Pasar al contenido principal

Re-EVOLución de la Tecnología de baterías. Desarrollo integral de celdas híbridas basadas en electrodos/electrolitos Tri-dimensionales construidos a partir de nanomateriales (REVOLT)

PLEC2022-009328

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

To flow or not to flow. A perspective on large-scale stationary electrochemical energy storage

  • Pokhriyal, Anukriti
  • Rueda-García, Daniel
  • Gómez-Romero, P.
This article is part of the themed collection: Recent Open Access Articles., Energy storage is experiencing a renaissance as a result of the growing number of vital applications such as internet of things, smart grids, electric vehicles, renewable energy storage, etc. In particular, stationary energy storage must be urgently deployed at a large-scale to support full deployment of renewables and a sustainable grid. Electrochemical energy storage systems (EESS) will be key in this pursuit. Yet, present mature technologies are all sub-optimal. A myriad of new battery chemistries are being developed in research labs, each with specific strengths and drawbacks. EESS technologies such as lithium-ion batteries, lithium–sulfur, metal–air and other post-lithium technologies, but also supercapacitors, hybrid devices and redox flow batteries (RFBs), could benefit from collaborative development between top-down systems engineering and bottom-up material science. Lithium and post-lithium systems have been extensively researched and reviewed. This perspective article examines the energy storage landscape that goes from state-of-the-art flow cells to novel flowing and stationary technologies. While there is a wide scope for improvement of first generation RFBs, a wealth of novel concepts such as ambipolar electrolytes or shuttle cells to semisolid electrodes are also emerging. This could boost the energy density of these flowing systems. In our analysis we also propose other new concepts which could eventually lead to non-flowing large-scale electrochemical energy storage., A. P. acknowledges her fellowship funded by H2020-MSCA-COFUND-2016, DOC-FAM (75439). The authors acknowledge funding from AEI (projects PID2021-128390OB-I00, TED2021-130205B-C21 and PLEC2022-009328). ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid Materials: A Metareview

  • Gómez-Romero, P.
  • Pokhriyal, Anukriti
  • Rueda-García, Daniel
  • Bengoa, Leandro N.
  • González-Gil, Rosa M.
Published as part of Chemistry of Materials virtual special issue “In Honor of Prof. Clement Sanchez”, The field of hybrid materials has grown so wildly in the last 30 years that writing a comprehensive review has turned into an impossible mission. Yet, the need for a general view of the field remains, and it would be certainly useful to draw a scientific and technological map connecting the dots of the very different subfields of hybrid materials, a map which could relate the essential common characteristics of these fascinating materials while providing an overview of the very different combinations, synthetic approaches, and final applications formulated in this field, which has become a whole world. That is why we decided to write this metareview, that is, a review of reviews that could provide an eagle’s eye view of a complex and varied landscape of materials which nevertheless share a common driving force: the power of hybridization., Funding from Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) (grant PID2021-128390OB-I00, TED2021-130205B-C21, and PLEC2022-009328) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. L.N.B. acknowledges funding from the Marie S Curie Program MSCA-PF-EF Grant number 101062498. This work has been carried out within the framework of doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autònoma de Barcelona (UAB)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polysaccharides: The Sustainable Foreground in Energy Storage Systems

  • Thomas, Sharin Maria
  • Gómez-Romero, P.
  • González-Gil, Rosa M.
Polysaccharides offer a perfect option as raw materials for the development of a new generation of sustainable batteries and supercapacitors. This is due to their abundance and inherent structural characteristics. Polysaccharides can be chemically functionalized and engineered, offering a wide range of possibilities as electrode materials (as precursors of porous nanocarbons), binders and separators. Their hierarchical morphology also enables their exploitation as aerogel and hydrogel structures for quasi-solid and solid polymer electrolytes with high conductivity and wide voltage stability windows. In this review, we discuss how different polysaccharides, such as lignocellulosic biomass, starch, chitosan, natural gums, sugars and marine polysaccharides, can be applied in different components of energy storage systems (ESSs). An overview of the recent research work adhering to each functionality of different polysaccharides in various storage systems is provided., This research was funded by Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) (grants PID2021-128390OB-I00, TED2021-130205B-C21, and PLEC2022-009328). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. The ICN2 is also funded by the CERCA programme/Generalitat de Catalunya. This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autònoma de Barcelona (UAB) and supported by the grant PRE2021-097210 from the call Ayudas para contratos predoctorales para la formación de doctores/as 2021 from the Agencia Estatal de Investigación, with the support of the Severo Ochoa Centres of Excellente programme, grant CEX2021-001214-S funded by MCIU/AEI/10.13039/501100011033 and FSE+., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quinone Quest: Unraveling electrochemical performance in quinone-anchored 3D graphene architectures for high-energy supercapacitors

  • Karaman, Ceren
  • Bengoa, Leandro N.
  • González-Gil, Rosa M.
  • Gómez-Romero, P.
In the pursuit of advancing energy storage technologies, the exploration of novel electrode materials for supercapacitors, specifically organic materials, has garnered significant attention. This work delves into the electrochemical performance of quinone-anchored three-dimensional (3D) graphene (3DG) architectures as potential electrode materials for high-energy supercapacitors, focusing on elucidating the influence of different quinone types including 1,4-naphthoquinone (NQ), anthraquinone (AQ), duraquinone (DQ), p-benzoquinone (BQ), 2,5-dimethyl-1,4-benzoquinone (DMBQ), and sodium anthraquinone-2-sulfonate (SAQS). To that end, various quinone-anchored three-dimensional graphene (Q_3DG) architectures were synthesized via a chemical reduction-induced self-assembly technique in the presence of L-ascorbic acid, a green reducing agent. The physicochemical characterizations confirmed the successful incorporation of quinones to the carbon structure, without the presence of any impurities. Different interaction mechanisms between graphene oxide (GO) and quinone molecules during the synthesis led to different surface morphologies, which affected their electrochemical behavior. The 3-electrode electrochemical characterizations in 1.0 M Na2SO4 electrolyte revealed that all Q_3DG structures exhibited superior electrochemical performance compared to GO, as well as to a Bare_3DG sample synthesized without quinone molecules. NQ anchored 3DG (NQ_3DG) network yielded the highest specific capacitance value of 386.3 F.g−1 at 10 mV.s−1, which was almost 50 times larger than that of Bare_3DG. The findings not only shed light on the fundamental mechanisms governing charge storage and transfer within these unique architectures but also provide valuable insights for the rational and green design of next-generation organic electrode-based supercapacitors with enhanced energy storage capabilities., The authors gratefully acknowledge the financial support from Scientific and Technological Research Council of Türkiye (TUBITAK) under project no 1059B192201479. Funding from Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) (grant PID2021–128390OB-I00, TED2021–130205B-C21 and PLEC2022–009328) are gratefully acknowledged. ICN2 is funded by the CERCA programme / Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021–001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Extending decavanadate cyclability through hybridization for high-energy supercapacitors

  • Pokhriyal, Anukriti
  • González-Gil, Rosa M.
  • Bengoa, Leandro N.
  • Gómez-Romero, P.
Vanadium-based polyoxometalates (POMs) or polyoxovanadates can provide high specific capacitance and energy due to their lower mass as compared to other heavier polyoxometalates. However, due to their poor cyclability, polyoxovanadates have been rarely considered for energy storage applications. Immobilizing POM nanoclusters in activated carbon (AC) matrix is a very good way to fully harness their fast electroactivity while improving their stability. In this study, hybrid electrodes made of AC supported decavanadate POM nanoclusters with high-rate capabilities and improved cyclability were synthesized. AC-sodium decavanadate was first prepared and then sodium was substituted with an organic cation (tetrabutylammonium) to synthesize AC-tetrabutylammonium decavanadate. Both materials were characterized and tested in an asymmetric configuration with an organic electrolyte. The electrodes demonstrated fast and reversible redox activity leading to an improvement in specific capacitance. The asymmetric cells showed high specific energy and power (35.5 Wh kg<sup>−1</sup> at 68 W kg<sup>−1</sup>) and 91 % capacitance retention after 5000 cycles., Funding from Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) (grant PID2021–128390OB-I00, TED2021–130205B-C21, and PLEC2022–009328) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021–001214-S, funded by MCIN/AEI/10.13039.501100011033. Anukriti Pokhriyal acknowledges the funding by H2020-MSCA-COFUND-2016, DOC-FAM, Grant Agreement No 754397. This work has been carried out within the framework of doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autònoma de Barcelona (UAB). L.N. Bengoa thanks the support provided by Horizon Europe programme through a Marie Curie Postdoctoral Fellowship (Grant 101062498-POMZAB), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of porous carbon structure through high-temperature pyrolysis for enhanced electrochemical performance of supercapacitors

  • Wang, Lipeng
  • Chen, Siyu
  • Bengoa, Leandro N.
  • González-Gil, Rosa M.
  • Gómez-Romero, P.
Herein, phosphoric acid activation followed by high-temperature pyrolysis is employed to synthesize high-performance porous carbon materials using sustainable biomass (almond shells) as the precursor. The almond shell-derived porous carbon materials exhibited a large specific surface area (1164/1395 m²/g) and high pore volume (1.39/1.40 cm³/g). After high-temperature pyrolysis at 1000°C, the biomass-derived porous carbon material AC600(1000) exhibited a larger average pore size with a hierarchical pore structure (micropores-mesopores). AC600(1000) also possessed more graphite domain structures, defects, and abundant surface oxygen-containing functional groups. In a symmetric cell configuration with 6 M KOH electrolyte, the optimized AC600(1000) operates stably over a wide voltage range (0-1.5 V), demonstrating a high specific capacitance of 142.15 F/g at 0.5 A/g. It also exhibites excellent rate performance, retaining a high specific capacitance of 106.38 F/g even at 20 A/g (74.83% capacitance retention), while the unoptimized AC600 achieved only 45.66 F/g (35.48% capacitance retention). Furthermore, it preserved 88.4% of its initial capacitance after 20,000 cycles at a current density of 5 A/g (almost 100% coulombic efficiency). This study shows proper synthetic routes that can boost significantly the performance of biomass derived carbons for supercapacitors, providing insights into structure-electrochemistry correlation. Thus, a sustainable and scalable production of carbon materials from biomass for energy storage applications is presented, which could promote the use of these materials on an industrial scale., Funding from Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigacion (AEI) and the European Regional Development Fund (FEDER) (Grant PID2021–128390OB-I00, TED2021–130205B-C21, and PLEC2022–009328) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021–001214-S, funded by MCIN/AEI/ 10.13039.501100011033. This work has been carried out within the framework of doctoral program (PhD) of Material Science at Universitat Autonoma de Barcelona (UAB) (Lipeng WANG). L.P. Wang also acknowledges his scholarship (No. 202206420015) under China Scholarship Council. L.N. Bengoa thanks the support provided by Horizon Europe programme through a Marie Curie Postdoctoral Fellowship (Grant 101062498-POMZAB). Authors want to thank ICN2 and ICMAB core facilities., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructural design of biomass-derived porous carbons for advanced supercapacitors

  • Wang, Lipeng
  • Xu, Tianqi
  • Bengoa, Leandro N.
  • González-Gil, Rosa M.
  • Chen, Siyu
  • Yang, Jianguo
  • Yao, Zongxu
  • Dong, Liang
  • Gómez-Romero, P.
Almond shell, a representative lignocellulosic biomass, is employed as a precursor to fabricate porous carbons with tunable local graphitic nanocrystalline domains and hierarchical porosity via H<inf>2</inf>SO<inf>4</inf> pretreatment followed by H<inf>3</inf>PO<inf>4</inf> activation and high-temperature pyrolysis. Comprehensive structural analyses reveal 6 M H<inf>2</inf>SO<inf>4</inf> pretreatment leads to lignin enrichment and promotes locally ordered graphitic domains, while constructing a mesopore-dominated network with a specific surface area of 1180 m<sup>2</sup> g<sup>−1</sup> and mesopore fraction of 97.7%. In contrast, excessive acid pretreatment at 12 M shifts the pore structure toward smaller pores and introduces more oxygen-containing groups. In 6 M KOH aqueous electrolyte, a symmetric supercapacitor based on the best performing material AC6-600(1000) delivers high specific capacitance of 152.9 F g<sup>−1</sup> at 1 A g<sup>−1</sup>, retaining 83.2% of that capacitance at 20 A g<sup>−1</sup>. It also maintains 81.1% of its initial capacitance after 100000 cycles at 10 A g<sup>−1</sup>. A flexible, free-standing, high-mass-loading electrode (∼14.3 mg cm<sup>−2</sup>) fabricated from AC6-600(1000) achieves areal capacitance of 1715.2 mF cm<sup>−2</sup>, areal energy density of 228.7 μWh cm<sup>−2</sup>, further confirm the excellent rate capability of AC6-600(1000). Density functional theory (DFT) calculations show locally ordered carbon surfaces exhibit stronger adsorption toward K<sup>+</sup> ions, establishing a correlation between nanocrystalline order and interfacial charge storage. This work proposes a “nanocrystalline–pore co-design” strategy for biomass-derived carbons into advanced device performance in supercapacitors., This work was supported by the Ministerio de Ciencia e Innovación y Universidades (MICIU), through Agencia Estatal de Investigacion (AEI) and the European Regional Development Fund (FEDER) (PID2024-157199OB-C21), Also NextGenerationEU/PRTR (PLEC2022-009328) and the Jiangsu Key Laboratory for Clean Utilization of Carbon Resources Research Project (BM2024007) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. This work has been carried out within the framework of doctoral program (PhD) of Material Science at Universitat Autonoma de Barcelona (UAB) by Lipeng Wang, who also acknowledges the award of a CSC fellowship (No. 202206420015) under China Scholarship Council. Authors want to thank ICN2 core facilities., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid Materials, A Metareview

  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Pokhriyal, Anukriti
  • Rueda García, Daniel|||0000-0003-3539-1585
  • Bengoa, Leandro N.|||0000-0002-0608-8248
  • González-Gil, Rosa M.
The field of hybrid materials has grown so wildly in the last 30 years that writing a comprehensive review has turned into an impossible mission. Yet, the need for a general view of the field remains, and it would be certainly useful to draw a scientific and technological map connecting the dots of the very different subfields of hybrid materials, a map which could relate the essential common characteristics of these fascinating materials while providing an overview of the very different combinations, synthetic approaches, and final applications formulated in this field, which has become a whole world. That is why we decided to write this metareview, that is, a review of reviews that could provide an eagle's eye view of a complex and varied landscape of materials which nevertheless share a common driving force: the power of hybridization.