract #37671-1, Next Generation Batteries) and Chalmers Battery Initiative, part of the profile Materials for Energy Applications jointly managed by the Areas of Advance Materials Science and Energy at the Chalmers University of Technology, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How nanophotonic label-free biosensors can contribute to rapid and massive diagnostics of respiratory virus infections: COVID-19 case

  • Soler, María
  • Estévez, M. Carmen
  • Cardeñosa-Rubio, María
  • Astua, Alejandro
  • Lechuga, Laura M.
The global sanitary crisis caused by the emergence of the respiratory virus SARS-CoV-2 and the COVID-19 outbreak has revealed the urgent need for rapid, accurate, and affordable diagnostic tests to broadly and massively monitor the population in order to properly manage and control the spread of the pandemic. Current diagnostic techniques essentially rely on polymerase chain reaction (PCR) tests, which provide the required sensitivity and specificity. However, its relatively long time-to-result, including sample transport to a specialized laboratory, delays massive detection. Rapid lateral flow tests (both antigen and serological tests) are a remarkable alternative for rapid point-of-care diagnostics, but they exhibit critical limitations as they do not always achieve the required sensitivity for reliable diagnostics and surveillance. Next-generation diagnostic tools capable of overcoming all the above limitations are in demand, and optical biosensors are an excellent option to surpass such critical issues. Label-free nanophotonic biosensors offer high sensitivity and operational robustness with an enormous potential for integration in compact autonomous devices to be delivered out-of-the-lab at the point-of-care (POC). Taking the current COVID-19 pandemic as a critical case scenario, we provide an overview of the diagnostic techniques for respiratory viruses and analyze how nanophotonic biosensors can contribute to improving such diagnostics. We review the ongoing published work using this biosensor technology for intact virus detection, nucleic acid detection or serological tests, and the key factors for bringing nanophotonic POC biosensors to accurate and effective COVID-19 diagnosis on the short term., M.C.C. and A.A. acknowledge financial support from European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement (No. 754510 and No. 754397, respectively). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by AEI (grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High frequency response of thick REBCO coated conductors in the framework of the FCC study

  • Romanov, Artur
  • Krkotić, Patrick
  • Telles, Guilherme
  • O’Callaghan, Joan
  • Pont, Montse
  • Pérez, Francis
  • Granados, Xavier
  • Calatroni, Sergio
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre
A thorough microwave response study of high temperature superconductors, considered as an alternative beam screen coating, has become integral in the design decisions for CERN’s future research infrastructure. Here, we present the surface resistance Rs of various REBa2Cu3O7−x (RE = rare earth) coated conductors available in large scale as a function of magnetic field in a broad temperature range measured by a Hakki–Coleman type resonator with resonant frequency ν≈8GHz. Analysis of the high frequency dissipation supported by DC transport characterization reveals the vortex dynamics in thick REBa2Cu3O7−x films. Determined microscopic vortex parameters span over a wide range of magnitudes and reflect the relevance of the superconducting layer’s microstructure. We demonstrate that the depinning frequencies ν0 surpass ν, which confirms the operation in high performing, low dissipation pinning regime at measurement conditions. Surface impedance extrapolation to FCC-hh conditions points towards a significant outperformance of copper by coated conductors in terms of surface resistance. The surface resistance margins would open up potential ways for a more efficient frontier circular collider., Authors acknowledge the support and samples provided by Bruker HTS GmbH, Fujikura Ltd., Sunam Co., SuperOx, SuperPower Inc. and THEVA Dünnschichttechnik GmbH. Authors acknowledge CERN funding FCC-GOV-CC-0073/ 1724666/KE3359, MAT2014-51778-C2 COACHSUPENERGY, RTI2018-095853-B-C21 SuMaTe from MICINN and co-financing by the European Regional Development Fund; 2017-SGR 1519 from Generalitat de Catalunya and COST Action NANOCO-HYBRI (CA16218) from EU. Authors acknowledge Prof. Ruggero Vaglio for sharing his knowledge on vortex physics inferable from surface resistance measurements in several project meetings. ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496 and its Future Interdisciplinary Projects action. UPC funding was provided through the Unit of Excellence María de Maeztu MDM2016-0600. JG acknowledges MSCA-COFUND-2014-665919 for financial support. AR acknowledges MSCA-COFUND-2016-754397 for PhD grant and would like to thank Prof. Enrico Silva, Prof. Nicola Pompeo, Dr. Kostiantyn Torokhtii and Andrea Alimenti from University Roma Tre for hosting him in their laboratory part of which were most helpful discussions on RF measurement techniques., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the nature of the passivation layer enabling reversible calcium plating

  • Forero Saboya, Juan
  • Davoisne, Carine
  • Dedryvère, Rémi
  • Yousef, Ibraheem
  • Canepa, Pieremanuele
  • Ponrouch, Alexandre
As for other multivalent systems, the interface between the calcium (Ca) metal anode and the electrolyte is of paramount importance for reversible plating/stripping. Here, we combined experimental and theoretical approaches to unveil the potential solid electrolyte interphase (SEI) components enabling facile Ca plating. Borates compounds, in the form of cross-linked polymers are suggested as divalent conducting component. A pre-passivation protocol with such SEI is demonstrated and allows to broaden the possibility for electrolyte formulation. We also demonstrated a 10-fold increase in Ca plating kinetics by tuning the cation solvation structure in the electrolyte limiting the degree of contact ion pair., Funding from the European Union's Horizon 2020 research and innovation program H2020 is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement no. 715087) and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement no. 754397). A. Ponrouch is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) and to Prof. D. Lemordant (Tours University, France) for stimulating discussions. P. Canepa acknowledges funding from the National Research Foundation under his NRFF NRFF12-2020-0012 and the ANR-NRF NRF2019-NRF-ANR073 Na-MASTER. P. Canepa acknowledges the National Supercomputing Centre, Singapore (https://www.nscc.sg). This work has been done in the frame of the Doctoral Degree Program in Materials Science by the Universitat Autònoma de Barcelona. The FTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CCL21-loaded 3D hydrogels for T cell expansion and differentiation

  • Pérez del Río, Eduardo
  • Santos, Fabiao
  • Rodríguez Rodríguez, Xavier
  • Martínez Miguel, Marc
  • Roca Pinilla, Ramon
  • Arís, Anna
  • García Fruitós, Elena
  • Veciana, Jaume
  • Spatz, Joachim P.
  • Ratera, Immaculada
  • Guasch, Judit
Recent achievements in the field of immunotherapy, such as the development of engineered T cells used in adoptive cell therapy, are introducing more efficient strategies to combat cancer. Nevertheless, there are still many limitations. For example, these T cells are challenging to manufacture, manipulate, and control. Specifically, there are limitations in producing the large amounts of therapeutic T cells needed for these therapies in a short period of time and in an economically viable manner. In this study, three-dimensional (3D) poly(ethylene) glycol (PEG) hydrogels covalently combined with low molecular weight heparin are engineered to resemble the lymph nodes, where T cells reproduce. In these hydrogels, PEG provides the needed structural and mechanical properties, whereas heparin is used as an anchor for the cytokine CCL21, which is present in the lymph nodes, and can affect cell migration and proliferation. The 3D structure of the hydrogel in combination with its loading capacity result in an increased primary human CD4+ T cell proliferation compared to the state-of-the-art expansion systems consisting of artificial antigen presenting cells. Thus, we present a new tool for adoptive cell therapy to help achieving the large numbers of cells required for therapy of selected phenotypes targeted against cancer cells, by mimicking the lymph nodes., We acknowledge D. P. Rosenblatt for proofreading this manuscript and the “Servei de Microscòpia” from UAB for assistance in the confocal microscopy. The authors are grateful for the financial support received from the Spanish Ministry of Economy and Competitiveness MINECO (MAT2016-80826-R, PID2019-105622RBI00, the “Ramón y Cajal” program (RYC-2017-22614), and a DOC-INIA fellowship), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) through the projects “Alycia” (Nr. BBN18PI01) and “Gels4ACT” (Nr. BBN20PIV02), Generalitat de Catalunya (SGR-918, SGR-229, CERCA Programme, and AGAUR for a pre‐doctoral fellowship (FI-AGAUR)), Fundació Marató de TV3 (Nr. 201812), and the European Social Fund. This research was also supported by the People Programme (Marie Curie Actions) of the 7th Framework Programme of the European Union (FP7/2007–2013) through the grant agreement Nr. 600388 of REA with the Agency for Business Competitiveness ACCIÓ through a Tecniospring fellowship (TECSPR15-1-0015) and the European Union's Horizon 2020 research and innovation programme H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397). The work was funded as well by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany). ICMAB-CSIC acknowledges support from the MINECO through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496; FIP fellowship). This work has been developed inside the biochemistry and biomedicine PhD program of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Noncovalently Linked Metallacarboranes on Functionalized Magnetic Nanoparticles as Highly Efficient, Robust, and Reusable Photocatalysts in Aqueous Medium

  • Guerrero, Isabel
  • Saha, Arpita
  • Xavier, Jewel Ann Maria
  • Viñas, Clara
  • Romero, Isabel
  • Teixidor, Francesc
A successful homogeneous photoredox catalyst has been fruitfully heterogenized on magnetic nanoparticles (MNPs) coated with a silica layer, keeping intact its homogeneous catalytic properties but gaining others due to the easy magnetic separation and recyclability. The amine-terminated magnetic silica nanoparticles linked noncovalently to H[3,3′-Co(1,2-C2B9H11)2]− (H[1]), termed MSNPs-NH2@H[1], are highly stable and do not produce any leakage of the photoredox catalyst H[1] in water. The magnetite MNPs were coated with SiO2 to provide colloidal stability and silanol groups to be tethered to amine-containing units. These were the MSNPs-NH2 on which was anchored, in water, the cobaltabis(dicarbollide) complex H[1] to obtain MSNPs-NH2@H[1]. Both MSNPs-NH2 and MSNPs-NH2@H[1] were evaluated to study the morphology, characterization, and colloidal stability of the MNPs produced. The heterogeneous MSNP-NH2@H[1] system was studied for the photooxidation of alcohols, such as 1-phenylethanol, 1-hexanol, 1,6-hexanediol, or cyclohexanol among others, using catalyst loads of 0.1 and 0.01 mol %. Surfactants were introduced to prevent the aggregation of MNPs, and cetyl trimethyl ammonium chloride was chosen as a surfactant. This provided adequate stability, without hampering quick magnetic separation. The results proved that the catalysis could be speeded up if aggregation was prevented. The recyclability of the catalytic system was demonstrated by performing 12 runs of the MSNPs-NH2@H[1] system, each one without loss of selectivity and yield. The cobaltabis(dicarbollide) catalyst supported on silica-coated magnetite nanoparticles has proven to be a robust, efficient, and easily reusable system for the photooxidation of alcohols in water, resulting in a green and sustainable heterogeneous catalytic system., This research has been financed by MINECO (CTQ2016-75150-R and CTQ2015-66143-P) and Generalitat de Catalunya (2017 SGR 1720). The “Severo Ochoa” Program for Centers of Excellence in R&D 234 (SEV-2015-0496) is appreciated. J.A.M.X. thanks the DOC-FAM programme funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 754397., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Operando Synchrotron X-ray Diffraction Studies on TiS2: The Effect of Propylene Carbonate on Reduction Mechanism

  • Houdeville, Raphaëlle G.
  • Black, Ashley P.
  • Ponrouch, Alexandre
  • Palacín, M. Rosa
  • Fauth, François
We present herein a systematic study of solvent co-intercalation during electrochemical reduction of titanium disulfide in lithium cells using state of the art in situ cells and synchrotron X-ray diffraction. To understand the role of the electrolyte components, four salts (LiBF4, LiBOB, LiPF6 and LiTFSI) and three solvents (ethylene carbonate, propylene carbonate and dimethyl carbonate) were investigated. Various types of in situ cells were assembled and X-ray diffraction patterns were collected in operando upon cycling. Co-intercalated phase formation was found to be triggered by the presence of propylene carbonate and to be electrochemically driven. This co-intercalated phase is formed in the early stages of reduction, with cell parameters a = 3.514 Å, c = 17.931 Å, corresponding approximately to a tripling of the pristine TiS2 cell along the c-axis. This phase does not seem to evolve upon further oxidation and hence induces an overall loss of capacity. Whereas the nature of the anion does not appear to influence the co-intercalated phase formation, the content of propylene carbonate in the electrolyte is clearly correlated to both its amount and the extent of capacity loss., The authors acknowledge funding from Ministry of Science and Innovation through grant MAT2017–86616-R, from the "Severo Ochoa" Programme for Centres of Excellence in R&D (CEX2019-000917-S). This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement N° 754397. The ALBA synchrotron is acknowledged for provision of beamtime within the in-house project program (proposals 2019013225 and 2020014004)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A boron-based electrolyte additive for calcium electrodeposition

  • Forero Saboya, Juan
  • Bodin, Charlotte
  • Ponrouch, Alexandre
In recent years, several organic electrolytes have been reported allowing calcium metal electrodeposition. In all cases, some degree of passivation on the surface of the calcium electrode was reported. Following a recent report on borate-based passivation layer playing a crucial role for Ca plating in electrolyte solutions containing Ca(BF4)2, here we report the use of a boron-containing additive. The presence of this additive allows Ca plating and stripping using a Ca(TFSI)2 containing electrolyte, which otherwise lead to the formation of a fully Ca2+ blocking passivation layer., Funding from the European Union’s Horizon 2020 research and innovation program H2020 is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement no. 715087) and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement no. 754397). A. Ponrouch is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). This work has been done in the frame of the Doctoral Degree Program in Materials Science by the Universitat Autònoma de Barcelona. Alistore-European Research Institute is gratefully acknowledged for financial support through the postdoc grant to C. Bodin., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Operando Synchrotron X-ray Diffraction in Calcium Batteries: Insights into the Redox Activity of 1D Ca3CoMO6 (M = Co and Mn)

  • Black, Ashley P.
  • Monti, Damien
  • Frontera, Carlos
  • Tchitchekova , Deyana S.
  • Houdeville, Raphaëlle G.
  • Fauth, François
  • Palacín, M. Rosa
1D Ca3Co2–zMzO6 (M = Co z = 0, M = Mn z = 1, and M = Fe z = 0.4) were prepared and tested electrochemically. While the iron-containing phase was not found to be active, the iron- and manganese-containing phases were found to be potentially interesting as positive electrode materials for calcium metal-based high-energy battery technologies and were investigated by operando synchrotron X-ray diffraction. Results indicate that electrochemically driven calcium deintercalation from the crystal structure (ca. 0.7 mol per formula unit) takes place upon oxidation in both cases. The oxidized phases have incommensurate modulated crystal structures with the space group R 3m(00γ)0s and a = 9.127(1) Å, c1 = 2.4226(3) Å and c2 = 4.1857(3) Å, and γ = 0.579 (M = Co) and a = 9.217(1) Å, c1 = 4.9076(4) Å and c2 = 4.3387(4) Å, and γ = 1.139 (M = Mn), which exhibit differences due to the presence of manganese and Mn/Co ordering. The degree of calcium re-intercalation within the structure was found to be extremely limited, if any. Complementary experiments carried out in lithium cells did not show any reversibility either, thus pointing at intrinsic structural/migration constraints in the oxidized phase rather than slow kinetics of high desolvation energies associated with divalent ion charge carriers., The authors are grateful to Alexandre Ponrouch and ALISTORE-ERI members for helpful discussions and to ALBA synchrotron for beamtime (proposal 2019073634). ICMAB-CSIC members thank the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). D.M. acknowledges the EC for a H2020 MSCA-IF grant (contract number 743439). R.G.H. acknowledges the EC for a H2020 MSCADOC-FAM grant (contract number 754397)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2021 roadmap for sodium-ion batteries

  • Tapia Ruiz, Nuria
  • Forero Saboya, Juan
  • Ponrouch, Alexandre
  • Younesi, Reza
Tapia-Ruiz, Nuria et al., Increasing concerns regarding the sustainability of lithium sources, due to their limited availability and consequent expected price increase, have raised awareness of the importance of developing alternative energy-storage candidates that can sustain the ever-growing energy demand. Furthermore, limitations on the availability of the transition metals used in the manufacturing of cathode materials, together with questionable mining practices, are driving development towards more sustainable elements. Given the uniformly high abundance and cost-effectiveness of sodium, as well as its very suitable redox potential (close to that of lithium), sodium-ion battery technology offers tremendous potential to be a counterpart to lithium-ion batteries (LIBs) in different application scenarios, such as stationary energy storage and low-cost vehicles. This potential is reflected by the major investments that are being made by industry in a wide variety of markets and in diverse material combinations. Despite the associated advantages of being a drop-in replacement for LIBs, there are remarkable differences in the physicochemical properties between sodium and lithium that give rise to different behaviours, for example, different coordination preferences in compounds, desolvation energies, or solubility of the solid–electrolyte interphase inorganic salt components. This demands a more detailed study of the underlying physical and chemical processes occurring in sodium-ion batteries and allows great scope for groundbreaking advances in the field, from lab-scale to scale-up. This roadmap provides an extensive review by experts in academia and industry of the current state of the art in 2021 and the different research directions and strategies currently underway to improve the performance of sodium-ion batteries. The aim is to provide an opinion with respect to the current challenges and opportunities, from the fundamental properties to the practical applications of this technology., The authors gratefully acknowledge RS2E and Alistore-ERI for funding their research into Na-ion batteries. The funding received from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 646433 (NAIADES), the Swedish Research Council, the Swedish Energy Agency (#37671-1), and the Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning (FORMAS), are all gratefully acknowledged. The many fruitful discussions within ALISTORE-ERI, and especially with M Rosa Palacín, have been most valuable. P J is also grateful for the continuous support from several of the Chalmers Areas of Advance: Materials Science and Energy. Funding from the European Union’s innovation program H2020 is acknowledged: H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397). A Ponrouch is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully supercritical CO2 preparation of a nanostructured MOF composite with application in cutaneous drug delivery

  • Kubovics, Márta
  • Rojas, Sara
  • López Periago, Ana M.
  • Fraile, Julio
  • Horcajada, Patricia
  • Domingo Pascual, M. Concepción
Supercritical CO2 (scCO2) technology is used here as an efficient method to assist in the preparation of a cutaneous polymeric formulation based on drug containing metal-organic framework composites. The supercritical fluid is used in three steps: (i) as a drying agent for the nanosized mesoporous matrix, (ii) as the impregnation vector of a topical antibiotic drug, and (iii) as a plasticizing and foaming fluid to obtain dispersions of the hybrid material into a biocompatible polymer, e.g., the macroporous patch. The materials were characterized using solid state techniques. The drug delivery and permeation profiles of the patches were investigated applying in vitro and ex vivo tests by using porcine skin. These analyses suggest that scCO2 impregnation is an easy and fast strategy to prepare composite devices able to progressively release and diffuse the incorporated drug throughout the skin, paving the way to efficiently prepare cutaneous devices for topical or systemic therapies., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019–000917-S) and the Spanish National Plan of Research with projects CTQ2017–83632 and PID2020–115631GB-I00 (Concepción Domingo, Ana M. López and Márta Kubovics). Sara Rojas and Patricia Horcajada acknowledge the regional Madrid founding (Talento 2017 Modality 2, 2017-T2/IND-5149), the MOFSEIDON project (PID2019–104228RB-I00, MCI/AEI/FEDER, UE), and the Multifunctional Metallodrugs in Diagnosis and Therapy Network (MICIU, RED2018–102471-T). Márta Kubovics acknowledge the financial support from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Cofund grant (agreement no MSCA-COFUND-DP/0320–754397). Patricia Horcajada acknowledges the Spanish Ramon y Cajal Programme (grant agreement no. 2014–16823). Sara Rojas acknowledges the Spanish Juan de la Cierva Incorporación Fellowship (grant agreement no. IJC2019–038894-I). This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by Márta Kubovics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Induced ligno-suberin vascular coating and tyramine-derived hydroxycinnamic acid amides restrict Ralstonia solanacearum colonization in resistant tomato

  • Kashyap, Anurag
  • Jiménez-Jiménez, Álvaro Luis
  • Capellades, Montserrat
  • Srinivasan, Sumithra Y.
  • Laromaine, Anna
  • Serra, Olga
  • Figueras, Mercè
  • Rencoret, Jorge
  • Gutiérrez Suárez, Ana
  • Valls, Marc
  • Coll, Núria S.
19 páginas.- 9 figuras.- referencias, Tomato varieties resistant to the bacterial wilt pathogen Ralstonia solanacearum have the ability to restrict bacterial movement in the plant. Inducible vascular cell wall reinforcements seem to play a key role in confining R. solanacearum into the xylem vasculature of resistant tomato. However, the type of compounds involved in such vascular physico-chemical barriers remain understudied, while being a key component of resistance. Here we use a combination of histological and live-imaging techniques, together with spectroscopy and gene expression analysis to understand the nature of R. solanacearum-induced formation of vascular coatings in resistant tomato. We describe that resistant tomato specifically responds to infection by assembling a vascular structural barrier formed by a ligno-suberin coating and tyramine-derived hydroxycinnamic acid amides. Further, we show that overexpressing genes of the ligno-suberin pathway in a commercial susceptible variety of tomato restricts R. solanacearum movement inside the plant and slows disease progression, enhancing resistance to the pathogen. We propose that the induced barrier in resistant plants does not only restrict the movement of the pathogen, but may also prevent cell wall degradation by the pathogen and confer anti-microbial properties, effectively contributing to resistance., Research is funded by MCIN/AEI/10.13039/501100011033 (NSC, MV), MCIN/AEI/PID2019-110330GB-C21 (MF, OS), MCIN/AEI/PID2020-118968RBI00 (JR), through the ‘Severo Ochoa Programme for Centres of Excellence in R&D’ (SEV-2015-0533, CEX2019-000917 and CEX2019-000902-S funded by MCIN/AEI/ 10.13039/501100011033), and by the Spanish National Research Council (CISC) pie-201620E081 (JR, AG) and the Generalitat de Catalunya (2017SGR765 grant). AK is the recipient of a Netaji Subhas – Indian Council of Agricultural Research International Fellowship. SS acknowledges financial support from DOC-FAM, European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 754397. This work was also supported by the CERCA Program/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlative 3D cryo X-ray imaging reveals intracellular location and effect of designed antifibrotic protein-nanomaterial hybrids

  • Groen, J.
  • Palanca, Ana R.
  • Aires, Antonio
  • Conesa, José J.
  • Maestro, David
  • Rehbein, Stefan
  • Harkiolaki, M.
  • Villar Ramos, Ana V.
  • Cortajarena, Aitziber L.
  • Pereiro, Eva
© 2021 The Author(s)., Revealing the intracellular location of novel therapeutic agents is paramount for the understanding of their effect at the cell ultrastructure level. Here, we apply a novel correlative cryo 3D imaging approach to determine the intracellular fate of a designed protein–nanomaterial hybrid with antifibrotic properties that shows great promise in mitigating myocardial fibrosis. Cryo 3D structured illumination microscopy (cryo-3D-SIM) pinpoints the location and cryo soft X-ray tomography (cryo-SXT) reveals the ultrastructural environment and subcellular localization of this nanomaterial with spatial correlation accuracy down to 70 nm in whole cells. This novel high resolution 3D cryo correlative approach unambiguously locates the nanomaterial after overnight treatment within multivesicular bodies which have been associated with endosomal trafficking events by confocal microscopy. Moreover, this approach allows assessing the cellular response towards the treatment by evaluating the morphological changes induced. This is especially relevant for the future usage of nanoformulations in clinical practices. This correlative super-resolution and X-ray imaging strategy joins high specificity, by the use of fluorescence, with high spatial resolution at 30 nm (half pitch) provided by cryo-SXT in whole cells, without the need of staining or fixation, and can be of particular benefit to locate specific molecules in the native cellular environment in bio-nanomedicine., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 754397. This work was partially supported by the European Research Council ERC-CoG-648071-ProNANO, ERC-PoC-841063-NIMM; Spanish State Research Agency, Spain; (BIO2015-72124-EXP), (MDM-2017-0720), (PID2019-111649RB-I00) and (RTI2018-095214-B-I00); the Basque Government (Elkartek KK-2017/00008; RIS3-2019222005); and the Next Generation and Innovation Valdecilla (PREVAL19/05), (IDIVAL INNVAL17/22), (INNVAL20/34), (NVAL18/11) and (NextVal 18/14). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720 (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Red light-emitting Carborane-BODIPY dyes: Synthesis and properties of visible-light tuned fluorophores with enhanced boron content

  • Bellomo, Chiara
  • Zanetti, Davide
  • Cardano, Francesca
  • Sinha, Sohini
  • Chaari, Mahdi
  • Fin, Andrea
  • Maranzana, Andrea
  • Núñez Aguilera, Rosario
  • Blangetti, Marco
  • Prandi, Cristina
A small library of 2,6- and 3,5-distyrenyl-substituted carborane-BODIPY dyes was efficiently synthesized by means of a Pd-catalyzed Heck coupling reaction. Styrenyl-carborane derivatives were exploited as molecular tools to insert two carborane clusters into the fluorophore core and to extend the π-conjugation of the final molecule in a single synthetic step. The synthetic approach allows to increase the molecular diversity of this class of fluorescent dyes by the synthesis of symmetric or asymmetric units with enhanced boron content. The structural characterization and the photoluminescence (PL) properties of synthesized dyes were evaluated, and the structure/properties relationships have been investigated by theoretical calculations. The developed compounds exhibit a significant bathochromic shift compared to their parent fluorophore scaffolds, and absorption and emission patterns were practically unaffected by the different substituents (Me or Ph) on the Ccluster atom (Cc) of the carborane cage or the cluster isomer (ortho- or meta-carborane). Remarkably, the presence of carborane units at 2,6-positions of the fluorophore produced a significant increase of the emission fluorescent quantum yields, which could be slightly tuned by changing the Cc-substituent and the carborane isomer, as well as introducing ethylene glycol groups at the meso-position of the BODIPY., We would like to acknowledge Dr. Emanuele Priola (UniTO) and Dr. Francesco Marra (UniTO) for technical support, and Prof. Claudio Medana (UniTO) for HRMS measurements. We acknowledge the italian MIUR, Huvepharma Italia srl, Regione Piemonte and Cassa di Risparmio di Torino for financial support. This research was funded by MINECO ((CTQ2016-75150-R) Agencia Estatal de Investigación AEI from MICINN (PID2019-106832RB-100/AEI/10.13039/501100011033) and Generalitat de Catalunya (2017 SGR1720). The work was also supported by the MICINN through the Severo Ochoa Program for Centers of Excellence FUNFUTURE (CEX2019-000917-S). Sohini Sinha was enrolled in the PhD Program of UAB. S. S. acknowledges financial support from DOC-FAM, European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 754397., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfaces and Interphases in Ca and Mg Batteries

  • Forero Saboya, Juan
  • Tchitchekova , Deyana S.
  • Johansson, Patrik
  • Palacín, M. Rosa
  • Ponrouch, Alexandre
The development of high energy density battery technologies based on divalent metals as the negative electrode is very appealing. Ca and Mg are especially interesting choices due to their combination of low standard reduction potential and natural abundance. One particular problem stalling the technological development of these batteries is the low efficiency of plating/stripping at the negative electrode, which relates to several factors that have not yet been looked at systematically; the nature/concentration of the electrolyte, which determines the mass transport of electro-active species (cation complexes) toward the electrode; the possible presence of passivation layers, which may hinder ionic transport and hence limit electrodeposition; and the mechanisms behind the charge transfer leading to nucleation/growth of the metal. Different electrolytes are investigated for Mg and Ca, with the presence/absence of chlorides in the formulation playing a crucial role in the cation desolvation. From a R&D point-of-view, proper characterization alongside modeling is crucial to understand the phenomena determining the mechanisms of the plating/stripping processes. The state-of-the-art is here presented together with a short perspective on the influence of the cation solvation also on the positive electrode and finally an attempt to define guidelines for future research in the field., J.D.F.-S. and D.S.T. contributed equally to this work. Funding from the European Union’s Horizon 2020 research and innovation programme ERC-2016-STG (CAMBAT Grant Agreement No. 715087) and H2020 FETOPEN-1-2016-2017 (CARBAT, Grant Agreement No. 766617) is gratefully acknowledged. ICMAB-CSIC members thank the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). J.D.F.-S. is grateful to 2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397). J.D.F.-S. contributed to this work in the frame of the Doctoral Degree Program in Materials Science by the Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of solar irradiation on thermally driven CO2 methanation using Ni/CeO2–based catalyst

  • Golovanova, Viktoria
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Golovanova, Liubov V.
  • Rantala, Tapio T.
  • Andreu, Teresa
  • Morante, Joan Ramón
Utilization of the renewable energy sources is one of the main challenges in the state-of-the-art technologies for CO recycling. Here we have taken advantage of the solar light harvesting in the thermocatalytic approach to carbon dioxide methanation. The large-surface-area Ni/CeO catalyst produced by a scalable low-cost method was characterized and tested in the dark and under solar light irradiation conditions. Light-assisted CO conversion experiments as well as in-situ DRIFT spectrometry, performed at different illumination intensities, have revealed a dual effect of the incident photons on the catalytic properties of the two-component Ni/CeO catalyst. On the one hand, absorbed photons induce a localized surface plasmon resonance in the Ni nanoparticles followed by dissipation of the heat to the oxide matrix. On the other hand, the illumination activates the photocatalytic properties of the CeO support, which leads to an increase in the concentration of the intermediates being precursor for methane production. Analysis of the methane production at different temperatures and illumination conditions has shown that the methanation reaction in our case is controlled by a photothermally-activated process. The used approach has allowed us to increase the reaction rate up to 2.4 times and consequently to decrease the power consumption by 20 % under solar illumination, thus replacing the conventional thermal activation of the reaction with a green energy source., This work has been done in the framework of the doctorate programme in Materials Science of the Autonomous University of Barcelona. V. Golovanova has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 754397. Authors acknowledge Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2017 SGR 1246) and the CSC – IT Center for Science, Espoo, Finland for provided resources. IREC also acknowledges additional support by the European Regional Development Funds (ERDF, FEDER) and by MINECO coordinated projects MAT2014-59961-C2, ENE2016-80788-C5-5-R and ENE2017-85087-C3. M. C. Spadaro and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 is supported by the Severo Ochoa programme from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya. M. C. Spadaro has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

o-Carborane-based fluorophores as efficient luminescent systems both as solids and as water-dispersible nanoparticles

  • Sinha, Sohini
  • Kelemen, Zsolt
  • Hümpfner, Evelyn
  • Ratera, Immaculada
  • Malval, Jean-Pierre
  • Jurado, José Piers
  • Viñas, Clara
  • Teixidor, Francesc
  • Núñez Aguilera, Rosario
This article is part of the themed collection: Boron Chemistry in the 21st Century: From Synthetic Curiosities to Functional Molecules, A set of o-carborane-appended π-conjugated fluorophores and their light-emitting properties in the solid state are reported. The aggregation-induced emission enhancement (AIEE) exhibited for one of the fluorenyl derivatives paved the way to successfully preparing o-carborane-containing organic nanoparticles (NPs) homogeneously dispersed in aqueous media that maintain their luminescence properties. Notably, NPs processed as thin films also show high fluorescence efficiency, suggesting potential optical and optoelectronic applications., This work was financially supported by MICINN (PID2019-106832RB-I00, PID2019-105622RB-I00 and the Severo Ochoa Program for Centers of Excellence for the FUNFUTURE CEX2019-000917-S project). S. S. acknowledges financial support from DOC-FAM, the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 754397. Z. K. is grateful for the general support of the Premium Postdoctoral Research Program 2019. We thank Dr Claudio Roscini from ICN2 for his kind help with the solid state luminescence measurements. Sohini Sinha is enrolled in the UAB PhD Program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Potential application of metallacarboranes as an internal reference: an electrochemical comparative study to ferrocene

  • Xavier, Jewel Ann Maria
  • Viñas, Clara
  • Lorenzo, Encarnación
  • García Mendiola, Tania
  • Teixidor, Francesc
Ferrocene and its derivatives have been extensively used as an internal reference in electrochemical processes. Yet, they possess limitations such as solvent restrictions that require chemical modifications. In this regard, we have studied the use of metallacarboranes [3,3'-M(1,2-C2B9H11)2]- (M = Co, Fe) as general internal reference systems and have proven their suitability by thoroughly investigating their electrochemical properties in both aqueous and organic electrolytes without any derivatization., This work was funded by the Spanish Ministry of Science, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (CEX2019-000917-S) as well as the Ministerio de Economia y Competitividad (PID2019-106832RB-I00), (PID2020- 116728RB-I00, CTQ2015-71955-RED ELECTROBIONET) and Generalitat de Catalunya (2017SGR1720) are appreciated. J. A. M. Xavier acknowledges DOC-FAM programme under the Marie Sklodowska-Curie grant agreement no. 754397 and is enrolled in the PhD programme in UAB. Support from the Community of Madrid (TRANSNANOAVANSENS S2018/NMT-4349), is acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced human T cell expansion with inverse opal hydrogels

  • Santos, Fabiao
  • Valderas Gutiérrez, Julia
  • Pérez del Río, Eduardo
  • Castellote Borrell, Miquel
  • Rodríguez Rodríguez, Xavier
  • Veciana, Jaume
  • Ratera, Immaculada
  • Guasch, Judit
Advanced personalized immunotherapies still have to overcome several biomedical and technical limitations before they become a routine cancer treatment in spite of recent achievements. In adoptive cell therapy (ACT), the capacity to obtain adequate numbers of therapeutic T cells in the patients following ex vivo treatment should be improved. Moreover, the time and costs to produce these T cells should be reduced. In this work, inverse opal (IOPAL) 3D hydrogels consisting of poly(ethylene) glycol (PEG) covalently combined with heparin were engineered to resemble the environment of lymph nodes, where T cells get activated and proliferate. The introduction of an IOPAL strategy allowed a precise control on the porosity of the hydrogels, providing an increase in the proliferation of primary human CD4+ T cells, when compared with state-of-the-art expansion systems. Additionally, the IOPAL hydrogels also showed a superior expansion compared to hydrogels with the same composition, but without the predetermined pore structure. In summary, we have shown the beneficial effect of having an IOPAL architecture in our 3D hydrogels to help achieving large numbers of cells, while maintaining the desired selected phenotypes required for ACT., We acknowledge D. P. Rosenblatt for proofreading this manuscript and “Servei de Microscòpia” from UAB for assistance in the confocal microscopy. This work has been developed inside the “Materials Science” PhD program of UAB. The authors are grateful for the financial support received from the Spanish Government (PID2020-115296RA-I00, PID2019-105622RBI00, and the “Ramón y Cajal” program (RYC-2017-22614)), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) through the projects “Alycia” (No. BBN18PI01) and “Gels4ACT” (No. BBN20PIV02), as well as CSIC for a JAE Intro fellowship. The work was funded as well by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany). This research was also supported by the European Union's Horizon 2020 research and innovation programme H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement no. 754397). ICMAB-CSIC acknowledges support from the Severo Ochoa programme for centres of excellence in R&D (FUNFUTURE, CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Graphene Oxide Aerogel Support on the CuZnO Catalytic Activity: Enhancing Methanol Selectivity in the Hydrogenation Reaction of CO2

  • Kubovics, Márta
  • Trigo, Albert
  • Sánchez, Antoni
  • Marbán Calzón, Gregorio
  • Borrás, Alejandro
  • Moral Vico, Javier
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
A novel CuZnO multicomponent catalyst, involving reduced graphene oxide (rGO) as a support, was synthesized to be applied in the catalytic hydrogenation of CO2 to methanol. The CuZnO@rGO composite was prepared as a 3D aerogel by a two-step process involving supercritical CO2 for macrostructuration and H2 treatment for reduction. Electron microscopy was applied to visualize the meso/macroporous morphology formed by the supercritical drying. The elemental mapping depicted a homogenous distribution of CuZnO nanoparticles deposited on the rGO flakes. It was demonstrated that methanol production increases for the CuZnO@rGO composite in comparison to unsupported similar CuZnO nanoparticles. This behavior was ascribed to a different interaction established between the Cu0 and ZnO nanoparticles used as synthetized or deposited on rGO. It is shown that the highly reduced rGO component stimulates H2O desorption produced during the hydrogenation reaction, thus it serves as a support hindering the sintering of Cu0 nanoparticles. The formation of a diluted surface alloy of Zn into Cu0 was determined for the unsupported CuZnO NPs, while for the CuZnO@rGO aerogel composite, the absence of any additional phase, e. g., a surface alloy or reduced ZnO, was confirmed. The composite aerogels show excellent MeOH selectivity at high temperature (up to 260 °C) and low pressure (10 bar)., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) and the Spanish National Plan of Research with project PID2020-115631GB-I00. Catalytic experiments were funded by the Ramón Areces foundation, in the hallmark of the META2NOL project granted in the XIX national contest of life and matter sciences projects. Márta Kubovics acknowledge the financial support from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Cofund grant (agreement no MSCA-COFUND-DP/0320-754397). This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by Márta Kubovics., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boron-Based Functional Additives Enable Solid Electrolyte Interphase Engineering in Calcium Metal Battery

  • Bodin, Charlotte
  • Forero Saboya, Juan
  • Jankowski, Piotr
  • Radan, Kristian
  • Foix, Dominique
  • Courrèges, Cécile
  • Yousef, Ibraheem
  • Dedryvère, Rémi
  • Davoisne, Carine
  • Lozinšek, Matic
  • Ponrouch, Alexandre
Calcium-metal batteries have received growing attention recently after several studies reporting successful metal plating and stripping with organic electrolytes. Given the low redox potential of metallic calcium, its surface is commonly covered by a passivation layer grown by the accumulation of electrolyte decomposition products. The presence of borate species in this layer has been shown to be a key parameter allowing for Ca2+ migration and favoring Ca electrodeposition. Here, boron-based additives are evaluated in order to tune the SEI composition, morphology, and properties. The decomposition of a BF3-based additive is studied at different potentiostatic steps and the resulting SEI layer was thoroughly characterized. SEI growth mechanism is proposed based on both experimental data and DFT calculations pointing at the formation of boron-crosslinked polymeric matrices. Several boron-based adducts are explored as SEI-forming additives for calcium-metal batteries paving the way to very rich chemistry leading to Ca2+ conducting SEI., Funding from the European Union's Horizon 2020 research and innovation program H2020 are acknowledged: European Research Council (ERC-2016-STG, CAMBAT, grant agreement no. 715087 and ERC-2020-STG, HiPeR−F, grant agreement no. 950625) and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement no. 754397). A.P. is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). D.F., C.C. and R.D. thank the French National Research Agency (STORE-EX Labex Project ANR-10-LABX-76-01) for financial support. K.R. and M.L. gratefully acknowledge the research funding by the Slovenian Research Agency (P1-0045, N1-0189). Alistore-European Research Institute is gratefully acknowledged for financial support through the postdoc grant to C.B. The SR-FTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. All DFT calculations were carried out at the Wroclaw Centre for Networking and Supercomputing within grant no. 346., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocatalytic Hydrogen Production using Porous 3D Graphene-Based Aerogels Supporting Pt/TiO2 Nanoparticles

  • Kubovics, Márta
  • Silva, Cláudia G.
  • López Periago, Ana M.
  • Faria, Joaquim L.
  • Domingo Pascual, M. Concepción
Composites involving reduced graphene oxide (rGO) aerogels supporting Pt/TiO2 nanoparticles were fabricated using a one-pot supercritical CO2 gelling and drying method, followed by mild reduction under a N2 atmosphere. Electron microscopy images and N2 adsorption/desorption isotherms indicate the formation of 3D monolithic aerogels with a meso/macroporous morphology. A comprehensive evaluation of the synthesized photocatalyst was carried out with a focus on the target application: the photocatalytic production of H2 from methanol in aqueous media. The reaction conditions (water/methanol ratio, catalyst concentration), together with the aerogel composition (Pt/TiO2/rGO ratio) and architecture (size of the aerogel pieces), were the factors that varied in optimizing the process. These experimental parameters influenced the diffusion of the reactants/products inside the aerogel, the permeability of the porous structure, and the light-harvesting properties, all determined in this study towards maximizing H2 production. Using methanol as the sacrificial agent, the measured H2 production rate for the optimized system (18,800 µmolH2h-1gNPs-1) was remarkably higher than the values found in the literature for similar Pt/TiO2/rGO catalysts and reaction media (2000-10,000 µmolH2h-1gNPs-1)., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019–000917-S) and the Spanish National Plan of Research with project PID2020–115631GB-I00. We would like to thank the scientific collaboration under LA/P/0045/2020 (ALiCE), UIDB/50020/2020, and UIDP/50020/2020 (LSRE-LCM), financed by national funds through FCT/MCTES (PIDDAC). Márta Kubovics acknowledges the financial support from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Cofund grant (agreement no MSCA-COFUND-DP/0320-754397) and the Short Term Scientific Mission (STSM) from the Greenering network by the COST Association. This work has been performed in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by Márta Kubovics., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Battery Energy System Integration in Frequency Control of an Electrical Grid with Wind Power

  • Pokhriyal, Anukriti
  • Domínguez-García, José Luis
  • Gómez-Romero, P.
The rapid increase in the integration of renewable energy sources into the electrical grid is posing new challenges for the dynamic responses due to the global inertia reduction. In this regard, the impact on frequency stability of such reduction and the potential support from wind power have been investigated lately. However, it is well-known that the variability of wind power and its reduced inertia may not be enough to handle the power unbalance. Energy storage systems (e.g., batteries) may provide the required additional flexibility to ensure proper response. In this paper, an analysis of how the different control loops for frequency support on wind power and batteries interact and perform is presented. To gain insights from the different impacts, a sensitivity analysis comparison for frequency regulation through (i) inertia and droop control of a variable speed wind turbine and (ii) battery is performed. The analysis was carried out through simulations using the well-known 4 generator 2-area model adapted to include a wind farm. From a battery perspective, its ramping capabilities were varied to provide frequency regulation. The paper shows how, depending on the control parameters and battery size, the frequency response may even become unstable due to interactions of the various pieces of technology. Thus, it shows that coordinated actions, control optimization and grid status among different actors on the grid (as battery and wind) is required for stable operation., This research was funded by H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supercritical CO2 Synthesis of Porous Metalloporphyrin Frameworks: Application in Photodynamic Therapy

  • Kubovics, Márta
  • Careta, Oriol
  • Vallcorba, Oriol
  • Romo Islas, Guillermo
  • Rodríguez, Laura
  • Ayllón, Jose A.
  • Domingo Pascual, M. Concepción
  • Nogués, Carme
  • López Periago, Ana M.
A series of porous metalloporphyrin frameworks prepared from the 5,10,15,20-tetra(4-pyridyl)porphyrin (H2TPyP) linker and four metal complexes, M(hfac)2 M = Cu(II), Zn(II), Co(II), and Ni(II) (hfac: 1,1,1,5,5,5-hexafluoroacetylacetonate), were obtained using supercritical CO2 (scCO2) as a solvent. All the materials, named generically as [M-TPyP]n, formed porous metal-organic frameworks (MOFs), with surface areas of ∼450 m2 g-1. All MOFs were formed through the coordination of the metal to the exocyclic pyridine moieties in the porphyrin linker. For Cu(II), Zn(II), and Co(II), incomplete metal coordination of the inner pyrrole ring throughout the structure was observed, giving place to MOFs with substitutional defects and leading to a certain level of disorder and limited crystallinity. These samples, prepared using scCO2, were precipitated as nano- to micrometric powders. Separately, a layering technique from a mixture of organic solvents was used to crystallize high-quality crystals of the Co(II) based MOF, obtained with the formula [{Co(hfac)2}2H2TPyP]n. The crystal structure of this MOF was elucidated by single-crystal synchrotron X-ray diffraction. The Zn(II)-based MOF was selected as a potential photodynamic therapy drug in the SKBR-3 tumoral cell line showing outstanding performance. This MOF resulted to be nontoxic, but after 15 min of irradiation at 630 nm, using either 1 or 5 μM concentration of the product, almost 70% of tumor cells died after 72 h., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centres of Excellence (CEX2019-000917-S) and the Spanish National Plan of Research with projects PID2020-115631GB-I00 (C.D., A.M.L.-P., and M.K.), PID2020-116844RB-C21, and 2017SGR503-Generalitat de Catalunya (C.N. and O.C) and PID2019-104121GB-I00 (G. R.-I. and L.R.)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct X-Ray Detection of the Spin Hall Effect in CuBi

  • Ruiz-Gómez, Sandra
  • Guerrero, Rubén
  • Khaliq, Muhammad W.
  • Fernández-González, Claudia
  • Prat, Jordi
  • Valera, Andrés
  • Finizio, Simone
  • Perna, Paolo
  • Camarero, Julio
  • Pérez, Lucas
  • Aballe, Lucía
  • Foerster, Michael
13 pags., 12 figs., 8 apps. -- Subject Areas: Condensed Matter Physics, Spintronics, The spin Hall effect and the inverse spin Hall effect are important spin-charge conversion mechanisms. The direct spin Hall effect induces a surface spin accumulation from a transverse charge current due to spin-orbit coupling even in nonmagnetic conductors. However, most detection schemes involve additional interfaces, leading to large scattering in reported data. Here we perform interface-free x-ray spectroscopy measurements at the Cu L3,2 absorption edges of highly Bi-doped Cu (Cu95Bi5). The detected x-ray magnetic circular dichroism signal corresponds to an induced magnetic moment of (2.2±0.5)×10-12 μB A-1 cm2 per Cu atom averaged over the probing depth, which is of the same order of magnitude as found for Pt measured by magneto-optics. The results highlight the importance of interface-free measurements to assess material parameters and the potential of CuBi for spin-charge conversion applications., This work has been partially funded by MCIN/AEI/10.13039/501100011033 through Projects No. FIS2016-78591-C3-1-R, No. MAT2017-87072-C4-2-P, No. RTI2018-097895-BC42, No. RTI2018-095303-B-C53, and No. PID2020–117024GB-C43 and by the Comunidad de Madrid through Project No. NANOMAGCOST-CM P2018/NMT-4321. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (Grants No. SEV-2016-0686 and No. CEX2020-001039-S). The work has been supported by the ALBA inhouse research program. We thank the Spanish National Center of Electron Microscopy for Scanning Electron Microscopy measurements. M. W. K. acknowledges funding from Horizon 2020 Marie Skłodowska-Curie COFUND DOC-FAM, with Grant agreement No. 754397., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured Thick Electrode Strategies toward Enhanced Electrode–Electrolyte Interfaces

  • Pokhriyal, Anukriti
  • González-Gil, Rosa M.
  • Bengoa, Leandro N.
  • Gómez-Romero, P.
This article addresses the issue of bulk electrode design and the factors limiting the performance of thick electrodes. Indeed, one of the challenges for achieving improved performance in electrochemical energy storage devices (batteries or supercapacitors) is the maximization of the ratio between active and non-active components while maintaining ionic and electronic conductivity of the assembly. In this study, we developed and compared supercapacitor thick electrodes using commercially available carbons and utilising conventional, easily scalable methods such as spray coating and freeze-casting. We also compared different binders and conductive carbons to develop thick electrodes and analysed factors that determine the performance of such thick electrodes, such as porosity and tortuosity. The spray-coated electrodes showed high areal capacitances of 1428 mF cm−2 at 0.3 mm thickness and 2459 F cm−2 at 0.6 mm thickness., This research was funded by the Spanish MICINN, the State Research Agency (AEI) and the European Regional Development Fund (FEDER) (Project Nanopeistorage PID2021-128390OB-I00), and by H2020-MSCA-COFUND-2016, DOC-FAM, Grant Agreement No. 754397. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme (Grant SEV-2017-0706 and CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), This work has been carried out within the framework of the doctoral program (PhD) of Material Science of Universitat Autònoma de Barcelona (UAB). L.N.B. acknowledges funding from Horizon-TMA-MSCA-PF-EF (ref 101062498)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ratiometric Nanothermometer Based on a Radical Excimer for In Vivo Sensing

  • Blasi, Davide
  • Gonzalez Pato, Nerea 
  • Rodríguez Rodríguez, Xavier
  • Díez Zabala, Íñigo
  • Srinivasan, Sumithra Y.
  • Camarero, Núria
  • Esquivias, Oriol
  • Roldán, Mònica
  • Guasch, Judit
  • Laromaine, Anna
  • Gorostiza, Pau
  • Veciana, Jaume
  • Ratera, Immaculada
Ratiometric fluorescent nanothermometers with near-infrared emission play an important role in in vivo sensing since they can be used as intracellular thermal sensing probes with high spatial resolution and high sensitivity, to investigate cellular functions of interest in diagnosis and therapy, where current approaches are not effective. Herein, the temperature-dependent fluorescence of organic nanoparticles is designed, synthesized, and studied based on the dual emission, generated by monomer and excimer species, of the tris(2,4,6-trichlorophenyl)methyl radical (TTM) doping organic nanoparticles (TTMd-ONPs), made of optically neutral tris(2,4,6-trichlorophenyl)methane (TTM-αH), acting as a matrix. The excimer emission intensity of TTMd-ONPs decreases with increasing temperatures whereas the monomer emission is almost independent and can be used as an internal reference. TTMd-ONPs show a great temperature sensitivity (3.4% K-1 at 328 K) and a wide temperature response at ambient conditions with excellent reversibility and high colloidal stability. In addition, TTMd-ONPs are not cytotoxic and their ratiometric outputs are unaffected by changes in the environment. Individual TTMd-ONPs are able to sense temperature changes at the nano-microscale. In vivo thermometry experiments in Caenorhabditis elegans (C. elegans) worms show that TTMd-ONPs can locally monitor internal body temperature changes with spatio-temporal resolution and high sensitivity, offering multiple applications in the biological nanothermometry field., D.B. and N.G.-P. contributed equally to this work. The authors are grateful for the financial support received from the Spanish Government (PID2020-115296RA-I00, PID2019-105622RB-I00, PDI2021-122645OB-I00, RTI2018-096273-B-I00 and PID2019-111493RB-I00) funded by MICIN and the “Ramón y Cajal” program (RYC-2017-22614), the Generalitat de Catalunya (SGR-918, 2017SGR765, SGR Cat 2021-00438, 2017-SGR-1442, and 2021-SGR-1410, 2021-SGR-00446), and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN). DB gratefully acknoledges the REFIN (Return for Future Innovation) action for funding, an ininitiative co - funded by European Union through the POR Puglia 2014 - 2020 (ID grant: 2455F798). This research was also supported by the European Union's Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397), Human Brain Project WaveScaES (SGA2-785907 and SGA3-945539), DEEPER (ICT36-2020-101016787), and the Marie Skłodowka-Curie grant agreement Nr. 101007804 (Micro4Nano). Support from Fundaluce and CaixaHealth (ID 100010434) are also acknowledged. The work was supported as well by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany). ICMAB-CSIC acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S). IBEC acknowledges support from the CERCA programme of AGAUR/Generalitat de Catalunya and the Severo Ochoa Programme. This work had been developed inside the “Biochemistry, Molecular Biology and Biomedicine” and “Materials Science” Ph.D. programs of UAB. Nerea Gonzalez-Pato acknowledges the financial support from the FPU fellowship (FPU17/02551) from the Spanish Ministry., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel calcium fluorinated alkoxyaluminate salt as a next step towards Ca metal anode rechargeable batteries

  • Pavčnik, Tjaša
  • Forero Saboya, Juan
  • Ponrouch, Alexandre
  • Robba, Ana
  • Dominko, Robert
  • Bitenc, Jan
Ca metal anode rechargeable batteries are seen as a sustainable high-energy density and high-voltage alternative to the current Li-ion battery technology due to the low redox potential of Ca metal and abundance of Ca. Electrolytes are key enablers on the path towards next-generation battery systems. Within this work, we synthesize a new calcium tetrakis(hexafluoroisopropyloxy) aluminate salt, Ca[Al(hfip)4]2, and benchmark it versus the state-of-the-art boron analogue Ca[B(hfip)4]2. The newly developed aluminate-based electrolyte exhibits improved performance in terms of conductivity, Ca plating/stripping efficiency, and oxidative stability as well as Ca battery cell performance. A marked improvement of 0.5 V higher oxidative stability can pave the path towards high-voltage Ca batteries. A critical issue of solvent quality during salt synthesis is identified as well as solvent decomposition at the Ca metal/electrolyte interface, which leads to passivation of the Ca metal anode. However, the new aluminate salt with preferable electrochemical properties over the existing boron analogue opens up a new area for future Ca battery research based on aluminium compounds., T. P., J. B. and R. D. would like to acknowledge support from Slovenian Research Agency through research programmes P2-0423, P2-0393 and research projects J2-4462, N2-0279. A. R. acknowledges funding from the same agency for research programme P1-0153. A. P. and J. F. S. acknowledge the funding from the European Union's Horizon 2020 research and innovation program (Grant No. 715087), and the H2020 Marie Skłodowska-Curie Action COFUND-2016 DOC-FAM (Grant No. 754397). A. P. is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conductive Bacterial Nanocellulose-Polypyrrole Patches Promote Cardiomyocyte Differentiation

  • Srinivasan, Sumithra Y.
  • Cler, Marina
  • Zapata Arteaga, Osnat
  • Dörling, Bernhard
  • Campoy Quiles, Mariano
  • Martínez Fernández, Elena
  • Engel, Elisabeth
  • Pérez Amodio, Soledad
  • Laromaine, Anna
The low endogenous regenerative capacity of the heart, added to the prevalence of cardiovascular diseases, triggered the advent of cardiac tissue engineering in the last decades. The myocardial niche plays a critical role in directing the function and fate of cardiomyocytes; therefore, engineering a biomimetic scaffold holds excellent promise. We produced an electroconductive cardiac patch of bacterial nanocellulose (BC) with polypyrrole nanoparticles (Ppy NPs) to mimic the natural myocardial microenvironment. BC offers a 3D interconnected fiber structure with high flexibility, which is ideal for hosting Ppy nanoparticles. BC-Ppy composites were produced by decorating the network of BC fibers (65 ± 12 nm) with conductive Ppy nanoparticles (83 ± 8 nm). Ppy NPs effectively augment the conductivity, surface roughness, and thickness of BC composites despite reducing scaffolds' transparency. BC-Ppy composites were flexible (up to 10 mM Ppy), maintained their intricate 3D extracellular matrix-like mesh structure in all Ppy concentrations tested, and displayed electrical conductivities in the range of native cardiac tissue. Furthermore, these materials exhibit tensile strength, surface roughness, and wettability values appropriate for their final use as cardiac patches. In vitro experiments with cardiac fibroblasts and H9c2 cells confirmed the exceptional biocompatibility of BC-Ppy composites. BC-Ppy scaffolds improved cell viability and attachment, promoting a desirable cardiomyoblast morphology. Biochemical analyses revealed that H9c2 cells showed different cardiomyocyte phenotypes and distinct levels of maturity depending on the amount of Ppy in the substrate used. Specifically, the employment of BC-Ppy composites drives partial H9c2 differentiation toward a cardiomyocyte-like phenotype. The scaffolds increase the expression of functional cardiac markers in H9c2 cells, indicative of a higher differentiation efficiency, which is not observed with plain BC. Our results highlight the remarkable potential use of BC-Ppy scaffolds as a cardiac patch in tissue regenerative therapies., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the National Research Agency (AEI) and European Regional Development Funds (ERDF/FEDER), project BIOCARDIO ref RTI2018-096320–B-C21, project BIOSOFT-REGE ref PID2021-122645OB-I00, the CERCA Program/Generalitat de Catalunya, the ‘Severo Ochoa’ Programme for Center of Excellence in R&D (CEX2019-000917), the Programme/Generalitat de Catalunya (2017-SGR-359), the Severo Ochoa Programme of the Spanish Ministry of Science and Innovation (MICINN─Grant SEV-2014–0425, 2015–2019 and CEX2018–000,789-S, 2019–2023), and the projects FIP-PALOMA, FIP-BEAT, and the PDC2022-133755-I00/AEI/10.13039/501100011033 European Union NextGeneration EU/PRTR. This research was also supported by the European Union’s Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397). This project also received the support of a La Caixa INPhINIT Fellowship (ID 100010434) with project code LCF/BQ/DR19/11740025. S.Y.S. is enrolled in the Materials Science Ph.D. program of the UAB. S.Y.S. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), in the Aerogels COST ACTION (CA 18125), and in CSIC-Conexión Nanomedicine, EPNOE network, and Red Nanocare 2.0. The authors acknowledge the use of Biorender.com., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single stop analysis of a protein surface using molecular probe electrochemistry

  • Xavier, Jewel Ann Maria
  • Fuentes Sempere, Isabel
  • Nuez Martínez, Miquel
  • Viñas, Clara
  • Teixidor, Francesc
Visualization of a protein in its native form and environment without any interference has always been a challenging task. Contrary to the assumption that protein surfaces are smooth, they are in fact highly irregular with undulating surfaces. Hence, in this study, we have tackled this ambiguous nature of the 'surface' of a protein by considering the 'effective' protein surface (EPS) with respect to its interaction with the geometrically well-defined and structurally inert anionic molecule [3,3'-Co(1,2-C2B9H11)2]-, abbreviated as [o-COSAN]-, whose stability, propensity for amine residues, and self-assembling abilities are well reported. This study demonstrates the intricacies of protein surfaces exploiting simple electrochemical measurements using a 'small molecule' redox-active probe. This technique offers the advantage of not utilizing any harsh experimental conditions that could alter the native structure of the protein and hence the protein integrity is retained. Identification of the amino acid residues which are most involved in the interactions with [3,3'-Co(1,2-C2B9H11)2]- and how a protein's environment affects these interactions can help in gaining insights into how to modify proteins to optimize their interactions particularly in the fields of drug design and biotechnology. In this research, we have demonstrated that [3,3'-Co(1,2-C2B9H11)2]- anionic small molecules are excellent candidates for studying and visualizing protein surfaces in their natural environment and allow proteins to be classified according to the surface composition, which imparts their properties. [3,3'-Co(1,2-C2B9H11)2]- 'viewed' each protein surface differently and hence has the potential to act as a simple and easy to handle cantilever for measuring and picturing protein surfaces., This work received funding from the Spanish Ministry of Science, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S) as well as the Spanish Ministerio de Ciencia e Innovación (PID2019-106832RB-I00) and Generalitat de Catalunya (2017SGR1720). J. A. M. Xavier acknowledges the DOC-FAM programme under the Marie Sklodowska-Curie grant agreement No. 754397 and is enrolled in the PhD programme in UAB., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrothermal Fabrication of Carbon-Supported Oxide-Derived Copper Heterostructures: A Robust Catalyst System for Enhanced Electro-Reduction of CO2 to C2 H4

  • Tandava, Venkata S. R. K.
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Murcia-López, Sebastián
  • Morante, Joan Ramón
Anthropogenic CO2 can be converted to alternative fuels and value-added products by electrocatalytic routes. Copper-based catalysts are found to be the star materials for obtaining longer-chain carbon compounds beyond 2e- products. Herein, we report a facile hydrothermal fabrication of a highly robust electrocatalyst: in-situ grown heterostructures of plate-like CuO-Cu2 O on carbon black. Simultaneous synthesis of copper-carbon catalysts with varied amounts of copper was conducted to determine the optimum blend. It is observed that the optimum ratio and structure have aided in achieving the state of art faradaic efficiency for ethylene >45 % at -1.6 V vs. RHE at industrially relevant high current densities over 160 to 200 mA ⋅ cm-2 . It is understood that the in-situ modification of CuO to Cu2 O during the electrolysis is the driving force for the highly selective conversion of CO2 to ethylene through the *CO intermediates at the onset potentials followed by C-C coupling. The excellent distribution of Cu-based platelets on the carbon structure enables rapid electron transfer and enhanced catalytic efficiency. It is inferred that choosing the right composition of the catalyst by tuning the catalyst layer over the gas diffusion electrode can substantially affect the product selectivity and promote reaching the potential industrial scale., .S.R.K.T. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 754397. IREC and ICN2 acknowledge Generalitat de Catalunya for financial support through the CERCA Program. The authors thank the support from NANOGEN (PID2020-116093RB-C43) and CERES projects (PID2020-116093RB-C42), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. This study was also supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Arrhythmic Effects Evaluated on Caenorhabditis elegans: The Case of Polypyrrole Nanoparticles

  • Srinivasan, Sumithra Y.
  • Alvarez-Illera, Pilar
  • Kukhtar, Dmytro
  • Benseny-Cases, Núria
  • Cerón, Julián
  • Álvarez. Javier
  • Fonteriz, Rosalba I.
  • Montero, Mayte
  • Laromaine, Anna
Experimental studies and clinical trials of nanoparticles for treating diseases are increasing continuously. However, the reach to the market does not correlate with these efforts due to the enormous cost, several years of development, and off-target effects like cardiotoxicity. Multicellular organisms such as the Caenorhabditis elegans (C. elegans) can bridge the gap between in vitro and vertebrate testing as they can provide extensive information on systemic toxicity and specific harmful effects through facile experimentation following 3R EU directives on animal use. Since the nematodes’ pharynx shares similarities with the human heart, we assessed the general and pharyngeal effects of drugs and polypyrrole nanoparticles (Ppy NPs) using C. elegans. The evaluation of FDA-approved drugs, such as Propranolol and Racepinephrine reproduced the arrhythmic behavior reported in humans and supported the use of this small animal model. Consequently, Ppy NPs were evaluated due to their research interest in cardiac arrhythmia treatments. The NPs’ biocompatibility was confirmed by assessing survival, growth and development, reproduction, and transgenerational toxicity in C. elegans. Interestingly, the NPs increased the pharyngeal pumping rate of C. elegans in two slow-pumping mutant strains, JD21 and DA464. Moreover, the NPs increased the pumping rate over time, which sustained up to a day post-excretion. By measuring pharyngeal calcium levels, we found that the impact of Ppy NPs on the pumping rate could be mediated through calcium signaling. Thus, evaluating arrhythmic effects in C. elegans offers a simple system to test drugs and nanoparticles, as elucidated through Ppy NPs., This work was supported by the Ministry of Science and Innovation (MICINN) “Severo Ochoa” program for centers of excellence through the BEAT project (FUNFUTURE-FIP-2020), MICINN project PID2021-122239OB-I00 and partly supported by the European Union’s Horizon Europe research and innovation program under grant agreement No 101057527 (NextGEM). Funded by the European Union. Some experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. SYS is enrolled in the Materials Science Ph.D. program of Universitat Autonoma de Barcelona (UAB). SYS acknowledges financial support from DOC-FAM, European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 754397. AL and SYS participate in the networks of EPNOE, Red Nanocare2.0 , and the CSIC Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy, SUSPLAST. The authors acknowledge the use of Biorender.com, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-dimensional cell culture of chimeric antigen receptor T cells originated from peripheral blood mononuclear cells towards cellular therapies

  • Pérez del Río, Eduardo
  • Román Alonso, Macarena
  • Rius, Irene
  • Santos, Fabiao
  • Castellote Borrell, Miquel
  • Veciana, Jaume
  • Ratera, Immaculada
  • Arribas, Joaquín
  • Guasch, Judit
Background aims: With the objective of improving the ex vivo production of therapeutic chimeric antigen receptor (CAR) T cells, we explored the addition of three-dimensional (3D) polystyrene scaffolds to standard suspension cell cultures.Methods: We aimed to mimic the structural support given by the lymph nodes during in vivo lymphocyte expansion.Results: We observed an increase in cell proliferation compared with standard suspension systems as well as an enhanced cytotoxicity toward cancer cells. Moreover, we directly obtained the CART cells from peripheral blood mononuclear cells, thus minimizing the ex vivo manipulation of the therapeutic cells and opening the way to synergies among different cell populations.Conclusions: We propose the use of commercially available 3D polystyrene systems to improve the current immune cell cultures and resulting cell products for emerging cellular (immuno)therapies.(c) 2023 International Society for Cell & Gene Therapy., This research was funded by Instituto de Salud Carlos III through Consorcio Centro de Investigación Biomédica en Red (CIBER) with the projects “Alycia” (Nr. BBN18PI01) and “Gels4ACT” (Nr. BBN20PIV02). The authors are also grateful for the financial support received from the Spanish Ministry of Science and Innovation (PID2020-115296RA-I00, PID2019-105622RBI00 and the “Ramón y Cajal” program [RYC-2017-22614]). The work was supported as well by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany). This research was also supported by the European Union's Horizon 2020 research and innovation programme H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397). The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

How to verify the precision of density-functional-theory implementations via reproducible and universal workflows

  • Bosoni, Emanuele
  • Beal, Louis
  • Bercx, Marnik
  • Blaha, Peter
  • Blügel, Stefan
  • Bröder, Jens
  • Callsen, Martin
  • Cottenier, Stefaan
  • Degomme, Augustin
  • Dikan, Vladimir
  • Eimre, Kristjan
  • Flage-Larsen, Espen
  • Fornari, Marco
  • García Arribas, Alberto
  • Genovese, Luigi
  • Giantomassi, Matteo
  • Huber, Sebastiaan P.
  • Janssen, Henning
  • Kastlunger, Georg
  • Krack, Matthias
  • Kresse, Georg
  • Kühne, Thomas D.
  • Lejaeghere, Kurt
  • Madsen, Georg K.H.
  • Marsman, Martijn
  • Marzari, Nicola
  • Michalicek, Gregor
  • Mirhosseini, Hossein
  • Müller, Tiziano M.A.
  • Petretto, Guido
  • Pickard, Chris J.
  • Poncé, Samuel
  • Rignanese, Gian Marco
  • Rubel, Oleg
  • Ruh, Thomas
  • Sluydts, Michael
  • Vanpoucke, Danny E.P.
  • Vijay, Sudarshan
  • Wolloch, Michael
  • Wortmann, Daniel
  • Yakutovich, Aliaksandr V.
  • Yu, Jusong
  • Zadoks, Austin
  • Zhu, Bonan
  • Pizzi, Giovanni
Density-functional theory methods and codes adopting periodic boundary conditions are extensively used in condensed matter physics and materials science research. In 2016, their precision (how well properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a first crucial step to evaluate the reliability of such computations. In this Expert Recommendation, we discuss recommendations for verification studies aiming at further testing precision and transferability of density-functional-theory computational approaches and codes. We illustrate such recommendations using a greatly expanded protocol covering the whole periodic table from Z = 1 to 96 and characterizing 10 prototypical cubic compounds for each element: four unaries and six oxides, spanning a wide range of coordination numbers and oxidation states. The primary outcome is a reference dataset of 960 equations of state cross-checked between two all-electron codes, then used to verify and improve nine pseudopotential-based approaches. Finally, we discuss the extent to which the current results for total energies can be reused for different goals., This work was inspired and is supported in part by the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 676598 and grant agreement No. 824143 (European MaX Centre of Excellence “Materials design at the Exascale”) and by NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). For the purpose of Open Access, a CC BY public copyright licence is applied to any Author Accepted Manuscript (AAM) version arising from this submission. We acknowledge Flaviano José dos Santos for useful discussions on the analysis of the smearing types and k-point convergence, and Xavier Gonze, Marc Torrent, and François Jollet for useful discussions on PAW pseudopotentials. M.F. and N.M. acknowledge the contribution of Sadasivan Shankar in early discussions about the use of 6 prototype oxides as general platform to explore the transferability of pseudopotentials. Work at ICMAB (E.B., A.G., V.D.) is supported by the Severo Ochoa Centers of Excellence Program (MCIN CEX2019- 000917-S), by grant PGC2018-096955-B-C44 of MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe”, and by GenCat 2017SGR1506. We also thank the Barcelona Supercomputer Center for computational resources. V.D. acknowledges support from DOC-FAM, European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 754397. O.R. acknowledges travel support from WIEN2k (Technical University of Vienna). The Jülich team (S.B., J.B., H.J., G.M., D.W) acknowledges support by the Joint Lab Virtual Materials Design (JL-VMD) of the Forschungszentrum Jülich, the Helmholtz Platform for Research Software Engineering - Preparatory Study (HIRSE_PS), the Joint Virtual Laboratory AI, Data Analytics and Scalable Simulation (AIDAS) of the Forschungszentrum Jülich and the French Alternative Energies and Atomic Energy Commission, and we gratefully acknowledge the computing time granted through JARA on the supercomputers JURECA83 at Forschungszentrum Jülich and CLAIX at RWTH Aachen University. H.M and T.D.K (University of Paderborn) gratefully acknowledge the Gauss Centre for Supercomputing e.V. (www.gausscentre. eu) for funding this project by providing computing time on the GCS Supercomputer JUWELS at Jülich Supercomputing Centre (JSC). S.P. and G.-M.R. (Université catholique de Louvain) acknowledge support from the F.R.S.-FNRS. Computational resources have been provided by the PRACE-21 resources MareNostrum at BSC-CNS and by the Consortium des Équipements de Calcul Intensif (CÉCI), funded by the Fonds de la Recherche Scientifique de Belgique (F.R.S.-FNRS) under Grant No. 2.5020.11 and by the Walloon Region as well as computational resources awarded on the Belgian share of the EuroHPC LUMI supercomputer. G.Ka. and S.V. received funding from the VILLUM Centre for the Science of Sustainable Fuels and Chemicals (9455) from VILLUM FONDEN. Computational resources were provided by the Niflheim supercomputing cluster at the Technical University of Denmark (DTU). They also thank Jens Jørgen Mortensen and Ask H. Larsen for the valuable discussions on optimizing the workflow for the GPAW code. S.C. acknowledges financial support from OCAS NV by an OCAS-endowed chair at Ghent University. The computational resources and services used at Ghent University were provided the VSC (Flemish Supercomputer Center), funded by the Research Foundation Flanders (FWO) and the Flemish Government – department EWI. Accepted Manuscript by Nature Review Physics Version of Record at https://doi.org/10.1038/s42254-023-00655-3 19/94 M.W. gratefully acknowledges computational resources provided by the Vienna Scientific Cluster (VSC). This research was funded in part by the Austrian Science Fund (FWF) [P 32711]. E.F.L. would like to acknowledge resources provided by Sigma2 - the National Infrastructure for High Performance Computing and Data Storage in Norway and support from the Norwegian Research Infrastructure Services (NRIS). B.Z. is grateful to the UK Materials and Molecular Modelling Hub for computational resources, which is partially funded by EPSRC (EP/P020194/1 and EP/T022213/1) and acknowledge the use of the UCL Myriad and Kathleen High Performance Computing Facility (Myriad@UCL, Kathleen@UCL), and associated support services, in the completion of this work. N.M., G.Pi., and A.G. acknowledge support from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 957189 (BIG-MAP), also part of the BATTERY 2030+ initiative under grant agreement No. 957213. G.P., J.Y. and G.-M.R. acknowledge support by the Swiss National Science Foundation (SNSF) and by the Fonds de la Recherche Scientifique de Belgique (F.R.S.-FNRS) through the “FISH4DIET” Project (SNSF grant 200021E_206190 and F.R.S.-FNRS grant T.0179.22). G.P. acknowledges support by the Open Research Data Program of the ETH Board, under the Establish project “PREMISE”. J.Y. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 760173 (MARKETPLACE)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqua-tri-fluorido-boron-1,3-dioxolan-2-one (1/2)

  • Radan, Kristian
  • Forero Saboya, Juan
  • Ponrouch, Alexandre
  • Lozinšek, Matic
The crystal structure of the co-crystal of aqua-tri-fluorido-boron with two ethyl-ene carbonate (systematic name: 1,3-dioxolan-2-one) mol-ecules, BF3H2O·2OC(OCH2)2, was determined by low-temperature single-crystal X-ray diffraction. The co-crystal crystallizes in the ortho-rhom-bic space group P212121 with four formula units per unit cell. The asymmetric unit consists of an aqua-tri-fluorido-boron mol-ecule and two ethyl-ene carbonate mol-ecules, connected by O-H⋯O=C hydrogen bonds. This crystal structure is an inter-esting example of a superacidic BF3H2O species co-crystallized with an organic carbonate., Funding for this research was provided by: European Research Council (ERC) (StG HiPeR-F and StG CAMBAT) (grant agreement Nos. 950625 and 715087); Marie Skłodowska-Curie Actions (COFUND-2016 DOC-FAM) under the European Union’s Horizon 2020 research and innovation programme (grant No. 754397); Jozˇef Stefan Institute Director’s Fund; Slovenian Research Agency (grant No. N1-0189); Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (contract No. CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

To flow or not to flow. A perspective on large-scale stationary electrochemical energy storage

  • Pokhriyal, Anukriti
  • Rueda-García, Daniel
  • Gómez-Romero, P.
This article is part of the themed collection: Recent Open Access Articles., Energy storage is experiencing a renaissance as a result of the growing number of vital applications such as internet of things, smart grids, electric vehicles, renewable energy storage, etc. In particular, stationary energy storage must be urgently deployed at a large-scale to support full deployment of renewables and a sustainable grid. Electrochemical energy storage systems (EESS) will be key in this pursuit. Yet, present mature technologies are all sub-optimal. A myriad of new battery chemistries are being developed in research labs, each with specific strengths and drawbacks. EESS technologies such as lithium-ion batteries, lithium–sulfur, metal–air and other post-lithium technologies, but also supercapacitors, hybrid devices and redox flow batteries (RFBs), could benefit from collaborative development between top-down systems engineering and bottom-up material science. Lithium and post-lithium systems have been extensively researched and reviewed. This perspective article examines the energy storage landscape that goes from state-of-the-art flow cells to novel flowing and stationary technologies. While there is a wide scope for improvement of first generation RFBs, a wealth of novel concepts such as ambipolar electrolytes or shuttle cells to semisolid electrodes are also emerging. This could boost the energy density of these flowing systems. In our analysis we also propose other new concepts which could eventually lead to non-flowing large-scale electrochemical energy storage., A. P. acknowledges her fellowship funded by H2020-MSCA-COFUND-2016, DOC-FAM (75439). The authors acknowledge funding from AEI (projects PID2021-128390OB-I00, TED2021-130205B-C21 and PLEC2022-009328). ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N-Doped Octagon-Containing HBC as Redox and pH Chiroptical Switch in the NIR

  • Medel, Miguel A.
  • Hortigüela, Lidia
  • Lloveras, Vega
  • Catalán Toledo, José I.
  • Miguel, Delia
  • Mota, Antonio J.
  • Crivillers, Núria
  • Campaña, Araceli G.
  • Morcillo, Sara P.
The optical and chiroptical properties of an aza-HBC-oct-[5]helicene have been studied and also modulated by means of protonation or oxidation. In both cases, the generated species shows a new absorption band in the NIR region that is not present in the neutral species. This result enables this N-doped nanographene to act both as optical and, remarkably, as chiroptical switch since both the CD and CPL can be modulated by external stimuli such as redox or pH changes., We acknowledge funding from FEDER(EDRF)/Junta de Andalucía-Consejería de Transformación Económica, Industria, Conocimiento y Universidades (B-FQM-428-UGR20), Plan Andaluz de Investigación, Desarrollo e Innovación2021 (P21-00133), Ministerio de Ciencia e Innovación (GENESIS PID2019-111682RB−I00, the PID2019-105622RB−I00), Generalitat de Catalunya (2021-SGR-00443) and the “Severo Ochoa” Programme for Centers of Excellence in R&D FUNFUTURE CEX2019-000917-S. L. H. thanks the Junta de Andalucía for a FPDI contract 2021 (PREDOC_00408). J. C.-T. thanks DOC-FAM fellowship (grant agreement Nr. 754397 through H2020-MSCA-COFUND-2016). J. C−T. is enrolled in the Materials Science PhD program of UAB. Authors thank the Centro de Servicios de Informática y Redes de Comunicación (CSIRC), UGR, for providing the computing time., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox-Active Au Nanoparticles Self-Assembled at Liquid-Liquid Interface via C-Au Functionalization for Dye Degradation Electrocatalysis

  • Catalán Toledo, José
  • Djafari, Jamila
  • Mas Torrent, Marta
  • Crivillers, Núria
This work presents the synthesis of poly(vinylpyrrolidone)-stabilized gold nanoparticles (Au NPs) and their subsequent functionalization with molecules bearing terminal alkynes. The ligand exchange occurs at the liquid-liquid interface (LLI), resulting in the formation of Au NPs stabilized through the covalent C-Au functionalization. Simultaneously, structured composite films are formed, driven by the self-assembly of the Au NPs supported by the polymer. A comparative analysis involving three distinct alkyne-terminated derivatives reveals that film formation is favored when the ligand includes an aromatic unit such as in a ferrocenyl-stilbene derivative. The LLI films can be easily transferred to solid a support for their characterization. Additionally, it is demonstrated that these films serve as a potential electrocatalytic platform. As a proof of concept, we demonstrate that the electrochemically active ferrocene-based Au NPs films can efficiently remove methylene blue via an electro-Fenton-like reaction, surpassing the efficiency of the non-redox phenylacetylene Au NP films., The authors thank Dr. J. A. De Sousa for his help with the technical aspects of the synthesis. Dr. T. Jawhari for the Raman spectroscopy measurements (CCiT-UB), Prof. Dr. I. Moreno-Villoslada for discussing the results, and Dr. F. Minges for providing the academic license of the Spectragryph software for spectroscopy data processing and the electron microscopy service at the ICMAB-CSIC and ICN2. This work was funded by the Spanish Ministry (MCIN/AEI/10.13039/501100011033/ERDF, UE) with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I0, the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE CEX2019-000917-S), the ERASAM project (TED2021-132550B–C22) and the Generalitat de Catalunya (2021-SGR-00443). This research is part of the CSIC program within the Interdisciplinary Thematic Platform on Quantum Technologies (PTI QTEP+) for the Spanish Recovery, Transformation, and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. J.C.-T. thanks the DOC-FAM Fellowship, grant agreement no. 754397 through H2020-MSCA-COFUND-2016. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). J.C.-T. is enrolled in the UAB Materials Science Ph.D. program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methylxanthines for halogen bonded cocrystals with 1,4-diiodotetrafluorobenzene: green synthesis, structure, photophysics and DFT studies

  • Benito, Mónica
  • Núñez Aguilera, Rosario
  • Sinha, Sohini
  • Roscini, Claudio
  • Hidalgo-Rosa, Yoan
  • Schott, Eduardo
  • Zarate, Ximena
  • Molins, Elies
Four new halogen-bonded cocrystals of biological methylxanthines, named caffeine, theophylline and theobromine, have been prepared with 1,4-diiodotetrafluorobenzene as a halogen bond donor by mechanochemical and solution processes. For theophylline, N⋯I and N⋯O interactions were observed, while for caffeine and theobromine, only N⋯I was detected. The solids were characterized by PXRD, SC-XRD, FTIR and thermal methods (TGA-DSC analyses). In addition, the solid-state photoluminescence properties of the methylxanthines and their respective cocrystals have been studied and quantum chemistry calculations have been performed to rationalise and understand the electronic and optical properties of all compounds. This work provides a triad of natural methylxanthines capable of forming halogen-bonded multicomponent systems that can give rise to a cocrystal-to-crystal transformation with off-on luminescence activation., This work was financially supported by MCIU (PID2021-1245720B-C32 and PID2022-136892NB-I00), MICINN (PID2019-106832RB-I00/AEI/10.13039/501100011033). M. B., R. N., S. S. and E. M. acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence (CEX2019-00917-S project, CEX2023-001263-S). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. R. N. and S. S. thank Generalitat de Catalunya (AGAUR 2021-SGR-00442 project). This work was supported by grant TED2021-131709B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. We are also thankful for the financial support from ANID/Chile under Projects ANID Postdoctoral 3230141, FONDECYT 1201880, FONDECYT 1231194, ANID/FONDAP/1523A0006; Millennium Science Initiative Program – NCN2021_090, and the Anillos de Ciencia y Tecnología ACT210057. S. S. acknowledges financial support from DOC-FAM, European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 754397. The authors thank the X-ray diffraction, thermal analysis and spectroscopic services from the ICMAB., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Migration of human T cells can be differentially directed by electric fields depending on the extracellular microenvironment

  • Ende, Karen
  • Santos, Fabião
  • Guasch, Judit
  • Kemkemer, Ralf
T cell migration plays an essential role in the immune response and T cell-based therapies. It can be modulated by chemical and physical cues such as electric fields (EFs). The mechanisms underlying electrotaxis (cell migration manipulated by EFs) are not fully understood and systematic studies with immune cells are rare. In this in vitro study, we show that direct current EFs with strengths of physiologically occurring EFs (25-200 mV/mm) can guide the migration of primary human CD4+ and CD8+ T cells on 2D substrates toward the anode and in a 3D environment differentially (CD4+ T cells show cathodal and CD8+ T cells show anodal electrotaxis). Overall, we find that EFs present a potent stimulus to direct T cell migration in different microenvironments in a cell-type-, substrate-, and voltage-dependent manner, while not significantly influencing T cell differentiation or viability., We thank Prof. Dr. Katja Schenke-Layland (Eberhard Karls University Tübingen) for her support and the helpful discussion of the results. We also thank Dr. Imma Ratera (ICMAB-CSIC) for her support with the supervision of F.S. thesis. We are grateful to the FACS Core Facility Berg of the University Clinic Tübingen, for technical support and the use of the shared flow cytometry instrument FACS Canto II (BD Biosciences) for flow cytometry sample acquisition. We acknowledge the Institute for Clinical Transfusion Medicine in Tübingen (Project No.: 201809-2009-01 and ZKT-FoPro202105-2212-01) for providing us with human buffy coats and the Ethics Committee of the University Clinic Tübingen for the ethical approval of our study (Project No.: 581/2018BO2). R.K. and K.E. are grateful for support by Reutlingen University. R.K., J.G., and K.E. acknowledge support by the Max Planck Society. In particular, J.G. is grateful to the Max Planck Institute for Medical Research (Heidelberg, Germany) for their collaboration through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy.” J.G. also acknowledges support from CIBER-BBN and the Spanish Ministry of Science and Innovation through the “Ramón y Cajal” Program ( RYC-2017-22614 ), the project PID2020-115296RA-I00 , and the “Severo Ochoa” Program for Centers of Excellence in R&D ( CEX2019-000917-S ). This work was also funded by the European Union’s Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397 )., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D Printing as a Strategy to Scale-Up Biohybrid Hydrogels for T Cell Manufacture

  • Pérez Del Río, Eduardo
  • Rey Vinolas, Sergi
  • Santos, Fabião
  • Castellote Borrell, Miquel
  • Merlina, Francesca
  • Veciana, Jaume
  • Ratera, Immaculada
  • Mateos Timoneda, Miguel A.
  • Engel, Elisabeth
  • Guasch, Judith
The emergence of cellular immunotherapy treatments is introducing more efficient strategies to combat cancer as well as autoimmune and infectious diseases. However, the cellular manufacturing procedures associated with these therapies remain costly and time-consuming, thus limiting their applicability. Recently, lymph-node-inspired PEG-heparin hydrogels have been demonstrated to improve primary human T cell culture at the laboratory scale. To go one step further in their clinical applicability, we assessed their scalability, which was successfully achieved by 3D printing. Thus, we were able to improve primary human T cell infiltration in the biohybrid PEG-heparin hydrogels, as well as increase nutrient, waste, and gas transport, resulting in higher primary human T cell proliferation rates while maintaining the phenotype. Thus, we moved one step further toward meeting the requirements needed to improve the manufacture of the cellular products used in cellular immunotherapies., This research was funded by the Spanish Ministry of Science and Innovation (PID2020-115296RA-I00; PID2019-105622RB-I00; PID2021-128412OB-I00 European Union NextGenerationEU/PRTR, and the “Ramón y Cajal” program (RYC-2017-22614)) as well as the Generalitat de Catalunya (SGRCat 2021-00438; 2017-SGR-359; Tecnologies Emergents program of the General Directorate for Research – Nr. 001-P-001646, cofunded with FEDER Operational Program of Catalonia 2014–2020). The work was also supported by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck Institute for Medical Research (Heidelberg, Germany). The authors are grateful for the financial support received from Instituto de Salud Carlos III through Consorcio Centro de Investigación Biomédica en Red (CIBER) with the project “Gels4ACT” (Nr. BBN20PIV02). This research was also supported by the European Union’s Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397). The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2023-001263-S, CEX2019-000917-S and CEX2018-000789-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Method—Setups and Protocols for Operando Batteries Experiments at Variable Temperatures Applied to CaxTiS2 and Na3−xV2(PO4)3

  • Houdeville, Raphaëlle G.
  • Missyul, Alexander B.
  • Fuentes, V.
  • Prieto Moliné, Montserrat
  • Farre, F.
  • Gonzalez, Joaquín B.
  • Palacín, M. Rosa
  • Fauth, Francois
In this paper, we present two thermalized setups for in situ operando X-ray diffraction data collection in temperature ranging from 0° to 100 °C: a modified Leriche cell and a coin cell chamber. Both setups proved proper thermalization and representative electrochemistry. While the coin cell chamber may only be used in transmission mode, the modified Leriche cell can also be used in reflection mode. Two case studies are presented as example of operation: calcium insertion in TiS2 and sodium (de-)insertion in Na3−xV2(PO4)3. For the former, heating at 60 °C enables faster kinetics to form a solvent co-intercalated phase upon reduction, a process which is reversible upon reoxidation. For the later, Na3−xV2(PO4)3 is known to form a low temperature phase at ca 12 °C. Thanks to the thermalized setups, operando X-ray diffraction patterns were collected while cycling on the low temperature phase., We are grateful to Jose Ferrer (CELLS-ALBA synchrotron) for helpful discussions and effective making of the cells, to Jean-Noel Chotard and Sunkyu Park (Laboratoire de Reactivite et Chimie des Solides, LRCS) for providing the NVP samples used in this study, the LeRiChe's v2 cell prototype and their training and assistance, and to Ashley Black for help with TiS2 related experiments.This project has received funding from the European Union's Horizon 2020 research and innovation program under the MarieSklodowska-Curie grant agreement N degrees 754397 and PTI+TRANS-ENER+:"Alta Tecnologia clave en la transicion en el cicloenergetico,"part of the CSIC program for the Spanish Recovery,Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by theRegulation (EU) 2020/2094. The ALBA synchrotron is acknowledged for provision of beamtime, official and within the in-houseproject program (proposals 2023037580 and 2018093082-2,2023037580). ICMAB-CSIC members thank the Spanish Agencia Estatal de Investigacion Severo Ochoa Programme for Centres of Excellence in R & D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identification and ultrasensitive quantification of H. pylori infections on gastric and stool human samples with a photonic label-free nanobiosensor

  • Astua, Alejandro
  • Estévez, M. Carmen
  • Ramírez-Lázaro, M. José
  • Calvet, Xavier
  • Lario, Sergio
  • Lechuga, Laura M.
Helicobacter pylori is a widespread bacterium that infects the stomach, causing gastric disorders associated with high morbidity and mortality worldwide. Current methods for identifying and quantifying this pathogen rely on invasive and non-invasive tests. Although combining these methods allows accurate diagnosis, they have multiple drawbacks, and there is no single reliable gold standard test. New, more sensitive strategies involving molecular techniques, such as digital PCR, have been developed but require complex and expensive instruments. Herein, we implement and validat a nanophotonic bimodal waveguide (BiMW) biosensor for the sensitive and accurate detection of H. pylori in gastric biopsies and stool. This biosensor offers real-time, label-free detection, high sensitivity, and the capability to be integrated into compact devices. By employing monoclonal antibodies targeting specific membrane proteins found in H. pylori, the biosensor enables unique recognition of the bacterium, demonstrating its potential as an alternative diagnostic tool. The BiMW biosensor provides highly accurate H. pylori quantification in under 20 min, with limits of detection (LOD) of 89 ± 35 CFU/mL for antrum gastric biopsies and 82 ± 9 CFU/mL for stool samples. Clinical validation with 40 samples (20 gastric biopsies and 20 stool samples) showed sensitivity and specificity of 90 % for gastric biopsies and 95 % for stool samples, offering diagnostic reliability equivalent to semiquantitative ELISA tests and enabling more efficient and timely detection of H. pylori infections. This test can significantly improve the speed of diagnosis and contribute to the development of more effective strategies for H. pylori eradication., The ICN2 and the I3PT acknowledge the financial support received for the PyLOC project through the program ‘Seed Collaborative Projects CIBER-BBN-EHD’, funded by the Biomedical Research Networking Centre (CIBER). Alejandro Astúa acknowledges financial support from the European Union's Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement No. 754397. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The nanoB2A and the Grup de Recerca en Inflamació Gastrointestinal i Malalties Hepàtiques are consolidated research groups (‘Grup de Recerca’) of the Generalitat de Catalunya and are supported by the Departament de Recerca i Universitats de la Generalitat de Catalunya (No. 2021 SGR 00456 and 2021 SGR 01183). This work was also partially supported by the Instituto de Salud Carlos III, ISCIII-AES-FEDER (PI20/00817)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Extending decavanadate cyclability through hybridization for high-energy supercapacitors

  • Pokhriyal, Anukriti
  • González-Gil, Rosa M.
  • Bengoa, Leandro N.
  • Gómez-Romero, P.
Vanadium-based polyoxometalates (POMs) or polyoxovanadates can provide high specific capacitance and energy due to their lower mass as compared to other heavier polyoxometalates. However, due to their poor cyclability, polyoxovanadates have been rarely considered for energy storage applications. Immobilizing POM nanoclusters in activated carbon (AC) matrix is a very good way to fully harness their fast electroactivity while improving their stability. In this study, hybrid electrodes made of AC supported decavanadate POM nanoclusters with high-rate capabilities and improved cyclability were synthesized. AC-sodium decavanadate was first prepared and then sodium was substituted with an organic cation (tetrabutylammonium) to synthesize AC-tetrabutylammonium decavanadate. Both materials were characterized and tested in an asymmetric configuration with an organic electrolyte. The electrodes demonstrated fast and reversible redox activity leading to an improvement in specific capacitance. The asymmetric cells showed high specific energy and power (35.5 Wh kg<sup>−1</sup> at 68 W kg<sup>−1</sup>) and 91 % capacitance retention after 5000 cycles., Funding from Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) (grant PID2021–128390OB-I00, TED2021–130205B-C21, and PLEC2022–009328) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021–001214-S, funded by MCIN/AEI/10.13039.501100011033. Anukriti Pokhriyal acknowledges the funding by H2020-MSCA-COFUND-2016, DOC-FAM, Grant Agreement No 754397. This work has been carried out within the framework of doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autònoma de Barcelona (UAB). L.N. Bengoa thanks the support provided by Horizon Europe programme through a Marie Curie Postdoctoral Fellowship (Grant 101062498-POMZAB), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface Modification and Stabilization of Eutectic Gallium Indium Nanoparticles with an Electrochemically Active Ligand Using Low Molecular Weight Phosphorothioates in Water

  • Catalán Toledo, José
  • Romero Pallejà, Jordi
  • Crivillers, Núria
Liquid metal nanoparticles (LM NPs) have attracted significant attention owing to their unique properties and wide range of potential applications from electronics to biomedicine. In this study, we investigate the surface chemistry of eutectic gallium indium (EGaIn) NPs using different phosphonic acid derivatives in aqueous media. Our findings show that EGaIn NPs exhibit significant surface chemical composition changes when exposed to these ligands in solution during the ultrasonication-assisted synthesis in water, displaying optimal long-term colloidal stability in alkaline media. Interestingly, it is demonstrated for the first time that the use of sulfur-containing phosphonic acids, particularly phosphorothioates, leads to improved colloidal suspension stability and higher control over the NP size distribution. In addition, using a phosphorothioate derivative with a terminal N-hydroxysuccinimide group, a novel synthetic conjugation strategy to incorporate redox-active molecules, in particular ferrocene, onto the NP surface has been developed, permitting broadening of their potential applications in (electro)-catalysis and sensing., The authors thank Dr. Judith Oró from the Electron Microscopy Service at the ICMAB-CSIC and Kapil Gupta and Marcos Rosado from ICN2. We also thank the SOFT service at ICMAB-CSIC and Dr. Djafari for fruitful discussions and help on this project. This work was funded by the Spanish Ministry (MCIN/AEI/10.13039/501100011033/ERDF) with the project SENSATION PID2022-141393OB-I0, TED2021-122550B–C22, the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S and CEX2023-001263-S), and the Generalitat de Catalunya (2021-SGR-00443). J.C.-T. thanks the DOC-FAM Fellowship, grant agreement no. 754397 through H2020-MSCA-COFUND-2016. The authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). J.C.-T. is enrolled in the UAB Materials Science Ph.D. programme., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Therapeutic Drug Monitoring of Amikacin and Colistin in Patients with Multidrug-Resistant Gram-Negative Infections Using a Portable Plasmonic Biosensor

  • Astua, Alejandro
  • Estévez, M. Carmen
  • Luque, Sonia
  • Grau, Santiago
  • Sorlí, Luisa
  • Montero, Milagro
  • Horcajada, Juan P.
  • Lechuga, Laura M.
Innovative diagnostic tools that enhance antibiotic routine monitoring can improve the management of infections caused by antibiotic-resistant bacteria. Therapeutic drug monitoring (TDM) involves measuring drug levels in the patient bloodstream to ensure optimal efficacy and safety, particularly for drugs with a narrow therapeutic index (TI), assisting in dosage control and toxicity risk management. Amikacin (AK) and colistin (CS) are crucial antibiotics for treating multidrug-resistant (MDR) bacteria but they have side effects that require a precise TDM to try to minimize them. Current analytical techniques like immunoassays, high-performance liquid chromatography (HPLC), and liquid chromatography-mass spectrometry (LC-MS) are gold standards for the antibiotic analysis, but they may require transferring the human samples to centralized facilities, delaying crucial results and turnaround time. In contrast, plasmonic biosensors offer advantages for clinical diagnostics, enabling real-time drug detection with minimal sample volume and processing, being ideal for point-of-care applications. We have implemented plasmonic biosensors to quantify and rapidly monitor blood levels of amikacin and colistin. The biosensors provide high specificity and sensitivity, with limits of detection (LOD) of 0.92 ng/mL (1.57 nM) for amikacin and 9.11 pg/mL (7.88 pM) for colistin in blood serum. Statistics analyses demonstrated a strong correlation between the biosensor evaluation and the standard analytical methods (Spearman's correlation coefficient of 0.9171 (p-value < 0.001) and 0.7435 (p-value = 0.04) for amikacin and colistin, respectively). Our plasmonic biosensors offer in addition, simplicity, portability, and label-free evaluation, with multiplexed capabilities. The rapid turnaround of results in under 20 min, coupled with minimal sample processing, enhances the feasibility of personalized TDM, supporting tailored treatment strategies that can improve patient outcomes. This work lays the foundation for creating an integrated point-of-care biosensor platform for effectively performing TDM of antibiotics and other drugs in real-time at the patient's bedside in clinical settings., We acknowledge the financial support received for the PHITBAC project (PLEC2021-007739), funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. A.A. acknowledges the financial support from the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 754397. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The nanoB2A is a consolidated research group (‘Grup de Recerca’) of the Generalitat de Catalunya and is supported by the Departament de Recerca i Universitats de la Generalitat de Catalunya (no. 2021 SGR 00456)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gut-on-a-chip: Mimicking and monitoring the human intestine

  • Marrero, Denise
  • Pujol-Vila, Ferran
  • Vera, Daniel
  • Gabriel, Gemma
  • Illa, Xavi
  • Elizalde-Torrent, Aleix
  • Alvarez, Mar
  • Villa, Rosa
Over the last few years, the intestine has been extensively studied using in vitro microfluidic systems, commonly known as gut-on-a-chip (GOC) devices. This interest has been due not only to the importance of the intestine's proper functions but also to the relationship that this organ and the microbiota that inhabits it has with the rest of the body's organs. The increased complexity of these in vitro systems, together with the need to improve our understanding of intestinal physiology interdependencies, has led to greater focus on the integration of biosensors within these devices. However, the current number of GOC devices with integrated sensors for monitoring relevant physiological parameters are very limited and demand the use of external analytical techniques that delay the analysis and prevent real-time decision-making. This paper reviews the various materials, technologies, and structures that have been used both for mimicking the physiology of the intestine and monitoring relevant physiological parameters, such as permeability of the gut barrier, dissolved oxygen concentration, cytokines profile and the production of microbial short-chain fatty acids. We also propose alternative biosensing techniques demonstrated in other in vitro and lab-on-a-chip devices that could be translated to GOC models. A critical analysis of the requirements, limitations, and current challenges on the microenvironment replication and monitorization of GOC models is included, with a particular focus on the physiological parameters and biomarkers that should be detected simultaneously in real-time to get a proper framework of the gut function that until now, have not received the necessary attention., The authors acknowledge the support from the Ministerio de Ciencia Innovacion y Universidades (MICIU/FEDER, EU), in Spain, through GUMICHIP project (RTI2018-096786-B-I00). D. M. and D. V. acknowledge that this work has been done in the framework of the Ph.D. program in Electrical and Telecommunication Engineering at the Universitat Autònoma de Barcelona. D. V. was supported by the Marie Skłodowska-Curie COFUND PhD fellowship (grant agreement No 754397). D. M. was supported by the FPI Ph.D. fellowship (PRE2019-089214)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Advances in Conductive Nanomaterials for Cardiac Arrhythmia and Future Directions in Bioevaluation Strategies

  • Srinivasan, Sumithra Y.
  • Laromaine, Anna
Cardiac arrhythmia (CA), characterized by irregular heart rhythms, affects nearly 90% of individuals with cardiovascular diseases. Commonly triggered by myocardial infarction (MI) or ion channel dysfunctions, CA is traditionally treated using pacemakers, cardioversion, ablation, and anti-arrhythmic drugs. Recently, emerging strategies like cardiac patches and injectable formulations with conductive nanomaterials (CNMs) have shown promise in restoring cardiac rhythm post-MI. This review explores CNMs-such as gold nanoparticles, carbon nanotubes, and conjugated polymers-that mimic the electrical and mechanical properties of native cardiac tissue. While in vitro studies show encouraging results, translating CNMs to clinical settings faces challenges. Few studies have assessed their safety and efficacy in rodent models, and none in larger animals. This gap stems from the complexity and ethical hurdles of large animal research. To address this, the review advocates using small animal models like zebrafish, Drosophila melanogaster, and Caenorhabditis elegans. These models offer insights into pharmacokinetics, pharmacodynamics, genetic effects, and cardiac parameters such as ejection fraction and cardiac output-data often unattainable in vitro. Such platforms can better evaluate CNMs' safety and efficacy than 2D/3D cultures, accelerating progress toward clinical application., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the National Research Agency (AEI) and European Regional Development Funds (ERDF/FEDER), project BIOSOFT-REGE ref PID2021-122645OB-I00, BACTIVE ref PID2024-1576370B-I00, BIOCCHIP ref PDC2023-145826-I00, the Program/Generalitat de Catalunya (2021SGR00446 project), the Severo Ochoa Program of the Spanish Ministry of Science and Innovation (MICINN_Grant CEX2018−000,789-S, CEX2023-001263-S), and the projects FIP-BEAT, and the PDC2022-133755-I00/AEI/10.13039/501100011033 European Union NextGeneration EU/PRTR. This research was also supported by the European Union's Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397), European Union’s Horizon Europe research and innovation program under grant agreement No 101057527 (NextGEM). Authors participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics toward a circular economy (SusPlast), and in CSIC-Conexion Nanomedicina del CSIC, EPNOE network, and Red Nanocare 2.0, Grant RED2022-134560-T funded by MCIN/AEI/10.13039/501100011033. The authors acknowledge the use of Biorender.com., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptation of Cu(In, Ga)Se2 photovoltaics for full unbiased photocharge of integrated solar vanadium redox flow batteries

  • Murcia López, Sebastián
  • Chakraborty, Monalisa
  • Carretero, Nina M.
  • Flox, Cristina
  • Morante i Lleonart, Joan Ramon
  • Andreu Arbella, Teresa
The integration of photovoltaics and vanadium redox flow batteries (VRFBs) is a promising alternative for the direct conversion and storage of solar energy in a single device, considering their inherent higher energy density versus other redox pairs. However, this integration is not seamless unless the photovoltaic system is customized to the voltage needs of the battery, which unlike artificial photosynthesis, continuously increase with the state-of-charge. We have developed an integrated solar VRFB with adapted low-cost Cu(In, Ga)Se2 modules of 3 and 4 series-connected cells (solar efficiency of mini-solar module 8.1%), and considering the voltage requirements (1.3-1.6 V), we have evaluated the influence of the photovoltaic operation region on the final efficiency of the solar VRFB. Full unbiased photocharge under 1 Sun illumination has been achieved resulting in high energy (77%), solar-to-charge (7.5%) and overall round trip energy conversion efficiencies (5.0%) exceeding the values reported in the literature for other solar VRFBs, thus demonstrating the feasibility and intrinsic potential of adapting low-cost commercial photovoltaics to such energy storage systems.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Engineering tissue barrier models on hydrogel microfluidic platforms

  • Vera, Daniel
  • García Díaz, María
  • Torras Andrés, Núria
  • Alvarez, Mar
  • Villa, Rosa
  • Martínez Fraiz, Elena
Tissue barriers play a crucial role in human physiology by establishing tissue compartmentalization and regulating organ homeostasis. At the interface between the extracellular matrix (ECM) and flowing fluids, epithelial and endothelial barriers are responsible for solute and gas exchange. In the past decade, microfluidic technologies and organ-on-chip devices became popular as in vitro models able to recapitulate these biological barriers. However, in conventional microfluidic devices, cell barriers are primarily grown on hard polymeric membranes within polydimethylsiloxane (PDMS) channels that do not mimic the cell¿ECM interactions nor allow the incorporation of other cellular compartments such as stromal tissue or vascular structures. To develop models that accurately account for the different cellular and acellular compartments of tissue barriers, researchers have integrated hydrogels into microfluidic setups for tissue barrier-on-chips, either as cell substrates inside the chip, or as self-contained devices. These biomaterials provide the soft mechanical properties of tissue barriers and allow the embedding of stromal cells. Combining hydrogels with microfluidics technology provides unique opportunities to better recreate in vitro the tissue barrier models including the cellular components and the functionality of the in vivo tissues. Such platforms have the potential of greatly improving the predictive capacities of the in vitro systems in applications such as drug development, or disease modeling. Nevertheless, their development is not without challenges in their microfabrication. In this review, we will discuss the recent advances driving the fabrication of hydrogel microfluidic platforms and their applications in multiple tissue barrier models.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

CCL21-loaded 3D hydrogels for T cell expansion and differentiation

  • Pérez del Río, Eduardo
  • Santos, Fabião
  • Rodriguez Rodriguez, Xavier
  • Martínez-Miguel, Marc
  • Roca-Pinilla, Ramon
  • Alomar, Oscar
  • Garcia-Fruitos, Elena
  • Veciana, Jaume
  • Spatz, Joachim P.
  • Ratera, Imma
  • Guasch, Judith
Recent achievements in the field of immunotherapy, such as the development of engineered T cells used in adoptive cell therapy, are introducing more efficient strategies to combat cancer. Nevertheless, there are still many limitations. For example, these T cells are challenging to manufacture, manipulate, and control. Specifically, there are limitations in producing the large amounts of therapeutic T cells needed for these therapies in a short period of time and in an economically viable manner. In this study, three-dimensional (3D) poly(ethylene) glycol (PEG) hydrogels covalently combined with low molecular weight heparin are engineered to resemble the lymph nodes, where T cells reproduce. In these hydrogels, PEG provides the needed structural and mechanical properties, whereas heparin is used as an anchor for the cytokine CCL21, which is present in the lymph nodes, and can affect cell migration and proliferation. The 3D structure of the hydrogel in combination with its loading capacity result in an increased primary human CD4+ T cell proliferation compared to the state-of-the-art expansion systems consisting of artificial antigen presenting cells. Thus, we present a new tool for adoptive cell therapy to help achieving the large numbers of cells required for therapy of selected phenotypes targeted against cancer cells, by mimicking the lymph nodes., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Therapeutic drug monitoring of amikacin and colistin in patients with multidrug-resistant gram-negative infections using a portable plasmonic biosensor

  • Astúa, Alejandro
  • Estevez, Maria Carmen
  • Luque Pardos, Sònia
  • Grau Cerrato, Santiago
  • Sorli Redó, M. Luisa
  • Montero, Maria Milagro
  • Horcajada Gallego, Juan Pablo
  • Lechuga, Laura M.
Innovative diagnostic tools that enhance antibiotic routine monitoring can improve the management of infections caused by antibiotic-resistant bacteria. Therapeutic drug monitoring (TDM) involves measuring drug levels in the patient bloodstream to ensure optimal efficacy and safety, particularly for drugs with a narrow therapeutic index (TI), assisting in dosage control and toxicity risk management. Amikacin (AK) and colistin (CS) are crucial antibiotics for treating multidrug-resistant (MDR) bacteria but they have side effects that require a precise TDM to try to minimize them. Current analytical techniques like immunoassays, high-performance liquid chromatography (HPLC), and liquid chromatography-mass spectrometry (LC-MS) are gold standards for the antibiotic analysis, but they may require transferring the human samples to centralized facilities, delaying crucial results and turnaround time. In contrast, plasmonic biosensors offer advantages for clinical diagnostics, enabling real-time drug detection with minimal sample volume and processing, being ideal for point-of-care applications. We have implemented plasmonic biosensors to quantify and rapidly monitor blood levels of amikacin and colistin. The biosensors provide high specificity and sensitivity, with limits of detection (LOD) of 0.92 ng/mL (1.57 nM) for amikacin and 9.11 pg/mL (7.88 pM) for colistin in blood serum. Statistics analyses demonstrated a strong correlation between the biosensor evaluation and the standard analytical methods (Spearman's correlation coefficient of 0.9171 (p-value < 0.001) and 0.7435 (p-value = 0.04) for amikacin and colistin, respectively). Our plasmonic biosensors offer in addition, simplicity, portability, and label-free evaluation, with multiplexed capabilities. The rapid turnaround of results in under 20 min, coupled with minimal sample processing, enhances the feasibility of personalized TDM, supporting tailored treatment strategies that can improve patient outcomes. This work lays the foundation for creating an integrated point-of-care biosensor platform for effectively performing TDM of antibiotics and other drugs in real-time at the patient's bedside in clinical settings., We acknowledge the financial support received for the PHITBAC project (PLEC2021-007739), funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. A.A. acknowledges the financial support from the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 754397. The ICN2 is supported by the Severo Ochoa Centres of Excellence program, grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The nanoB2A is a consolidated research group (‘Grup de Recerca’) of the Generalitat de Catalunya and is supported by the Departament de Recerca i Universitats de la Generalitat de Catalunya (no. 2021 SGR 00456).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effects of solar irradiation on thermally driven CO2 methanation using Ni/CeO2-based catalyst

  • Golovanova, Viktoria
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Golovanov, Viacheslav
  • Rantala, Tapio T.
  • Andreu Arbella, Teresa
  • Morante i Lleonart, Joan Ramon
Utilization of the renewable energy sources is one of the main challenges in the state-of-the-art technologies for CO2 recycling. Here we have taken advantage of the solar light harvesting in the thermocatalytic approach to carbon dioxide methanation. The large-surface-area Ni/CeO2 catalyst produced by a scalable low-cost method was characterized and tested in the dark and under solar light irradiation conditions. Light-assisted CO2 con-version experiments as well as in-situ DRIFT spectrometry, performed at different illumination intensities, have revealed a dual effect of the incident photons on the catalytic properties of the two-component Ni/CeO2 catalyst. On the one hand, absorbed photons induce a localized surface plasmon resonance in the Ni nanoparticles fol-lowed by dissipation of the heat to the oxide matrix. On the other hand, the illumination activates the photo-catalytic properties of the CeO2 support, which leads to an increase in the concentration of the intermediates being precursor for methane production. Analysis of the methane production at different temperatures and illumination conditions has shown that the methanation reaction in our case is controlled by a photothermally- activated process. The used approach has allowed us to increase the reaction rate up to 2.4 times and conse-quently to decrease the power consumption by 20 % under solar illumination, thus replacing the conventional thermal activation of the reaction with a green energy source.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Three-dimensional cell culture of chimeric antigen receptor T cells originated from peripheral blood mononuclear cells towards cellular therapies

  • Pérez del Río, Eduardo
  • Roman Alonso, Macarena
  • Rius Ruiz, Irene
  • Santos, Fabião
  • Castellote Borrell, Miquel
  • Veciana, Jaume
  • Arribas, Joaquin
3D cell culture; CAR T cells; Adoptive cell therapy, Cultiu cel·lular 3D; Cèl·lules T CAR; Teràpia cel·lular adoptiva, Cultivo celular 3D; Células T CAR; Terapia celular adoptiva, Background aims With the objective of improving the ex vivo production of therapeutic chimeric antigen receptor (CAR) T cells, we explored the addition of three-dimensional (3D) polystyrene scaffolds to standard suspension cell cultures. Methods We aimed to mimic the structural support given by the lymph nodes during in vivo lymphocyte expansion. Results We observed an increase in cell proliferation compared with standard suspension systems as well as an enhanced cytotoxicity toward cancer cells. Moreover, we directly obtained the CAR T cells from peripheral blood mononuclear cells, thus minimizing the ex vivo manipulation of the therapeutic cells and opening the way to synergies among different cell populations. Conclusions We propose the use of commercially available 3D polystyrene systems to improve the current immune cell cultures and resulting cell products for emerging cellular (immuno)therapies., This research was funded by Instituto de Salud Carlos III through Consorcio Centro de Investigación Biomédica en Red (CIBER) with the projects “Alycia” (Nr. BBN18PI01) and “Gels4ACT” (Nr. BBN20PIV02). The authors are also grateful for the financial support received from the Spanish Ministry of Science and Innovation (PID2020-115296RA-I00, PID2019-105622RBI00 and the “Ramón y Cajal” program [RYC-2017-22614]). The work was supported as well by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany). This research was also supported by the European Union's Horizon 2020 research and innovation programme H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397). The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

How Nanophotonic Label-Free Biosensors Can Contribute to Rapid and Massive Diagnostics of Respiratory Virus Infections, COVID-19 Case

  • Soler Aznar, Maria|||0000-0001-7232-2277
  • Estévez, M. Carmen|||0000-0003-3694-7186
  • Cardenosa-Rubio, Maria|||0000-0001-8616-5030
  • Astua, Alejandro
  • Lechuga, Laura M|||0000-0001-5187-5358
The global sanitary crisis caused by the emergence of the respiratory virus SARS-CoV-2 and the COVID-19 outbreak has revealed the urgent need for rapid, accurate, and affordable diagnostic tests to broadly and massively monitor the population in order to properly manage and control the spread of the pandemic. Current diagnostic techniques essentially rely on polymerase chain reaction (PCR) tests, which provide the required sensitivity and specificity. However, its relatively long time-to-result, including sample transport to a specialized laboratory, delays massive detection. Rapid lateral flow tests (both antigen and serological tests) are a remarkable alternative for rapid point-of-care diagnostics, but they exhibit critical limitations as they do not always achieve the required sensitivity for reliable diagnostics and surveillance. Next-generation diagnostic tools capable of overcoming all the above limitations are in demand, and optical biosensors are an excellent option to surpass such critical issues. Label-free nanophotonic biosensors offer high sensitivity and operational robustness with an enormous potential for integration in compact autonomous devices to be delivered out-of-the-lab at the point-of-care (POC). Taking the current COVID-19 pandemic as a critical case scenario, we provide an overview of the diagnostic techniques for respiratory viruses and analyze how nanophotonic biosensors can contribute to improving such diagnostics. We review the ongoing published work using this biosensor technology for intact virus detection, nucleic acid detection or serological tests, and the key factors for bringing nanophotonic POC biosensors to accurate and effective COVID-19 diagnosis on the short term.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Operando Synchrotron X-ray Diffraction in Calcium Batteries, Insights into the Redox Activity of 1D CaCoMO (M = Co and Mn)

  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Monti, Damien|||0000-0002-8937-2518
  • Frontera, Carlos|||0000-0002-0091-4756
  • Tchitchekova, Deyana|||0000-0003-0214-4115
  • Houdeville, Raphaëlle|||0000-0002-6100-1432
  • Fauth, François|||0000-0001-9465-3106
  • Palacín, M. Rosa|||0000-0001-7351-2005
1D CaCoMO (M = Co z = 0, M = Mn z = 1, and M = Fe z = 0.4) were prepared and tested electrochemically. While the iron-containing phase was not found to be active, the iron- and manganese-containing phases were found to be potentially interesting as positive electrode materials for calcium metal-based high-energy battery technologies and were investigated by operando synchrotron X-ray diffraction. Results indicate that electrochemically driven calcium deintercalation from the crystal structure (ca. 0.7 mol per formula unit) takes place upon oxidation in both cases. The oxidized phases have incommensurate modulated crystal structures with the space group R 3 m (00γ)0s and a = 9.127(1) Å, c = 2.4226(3) Å and c = 4.1857(3) Å, and γ = 0.579 (M = Co) and a = 9.217(1) Å, c = 4.9076(4) Å and c = 4.3387(4) Å, and γ = 1.139 (M = Mn), which exhibit differences due to the presence of manganese and Mn/Co ordering. The degree of calcium re-intercalation within the structure was found to be extremely limited, if any. Complementary experiments carried out in lithium cells did not show any reversibility either, thus pointing at intrinsic structural/migration constraints in the oxidized phase rather than slow kinetics of high desolvation energies associated with divalent ion charge carriers.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High frequency response of thick REBCO coated conductors in the framework of the FCC study

  • Romanov, Artur
  • Krkotić, Patrick
  • Telles, Guilherme
  • O'Callaghan, Joan
  • Pont, Montse
  • Perez, Francis
  • Granados García, Xavier
  • Calatroni, Sergio
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Gutiérrez, Joffre
A thorough microwave response study of high temperature superconductors, considered as an alternative beam screen coating, has become integral in the design decisions for CERN's future research infrastructure. Here, we present the surface resistance of various (RE = rare earth) coated conductors available in large scale as a function of magnetic field in a broad temperature range measured by a Hakki-Coleman type resonator with resonant frequency . Analysis of the high frequency dissipation supported by DC transport characterization reveals the vortex dynamics in thick films. Determined microscopic vortex parameters span over a wide range of magnitudes and reflect the relevance of the superconducting layer's microstructure. We demonstrate that the depinning frequencies surpass , which confirms the operation in high performing, low dissipation pinning regime at measurement conditions. Surface impedance extrapolation to FCC-hh conditions points towards a significant outperformance of copper by coated conductors in terms of surface resistance. The surface resistance margins would open up potential ways for a more efficient frontier circular collider.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Induced ligno-suberin vascular coating and tyramine-derived hydroxycinnamic acid amides restrict Ralstonia solanacearum colonization in resistant tomato

  • Kashyap, Anurag|||0000-0003-2622-8209
  • Jiménez Jiménez, Álvaro Luis|||0000-0002-9406-4595
  • Zhang, Weiqi|||0000-0002-2535-1398
  • Capellades, Montserrat|||0000-0001-9514-2885
  • Srinivasan, Sumithra Yasaswini|||0000-0002-0473-9801
  • Laromaine, Anna|||0000-0002-4764-0780
  • Serra Figueras, Olga|||0000-0002-1678-0932
  • Figueras, Mercè|||0000-0002-6288-1830
  • Rencoret, Jorge|||0000-0003-2728-7331
  • Gutiérrez Casbas, Ana|||0000-0002-8823-9029
  • Valls, Marc|||0000-0003-2312-0091
  • Sánchez Coll, Núria|||0000-0002-8889-0399
Tomato varieties resistant to the bacterial wilt pathogen Ralstonia solanacearum have the ability to restrict bacterial movement in the plant. Inducible vascular cell wall reinforcements seem to play a key role in confining R. solanacearum into the xylem vasculature of resistant tomato. However, the type of compounds involved in such vascular physico-chemical barriers remain understudied, while being a key component of resistance. Here we use a combination of histological and live-imaging techniques, together with spectroscopy and gene expression analysis to understand the nature of R. solanacearum-induced formation of vascular coatings in resistant tomato. We describe that resistant tomato specifically responds to infection by assembling a vascular structural barrier formed by a ligno-suberin coating and tyramine-derived hydroxycinnamic acid amides. Further, we show that overexpressing genes of the ligno-suberin pathway in a commercial susceptible variety of tomato restricts R. solanacearum movement inside the plant and slows disease progression, enhancing resistance to the pathogen. We propose that the induced barrier in resistant plants does not only restrict the movement of the pathogen, but may also prevent cell wall degradation by the pathogen and confer anti-microbial properties, effectively contributing to resistance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of solar irradiation on thermally driven CO2 methanation using Ni/CeO2-based catalyst

  • Golovanova, Viktoria|||0000-0002-4008-0733
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Golovanov, Viacheslav
  • Rantala Tapio, T.
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
Utilization of the renewable energy sources is one of the main challenges in the state-of-the-art technologies for CO recycling. Here we have taken advantage of the solar light harvesting in the thermocatalytic approach to carbon dioxide methanation. The large-surface-area Ni/CeO catalyst produced by a scalable low-cost method was characterized and tested in the dark and under solar light irradiation conditions. Light-assisted CO conversion experiments as well as in-situ DRIFT spectrometry, performed at different illumination intensities, have revealed a dual effect of the incident photons on the catalytic properties of the two-component Ni/CeO catalyst. On the one hand, absorbed photons induce a localized surface plasmon resonance in the Ni nanoparticles followed by dissipation of the heat to the oxide matrix. On the other hand, the illumination activates the photocatalytic properties of the CeO support, which leads to an increase in the concentration of the intermediates being precursor for methane production. Analysis of the methane production at different temperatures and illumination conditions has shown that the methanation reaction in our case is controlled by a photothermally-activated process. The used approach has allowed us to increase the reaction rate up to 2.4 times and consequently to decrease the power consumption by 20 % under solar illumination, thus replacing the conventional thermal activation of the reaction with a green energy source.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Supercritical CO Synthesis of Porous Metalloporphyrin Frameworks, Application in Photodynamic Therapy

  • Kubovics, Márta|||0000-0002-2441-8562
  • Careta, Oriol|||0000-0003-1333-0300
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Romo-Islas, Guillermo|||0000-0002-2841-9546
  • Rodríguez Raurell, Laura|||0000-0003-1289-1587
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
  • Nogués, Carme|||0000-0002-6361-8559
  • López-Periago, Ana M.|||0000-0002-3777-3205
A series of porous metalloporphyrin frameworks prepared from the 5,10,15,20-tetra(4-pyridyl)porphyrin (HTPyP) linker and four metal complexes, M(hfac) M = Cu(II), Zn(II), Co(II), and Ni(II) (hfac: 1,1,1,5,5,5-hexafluoroacetylacetonate), were obtained using supercritical CO (scCO) as a solvent. All the materials, named generically as [M-TPyP], formed porous metal-organic frameworks (MOFs), with surface areas of ∼450 m 2 g -1. All MOFs were formed through the coordination of the metal to the exocyclic pyridine moieties in the porphyrin linker. For Cu(II), Zn(II), and Co(II), incomplete metal coordination of the inner pyrrole ring throughout the structure was observed, giving place to MOFs with substitutional defects and leading to a certain level of disorder and limited crystallinity. These samples, prepared using scCO, were precipitated as nano- to micrometric powders. Separately, a layering technique from a mixture of organic solvents was used to crystallize high-quality crystals of the Co(II) based MOF, obtained with the formula [{Co(hfac)}HTPyP]. The crystal structure of this MOF was elucidated by single-crystal synchrotron X-ray diffraction. The Zn(II)-based MOF was selected as a potential photodynamic therapy drug in the SKBR-3 tumoral cell line showing outstanding performance. This MOF resulted to be nontoxic, but after 15 min of irradiation at 630 nm, using either 1 or 5 μM concentration of the product, almost 70% of tumor cells died after 72 h.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impact of Battery Energy System Integration in Frequency Control of an Electrical Grid with Wind Power

  • Pokhriyal, Anukriti
  • Domínguez-García, José Luis
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
The rapid increase in the integration of renewable energy sources into the electrical grid is posing new challenges for the dynamic responses due to the global inertia reduction. In this regard, the impact on frequency stability of such reduction and the potential support from wind power have been investigated lately. However, it is well-known that the variability of wind power and its reduced inertia may not be enough to handle the power unbalance. Energy storage systems (e.g., batteries) may provide the required additional flexibility to ensure proper response. In this paper, an analysis of how the different control loops for frequency support on wind power and batteries interact and perform is presented. To gain insights from the different impacts, a sensitivity analysis comparison for frequency regulation through (i) inertia and droop control of a variable speed wind turbine and (ii) battery is performed. The analysis was carried out through simulations using the well-known 4 generator 2-area model adapted to include a wind farm. From a battery perspective, its ramping capabilities were varied to provide frequency regulation. The paper shows how, depending on the control parameters and battery size, the frequency response may even become unstable due to interactions of the various pieces of technology. Thus, it shows that coordinated actions, control optimization and grid status among different actors on the grid (as battery and wind) is required for stable operation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanostructured Thick Electrode Strategies toward Enhanced Electrode-Electrolyte Interfaces

  • Pokhriyal, Anukriti
  • González-Gil, Rosa Maria|||0000-0002-0913-9629
  • Bengoa, Leandro N.|||0000-0002-0608-8248
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
This article addresses the issue of bulk electrode design and the factors limiting the performance of thick electrodes. Indeed, one of the challenges for achieving improved performance in electrochemical energy storage devices (batteries or supercapacitors) is the maximization of the ratio between active and non-active components while maintaining ionic and electronic conductivity of the assembly. In this study, we developed and compared supercapacitor thick electrodes using commercially available carbons and utilising conventional, easily scalable methods such as spray coating and freeze-casting. We also compared different binders and conductive carbons to develop thick electrodes and analysed factors that determine the performance of such thick electrodes, such as porosity and tortuosity. The spray-coated electrodes showed high areal capacitances of 1428 mF cm at 0.3 mm thickness and 2459 F cm at 0.6 mm thickness.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hydrothermal Fabrication of Carbon-Supported Oxide-Derived Copper Heterostructures, A Robust Catalyst System for Enhanced Electro-Reduction of CO2 to C2H4

  • Tandava, Venkata S.R.K.|||0000-0002-3142-6528
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Morante, Joan Ramon|||0000-0002-4981-4633
Anthropogenic CO can be converted to alternative fuels and value-added products by electrocatalytic routes. Copper-based catalysts are found to be the star materials for obtaining longer-chain carbon compounds beyond 2e products. Herein, we report a facile hydrothermal fabrication of a highly robust electrocatalyst: in-situ grown heterostructures of plate-like CuO-CuO on carbon black. Simultaneous synthesis of copper-carbon catalysts with varied amounts of copper was conducted to determine the optimum blend. It is observed that the optimum ratio and structure have aided in achieving the state of art faradaic efficiency for ethylene >45 % at -1.6 V vs. RHE at industrially relevant high current densities over 160 to 200 mA ⋅ cm. It is understood that the in-situ modification of CuO to CuO during the electrolysis is the driving force for the highly selective conversion of CO to ethylene through the *CO intermediates at the onset potentials followed by C-C coupling. The excellent distribution of Cu-based platelets on the carbon structure enables rapid electron transfer and enhanced catalytic efficiency. It is inferred that choosing the right composition of the catalyst by tuning the catalyst layer over the gas diffusion electrode can substantially affect the product selectivity and promote reaching the potential industrial scale.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photoswitching activation of a ferrocenyl-stilbene analogue by its covalent grafting to gold

  • Bejarano, Francesc|||0000-0002-8006-7138
  • Gutiérrez, Diego|||0000-0001-6007-0906
  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Roca-Sanjuán, Daniel|||0000-0001-6495-2770
  • Gierschner, Johannes|||0000-0001-8177-7919
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Rovira Angulo, Concepció|||0000-0002-2365-9479
  • Crivillers, Núria|||0000-0001-6538-2482
Until now, surface-deposited stilbenes have been much less studied than other photochromic systems. Here, an asymmetrically substituted styrene incorporating a redox-active ferrocene moiety and a terminal alkyne group has been synthesised to investigate its photoisomerization in solution, and upon the formation of chemisorbed self-assembled monolayers through a carbon-gold bond formation. Charge transport measurements across the monolayers reveal that upon chemical linkage to the gold substrate there is an alteration of the isomerization pathway, which favours the trans to cis conversion, which is not observed in solution. The experimental observations are interpreted based on quantum chemistry calculations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Redox-Active Au Nanoparticles Self-Assembled at Liquid-Liquid Interface via C-Au Functionalization for Dye Degradation Electrocatalysis

  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Djafari, Jamila|||0000-0003-2817-0338
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Crivillers, Núria|||0000-0001-6538-2482
This work presents the synthesis of poly(vinylpyrrolidone)-stabilized gold nanoparticles (Au NPs) and their subsequent functionalization with molecules bearing terminal alkynes. The ligand exchange occurs at the liquid-liquid interface (LLI), resulting in the formation of Au NPs stabilized through the covalent C-Au functionalization. Simultaneously, structured composite films are formed, driven by the self-assembly of the Au NPs supported by the polymer. A comparative analysis involving three distinct alkyne-terminated derivatives reveals that film formation is favored when the ligand includes an aromatic unit such as in a ferrocenyl-stilbene derivative. The LLI films can be easily transferred to solid a support for their characterization. Additionally, it is demonstrated that these films serve as a potential electrocatalytic platform. As a proof of concept, we demonstrate that the electrochemically active ferrocene-based Au NPs films can efficiently remove methylene blue via an electro-Fenton-like reaction, surpassing the efficiency of the non-redox phenylacetylene Au NP films.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interrogating the CISS effect in chiral and paramagnetic organic radicals, the impact of the molecular spin over the total spin polarization

  • De Sousa, J. Alejandro|||0000-0002-7948-8162
  • Mayorga-Burrezo, Paula|||0000-0002-2747-9344
  • Míguez-Lago, Sandra|||0000-0002-0424-3574
  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Ramos-Tomás, Raúl|||0000-0001-8325-7140
  • Ortuño, Ana|||0000-0001-8562-7248
  • Zotti, Linda A.|||0000-0002-5292-6759
  • Palacios, Juan Jose|||0000-0003-2378-0866
  • González Campaña, Araceli|||0000-0001-5483-5642
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Crivillers, Núria|||0000-0001-6538-2482
Continuous research on new chiral molecular materials brings new exciting properties to the field of molecular electronics. The discovery of the chirality-induced spin selectivity (CISS) effect has expanded the list of applications for chiral structures, opening promising avenues for their exploitation in molecular spintronics. In this work, the persistent propeller-like organic perchlorotriphenylmethyl (PTM) radical is investigated as a potential spin filter combining chirality and paramagnetism. In particular, two different PTM derivatives, mono- and bis-functionalized, with one or two terminal alkyne groups have been used for the preparation of enantioenriched solid-state assemblies. The analysis of their chiroptical properties reveals that the functionalization does not play a crucial role in their final conformational stability and highlights the dissimilarities of the racemization barriers in solution and solid states. Spin-dependent electrochemical and charge transport measurements of enantioenriched PTM-based self-assembled monolayers did not reveal the existence of the CISS effect. Density functional theory quantum transport calculations show that the most dominant contribution to the spin polarization would not be CISS-related polarization, but the one intrinsically associated with the radical spin. Nevertheless, at room temperature this contribution is affected by thermal fluctuations averaging to a net zero spin polarization.
Scientia. Dipòsit d'Informació Digital del Departament de Salut
Publicación Artículo científico (JournalArticle)

Three-dimensional cell culture of chimeric antigen receptor T cells originated from peripheral blood mononuclear cells towards cellular therapies

  • Pérez del Río, Eduardo
  • Roman Alonso, Macarena
  • Rius Ruiz, Irene
  • Santos, Fabião
  • Castellote Borrell, Miquel
  • Veciana, Jaume
  • Arribas, Joaquin
3D cell culture; CAR T cells; Adoptive cell therapy, Cultiu cel·lular 3D; Cèl·lules T CAR; Teràpia cel·lular adoptiva, Cultivo celular 3D; Células T CAR; Terapia celular adoptiva, Background aims With the objective of improving the ex vivo production of therapeutic chimeric antigen receptor (CAR) T cells, we explored the addition of three-dimensional (3D) polystyrene scaffolds to standard suspension cell cultures. Methods We aimed to mimic the structural support given by the lymph nodes during in vivo lymphocyte expansion. Results We observed an increase in cell proliferation compared with standard suspension systems as well as an enhanced cytotoxicity toward cancer cells. Moreover, we directly obtained the CAR T cells from peripheral blood mononuclear cells, thus minimizing the ex vivo manipulation of the therapeutic cells and opening the way to synergies among different cell populations. Conclusions We propose the use of commercially available 3D polystyrene systems to improve the current immune cell cultures and resulting cell products for emerging cellular (immuno)therapies., This research was funded by Instituto de Salud Carlos III through Consorcio Centro de Investigación Biomédica en Red (CIBER) with the projects “Alycia” (Nr. BBN18PI01) and “Gels4ACT” (Nr. BBN20PIV02). The authors are also grateful for the financial support received from the Spanish Ministry of Science and Innovation (PID2020-115296RA-I00, PID2019-105622RBI00 and the “Ramón y Cajal” program [RYC-2017-22614]). The work was supported as well by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany). This research was also supported by the European Union's Horizon 2020 research and innovation programme H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397). The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S).