Pasar al contenido principal

ANALISIS TERMICO DEL CRECIMIENTO DE CINTAS SUPERCONDUCTORAS DE REBA2CU3O7-X ASISTIDO POR LA FORMACION DE UN LIQUIDO TRANSITORIO

PID2021-127297OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBa2Cu3O7-x Superconducting Films

  • Rasi, Silvia
  • Queraltó, Albert
  • Banchewski, Juri
  • Saltarelli, Lavinia
  • García Franco, Diana
  • Pacheco, Adrià
  • Gupta, Kapil
  • Kethamkuzhi, Aiswarya
  • Soler, Laia
  • Jareño Cerulla, Julia
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBa2 Cu3 O7- x (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm-2 at 77 K and growth rates between 100-2000 nm s-1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964) and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from Spanish Ministry of Science and Innovation with PID2021-127297OB-C21 and PID2021-127297OB-C22, and from Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), and from the Spanish Ministry of Economy and Competitiveness with the SUMATE project (RTI2018-095853-B-C21, RTI2018-095853-B-C22, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE). They also thank the Catalan Government (2017-SGR-1519) and the Catalan energy network XRE4S (2018 XARDI 00002) for their support. L.S., D.G., and A.K. acknowledge financial support from Spanish Ministry of Science, Innovation and Universities through the FPI grant PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.So. and J.J. acknowledge financial support from Spanish Ministry for the FPU grants. S.R. thanks the Universitat de Girona for IFUdG grant and A.Q. thanks the Spanish Ministry of Science, Innovation and Universities (“Juan de la Cierva” postdoctoral fellowship [Grant no. IJC2018-035034-I]). The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza. The authors also acknowledge SOLEIL Synchrotron for provision of synchrotron radiation facilities and are grateful for assistance while using the DiffAbs beamline., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Progress in superconducting REBa2Cu3O7 (RE = rare earth) coated conductors derived from fluorinated solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Palau, Anna
  • Coll, Mariona
  • Gutierrez Royo, Joffre 
  • Farjas, Jordi
  • Bartolomé, Elena
In this work, we review recent progress achieved in the use of chemical solution deposition (CSD) based on fluorinated metalorganic precursors to grow superconducting REBa2Cu3O7 (REBCO) films and coated conductors (CCs). We examine, first of all, the advances in optimizing the steps related to the solutions preparation, deposition and pyrolysis based on novel low-fluorine metalorganic solutions. We show that a new type of multifunctional colloidal solutions including preformed nanoparticles (NPs), can be used to introduce artificial pinning centers (APCs). We analyze how to disentangle the complex physico-chemical transformations occurring during the pyrolysis with the purpose of maximizing the film thicknesses. Understanding the nucleation and growth mechanisms is shown to be critical to achieve a fine tuning of the final microstructure, either using the spontaneous segregation or the colloidal solution approaches, and make industrially scalable this process. Advanced nanostructural studies have deeply modified our understanding of the defect structure and its genealogy. It is remarkable the key role played by the high concentration of randomly distributed and oriented BaMO3 (M = Zr, Hf) NPs which enhance the concentration of APCs, such as stacking faults and the associated partial dislocations. Correlating the defect structure with the critical current density Jc (H,T,θ) allows to reach a tight control of the vortex pinning properties and to devise a general scheme of the vortex pinning landscape in the whole H-T phase diagram. We also refer to the outstanding recent achievements in enhancing the vortex pinning strength by shifting the carrier concentration in REBCO films towards the overdoped state, where the pinning energy is maximum and so, record values of critical current densities are achieved. This confirms the performance competitiveness of nanocomposite CCs prepared through the CSD route. We conclude with a short summary of the progress in scaling the CC manufacturing using fluorinated solutions., Authors acknowledge the European Union Research Council for EUROTAPES (EU-FP7-NMP-LA-2012-280432) and FASTGRID (EU-H2020, 721019) projects and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144); the European Research Council for ULTRASUPERTAPE (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998) projects. Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for COACHSUPENERGY project (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R), SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22), SUPERENERTECH (PID2021-127297OB-C21, PID2021-127297OB-C22) and PID2022-138492NB-I00, FUNMAT and FUNFUTURE ICMAB 'Severo Ochoa' Program for Centers of Excellence in R&D (SEV-2015-0496, CEX2019-000917-S) and HTS-JOINTS (PDC2022-133208-I00). They also thank the PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and Catalan Government for 2017 SGR 1519 and 2021 SGR 00440 and that of Aragon for RASMIA (E12-23R)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Liquid Composition in the Transient Liquid Assisted Growth of Superconducting YBa2Cu3O7-δ Films

  • Saltarelli, Lavinia
  • García Franco, Diana
  • Soler, Laia
  • Pach, Elzbieta
  • Gupta, Kapil
  • Sánchez Rodríguez, Daniel
  • Aguilar, Jordi
  • Fuentes, Víctor
  • Solano, Eduardo
  • Mocuta, Cristian
  • Farjas, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
The unparalleled loss-less electrical current conduction of high-temperature superconducting (HTS) materials encourages research on YBa2Cu3O7-𝛿 (YBCO) to unravel opportunities toward numerous applications. Nonetheless, production costs and throughput of the commercialized HTS Coated Conductors (CCs) are still limiting a worldwide spread. Transient liquid assisted growth (TLAG) is a non-equilibrium process displaying ultrafast growth rate which, when combined with chemical solution deposition (CSD), is emerging as a strong candidate to reduce the cost/performance ratio of YBCO superconductors. This study explores the influence of the (Ba:Cu) molar ratio of the transient liquid composition on the nucleation and growth mechanisms of TLAG. This enables an in-depth analysis of the critical role of the yttrium supersaturation in the transient liquids considering the out-of-equilibrium kinetic character of TLAG. Advanced characterization techniques, including in situ synchrotron X-ray diffraction, coupled to a multi-parameter analysis of the contributions to the physical performance, elucidate the influence of transient liquid supersaturation as driving force toward YBCO nucleation and growth. Understanding the fundamental role played by the initial ink composition allows to disentangle how to reach high superconducting performance. The fabrication of high-performance YBCO films through this novel, high-throughput growth methodology promotes the use of HTS materials in large scale power applications., Authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749), SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), “Severo Ochoa” Programs for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-S), and HTS-JOINTS (PDC2022-133208-I00), PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and REBCOTLAG (PID2021-127297OB-C22). They also thank the Catalan Government for 2021 SGR 00440. L.S. and D.G. acknowledge financial support from Spanish Ministry of Science, Innovation, and Universities through the FPI grant PRE2019-090621 and PRE2018-084537, respectively. D.S.R. acknowledges the support received from the Beatriu de Pinós Programme and the Ministry of Research and Universities of the Government of Catalonia (Fellowship BP00069). E.P. acknowledges the Juan de la Cierva Incorporación Grant IJC2020-045520-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”. Authors thank the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and Scientific Services at the University of Girona. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Moreover, authors acknowledge SOLEIL Synchrotron and ALBA Synchrotron for the provision of radiation facilities and are grateful for the assistance received when conducting experiments at DiffAbs and NCD-SWEET Beamlines., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Progress in superconducting REBa2Cu3O7 (RE = rare earth) coated conductors derived from fluorinated solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Palau, Anna
  • Coll, Mariona
  • Gutiérrez, Joffre
  • Farjas Silva, Jordi
  • Bartolomé, Elena
In this work, we review recent progress achieved in the use of chemical solution deposition (CSD) based on fluorinated metalorganic precursors to grow superconducting REBa 2 Cu 3 O 7 (REBCO) films and coated conductors (CCs). We examine, first of all, the advances in optimizing the steps related to the solutions preparation, deposition and pyrolysis based on novel low-fluorine metalorganic solutions. We show that a new type of multifunctional colloidal solutions including preformed nanoparticles (NPs), can be used to introduce artificial pinning centers (APCs). We analyze how to disentangle the complex physico-chemical transformations occurring during the pyrolysis with the purpose of maximizing the film thicknesses. Understanding the nucleation and growth mechanisms is shown to be critical to achieve a fine tuning of the final microstructure, either using the spontaneous segregation or the colloidal solution approaches, and make industrially scalable this process. Advanced nanostructural studies have deeply modified our understanding of the defect structure and its genealogy. It is remarkable the key role played by the high concentration of randomly distributed and oriented BaMO 3 (M = Zr, Hf) NPs which enhance the concentration of APCs, such as stacking faults and the associated partial dislocations. Correlating the defect structure with the critical current density J c ( H,T,θ ) allows to reach a tight control of the vortex pinning properties and to devise a general scheme of the vortex pinning landscape in the whole H-T phase diagram. We also refer to the outstanding recent achievements in enhancing the vortex pinning strength by shifting the carrier concentration in REBCO films towards the overdoped state, where the pinning energy is maximum and so, record values of critical current densities are achieved. This confirms the performance competitiveness of nanocomposite CCs prepared through the CSD route. We conclude with a short summary of the progress in scaling the CC manufacturing using fluorinated solutions, Authors acknowledge the European Union Research Council for EUROTAPES (EU-FP7-NMP-LA-2012-280432) and FASTGRID (EU-H2020, 721019) projects and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144); the European Research Council for ULTRASUPERTAPE (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998) projects. Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for COACHSUPENERGY project (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R), SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22), SUPERENERTECH (PID2021-127297OB-C21, PID2021-127297OB-C22) and PID2022-138492NB-I00, FUNMAT and FUNFUTURE ICMAB 'Severo Ochoa' Program for Centers of Excellence in R&D (SEV-2015-0496, CEX2019-000917-S) and HTS-JOINTS (PDC2022-133208-I00). They also thank the PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and Catalan Government for 2017 SGR 1519 and 2021 SGR 00440 and that of Aragon for RASMIA (E12-23R)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Chemical and Microstructural Nanoscale Homogeneity in Superconducting YBa2Cu3O7-x Films Derived from Metal-Propionate Fluorine-free Solutions

  • Saltarelli, Lavinia
  • Gupta, Kapil
  • Rasi, Silvia
  • Kethamkuzhi, Aiswarya
  • Queraltó, Albert
  • Garcia, Diana
  • Gutierrez, Joffre
  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
Research involved in developing alternative energy sources has become a necessity to face global warming. In this context, superconductivity is an appealing solution to enhance clean electrical energy provided that lower production costs can be attained. By implementation of chemical solution deposition techniques and high-throughput growth methods, low-cost nanostructured epitaxial cuprate superconductors are timely candidates. Here, we present a versatile and tunable solution method suitable for the preparation of high-performance epitaxial cuprate superconducting films. Disregarding the renowned trifluoroacetate route, we center our focus on the transient liquid-assisted growth (TLAG) that meets the requirement of being a greener chemical process together with ultrafast growth rates beyond 100 nm/s. We developed a facile, fast, and cost-effective method, starting from the synthesis of metal-propionate powders of Y, Ba, and Cu of high purity and high yields, being the precursors of the fluorine-free solutions, which enable the chemical and microstructural nanoscale homogeneity of YBa2Cu3O7-x (YBCO) precursor films. These solutions present endured stability and enable precise tunability of the composition, concentration, porosity, and film thickness. Homogeneous precursor films up to thicknesses of 2.7 μm through eight layer multidepositions are demonstrated, thus establishing the correct basis for epitaxial growth using the fast kinetics of the TLAG process. YBCO films of 500 nm thickness with a critical current density of 2.6 MA/cm2 at 77 K were obtained, showing the correlation of precursor film homogeneity to the final YBCO physical properties, The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964), and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Programme for Centres of Excellence in FUNFUTURE (CEX2019-000917-S), SUMATE projects (RTI2018-095853-B-C21, RTI2018-095853-B-C22 co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE), and SUPERENERTECH projects (PID2021-127297OB-C21 and PID2021-127297OB-C22). The authors also thank support from the Catalan Government with 2017-SGR-1519 and Catalan energy network XRE4S (2018 XARDI 00002). L.S., D.G., and A.K. acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.S. and D.G. would like to thank the UAB PhD program in Materials Science, and A.K. would like to thank the UAB PhD program in Physics. A.Q. would like to thank the Spanish Ministry of Science, Innovation and Universities [“Juan de la Cierva” postdoctoral fellowship (grant no. IJC2018-035034-I)]. The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. The content of this paper is the object of a European patent application no. EP22382741.1 filed on 29/07/2022
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Role of Liquid Composition in the Transient Liquid Assisted Growth of Superconducting YBa2Cu3O7-δ Films

  • Saltarelli, Lavinia
  • García, Diana
  • Soler Bru, Laia
  • Pach, Elzbieta
  • Gupta, Kapil
  • Sánchez Rodríguez, Daniel
  • Aguilar, Jordi
  • Fuentes, Víctor
  • Solano, Eduardo
  • Mocuta, Cristian
  • Farjas Silva, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
The unparalleled loss-less electrical current conduction of high-temperature superconducting (HTS) materials encourages research on YBa2Cu3O7−𝛿 (YBCO) to unravel opportunities toward numerous applications. Nonetheless, production costs and throughput of the commercialized HTS Coated Conductors (CCs) are still limiting a worldwide spread. Transient liquid assisted growth (TLAG) is a non-equilibrium process displaying ultrafast growth rate which, when combined with chemical solution deposition (CSD), is emerging as a strong candidate to reduce the cost/performance ratio of YBCO superconductors. This study explores the influence of the (Ba:Cu) molar ratio of the transient liquid composition on the nucleation and growth mechanisms of TLAG. This enables an in-depth analysis of the critical role of the yttrium supersaturation in the transient liquids considering the out-of-equilibrium kinetic character of TLAG. Advanced characterization techniques, including in situ synchrotron X-ray diffraction, coupled to a multi-parameter analysis of the contributions to the physical performance, elucidate the influence of transient liquid supersaturation as driving force toward YBCO nucleation and growth. Understanding the fundamental role played by the initial ink composition allows to disentangle how to reach high superconducting performance. The fabrication of high-performance YBCO films through this novel, high-throughput growth methodology promotes the use of HTS materials in large scale power applications, Research funding: EU COST actions. Grant Numbers: CA20116, CA-21144; Spanish Ministry of Science and Innovation and the European Regional Development Fund. Grant Numbers: PID2021-127297OB-C21, FUNFUTURECEX2019-000917-S, Matrans42CEX2023-001263-S, PDC2022-133208-I00; Spanish Ministry of Science. Grant Numbers: PRE2019-090621, PRE2018-084537; Departament d'Innovació, Universitats i Empresa, Generalitat de Catalunya. Grant Number: BP00069; Direcció General de Recerca, Generalitat de Catalunya. Grant Number: 2021 SGR 00440; Fundación General CSIC. Grant Number: NGEU (Regulation (EU) 2020/2094); Ministerio de Ciencia e Innovación. Grant Numbers: PID2021-127297OB-C22, IJC2020-045520-I; HORIZON EUROPE European Research Council. Grant Numbers: ERC-2022-PoC-101081998, ERC-2019-PoC-8749 & HORIZON EUROPE European Innovation Council. Grant Number: ERC-2014-ADG-669504
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBaCuO-x Superconducting Films

  • Rasi, Silvia|||0000-0003-4935-3918
  • Queraltó, Albert
  • Banchewski, Juri|||0000-0002-6654-5527
  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Garcia, Diana
  • Pacheco Aceña, Adrià
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Ricart, Susagna
  • Farjas, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBaCuO (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm -2 at 77 K and growth rates between 100-2000 nm s -1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods. Transient liquid assisted growth (TLAG) is an ultrafast, non-equilibrium growth process governed by kinetic parameters, accessible only through fast in situ characterizations. These methods are used to build kinetic diagrams of phase evolution and growth rate which are unique guides to reach the conditions for ultrafast growth (>1000 nm s - 1) and high-performance superconducting films by combining kinetic and thermodynamic parameters.