Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal Propionate Solutions for High-Throughput Liquid-Assisted Manufacturing of Superconducting REBaCuO (RE = Y, Gd, Sm, and Yb) Films

  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Sanchez-Rodriguez, Daniel
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Molins Grau, Elies|||0000-0003-1012-0551
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig, Teresa
The cost-effective synthesis of a series of metal propionate powders (copper, yttrium, barium, samarium, gadolinium, and ytterbium) is developed through single chemical reactions resulting in five novel crystalline forms. These complexes are valuable precursors for the preparation of epitaxial REBaCuO (REBCO) superconducting films (here, RE = Y, Sm, Gd, and Yb) through the innovative transient liquid-assisted growth (TLAG) process based on chemical solution deposition (CSD). TLAG-CSD shows impressive results with YBaCuO (YBCO), obtaining critical current densities of 2.6 MA/cm 2 (77 K) on 500 nm films at unprecedented growth rates (50-2000 nm/s), boosting unprecedented high-throughput industrial production. With a cardinal concern on designing the pyrolysis toward optimal nanocrystalline films for TLAG, an analysis of the thermal behavior of the synthesized precursors is essential. Decomposition pathways for each metal propionate are established, and compatibility with TLAG-CSD is corroborated. Metal-organic solutions for these REBCO systems are successfully prepared, and their rheological properties and thermal behavior are analyzed. This work demonstrates homogeneous nanocrystalline films through propionate-based REBCO precursor solutions, including several rare-earth ions, which display exemplary chemical and microstructural characteristics crucial for TLAG, and provides a base for a wide variety of CSD-based functional oxides.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Melting temperature of YBa2Cu3O7-x and GdBa2Cu3O7-x at subatmospheric partial pressure

  • Taïr, Fadila
  • Carreras, Laura
  • Camps, Jaume
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Calleja Lázaro, Alberto
  • Puig Molina, Teresa
  • Obradors, Xavier
The melting temperature, Tm, of YBa2Cu3O7 x and GdBa2Cu3O7 x superconductor ceramic compounds has been measured by differential thermal analysis (DTA) over a large oxygen partial pressure range of five orders of magnitude (2$10 5 < PO2 < 1 bar). It is shown that the DTA peak and endset temperatures are closer to Tm than the onset temperature. Correct measurement of Tm requires low heating rates and subatmospheric pressure conditions to avoid temperature shifts due to local oxygen overpressure and kinetic effects., This work was funded by the Spanish Programa Nacional de Materiales through projects MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R. We also acknowledge: the Center of Excellence award Severo Ochoa SEV-2015-0496, SGR753 and SGR948 from the Generalitat of Catalunya and European Union through projects Eurotapes (EU-FP7 NMP-LA-2012-280432) and Ultrasupertape (ERC ADG-2014-669504). FT acknowledges financial support from USTO. The authors are indebted to Dr. Joan Pere López Olmedo and Dr. Xavier Fontrodona of STR, University of Girona, for their technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing localized strain in solution-derived YBa2Cu3O7−δ nanocomposite thin films

  • Guzmán, Roger
  • Gázquez, Jaume
  • Mundet, Bernat
  • Coll, Mariona
  • Obradors, Xavier
  • Puig Molina, Teresa
Enhanced pinning due to nanoscale strain is unique to the high-Tc cuprates, where pairing may be modified with lattice distortion. Therefore a comprehensive understanding of the defect landscape is required for a broad range of applications. However, determining the type and distribution of defects and their associated strain constitutes a critical task, and for this aim, real-space techniques for atomic resolution characterization are necessary. Here, we use scanning transmission electron microscopy (STEM) to study the atomic structure of individual defects of solution-derived YBa2Cu3O7 (YBCO) nanocomposites, where the inclusion of incoherent secondary phase nanoparticles within the YBCO matrix dramatically increases the density of Y1Ba2Cu4O8 (Y124) intergrowths, the commonest defect in YBCO thin films. The formation of the Y124 is found to trigger a concatenation of strain-derived interactions with other defects and the concomitant nucleation of intrinsic defects, which weave a web of randomly distributed nanostrained regions that profoundly transform the vortex-pinning landscape of the YBCO nanocomposite thin films., Authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), European Research Council Advanced Grant Award ERC-2014-ADG-669504, and from the Catalan Government with 2014-SGR-753 and Xarmae. J.G. and M.C. acknowledge Ramon y Cajal Program (RyC-2012- 11709 and RYC-2013-12448, respectively). The microscopy work were conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon - Universidad de Zaragoza (Zaragoza, Spain). Authors acknowledge the LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Untangling surface oxygen exchange effects in YBa2Cu3O6+x thin films by electrical conductivity relaxation

  • Cayado, Pablo
  • Sánchez Valdés, César Fidel
  • Stangl, Alexander
  • Coll, Mariona
  • Roura Grabulosa, Pere
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
The kinetics of oxygen incorporation (in-diffusion process) and excorporation (out-diffusion process), in YBa2Cu3O6+x (YBCO) epitaxial thin films prepared using the chemical solution deposition (CSD) methodology by the trifluoroacetate route, was investigated by electrical conductivity relaxation measurements. We show that the oxygenation kinetics of YBCO films is limited by the surface exchange process of oxygen molecules prior to bulk diffusion into the films. The analysis of the temperature and oxygen partial pressure influence on the oxygenation kinetics has drawn a consistent picture of the oxygen surface exchange process enabling us to define the most likely rate determining step. We have also established a strategy to accelerate the oxygenation kinetics at low temperatures based on the catalytic influence of Ag coatings thus allowing us to decrease the oxygenation temperature in the YBCO thin films., The authors acknowledge the MICIN (NANOSELECT, CSD2007- 00041 and MAT2014-51778-C2-1-R and C2-2-R), Generalitat de Catalunya (2014SGR 753 and Xarmae), the EU (EU-FP7 NMP-LA- 2012-280432 EUROTAPES project, Cost Action MP1201) and ERC ADG-2014-669504. M. C. is grateful to the MINECO for the ‘‘Ramon y Cajal’’ contract RYC-2013-12448. We also acknowledge the MINECO for the Center of Excellence award Severo Ochoa (SEV-2015-0496). C. F. Sa´nchez-Valde´s acknowledges the support received from CSIC under JAE-Predoctorals program. We also acknowledge useful discussions with Dr S. Ricart, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable Self-Assembly of YF3 Nanoparticles by Citrate-Mediated Ionic Bridges

  • Martínez Esaín, Jordi
  • Faraudo, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Ros, Josep
  • Ricart, Susagna
  • Yáñez, Ramón
Ligand-to-surface interactions are critical factors in surface and interface chemistry to control the mechanisms governing nanostructured colloidal suspensions. In particular, molecules containing carboxylate moieties (such as citrate anions) have been extensively investigated to stabilize metal, metal oxide, and metal fluoride nanoparticles. Using YF3 nanoparticles as a model system, we show here the self-assembly of citrate-stabilized nanostructures (supraparticles) with a size tunable by temperature. Results from several experimental techniques and molecular dynamics simulations show that the self-assembly of nanoparticles into supraparticles is due to ionic bridges between different nanoparticles. These interactions were caused by cations (e.g., ammonium) strongly adsorbed onto the nanoparticle surface that also interact strongly with nonbonded citrate anions, creating ionic bridges in solution between nanoparticles. Experimentally, we observe self-assembly of nanoparticles into supraparticles at 25 and 100 °C. Interestingly, at high temperatures (100 °C), this citrate-bridge self-assembly mechanism is more efficient, giving rise to larger supraparticles. At low temperatures (5 °C), this mechanism is not observed, and nanoparticles remain stable. Molecular dynamics simulations show that the free energy of a single citrate bridge between nanoparticles in solution is much larger than the thermal energy and in fact is much larger than typical adsorption free energies of ions on colloids. Summarizing our experiments and simulations, we identify as key aspects of the self-assembly mechanism the requirement of NPs with a surface able to adsorb anions and cations and the presence of multidentate ions in solution. This indicates that this new ion-mediated self-assembly mechanism is not specific of YF3 and citrate anions, as supported by preliminary experimental results in other systems., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund) and SUPERINKS project (RTC-2015-3640-3, cofinanced by the European Regional Development Fund). We also thank support from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and ULTRASUPERTAPE project (H2020 ERC-2014-ADG-669504) and from the Catalan Government with 2014-SGR-753 and Xarmae. The authors acknowledge the technical support of Servei de Microscòpia, NMR Service and Servei de Difracció de Raigs-X, all at the UAB, to the Soft Materials Service and Dr. Judit Oró (Microscope Service) at the ICMAB-CSIC, Dr. Guillaume Sauthier for his support in XPS analysis, and Dr. Eduardo Solano for his scientific discussions. J.M.E. acknowledges the PIF predoctoral fellowship from the Universitat Autònoma de Barcelona. J.F. thanks CESGA Supercomputing Center for technical support and the use of computational resources. We thank Justin J. Charette for help with English usage., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vortex Lattice Instabilities in YBa2Cu3O7-x Nanowires

  • Rouco, Víctor
  • Massarotti, Davide
  • Stornaiuolo, Daniela
  • Papari, Gian Paolo
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Tafuri, Francesco
  • Palau, Anna
High-resolution focused ion beam lithography has been used to fabricate YBa2Cu3O7-x (YBCO) wires with nanometric lateral dimensions. In the present work, we investigate Flux-flow instabilities in nanowires of different widths, showing sudden voltage switching jumps from the superconducting to the normal state. We present an extensive study on the temperature and field dependence of the switching characteristics which reveal that voltage jumps become less abrupt as the temperature increases, and disappear at the vortex-liquid state. On the contrary, the current distribution at the critical point becomes narrower at high temperatures. Sharp voltage switchings very close to the critical current density can be obtained by reducing the width of the nanowires, making them very appealing for practical applications., We acknowledge financial support fromthe SpanishMinistry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund). We also are grateful for support from the European Union for ULTRASUPERTAPE project (ERC-2014-ADG-669504), NANOCOHYBRI project (Cost Action CA 16218), and from the Catalan Government with SGR-2017 and Xarmae. We acknowledge the use of ICTS-CNM facilities and ICMAB scientific and technical services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical Tuning of Metal Insulator Transition and Nonvolatile Resistive Switching in Superconducting Films

  • Palau, Anna
  • Fernández Rodríguez, Alejandro
  • Gonzalez Rosillo, Juan Carlos
  • Granados, Xavier
  • Coll, Mariona
  • Bozzo, Bernat
  • Ortega Hernandez, Rafael
  • Suñé, Jordi
  • Mestres, Narcís
  • Obradors, Xavier
  • Puig Molina, Teresa
Modulation of carrier concentration in strongly correlated oxides offers the unique opportunity to induce different phases in the same material, which dramatically change their physical properties, providing novel concepts in oxide electronic devices with engineered functionalities. This work reports on the electric manipulation of the superconducting to insulator phase transition in YBa2Cu3O7−δ thin films by electrochemical oxygen doping. Both normal state resistance and the superconducting critical temperature can be reversibly manipulated in confined active volumes of the film by gate-tunable oxygen diffusion. Vertical and lateral oxygen mobility may be finely modulated, at the micro- and nano-scale, by tuning the applied bias voltage and operating temperature thus providing the basis for the design of homogeneous and flexible transistor-like devices with loss-less superconducting drain–source channels. We analyze the experimental results in light of a theoretical model, which incorporates thermally activated and electrically driven volume oxygen diffusion., We acknowledge the financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R), co-financed by the European Regional Development Fund. We also thank the support from the European Union for NanoSC Cost Action (MP1201), NANOCOHYBRI (CA 16218) and ERC-2014-ADG-669504, and from the Catalan Government with 2014-SGR-753 and Xarmae. A.F.-R. and J.C.G.-R. thank Spanish Ministry of Economy for his FPI Spanish grants (BES-2016-077310, BES-2012-053814)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct observation of apical oxygen vacancies in the high-temperature superconductor YBa2Cu3O7−x

  • Hartman, Steven T.
  • Mundet, Bernat
  • Idrobo, Juan Carlos
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Gázquez, Jaume
  • Mishra, Rohan
The properties of the high-temperature superconductor YB a 2 C u 3 O 7 − x (YBCO) depend on the concentration of oxygen vacancies ( V O ). It is generally agreed upon that V O form in the CuO chains, even at low concentrations where the critical temperature for superconductivity peaks ( x ≈ 0.07 ), with only a handful of reports suggesting the presence of V O at the apical sites. In this paper, we show direct evidence of apical V O in optimally doped YBCO samples. Using density-functional-theory calculations, we predict that isolated V O are equally favorable to form in either the CuO chains or the apical sites, which we confirm using atomic-resolution scanning transmission electron microscope imaging and spectroscopy. We further show that apical V O lead to significant lattice distortions and changes in the electronic structure of YBCO, indicating they should be considered on an equal footing with chain V O to understand the superconducting properties of YBCO in the optimal doping region., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local strain-driven migration of oxygen vacancies to apical sites in YBa2Cu3O7−x

  • Mundet, Bernat
  • Hartman, Steven T.
  • Guzmán, Roger
  • Idrobo, Juan Carlos
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Mishra, Rohan
  • Gázquez, Jaume
It is well known that in the high-temperature superconductor YBa2Cu3O7−x (YBCO), oxygen vacancies (VO) control the carrier concentration, its critical current density and transition temperature. In this work, it is revealed that VO also allows the accommodation of local strain fields caused by large-scale defects within the crystal. We show that the nanoscale strain associated with Y2Ba4Cu8O16 (Y124) intergrowths— that are common defects in YBCO—strongly affect the venue and concentration of VO. Local probe measurements in conjunction with density-functional-theory calculations indicate a strain-driven reordering of VO from the commonly observed CuO chains towards the bridging apical sites located in the BaO plane and bind directly to the superconducting CuO2 planes. Our findings have strong implications on the physical properties of the YBCO, as the presence of apical VO alters the transfer of carriers to the CuO2 planes, confirmed by changes in the Cu and O core-loss edge probed using electron energy loss spectroscopy, and creates structural changes that affect the Cu–O bonds in the superconducting planes. In addition, the revelation of apical VO also has implications on modulating critical current densities and enhancing vortex pinning., We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496), and the COACHSUPENERGY project (SUMATE – RTI2018-095853-B-C21, co-financed by the European Regional Development Fund). B. M, R. G., J. G., T. P. and X. O also thank the European Union for its support under the EUROTAPES project (FP7-NMP-Large-2011-280432), ULTRASUPERTAPE project (ERC-2014-ADG-669504), and COST Action NANOCOHYBRI (CA16218), and from the Catalan Government under 2017-SGR-1519 and Xarmae. J. G. also acknowledges the Ramon y Cajal Program (RYC-2012-11709). S. H. and R. M. acknowledge financial support from the National Science Foundation (NSF) grant DMR-1806147. STEM imaging and analysis at 200 kV was sponsored by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division, and STEM imaging at 100 kV was conducted at the Center for Nanophase Materials Sciences, which is a DOE Office of Science User Facility. Computations in this work benefited from the use of the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by NSF grants ACI-1053575 and ACI-1548562., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast transient liquid assisted growth of high current density superconducting films

  • Soler, Laia
  • Jareño Cerulla, Julia
  • Banchewski, Juri
  • Rasi, Silvia
  • Chamorro, Natalia
  • Guzmán, Roger
  • Yáñez, Ramón
  • Mocuta, Cristian
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Obradors, Xavier
  • Puig Molina, Teresa
The achievement of high growth rates in YBa2Cu3O7 epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s−1) and high critical current densities (5 MA cm−2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process., Authors acknowledge EU for ULTRASUPERTAPE ERC-2014-ADG-669504; COACHSUPENERGY MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R from MINECO; SuMaTe RTI2018-095853-B-C21 and RTI2018-095853-B-C22 from MICINN and co-financing by the European Regional Development Fund; 2017-SGR 1519 from Generalitat de Catalunya; and EU COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors thank Dr. Cornelia Pop, Dr. Bohores Villarejo, Dr. Bernat Mundet, and Dr Anna Palau for contributions at the initial stages of the project. We thank Diana García, Lavinia Saltarelli, Adria Pacheco, Dr. Max Sieger, and Dr. Albert Queralto for help in the feasibility study and preliminary results on thick films and coated conductors. Authors acknowledge support from SuNAM Co Ltd. for providing the buffered metallic substrates for the initial tests on coated conductors. We also acknowledge the Scientific Services at ICMAB, ICTS of IMB-CNM-CSIC, ICN2 Electron Microscopy Division and LMA-INA from Aragon, and SOLEIL Synchrotron for granting beamtime for XRD experiments and the DiffAbs beamline personnel for help. L.S. and J.J. also acknowledge their FPU-MINECO PhD grant, S.R. and N.C. thank University of Girona and Generalitat de Catalunya fort their PhD FI grant, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suppression of superconductivity at the nanoscale in chemical solution derived YBa2Cu3O7−δ thin films with defective Y2Ba4Cu8O16 intergrowths

  • Li, Ziliang
  • Coll, Mariona
  • Mundet, Bernat
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
The analysis of the microstructure and superconducting behavior of chemical solution deposited epitaxial YBa2Cu3O7-δ films, with thickness going down to 5 nm has been carried out with the purpose to disclose the behavior of the most common intergrowth in these films, the Y2Ba4Cu8O16. The analysis of ultrathin films is a unique opportunity to investigate the superconducting behavior of these nanoscale defects because of the high concentration created as a consequence of the elastic energy associated to the misfit strain. Magnetic susceptibility and X-ray diffraction measurements evidence a strong decrease of the superconducting volume correlated with an increase of the intergrowth volume fraction. We demonstrate that these intergrowths are non-superconducting nanoscale regions where Cooper pair formation is disrupted, in agreement with their key role as artificial pinning centers for vortices in YBa2Cu3O7-δ films and coated conductors., All authors acknowledge the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project and ULTRASUPERTAPE ERC-2014-ADG-669504), MINECO (COACHSUPENERGY, MAT2014-51778-C2-1-R and SuMaTe RTI2018-095853-B-C21), COST Action NANOCOHYBRI (CA16218) and Generalitat de Catalunya (2017SGR 1519). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors acknowledge the Scientific Services at ICMAB, the ICN2 Electron Microscopy Division and LMA-INA for offering access to their instruments and expertise. M.C. also acknowledge the Ramon y Cajal program (RYC-2013-12448). Z.L. acknowledges the China Scholarship Council (CSC) and B.M. the Spanish Ministry for his PhD grant (BES-2015- 072749f)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid approach to obtain high-quality BaMO3 perovskite nanocrystals

  • Chamorro, Natalia
  • Martínez Esaín, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Ros, Josep
  • Yáñez, Ramón
  • Ricart, Susagna
A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported. This new synthetic methodology sets a whole general route to successfully tune the sizes of high-quality BaMO3 (M = Ti4+, Zr4+, and Hf4+) perovskite nanocrystals. Purely cubic-phase nanocrystals (stable in alcohol media) were obtained using controlled water amounts, combining the well-known aqueous sol–gel process with the classic solvothermal method. Exhaustive optimizations revealed feasibility of a fast (1 hour) and reproducible synthesis with small variations in the crystal size or agglomeration parameters. The study also reveals water content as the pivotal factor to achieve this wide range of sizes through a controlled hydrolytic step. Finally, the study of the hydrolytic process made it possible to shed some light on mechanistic insights of this synthetic route., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, cofinanced by the European Regional Development Fund) and SUPERINKS project (RTC-2015-3640-3, cofinanced by the European Regional Development Fund). We also thank support from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and ULTRASUPERTAPE project (H2020 ERC-2014-ADG-669504) and from the Catalan Government with 2014-SGR-753 and Xarmae. The authors acknowledge the technical support of Servei de Microscópia, and Servei de Difracció de Raigs- X, all at the UAB, and Dr Judith Oró (Microscope Service) at the ICMAB-CSIC, Dr Guillaume Sauthier for his support in XPS analysis. NCG acknowledge the PIF predoctoral fellowship from the Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relevance of the Formation of Intermediate Non-Equilibrium Phases in YBa2Cu3O7-x Film Growth by Transient Liquid-Assisted Growth

  • Rasi, Silvia
  • Soler, Laia
  • Jareño Cerulla, Julia
  • Banchewski, Juri
  • Guzmán, Roger
  • Mocuta, Cristian
  • Kreuzer, Martin
  • Ricart, Susagna
  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid-assisted growth (TLAG) is a non-equilibrium ultrafast method to grow YBa2Cu3O7–x (YBCO) superconducting films at up to 100 nm/s using chemical solution deposition. In this work, we study the formation of non-equilibrium crystalline intermediate phases prior to the growth of YBCO through TLAG. We analyze the thermal decomposition and microstructural evolution of a propionate-based fluorine-free solution used as precursor to YBCO epitaxial films. Thermal analyses (TGA, DSC), coupled with techniques to monitor the volatiles (TG-IR), were applied in situ during film pyrolysis in humid O2, while the thermal evolution of the solid residue was characterized by infrared spectroscopy and X-ray diffraction, both ex situ and in situ in synchrotron radiation sources, and by scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) cross-sectional analysis. Unexpected effects, observed during the decomposition of the ternary solution, are the formation of intermediate non-equilibrium phases: Cu2O or Cu(0) and monoclinic BaCO3. We emphasize that working with anhydrous solutions and anhydrous deposition conditions promotes the formation of the expected equilibrium phases. Finally, in situ X-ray diffraction permits monitoring the influence of the non-equilibrium monoclinic BaCO3 phase on the formation of binary oxide phases, precursors of TLAG YBCO film growth. Understanding the evolution of non-equilibrium phases is shown to be fundamental for the control of the final YBCO film’s microstructure and performance, since the latter are strongly affected by the film’s thermal history after solution deposition., This work was funded by Ministerio de Ciencia, Innovation y Universidades (RTI2018-095853-B-C21 and RTI2018-095853-B-C22) cofinanced by the European Regional Development Fund, and the EU Ultrasupertape project (ERC ADG-2014-669504). We also acknowledge the Center of Excellence Severo Ochoa (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-1519) and the COST -action NANOCOHYBRI (CA16218). In situ FTIR experiments were performed at the MIRAS beamline of the ALBA Synchrotron with the collaboration of ALBA staff. We also thank the DiffAbs beamline at SOLEIL Synchrotron facility and the beamline staff support for the in situ XRD experiments. We thank the ICMAB, INA-Zaragoza and UdG scientific services and technical staff for the support on the experiments. S.R. thanks the Universitat de Girona (UdG) for the IFUdG grant. L.S. and J.J. also acknowledge their FPU-MINECO PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combinatorial Screening of Cuprate Superconductors by Drop-On-Demand Inkjet Printing

  • Queraltó, Albert
  • Banchewski, Juri
  • Pacheco, Adrià
  • Gupta, Kapil
  • Saltarelli, Lavinia
  • García Franco, Diana
  • Alcalde, Núria
  • Cristian Mocuta,
  • Ricart, Susagna
  • Pino, Flavio
  • Obradors, Xavier
  • Puig Molina, Teresa
Combinatorial and high-throughput experimentation (HTE) is achieving more relevance in material design, representing a turning point in the process of accelerated discovery, development, and optimization of materials based on data-driven approaches. The versatility of drop-on-demand inkjet printing (IJP) allows performing combinatorial studies through fabrication of compositionally graded materials with high spatial precision, here by mixing superconducting REBCO precursor solutions with different rare earth (RE) elements. The homogeneity of combinatorial Y1−xGdxBa2Cu3O7 samples was designed with computational methods and confirmed by energy-dispersive Xray spectroscopy (EDX) and high-resolution X-ray diffraction (XRD). We reveal the advantages of this strategy in the optimization of the epitaxial growth of high-temperature REBCO superconducting films using the novel transient liquid-assisted growth method (TLAG). Advanced characterization methods, such as in situ synchrotron growth experiments, are tailored to suit the combinatorial approach and demonstrated to be essential for HTE schemes. The experimental strategy presented is key for the attainment of large datasets for the implementation of machine learning backed material design frameworks., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504) and EU COST action for CA16218 (NANOCOHYBRI). We also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, and Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), SUMATE project (RTI2018-095853-B-C21, co-financed by the European Regional Development Fund). Synchrotron SOLEIL is acknowledged for granting the beamtime (under project no. 20190274) and P. Joly for setup assistance at the DiffAbs beamline. We also acknowledge support from the Catalan Government with 2017-SGR-1519 and the energy Catalan network E4S. A.Q. thanks the Spanish Ministry of Science, Innovation and Universities for his “Juan de la Cierva” postdoctoral fellowship (Grant no. IJC2018-035034-I). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-high critical current densities of superconducting YBa2Cu3O7-δ thin films in the overdoped state

  • Stangl, Alexander
  • Palau, Anna
  • Deutscher, Guy
  • Obradors, Xavier
  • Puig Molina, Teresa
The functional properties of cuprates are strongly determined by the doping state and carrier density. We present an oxygen doping study of YBa2Cu3O7-δ (YBCO) thin films from underdoped to overdoped state, correlating the measured charge carrier density, nH, the hole doping, p, and the critical current density, Jc. Our results show experimental demonstration of strong increase of Jc with nH, up to Quantum Critical Point (QCP), due to an increase of the superconducting condensation energy. The ultra-high Jc achieved, 90 MA cm−2 at 5 K corresponds to about a fifth of the depairing current, i.e. a value among the highest ever reported in YBCO films. The overdoped regime is confirmed by a sudden increase of nH, associated to the reconstruction of the Fermi-surface at the QCP. Overdoping YBCO opens a promising route to extend the current carrying capabilities of rare-earth barium copper oxide (REBCO) coated conductors for applications., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496), the EU ULTRASUPERTAPE (ERC-2014-ADG-669504) and EUROTAPES project (FP7-NMP-Large-2011-280432), and the Spanish CONSOLIDER Excellence Network (Grant No. MAT2015-68994-REDC), COACHSUPENERGY project (Grant No. MAT2014-56063-C2-1-R) and SuMaTe project (RTI2018-095853-B-C21), both cofinanced by the European Regional Development Fund, and from the Catalan Government with Grant No. 2014-SGR-753 and 2017-SGR-1519. Authors also thank the network collaboration of EU COST action NANOCOHYBRI CA16218.We also acknowledge the Scientific Services at ICMAB. We thank Juri Banchewski for some of the last transport experiments. A.S. is grateful for illuminating discussions on the manuscript with Stephan Steinhauer (KTH, Sweden)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-Space Image of Charged Patches in Tunable-Size Nanocrystals

  • Martinez Esain, Jordi
  • Pérez Rodríguez, Ana
  • Faraudo, Jordi
  • Barrena, Esther
  • Yáñez, Ramón
  • Ocal, Carmen
  • Ricart, Susagna
The remarkable dual nature of faceted-charge patchy metal fluoride nanocrystals arises from the spontaneous selective coordination of anionic and cationic ligands on the different facets of the nanocrystals. In previous studies, the identification and origin of the charge at the patches were obtained by combining computer simulations with indirect experimental evidence. Taking a step further, we report herein the first direct real-space identification by Kelvin probe force microscopy of the predicted faceted-charge patchy behavior, allowing the image of the dual faceted-charge surfaces. High-resolution transmission electron microscopy reveals the detailed nanocrystal faceting and allows unambiguously inferring the hydrophilic or hydrophobic role of each facet from the identification of the surface atoms exposed at the respective crystallographic planes. The success of the study lies in a foresighted synthesis methodology designed to tune the nanocrystal size to be suitable for microscopy studies and demanding applications., This work was supported by the Spanish Government through the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S), the COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and PID2019-110907GB-I00. We also thank the support from the European Union for the ERC Advanced Grant (ULTRASUPERTAPE (ERC-2014-ADG-669504) and IMPACT (ERC-2019-PoC-874964) projects) funded by the European Research Council and from the Catalan Government through 2014-SGR753 and Xarmae., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defining inkjet printing conditions of superconducting cuprate films through machine learning

  • Queraltó, Albert
  • Pacheco, Adrià
  • Jiménez Valcárcel, Nerea
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
The design and optimization of new processing approaches for the development of rare earth cuprate (REBCO) high temperature superconductors is required to increase their cost-effective fabrication and promote market implementation. The exploration of a broad range of parameters enabled by these methods is the ideal scenario for a new set of high-throughput experimentation (HTE) and data-driven tools based on machine learning (ML) algorithms that are envisaged to speed up this optimization in a low-cost and efficient manner compatible with industrialization. In this work, we developed a data-driven methodology that allows us to analyze and optimize the inkjet printing (IJP) deposition process of REBCO precursor solutions. A dataset containing 231 samples was used to build ML models. Linear and tree-based (Random Forest, AdaBoost and Gradient Boosting) regression algorithms were compared, reaching performances above 87%. Model interpretation using Shapley Additive Explanations (SHAP) revealed the most important variables for each study. We could determine that to ensure homogeneous CSD films of 1 micron thickness without cracks after the pyrolysis, we need average drop volumes of 190–210 pl, and no. of drops between 5000 and 6000, delivering a total volume deposited close to 1 μl., The present work has been carried out in the framework of an ERC Advanced Grant (ULTRASUPERTAPE (ERC-2014-ADG-669504) and IMPACT (ERC-2019-PoC-874964) projects) funded by the European Research Council. We also acknowledge funding from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), and the SUMATE project (RTI2018-095853-B-C21, co-financed by the European Regional Development Fund). In addition, we thank the European Commission for the funding through the COST action CA16218 (NANOCOHYBRI) and the Catalan Government (2017-SGR-1519 and XRE4S). A. Queraltó received funding from the Spanish Ministry of Science, Innovation and Universities (“Juan de la Cierva” postdoctoral fellowship (Grant no. IJC2018-035034-I)) and the DATOPTICON project (Severo Ochoa call FUNFUTURE-FIP-2020). We would like to thank Jordi Aguilar for fruitful discussions regarding the implementation of machine learning., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical and Microstructural Nanoscale Homogeneity in Superconducting YBa2Cu3O7-x Films Derived from Metal-Propionate Fluorine-free Solutions

  • Saltarelli, Lavinia
  • Gupta, Kapil
  • Rasi, Silvia
  • Kethamkuzhi, Aiswarya
  • Queraltó, Albert
  • García Franco, Diana
  • Gutierrez, Joffre
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
Research involved in developing alternative energy sources has become a necessity to face global warming. In this context, superconductivity is an appealing solution to enhance clean electrical energy provided that lower production costs can be attained. By implementation of chemical solution deposition techniques and high-throughput growth methods, low-cost nanostructured epitaxial cuprate superconductors are timely candidates. Here, we present a versatile and tunable solution method suitable for the preparation of high-performance epitaxial cuprate superconducting films. Disregarding the renowned trifluoroacetate route, we center our focus on the transient liquid-assisted growth (TLAG) that meets the requirement of being a greener chemical process together with ultrafast growth rates beyond 100 nm/s. We developed a facile, fast, and cost-effective method, starting from the synthesis of metal-propionate powders of Y, Ba, and Cu of high purity and high yields, being the precursors of the fluorine-free solutions, which enable the chemical and microstructural nanoscale homogeneity of YBa2Cu3O7-x (YBCO) precursor films. These solutions present endured stability and enable precise tunability of the composition, concentration, porosity, and film thickness. Homogeneous precursor films up to thicknesses of 2.7 μm through eight layer multidepositions are demonstrated, thus establishing the correct basis for epitaxial growth using the fast kinetics of the TLAG process. YBCO films of 500 nm thickness with a critical current density of 2.6 MA/cm2 at 77 K were obtained, showing the correlation of precursor film homogeneity to the final YBCO physical properties., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964), and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Programme for Centres of Excellence in FUNFUTURE (CEX2019-000917-S), SUMATE projects (RTI2018-095853-B-C21, RTI2018-095853-B-C22 co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE), and SUPERENERTECH projects (PID2021-127297OB-C21 and PID2021-127297OB-C22). The authors also thank support from the Catalan Government with 2017-SGR-1519 and Catalan energy network XRE4S (2018 XARDI 00002). L.S., D.G., and A.K. acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.S. and D.G. would like to thank the UAB PhD program in Materials Science, and A.K. would like to thank the UAB PhD program in Physics. A.Q. would like to thank the Spanish Ministry of Science, Innovation and Universities [“Juan de la Cierva” postdoctoral fellowship (grant no. IJC2018-035034-I)]. The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. The content of this paper is the object of a European patent application no. EP22382741.1 filed on 29/07/2022., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing vortex pinning in YBa2Cu3O7-x superconducting films up to high magnetic fields

  • Vallés, Ferran
  • Palau, Anna
  • Abraimov, Dmytro
  • Jaroszynski, Jan
  • Constantinescu, Anca Monia
  • Mundet, Bernat
  • Obradors, Xavier
  • Larbalestier, David
  • Puig Molina, Teresa
The magnetic flux pinning capabilities of YBa2Cu3O7-x (YBCO) coated conductors vary strongly across different regions of the magnetic field–temperature phase diagram and with the orientation of the magnetic field θ. Here, we determine the optimal pinning landscape for a given region of the phase diagram by investigating the critical current density Jc(H,θ,T) in the 5–77 K temperature range, from self-field to high magnetic fields of 35 T. Our systematic analysis reveals promising routes for artificially engineering YBCO coated conductors in any region of interest of the phase diagram. In solution-derived nanocomposites, we identify the relevance of coexisting high amounts of short stacking faults, Cu-O vacancy clusters, and segmentation of twin boundaries, in combination with nanoparticles, for enhanced pinning performance at high magnetic fields and low temperatures. Moreover, we demonstrate that twin boundaries preserve a high pinning energy in thick YBCO films, which is beneficial for the pinning performance at high magnetic fields and high temperatures., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496), ULTRASUPERTAPE (ERC-2014-ADG-669504), EUROTAPES project (FP7-NMP-Large-2011-280432), the CONSOLIDER Excellence Network (Grant No. MAT2015-68994-REDC), COACHSUPENERGY project (Grant No. MAT2014-56063-C2-1- R and SuMaTe RTI2018-095853-B-C21, co-financed by the European Regional Development Fund), and from the Catalan Government with Grant No. 2014-SGR-753 and 2017-SGR-1519. Authors also thank the network collaboration of EU COST action NANOCOHYBRI CA16218. We also acknowledge the Scientific Services at ICMAB and Z. Li and P. Cayado for the growth of the studied samples. A portion of this work was performed at the National High Magnetic Field Laboratory, which is supported by the National Science Foundation Cooperative Agreement No. DMR-1644779 and the State of Florida., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBa2Cu3O7-x Superconducting Films

  • Rasi, Silvia
  • Queraltó, Albert
  • Banchewski, Juri
  • Saltarelli, Lavinia
  • García Franco, Diana
  • Pacheco, Adrià
  • Gupta, Kapil
  • Kethamkuzhi, Aiswarya
  • Soler, Laia
  • Jareño Cerulla, Julia
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBa2 Cu3 O7- x (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm-2 at 77 K and growth rates between 100-2000 nm s-1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964) and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from Spanish Ministry of Science and Innovation with PID2021-127297OB-C21 and PID2021-127297OB-C22, and from Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), and from the Spanish Ministry of Economy and Competitiveness with the SUMATE project (RTI2018-095853-B-C21, RTI2018-095853-B-C22, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE). They also thank the Catalan Government (2017-SGR-1519) and the Catalan energy network XRE4S (2018 XARDI 00002) for their support. L.S., D.G., and A.K. acknowledge financial support from Spanish Ministry of Science, Innovation and Universities through the FPI grant PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.So. and J.J. acknowledge financial support from Spanish Ministry for the FPU grants. S.R. thanks the Universitat de Girona for IFUdG grant and A.Q. thanks the Spanish Ministry of Science, Innovation and Universities (“Juan de la Cierva” postdoctoral fellowship [Grant no. IJC2018-035034-I]). The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza. The authors also acknowledge SOLEIL Synchrotron for provision of synchrotron radiation facilities and are grateful for assistance while using the DiffAbs beamline., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transient liquid assisted growth of superconducting YBa2Cu3O7−x films based on pulsed laser deposition

  • Queraltó, Albert
  • Sieger, Max
  • Gupta, Kapil
  • Meledin, Alexander
  • Barusco, Pedro
  • Saltarelli, Lavinia
  • Palau, Mariona García de
  • Granados, Xavier
  • Obradors, Xavier
  • Puig Molina, Teresa
We investigated the integration of transient liquid-assisted growth (TLAG) approach for epitaxial YBa2Cu3O7−x (YBCO) films by physical deposition methodologies (pulsed laser deposition (PLD)), as an additional opportunity for high-throughput growth of YBCO. As a prerequisite, highly flat and amorphous YBCO precursor films were deposited by PLD at temperatures below 400 °C on single-crystalline SrTiO3 (STO) and LaMnO3 (LMO)/STO, as well as industrial coated conductor architectures. Contrary to TLAG based on chemical solution deposition, where BaCO3 elimination is a key factor for the YBCO growth, TLAG-PLD growth is controlled by the transformation of Ba-Cu-O (s) to a transient liquid. High-quality c-axis YBCO films were successfully grown on different substrates, as demonstrated by high-resolution x-ray diffraction and transmission electron microscopy. In-situ resistance measurements revealed that the growth rates around 1000 nm s−1 can be achieved, outperforming the capabilities of standard PLD growth of REBa2Cu3O7 films by few orders of magnitude. Experimental conditions such as temperature, oxygen partial pressure, and heating ramp, were optimized to obtain critical temperature (T c) values up to 90 K. Critical current densities of 15 MA cm−2 at 5 K and 1.7 MA cm−2 at 77 K were obtained for YBCO films of 450 nm on LMO/STO., The authors acknowledge European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964) and SMS-INKS project (ERC-2022-PoC-101081998), as well as the EU COST actions CA16218 (NANOCOHYBRI), CA20116 (OPERA) and CA21144 (SUPERQUMAP). We also thank financial support from the Spanish Ministry of Economy and Competitiveness, and Spanish Ministry of Science, Innovation and Universities through the 'Severo Ochoa' Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), FUNFUTURE-FIP-2020-DATOPTICON, SUPERENERTECH project (PID2021-127297OB-C21), and SUMATE project (RTI2018-095853-B-C21, co-financed by the European Regional Development Fund). We also acknowledge support from the Catalan Government with 2017-SGR-1519 and the Catalan energy network XRE4S (2018 XARDI 00002). A Q thanks the Spanish Ministry of Science, Innovation and Universities for his 'Juan de la Cierva' postdoctoral fellowship (Grant No. IJC2018-035034-I). L S acknowledges financial support from Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2019-090621. Dr Silvia Rasi and Dr Roxana Vlad are thanked for fruitful discussions. We acknowledge the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. Authors also acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node 'Laboratorio de Microscopías Avanzadas' at University of Zaragoza. SuNAM Co. is acknowledged for providing metallic substrates., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Impact of high growth rates on the microstructure and vortex pinning of high-temperature superconducting coated conductors

  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
  • Obradors, Xavier
High-temperature superconducting REBa2Cu3O7 (RE = rare earth or yttrium) coated conductors have emerged as a new class of materials with exceptional physical properties, such as very high critical currents and irreversibility field. Understanding the physics of vortices in these complex materials and controlling of the atomic structure of defects have made it possible to design their performance and achieve exceptional values of superconducting properties which enable their integration into devices. In order to improve performance and reduce costs, faster growth methods are now being explored, which raise new vortex physics scenarios. In this Technical Review, we distinguish the rich vortex pinning microstructure for vapour–solid, solid–solid and liquid–solid growth methods and how it is modified in the fast-growth process. The interplay between vortex physics and defect structure generated at high growth rates is addressed, as well as the implications of the electronic structure on vortex physics., We acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022- PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). We also acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), FUNFUTURE “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019–000917-S) and HTS-JOINTS (PDC2022–133208-I00) and PTI+TransEner CSIC programme for Spanish NGEU. The authors also thank the Catalan Government for 2021 SGR 00440. The access and staff support of several advanced facilities (Soleil and ALBA synchrotrons, INMA and ICN2 electron microscopes, ICMAB scientific services, NHMF Laboratory) are also acknowledged. Many discussions with academic and industrial colleagues and collaborators in the field of coated conductors and vortex pinning are acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Progress in superconducting REBa2Cu3O7 (RE = rare earth) coated conductors derived from fluorinated solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Palau, Anna
  • Coll, Mariona
  • Gutierrez Royo, Joffre 
  • Farjas, Jordi
  • Bartolomé, Elena
In this work, we review recent progress achieved in the use of chemical solution deposition (CSD) based on fluorinated metalorganic precursors to grow superconducting REBa2Cu3O7 (REBCO) films and coated conductors (CCs). We examine, first of all, the advances in optimizing the steps related to the solutions preparation, deposition and pyrolysis based on novel low-fluorine metalorganic solutions. We show that a new type of multifunctional colloidal solutions including preformed nanoparticles (NPs), can be used to introduce artificial pinning centers (APCs). We analyze how to disentangle the complex physico-chemical transformations occurring during the pyrolysis with the purpose of maximizing the film thicknesses. Understanding the nucleation and growth mechanisms is shown to be critical to achieve a fine tuning of the final microstructure, either using the spontaneous segregation or the colloidal solution approaches, and make industrially scalable this process. Advanced nanostructural studies have deeply modified our understanding of the defect structure and its genealogy. It is remarkable the key role played by the high concentration of randomly distributed and oriented BaMO3 (M = Zr, Hf) NPs which enhance the concentration of APCs, such as stacking faults and the associated partial dislocations. Correlating the defect structure with the critical current density Jc (H,T,θ) allows to reach a tight control of the vortex pinning properties and to devise a general scheme of the vortex pinning landscape in the whole H-T phase diagram. We also refer to the outstanding recent achievements in enhancing the vortex pinning strength by shifting the carrier concentration in REBCO films towards the overdoped state, where the pinning energy is maximum and so, record values of critical current densities are achieved. This confirms the performance competitiveness of nanocomposite CCs prepared through the CSD route. We conclude with a short summary of the progress in scaling the CC manufacturing using fluorinated solutions., Authors acknowledge the European Union Research Council for EUROTAPES (EU-FP7-NMP-LA-2012-280432) and FASTGRID (EU-H2020, 721019) projects and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144); the European Research Council for ULTRASUPERTAPE (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998) projects. Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for COACHSUPENERGY project (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R), SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22), SUPERENERTECH (PID2021-127297OB-C21, PID2021-127297OB-C22) and PID2022-138492NB-I00, FUNMAT and FUNFUTURE ICMAB 'Severo Ochoa' Program for Centers of Excellence in R&D (SEV-2015-0496, CEX2019-000917-S) and HTS-JOINTS (PDC2022-133208-I00). They also thank the PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and Catalan Government for 2017 SGR 1519 and 2021 SGR 00440 and that of Aragon for RASMIA (E12-23R)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Liquid Composition in the Transient Liquid Assisted Growth of Superconducting YBa2Cu3O7-δ Films

  • Saltarelli, Lavinia
  • García Franco, Diana
  • Soler, Laia
  • Pach, Elzbieta
  • Gupta, Kapil
  • Sánchez Rodríguez, Daniel
  • Aguilar, Jordi
  • Fuentes, Víctor
  • Solano, Eduardo
  • Mocuta, Cristian
  • Farjas, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
The unparalleled loss-less electrical current conduction of high-temperature superconducting (HTS) materials encourages research on YBa2Cu3O7-𝛿 (YBCO) to unravel opportunities toward numerous applications. Nonetheless, production costs and throughput of the commercialized HTS Coated Conductors (CCs) are still limiting a worldwide spread. Transient liquid assisted growth (TLAG) is a non-equilibrium process displaying ultrafast growth rate which, when combined with chemical solution deposition (CSD), is emerging as a strong candidate to reduce the cost/performance ratio of YBCO superconductors. This study explores the influence of the (Ba:Cu) molar ratio of the transient liquid composition on the nucleation and growth mechanisms of TLAG. This enables an in-depth analysis of the critical role of the yttrium supersaturation in the transient liquids considering the out-of-equilibrium kinetic character of TLAG. Advanced characterization techniques, including in situ synchrotron X-ray diffraction, coupled to a multi-parameter analysis of the contributions to the physical performance, elucidate the influence of transient liquid supersaturation as driving force toward YBCO nucleation and growth. Understanding the fundamental role played by the initial ink composition allows to disentangle how to reach high superconducting performance. The fabrication of high-performance YBCO films through this novel, high-throughput growth methodology promotes the use of HTS materials in large scale power applications., Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and REBCOTLAG (PID2021-127297OB-C22). They also thank the Catalan Government for 2021 SGR 00440. L.S. and D.G. acknowledge financial support from Spanish Ministry of Science, Innovation, and Universities through the FPI grant PRE2019-090621 and PRE2018-084537, respectively. D.S.R. acknowledges the support received from the Beatriu de Pinós Programme and the Ministry of Research and Universities of the Government of Catalonia (Fellowship BP00069). E.P. acknowledges the Juan de la Cierva Incorporación Grant IJC2020-045520-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”. Authors thank the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and Scientific Services at the University of Girona. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Moreover, authors acknowledge SOLEIL Synchrotron and ALBA Synchrotron for the provision of radiation facilities and are grateful for the assistance received when conducting experiments at DiffAbs and NCD-SWEET Beamlines., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the overdoping effects in Transient Liquid Assisted Grown YBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] superconducting films

  • Kethamkuzhi, Aiswarya
  • Saltarelli, Lavinia
  • Gupta, Kapil
  • Torres, Carla
  • García, Diana
  • Gutiérrez, Joffre
  • Obradors, Xavier
  • Puig Molina, Teresa
The data that support the findings of this study will be made available at the institutional repository “digital.csic” upon reasonable request., The enhancement of the current-carrying capabilities of cuprate materials depends highly on the knowledge of how to tweak their doping state. The recent efforts on overdoping YBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] (YBCO) to push the limit of critical current density towards the depairing critical current density are also based on the study of their doping state. We present the overdoping study of Transient Liquid Assisted Grown YBCO films through various oxygenation strategies, including oxygen-ozone mixtures and Ag surface-decoration layers. We systematically analyze how the key kinetic parameters, such as temperature, dwell time, ozone concentration, and surface modification, influence the oxygen content and superconducting properties of the films. Our results provide insights into achieving the overdoped regime in TLAG YBCO and offer a comparison with films grown via the Pulsed Laser Deposition (PLD) method. This study of overdoping on the TLAG YBCO films, which compares three distinct oxygenation methods and conducts an unprecedented analysis of the ozone-assisted process, promises a substantial enhancement in REBa[Formula: see text]Cu[Formula: see text]O[Formula: see text] (REBCO, RE = rare earth elements) fabrication., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094). We also acknowledge the funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. We also thank the Catalan Government for 2021 SGR 00440. A.K, L.S, D.G, and C.T would like to acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2020-091817, PRE2019-090621, PRE2018-084537, and PRE2022-102078, respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Superconducting high-power cables and lines—development status and technology roadmap

  • Noe, Mathias
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Laan, D C. van der
  • Dönges, S.A.
  • Weiss. Jeremy
  • Radcliff, Kyle
  • Cheetham, Peter
  • Pamidi, S.
  • Nguyen, Doan
  • Nguyen, L.N .
  • Bach, R.
  • Mansheim, P.
  • Prinz, R.
  • Willen, Dag
  • Alekseev, Alexander
  • McCullough, K.
  • Hodge, E.
  • Ishmael, Sasha
  • Luke, M.
  • Nilsson, E.
  • Rivenc, J.
  • Rouquette, J.F .
  • Ybanez, Ludovic
  • Tassisto, M.
  • Berg, F.
  • Boukayoua, S.
  • Delarche, A.
  • Dunoyer, F.
  • Chaper, C.
  • Kharche, Swapnil
  • Baroille, J.M .
  • Räch, Carsten
  • Reiser, W.
  • Huwer, Stefan
  • Hanebeck, C.
  • Abrell, P.
  • Chikumoto, N.
  • Saugrain, J.M.
  • Allais, Arnaud
  • Ryu, C.H .
  • Lee, J.Y .
  • Cho, J.W.
  • Zong, X.
  • Wang, B.
  • Allweins, K.
  • Herzog, Friedhelm
  • Dioguardi, F.
  • Xiao, L.
  • Qiu, Q.
  • Arndt, T.
  • Palacios, Sebastian
  • Wehr, Mira
  • Wolf, M.J .
  • Bruzek, Christian Eric
  • Marian, Adela
The energy transition requires a tremendous investment in electric grids, mainly due to electrification of heat and mobility sectors and due to the huge expansion of renewable energy. Superconductors offer an extremely high current density while having no resistance. In the past years, the cost-performance of high-temperature superconducting tapes decreased constantly, and the manufacturing capacity was expanded considerably.In parallel, many AC and DC superconducting cables for various applications from low-voltage up to high-voltage levels have been developed, successfully tested and operated in field tests. The availability of the high-temperature superconducting tapes and the increasing need for network expansion result in an increased interest on the development of superconducting cables.In this paper, the most important and most recent R&D activities on superconducting cables are summarized. The paper is structured in four main parts. Firstly, an introduction is given not only on the history of R&D but also on the high-temperature superconducting materials and conductors. The main part shows some selected R&D projects in more detail, while in the third part common issues relevant to all cables like cooling are discussed. The paper ends with contributions to hybrid superconducting cables, where electricity transport is combined with chemical energy carriers like liquid hydrogen.It can be summarized that several projects demonstrated, that superconducting cables can fulfil all technical requirements for a long-term field operation and first permanent installations are realized. Attractive applications for superconducting cables include electric grids, high-current industry bus bars, data centers and aviation., We acknowledge the European Research Council for the ULTRASUPERTAPE Project (ERC-2014-ADG-669504), IMPACT Project (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). We also acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), SUPERPOWER (TED2021-130004B-I00), ‘Severo Ochoa’ Program for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-SCEX), HTS-JOINTS (PDC2022–133208-I00) and PTI + TransEner CSIC programme for Spanish NGEU. The authors also thank the Catalan Government for 2021 SGR 00440., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Screening of REBCO Superconducting Thin Films Fabricated Via Combinatorial Inkjet Printing and TLAG Process

  • Ghiara, Emma
  • Wu, Zeyu
  • Voulhoux, Mahel
  • Mola Bertran, Ona
  • Bertini, Vittorio
  • Torres, Carla
  • Kethamkuzhi, Aiswarya
  • Telles, Guilherme Theophilo
  • Fuentes, Victor
  • Pach, Elzbieta
  • Pop, Cornelia
  • Solano, Eduardo
  • Gupta, Kapil
  • Kiss, Takanobu
  • Obradors, Xavier
  • Puig Molina, Teresa
High-throughput screening has revolutionized material design, enabling the accelerated development and optimization of materials through data-driven approaches. This study employs drop-on-demand inkjet printing to fabricate combinatorial superconducting (Formula presented.) (REBCO, (Formula presented.)) thin films with a controlled compositional gradient, allowing a systematic investigation of Rare Earth composition effects on the Transient Liquid Assisted Growth (TLAG) process. A methodological framework is established for fabricating and characterizing combinatorial REBCO thin films. Automated and synchrotron-based techniques—including Interferometry, EDX, XRD, and Scanning Hall Probe Microscopy (SHPM)—are used to build comprehensive property maps, revealing composition-driven variations in crystal growth and superconducting properties. Furthermore, SEM and STEM confirm REBCO crystal quality and provide deeper material insights at specific combinatorial sample locations. This framework also lays the groundwork for integrating machine learning approaches into the understanding of the TLAG process and predicting the final quality of REBCO superconductive thin films. By bridging combinatorial synthesis, advanced characterization, and data-driven analysis, this study establishes a workflow that can be leveraged in the future to facilitate the scaling-up of TLAG technology for industrial applications., The authors acknowledge funding from the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749), and SMS-INKS (ERC-2022-PoC-101081998), as well as from the EU COST Actions OPERA (CA20116) and SUPERQUMAP (CA21144). Financial support from the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (MICIU/AEI/10.13039/501100011033/FEDER, UE) is also acknowledged for the projects SUPERENERTECH (PID2021-127297OB-C21), the “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and MATRANS42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00). Additional support was provided by the PTI+ TransEner CSIC program under the Spanish NGEU initiative (Regulation (EU) 2020/2094). This project was supported by two doctoral fellowships awarded to E.G. and M.V. from the “la Caixa” Banking Foundation (ID 100010434), under fellowship codes LCF/BQ/DI23/11990065 and LCF/BQ/DFI25/13000042, respectively. A.K. and C.T would like to acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2020-091817 and PRE2022-102078, respectively. E.P. acknowledges the Juan de la Cierva Incorporación Grant IJC2020-045520-I funded by Spanish Ministry of Science, Innovation and Universities and by European Union NextGenerationEU/PRTR. The authors thank the Scientific Services at ICMAB and ICN2 for their technical assistance. They also acknowledge the use of instrumentation and support provided by the Joint Electron Microscopy Center at ALBA (JEMCA), as well as funding from Grant IU16-014206 (METCAM-FIB) to ICN2, funded by the European Regional Development Fund with support from the Ministry of Research and Universities, Generalitat de Catalunya. Finally, the authors acknowledge the ALBA Synchrotron for the provision of beamtime and technical assistance at the NCD-SWEET beamline. Special thanks are given to Maximilian Wolf (AIT Austrian Institute of Technology) for insightful discussions regarding the EDX measurements. The authors acknowledge the use of OpenAI's ChatGPT to assist with language editing and phrasing improvements. No part of the analysis, data interpretation, or scientific conclusions was generated by the tool., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable Self-Assembly of YF Nanoparticles by Citrate-Mediated Ionic Bridges

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Ricart, Susagna
  • Yáñez, Ramón|||0000-0002-2021-0924
Ligand-to-surface interactions are critical factors in surface and interface chemistry to control the mechanisms governing nanostructured colloidal suspensions. In particular, molecules containing carboxylate moieties (such as citrate anions) have been extensively investigated to stabilize metal, metal oxide, and metal fluoride nanoparticles. Using YF nanoparticles as a model system, we show here the self-assembly of citrate-stabilized nanostructures (supraparticles) with a size tunable by temperature. Results from several experimental techniques and molecular dynamics simulations show that the self-assembly of nanoparticles into supraparticles is due to ionic bridges between different nanoparticles. These interactions were caused by cations (e.g., ammonium) strongly adsorbed onto the nanoparticle surface that also interact strongly with nonbonded citrate anions, creating ionic bridges in solution between nanoparticles. Experimentally, we observe self-assembly of nanoparticles into supraparticles at 25 and 100 °C. Interestingly, at high temperatures (100 °C), this citrate-bridge self-assembly mechanism is more efficient, giving rise to larger supraparticles. At low temperatures (5 °C), this mechanism is not observed, and nanoparticles remain stable. Molecular dynamics simulations show that the free energy of a single citrate bridge between nanoparticles in solution is much larger than the thermal energy and in fact is much larger than typical adsorption free energies of ions on colloids. Summarizing our experiments and simulations, we identify as key aspects of the self-assembly mechanism the requirement of NPs with a surface able to adsorb anions and cations and the presence of multidentate ions in solution. This indicates that this new ion-mediated self-assembly mechanism is not specific of YF and citrate anions, as supported by preliminary experimental results in other systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Real-space image of charged patches in tunable-size nanocrystals

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Pérez Rodríguez, Ana|||0000-0002-5778-0103
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Barrena, Esther|||0000-0001-9163-2959
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Ricart, Susagna
The remarkable dual nature of faceted-charge patchy metal fluoride nanocrystals arises from the spontaneous selective coordination of anionic and cationic ligands on the different facets of the nanocrystals. In previous studies, the identification and origin of the charge at the patches were obtained by combining computer simulations with indirect experimental evidence. Taking a step further, we report herein the first direct real-space identification by Kelvin probe force microscopy of the predicted faceted-charge patchy behavior, allowing the image of the dual faceted-charge surfaces. High-resolution transmission electron microscopy reveals the detailed nanocrystal faceting and allows unambiguously inferring the hydrophilic or hydrophobic role of each facet from the identification of the surface atoms exposed at the respective crystallographic planes. The success of the study lies in a foresighted synthesis methodology designed to tune the nanocrystal size to be suitable for microscopy studies and demanding applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid approach to obtain high-quality BaMO perovskite nanocrystals

  • Chamorro, Natalia|||0000-0002-9531-1869
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported. This new synthetic methodology sets a whole general route to successfully tune the sizes of high-quality BaMO (M = Ti 4+, Zr 4+, and Hf 4+) perovskite nanocrystals. Purely cubic-phase nanocrystals (stable in alcohol media) were obtained using controlled water amounts, combining the well-known aqueous sol-gel process with the classic solvothermal method. Exhaustive optimizations revealed feasibility of a fast (1 hour) and reproducible synthesis with small variations in the crystal size or agglomeration parameters. The study also reveals water content as the pivotal factor to achieve this wide range of sizes through a controlled hydrolytic step. Finally, the study of the hydrolytic process made it possible to shed some light on mechanistic insights of this synthetic route. A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBaCuO-x Superconducting Films

  • Rasi, Silvia|||0000-0003-4935-3918
  • Queraltó, Albert
  • Banchewski, Juri|||0000-0002-6654-5527
  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Garcia, Diana
  • Pacheco Aceña, Adrià
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Ricart, Susagna
  • Farjas, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBaCuO (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm -2 at 77 K and growth rates between 100-2000 nm s -1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods. Transient liquid assisted growth (TLAG) is an ultrafast, non-equilibrium growth process governed by kinetic parameters, accessible only through fast in situ characterizations. These methods are used to build kinetic diagrams of phase evolution and growth rate which are unique guides to reach the conditions for ultrafast growth (>1000 nm s - 1) and high-performance superconducting films by combining kinetic and thermodynamic parameters.