Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Normal Zone Propagation Velocity in REBCO Coated Conductors Using an Intermetallic Stabilizer Coating

  • Barusco, Pedro
  • Ben-Saad, Hamda
  • Horn-Bourque, D.
  • Lacroix, Christian
  • Sirois, Frédéric
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
  • Granados, Xavier
  • Obradors, Xavier
The Current Flow Diverter (CFD) is an established concept that has proven to effectively reduce the probability of destructive hot spots by boosting the normal zone propagation velocity (NZPV) in commercial REBa2Cu3O7 (REBCO; RE = Rare Earth) coated conductors (CC). However, incorporating the CFD concept requires finding a scalable method that is also compatible with the already established R2R fabrication process used by CC manufacturers. This study presents a new simple & cost-effective proof-of-concept technique capable of recreating the CFD architecture in commercial CCs coated with silver. The technique is based on promoting a locally controlled thin film diffusion reaction between the silver stabilizer and pure indium. Due to fast diffusion in the Ag-In system, stable Intermetallic Compounds (IMC) are formed throughout the whole thickness of the silver layer reaching the REBCO interface. The presence of Ag-In IMC in the interface safely increases the interfacial resistance (Ω-cm2) by orders of magnitude, thus allowing to safely form the CFD interlayer. Silver-coated tape samples altered using this CFD-IMC have shown an NZPV increase of 5-8x when compared with pristine samples., This work was supported in part by the FASTGRID Project under Grant EUH2020-721019, in part by the Projects SUPERENERTECH under Grant PID2021-127297OB-C21, in part by Spanish Ministry of Economy and Competitiveness which were co-funded by the European Regional Development Fund throughSUMATEunderGrantsRTI2018-095853-BC21 and RTI2018-095853-B-C22, in part by the MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR through SUPERPOWER Project under Grant TED2021-130004B-I00, in part by the Generalitat de Catalunya under Grant 2017-SGR 753, and in part by the COST Action NANOCOHYBRI under Grant CA16218. The work of P. Barusco, T. Puig, X. Granados, J. Guriérrez and X. Obradors was supported by the Center of Excellence Awards Severo Ochoa under Grants SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing photon resilience of REBCO coated conductors under radiation-rich environments

  • Krkotić, Patrick
  • Romanov, Artur
  • Traver, Oriol
  • Tagdulang, Nikki
  • Puig Molina, Teresa
  • Gutierrez, Joffre
  • Lucentini, Ilaria
  • Marini, Carlo
  • Escudero, Carlos
  • Villalobos-Portillo, Edgar Eduardo
  • O’Callaghan, Juan Manuel
  • Calatroni, Sergio
  • Pont, Montserrat
Rare-earth barium copper oxide (REBCO) coated conductors (CCs) are regarded as promising candidates for next-generation superconducting technologies operating in photon-rich environments, such as particle accelerators, fusion reactors, and high-field radio-frequency (RF) systems. Although the effects of ion and neutron irradiation on the superconducting properties of REBCO have been partially investigated, particularly in the context of enhancing vortex pinning, the radiation environments relevant to emerging applications require more thorough studies. This also includes photon-induced degradation, which remains less explored, particularly in the low-energy hard x-ray regime. In this study, the influence of synchrotron-generated photons in the 2–30 keV range on the superconducting performance of commercially available REBCO-CCs is investigated. The evolution of critical current density, critical temperature, and surface impedance is examined through in-situ measurements of DC and RF properties conducted during irradiation at the NOTOS beamline (ALBA Synchrotron). The findings reveal that photon exposure within this energy range showed no evidence of irreversible radiation-induced changes under the conditions tested. At higher power levels, reversible perturbations in superconducting properties were observed, primarily due to thermal effects, underscoring the importance of thermal management. These effects are influenced by the experimental setup and may be mitigated in practical applications by ensuring sufficient thermal contact with a cold sink or through direct cooling using refrigerated gases or liquids. Nevertheless, these results emphasise the importance of considering thermal management and photon-induced effects when implementing REBCO-based systems in radiation-rich environments., We thank the ALBA Synchrotron (Spain) for beamtime at the BL16-NOTOS beamline (proposals 2023017239 and 2023027343). Authors acknowledge the support and samples provided by Fujikura Ltd and SuperOx. This work was supported by CERN under Grants FCC-GOV-CC-0072/KE3358, FCC-GOV-CC-0153/KE4106 and FCC-GOV-CC-0208/KE4947/ATS. N Tagdulang acknowledges MSCA-COFUND-2016-754397 for the PhD Grant. Authors want to acknowledge Dr G Telles and N Lamas for providing the delamination of the samples. ICMAB authors also acknowledge support from Severo Ochoa CEX2023-001263-S and PID2021-127297OB-C21 SUPERENERTECH and TED2021-130004B-I00 SUPERPOWER Projects and European Union (FEDER and NGEU) cofinancing, also from 017-SGR 1519 Project, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electromagnetic simulations for the design of a superconducting REBa2Cu3O7-x–Cu coated beam screen for the CERN future circular hadron collider

  • Telles, Guilherme T.
  • Calatroni, Sergio
  • Giovannozzi, Massimo
  • Granados, Xavier
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
Abstract: In particle accelerators, the beam screen is the device responsible for shielding the superconducting magnets from the synchrotron radiation emitted by the orbiting charged particles. It is crucial to have a low value of the coupling impedance between the beam and the surrounding beam screen to avoid collective instabilities of the charged beams. To achieve this at typical operating temperatures, 40–60K, of the CERN Future Circular hadron Collider, a hybrid coating, made of alternated segments of RE(=Y, Gd, Eu)Ba2Cu3O7-x high-temperature superconductor and Cu, is proposed for the beam screen. Previous studies have shown that such an arrangement can exhibit low surface impedance and, therefore, low beam-coupling impedance, while not hindering the magnetic field quality in the vacuum chamber, which is another relevant factor for accelerator performance. In this work, we propose a design for the beam screen coating and explore its response to the electromagnetic conditions of the FCC-hh. The field disturbance produced by the coating with the high-temperature superconductor is evaluated by means of H-formulation finite elements numerical analysis, considering properties of commercially available HTS coated conductors, such as anisotropy, Jc dependence on the external magnetic field, and flux creep. The coating response to ramping dipole and quadrupole fields is examined, as well as hysteresis effects and creep at constant field over a sustained period of time. Finally, the effects on the field quality experienced by the beam caused by a possible misalignment between the superconducting magnets and the beam screen are investigated., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research leading to these results received funding from CERN under grant number FCCGOV-CC-0208 (KE4947/ATS); from the Spanish Ministry under the Center of Excellence award Severo Ochoa CEX2023-001263-S and PID2021-127297OB-C21 SUPERENERTECH and TED2021–130004B-I00 SUPERPOWER projects from Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación, and cofinanced by the European Union (FEDER and NGEU); from Generalitat de Catalunya under 2017-SGR 1519 project; and from the European Union under COST Action SUPERQUMAP (CA21144)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Superconducting high-power cables and lines—development status and technology roadmap

  • Noe, Mathias
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Laan, D C. van der
  • Dönges, S.A.
  • Weiss. Jeremy
  • Radcliff, Kyle
  • Cheetham, Peter
  • Pamidi, S.
  • Nguyen, Doan
  • Nguyen, L.N .
  • Bach, R.
  • Mansheim, P.
  • Prinz, R.
  • Willen, Dag
  • Alekseev, Alexander
  • McCullough, K.
  • Hodge, E.
  • Ishmael, Sasha
  • Luke, M.
  • Nilsson, E.
  • Rivenc, J.
  • Rouquette, J.F .
  • Ybanez, Ludovic
  • Tassisto, M.
  • Berg, F.
  • Boukayoua, S.
  • Delarche, A.
  • Dunoyer, F.
  • Chaper, C.
  • Kharche, Swapnil
  • Baroille, J.M .
  • Räch, Carsten
  • Reiser, W.
  • Huwer, Stefan
  • Hanebeck, C.
  • Abrell, P.
  • Chikumoto, N.
  • Saugrain, J.M.
  • Allais, Arnaud
  • Ryu, C.H .
  • Lee, J.Y .
  • Cho, J.W.
  • Zong, X.
  • Wang, B.
  • Allweins, K.
  • Herzog, Friedhelm
  • Dioguardi, F.
  • Xiao, L.
  • Qiu, Q.
  • Arndt, T.
  • Palacios, Sebastian
  • Wehr, Mira
  • Wolf, M.J .
  • Bruzek, Christian Eric
  • Marian, Adela
The energy transition requires a tremendous investment in electric grids, mainly due to electrification of heat and mobility sectors and due to the huge expansion of renewable energy. Superconductors offer an extremely high current density while having no resistance. In the past years, the cost-performance of high-temperature superconducting tapes decreased constantly, and the manufacturing capacity was expanded considerably.In parallel, many AC and DC superconducting cables for various applications from low-voltage up to high-voltage levels have been developed, successfully tested and operated in field tests. The availability of the high-temperature superconducting tapes and the increasing need for network expansion result in an increased interest on the development of superconducting cables.In this paper, the most important and most recent R&D activities on superconducting cables are summarized. The paper is structured in four main parts. Firstly, an introduction is given not only on the history of R&D but also on the high-temperature superconducting materials and conductors. The main part shows some selected R&D projects in more detail, while in the third part common issues relevant to all cables like cooling are discussed. The paper ends with contributions to hybrid superconducting cables, where electricity transport is combined with chemical energy carriers like liquid hydrogen.It can be summarized that several projects demonstrated, that superconducting cables can fulfil all technical requirements for a long-term field operation and first permanent installations are realized. Attractive applications for superconducting cables include electric grids, high-current industry bus bars, data centers and aviation., We acknowledge the European Research Council for the ULTRASUPERTAPE Project (ERC-2014-ADG-669504), IMPACT Project (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). We also acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), SUPERPOWER (TED2021-130004B-I00), ‘Severo Ochoa’ Program for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-SCEX), HTS-JOINTS (PDC2022–133208-I00) and PTI + TransEner CSIC programme for Spanish NGEU. The authors also thank the Catalan Government for 2021 SGR 00440., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed