Pasar al contenido principal

MATERIALES SUPERCONDUCTORES DE REBA2CU3O7-X Y FUNCIONALIDADES PARA DISPOSITIVOS TECNOLOGICOS

RTI2018-095853-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gomez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia-Bermejo, Ricardo
  • Oró-Solé, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gazquez, Jaume
  • Rodriguez-Carvajal, Juan
  • Carretero-Genevrier, Adrián
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-Terminal Transistor-Like Devices Based on Strongly Correlated Metallic Oxides for Neuromorphic Applications

  • Fernández Rodríguez, Alejandro
  • Alcalà, Jordi
  • Suñé, Jordi
  • Mestres, Narcís
  • Palau, Anna
Memristive devices are attracting a great attention for memory, logic, neural networks, and sensing applications due to their simple structure, high density integration, low-power consumption, and fast operation. In particular, multi-terminal structures controlled by active gates, able to process and manipulate information in parallel, would certainly provide novel concepts for neuromorphic systems. In this way, transistor-based synaptic devices may be designed, where the synaptic weight in the postsynaptic membrane is encoded in a source-drain channel and modified by presynaptic terminals (gates). In this work, we show the potential of reversible field-induced metal-insulator transition (MIT) in strongly correlated metallic oxides for the design of robust and flexible multi-terminal memristive transistor-like devices. We have studied different structures patterned on YBa2Cu3O7−δ films, which are able to display gate modulable non-volatile volume MIT, driven by field-induced oxygen diffusion within the system. The key advantage of these materials is the possibility to homogeneously tune the oxygen diffusion not only in a confined filament or interface, as observed in widely explored binary and complex oxides, but also in the whole material volume. Another important advantage of correlated oxides with respect to devices based on conducting filaments is the significant reduction of cycle-to-cycle and device-to-device variations. In this work, we show several device configurations in which the lateral conduction between a drain-source channel (synaptic weight) is effectively controlled by active gate-tunable volume resistance changes, thus providing the basis for the design of robust and flexible transistor-based artificial synapses., This research was founded by the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), SUPERSWITCH project (FUNMAT-FIP-2017), COACHSUPENERGY (MAT2014-51778-C2-1-R), and SuMaTe (RTI2018-095853-B-C21) projects, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE. We also thank support from the European Union for NanoSC Cost Action NANOCOHYBRI (CA 16218) and from the Catalan Government with 2017-SGR-1519. A.F.-R thanks the Spanish Ministry of Economy for the FPI Spanish grant (BES-2016-077310). J.S. was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades and the ECSEL EU Joint Undertaking through the WAKeMeUP 783176 Project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast transient liquid assisted growth of high current density superconducting films

  • Soler, Laia
  • Jareño Cerulla, Julia
  • Banchewski, Juri
  • Rasi, Silvia
  • Chamorro, Natalia
  • Guzmán, Roger
  • Yáñez, Ramón
  • Mocuta, Cristian
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Obradors, Xavier
  • Puig Molina, Teresa
The achievement of high growth rates in YBa2Cu3O7 epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s−1) and high critical current densities (5 MA cm−2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process., Authors acknowledge EU for ULTRASUPERTAPE ERC-2014-ADG-669504; COACHSUPENERGY MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R from MINECO; SuMaTe RTI2018-095853-B-C21 and RTI2018-095853-B-C22 from MICINN and co-financing by the European Regional Development Fund; 2017-SGR 1519 from Generalitat de Catalunya; and EU COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors thank Dr. Cornelia Pop, Dr. Bohores Villarejo, Dr. Bernat Mundet, and Dr Anna Palau for contributions at the initial stages of the project. We thank Diana García, Lavinia Saltarelli, Adria Pacheco, Dr. Max Sieger, and Dr. Albert Queralto for help in the feasibility study and preliminary results on thick films and coated conductors. Authors acknowledge support from SuNAM Co Ltd. for providing the buffered metallic substrates for the initial tests on coated conductors. We also acknowledge the Scientific Services at ICMAB, ICTS of IMB-CNM-CSIC, ICN2 Electron Microscopy Division and LMA-INA from Aragon, and SOLEIL Synchrotron for granting beamtime for XRD experiments and the DiffAbs beamline personnel for help. L.S. and J.J. also acknowledge their FPU-MINECO PhD grant, S.R. and N.C. thank University of Girona and Generalitat de Catalunya fort their PhD FI grant, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suppression of superconductivity at the nanoscale in chemical solution derived YBa2Cu3O7−δ thin films with defective Y2Ba4Cu8O16 intergrowths

  • Li, Ziliang
  • Coll, Mariona
  • Mundet, Bernat
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
The analysis of the microstructure and superconducting behavior of chemical solution deposited epitaxial YBa2Cu3O7-δ films, with thickness going down to 5 nm has been carried out with the purpose to disclose the behavior of the most common intergrowth in these films, the Y2Ba4Cu8O16. The analysis of ultrathin films is a unique opportunity to investigate the superconducting behavior of these nanoscale defects because of the high concentration created as a consequence of the elastic energy associated to the misfit strain. Magnetic susceptibility and X-ray diffraction measurements evidence a strong decrease of the superconducting volume correlated with an increase of the intergrowth volume fraction. We demonstrate that these intergrowths are non-superconducting nanoscale regions where Cooper pair formation is disrupted, in agreement with their key role as artificial pinning centers for vortices in YBa2Cu3O7-δ films and coated conductors., All authors acknowledge the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project and ULTRASUPERTAPE ERC-2014-ADG-669504), MINECO (COACHSUPENERGY, MAT2014-51778-C2-1-R and SuMaTe RTI2018-095853-B-C21), COST Action NANOCOHYBRI (CA16218) and Generalitat de Catalunya (2017SGR 1519). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors acknowledge the Scientific Services at ICMAB, the ICN2 Electron Microscopy Division and LMA-INA for offering access to their instruments and expertise. M.C. also acknowledge the Ramon y Cajal program (RYC-2013-12448). Z.L. acknowledges the China Scholarship Council (CSC) and B.M. the Spanish Ministry for his PhD grant (BES-2015- 072749f)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pyrolysis study of solution-derived superconducting YBa2Cu3O7 films: disentangling the physico-chemical transformations

  • Villarejo, Bohores
  • Pop, Cornelia
  • Ricart, Susagna
  • Mundet, Bernat
  • Palau, Anna
  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
Chemical solution deposition (CSD) of epitaxial YBa2Cu3O7 (YBCO) films is a high throughput, cost-effective approach to grow high critical current superconducting conductors for power applications. Achieving high critical currents requires to grow epitaxial films with large thicknesses and this is still an open issue in CSD. Metalorganic precursor solution deposition can be tailored to achieve high film thicknesses, however, the pyrolysis step may heavily compromise the film quality due to the in-plane stress generated by a strong film shrinkage. Here, we disclose the complex relationship existing during the pyrolysis process between the physico-chemical transformations and the microstructure of the films. A low-fluorine trifluoroacetate (TFA) and propionate(prop), route to YBCO films with a final thicknesses in the range of 700 – 800 nm was studied to understand the phenomena. Morphological analysis by in-situ optical microscopy video imaging under specific heating rates allowed to identify the thermokinetic conditions leading to permanent or reversible wrinkling and crack formation. The origin of the microstructural transformations during the pyrolysis of thick films has been disentangled through parallel in-situ analyses of the chemical, thermal and mechanical properties, together with film thickness measurements. A key finding has been the identification of an intermediate liquid phase relieving the compressive stress responsible of wrinkling. Disclosing the origin of the physico - chemical transformations opens the path towards defining optimized pyrolysis processing conditions for high quality single deposition of CSD films., Authors acknowledge the EUROTAPES project (EU-FP7 NMP-LA2012-280432), COACHSUPENERGY (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R) and SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22) from MINECO (co-financed by the European Regional Development Fund), 2017-SGR 753 from Generalitat de Catalunya, and COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors acknowledge the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. We thank CNM-IMB for the use of their FIB services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Visualization of Current-Stimulated Oxygen Migration in YBa2Cu3O7−δ Thin Films

  • Marinković, Stefan
  • Fernández Rodríguez, Alejandro
  • Collienne, Simon
  • Blanco Alvarez, Sylvain
  • Melinte, Sorin
  • Maiorov, Boris
  • Rius, Gemma
  • Granados, Xavier
  • Mestres, Narcís
  • Palau, Anna
  • Silhanek, Alejandro V.
The past years have witnessed major advancements in all-electrical doping control on cuprates. In the vast majority of cases, the tuning of charge carrier density has been achieved via electric field effect by means of either a ferroelectric polarization or using a dielectric or electrolyte gating. Unfortunately, these approaches are constrained to rather thin superconducting layers and require large electric fields in order to ensure sizable carrier modulations. In this work, we focus on the investigation of oxygen doping in an extended region through current-stimulated oxygen migration in YBa2Cu3O7−δ superconducting bridges. The underlying methodology is rather simple and avoids sophisticated nanofabrication process steps and complex electronics. A patterned multiterminal transport bridge configuration allows us to electrically assess the directional counterflow of oxygen atoms and vacancies. Importantly, the emerging propagating front of current-dependent doping δ is probed in situ by optical microscopy and scanning electron microscopy. The resulting imaging techniques, together with photoinduced conductivity and Raman scattering investigations, reveal an inhomogeneous oxygen vacancy distribution with a controllable propagation speed permitting us to estimate the oxygen diffusivity. These findings provide direct evidence that the microscopic mechanism at play in electrical doping of cuprates involves diffusion of oxygen atoms with the applied current. The resulting fine control of the oxygen content would permit a systematic study of complex phase diagrams and the design of electrically addressable devices., The authors acknowledge the financial support from the Fonds de la Recherche ScientifiqueFNRS, Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015- 0496), SUMATE project (RTI2018-095853-B-C21), cofinanced by the European Regional Development Fund, the COST programme NanoCoHybri (CA 16218), and from the Catalan Government with 2017 SGR 1519. The work of A. Fernańdez-Rodriǵuez has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona (UAB) and is supported by the Spanish Ministry of Economy (BES-2016-077310). The work of A. V. Silhanek is partially supported by the grant CDR J.0151.19 of the F.R.S.- FNRS. S. Blanco Alvarez, S. Melinte, and A. V. Silhanek acknowledge financial support through the grant PDR T.0106.16 of the F.R.S.-FNRS. S. Marinković acknowledges support from F.R.S.-FNRS (Research Fellowship ASP). B. Maiorov was supported by the U.S. DOE, Office of Science, BES, Materials Sciences and Engineering Division. The authors thank the ULiege Microscopy facility CAREM for the SEM investigations. G. Rius acknowledges the Ramon y Cajal grant RYC-2016-21412., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous Chemical Solution Deposition of Functional Double Perovskite Epitaxial Thin Films

  • Wang, Hailin
  • Frontera, Carlos
  • Herrero Martín, Javier
  • Pomar, Alberto
  • Pere Roura,[
  • Martínez Perea, Benjamín
  • Mestres, Narcís
Double perovskite structure (A2BB′O6) oxides exhibit a breadth of multifunctional properties with a huge potential range of applications in fields as diverse as spintronics, magneto‐optic devices, or catalysis, and most of these applications require the use of thin films and heterostructures. Chemical solution deposition techniques are appearing as a very promising methodology to achieve epitaxial oxide thin films combining high performance with high throughput and low cost. In addition, the physical properties of these materials are strongly dependent on the ordered arrangement of cations in the double perovskite structure. Thus, promoting spontaneous cationic ordering has become a relevant issue. In this work, our recent achievements by using polymer‐assisted deposition (PAD) of environmentally friendly, water‐based solutions for the growth of epitaxial ferromagnetic insulating double perovskite La2CoMnO6 and La2NiMnO6 thin films on SrTiO3 and LaAlO3 single‐crystal substrates are presented. It is shown that the particular crystallization and growth process conditions of PAD (very slow rate, close to thermodynamic equilibrium conditions) promote high crystallinity and quality of the films, as well as favors spontaneous B‐site cationic ordering., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa (SEV‐2015–04969), SUMATE (RTI2018‐095853‐B‐C21), and SPINCURIOX (RTI2018‐099960‐B‐I00) projects co‐financed by the European Regional Development Fund. Hailin Wang acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship. The authors thank the ALBA Synchrotron (Spain) for the provision of beamtime. The authors also thank Dr. B. Bozzo and F. J. Campos for their technical support during magnetic and X‐ray diffraction measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Embedded Magnetism in YBa2Cu3O7 Associated with Cu–O Vacancies within Nanoscale Intergrowths: Implications for Superconducting Current Performance

  • Bartolomé, Elena
  • Mundet, Bernat
  • Guzmán, Roger
  • Gázquez, Jaume
  • Valvidares, Manuel
  • Herrero Martín, Javier
  • Pellegrin, Eric
  • Puig Molina, Teresa
  • Obradors, Xavier
Stacking faults are ubiquitous structural defects in YBa2Cu3O7 high-Tc superconductors. Far from being detrimental, the control of the defect landscape, i.e., the length, density, and distribution of YBa2Cu4Oy (Y124) intergrowths, changing the nanostrain of the material can be used to enhance the vortex pinning properties of the superconductor, as required for applications. Recently, the use of advanced scanning transmission electronic microscopy has unveiled the presence of complex point nanodefects (clusters of Cu and O vacancies) within Y124, with an associated magnetic moment predicted by density functional calculations. In this work, we investigate the nature of defect-driven embedded magnetism in YBCO samples (thin films, nanocomposites, and a single crystal) containing different distributions of Y124 intergrowths using X-ray magnetic circular dichroism (XMCD), combined with scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS). The dichroic Cu signal correlates with the density of Y124 intergrowths, demonstrating the defect-driven origin of the embedded magnetism. Remarkably, a Cu XMCD signal is observed even in the single crystal, associated with the small presence of defects at the surface. Our work thus demonstrates the ubiquity of embedded magnetism in YBCO associated with faulted Y124 defects., We thank G. Nieva from Centro Atómico de Bariloche for YBCO single-crystal supply, and S. Hartman and R. Mishra from Oak Ridge National Laboratory for discussions on DFT simulations. We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant SEV-2015-0496), COACHSUPERENERGY (Grant MAT2014-51778-C2-1-R), SUMATE Project RTI2018-095853-B-C21, co-financed by the European Regional Development Fund, COST-Nanohybri CA16218, DWARFS project (Grant MAT2017-83468-R) and Catalan Government with Grant 2017-SGR-1519. The XMCD experiments were performed at the BOREAS beamline of the ALBA Synchrotron Light Facility with the collaboration of ALBA staff. The STEM microscopy work was conducted in “Laboratorio de Microscopias Avanzadas” at the Instituto de Nanociencia de Aragon-Universidad de Zaragoza. We acknowledge the LMA-INA for offering access to their instruments and expertise. STEM-EELS analysis was conducted at the Center for Nanophase Materials Sciences, which is a DOE Office of Science User Facility. J.G. also acknowledges the Ramón y Cajal program (Grant RYC-2012-11709)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic Anisotropy and Pinning Anisotropy in Nanostructured YBa2Cu3O7􀀀 from Microwave Measurements

  • Pompeo, N.
  • Alimenti, A.
  • Torokhtii, K.
  • Bartolomé, Elena
  • Palau, Anna
  • Puig Molina, Teresa
  • Augieri, A.
  • Galluzzi, V.
  • Mancini, A.
  • Celentano, Giuseppe
  • Obradors, Xavier
  • Silva, E.
Anisotropy is an intrinsic factor that dictates the magnetic properties of YBa2Cu3O7−δ and therefore has a great impact on many applications. Artificial pinning centres are often introduced in an attempt to mitigate its effect, resulting in less anisotropic electrical and magnetic properties. However, the nanoengineering of superconductors makes the quantification of the anisotropy itself uncertain: the intrinsic anisotropy due to the layered structure, quantified by the anisotropy factor γ, mixes with the additional anisotropy due to pinning. As a consequence, there is no consensus on the experimental anisotropy factor γ that can result in YBa2Cu3O7−δ when directional (twin planes, nanorods) or isotropic defects are present. We present measurements of the magnetic field and angular dependent surface impedance in very different nanostructured YBa2Cu3O7−δ films, grown by a chemical route and by pulsed laser deposition with different kind of defects (nanorods, twin planes, nanoparticles). We show that the surface impedance measurements are able to disentangle the intrinsic anisotropy from the directional pinning anisotropy, thanks to the possibility of extracting the true anisotropic flux–flow resistivity and by correctly exploiting the angular scaling. We find in all films that the intrinsic anisotropy γ = 5.3 ± 0.7. By contrast, the pinning anisotropy determines a much more complex, feature– rich and nonuniversal, sample–dependent angular landscape., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014-2018 and 2019-2020 under grant agreement No 633 053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We thank Benedetta Belli and Raffaella Rogai for help in data acquisition. We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), SUMATE project RTI2018-095853-B-C21, co-financed by the European Regional Development Fund, COST-Nanohybri CA16218, DWARFS project (MAT2017-83468-R) and Catalan Government with 2017-SGR-1519 and XRE4S.This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014-2018 and 2019-2020 under grant agreement No 633 053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We thank Benedetta Belli and Raffaella Rogai for help in data acquisition. We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), SUMATE project RTI2018-095853-B-C21, co-financed by the European Regional Development Fund, COST-Nanohybri CA16218, DWARFS project (MAT2017-83468-R) and Catalan Government with 2017-SGR-1519 and XRE4S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vortex pinning properties at dc and microwave frequencies of YBa2Cu3O7-x films with nanorods and nanoparticles

  • Bartolomé, Elena
  • Alcalà, Jordi
  • Vallés, Ferran
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Pompeo, N.
  • Alimenti, A.
  • Torokhtii, K.
  • Rizzo, Francesca
  • Augieri, A.
  • Celentano, Giuseppe
  • Silva, E.
  • Palau, Anna
YBa2Cu3O7−x (YBCO) nanocomposites for wire applications need to operate in a broad range of frequencies, ranging from dc in magnets to GHz in cavities and screenings of future particle accelerators. We have investigated the in-field and angular vortex pinning performance in dc and at 50 GHz of two types of nanocomposites, pulsed laser deposition (PLD) YBCO with mixed Ba2YNbO6 + Ba2YTaO6 (BYNTO) nanorods and chemical solution deposited (CSD) YBCO with BaHfO3 (BHO) nanoparticles (NPs), and the pristine counterpart films, grown on top of single-crystalline substrates. Transport measurements performed up to 9 T between 5 and 77 K show that CSD nanocomposites exhibit a smooth field decay and increased single-to-collective crossover field H* compared to pristine samples, associated to the enhanced isotropic pinning contribution induced by the NPs, while PLD films exhibit unchanged H* and superior critical current densities up to higher irreversibility fields, associated to the anisotropic contribution introduced by the rods. Microwave in-field measurements of the pinning constant kp revealed CSD NCs exhibit a qualitatively similar, but smoother kp(H) than pristine samples, whereas for PLD samples, a growing kp(H) dependence is observed as a result of the increased relevance of the stiffness of the fluxons pinned by nanorods., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), SUMATE project RTI2018-095853-B-C21, cofinanced by the European Regional Development Fund, COST-Nanocohybri CA16218, DWARFS project (MAT2017-83468-R) and Catalan Government with 2017-SGR-1519 and XRE4S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of thermal analysis and kinetic predictions to YBCO flms prepared by chemical solution deposition methods

  • Rasi, Silvia
  • Roura Grabulosa, Pere
  • Farjas, Jordi
Fluorine‐based chemical solution deposition routes to prepare YBa2Cu3O7‐∂ films were characterized with the aid of thermal analysis techniques. Thermogravimetric analysis and X‐ray diffraction were applied to characterize the main steps of the fluorine‐based route: pyrolysis of the organic material and growth of the oxide. The difference between the thermal behaviour of films and powders in fluorine‐based chemical solution deposition route is reiterated to justify the importance of the study of films. Finally, the kinetic analysis is used to predict the mass evolution of the pyrolysis for an arbitrary temperature program with the aim to optimize this treatment to minimize film porosity and crack formation., This work was funded by Ministerio de Ciencia, Innovación y Universidades (grant number RTI2018‐ 095853‐B‐C21); it was also supported by the Generalitat de Catalunya (2017‐SGR‐1519) and the Universitat de Girona (UdG, contract number MPCUdG2016/059)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid Thermal Annealing of Double Perovskite Thin Films Formed by Polymer Assisted Deposition

  • Wang, Hailin
  • Frontera, Carlos
  • Martínez Perea, Benjamín
  • Mestres, Narcís
The annealing process is an important step common to epitaxial films prepared by chemical solution deposition methods. It is so because the final microstructure of the films can be severely affected by the precise features of the thermal processing. In this work we analyze the structural and magnetic properties of double perovskite La2CoMnO6 and La2NiMnO6 epitaxial thin films prepared by polymer-assisted deposition (PAD) and crystallized by rapid thermal annealing (RTA). It is found that samples prepared by RTA have similar values of saturation magnetization and Curie temperature to their counterparts prepared by using conventional thermal annealing (CTA) processes, thus indicating low influence of the heating rates on the B-B’ site cationic ordering of the A2BB’O6 double perovskite structure. However, a deeper analysis of the magnetic behavior suggested some differences in the actual microstructure of the films., This research was founded by the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa (SEV-2015–04969) and Severo Ochoa FUNFUTURE (CEX2019-000917-S), SUMATE (RTI2018-095853-B-C21), and SPIN-CURIOX (RTI2018-099960- B-100) projects co-financed by the European Regional Development Fund. Hailin Wang acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale Correlations between Metal–Insulator Transition and Resistive Switching Effect in Metallic Perovskite Oxides

  • Gonzalez Rosillo, Juan Carlos
  • Catalano, Sara
  • Maggio-Aprile, Ivan
  • Gibert, Marta
  • Obradors, Xavier
  • Palau, Anna
  • Puig Molina, Teresa
Strongly correlated perovskite oxides are a class of materials with fascinating intrinsic physical functionalities due to the interplay of charge, spin, orbital ordering, and lattice degrees of freedom. Among the exotic phenomena arising from such an interplay, metal–insulator transitions (MITs) are fundamentally still not fully understood and are of large interest for novel nanoelectronics applications, such as resistive switching‐based memories and neuromorphic computing devices. In particular, rare‐earth nickelates and lanthanum strontium manganites are archetypical examples of bandwidth‐controlled and band‐filling‐controlled MIT, respectively, which are used in this work as a playground to correlate the switching characteristics of the oxides and their MIT properties by means of local probe techniques in a systematic manner. These findings suggest that an electric‐field‐induced MIT can be triggered in these strongly correlated systems upon generation of oxygen vacancies and establish that lower operational voltages and larger resistance ratios are obtained in those films where the MIT lies closer to room temperature. This work demonstrates the potential of using MITs in the next generation of nanoelectronics devices., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant no. SEV‐2015‐0496), CONSOLIDER Excellence Network (Grant no. MAT2015‐68994‐REDC), COACHSUPENERGY project (Grant no. MAT2014‐56063‐C2‐1‐R, and SuMaTe RTI2018‐095853‐B‐C21, cofinanced by the European Regional Development Fund), OXSWITCH project funded by Centro Superior de Investigaciones Científicas (CSIC), and from the Catalan Government with Grant no. 2017‐SGR‐1519. Authors also thank the network collaboration of EU COST action NANOCOHYBRI CA16218. J.C.G.‐R. thanks Spanish Ministry of Economy for his FPI Spanish grant (Grant no. BES‐2012‐053814). The authors also acknowledge the Scientific Services at ICMAB, specially A. Gómez from the atomic force microscopy service., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relevance of the Formation of Intermediate Non-Equilibrium Phases in YBa2Cu3O7-x Film Growth by Transient Liquid-Assisted Growth

  • Rasi, Silvia
  • Soler, Laia
  • Jareño Cerulla, Julia
  • Banchewski, Juri
  • Guzmán, Roger
  • Mocuta, Cristian
  • Kreuzer, Martin
  • Ricart, Susagna
  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid-assisted growth (TLAG) is a non-equilibrium ultrafast method to grow YBa2Cu3O7–x (YBCO) superconducting films at up to 100 nm/s using chemical solution deposition. In this work, we study the formation of non-equilibrium crystalline intermediate phases prior to the growth of YBCO through TLAG. We analyze the thermal decomposition and microstructural evolution of a propionate-based fluorine-free solution used as precursor to YBCO epitaxial films. Thermal analyses (TGA, DSC), coupled with techniques to monitor the volatiles (TG-IR), were applied in situ during film pyrolysis in humid O2, while the thermal evolution of the solid residue was characterized by infrared spectroscopy and X-ray diffraction, both ex situ and in situ in synchrotron radiation sources, and by scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) cross-sectional analysis. Unexpected effects, observed during the decomposition of the ternary solution, are the formation of intermediate non-equilibrium phases: Cu2O or Cu(0) and monoclinic BaCO3. We emphasize that working with anhydrous solutions and anhydrous deposition conditions promotes the formation of the expected equilibrium phases. Finally, in situ X-ray diffraction permits monitoring the influence of the non-equilibrium monoclinic BaCO3 phase on the formation of binary oxide phases, precursors of TLAG YBCO film growth. Understanding the evolution of non-equilibrium phases is shown to be fundamental for the control of the final YBCO film’s microstructure and performance, since the latter are strongly affected by the film’s thermal history after solution deposition., This work was funded by Ministerio de Ciencia, Innovation y Universidades (RTI2018-095853-B-C21 and RTI2018-095853-B-C22) cofinanced by the European Regional Development Fund, and the EU Ultrasupertape project (ERC ADG-2014-669504). We also acknowledge the Center of Excellence Severo Ochoa (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-1519) and the COST -action NANOCOHYBRI (CA16218). In situ FTIR experiments were performed at the MIRAS beamline of the ALBA Synchrotron with the collaboration of ALBA staff. We also thank the DiffAbs beamline at SOLEIL Synchrotron facility and the beamline staff support for the in situ XRD experiments. We thank the ICMAB, INA-Zaragoza and UdG scientific services and technical staff for the support on the experiments. S.R. thanks the Universitat de Girona (UdG) for the IFUdG grant. L.S. and J.J. also acknowledge their FPU-MINECO PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combinatorial Screening of Cuprate Superconductors by Drop-On-Demand Inkjet Printing

  • Queraltó, Albert
  • Banchewski, Juri
  • Pacheco, Adrià
  • Gupta, Kapil
  • Saltarelli, Lavinia
  • García Franco, Diana
  • Alcalde, Núria
  • Cristian Mocuta,
  • Ricart, Susagna
  • Pino, Flavio
  • Obradors, Xavier
  • Puig Molina, Teresa
Combinatorial and high-throughput experimentation (HTE) is achieving more relevance in material design, representing a turning point in the process of accelerated discovery, development, and optimization of materials based on data-driven approaches. The versatility of drop-on-demand inkjet printing (IJP) allows performing combinatorial studies through fabrication of compositionally graded materials with high spatial precision, here by mixing superconducting REBCO precursor solutions with different rare earth (RE) elements. The homogeneity of combinatorial Y1−xGdxBa2Cu3O7 samples was designed with computational methods and confirmed by energy-dispersive Xray spectroscopy (EDX) and high-resolution X-ray diffraction (XRD). We reveal the advantages of this strategy in the optimization of the epitaxial growth of high-temperature REBCO superconducting films using the novel transient liquid-assisted growth method (TLAG). Advanced characterization methods, such as in situ synchrotron growth experiments, are tailored to suit the combinatorial approach and demonstrated to be essential for HTE schemes. The experimental strategy presented is key for the attainment of large datasets for the implementation of machine learning backed material design frameworks., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504) and EU COST action for CA16218 (NANOCOHYBRI). We also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, and Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), SUMATE project (RTI2018-095853-B-C21, co-financed by the European Regional Development Fund). Synchrotron SOLEIL is acknowledged for granting the beamtime (under project no. 20190274) and P. Joly for setup assistance at the DiffAbs beamline. We also acknowledge support from the Catalan Government with 2017-SGR-1519 and the energy Catalan network E4S. A.Q. thanks the Spanish Ministry of Science, Innovation and Universities for his “Juan de la Cierva” postdoctoral fellowship (Grant no. IJC2018-035034-I). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Fluorine Ba-Deficient Solutions for High-Performance Superconducting YBCO Films

  • Ternero, Pau
  • Alcalà, Jordi
  • Piperno, Laura
  • Pop, Cornelia
  • Ricart, Susagna
  • Mestres, Narcís
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Sotgiu, Giovanni
  • Celentano, Giuseppe
  • Palau, Anna
High-performing superconducting YBa2Cu3O7–x (YBCO) films are fabricated by a chemical solution deposition methodology through novel barium-deficient low-fluorine solutions. The precursor solutions, distinguished for being straightforward, inexpensive and eco-friendly, allow us to reduce the growing temperature of YBCO down to 750 °C. We investigated the influence of the growing temperatures on both the microstructure and superconducting properties of YBCO films by using conventional thermal annealing and flash-heating approaches. A clear correlation between the growing temperature (Tg) and the superconducting performance of the films was obtained with improved performances observed at low Tg., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496, FUNFUTURE CEX2019-000917-S), SUMATE project RTI2018-095853-B-C21, cofinanced by the European Regional Development Fund, COST-Nanocohybri CA16218 and Catalan Government with 2017-SGR-1519 and XRE4S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-high critical current densities of superconducting YBa2Cu3O7-δ thin films in the overdoped state

  • Stangl, Alexander
  • Palau, Anna
  • Deutscher, Guy
  • Obradors, Xavier
  • Puig Molina, Teresa
The functional properties of cuprates are strongly determined by the doping state and carrier density. We present an oxygen doping study of YBa2Cu3O7-δ (YBCO) thin films from underdoped to overdoped state, correlating the measured charge carrier density, nH, the hole doping, p, and the critical current density, Jc. Our results show experimental demonstration of strong increase of Jc with nH, up to Quantum Critical Point (QCP), due to an increase of the superconducting condensation energy. The ultra-high Jc achieved, 90 MA cm−2 at 5 K corresponds to about a fifth of the depairing current, i.e. a value among the highest ever reported in YBCO films. The overdoped regime is confirmed by a sudden increase of nH, associated to the reconstruction of the Fermi-surface at the QCP. Overdoping YBCO opens a promising route to extend the current carrying capabilities of rare-earth barium copper oxide (REBCO) coated conductors for applications., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496), the EU ULTRASUPERTAPE (ERC-2014-ADG-669504) and EUROTAPES project (FP7-NMP-Large-2011-280432), and the Spanish CONSOLIDER Excellence Network (Grant No. MAT2015-68994-REDC), COACHSUPENERGY project (Grant No. MAT2014-56063-C2-1-R) and SuMaTe project (RTI2018-095853-B-C21), both cofinanced by the European Regional Development Fund, and from the Catalan Government with Grant No. 2014-SGR-753 and 2017-SGR-1519. Authors also thank the network collaboration of EU COST action NANOCOHYBRI CA16218.We also acknowledge the Scientific Services at ICMAB. We thank Juri Banchewski for some of the last transport experiments. A.S. is grateful for illuminating discussions on the manuscript with Stephan Steinhauer (KTH, Sweden)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gómez Rodríguez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia Bermejo, Ricardo
  • Oró, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gázquez, Jaume
  • Rodriguez Carvajal, Juan
  • Carretero Genevrier, Adrian
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices., A. C.-G., C. J., R. G.-B. and J. M. V.-F. acknowledge the financial support from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (No. 803004) and the French Agence Nationale de la Recherche (ANR), project Q-NOSS ANR ANR-16-CE09-0006-01. This project has received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3, the Spanish Ministry of Economy and Competitivity through Project MAT2017-82970-C2-2-R, and the Aragon Regional Government through Project No. E13_20R (with European Social Fund). We acknowledge SOLEIL for provision of synchrotron radiation facilities, and we would like to thank Pierre Fertey for assistance in using beamline Cristal. J. G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The authors thank D. Montero for providing the FEGSEM images. N. M. acknowledges the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa FUNFUTURE (CEX2019-000917-S) and SUMATE (RTI2018-095853-B-C21) projects, co-financed by the European Regional Development Fund. The FEGSEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (IMPC FR2482). The authors thank Frederic Pichot for his expertise and advice during the nanowire lithographic process. The STEM microscopy work was conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of the nonlinear surface resistance of REBCO coated conductors for their use in the FCC-hh beam screen

  • Krkotić, Patrick
  • Romanov, Artur
  • Tagdulang, Nikki
  • Telles, Guilherme
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre
  • Granados, Xavier
  • Calatroni, Sergio
  • Pérez, Francis
  • Pont Montaner, Montserrat
  • O'Callaghan, Juan Manuel
To assess the feasibility of using high-temperature superconductors for the beam screens of future circular colliders, we have undertaken a study of the power dependence of the microwave surface resistance in state-of-the-art REBCO coated conductors at about 8 GHz and 50 K. We have employed a dielectric resonator to produce radio-frequency (RF) electromagnetic fields on the surface of the coated conductors having amplitudes similar to those generated by proton bunches circulating in the vacuum chamber of the proposed future circular collider Hadron-Hadron (FCC-hh) at CERN We show that surface resistances in REBCO coated conductors without artificial pinning centers are more affected by a RF magnetic field than those containing nano-inclusions. Despite that, at 8 GHz, 50 K, and 9 T, most REBCO coated conductors studied outperform copper in terms of surface resistance, with the best sample having a 2.3 mΩ surface resistance while being subject to an RF field 2.5 times stronger than that in the FCC-hh. We also extrapolate the measured data to 16 T and 1 GHz, the actual FCC-hh dipole magnetic field, and the mid-beam frequency spectrum, demonstrating the possibility of lowering the surface resistance of the vacuum chamber by up to two orders of magnitude compared to copper. Further, we discuss the correlation between the time structure of the electromagnetic fields provided by vector network analyzers compared to the proton bunches' time structure in the collider and present the effect of low alternating magnetic fields on vortex displacement and the possibility of demagnetization of superconducting samples., The authors acknowledge the support and samples provided by Bruker HTS GmbH, Fujikura Ltd, SuNAM CO Ltd SuperOx, SuperPower Inc. and Theva Dünnschichttechnik GmbH. This work was supported by CERN under Grant Nos. FCC-GOV-CC-0072/KE3358, FCC-GOV-CC-0153/KE4106 and FCC-GOV-CC-0208/KE4947/ATS. UPC funding was also provided through the Unit of Excellence María de Maeztu MDM2016-0600. N Tagdulang and A Romanov acknowledge MSCA-COFUND-2016-754397 for the PhD Grant. ICMAB authors acknowledge RTI2018-095853-B-C21 SuMaTe from MICINN and co-financing by the European Regional Development Fund; 2017-SGR 1519 from Generalitat de Catalunya and COST Action NANOCO-HYBRI (CA16218) from EU, the Center of Excellence award Severo Ochoa CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin Film (High Temperature) Superconducting Radiofrequency Cavities for the Search of Axion Dark Matter

  • Golm, Jessica
  • Arguedas Cuendis, S.
  • Calatroni, Sergio
  • Cogollos, C.
  • Döbrich, B.
  • Gallego, Juan Daniel
  • García Barceló, José María
  • Granados, Xavier
  • Gutierrez Royo, Joffre
  • Irastorza, Igor G.
  • Koettig, T.
  • Lamas, Neil
  • Liberadzka-Porret, J.
  • Malbrunot, C.
  • Millar, W. Lee
  • Navarro, P.
  • Pereira Carlos, Carlota
  • Puig Molina, Teresa
  • Rosaz, Guillaume J.
  • Siodlaczek, Marc
  • Telles, Guilherme
  • Wuensch, Walter
5 pages, 6 figures. v2: minor updates after referee comments, matches published version in IEEE, The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 $\mu$eV. The figure of merit of our detector depends linearly on the quality factor of the cavity and therefore we are researching the possibility of coating our cavities with different superconducting materials to increase the quality factor. Since the experiment operates in strong magnetic fields of 11 T and more, superconductors with high critical magnetic fields are necessary. Suitable materials for this application are for example REBa$_2$Cu$_3$O$_{7-x}$, Nb$_3$Sn or NbN. We designed a microwave cavity which resonates at around 9~GHz, with a geometry optimized to facilitate superconducting coating and designed to fit in the bore of available high-field accelerator magnets at CERN. Several prototypes of this cavity were coated with different superconducting materials, employing different coating techniques. These prototypes were characterized in strong magnetic fields at 4.2 K., This project has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 730871 (ARIES-TNA). BD and JG acknowledge funding through the European Research Council under grant ERC-2018-StG-802836 (AxScale). We also acknowledge funding via the Spanish Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under project PID2019- 108122GB-C33, and the grant FPI BES-2017-079787 (under project FPA2016-76978-C3-2-P). Furthermore we acknowledge support from SuMaTe RTI2018-095853-B-C21 from MICINN co-financed by the European Regional Development Fund, Center of Excellence award Severo Ochoa CEX2019- 000917-S and CERN under Grant FCCGOV-CC-0208 (KE4947/ATS)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrically-Driven Oxygen Vacancy Aggregation and Displacement in YBa2Cu3O7−δ Films

  • Collienne, Simon
  • Marinković, Stefan
  • Fernández Rodríguez, Alejandro
  • Mestres, Narcís
  • Palau, Anna
  • Silhanek, Alejandro V.
Combining direct visualization of current-induced oxygen migration through optical microscopy and finite element modeling of driven oxygen diffusion, it is possible to estimate the average activation energy of oxygen motion in the crystallographic ab-plane of c-axis oriented polycrystalline YBa2Cu3O7−δ films. Experiments and modeling are compared side-by-side for the case of constant current electromigration as well as for a train of current pulses of varying amplitude. The simulations reproduce the induced resistance changes after electromigration and confirm a high degree of spatial inhomogeneity in the stoichiometry. Assuming a temperature and oxygen concentration dependent resistivity, the authors are able to capture the change of superconducting critical temperature, normal state resistance, and the development of multistep transitions as a function of the electromigration history. The simulations are further applied to scrutinize the influence of activation energy, disorder in oxygen content, and initial oxygen concentration on the electromigration process. These results shed new light on the non-local modifications produced by the electromigration process on oxide conductors., S.C. and S.M. contributed equally to this work. The authors thank Xavier Granados for useful discussions. This work was supported by the Fonds de la Recherche Scientifique - FNRS under the grants CDR J.0151.19, EQP U.N027.18, and PDR T.0204.21 and the COST action NanoCoHybri (CA 16218). S.M. acknowledges support from FRS-FNRS (Research Fellowship ASP). The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R& D (CEX2019-000917-S) and SuMaTe project (RTI2018-095853-B-C21), cofinanced by the European Regional Development Fund, and from the Catalan Government (2017-SGR- 1519)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical and Microstructural Nanoscale Homogeneity in Superconducting YBa2Cu3O7-x Films Derived from Metal-Propionate Fluorine-free Solutions

  • Saltarelli, Lavinia
  • Gupta, Kapil
  • Rasi, Silvia
  • Kethamkuzhi, Aiswarya
  • Queraltó, Albert
  • García Franco, Diana
  • Gutierrez, Joffre
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
Research involved in developing alternative energy sources has become a necessity to face global warming. In this context, superconductivity is an appealing solution to enhance clean electrical energy provided that lower production costs can be attained. By implementation of chemical solution deposition techniques and high-throughput growth methods, low-cost nanostructured epitaxial cuprate superconductors are timely candidates. Here, we present a versatile and tunable solution method suitable for the preparation of high-performance epitaxial cuprate superconducting films. Disregarding the renowned trifluoroacetate route, we center our focus on the transient liquid-assisted growth (TLAG) that meets the requirement of being a greener chemical process together with ultrafast growth rates beyond 100 nm/s. We developed a facile, fast, and cost-effective method, starting from the synthesis of metal-propionate powders of Y, Ba, and Cu of high purity and high yields, being the precursors of the fluorine-free solutions, which enable the chemical and microstructural nanoscale homogeneity of YBa2Cu3O7-x (YBCO) precursor films. These solutions present endured stability and enable precise tunability of the composition, concentration, porosity, and film thickness. Homogeneous precursor films up to thicknesses of 2.7 μm through eight layer multidepositions are demonstrated, thus establishing the correct basis for epitaxial growth using the fast kinetics of the TLAG process. YBCO films of 500 nm thickness with a critical current density of 2.6 MA/cm2 at 77 K were obtained, showing the correlation of precursor film homogeneity to the final YBCO physical properties., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964), and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Programme for Centres of Excellence in FUNFUTURE (CEX2019-000917-S), SUMATE projects (RTI2018-095853-B-C21, RTI2018-095853-B-C22 co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE), and SUPERENERTECH projects (PID2021-127297OB-C21 and PID2021-127297OB-C22). The authors also thank support from the Catalan Government with 2017-SGR-1519 and Catalan energy network XRE4S (2018 XARDI 00002). L.S., D.G., and A.K. acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.S. and D.G. would like to thank the UAB PhD program in Materials Science, and A.K. would like to thank the UAB PhD program in Physics. A.Q. would like to thank the Spanish Ministry of Science, Innovation and Universities [“Juan de la Cierva” postdoctoral fellowship (grant no. IJC2018-035034-I)]. The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. The content of this paper is the object of a European patent application no. EP22382741.1 filed on 29/07/2022., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing vortex pinning in YBa2Cu3O7-x superconducting films up to high magnetic fields

  • Vallés, Ferran
  • Palau, Anna
  • Abraimov, Dmytro
  • Jaroszynski, Jan
  • Constantinescu, Anca Monia
  • Mundet, Bernat
  • Obradors, Xavier
  • Larbalestier, David
  • Puig Molina, Teresa
The magnetic flux pinning capabilities of YBa2Cu3O7-x (YBCO) coated conductors vary strongly across different regions of the magnetic field–temperature phase diagram and with the orientation of the magnetic field θ. Here, we determine the optimal pinning landscape for a given region of the phase diagram by investigating the critical current density Jc(H,θ,T) in the 5–77 K temperature range, from self-field to high magnetic fields of 35 T. Our systematic analysis reveals promising routes for artificially engineering YBCO coated conductors in any region of interest of the phase diagram. In solution-derived nanocomposites, we identify the relevance of coexisting high amounts of short stacking faults, Cu-O vacancy clusters, and segmentation of twin boundaries, in combination with nanoparticles, for enhanced pinning performance at high magnetic fields and low temperatures. Moreover, we demonstrate that twin boundaries preserve a high pinning energy in thick YBCO films, which is beneficial for the pinning performance at high magnetic fields and high temperatures., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496), ULTRASUPERTAPE (ERC-2014-ADG-669504), EUROTAPES project (FP7-NMP-Large-2011-280432), the CONSOLIDER Excellence Network (Grant No. MAT2015-68994-REDC), COACHSUPENERGY project (Grant No. MAT2014-56063-C2-1- R and SuMaTe RTI2018-095853-B-C21, co-financed by the European Regional Development Fund), and from the Catalan Government with Grant No. 2014-SGR-753 and 2017-SGR-1519. Authors also thank the network collaboration of EU COST action NANOCOHYBRI CA16218. We also acknowledge the Scientific Services at ICMAB and Z. Li and P. Cayado for the growth of the studied samples. A portion of this work was performed at the National High Magnetic Field Laboratory, which is supported by the National Science Foundation Cooperative Agreement No. DMR-1644779 and the State of Florida., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBa2Cu3O7-x Superconducting Films

  • Rasi, Silvia
  • Queraltó, Albert
  • Banchewski, Juri
  • Saltarelli, Lavinia
  • García Franco, Diana
  • Pacheco, Adrià
  • Gupta, Kapil
  • Kethamkuzhi, Aiswarya
  • Soler, Laia
  • Jareño Cerulla, Julia
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBa2 Cu3 O7- x (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm-2 at 77 K and growth rates between 100-2000 nm s-1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964) and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from Spanish Ministry of Science and Innovation with PID2021-127297OB-C21 and PID2021-127297OB-C22, and from Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), and from the Spanish Ministry of Economy and Competitiveness with the SUMATE project (RTI2018-095853-B-C21, RTI2018-095853-B-C22, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE). They also thank the Catalan Government (2017-SGR-1519) and the Catalan energy network XRE4S (2018 XARDI 00002) for their support. L.S., D.G., and A.K. acknowledge financial support from Spanish Ministry of Science, Innovation and Universities through the FPI grant PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.So. and J.J. acknowledge financial support from Spanish Ministry for the FPU grants. S.R. thanks the Universitat de Girona for IFUdG grant and A.Q. thanks the Spanish Ministry of Science, Innovation and Universities (“Juan de la Cierva” postdoctoral fellowship [Grant no. IJC2018-035034-I]). The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza. The authors also acknowledge SOLEIL Synchrotron for provision of synchrotron radiation facilities and are grateful for assistance while using the DiffAbs beamline., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of growth temperature on the pinning landscape of YBa2Cu3O7−δ films grown from Ba-deficient solutions

  • Alcalà, Jordi
  • Ternero, Pau
  • Pop, Cornelia
  • Piperno, Laura
  • Ricart, Susagna
  • Mestres, Narcís
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Meledin, Alexander
  • Celentano, Giuseppe
  • Palau, Anna
Cuprate coated conductors are promising materials for the development of large-scale applications, having superior performance over other superconductors. Tailoring their vortex pinning landscape through nanostructure engineering is one of the major challenges to fulfill the specific application requirements. In this work, we have studied the influence of the growth temperature on the generation of intrinsic pinning defects in YBa2Cu3O7-δ films grown by chemical solution deposition using low Ba precursor solutions. We have analysed the critical current density as a function of the temperature, applied magnetic field magnitude and orientation, J c(T,H,θ), to elucidate the nature and strength of pinning sites and correlate the microstructure of the films with their superconducting performance. An efficient pinning landscape consisting of stacking faults and associated nanostrain is naturally induced by simply tuning the growth temperature without the need to add artificial pinning sites. Samples grown at an optimized temperature of 750 °C show very high self-field J c values correlated with an overdoped state and improved J c(T,H,θ) performances., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under Grant Agreement No. 633 053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. TEM analysis was funded from the EU Horizon 2020 research and innovation program under grant agreement 823717—ESTEEM3. The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the 'Severo Ochoa' Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), SuMaTe RTI2018-095853-B-C21, co-financed by the European Regional Development Fund), the Catalan Government with Grant 2017-SGR-1519 and the EU COST action NANOCOHYBRI CA16218. We also acknowledge the Scientific Services at ICMAB. J A like to thank the UAB PhD program in Materials Science., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-harmonic spectroscopy of quantum phase transitions in a high-Tc superconductor

  • Alcalà, Jordi
  • Bhattacharya, Utso
  • Biegert, Jens
  • Ciappina, Marcelo
  • Elu, Ugaitz
  • Grass, Tobias
  • Grochowski, Piotr T.
  • Lewenstein, Maciej
  • Palau, Anna
  • Sidiropoulos, Themistoklis P. H.
  • Steinle, Tobias
  • Tyulnev, Igor
We report on the nonlinear optical signatures of quantum phase transitions in the high-temperature superconductor YBCO, observed through high harmonic generation. While the linear optical response of the material is largely unchanged when cooling across the phase transitions, the nonlinear optical response sensitively imprints two critical points, one at the critical temperature of the cuprate with the exponential growth of the surface harmonic yield in the superconducting phase and another critical point, which marks the transition from strange metal to pseudogap phase. To reveal the underlying microscopic quantum dynamics, a strong-field quasi-Hubbard model was developed, which describes the measured optical response dependent on the formation of Cooper pairs. Further, the theory provides insight into the carrier scattering dynamics and allows us to differentiate between the superconducting, pseudogap, and strange metal phases. The direct connection between nonlinear optical response and microscopic dynamics provides a powerful methodology to study quantum phase transitions in correlated materials. Further implications are light wave control over intricate quantum phases, light-matter hybrids, and application for optical quantum computing., We thank V. Kunets from MMR Technologies and X. Menino at Institut de Ciencies Fotoniques for technical support and Dr. K. Dewhurst and Dr. S. Sharma for help with the ELK code. J.B., U.E., T.P.H.S., T.S., and I.T. acknowledge financial support from the European Research Council (ERC) for ERC Advanced Grant “TRANSFORMER” (grant 788218) and ERC Proof of Concept Grant “miniX” (grant 840010). J.B. and group acknowledge support from FET -OPEN “PETACom” (grant 829153), FET-OPEN “OPTOlogic” (grant 899794), EIC-2021-PATHFINDEROPEN “TwistedNano” (grant 101046424), Laserlab-Europe (grant 654148), Marie Sklodowska-Curie ITN “smart-X” (grant 860553), Plan Nacional PID-PID2020-112664GB-I00-210901, AGAUR for 2017 SGR 1639, “Severo Ochoa” (grant SEV-2015-0522), Fundació Cellex Barcelona, the CERCA Programme/Generalitat de Catalunya, and the Alexander von Humboldt Foundation for the Friedrich Wilhelm Bessel Prize. U.B., T.G., P.T.G., and M.L. acknowledge funding from the ERC for ERC Advanced Grant NOQIA; Agencia Estatal de Investigación (R&D project CEX2019-000910-S, funded by MCIN/AEI/10.13039/501100011033, Plan National FIDEUA PID2019-106901GB-I00, FPI, QUANTERA MAQS PCI2019-111828-2, Proyectos de I+D+I “Retos Colaboración” RTC2019-007196-7); Fundació Cellex; Fundació Mir-Puig; Generalitat de Catalunya through the CERCA program; AGAUR grant 2017 SGR 134; QuantumCAT U16-011424, cofunded by ERDF Operational Program of Catalonia grant 2014-2020; EU Horizon 2020 FET-OPEN OPTOLogic (grant 899794); National Science Centre, Poland (Symfonia grant 2016/20/W/ST4/00314); Marie Skłodowska-Curie grant STREDCH 101029393; “La Caixa” Junior Leaders fellowships (ID100010434); and EU Horizon 2020 under Marie Skłodowska-Curie grant agreement 847648 (LCF/BQ/PI19/11690013, LCF/BQ/PI20/11760031, LCF/BQ/PR20/11770012, and LCF/BQ/PR21/11840013). P.T.G. acknowledges the Polish National Science Center grants 2018/31/N/ST2/01429 and 2020/36/T/ST2/00065 and is supported by the Foundation for Polish Science. Center for Theoretical Physics of the Polish Academy of Sciences is a member of the National Laboratory of Atomic, Molecular and Optical Physics. A.P. and J.A. acknowledge support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (grant SEV-2015-0496), SuMaTe project (RTI2018-095853-B-C21) cofinanced by the European Regional Development Fund, and the Catalan Government grant 2017-SGR-1519. This work was supported by EU COST action NANOCOHYBRI CA16218. M.C. acknowledges financial support from the Guangdong Province Science and Technology Major Project (Future functional materials under extreme conditions - 2021B0301030005)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transient liquid assisted growth of superconducting YBa2Cu3O7−x films based on pulsed laser deposition

  • Queraltó, Albert
  • Sieger, Max
  • Gupta, Kapil
  • Meledin, Alexander
  • Barusco, Pedro
  • Saltarelli, Lavinia
  • Palau, Mariona García de
  • Granados, Xavier
  • Obradors, Xavier
  • Puig Molina, Teresa
We investigated the integration of transient liquid-assisted growth (TLAG) approach for epitaxial YBa2Cu3O7−x (YBCO) films by physical deposition methodologies (pulsed laser deposition (PLD)), as an additional opportunity for high-throughput growth of YBCO. As a prerequisite, highly flat and amorphous YBCO precursor films were deposited by PLD at temperatures below 400 °C on single-crystalline SrTiO3 (STO) and LaMnO3 (LMO)/STO, as well as industrial coated conductor architectures. Contrary to TLAG based on chemical solution deposition, where BaCO3 elimination is a key factor for the YBCO growth, TLAG-PLD growth is controlled by the transformation of Ba-Cu-O (s) to a transient liquid. High-quality c-axis YBCO films were successfully grown on different substrates, as demonstrated by high-resolution x-ray diffraction and transmission electron microscopy. In-situ resistance measurements revealed that the growth rates around 1000 nm s−1 can be achieved, outperforming the capabilities of standard PLD growth of REBa2Cu3O7 films by few orders of magnitude. Experimental conditions such as temperature, oxygen partial pressure, and heating ramp, were optimized to obtain critical temperature (T c) values up to 90 K. Critical current densities of 15 MA cm−2 at 5 K and 1.7 MA cm−2 at 77 K were obtained for YBCO films of 450 nm on LMO/STO., The authors acknowledge European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964) and SMS-INKS project (ERC-2022-PoC-101081998), as well as the EU COST actions CA16218 (NANOCOHYBRI), CA20116 (OPERA) and CA21144 (SUPERQUMAP). We also thank financial support from the Spanish Ministry of Economy and Competitiveness, and Spanish Ministry of Science, Innovation and Universities through the 'Severo Ochoa' Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), FUNFUTURE-FIP-2020-DATOPTICON, SUPERENERTECH project (PID2021-127297OB-C21), and SUMATE project (RTI2018-095853-B-C21, co-financed by the European Regional Development Fund). We also acknowledge support from the Catalan Government with 2017-SGR-1519 and the Catalan energy network XRE4S (2018 XARDI 00002). A Q thanks the Spanish Ministry of Science, Innovation and Universities for his 'Juan de la Cierva' postdoctoral fellowship (Grant No. IJC2018-035034-I). L S acknowledges financial support from Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2019-090621. Dr Silvia Rasi and Dr Roxana Vlad are thanked for fruitful discussions. We acknowledge the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. Authors also acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node 'Laboratorio de Microscopías Avanzadas' at University of Zaragoza. SuNAM Co. is acknowledged for providing metallic substrates., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measuring the viscosity of films by thermomechanical analysis: application to metal organic precursor films of functional oxides

  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • López Olmedo, Joan Pere
  • Villarejo, Bohores
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
We have developed a new method to measure the viscosity of micrometric films by thermomechanical analysis with a hemispherical probe of millimetric diameter. The loading curve (displacement vs. time) recorded as the probe tip crosses the whole film at constant load until it touches the substrate is fitted to a theoretical curve shape that has been obtained after solving the problem of liquid flow under the probe tip. The method has been validated by measuring the viscosity of rosin films. It has been applied to analyze the thermal evolution of unstable liquid films that appear on Ba propionate, Ce(III) propionate and a low-fluorine precursor film of YBa2Cu3O6+x. During pyrolysis of the last two films, viscosity first diminishes due to heating and then it increases as solid oxide particles are formed inside the liquid., This work has been partially funded by the Spanish Programa Nacional de Materiales through projects MAT2014-51778-C2-1-R, MAT2014-51778-C2-2-R, RTI2018-095853-B-C21, RTI2018-095853-B-C22, PID2021-127297OB-C21 and PID2021-127297OB-C21, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE and also by the Generalitat de Catalunya contract No. 2017-SGR001519 and by the Universitat de Girona contract No. MPCUdG2016/059. We are indebted to the Serveis Generals de Recerca (SGR) of the University of Girona for the use of the thermal analysis facilities. We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S. We are grateful to Aleix Prat for doing TMA preliminary experiments., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Field quality and surface resistance studies of a superconducting REBa2Cu3O

_{7-x}—Cu hybrid coating for the FCC beam screen
  • Telles, Guilherme
  • Romanov, Artur
  • Calatroni, Sergio
  • Granados, Xavier
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
To ensure beam stability in the future circular collider study of the European Organization for Nuclear Research, RE(=Y, Gd, Eu)Ba2Cu3O 7 − x high-temperature superconductor was proposed as a low-surface impedance coating for its beam screen. Unfortunately, persistent currents in the superconductor will degrade the magnetic field homogeneity inside the beam chamber, endangering the stability of the beam trajectory. To counteract this effect, we have explored the possibility of using a highly conductive hybrid coating made of Cu and REBa2Cu3O 7 − x . This decreases the surface impedance when compared to that of pure copper, while maintaining high magnetic field quality inside the beam screen chamber. This work formulates guidelines for hybrid coating geometries to comply with the field quality criterion of a circular accelerator during operation with dipole magnets by means of finite elements numerical analysis. We produced hybrid coating samples with compliant geometries via photolithography. Scanning Hall microscopy and radio-frequency characterization have given the first experimental confirmation that these hybrid coatings offer high field quality and present a surface resistance lower than that of copper for the beam screen of the future circular hadron collider. The excellent agreement shown between experimental results and simulations validates that the numerical analysis performed throughout this work can be used as a prediction tool for future proposed geometries., Authors acknowledge the support and samples provided by Bruker HTS GmbH, Fujikura Ltd., Sunam Co., SuperOx, SuperPower Inc. and THEVA Dünnschichttechnik GmbH. Authors acknowledge CERN funding FCCGOV-CC-0208 (KE4947/ATS), RTI2018-095853-B-C21 SuMaTe and PID2021-127297OB-C21 SUPERENERTECH projects from MICINN and co-financing by the European Regional Development Fund; 2017-SGR 1519 from Generalitat de Catalunya and COST Action NANOCOHYBRI (CA16218) from EU. ICMAB authors acknowledge the Center of Excellence award Severo Ochoa CEX2019-000917-S. A R acknowledges MSCA-COFUND-2016-754397 for PhD grant. Authors want to acknowledge Dr M Pont for the fruitful discussion on the evaluation of the multipole coefficients, and Dr M Giovannozzi and Dr E Todesco (from CERN) for the input data regarding the acceptable values. We also want to thank Dr J O'Callaghan and Patrick Krkotić for the co-development of the DR resonator employed in the surface resistance measurements., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A sulfurization method for creating the buffer-layers current flow diverter architecture in REBa2Cu3O7 coated conductors

  • Barusco, Pedro
  • Giguère, Jael
  • Lacroix, Christian
  • Sirois, Frédéric
  • Granados, Xavier
  • Puig Molina, Teresa
  • Obradors, Xavier
The current flow diverter (CFD) is a known concept that has proven to effectively reduce the probability of destructive hot spots in REBa2Cu3O7 (REBCO; RE = rare earth) coated conductors (CCs) by boosting the normal zone propagation velocity. However, the implementation of the CFD concept requires additional steps in a fabrication process that is already complex and has struggled to find a simple reel-to-reel fabrication method. This work reports on the details of a fabrication route for the buffer-layers-CFD (bCFD) architecture using a solid-vapor silver sulfurization technique to tune the geometry of the metal stabilizer in the high-temperature superconductor tape. The analysis of the microstructure and superconducting properties of the Ag2S/Ag/GdBCO trilayer processed under different conditions shows how we achieved a new customized functional CC with the bCFD architecture. In DC limitation experiments, this bCFD-sulfide architecture allowed to generate an electric potential much faster than the conventional architecture (60 V s−1 vs. 1.2 V s−1) thanks to the strong enhancement of the NPZV., The authors acknowledge the funding of this research by the FASTGRID project (EU-H2020, 721019), the projects COACHSUPENERGY (MAT2014-51778-C2-1-R), SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) from the Spanish Ministry of Economy and Competitiveness which were co-funded by the European Regional Development Fund, the project 2017-SGR 753 from Generalitat de Catalunya and the COST Action NANOCOHYBRI (CA16218). ICMAB authors also acknowledge the Center of Excellence awards Severo Ochoa SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

High harmonic spectroscopy of quantum phases in a high-Tc superconductor

  • Alcalà, Jordi
  • Bhattacharya, Utso
  • Ciappina, Marcelo
  • Elu, Ugaitz
  • Graß, Tobias
  • Grochowski, Piotr T.
  • Lewenstein, Maciej
  • Palau, Anna
  • Sidiropoulos, Themistoklis P.H.
  • Steinle, Tobias
  • Tyulnev, Igor
  • Biegert, Jens
Ultrafast carrier dynamics are uniquely sensitive to the correlated interactions within quantum materials as well as their transition to different phases, like the emergence of superconductivity (SC) [1,2]., We thank V. Kunets from MMR Technologies and X. Menino at Institut de Ciencies Fotoniques for technical support and Dr. K. Dewhurst and Dr. S. Sharma for help with the ELK code. J.B., U.E., T.P.H.S., T.S., and I.T. acknowledge financial support from the European Research Council (ERC) for ERC Advanced Grant “TRANSFORMER” (grant 788218) and ERC Proof of Concept Grant “miniX” (grant 840010). J.B. and group acknowledge support from FET -OPEN “PETACom” (grant 829153), FET-OPEN “OPTOlogic” (grant 899794), EIC-2021-PATHFINDEROPEN “TwistedNano” (grant 101046424), Laserlab-Europe (grant 654148), Marie Sklodowska-Curie ITN “smart-X” (grant 860553), Plan Nacional PID-PID2020-112664GB-I00-210901, AGAUR for 2017 SGR 1639, “Severo Ochoa” (grant SEV-2015-0522), Fundació Cellex Barcelona, the CERCA Programme/Generalitat de Catalunya, and the Alexander von Humboldt Foundation for the Friedrich Wilhelm Bessel Prize. U.B., T.G., P.T.G., and M.L. acknowledge funding from the ERC for ERC Advanced Grant NOQIA; Agencia Estatal de Investigación (R&D project CEX2019-000910-S, funded by MCIN/AEI/10.13039/501100011033, Plan National FIDEUA PID2019-106901GB-I00, FPI, QUANTERA MAQS PCI2019-111828-2, Proyectos de I+D+I “Retos Colaboración” RTC2019-007196-7); Fundació Cellex; Fundació Mir-Puig; Generalitat de Catalunya through the CERCA program; AGAUR grant 2017 SGR 134; QuantumCAT U16-011424, cofunded by ERDF Operational Program of Catalonia grant 2014-2020; EU Horizon 2020 FET-OPEN OPTOLogic (grant 899794); National Science Centre, Poland (Symfonia grant 2016/20/W/ST4/00314); Marie Skłodowska-Curie grant STREDCH 101029393; “La Caixa” Junior Leaders fellowships (ID100010434); and EU Horizon 2020 under Marie Skłodowska-Curie grant agreement 847648 (LCF/BQ/PI19/11690013, LCF/BQ/PI20/11760031, LCF/BQ/PR20/11770012, and LCF/BQ/PR21/11840013). P.T.G. acknowledges the Polish National Science Center grants 2018/31/N/ST2/01429 and 2020/36/T/ST2/00065 and is supported by the Foundation for Polish Science. Center for Theoretical Physics of the Polish Academy of Sciences is a member of the National Laboratory of Atomic, Molecular and Optical Physics. A.P. and J.A. acknowledge support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (grant SEV-2015-0496), SuMaTe project (RTI2018-095853-B-C21) cofinanced by the European Regional Development Fund, and the Catalan Government grant 2017-SGR-1519. This work was supported by EU COST action NANOCOHYBRI CA16218. M.C. acknowledges financial support from the Guangdong Province Science and Technology Major Project (Future functional materials under extreme conditions - 2021B0301030005). We also acknowledge the Scientific Services at Institut de Ciència de Materials de Barcelona and ICN2., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Progress in superconducting REBa2Cu3O7 (RE = rare earth) coated conductors derived from fluorinated solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Palau, Anna
  • Coll, Mariona
  • Gutierrez Royo, Joffre 
  • Farjas, Jordi
  • Bartolomé, Elena
In this work, we review recent progress achieved in the use of chemical solution deposition (CSD) based on fluorinated metalorganic precursors to grow superconducting REBa2Cu3O7 (REBCO) films and coated conductors (CCs). We examine, first of all, the advances in optimizing the steps related to the solutions preparation, deposition and pyrolysis based on novel low-fluorine metalorganic solutions. We show that a new type of multifunctional colloidal solutions including preformed nanoparticles (NPs), can be used to introduce artificial pinning centers (APCs). We analyze how to disentangle the complex physico-chemical transformations occurring during the pyrolysis with the purpose of maximizing the film thicknesses. Understanding the nucleation and growth mechanisms is shown to be critical to achieve a fine tuning of the final microstructure, either using the spontaneous segregation or the colloidal solution approaches, and make industrially scalable this process. Advanced nanostructural studies have deeply modified our understanding of the defect structure and its genealogy. It is remarkable the key role played by the high concentration of randomly distributed and oriented BaMO3 (M = Zr, Hf) NPs which enhance the concentration of APCs, such as stacking faults and the associated partial dislocations. Correlating the defect structure with the critical current density Jc (H,T,θ) allows to reach a tight control of the vortex pinning properties and to devise a general scheme of the vortex pinning landscape in the whole H-T phase diagram. We also refer to the outstanding recent achievements in enhancing the vortex pinning strength by shifting the carrier concentration in REBCO films towards the overdoped state, where the pinning energy is maximum and so, record values of critical current densities are achieved. This confirms the performance competitiveness of nanocomposite CCs prepared through the CSD route. We conclude with a short summary of the progress in scaling the CC manufacturing using fluorinated solutions., Authors acknowledge the European Union Research Council for EUROTAPES (EU-FP7-NMP-LA-2012-280432) and FASTGRID (EU-H2020, 721019) projects and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144); the European Research Council for ULTRASUPERTAPE (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998) projects. Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for COACHSUPENERGY project (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R), SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22), SUPERENERTECH (PID2021-127297OB-C21, PID2021-127297OB-C22) and PID2022-138492NB-I00, FUNMAT and FUNFUTURE ICMAB 'Severo Ochoa' Program for Centers of Excellence in R&D (SEV-2015-0496, CEX2019-000917-S) and HTS-JOINTS (PDC2022-133208-I00). They also thank the PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and Catalan Government for 2017 SGR 1519 and 2021 SGR 00440 and that of Aragon for RASMIA (E12-23R)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thin film (high temperature) superconducting radiofrequency cavities for the search of axion dark matter

  • Golm, J.
  • Arguedas Cuendis, S.
  • Calatroni, S.
  • Cogollos, C.
  • Dobrich, B.
  • Gallego, J.D.
  • Garcia Barcelo, J.M.
  • Granados, X.
  • Gutierrez, J.
  • García Irastorza, I.
  • Koettig, T.
  • Lamas, N.
  • Liberadzka-Porret, J.
  • Malbrunot, C.
  • Millar, W.L.
  • Navarro, P.
  • Carlos, C.P.A.
  • Puig, T.
  • Rosaz, G.J.
  • Siodlaczek, M.
  • Telles, G.
  • Wuensch, W.
The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 μ eV. The figure of merit of our detector depends linearly on the quality factor of the cavity and therefore we are researching the possibility of coating our cavities with different superconducting materials to increase the quality factor. Since the experiment operates in strong magnetic fields of 11 T and more, superconductors with high critical magnetic fields are necessary. Suitable materials for this application are for example REBa 2 Cu 3 O 7−x , Nb 3 Sn or NbN. We designed a microwave cavity which resonates at around 9 GHz, with a geometry optimized to facilitate superconducting coating and designed to fit in the bore of available high-field accelerator magnets at CERN. Several prototypes of this cavity were coated with different superconducting materials, employing different coating techniques. These prototypes were characterized in strong magnetic fields at 4.2 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Using evolved gas analysis-mass spectrometry to characterize adsorption on a nanoparticle surface

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Roura, Pere|||0000-0003-4964-1362
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
The surface chemistry of nanoparticles is the key factor to control and predict their interactions with molecules, ions, other particles, other materials, or substrates, determining key properties such as nanoparticle stability or biocompatibility. In consequence, the development of new techniques or modification of classical techniques to characterize nanoparticle surfaces is of utmost importance. Here, a classical analysis technique, thermally evolved gas analysis-mass spectrometry (EGA-MS), is employed to obtain an image of the nanoparticle-solvent interface, unraveling the molecules present on the surface. As the use of complementary techniques is urged, the validity of EGA-MS characterization is corroborated by comparison with a previously reported surface characterization method. Previous studies were based on several experimental techniques and MD simulations using YF nano/supraparticles and LaF nanoparticles as model systems. We demonstrate the applicability of this technique in two differently sized systems and two systems composed of the same ions on their surface but with a different inorganic core (e.g. LaF and YF nanoparticles). The results described in this paper agree well with our previous results combining experimental techniques and MD simulations. EGA-MS not only revealed the ions attached to the nanoparticle surface but also shed light on their coordination (e.g. citrate attached to one or two carboxylate moieties). Thus, we show that EGA-MS is a useful and efficient technique to characterize the surface chemistry of nanoparticles and to control and predict their final properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrafast transient liquid assisted growth of high current density superconducting films

  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Banchewski, Juri|||0000-0002-6654-5527
  • Rasi, Silvia|||0000-0003-4935-3918
  • Chamorro, Natalia|||0000-0002-9531-1869
  • Guzmán Aluja, Roger|||0000-0002-5580-0043
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Mocuta, C.|||0000-0001-5540-449X
  • Ricart, S.
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, P.
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The achievement of high growth rates in YBaCuO epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s -1) and high critical current densities (5 MA cm -2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process. High throughput manufacturing of long length coated conductors requires fast epitaxial growth of high-temperature superconducting films. Here, Soler et al. report an ultrafast growth rates and high critical current densities of YBaCuO films using a transient liquid-assisted growth method.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High frequency response of thick REBCO coated conductors in the framework of the FCC study

  • Romanov, Artur
  • Krkotić, Patrick
  • Telles, Guilherme
  • O'Callaghan, Joan
  • Pont, Montse
  • Perez, Francis
  • Granados García, Xavier
  • Calatroni, Sergio
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Gutiérrez, Joffre
A thorough microwave response study of high temperature superconductors, considered as an alternative beam screen coating, has become integral in the design decisions for CERN's future research infrastructure. Here, we present the surface resistance of various (RE = rare earth) coated conductors available in large scale as a function of magnetic field in a broad temperature range measured by a Hakki-Coleman type resonator with resonant frequency . Analysis of the high frequency dissipation supported by DC transport characterization reveals the vortex dynamics in thick films. Determined microscopic vortex parameters span over a wide range of magnitudes and reflect the relevance of the superconducting layer's microstructure. We demonstrate that the depinning frequencies surpass , which confirms the operation in high performing, low dissipation pinning regime at measurement conditions. Surface impedance extrapolation to FCC-hh conditions points towards a significant outperformance of copper by coated conductors in terms of surface resistance. The surface resistance margins would open up potential ways for a more efficient frontier circular collider.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBaCuO-x Superconducting Films

  • Rasi, Silvia|||0000-0003-4935-3918
  • Queraltó, Albert
  • Banchewski, Juri|||0000-0002-6654-5527
  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Garcia, Diana
  • Pacheco Aceña, Adrià
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Ricart, Susagna
  • Farjas, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBaCuO (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm -2 at 77 K and growth rates between 100-2000 nm s -1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods. Transient liquid assisted growth (TLAG) is an ultrafast, non-equilibrium growth process governed by kinetic parameters, accessible only through fast in situ characterizations. These methods are used to build kinetic diagrams of phase evolution and growth rate which are unique guides to reach the conditions for ultrafast growth (>1000 nm s - 1) and high-performance superconducting films by combining kinetic and thermodynamic parameters.