Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

FCC physics opportunities: Future Circular Collider conceptual design report volume 1

  • Abada, Asmaa
  • Heinemeyer, Sven
  • No Redondo, José Miguel
Artículo escrito por un elevado número de autores, solo se referencian el que aparece en primer lugar, el nombre del grupo de colaboración, si le hubiere, y los autores pertenecientes a la UAM, We review the physics opportunities of the Future Circular Collider, covering its e+e−, pp, ep and heavy ion programmes. We describe the measurement capabilities of each FCC component, addressing the study of electroweak, Higgs and strong interactions, the top quark and flavour, as well as phenomena beyond the Standard Model. We highlight the synergy and complementarity of the different colliders, which will contribute to a uniquely coherent and ambitious research programme, providing an unmatchable combination of precision and sensitivity to new physics, The reserch, which led to this publication has received funding from the European Union’s Horizon 2020 research and innovation programme under the Grant numbers 654305 (EuroCirCol), 764879 (EASITrain), 730871 (ARIES), 777563 (RI-Paths) and from FP7 under grant number 312453 (EuCARD-2). The information herein only reflects the views of its authors. The European Commission is not responsible for any use that may be made of the information
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

High intensity proton beam impact at 440 GeV/c on Mo and Cu coated CfC/graphite and SiC/SiC absorbers for beam intercepting devices

  • Maestre, J.
The authors would like to acknowledge the support of CERN's Sources, Targets and Interactions (STI) Group, the Accelerator Consolidation Project at CERN, as well as M. Wendt and F. Caspers. This program is partially supported by JSPS KAKENHI Grant Number JP16H03994. This support is gratefully acknowledged. The research leading to these results has received funding from the transnational access activity ARIES which is co-funded by the European Union's Horizon 2020 Research and innovation programme under Grant Agreement no. 730871., Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injection or LHC TDI) is the main protection BID of the LHC injection system; its main function is to protect LHC equipment in the event of a malfunction of the injection kicker magnets during beam transfer from the SPS to the LHC. Several issues with the TDI were encountered during LHC operation, most of them due to outgassing from its core components induced by electron cloud effects, which led to limitations of the injector intensity and hence had an impact onLHCavailability. The absorbing cores of the TDIs, and of beam intercepting devices in general, need to deal with high thermo-mechanical loads induced by the high intensity particle beams. In addition, devices such as the TDI—where the absorbing materials are installed close to the beam, are important contributors to the accelerator impedance budget. To reduce impedance, the absorbing materials that make up the core must be typically coated with high electrical conductivity metals. Beam impact testing of the coated absorbers is a crucial element of development work to ensure their correct operation. In the work covered by this paper, the behaviour of several metal-coated absorber materials was investigated when exposed to high intensity and high energy proton beams in the HiRadMat facility at CERN. Different coating configurations based on copper and molybdenum, and absorbing materials such as isostatic graphite, Carbon Fibre Composite (CfC) and Silicon Carbide reinforced with Silicon Carbide fibres (SiC-SiC), were tested in the facility to assess the TDI’s performance and to extract information for other BIDs using these materials. In addition to beam impact tests and an extensive Post Irradiation Examination (PIE) campaign to assess the performance of the coatings and the structural integrity of the substrates, extensive numerical simulations were carried out., CERN's Sources, Targets and Interactions (STI) Group, Accelerator Consolidation Project at CERN, Ministry of Education, Culture, Sports, Science and Technology, Japan (MEXT), Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research (KAKENHI) JP16H03994, transnational access activity ARIES - European Union 730871
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Future circular collider feasibility study report: volume 1 physics, experiments, detectors

  • Benedikt, M.
  • Zimmermann, Frank
  • Auchmann, Bernhard
  • Bartmann, Wolfgang
  • Burnet, Jean-Paul
  • Carli, Christian
  • Chancé, Antoine
  • Craievich, Paolo
  • Giovannozzi, Massimo
  • Chachamis, Grigorios
  • Grojean, Christophe
  • Gutleber, Johannes
  • Hanke, Klaus
  • Henriques, André
  • Janot, Patrick
  • Lourenço, Carlos
  • Mangano, Michelangelo
  • Otto, Thomas
  • Zykova, Mariia
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study's focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme., The research carried out by the international FCC collaboration hosted by CERN, which led to this publication, has received funding from the European Union's Horizon 2020 research and innovation programme under the grant numbers 951754 (FCCIS), 654305 (EuroCirCol), 764879 (EASITrain), 730871 (ARIES), 777563 (RI-Paths), 101086276 (EAJADE), 101004730 (iFAST), 101131435 (iSAS), 101131850 (RF2.0) and from FP7 under grant number 312453 (EuCARD-2).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

HE-LHC: The High-Energy Large Hadron Collider Future Circular Collider Conceptual Design Report Volume 4

  • Abada, A.
  • Gutierrez Royo, Joffre
  • Romanov, Artur
In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FCC-hh: The Hadron Collider Future Circular Collider Conceptual Design Report Volume 3

  • Abada, A.
  • Gutierrez Royo, Joffre
  • Romanov, Artur
A. Abada et al., In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FCC-ee: The Lepton Collider Future Circular Collider Conceptual Design Report Volume 2

  • Abada, A.
  • Gutierrez Royo, Joffre
  • Romanov, Artur
  • Zurita, Jose
Abada, A. et al., In response to the 2013 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) study was launched, as an international collaboration hosted by CERN. This study covers a highest-luminosity high-energy lepton collider (FCC-ee) and an energy-frontier hadron collider (FCC-hh), which could, successively, be installed in the same 100 km tunnel. The scientific capabilities of the integrated FCC programme would serve the worldwide community throughout the 21st century. The FCC study also investigates an LHC energy upgrade, using FCC-hh technology. This document constitutes the second volume of the FCC Conceptual Design Report, devoted to the electron-positron collider FCC-ee. After summarizing the physics discovery opportunities, it presents the accelerator design, performance reach, a staged operation scenario, the underlying technologies, civil engineering, technical infrastructure, and an implementation plan. FCC-ee can be built with today’s technology. Most of the FCC-ee infrastructure could be reused for FCC-hh. Combining concepts from past and present lepton colliders and adding a few novel elements, the FCC-ee design promises outstandingly high luminosity. This will make the FCC-ee a unique precision instrument to study the heaviest known particles (Z, W and H bosons and the top quark), offering great direct and indirect sensitivity to new physics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FCC-ee: The Lepton Collider: Future Circular Collider Conceptual Design Report Volume 2

  • FCC Collaboration
  • Aguilera-Verdugo, J. J.
  • Hernández Gamazo, Pilar
  • Ramirez-Uribe, S.
  • Renteria-Olivo, A.E.
  • Rodrigo, Germán
  • Sborlini, G.F.R.
  • Valle, José W. F.
  • Heinemeyer, S.
  • No, José Miguel
  • Gutierrez, J.
  • Romanov, Artur
In response to the 2013 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) study was launched, as an international collaboration hosted by CERN. This study covers a highest-luminosity high-energy lepton collider (FCC-ee) and an energy-frontier hadron collider (FCC-hh), which could, successively, be installed in the same 100 km tunnel. The scientific capabilities of the integrated FCC programme would serve the worldwide community throughout the 21st century. The FCC study also investigates an LHC energy upgrade, using FCC-hh technology. This document constitutes the second volume of the FCC Conceptual Design Report, devoted to the electron-positron collider FCC-ee. After summarizing the physics discovery opportunities, it presents the accelerator design, performance reach, a staged operation scenario, the underlying technologies, civil engineering, technical infrastructure, and an implementation plan. FCC-ee can be built with today's technology. Most of the FCC-ee infrastructure could be reused for FCC-hh. Combining concepts from past and present lepton colliders and adding a few novel elements, the FCC-ee design promises outstandingly high luminosity. This will make the FCC-ee a unique precision instrument to study the heaviest known particles (Z, W and H bosons and the top quark), offering great direct and indirect sensitivity to new physics., The research, which led to this publication has received funding from the European Union's Horizon 2020 research and innovation programme under the grant numbers 654305 (EuroCirCol), 764879 (EASITrain), 730871 (ARIES), 777563 (RI-Paths) and from FP7 under grant number 312453 (EuCARD-2)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FCC-hh: The Hadron Collider: Future Circular Collider Conceptual Design Report Volume 3

  • FCC Collaboration
  • Aguilera-Verdugo, J.J.
  • Hernández Gamazo, Pilar
  • Ramirez-Uribe, S.
  • Renteria-Olivo, A.E.
  • Rodrigo, Germán
  • Sborlini, G.F.R.
  • Valle, José W. F.
  • Heinemeyer, Sven
  • No, José Miguel
  • Gutierrez, J.
  • Romanov, Artur
In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100TeV. Its unprecedented centre of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin Film (High Temperature) Superconducting Radiofrequency Cavities for the Search of Axion Dark Matter

  • Golm, Jessica
  • Arguedas Cuendis, S.
  • Calatroni, Sergio
  • Cogollos, C.
  • Döbrich, B.
  • Gallego, Juan Daniel
  • García Barceló, José María
  • Granados, Xavier
  • Gutierrez Royo, Joffre
  • Irastorza, Igor G.
  • Koettig, T.
  • Lamas, Neil
  • Liberadzka-Porret, J.
  • Malbrunot, C.
  • Millar, W. Lee
  • Navarro, P.
  • Pereira Carlos, Carlota
  • Puig Molina, Teresa
  • Rosaz, Guillaume J.
  • Siodlaczek, Marc
  • Telles, Guilherme
  • Wuensch, Walter
5 pages, 6 figures. v2: minor updates after referee comments, matches published version in IEEE, The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 $\mu$eV. The figure of merit of our detector depends linearly on the quality factor of the cavity and therefore we are researching the possibility of coating our cavities with different superconducting materials to increase the quality factor. Since the experiment operates in strong magnetic fields of 11 T and more, superconductors with high critical magnetic fields are necessary. Suitable materials for this application are for example REBa$_2$Cu$_3$O$_{7-x}$, Nb$_3$Sn or NbN. We designed a microwave cavity which resonates at around 9~GHz, with a geometry optimized to facilitate superconducting coating and designed to fit in the bore of available high-field accelerator magnets at CERN. Several prototypes of this cavity were coated with different superconducting materials, employing different coating techniques. These prototypes were characterized in strong magnetic fields at 4.2 K., This project has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 730871 (ARIES-TNA). BD and JG acknowledge funding through the European Research Council under grant ERC-2018-StG-802836 (AxScale). We also acknowledge funding via the Spanish Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under project PID2019- 108122GB-C33, and the grant FPI BES-2017-079787 (under project FPA2016-76978-C3-2-P). Furthermore we acknowledge support from SuMaTe RTI2018-095853-B-C21 from MICINN co-financed by the European Regional Development Fund, Center of Excellence award Severo Ochoa CEX2019- 000917-S and CERN under Grant FCCGOV-CC-0208 (KE4947/ATS)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and properties of high thermal conductivity molybdenum carbide - graphite composites

  • Guardia-Valenzuela, Jorge
  • Bertarelli, Alessandro
  • Carra, Federico
  • Mariani, Nicola
  • Bizzaro, Stefano
  • Arenal, Raúl
A family of novel graphite-based composites reinforced with a dispersion of molybdenum carbide particles, with very high thermal and electrical properties, has been recently developed at CERN, in collaboration with Brevetti Bizz (IT), for applications in particle accelerators. These materials, produced by spark plasma sintering, assisted by liquid phase, have been extensively investigated and characterized. The influence of the initial constituents, together with the sintering parameters, have been studied in view of optimizing the thermo-physical and mechanical properties as well as ultra-high vacuum compatibility. The carbide phases and the microstructures have been analysed. Their excellent thermal conductivity (approaching 800 Wm-1K-1), low thermal expansion and low density make these materials appealing for high-end thermal management applications., The research leading to these results has received funding from the European Commission under the FP7 Research Infrastructures project EuCARD-2, grant agreement No 312453. This project has received funding from the European Union's Horizon 2020 Research and Innovation programme under Grant Agreement No 730871. Research supported by the High Luminosity LHC project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel LHC collimator materials: High-energy Hadron beam impact tests and nondestructive postirradiation examination

  • Gobbi, Giorgia
  • Bertarelli, Alessandro
  • Carra, Federico
  • Guardia-Valenzuela, Jorge
  • Redaelli, Stefano
The LHC collimation system must adopt materials with excellent thermal shock resistance, high electrical conductivity, geometrical stability, and radiation hardness. Two novel composites, Molybdenum–Carbide–Graphite and Copper–Diamond, are proposed for the LHC collimation upgrade. A postirradiation examination was performed to assess the status of the composites, tested under intense proton beam impacts at the CERN HiRadMat facility. Metrology measurements, computed tomography, and 3D topography allowed to evaluate the localized spallation induced by the beam. This article provides an overview of the thermophysical characterization of the two composites before irradiation and nondestructive postirradiation results., The research leading to these results has received funding from the European Commission under the FP7 Research Infrastructures project EuCARD-2, grant agreement No 312453. This project has received funding from the European Union's Horizon 2020 Research and Innovation program under Grant Agreement No 730871., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

RADES axion search results with a high-temperature superconducting cavity in an 11.7 T magnet

  • Ahyoune, Saiyd
  • Álvarez Melcón, Alejandro
  • Arguedas Cuendis, S.
  • Calatroni, Sergio
  • Cogollos, Cristian
  • Díaz Morcillo, Alejandro
  • Döbrich, B.
  • Gallego, Juan Daniel
  • García Barceló, José María
  • Gimeno, B.
  • Golm, J.
  • Granados, Xavier
  • Gutierrez Royo, Joffre 
  • Herwig, L.
  • Irastorza, I. G.
  • Lamas, Neil
  • Lozano Guerrero, Antonio José
  • Malbrunot, C.
  • Millar, W. Lee
  • Miralda Escudé, J.
  • Navarro, P.
  • Navarro Madrid, José R.
  • Puig Molina, Teresa
  • Siodlaczek, Marc
  • Telles, Guilherme
  • Wuensch, Walter
We describe the results of a haloscope axion search performed with an 11.7 T dipole magnet at CERN. The search used a custom-made radio-frequency cavity coated with high-temperature superconducting tape. A set of 27 h of data at a resonant frequency of around 8.84 GHz was analysed. In the range of axion mass 36.5676 μeV to 36.5699 μeV, corresponding to a width of 554 kHz, no signal excess hinting at an axion-like particle was found. Correspondingly, in this mass range, a limit on the axion to photon coupling-strength was set in the range between g<inf>aγ</inf> ≳ 6.3 × 10<sup>−13</sup> GeV<sup>−1</sup> and g<inf>aγ</inf> ≳ 1.59 × 10<sup>−13</sup> GeV<sup>−1</sup> with a 95% confidence level., This project has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 730871 (ARIES-TNA). This work has also received funding through the European Research Council under grant ERC-2018-StG-802836 (AxScale). IGI acknowledges funding through the European Research Council under grant ERC-2017-AdG-788781 (IAXO+). This work has been partially funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, under grant PID2019-108122GB-C33, by PID2019108122GB-C32, and by Maria de Maeztu program CEX2019-000918-M. JMGB thanks the grant FPI BES-2017-079787, funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. Generalitat Valenciana has also funded this work under the project ASFAE/2022/013. The authors acknowledge the support and samples provided by THEVA. ICMAB co-authors acknowledges funds from PID2021-127297OB-C21 and CEX2019000917-S, FCC-GOV-CC-0208 (KE4947/ATS) and PRTR-C17I1 from MICIIN-NGEU-Generalitat de Catalunya. We thank Giuseppe Ruoso for the loan of equipment and the CERN teams at SM18 and in the CERN Central Cryogenic Laboratory for the support, particularly: Gerard Willering, Franco Julio Mangiarotti, Jerome Feuvrier, Marta Bajko, Patrick Viret, Guillaume Pichon, Arnaud Devred, Stephan Russenschuck, Andrzej Siemko, Joanna Liberadzka-Porret and Torsten Koettig. This research was supported by Deutsche Forschungsgemeinschaft (DFG) through Grant No. 532766533., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Future circular collider Feasibility studyreport. Volume 1 physics, experiments, detectors

  • Ahmed, I.
  • Lamas, Neil
  • Puig Molina, Teresa
  • Telles, Guilherme
  • Mantani, Luca
  • Mariñas Pardo, Carlos
  • Mitsou, Vasiliki A.
  • Musumeci, Emanuela
  • Pattnaik, Baibhab
  • Pich, Antonio
  • Renteria-Olivo, A.E.
  • Rodrigo, Germán
  • Stefanek, Ben A.
  • Valle, José W. F.
  • Zurita, Jose
  • No Redondo, José Miguel
  • Ruiz Jimeno, Alberto
FCC Collaboration: et al., Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme., Funded by SCOAP3., The research carried out by the international FCC collaboration hosted by CERN, which led to this publication, has received funding from the European Union’s Horizon 2020 research and innovation programme under the grant numbers 951754 (FCCIS), 654305 (EuroCirCol), 764879 (EASITrain), 730871 (ARIES), 777563 (RI-Paths), 101086276 (EAJADE), 101004730 (iFAST), 101131435 (iSAS), 101131850 (RF2.0) and from FP7 under grant number 312453 (EuCARD-2). This work has also benefited from the support of CHART (Swiss Accelerator Research and Technology), founded in 2016 as an umbrella collaboration for accelerator research and technology activities. Present partners in CHART are CERN, PSI, EPFL, ETH-Zurich and the University of Geneva., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

FCC-hh: the hadron collider: future circular collider conceptual design report volume 3

  • Abada, A.
  • Abbrescia, M.
  • AbdusSalam, S. S.
  • O'Callaghan Castellà, Juan Manuel|||0000-0002-2740-0202
  • Krkotic, Patrick|||0000-0003-1892-0350
In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

HE-LHC: the High-Energy Large Hadron Collider: Future Circular Collider Conceptual Design Report Volume 4

  • Abada, A.
  • Abbrescia, M.
  • AbdusSalam, S. S.
  • O'Callaghan Castellà, Juan Manuel|||0000-0002-2740-0202
  • Krkotic, Patrick|||0000-0003-1892-0350
In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development and properties of high thermal conductivity molybdenum carbide - graphite composites

  • Guardia-Valenzuela, J.
  • Bertarelli, A.
  • Carra, F.
  • Mariani, N.
  • Bizzaro, S.
  • Arenal, R.
A family of novel graphite-based composites reinforced with a dispersion of molybdenum carbide particles, with very high thermal and electrical properties, has been recently developed at CERN, in collaboration with Brevetti Bizz (IT), for applications in particle accelerators. These materials, produced by spark plasma sintering, assisted by liquid phase, have been extensively investigated and characterized. The influence of the initial constituents, together with the sintering parameters, have been studied in view of optimizing the thermo-physical and mechanical properties as well as ultra-high vacuum compatibility. The carbide phases and the microstructures have been analysed. Their excellent thermal conductivity (approaching 800 Wm-1K-1), low thermal expansion and low density make these materials appealing for high-end thermal management applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thin film (high temperature) superconducting radiofrequency cavities for the search of axion dark matter

  • Golm, J.
  • Arguedas Cuendis, S.
  • Calatroni, S.
  • Cogollos, C.
  • Dobrich, B.
  • Gallego, J.D.
  • Garcia Barcelo, J.M.
  • Granados, X.
  • Gutierrez, J.
  • García Irastorza, I.
  • Koettig, T.
  • Lamas, N.
  • Liberadzka-Porret, J.
  • Malbrunot, C.
  • Millar, W.L.
  • Navarro, P.
  • Carlos, C.P.A.
  • Puig, T.
  • Rosaz, G.J.
  • Siodlaczek, M.
  • Telles, G.
  • Wuensch, W.
The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 μ eV. The figure of merit of our detector depends linearly on the quality factor of the cavity and therefore we are researching the possibility of coating our cavities with different superconducting materials to increase the quality factor. Since the experiment operates in strong magnetic fields of 11 T and more, superconductors with high critical magnetic fields are necessary. Suitable materials for this application are for example REBa 2 Cu 3 O 7−x , Nb 3 Sn or NbN. We designed a microwave cavity which resonates at around 9 GHz, with a geometry optimized to facilitate superconducting coating and designed to fit in the bore of available high-field accelerator magnets at CERN. Several prototypes of this cavity were coated with different superconducting materials, employing different coating techniques. These prototypes were characterized in strong magnetic fields at 4.2 K.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

RADES axion search results with a high-temperature superconducting cavity in an 11.7 T magnet

  • Ahyoune, S.
  • Melcón, A. Álvarez
  • Cuendis, S. Arguedas
  • Calatroni, S.
  • Cogollos, C.
  • Díaz-Morcillo, A.
  • Döbrich, B.
  • Gallego, J. D.
  • García-Barceló, J. M.
  • Gimeno, B.
  • Golm, J.
  • Granados, X.
  • Gutierrez, J.
  • Herwig, L.
  • García Irastorza, I.
  • Lamas, N.
  • Lozano-Guerrero, A.
  • Malbrunot, C.
  • Millar, W. L.
  • Miralda-Escudé, J.
  • Navarro, P.
  • Navarro-Madrid, J. R.
  • Puig, T.
  • Siodlaczek, M.
  • Telles, G. T.
  • Wuensch, W.
We describe the results of a haloscope axion search performed with an 11.7 T dipole magnet at CERN. The search used a custom-made radio-frequency cavity coated with high-temperature superconducting tape. A set of 27 h of data at a resonant frequency of around 8.84 GHz was analysed. In the range of axion mass 36.5676 μeV to 36.5699 μeV, corresponding to a width of 554 kHz, no signal excess hinting at an axion-like particle was found. Correspondingly, in this mass range, a limit on the axion to photon coupling-strength was set in the range between gaγ ≳ 6.3 × 10−13 GeV−1 and gaγ ≳ 1.59 × 10−13 GeV−1 with a 95% confidence level.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

HE-LHC: the High-Energy Large Hadron Collider: Future Circular Collider Conceptual Design Report Volume 4

  • Abada, A.
  • Abbrescia, M.
  • AbdusSalam, S. S.
  • O'Callaghan Castellà, Juan Manuel
  • Krkotic, Patrick
In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

FCC-hh: the hadron collider: future circular collider conceptual design report volume 3

  • Abada, A.
  • Abbrescia, M.
  • AbdusSalam, S. S.
  • O'Callaghan Castellà, Juan Manuel
  • Krkotic, Patrick
In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries., Peer Reviewed, Postprint (published version)