Pasar al contenido principal

CINTAS SUPERCONDUCTORAS PARA TECNOLOGIAS EMERGENTES EN ENERGIA LIMPIA Y ALTAS ENERGIAS

PID2021-127297OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal Propionate Solutions for High-Throughput Liquid-Assisted Manufacturing of Superconducting REBaCuO (RE = Y, Gd, Sm, and Yb) Films

  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Sanchez-Rodriguez, Daniel
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Molins Grau, Elies|||0000-0003-1012-0551
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig, Teresa
The cost-effective synthesis of a series of metal propionate powders (copper, yttrium, barium, samarium, gadolinium, and ytterbium) is developed through single chemical reactions resulting in five novel crystalline forms. These complexes are valuable precursors for the preparation of epitaxial REBaCuO (REBCO) superconducting films (here, RE = Y, Sm, Gd, and Yb) through the innovative transient liquid-assisted growth (TLAG) process based on chemical solution deposition (CSD). TLAG-CSD shows impressive results with YBaCuO (YBCO), obtaining critical current densities of 2.6 MA/cm 2 (77 K) on 500 nm films at unprecedented growth rates (50-2000 nm/s), boosting unprecedented high-throughput industrial production. With a cardinal concern on designing the pyrolysis toward optimal nanocrystalline films for TLAG, an analysis of the thermal behavior of the synthesized precursors is essential. Decomposition pathways for each metal propionate are established, and compatibility with TLAG-CSD is corroborated. Metal-organic solutions for these REBCO systems are successfully prepared, and their rheological properties and thermal behavior are analyzed. This work demonstrates homogeneous nanocrystalline films through propionate-based REBCO precursor solutions, including several rare-earth ions, which display exemplary chemical and microstructural characteristics crucial for TLAG, and provides a base for a wide variety of CSD-based functional oxides.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBa2Cu3O7-x Superconducting Films

  • Rasi, Silvia
  • Queraltó, Albert
  • Banchewski, Juri
  • Saltarelli, Lavinia
  • García Franco, Diana
  • Pacheco, Adrià
  • Gupta, Kapil
  • Kethamkuzhi, Aiswarya
  • Soler, Laia
  • Jareño Cerulla, Julia
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBa2 Cu3 O7- x (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm-2 at 77 K and growth rates between 100-2000 nm s-1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964) and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from Spanish Ministry of Science and Innovation with PID2021-127297OB-C21 and PID2021-127297OB-C22, and from Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), and from the Spanish Ministry of Economy and Competitiveness with the SUMATE project (RTI2018-095853-B-C21, RTI2018-095853-B-C22, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE). They also thank the Catalan Government (2017-SGR-1519) and the Catalan energy network XRE4S (2018 XARDI 00002) for their support. L.S., D.G., and A.K. acknowledge financial support from Spanish Ministry of Science, Innovation and Universities through the FPI grant PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.So. and J.J. acknowledge financial support from Spanish Ministry for the FPU grants. S.R. thanks the Universitat de Girona for IFUdG grant and A.Q. thanks the Spanish Ministry of Science, Innovation and Universities (“Juan de la Cierva” postdoctoral fellowship [Grant no. IJC2018-035034-I]). The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza. The authors also acknowledge SOLEIL Synchrotron for provision of synchrotron radiation facilities and are grateful for assistance while using the DiffAbs beamline., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transient liquid assisted growth of superconducting YBa2Cu3O7−x films based on pulsed laser deposition

  • Queraltó, Albert
  • Sieger, Max
  • Gupta, Kapil
  • Meledin, Alexander
  • Barusco, Pedro
  • Saltarelli, Lavinia
  • Palau, Mariona García de
  • Granados, Xavier
  • Obradors, Xavier
  • Puig Molina, Teresa
We investigated the integration of transient liquid-assisted growth (TLAG) approach for epitaxial YBa2Cu3O7−x (YBCO) films by physical deposition methodologies (pulsed laser deposition (PLD)), as an additional opportunity for high-throughput growth of YBCO. As a prerequisite, highly flat and amorphous YBCO precursor films were deposited by PLD at temperatures below 400 °C on single-crystalline SrTiO3 (STO) and LaMnO3 (LMO)/STO, as well as industrial coated conductor architectures. Contrary to TLAG based on chemical solution deposition, where BaCO3 elimination is a key factor for the YBCO growth, TLAG-PLD growth is controlled by the transformation of Ba-Cu-O (s) to a transient liquid. High-quality c-axis YBCO films were successfully grown on different substrates, as demonstrated by high-resolution x-ray diffraction and transmission electron microscopy. In-situ resistance measurements revealed that the growth rates around 1000 nm s−1 can be achieved, outperforming the capabilities of standard PLD growth of REBa2Cu3O7 films by few orders of magnitude. Experimental conditions such as temperature, oxygen partial pressure, and heating ramp, were optimized to obtain critical temperature (T c) values up to 90 K. Critical current densities of 15 MA cm−2 at 5 K and 1.7 MA cm−2 at 77 K were obtained for YBCO films of 450 nm on LMO/STO., The authors acknowledge European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964) and SMS-INKS project (ERC-2022-PoC-101081998), as well as the EU COST actions CA16218 (NANOCOHYBRI), CA20116 (OPERA) and CA21144 (SUPERQUMAP). We also thank financial support from the Spanish Ministry of Economy and Competitiveness, and Spanish Ministry of Science, Innovation and Universities through the 'Severo Ochoa' Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), FUNFUTURE-FIP-2020-DATOPTICON, SUPERENERTECH project (PID2021-127297OB-C21), and SUMATE project (RTI2018-095853-B-C21, co-financed by the European Regional Development Fund). We also acknowledge support from the Catalan Government with 2017-SGR-1519 and the Catalan energy network XRE4S (2018 XARDI 00002). A Q thanks the Spanish Ministry of Science, Innovation and Universities for his 'Juan de la Cierva' postdoctoral fellowship (Grant No. IJC2018-035034-I). L S acknowledges financial support from Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2019-090621. Dr Silvia Rasi and Dr Roxana Vlad are thanked for fruitful discussions. We acknowledge the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. Authors also acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node 'Laboratorio de Microscopías Avanzadas' at University of Zaragoza. SuNAM Co. is acknowledged for providing metallic substrates., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measuring the viscosity of films by thermomechanical analysis: application to metal organic precursor films of functional oxides

  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • López Olmedo, Joan Pere
  • Villarejo, Bohores
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
We have developed a new method to measure the viscosity of micrometric films by thermomechanical analysis with a hemispherical probe of millimetric diameter. The loading curve (displacement vs. time) recorded as the probe tip crosses the whole film at constant load until it touches the substrate is fitted to a theoretical curve shape that has been obtained after solving the problem of liquid flow under the probe tip. The method has been validated by measuring the viscosity of rosin films. It has been applied to analyze the thermal evolution of unstable liquid films that appear on Ba propionate, Ce(III) propionate and a low-fluorine precursor film of YBa2Cu3O6+x. During pyrolysis of the last two films, viscosity first diminishes due to heating and then it increases as solid oxide particles are formed inside the liquid., This work has been partially funded by the Spanish Programa Nacional de Materiales through projects MAT2014-51778-C2-1-R, MAT2014-51778-C2-2-R, RTI2018-095853-B-C21, RTI2018-095853-B-C22, PID2021-127297OB-C21 and PID2021-127297OB-C21, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE and also by the Generalitat de Catalunya contract No. 2017-SGR001519 and by the Universitat de Girona contract No. MPCUdG2016/059. We are indebted to the Serveis Generals de Recerca (SGR) of the University of Girona for the use of the thermal analysis facilities. We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S. We are grateful to Aleix Prat for doing TMA preliminary experiments., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron Beam Characterization of REBCO-Coated Conductors at Cryogenic Conditions

  • Haubner, Michal
  • Krkotić, Patrick
  • Serafim, Catarina
  • Petit, Valentine
  • Baglin, Vincent
  • Calatroni, Sergio
  • Henrist, Bernard
  • Romanov, Artur
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
Particle accelerators with superconducting magnets operating at cryogenic temperatures use a beam screen (BS) liner that extracts heat generated by the circulating bunched charge particle beam before it can reach the magnets. The BS surface, commonly made of high–conductivity copper, provides a low impedance for beam stability reasons, low secondary electron yield (SEY) to mitigate the electron–cloud (EC) effect, and low electron–stimulated desorption yield (ESD) to limit the dynamic pressure rise due to EC. Rare–earth barium copper oxide (REBCO) high–temperature superconductors (HTSs) recently reached technical maturity, are produced as coated conductor tapes (REBCO–CCs), and will be considered for application in future colliders to decrease the BS impedance and enable operation at around 50 K, consequently relaxing the cryogenic requirements. Aside from HTS properties, industry–grade REBCO–CCs also need qualification for EC and dynamic vacuum compatibility under accelerator–like conditions. Hence, we report the SEY and ESD measured at cryogenic temperatures of 12 K under low–energy electron irradiation of 0–1.4 keV. We also verify the sample compositions and morphologies using the XPS, SEM, and EDS methods. The energy and dose dependencies of ESD are comparable to those of technical–grade metals and one sample reached SEY (Formula presented.) = 1.2 after electron conditioning., The authors acknowledge the support from the HL–LHC project and CERN funding FCCGOV–CC-0208 (KE4947/ATS). The authors acknowledge the support and samples provided by Superox and SuNAM. M. Haubner acknowledges partial support from the Czech Technical University in Prague, grant number: SGS21/149/OHK2/3T/12. A. Romanov acknowledges MSCA-COFUND-2016-754397 for the PhD grant. A. Romanov, T. Puig, J. Gutierrez acknowledge funding from PID2021-127297OB-C21 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Field quality and surface resistance studies of a superconducting REBa2Cu3O

_{7-x}—Cu hybrid coating for the FCC beam screen
  • Telles, Guilherme
  • Romanov, Artur
  • Calatroni, Sergio
  • Granados, Xavier
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
To ensure beam stability in the future circular collider study of the European Organization for Nuclear Research, RE(=Y, Gd, Eu)Ba2Cu3O 7 − x high-temperature superconductor was proposed as a low-surface impedance coating for its beam screen. Unfortunately, persistent currents in the superconductor will degrade the magnetic field homogeneity inside the beam chamber, endangering the stability of the beam trajectory. To counteract this effect, we have explored the possibility of using a highly conductive hybrid coating made of Cu and REBa2Cu3O 7 − x . This decreases the surface impedance when compared to that of pure copper, while maintaining high magnetic field quality inside the beam screen chamber. This work formulates guidelines for hybrid coating geometries to comply with the field quality criterion of a circular accelerator during operation with dipole magnets by means of finite elements numerical analysis. We produced hybrid coating samples with compliant geometries via photolithography. Scanning Hall microscopy and radio-frequency characterization have given the first experimental confirmation that these hybrid coatings offer high field quality and present a surface resistance lower than that of copper for the beam screen of the future circular hadron collider. The excellent agreement shown between experimental results and simulations validates that the numerical analysis performed throughout this work can be used as a prediction tool for future proposed geometries., Authors acknowledge the support and samples provided by Bruker HTS GmbH, Fujikura Ltd., Sunam Co., SuperOx, SuperPower Inc. and THEVA Dünnschichttechnik GmbH. Authors acknowledge CERN funding FCCGOV-CC-0208 (KE4947/ATS), RTI2018-095853-B-C21 SuMaTe and PID2021-127297OB-C21 SUPERENERTECH projects from MICINN and co-financing by the European Regional Development Fund; 2017-SGR 1519 from Generalitat de Catalunya and COST Action NANOCOHYBRI (CA16218) from EU. ICMAB authors acknowledge the Center of Excellence award Severo Ochoa CEX2019-000917-S. A R acknowledges MSCA-COFUND-2016-754397 for PhD grant. Authors want to acknowledge Dr M Pont for the fruitful discussion on the evaluation of the multipole coefficients, and Dr M Giovannozzi and Dr E Todesco (from CERN) for the input data regarding the acceptable values. We also want to thank Dr J O'Callaghan and Patrick Krkotić for the co-development of the DR resonator employed in the surface resistance measurements., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Impact of high growth rates on the microstructure and vortex pinning of high-temperature superconducting coated conductors

  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
  • Obradors, Xavier
High-temperature superconducting REBa2Cu3O7 (RE = rare earth or yttrium) coated conductors have emerged as a new class of materials with exceptional physical properties, such as very high critical currents and irreversibility field. Understanding the physics of vortices in these complex materials and controlling of the atomic structure of defects have made it possible to design their performance and achieve exceptional values of superconducting properties which enable their integration into devices. In order to improve performance and reduce costs, faster growth methods are now being explored, which raise new vortex physics scenarios. In this Technical Review, we distinguish the rich vortex pinning microstructure for vapour–solid, solid–solid and liquid–solid growth methods and how it is modified in the fast-growth process. The interplay between vortex physics and defect structure generated at high growth rates is addressed, as well as the implications of the electronic structure on vortex physics., We acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022- PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). We also acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), FUNFUTURE “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019–000917-S) and HTS-JOINTS (PDC2022–133208-I00) and PTI+TransEner CSIC programme for Spanish NGEU. The authors also thank the Catalan Government for 2021 SGR 00440. The access and staff support of several advanced facilities (Soleil and ALBA synchrotrons, INMA and ICN2 electron microscopes, ICMAB scientific services, NHMF Laboratory) are also acknowledged. Many discussions with academic and industrial colleagues and collaborators in the field of coated conductors and vortex pinning are acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Progress in superconducting REBa2Cu3O7 (RE = rare earth) coated conductors derived from fluorinated solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Palau, Anna
  • Coll, Mariona
  • Gutierrez Royo, Joffre 
  • Farjas, Jordi
  • Bartolomé, Elena
In this work, we review recent progress achieved in the use of chemical solution deposition (CSD) based on fluorinated metalorganic precursors to grow superconducting REBa2Cu3O7 (REBCO) films and coated conductors (CCs). We examine, first of all, the advances in optimizing the steps related to the solutions preparation, deposition and pyrolysis based on novel low-fluorine metalorganic solutions. We show that a new type of multifunctional colloidal solutions including preformed nanoparticles (NPs), can be used to introduce artificial pinning centers (APCs). We analyze how to disentangle the complex physico-chemical transformations occurring during the pyrolysis with the purpose of maximizing the film thicknesses. Understanding the nucleation and growth mechanisms is shown to be critical to achieve a fine tuning of the final microstructure, either using the spontaneous segregation or the colloidal solution approaches, and make industrially scalable this process. Advanced nanostructural studies have deeply modified our understanding of the defect structure and its genealogy. It is remarkable the key role played by the high concentration of randomly distributed and oriented BaMO3 (M = Zr, Hf) NPs which enhance the concentration of APCs, such as stacking faults and the associated partial dislocations. Correlating the defect structure with the critical current density Jc (H,T,θ) allows to reach a tight control of the vortex pinning properties and to devise a general scheme of the vortex pinning landscape in the whole H-T phase diagram. We also refer to the outstanding recent achievements in enhancing the vortex pinning strength by shifting the carrier concentration in REBCO films towards the overdoped state, where the pinning energy is maximum and so, record values of critical current densities are achieved. This confirms the performance competitiveness of nanocomposite CCs prepared through the CSD route. We conclude with a short summary of the progress in scaling the CC manufacturing using fluorinated solutions., Authors acknowledge the European Union Research Council for EUROTAPES (EU-FP7-NMP-LA-2012-280432) and FASTGRID (EU-H2020, 721019) projects and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144); the European Research Council for ULTRASUPERTAPE (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998) projects. Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for COACHSUPENERGY project (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R), SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22), SUPERENERTECH (PID2021-127297OB-C21, PID2021-127297OB-C22) and PID2022-138492NB-I00, FUNMAT and FUNFUTURE ICMAB 'Severo Ochoa' Program for Centers of Excellence in R&D (SEV-2015-0496, CEX2019-000917-S) and HTS-JOINTS (PDC2022-133208-I00). They also thank the PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and Catalan Government for 2017 SGR 1519 and 2021 SGR 00440 and that of Aragon for RASMIA (E12-23R)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Normal Zone Propagation Velocity in REBCO Coated Conductors Using an Intermetallic Stabilizer Coating

  • Barusco, Pedro
  • Ben-Saad, Hamda
  • Horn-Bourque, D.
  • Lacroix, Christian
  • Sirois, Frédéric
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
  • Granados, Xavier
  • Obradors, Xavier
The Current Flow Diverter (CFD) is an established concept that has proven to effectively reduce the probability of destructive hot spots by boosting the normal zone propagation velocity (NZPV) in commercial REBa2Cu3O7 (REBCO; RE = Rare Earth) coated conductors (CC). However, incorporating the CFD concept requires finding a scalable method that is also compatible with the already established R2R fabrication process used by CC manufacturers. This study presents a new simple & cost-effective proof-of-concept technique capable of recreating the CFD architecture in commercial CCs coated with silver. The technique is based on promoting a locally controlled thin film diffusion reaction between the silver stabilizer and pure indium. Due to fast diffusion in the Ag-In system, stable Intermetallic Compounds (IMC) are formed throughout the whole thickness of the silver layer reaching the REBCO interface. The presence of Ag-In IMC in the interface safely increases the interfacial resistance (Ω-cm2) by orders of magnitude, thus allowing to safely form the CFD interlayer. Silver-coated tape samples altered using this CFD-IMC have shown an NZPV increase of 5-8x when compared with pristine samples., This work was supported in part by the FASTGRID Project under Grant EUH2020-721019, in part by the Projects SUPERENERTECH under Grant PID2021-127297OB-C21, in part by Spanish Ministry of Economy and Competitiveness which were co-funded by the European Regional Development Fund throughSUMATEunderGrantsRTI2018-095853-BC21 and RTI2018-095853-B-C22, in part by the MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR through SUPERPOWER Project under Grant TED2021-130004B-I00, in part by the Generalitat de Catalunya under Grant 2017-SGR 753, and in part by the COST Action NANOCOHYBRI under Grant CA16218. The work of P. Barusco, T. Puig, X. Granados, J. Guriérrez and X. Obradors was supported by the Center of Excellence Awards Severo Ochoa under Grants SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Bulk MgB2 Superconducting Materials: Technology, Properties, and Applications

  • Prikhna, Tetiana
  • Sokolovsky, Vladimir
  • Moshchil, Viktor
The intensive development of hydrogen technologies has made very promising applications of one of the cheapest and easily produced bulk MgB2-based superconductors. These materials are capable of operating effectively at liquid hydrogen temperatures (around 20 K) and are used as elements in various devices, such as magnets, magnetic bearings, fault current limiters, electrical motors, and generators. These applications require mechanically and chemically stable materials with high superconducting characteristics. This review considers the results of superconducting and structural property studies of MgB2-based bulk materials prepared under different pressure-temperature conditions using different promising methods: hot pressing (30 MPa), spark plasma sintering (16-96 MPa), and high quasi-hydrostatic pressures (2 GPa). Much attention has been paid to the study of the correlation between the manufacturing pressure-temperature conditions and superconducting characteristics. The influence of the amount and distribution of oxygen impurity and an excess of boron on superconducting characteristics is analyzed. The dependence of superconducting characteristics on the various additions and changes in material structure caused by these additions are discussed. It is shown that different production conditions and additions improve the superconducting MgB2 bulk properties for various ranges of temperature and magnetic fields, and the optimal technology may be selected according to the application requirements. We briefly discuss the possible applications of MgB2 superconductors in devices, such as fault current limiters and electric machines., We acknowledge funds from National Academy of Sciences of Ukraine, Project III-7-22 (0785); funds of MICIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), FUNFUTURE “Severo Ochoa” (CEX2019–000917-S); MUGSUP (UCRAN20088) project from CSIC scientific cooperation with Ukraine; Catalan Government 2021 SGR 00440; this work is partially supported by the Australian Academy of Science via A. V. Pan’s grant (STV00021Round1) within Ukraine-Australia Research Fund and the Faculty of Engineering and Information Sciences (University of Wollongong, Australia)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal Propionate Solutions for High-Throughput Liquid-Assisted Manufacturing of Superconducting REBa2Cu3O7-δ (RE = Y, Gd, Sm, and Yb) Films

  • Saltarelli, Lavinia
  • Sanchez Rodríguez, Daniel
  • Gupta, Kapil
  • Kethamkuzhi, Aiswarya
  • Farjas, Jordi
  • Molins, Elies
  • Yáñez, Ramón
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
The cost-effective synthesis of a series of metal propionate powders (copper, yttrium, barium, samarium, gadolinium, and ytterbium) is developed through single chemical reactions resulting in five novel crystalline forms. These complexes are valuable precursors for the preparation of epitaxial REBa2Cu3O7-δ (REBCO) superconducting films (here, RE = Y, Sm, Gd, and Yb) through the innovative transient liquid-assisted growth (TLAG) process based on chemical solution deposition (CSD). TLAG-CSD shows impressive results with YBa2Cu3O7-δ (YBCO), obtaining critical current densities of 2.6 MA/cm2 (77 K) on 500 nm films at unprecedented growth rates (50-2000 nm/s), boosting unprecedented high-throughput industrial production. With a cardinal concern on designing the pyrolysis toward optimal nanocrystalline films for TLAG, an analysis of the thermal behavior of the synthesized precursors is essential. Decomposition pathways for each metal propionate are established, and compatibility with TLAG-CSD is corroborated. Metal-organic solutions for these REBCO systems are successfully prepared, and their rheological properties and thermal behavior are analyzed. This work demonstrates homogeneous nanocrystalline films through propionate-based REBCO precursor solutions, including several rare-earth ions, which display exemplary chemical and microstructural characteristics crucial for TLAG, and provides a base for a wide variety of CSD-based functional oxides., Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094). They also thank the Catalan Government for 2021 SGR 00440. L.S. and A.K. acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities through the FPI grant PRE2019-090621 and PRE2020-091817, respectively. D.S.R. acknowledges the support received from the Beatriu de Pinós Programme and the Ministry of Research and Universities of the Government of Catalonia (Fellowship BP00069). Authors thank the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and Scientific Services at the University of Girona. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Part of the content of this manuscript is object of a European patent, application no. PCT/EP2023/070988 filed on 28/07/2023., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

RADES axion search results with a high-temperature superconducting cavity in an 11.7 T magnet

  • Ahyoune, Saiyd
  • Álvarez Melcón, Alejandro
  • Arguedas Cuendis, S.
  • Calatroni, Sergio
  • Cogollos, Cristian
  • Díaz Morcillo, Alejandro
  • Döbrich, B.
  • Gallego, Juan Daniel
  • García Barceló, José María
  • Gimeno, B.
  • Golm, J.
  • Granados, Xavier
  • Gutierrez Royo, Joffre 
  • Herwig, L.
  • Irastorza, I. G.
  • Lamas, Neil
  • Lozano Guerrero, Antonio José
  • Malbrunot, C.
  • Millar, W. Lee
  • Miralda Escudé, J.
  • Navarro, P.
  • Navarro Madrid, José R.
  • Puig Molina, Teresa
  • Siodlaczek, Marc
  • Telles, Guilherme
  • Wuensch, Walter
We describe the results of a haloscope axion search performed with an 11.7 T dipole magnet at CERN. The search used a custom-made radio-frequency cavity coated with high-temperature superconducting tape. A set of 27 h of data at a resonant frequency of around 8.84 GHz was analysed. In the range of axion mass 36.5676 μeV to 36.5699 μeV, corresponding to a width of 554 kHz, no signal excess hinting at an axion-like particle was found. Correspondingly, in this mass range, a limit on the axion to photon coupling-strength was set in the range between g<inf>aγ</inf> ≳ 6.3 × 10<sup>−13</sup> GeV<sup>−1</sup> and g<inf>aγ</inf> ≳ 1.59 × 10<sup>−13</sup> GeV<sup>−1</sup> with a 95% confidence level., This project has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 730871 (ARIES-TNA). This work has also received funding through the European Research Council under grant ERC-2018-StG-802836 (AxScale). IGI acknowledges funding through the European Research Council under grant ERC-2017-AdG-788781 (IAXO+). This work has been partially funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, under grant PID2019-108122GB-C33, by PID2019108122GB-C32, and by Maria de Maeztu program CEX2019-000918-M. JMGB thanks the grant FPI BES-2017-079787, funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. Generalitat Valenciana has also funded this work under the project ASFAE/2022/013. The authors acknowledge the support and samples provided by THEVA. ICMAB co-authors acknowledges funds from PID2021-127297OB-C21 and CEX2019000917-S, FCC-GOV-CC-0208 (KE4947/ATS) and PRTR-C17I1 from MICIIN-NGEU-Generalitat de Catalunya. We thank Giuseppe Ruoso for the loan of equipment and the CERN teams at SM18 and in the CERN Central Cryogenic Laboratory for the support, particularly: Gerard Willering, Franco Julio Mangiarotti, Jerome Feuvrier, Marta Bajko, Patrick Viret, Guillaume Pichon, Arnaud Devred, Stephan Russenschuck, Andrzej Siemko, Joanna Liberadzka-Porret and Torsten Koettig. This research was supported by Deutsche Forschungsgemeinschaft (DFG) through Grant No. 532766533., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Liquid Composition in the Transient Liquid Assisted Growth of Superconducting YBa2Cu3O7-δ Films

  • Saltarelli, Lavinia
  • García Franco, Diana
  • Soler, Laia
  • Pach, Elzbieta
  • Gupta, Kapil
  • Sánchez Rodríguez, Daniel
  • Aguilar, Jordi
  • Fuentes, Víctor
  • Solano, Eduardo
  • Mocuta, Cristian
  • Farjas, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
The unparalleled loss-less electrical current conduction of high-temperature superconducting (HTS) materials encourages research on YBa2Cu3O7-𝛿 (YBCO) to unravel opportunities toward numerous applications. Nonetheless, production costs and throughput of the commercialized HTS Coated Conductors (CCs) are still limiting a worldwide spread. Transient liquid assisted growth (TLAG) is a non-equilibrium process displaying ultrafast growth rate which, when combined with chemical solution deposition (CSD), is emerging as a strong candidate to reduce the cost/performance ratio of YBCO superconductors. This study explores the influence of the (Ba:Cu) molar ratio of the transient liquid composition on the nucleation and growth mechanisms of TLAG. This enables an in-depth analysis of the critical role of the yttrium supersaturation in the transient liquids considering the out-of-equilibrium kinetic character of TLAG. Advanced characterization techniques, including in situ synchrotron X-ray diffraction, coupled to a multi-parameter analysis of the contributions to the physical performance, elucidate the influence of transient liquid supersaturation as driving force toward YBCO nucleation and growth. Understanding the fundamental role played by the initial ink composition allows to disentangle how to reach high superconducting performance. The fabrication of high-performance YBCO films through this novel, high-throughput growth methodology promotes the use of HTS materials in large scale power applications., Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and REBCOTLAG (PID2021-127297OB-C22). They also thank the Catalan Government for 2021 SGR 00440. L.S. and D.G. acknowledge financial support from Spanish Ministry of Science, Innovation, and Universities through the FPI grant PRE2019-090621 and PRE2018-084537, respectively. D.S.R. acknowledges the support received from the Beatriu de Pinós Programme and the Ministry of Research and Universities of the Government of Catalonia (Fellowship BP00069). E.P. acknowledges the Juan de la Cierva Incorporación Grant IJC2020-045520-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”. Authors thank the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and Scientific Services at the University of Girona. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Moreover, authors acknowledge SOLEIL Synchrotron and ALBA Synchrotron for the provision of radiation facilities and are grateful for the assistance received when conducting experiments at DiffAbs and NCD-SWEET Beamlines., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing photon resilience of REBCO coated conductors under radiation-rich environments

  • Krkotić, Patrick
  • Romanov, Artur
  • Traver, Oriol
  • Tagdulang, Nikki
  • Puig Molina, Teresa
  • Gutierrez, Joffre
  • Lucentini, Ilaria
  • Marini, Carlo
  • Escudero, Carlos
  • Villalobos-Portillo, Edgar Eduardo
  • O’Callaghan, Juan Manuel
  • Calatroni, Sergio
  • Pont, Montserrat
Rare-earth barium copper oxide (REBCO) coated conductors (CCs) are regarded as promising candidates for next-generation superconducting technologies operating in photon-rich environments, such as particle accelerators, fusion reactors, and high-field radio-frequency (RF) systems. Although the effects of ion and neutron irradiation on the superconducting properties of REBCO have been partially investigated, particularly in the context of enhancing vortex pinning, the radiation environments relevant to emerging applications require more thorough studies. This also includes photon-induced degradation, which remains less explored, particularly in the low-energy hard x-ray regime. In this study, the influence of synchrotron-generated photons in the 2–30 keV range on the superconducting performance of commercially available REBCO-CCs is investigated. The evolution of critical current density, critical temperature, and surface impedance is examined through in-situ measurements of DC and RF properties conducted during irradiation at the NOTOS beamline (ALBA Synchrotron). The findings reveal that photon exposure within this energy range showed no evidence of irreversible radiation-induced changes under the conditions tested. At higher power levels, reversible perturbations in superconducting properties were observed, primarily due to thermal effects, underscoring the importance of thermal management. These effects are influenced by the experimental setup and may be mitigated in practical applications by ensuring sufficient thermal contact with a cold sink or through direct cooling using refrigerated gases or liquids. Nevertheless, these results emphasise the importance of considering thermal management and photon-induced effects when implementing REBCO-based systems in radiation-rich environments., We thank the ALBA Synchrotron (Spain) for beamtime at the BL16-NOTOS beamline (proposals 2023017239 and 2023027343). Authors acknowledge the support and samples provided by Fujikura Ltd and SuperOx. This work was supported by CERN under Grants FCC-GOV-CC-0072/KE3358, FCC-GOV-CC-0153/KE4106 and FCC-GOV-CC-0208/KE4947/ATS. N Tagdulang acknowledges MSCA-COFUND-2016-754397 for the PhD Grant. Authors want to acknowledge Dr G Telles and N Lamas for providing the delamination of the samples. ICMAB authors also acknowledge support from Severo Ochoa CEX2023-001263-S and PID2021-127297OB-C21 SUPERENERTECH and TED2021-130004B-I00 SUPERPOWER Projects and European Union (FEDER and NGEU) cofinancing, also from 017-SGR 1519 Project, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electromagnetic simulations for the design of a superconducting REBa2Cu3O7-x–Cu coated beam screen for the CERN future circular hadron collider

  • Telles, Guilherme T.
  • Calatroni, Sergio
  • Giovannozzi, Massimo
  • Granados, Xavier
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
Abstract: In particle accelerators, the beam screen is the device responsible for shielding the superconducting magnets from the synchrotron radiation emitted by the orbiting charged particles. It is crucial to have a low value of the coupling impedance between the beam and the surrounding beam screen to avoid collective instabilities of the charged beams. To achieve this at typical operating temperatures, 40–60K, of the CERN Future Circular hadron Collider, a hybrid coating, made of alternated segments of RE(=Y, Gd, Eu)Ba2Cu3O7-x high-temperature superconductor and Cu, is proposed for the beam screen. Previous studies have shown that such an arrangement can exhibit low surface impedance and, therefore, low beam-coupling impedance, while not hindering the magnetic field quality in the vacuum chamber, which is another relevant factor for accelerator performance. In this work, we propose a design for the beam screen coating and explore its response to the electromagnetic conditions of the FCC-hh. The field disturbance produced by the coating with the high-temperature superconductor is evaluated by means of H-formulation finite elements numerical analysis, considering properties of commercially available HTS coated conductors, such as anisotropy, Jc dependence on the external magnetic field, and flux creep. The coating response to ramping dipole and quadrupole fields is examined, as well as hysteresis effects and creep at constant field over a sustained period of time. Finally, the effects on the field quality experienced by the beam caused by a possible misalignment between the superconducting magnets and the beam screen are investigated., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research leading to these results received funding from CERN under grant number FCCGOV-CC-0208 (KE4947/ATS); from the Spanish Ministry under the Center of Excellence award Severo Ochoa CEX2023-001263-S and PID2021-127297OB-C21 SUPERENERTECH and TED2021–130004B-I00 SUPERPOWER projects from Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación, and cofinanced by the European Union (FEDER and NGEU); from Generalitat de Catalunya under 2017-SGR 1519 project; and from the European Union under COST Action SUPERQUMAP (CA21144)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxygen incorporation in YBa2Cu3O7−δthin films: surface activation and degradation

  • Stangl, Alexander
  • Obradors, Xavier
  • Palau, Anna
  • Badel, Arnaud
  • Puig Molina, Teresa
The oxygen off-stoichiometry plays a pivotal role for the physical properties of superconducting oxides. Yet, there is a lack of knowledge on the fundamental processes of oxygen incorporation and correlated phenomena during oxygen post annealing treatments. Here, we deployed electrical probes (ρ(T) and electrical conductivity relaxation (ECR) measurements) to gain a better understanding of the kinetics of the oxygen reduction reaction (ORR) in epitaxial YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7−δ</inf>(YBCO) thin films. We identified a new indicator for the onset temperature of oxygen incorporation and report for the first time drastic kinetic deactivation in bare YBCO. We demonstrate that surface decoration using silver micro islands both catalytically activates oxygen incorporation and bypasses surface degradation processes. Our results suggest that the ORR in the studied YBCO samples is limited by a surface reaction. Additionally, weak XRD signatures of the formation of extended bulk defects were identified, which have to be considered in the designing of an optimal oxygenation treatment to obtain best performing superconducting YBCO., This work received government funding managed by the French National Research Agency under France 2030, reference number “ANR-24-EXSF-0004”. Authors acknowledge funding from EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144), the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D Matrans42 CEX2023-001263-S. They also thank the Catalan Government for 2021 SGR 00440. Authors also thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Perspectives in power applications of low and mainly high temperature superconductors: energy, transport and industry

  • García-Tabarés, L.
  • Toral, Fernando
  • Munilla, J.
  • González, L.
  • Puig Molina, Teresa
  • Obradors, Xavier
Recent advances in superconducting materials are giving renewed impetus to different power applications, some of which already existed based on previous superconductors with more modest properties while some others have been the symbiosis of new requirements in science and technology and better properties of the new superconductors. This paper constitutes a review of classical and new superconducting materials for power applications (the technological superconductors as they are frequently called) in terms of their structure and their engineering properties (electrical, mechanical and thermal) but also in terms of their manufacturability and scalability for possible scenarios where massive quantities may be required. The second and longer part of the paper is a state of the art of power applications of superconductivity related to energy (generation, transport and transmission), transport (airborne, waterborne and terrestrial) and industrial processes. Practically, all these applications are based on superconducting magnets, which are addressed in the article, including new technologies regarding their design, fabrication and operation. Particularly, these magnets can be the coils of superconducting electrical machines, also described in the paper, where different applications are presented following a scheme of problems to be solved versus the solution provided by superconductivity, including benefits regarding sustainability improvement associated with their better efficiency and power consumption reduction., ICMAB authors acknowledge the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), SUPERPOWER (TED2021-130004B-100), HTS-JOINTS (PDC2022-133208-I00) and FUNFUTURE “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S), EU-COST SUPERQUMAP (CA-21144) and Hi-Scale (CA-19108), the Catalan Government for 2021 SGR 0040 and MATRANS42 (CEX2023-001263-S). CIEMAT authors acknowledge the Spanish Ministry of Science and Innovation for funding MagNext project under 2020 R&D Program, reference PID2020-120582GB-I00, and the PRISMAC program in collaboration with the Spanish Center for Technological and Industrial Development (CDTI) and CERN under contracts KE-3797 and KE-3920. CIEMAT also acknowledges the European Commission for funding the MARES Project (Proposal number 101172746 from the Call HORIZON-CL5-2024-D3-01) and the POSEIDON Project ( Proposal number 101096457 from the call HORIZON-CL5-2022-D5-01)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hall Effect and the Pseudogap in YBa2Cu3O6+x

  • Sobocinski, P. A.
  • de Freitas, O. J.
  • Mesquita, F.
  • Grande, P.
  • Schaf, J.
  • Pureur, P.
  • Puig Molina, Teresa
  • Obradors, Xavier
The Hall effect of several single crystal and thin-film samples of YBa2Cu3O6+x with different carrier concentration was measured in the temperature interval from Tc to T=300K. In this region, the Hall coefficient decreases exponentially with temperature according to a cut-off law where the characteristic parameter closely reproduces the pseudogap line when plotted as a function of the carrier concentration p. The strongly temperature-dependent Hall coefficient is interpreted in terms of the superposition of ordinary and anomalous Hall terms. The anomalous contribution is related to a Griffiths-type antiferromagnetic configuration that forms at the pseudogap line. The coefficients of the ordinary and anomalous terms show a complex dependence on the carrier concentration, suggesting the occurrence of a Fermi surface reconstruction at p≈0.14, where electron-type pockets are supposed to stabilize., PAS, OJF, FM, PG, JS, and PP acknowledge the Brazilian agency “Conselho Nacional de Desenvolvimento Científico e Tecnológico” (CNPq) under grant 402915/2021-6. TP and XO acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21) and FUNFUTURE “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019–000917-S), and the Catalan Government for 2021 SGR 00440., info:eu-repo/grantAgreement/AEI/Plan Estatal de investigación Científica y Técnica y de Innovación 2017-2020/CEX2019-000917-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the overdoping effects in Transient Liquid Assisted Grown YBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] superconducting films

  • Kethamkuzhi, Aiswarya
  • Saltarelli, Lavinia
  • Gupta, Kapil
  • Torres, Carla
  • García, Diana
  • Gutiérrez, Joffre
  • Obradors, Xavier
  • Puig Molina, Teresa
The data that support the findings of this study will be made available at the institutional repository “digital.csic” upon reasonable request., The enhancement of the current-carrying capabilities of cuprate materials depends highly on the knowledge of how to tweak their doping state. The recent efforts on overdoping YBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] (YBCO) to push the limit of critical current density towards the depairing critical current density are also based on the study of their doping state. We present the overdoping study of Transient Liquid Assisted Grown YBCO films through various oxygenation strategies, including oxygen-ozone mixtures and Ag surface-decoration layers. We systematically analyze how the key kinetic parameters, such as temperature, dwell time, ozone concentration, and surface modification, influence the oxygen content and superconducting properties of the films. Our results provide insights into achieving the overdoped regime in TLAG YBCO and offer a comparison with films grown via the Pulsed Laser Deposition (PLD) method. This study of overdoping on the TLAG YBCO films, which compares three distinct oxygenation methods and conducts an unprecedented analysis of the ozone-assisted process, promises a substantial enhancement in REBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] (REBCO, RE = rare earth elements) fabrication., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094). We also acknowledge the funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. We also thank the Catalan Government for 2021 SGR 00440. A.K, L.S, D.G, and C.T would like to acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2020-091817, PRE2019-090621, PRE2018-084537, and PRE2022-102078, respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Superconducting high-power cables and lines—development status and technology roadmap

  • Noe, Mathias
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Laan, D C. van der
  • Dönges, S.A.
  • Weiss. Jeremy
  • Radcliff, Kyle
  • Cheetham, Peter
  • Pamidi, S.
  • Nguyen, Doan
  • Nguyen, L.N .
  • Bach, R.
  • Mansheim, P.
  • Prinz, R.
  • Willen, Dag
  • Alekseev, Alexander
  • McCullough, K.
  • Hodge, E.
  • Ishmael, Sasha
  • Luke, M.
  • Nilsson, E.
  • Rivenc, J.
  • Rouquette, J.F .
  • Ybanez, Ludovic
  • Tassisto, M.
  • Berg, F.
  • Boukayoua, S.
  • Delarche, A.
  • Dunoyer, F.
  • Chaper, C.
  • Kharche, Swapnil
  • Baroille, J.M .
  • Räch, Carsten
  • Reiser, W.
  • Huwer, Stefan
  • Hanebeck, C.
  • Abrell, P.
  • Chikumoto, N.
  • Saugrain, J.M.
  • Allais, Arnaud
  • Ryu, C.H .
  • Lee, J.Y .
  • Cho, J.W.
  • Zong, X.
  • Wang, B.
  • Allweins, K.
  • Herzog, Friedhelm
  • Dioguardi, F.
  • Xiao, L.
  • Qiu, Q.
  • Arndt, T.
  • Palacios, Sebastian
  • Wehr, Mira
  • Wolf, M.J .
  • Bruzek, Christian Eric
  • Marian, Adela
The energy transition requires a tremendous investment in electric grids, mainly due to electrification of heat and mobility sectors and due to the huge expansion of renewable energy. Superconductors offer an extremely high current density while having no resistance. In the past years, the cost-performance of high-temperature superconducting tapes decreased constantly, and the manufacturing capacity was expanded considerably.In parallel, many AC and DC superconducting cables for various applications from low-voltage up to high-voltage levels have been developed, successfully tested and operated in field tests. The availability of the high-temperature superconducting tapes and the increasing need for network expansion result in an increased interest on the development of superconducting cables.In this paper, the most important and most recent R&D activities on superconducting cables are summarized. The paper is structured in four main parts. Firstly, an introduction is given not only on the history of R&D but also on the high-temperature superconducting materials and conductors. The main part shows some selected R&D projects in more detail, while in the third part common issues relevant to all cables like cooling are discussed. The paper ends with contributions to hybrid superconducting cables, where electricity transport is combined with chemical energy carriers like liquid hydrogen.It can be summarized that several projects demonstrated, that superconducting cables can fulfil all technical requirements for a long-term field operation and first permanent installations are realized. Attractive applications for superconducting cables include electric grids, high-current industry bus bars, data centers and aviation., We acknowledge the European Research Council for the ULTRASUPERTAPE Project (ERC-2014-ADG-669504), IMPACT Project (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). We also acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), SUPERPOWER (TED2021-130004B-I00), ‘Severo Ochoa’ Program for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-SCEX), HTS-JOINTS (PDC2022–133208-I00) and PTI + TransEner CSIC programme for Spanish NGEU. The authors also thank the Catalan Government for 2021 SGR 00440., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Screening of REBCO Superconducting Thin Films Fabricated Via Combinatorial Inkjet Printing and TLAG Process

  • Ghiara, Emma
  • Wu, Zeyu
  • Voulhoux, Mahel
  • Mola Bertran, Ona
  • Bertini, Vittorio
  • Torres, Carla
  • Kethamkuzhi, Aiswarya
  • Telles, Guilherme Theophilo
  • Fuentes, Victor
  • Pach, Elzbieta
  • Pop, Cornelia
  • Solano, Eduardo
  • Gupta, Kapil
  • Kiss, Takanobu
  • Obradors, Xavier
  • Puig Molina, Teresa
High-throughput screening has revolutionized material design, enabling the accelerated development and optimization of materials through data-driven approaches. This study employs drop-on-demand inkjet printing to fabricate combinatorial superconducting (Formula presented.) (REBCO, (Formula presented.)) thin films with a controlled compositional gradient, allowing a systematic investigation of Rare Earth composition effects on the Transient Liquid Assisted Growth (TLAG) process. A methodological framework is established for fabricating and characterizing combinatorial REBCO thin films. Automated and synchrotron-based techniques—including Interferometry, EDX, XRD, and Scanning Hall Probe Microscopy (SHPM)—are used to build comprehensive property maps, revealing composition-driven variations in crystal growth and superconducting properties. Furthermore, SEM and STEM confirm REBCO crystal quality and provide deeper material insights at specific combinatorial sample locations. This framework also lays the groundwork for integrating machine learning approaches into the understanding of the TLAG process and predicting the final quality of REBCO superconductive thin films. By bridging combinatorial synthesis, advanced characterization, and data-driven analysis, this study establishes a workflow that can be leveraged in the future to facilitate the scaling-up of TLAG technology for industrial applications., The authors acknowledge funding from the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749), and SMS-INKS (ERC-2022-PoC-101081998), as well as from the EU COST Actions OPERA (CA20116) and SUPERQUMAP (CA21144). Financial support from the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (MICIU/AEI/10.13039/501100011033/FEDER, UE) is also acknowledged for the projects SUPERENERTECH (PID2021-127297OB-C21), the “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and MATRANS42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00). Additional support was provided by the PTI+ TransEner CSIC program under the Spanish NGEU initiative (Regulation (EU) 2020/2094). This project was supported by two doctoral fellowships awarded to E.G. and M.V. from the “la Caixa” Banking Foundation (ID 100010434), under fellowship codes LCF/BQ/DI23/11990065 and LCF/BQ/DFI25/13000042, respectively. A.K. and C.T would like to acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2020-091817 and PRE2022-102078, respectively. E.P. acknowledges the Juan de la Cierva Incorporación Grant IJC2020-045520-I funded by Spanish Ministry of Science, Innovation and Universities and by European Union NextGenerationEU/PRTR. The authors thank the Scientific Services at ICMAB and ICN2 for their technical assistance. They also acknowledge the use of instrumentation and support provided by the Joint Electron Microscopy Center at ALBA (JEMCA), as well as funding from Grant IU16-014206 (METCAM-FIB) to ICN2, funded by the European Regional Development Fund with support from the Ministry of Research and Universities, Generalitat de Catalunya. Finally, the authors acknowledge the ALBA Synchrotron for the provision of beamtime and technical assistance at the NCD-SWEET beamline. Special thanks are given to Maximilian Wolf (AIT Austrian Institute of Technology) for insightful discussions regarding the EDX measurements. The authors acknowledge the use of OpenAI's ChatGPT to assist with language editing and phrasing improvements. No part of the analysis, data interpretation, or scientific conclusions was generated by the tool., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing photon resilience of REBCO coated conductors under radiation-rich environments

  • Krkotic, Patrick|||0000-0003-1892-0350
  • Romanov, Artur
  • Traver Ramos, Oriol
  • Tagdulang, Nikki|||0000-0002-6248-0906
  • Puig Molina, Teresa
  • Gutiérrez Royo, Joffre
  • Lucentini, Ilaria|||0000-0003-1311-9062
  • Marini, Carlo
  • Escudero, Carlos
  • Villalobos Portillo, Edgar Eduardo
  • O'Callaghan Castellà, Juan Manuel|||0000-0002-2740-0202
  • Calatroni, Sergio
  • Pont, Montserrat
Rare-earth barium copper oxide (REBCO) coated conductors (CCs) are regarded as promising candidates for next-generation superconducting technologies operating in photon-rich environments, such as particle accelerators, fusion reactors, and high-field radio-frequency (RF) systems. Although the effects of ion and neutron irradiation on the superconducting properties of REBCO have been partially investigated, particularly in the context of enhancing vortex pinning, the radiation environments relevant to emerging applications require more thorough studies. This also includes photon-induced degradation, which remains less explored, particularly in the low-energy hard x-ray regime. In this study, the influence of synchrotron-generated photons in the 2–30 keV range on the superconducting performance of commercially available REBCO-CCs is investigated. The evolution of critical current density, critical temperature, and surface impedance is examined through in-situ measurements of DC and RF properties conducted during irradiation at the NOTOS beamline (ALBA Synchrotron). The findings reveal that photon exposure within this energy range showed no evidence of irreversible radiation-induced changes under the conditions tested. At higher power levels, reversible perturbations in superconducting properties were observed, primarily due to thermal effects, underscoring the importance of thermal management. These effects are influenced by the experimental setup and may be mitigated in practical applications by ensuring sufficient thermal contact with a cold sink or through direct cooling using refrigerated gases or liquids. Nevertheless, these results emphasise the importance of considering thermal management and photon-induced effects when implementing REBCO-based systems in radiation-rich environments., We thank the ALBA Synchrotron (Spain) for beamtime at the BL16-NOTOS beamline (proposals 2023017239 and 2023027343). Authors acknowledge the support and samples provided by Fujikura Ltd and SuperOx. This work was supported by CERN under Grants FCC-GOV-CC0072/KE3358, FCC-GOV-CC-0153/KE4106 and FCC-GOVCC-0208/KE4947/ATS. N Tagdulang acknowledges MSCACOFUND-2016-754397 for the PhD Grant. Authors want to acknowledge Dr G Telles and N Lamas for providing the delamination of the samples. ICMAB authors also acknowledge support from Severo Ochoa CEX2023- 001263-S and PID2021-127297OB-C21 SUPERENERTECH and TED2021-130004B-I00 SUPERPOWER Projects and European Union (FEDER and NGEU) cofinancing, also from 017-SGR 1519 Project., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing photon resilience of REBCO coated conductors under radiation-rich environments

  • Krkotic, Patrick
  • Romanov, Artur
  • Traver Ramos, Oriol
  • Tagdulang, Nikki
  • Puig Molina, Teresa
  • Gutiérrez Royo, Joffre
  • Lucentini, Ilaria
  • Marini, Carlo
  • Escudero, Carlos
  • Villalobos Portillo, Edgar Eduardo
  • O'Callaghan Castellà, Juan Manuel
  • Calatroni, Sergio
  • Pont, Montserrat
Rare-earth barium copper oxide (REBCO) coated conductors (CCs) are regarded as promising candidates for next-generation superconducting technologies operating in photon-rich environments, such as particle accelerators, fusion reactors, and high-field radio-frequency (RF) systems. Although the effects of ion and neutron irradiation on the superconducting properties of REBCO have been partially investigated, particularly in the context of enhancing vortex pinning, the radiation environments relevant to emerging applications require more thorough studies. This also includes photon-induced degradation, which remains less explored, particularly in the low-energy hard x-ray regime. In this study, the influence of synchrotron-generated photons in the 2–30 keV range on the superconducting performance of commercially available REBCO-CCs is investigated. The evolution of critical current density, critical temperature, and surface impedance is examined through in-situ measurements of DC and RF properties conducted during irradiation at the NOTOS beamline (ALBA Synchrotron). The findings reveal that photon exposure within this energy range showed no evidence of irreversible radiation-induced changes under the conditions tested. At higher power levels, reversible perturbations in superconducting properties were observed, primarily due to thermal effects, underscoring the importance of thermal management. These effects are influenced by the experimental setup and may be mitigated in practical applications by ensuring sufficient thermal contact with a cold sink or through direct cooling using refrigerated gases or liquids. Nevertheless, these results emphasise the importance of considering thermal management and photon-induced effects when implementing REBCO-based systems in radiation-rich environments., We thank the ALBA Synchrotron (Spain) for beamtime at the BL16-NOTOS beamline (proposals 2023017239 and 2023027343). Authors acknowledge the support and samples provided by Fujikura Ltd and SuperOx. This work was supported by CERN under Grants FCC-GOV-CC0072/KE3358, FCC-GOV-CC-0153/KE4106 and FCC-GOVCC-0208/KE4947/ATS. N Tagdulang acknowledges MSCACOFUND-2016-754397 for the PhD Grant. Authors want to acknowledge Dr G Telles and N Lamas for providing the delamination of the samples. ICMAB authors also acknowledge support from Severo Ochoa CEX2023- 001263-S and PID2021-127297OB-C21 SUPERENERTECH and TED2021-130004B-I00 SUPERPOWER Projects and European Union (FEDER and NGEU) cofinancing, also from 017-SGR 1519 Project., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBaCuO-x Superconducting Films

  • Rasi, Silvia|||0000-0003-4935-3918
  • Queraltó, Albert
  • Banchewski, Juri|||0000-0002-6654-5527
  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Garcia, Diana
  • Pacheco Aceña, Adrià
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Ricart, Susagna
  • Farjas, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBaCuO (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm -2 at 77 K and growth rates between 100-2000 nm s -1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods. Transient liquid assisted growth (TLAG) is an ultrafast, non-equilibrium growth process governed by kinetic parameters, accessible only through fast in situ characterizations. These methods are used to build kinetic diagrams of phase evolution and growth rate which are unique guides to reach the conditions for ultrafast growth (>1000 nm s - 1) and high-performance superconducting films by combining kinetic and thermodynamic parameters.