Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Performance of Superconducting YBa2Cu3O7 Thick Films Prepared by Single-Deposition Inkjet Printing

  • Villarejo, Bohores
  • Pino, Flavio
  • Pop, Cornelia
  • Ricart, Susagna
  • Vallés, Ferran
  • Mundet, Bernat
  • Palau, Anna
  • Roura, Pere
  • Farjas, Jordi
  • Chamorro, Natalia
  • Yáñez, Ramón
  • Granados, Xavier
  • Puig Molina, Teresa
  • Obradors, Xavier
Inkjet printing (IJP) is a very appealing cost-effective deposition technique to achieve large-area solution-derived functional films. For many applications, it is very challenging to increase the film thickness in order to achieve competitive performance, for instance, high critical currents in superconducting films. In this paper, the preparation of superconducting YBa2Cu3O7 thick films (∼1.1 μm) using a single deposition is reported. Specific rules for ink design, deposition protocols, and pyrolysis processes are provided. The most important aspect is to formulate an ink with a solvent having a high boiling point that keeps the whole film wet during deposition to avoid liquid movement due to coffee-ring effects. An additional success has been to modify the ink with a photocurable polyacrylic ester varnish which after polymerization with a UV LED lamp helps keep homogeneous thickness. This varnish also helped avoid the generation of film instabilities (wrinkling or cracking) during pyrolysis. Homogeneous pyrolyzed thick films are transformed into epitaxial thick films with high critical currents. The IJP process is shown to be valid to prepare nanocomposite films using colloidal inks including pre-prepared BaZrO3 nanoparticles. The nanocomposite thick films display enhanced vortex pinning, thus keeping high critical currents under high magnetic fields., The authors acknowledge the EUROTAPES project (EU-FP7 NMP-LA-2012-280432), COACHSUPENERGY (MAT2014- 51778-C2-1-R and MAT2014-51778-C2-2-R), SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) cofinanced by the European Regional Development Fund and SUPERINKS (RTC-2015-3840-S) from MINECO (cofinanced by the European Regional Development Fund), 2017-SGR 753 from Generalitat de Catalunya, and COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence awards Severo Ochoa SEV2015-0496 and CEX2019-000917-S. The authors acknowledge the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and LMA-INA from Aragon. They also acknowledge KAO Chimigraf for providing varnishes and Bruker HTS for providing metallic substrates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Normal Zone Propagation Velocity in REBCO Coated Conductors Using an Intermetallic Stabilizer Coating

  • Barusco, Pedro
  • Ben-Saad, Hamda
  • Horn-Bourque, D.
  • Lacroix, Christian
  • Sirois, Frédéric
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
  • Granados, Xavier
  • Obradors, Xavier
The Current Flow Diverter (CFD) is an established concept that has proven to effectively reduce the probability of destructive hot spots by boosting the normal zone propagation velocity (NZPV) in commercial REBa2Cu3O7 (REBCO; RE = Rare Earth) coated conductors (CC). However, incorporating the CFD concept requires finding a scalable method that is also compatible with the already established R2R fabrication process used by CC manufacturers. This study presents a new simple & cost-effective proof-of-concept technique capable of recreating the CFD architecture in commercial CCs coated with silver. The technique is based on promoting a locally controlled thin film diffusion reaction between the silver stabilizer and pure indium. Due to fast diffusion in the Ag-In system, stable Intermetallic Compounds (IMC) are formed throughout the whole thickness of the silver layer reaching the REBCO interface. The presence of Ag-In IMC in the interface safely increases the interfacial resistance (Ω-cm2) by orders of magnitude, thus allowing to safely form the CFD interlayer. Silver-coated tape samples altered using this CFD-IMC have shown an NZPV increase of 5-8x when compared with pristine samples., This work was supported in part by the FASTGRID Project under Grant EUH2020-721019, in part by the Projects SUPERENERTECH under Grant PID2021-127297OB-C21, in part by Spanish Ministry of Economy and Competitiveness which were co-funded by the European Regional Development Fund throughSUMATEunderGrantsRTI2018-095853-BC21 and RTI2018-095853-B-C22, in part by the MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR through SUPERPOWER Project under Grant TED2021-130004B-I00, in part by the Generalitat de Catalunya under Grant 2017-SGR 753, and in part by the COST Action NANOCOHYBRI under Grant CA16218. The work of P. Barusco, T. Puig, X. Granados, J. Guriérrez and X. Obradors was supported by the Center of Excellence Awards Severo Ochoa under Grants SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed