Pasar al contenido principal

CINTAS SUPERCONDUCTORAS Y HETEROESTRUCTURAS DE OXIDOS DE BAJO COSTE PARA EL RETO ENERGETICO

MAT2014-51778-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 85
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Torsional dependence of the critical current in 2G tapes

  • Sotelo, G. G.
  • Granados, X.
  • Carrera i Vilanova, Miquel
  • López López, José
Since the second-generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year, the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field, and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken into account since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications such as fault-current limiters, superconducting magnetic energy storage, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, this paper studies the electrical and mechanical properties of 12-mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU under the Project EU FP7-2013- ICT-609029 FORTISSIMO, Project EU-FP7 NMP-LA-2012-280432 EUROTAPES, Project Eurofusion PPPT-WPMAG 2014, and EU COST ACTIONS MP1201and MP1014; by MINECO under Grant RTC-2014-1740-3 and Grant MAT2014-51778-C2-1-R, by Generalitat de Catalunya (Xarmae), and by CNPq (Ciencia sem Fronteiras).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Singular spectrum analysis filtering and Fourier inversion: an efficient and fast way to improve resolution and quality of current density maps with low-cost Hall scanning systems

  • Amorós, J.
  • Duran, Arnau
  • Carrera i Vilanova, Miquel
  • López, Josep
  • Granados, X.
We provide a Biot–Savart inversion scheme that, for any two-dimensional, or bulk with planar crystallization, high-temperature superconducting (HTS) sample, determines current density maps with a higher resolution and accuracy than previous procedures and at a fraction of its computational cost. The starting point of our scheme is a Hall scanning microscopy map of the out-of-plane component of the magnetic field generated by the current. Such maps are noisy in scans of real samples with commercial-grade equipment, and their error is the limiting factor in any Biot–Savart inversion scheme. The main innovation of our proposed scheme is a singular spectrum analysis (SSA) filtering of the Hall probe maps, which cancels measurement errors such as noise or drifts without introducing any artifacts in the field map. The SSA filtering of the Hall probe data is so successful in this task that the resulting magnetic field map does not require an overdetermined QR inversion, allowing Fourier inversion of the Biot–Savart problem. Our implementation of SSA filtering of the Hall scan measurements, followed by Biot–Savart inversion using the fast Fourier transform (FFT), is applied to both simulations and real samples of HTS tape stacks. The algorithm works in cases where ill conditioning ruled out the application of Fourier inversion, and achieves a finer resolution for a fraction of the cost of the QR inversion used to date. The computation passes physical and statistical validity tests in all cases, and in three-dimensional samples it is shown to yield the average, with a depth-dependent weight, of the current density circulating in the different layers of the sample., We acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by FEDER), GAP project (MTM2015-69135-P) and SUPERINKS project (RTC-2015-3640-3, co-financed by FEDER); the European Union for the FASTGRID project (H2020-NMBP-18-2016-IA-72109) and WPMAG 5 (H2020-EUROfusion); and the Catalan Government with 2017-SGR-932, 2014-SGR-753 and Xarmae.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth of ferroelectric Ba0.8Sr0.2TiO3 epitaxial films by UV pulsed laser irradiation of chemical solution derived precursor layers

  • Queraltó, Albert
  • Pérez del Pino, Ángel
  • Mata, Maria de la
  • Arbiol, Jordi
  • Tristany, Mar
  • Gómez Rodríguez, Andrés
  • Obradors, Xavier
  • Puig Molina, Teresa
© 2015 AIP Publishing LLC. Highly crystalline epitaxial Ba<inf>0.8</inf>Sr<inf>0.2</inf>TiO<inf>3</inf> (BST) thin-films are grown on (001)-oriented LaNiO<inf>3</inf>-buffered LaAlO<inf>3</inf> substrates by pulsed laser irradiation of solution derived barium-zirconium-titanium precursor layers using a UV Nd:YAG laser source at atmospheric conditions. The structural analyses of the obtained films, studied by X-ray diffractometry and transmission electron microscopy, demonstrate that laser processing allows the growth of tens of nm-thick BST epitaxial films with crystalline structure similar to that of films obtained through conventional thermal annealing methods. However, the fast pulsed nature of the laser employed leads to crystallization kinetic evolution orders of magnitude faster than in thermal treatments. The combination of specific photothermal and photochemical mechanisms is the main responsible for the ultrafast epitaxial laser-induced crystallization. Piezoresponse microscopy measurements demonstrate equivalent ferroelectric behavior in laser and thermally annealed films, being the piezoelectric constant ∼25 pm V<sup>-1</sup>., This work was financed by the Ministry of Economy and Competitiveness under the Project Nos. MAT2011-28874-C02-01, ENE2014-56109-C3-3-R, and MAT2014-51778-C2-1-R and Consolider Nanoselect CSD2007-00041 by Generalitat de Catalunya (2009 SGR 770, 2014 SGR 753 and Xarmae) and by the Spanish National Research Council under the Contract No. 200960I015. A.Q. and M.d.l.M. are also grateful for JAE-Predoc fellowship and European Social Fund program. Fruitful discussions with Dr. Susagna Ricart for solution synthesis are also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast crystallization of Ce0.9Zr0.1O2-y epitaxial films on flexible technical substrates by pulsed laser irradiation of chemical solution derived precursor layers

  • Queraltó, Albert
  • Pérez del Pino, Ángel
  • de la Mata, M
  • Arbiol, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
© 2015 American Chemical Society. The epitaxial growth of Ce0.9Zr0.1O2-y (CZO) thin-films on yttria-stabilized zirconia (YSZ) (001) single crystal and YSZ (001)/stainless steel (YSZ/SS) technological substrates is investigated by pulsed laser irradiation of solution-derived cerium-zirconium precursor layers using a UV Nd:YAG laser source at atmospheric conditions. The influence of laser processing parameters on the morphological and structural properties of the obtained films is studied by atomic force and transmission electron microscopies, as well as X-ray diffractometry. The analyses performed demonstrate that laser treatments enable the epitaxial growth of tens of nanometers thick CZO films with a crystallization kinetic process several orders of magnitude faster than that of conventional thermal annealing. Fully epitaxial films are attained using stainless steel (SS) flexible tapes as a substrate. Even though photochemical mechanisms are not fully discarded, it is concluded that photothermal processes are the main contribution responsible for the fast epitaxial crystallization., This work was financed by the Ministry of Economy and Competitiveness under the projects MAT2011-28874-C02-01, MAT2014-51778-C2-1-R and Consolider Nanoselect CSD2007-00041, by Generalitat de Catalunya (2009 SGR 770, 2014 SGR 753 and Xarmae) and by the Spanish National Research Council under the Contract No. 200960I015. AQ and MdlM are also grateful for JAE-Predoc fellowship and European Social Fund program. We acknowledge Bruker Corporation for the supply of the technical substrates through the NMP3-LA-2012-280432 project., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial YBa2Cu3O7-x nanocomposite thin films from colloidal solutions

  • Cayado, Pablo
  • Vallés, Ferran
  • Mundet, Bernat
  • Coll, Mariona
  • Ricart, Susagna
  • Palau, Anna
  • Gázquez, Jaume
  • Puig Molina, Teresa
  • Obradors, Xavier
A methodology of general validity to prepare epitaxial nanocomposite films based on the use of colloidal solutions containing different crystalline preformed oxide nanoparticles (ex situ nanocomposites) is reported. The trifluoroacetate (TFA) metal-organic chemical solution deposition route is used with alcoholic solvents to grow epitaxial YBaCuO (YBCO) films. For this reason stabilizing oxide nanoparticles in polar solvents is a challenging goal. We have used scalable nanoparticle synthetic methodologies such as thermal and microwave-assisted solvothermal techniques to prepare CeO and ZrO nanoparticles. We show that stable and homogeneous colloidal solutions with these nanoparticles can be reached using benzyl alcohol, triethyleneglycol, nonanoic acid, trifluoroacetic acid or decanoic acid as protecting ligands, thereby allowing subsequent mixing with alcoholic TFA solutions. An elaborate YBCO film growth analysis of these nanocomposites allows the identification of the different relevant growth phenomena, e.g. nanoparticles pushing towards the film surface, nanoparticle reactivity, coarsening and nanoparticle accumulation at the substrate interface. Upon mitigation of these effects, YBCO nanocomposite films with high self-field critical currents (J ∼ 3-4 MA cm at 77 K) were reached, indicating no current limitation effects associated with epitaxy perturbation, while smoothed magnetic field dependences of the critical currents at high magnetic fields and decreased effective anisotropic pinning behavior confirm the effectiveness of the novel developed approach to enhance vortex pinning. In conclusion, a novel low cost solution-derived route to high current nanocomposite superconducting films and coated conductors has been developed with very promising features., All authors acknowledge the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project). ICMAB acknowledges MINECO (MAT2014-51778-C2-1-R) and Generalitat de Catalunya (2014SGR 753 and Xarmae). UGhent acknowledges the Special Research Fund (BOF), the Research Foundation Flanders (FWO) and the Institute for the Promotion of Innovation through Science and Technology in Flanders (IWT). TEM microscopy work was conducted in the Catalan Institute of Nanoscience and Nanotechnology (ICN2). The authors acknowledge the ICN2 Electron Microscopy Division for offering access to their instruments and expertise. Part of the STEM microscopy work was conducted in 'Laboratorio de Microscopias Avanzadas' at the Instituto de Nanociencia de Aragon—Universidad de Zaragoza. The authors acknowledge the LMA-INA for offering access to their instruments and expertise. JG and MC also acknowledge the Ramon y Cajal program (RYC-2012-11709 and RYC-2013-12448 respectively)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geometrically controlled ratchet effect with collective vortex motion

  • Rouco, Víctor
  • Palau, Anna
  • Monton, Carlos M.
  • Del Valle, Nuria
  • Sánchez, Àlvar
  • Obradors, Xavier
  • Puig Molina, Teresa
© 2015 IOP Publishing Ltd and Deutsche Physikalische Gesellschaft. Rectified flux motion arising from the collective effect of many interacting vortices is obtained in a specially designed superconducting device. Ratchet structures with different asymmetric pinning potentials are generated by tuning the size, depth, and distribution of triangular blind-antidots in a high-temperature superconducting film. We experimentally and theoretically demonstrate that the amplitude and sign of the rectified vortex motion can be finely tuned with the pattern geometry. Two different dynamical regimes depending on the nature of vortices initiating the dissipation are identified, which can control the rectified vortex motion., This work has been supported by MINECO(MAT2014-51778-C2-1R, MAT2012-35370, CSD2007-0041, IPT- 2011-1090-920000), Generalitat de Catalunya (SGR2014-00753, 2014SGR150, XaRMAE), EU-FP7 NMP-LA- 2012-280432 EUROTAPES project and Cost Action MP1201.VR acknowledges the JAE-CSIC PhD grant. AS acknowledges funding from an ICREA Academia award., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultraviolet pulsed laser crystallization of Ba0.8Sr0.2TiO3 films on LaNiO3-coated silicon substrates

  • Queraltó, Albert
  • Pérez del Pino, Ángel
  • Mata, Maria de la
  • Tristany, Mar
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Trolier-McKinstry, Susan
In this work, BaSrTiO (BST) films on LaNiO-buffered SiO/Si (LNO/SiO/Si) substrates were crystallized by pulsed laser irradiation. Solution-derived amorphous barium-strontium-titanate precursor layers were crystallized with a KrF excimer laser in oxygen ambient at fluences ranging from 50 to 75 mJ cm. With the substrate temperature set to 500 °C, the number of pulses and film thickness were varied until high-quality crystallinity could be achieved. It was found that films with a thickness of 40 nm are fully crystallized with a uniaxial {00l} orientation which is predetermined by the LaNiO orientation. On the other hand, for 160 nm thick films, crystallization was observed after 12,000 pulses in the 70 nm close to the surface, while the rest of the film remained amorphous. The large temperature difference between the film surface and interface due to the low thermal conductivity of the amorphous BST is suggested as the origin of this behavior. Films thicker than 80 nm cracked on crystallization due to the stress caused by the different thermal expansion coefficients of film and substrate, as well as the large temperature variations within the BST film., This work was financed by the Ministry of Economy and Competitiveness under the projects MAT2011-28874-C02-01, MAT2014-51778-C2-1-R, ENE2014-56109-C3-3- Rand Consolider Nanoselect CSD2007-00041, and by Generalitat de Catalunya (2015SGR753 and Xarmae). AQ and Mdl Mare also gratefulforJAE-Predocfellowship (E-08-2012-1321248) and European Social Fund (E-08-2013-1028356)program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous formation of spiral-like patterns with distinct periodic physical properties by confined electrodeposition of Co-In disks

  • Golvano-Escobal, Irati
  • Gonzalez Rosillo, Juan Carlos
  • Domingo, Neus
  • Illa, Xavi
  • López-Barbera, José Francisco
  • Fornell, Jordina
  • Suriñach, Santiago
  • Baró, María Dolors
  • Puig Molina, Teresa
  • Pané, Salvador
  • Nogués, Josep
  • Sort, Jordi
Golvano-Escobal, Irati et al., Spatio-temporal patterns are ubiquitous in different areas of materials science and biological systems. However, typically the motifs in these types of systems present a random distribution with many possible different structures. Herein, we demonstrate that controlled spatio-temporal patterns, with reproducible spiral-like shapes, can be obtained by electrodeposition of Co-In alloys inside a confined circular geometry (i.e., in disks that are commensurate with the typical size of the spatio-temporal features). These patterns are mainly of compositional nature, i.e., with virtually no topographic features. Interestingly, the local changes in composition lead to a periodic modulation of the physical (electric, magnetic and mechanical) properties. Namely, the Co-rich areas show higher saturation magnetization and electrical conductivity and are mechanically harder than the In-rich ones. Thus, this work reveals that confined electrodeposition of this binary system constitutes an effective procedure to attain template-free magnetic, electric and mechanical surface patterning with specific and reproducible shapes., This work has been partially funded by the 2014-SGR-1015, 2014-SGR-1216 and 2014-SGR-753 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R, MAT2014-51778-C2-1-R and FIS2013-48668-C2-1-P from the Spanish Ministerio de Economía y Competitividad (MINECO) and the ‘Fondo Europeo de Desarrollo Regional’ (FEDER). Dr. Eva Pellicer and Dr. Neus Domingo are also grateful to MINECO for the “Ramon y Cajal” contracts (RYC-2012-10839 and RYC-2010-06365 respectively). ICN2 and ICMAB acknowledge support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295 and Grant SEV-2015-0496, respectively). The PEEM experiments were performed at CIRCE beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Torsional Dependence of the Critical Current in 2G Tapes

  • Sotelo, Guilherme Gonçalves
  • Granados, Xavier
  • Carrera, Miquel
  • López López, Josep
Since the second generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken in account, since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications as fault current limiters, SMES, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, the present work studies the electrical and mechanical properties of 12 mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU (EU FP7-2013-ICT-609029 FORTISSIMO project, EU-FP7 NMP-LA-2012-280432 EUROTAPES project, Eurofusion PPPT-WPMAG 2014 and EU COST COST ACTIONS MP1201and MP1014), MINECO (RTC-2014-1740-3 and MAT2014-51778-C2-1-R), Generalitat de Catalunya (Xarmae) and to CNPq (Ciencia sem Fronteiras)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformal oxide nanocoatings on electrodeposited 3D porous Ni films by atomic layer deposition

  • Zhang, J.
  • Coll, Mariona
  • Puig Molina, Teresa
  • Pellicer, Eva
  • Sort, Jordi
A versatile chemical synthesis procedure to obtain Al2O3 and Co2FeO4 nanolayers conformally coating a three-dimensional (3D) porous Ni film is presented. First, porous Ni is grown by hydrogen bubble template-assisted electrodeposition. Subsequently, Al2O3 and Co2FeO4 layers, with thickness ranging from 5 nm to 25 nm, are directly deposited onto the pore walls by atomic layer deposition, while maintaining the porous architecture and magnetic properties of the Ni scaffold. The crystal structure, thickness and distribution of elements within the composite coatings are investigated in detail. The resulting magnetic and wettability properties are assessed. Contact angle tests reveal that 3D porous Ni films become more hydrophilic after coating with Al2O3 or Co2FeO4. From a technological point of view, the obtained composite porous films could be appealing for application in magnetically actuated micro/nano-electromechanical systems (MEMS/NEMS) or bio-MEMS/NEMS, among others., This work has been partially funded by the 2014-SGR-1015 and 2014-SGR-150 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R and MAT2014-51778-C2-1-R projects from the Spanish Ministerio de Economı´a y Competitividad (MINECO) and associated FEDER, and the SPIN-PORICS 2014- Consolidator Grant from the European Research Council (Grant Agreement 648454). J. Z. is grateful to the China Scholarship Council (CSC) for the PhD grant. E. P. and M. C. are grateful to MINECO for the ‘‘Ramon y Cajal’’ contract (RYC-2012-10839, RYC-2013-12448). ICMAB acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encoding Magnetic States in Monopole-Like Configurations Using Superconducting Dots

  • Palau, Anna
  • Obradors, Xavier
  • Puig Molina, Teresa
Palau Masoliver, Anna et al., A large manifold of nontrivial spin textures, including the stabilization of monopole-like fields, are generated by using a completely new and versatile approach based on the combination of superconductivity and magnetism. Robust, stable, and easily controllable complex spin structures are encoded, modified, and annihilated in a continuous magnetic thin film by defining a variety of magnetic states in superconducting dots., This work has been supported by MINECO (MAT2014-51778-C2-1R, MAT2012-35370, CSD2007-0041), Generalitat de Catalunya (2014- SGR-00753, 2014-SGR-150, 2014-PROD00059), European Seventh Framework Program (FP7/2007-2013) under grant agreement 312284, EU-NMP-LA-2012-280432EUROTAPES project and Cost Action MP1201. A. Sanchez acknowledges a grant from ICREA Academia, funded by the Generalitat de Catalunya. ICMAB acknowledge the Severo Ochoa Center of Excellence mentioned from MINECO. A. Palau and S. Valencia contributed equally to this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-xGdxO2-y nanowires derived from chemical solutions

  • Queraltó, Albert
  • Mata, Maria de la
  • Martínez Orellana, Lidia
  • Magén, César
  • Gibert, Marta
  • Arbiol, Jordi
  • Hühne, Ruben
  • Obradors, Xavier
  • Puig Molina, Teresa
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented CeGdO (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO[0-11](011)LAO[100] growth orientation, with the enlargement occurring along the [0-11]CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2013-0295 and SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and the projects MAT2011-28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect (CSD2007-00041), and from the Catalan Government (2014-SGR-753, 2014-SGR-1638 and Xarmae). AQ and MdlM are also grateful for JAE-Predoc fellowship from CSIC (E-08-2012-1321248 and E-08-2013-1028356, co-financed by the European Social Fund). Authors also thank the INA-LMA facilities for the use of the advanced (S)TEM equipment., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Melting temperature of YBa2Cu3O7-x and GdBa2Cu3O7-x at subatmospheric partial pressure

  • Taïr, Fadila
  • Carreras, Laura
  • Camps, Jaume
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Calleja Lázaro, Alberto
  • Puig Molina, Teresa
  • Obradors, Xavier
The melting temperature, Tm, of YBa2Cu3O7 x and GdBa2Cu3O7 x superconductor ceramic compounds has been measured by differential thermal analysis (DTA) over a large oxygen partial pressure range of five orders of magnitude (2$10 5 < PO2 < 1 bar). It is shown that the DTA peak and endset temperatures are closer to Tm than the onset temperature. Correct measurement of Tm requires low heating rates and subatmospheric pressure conditions to avoid temperature shifts due to local oxygen overpressure and kinetic effects., This work was funded by the Spanish Programa Nacional de Materiales through projects MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R. We also acknowledge: the Center of Excellence award Severo Ochoa SEV-2015-0496, SGR753 and SGR948 from the Generalitat of Catalunya and European Union through projects Eurotapes (EU-FP7 NMP-LA-2012-280432) and Ultrasupertape (ERC ADG-2014-669504). FT acknowledges financial support from USTO. The authors are indebted to Dr. Joan Pere López Olmedo and Dr. Xavier Fontrodona of STR, University of Girona, for their technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unique nanostructural features in Fe, Mndoped YBCO thin films

  • Meledin, A.
  • Turner, S.
  • Cayado, Pablo
  • Mundet, Bernat
  • Solano, Eduardo
  • Ricart, Susagna
  • Ros, Josep
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Tendeloo, Gustaaf van
An attempt to grow a thin epitaxial composite film of YBa2Cu3O7-δ (YBCO) with spinel MnFe2O4 (MFO) nanoparticles on a LAO substrate using the CSD approach resulted in a decomposition of the spinel and various doping modes of YBCO with the Fe and Mn cations. These nanostructural effects lead to a lowering of Tc and a slight Jc increase in field. Using a combination of advanced transmission electron microscopy (TEM) techniques such as atomic resolution high-angle annular dark field scanning transmission electron microscopy, energy dispersive X-ray spectroscopy and electron energy-loss spectroscopy we have been able to decipher and characterize the effects of the Fe and Mn doping on the film architecture. The YBaCuFeO5 anion-deficient double perovskite phase was detected in the form of 3D inclusions as well as epitaxially grown lamellas within the YBCO matrix. These nano-inclusions play a positive role as pinning centers responsible for the Jc/Jsf (H) dependency smoothening at high magnetic fields in the YBCO-MFO films with respect to the pristine YBCO films., The authors gratefully acknowledge Prof. Dr. A. Abakumov and Dr. J. Gazquez for discussions and corrections. Part of this work was performed within the framework of the EUROTAPES project (FP7-NMP.2011.2.2-1 Grant no. 280432), funded by the European Union. ICMAB research was financed by the Ministry of Economy and Competitiveness, and FEDER funds under the projects MAT2011-28874-C02-01, MAT2014-51778-C2-1-R, ENE2014-56109-C3-3-R and Consolider Nanoselect CSD2007-00041, and by Generalitat de Catalunya (2009 SGR 770, 2015 SGR 753 and Xarmae). ICMAB acknowledges support from Severo Ochoa Program (MINECO, Grant SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast epitaxial growth kinetics in functional oxide thin films grown by pulsed laser annealing of chemical solutions

  • Queraltó, Albert
  • Pérez del Pino, Ángel
  • Mata, Maria de la
  • Arbiol, Jordi
  • Tristany, Mar
  • Obradors, Xavier
  • Puig Molina, Teresa
The crystallization process and physical properties of different functional oxide thin films (CeZrO, LaNiO, BaSrTiO, and LaSrMnO) on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) are studied by pulsed laser annealing (PLA). A Nd:YAG laser source (λ = 266 nm, 10 Hz and τ ∼3 ns) is employed to crystallize chemical solution deposited (CSD) amorphous/nanocrystalline films under atmospheric conditions. We provide new insight on the influence of photochemical and photothermal interactions on the epitaxial crystallization kinetics of oxide thin films during the transformation from amorphous/polycrystalline material (i.e., atomic diffusion, epitaxial growth rates, and activation energies of nucleation and crystallization). The epitaxial growth is investigated by varying the laser fluence and the applied number of pulses. The morphology, structure, and epitaxial evolution of films are evaluated by means of atomic force and transmission electron microscopies and X-ray diffraction. Highly epitaxial oriented films of 20-40 nm in thickness are obtained by PLA. The crystallization kinetics of laser treatments is determined to be orders of magnitude faster than thermal treatments with similar activation energies (1.5-4.1 eV), mainly due to the large temperature gradients inducing modified atomic diffusion mechanisms derived mainly from photothermal interactions, as well as a minor contribution of photochemical effects. The fast heating rates achieved by PLA also contribute to the fast epitaxial growth due to reduced coarsening of polycrystalline material. The measurement of the physical properties (electrical resistivity and magnetism) of laser processed CSD films has revealed significantly good functionalities, close to those of thermally grown films, but with much shorter processing times., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2013-0295 and SEV-2015- 0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and the projects MAT2011-28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect CSD2007-00041, and from the Catalan Government with 2014-SGR-753, 2014-SGR-1638 and Xarmae. AQ and MdlM are also grateful to CSIC and European Social Fund program for JAE-Predoc fellowships (E-08-2012-1321248 and E-08-2013-1028356)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the Influence of the Electronic Structure on the Crystal Structure of a TTF-PTM Radical Dyad

  • Vela Llausi, Sergi
  • Souto Salom, Manuel
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
The understanding of the crystal structure of organic compounds, and its relationship to their physical properties, have become essential to design new advanced molecular materials. In this context, we present a computational study devoted to rationalize the different crystal packing displayed by two closely related organic systems based on the TTF-PTM dyad (TTF = tetrathiafulvalene, PTM = polychlorotriphenylmethane) with almost the same molecular structure but a different electronic one. The radical species (1), with an enhanced electronic donor–acceptor character, exhibits a herringbone packing, whereas the nonradical protonated analogue (2) is organized forming dimers. The stability of the possible polymorphs is analyzed in terms of the cohesion energy of the unit cell, intermolecular interactions between pairs, and molecular flexibility of the dyad molecules. It is observed that the higher electron delocalization in radical compound 1 has a direct influence on the geometry of the molecule, which seems to dictate its preferential crystal structure., This work was supported by the DGI grant (CTQ2013- 40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the EU ITN iSwitch 642196, the NANO2FUN Project No. 607721 and the Generalitat de Catalunya (grant 2014-SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). S.V. is thankful to the LabEx-Chemistry of Complex Systems for a post-doctoral grant (ANR-10-LABX-0026CSC) and to the regional High-Performance Computing (HPC) center in Strasbourg for computational resources. M.S. is enrolled in the Material Science Ph.D. program of UAB and is grateful to MEC for a FPU predoctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic stability against calcining of microwavesynthesized CoFe2O4 nanoparticles

  • Bartolomé, Elena
  • Cayado, Pablo
  • Ricart, Susagna
  • Gázquez, Jaume
  • Mundet, Bernat
  • Coll, Mariona
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Pellegrin, Eric
High quality CoFe2O4 nanoparticles were synthesized using a one-pot, microwave assisted method, that allows forming stable colloidal solutions in alcoholic solvents, as required for the preparation by Chemical Solution Deposition of hybrid nanocomposite ferromagnetic-high Tc YBa2Cu3O7 superconducting films or devices. We have investigated how the thermal process necessary for the preparation of such epitaxial nanocomposites, involving high temperatures (800 °C) and oxygen partial pressures (1 atm), affects the structure and magnetic properties of the isolated nanoparticles. The NPs were fully characterised by XRD, SQUID, STEM-EELS and XMCD at four different stages of the thermal process. Results show that, despite intermediate changes in the cation distribution occur during the process, the final NP magnetization is stable against the thermal treatment. This result opens up perspectives for the preparation of hybrid YBCO films with embedded magnetic NPs using low-cost chemical-solution methods, Authors acknowledge the MICIN (NANOSELECT, CSD2007-00041 and MAT2014-51778-C2-1-R and FEDER), Generalitat de Catalunya (2014SGR 753 and Xarmae), ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496), the CONSOLIDER Excellence Network (MAT2015-68994-REDC) and the EU (EU-FP7 NMP-LA-2012- 280432 EUROTAPES project). Electron microscopy performed at the Centro Nacional de Microscopı´a Electro´nica (UCM) was sponsored by the ERC Starting Investigator Award No. STEMOX#239739. J. G. and M. C. also acknowledge the Ramon y Cajal program (RYC-2012- 11709, RYC-2013-12448). The XMCD experiments were performed at the BOREAS beamline of the ALBA Synchrotron Light Facility with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superconducting YBa 2 Cu 3 O 7–δ Nanocomposites Using Preformed ZrO 2 Nanocrystals: Growth Mechanisms and Vortex Pinning Properties

  • Keukeleere, Katrien De
  • Cayado, Pablo
  • Vallés, Ferran
  • Palau, Anna
  • Coll, Mariona
  • Ricart, Susagna
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Driessche, Isabel Van
Keukeleere, Katrien De et al., Although high temperature superconductors are promising for power applications, the production of low-cost coated conductors with high current densities—at high magnetic fi elds—remains challenging. A superior superconducting YBa 2 Cu 3 O 7–δ nanocomposite is fabricated via chemical solution deposition (CSD) using preformed nanocrystals (NCs). Preformed, colloidally stable ZrO 2 NCs are added to the trifl uoroacetic acid based precursor solution and the NCs’ stability is confi rmed up to 50 mol% for at least 2.5 months. These NCs tend to disrupt the epitaxial growth of YBa 2 Cu 3 O 7–δ , unless a thin seed layer is applied. A 10 mol% ZrO 2 NC addition proved to be optimal, yielding a critical current density J C of 5 MA cm −2 at 77 K in self-fi eld. Importantly, this new approach results in a smaller magnetic fi eld decay of J C (H//c) for the nanocomposite compared to a pristine fi lm. Furthermore, microstructural analysis of the YBa 2 Cu 3 O 7–δ nanocomposite fi lms reveals that different strain generation mechanisms may occur compared to the spontaneous segregation approach. Yet, the generated nanostrain in the YBa 2 Cu 3 O 7–δ nanocomposite results in an improvement of the superconducting properties similar to the spontaneous segregation approach. This new approach, using preformed NCs in CSD coatings, can be of great potential for high magnetic fi eld applications., K.D.K. and P.C. contributed equally to this work. This work was fi nancially supported by a BOF research fund of Ghent University ( BOF11/ DOC/286 ), FWO Flanders ( F08512 ), and Eurotapes, a collaborative project funded by the European Community’s Seven Framework Program ( EU-FP7 NMP-LA-2012-280432 ). The authors also acknowledge MINECO and FEDER funds for MAT2014-51778-C2-1-R and the Center of Excellence award Severo Ochoa SEV-2015-0496 , and SGR753 from the Generalitat of Catalunya. M.C. acknowledges RyC Contract 2013–12448., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing localized strain in solution-derived YBa2Cu3O7−δ nanocomposite thin films

  • Guzmán, Roger
  • Gázquez, Jaume
  • Mundet, Bernat
  • Coll, Mariona
  • Obradors, Xavier
  • Puig Molina, Teresa
Enhanced pinning due to nanoscale strain is unique to the high-Tc cuprates, where pairing may be modified with lattice distortion. Therefore a comprehensive understanding of the defect landscape is required for a broad range of applications. However, determining the type and distribution of defects and their associated strain constitutes a critical task, and for this aim, real-space techniques for atomic resolution characterization are necessary. Here, we use scanning transmission electron microscopy (STEM) to study the atomic structure of individual defects of solution-derived YBa2Cu3O7 (YBCO) nanocomposites, where the inclusion of incoherent secondary phase nanoparticles within the YBCO matrix dramatically increases the density of Y1Ba2Cu4O8 (Y124) intergrowths, the commonest defect in YBCO thin films. The formation of the Y124 is found to trigger a concatenation of strain-derived interactions with other defects and the concomitant nucleation of intrinsic defects, which weave a web of randomly distributed nanostrained regions that profoundly transform the vortex-pinning landscape of the YBCO nanocomposite thin films., Authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), European Research Council Advanced Grant Award ERC-2014-ADG-669504, and from the Catalan Government with 2014-SGR-753 and Xarmae. J.G. and M.C. acknowledge Ramon y Cajal Program (RyC-2012- 11709 and RYC-2013-12448, respectively). The microscopy work were conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon - Universidad de Zaragoza (Zaragoza, Spain). Authors acknowledge the LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt(II)heteroarylalkenolate precursor for homogeneous Co3O4 coatings by atomic layer deposition

  • Büyükyazi, Mehtap
  • Fischer, Thomas
  • Penmgei, Yu
  • Coll, Mariona
  • Mathur, Sanjay
We present a new and efficient cobalt precursor, CoII(DMOCHCOCF3)2, to prepare Co3O4 thin films and conformal coatings. In the synthesis of this Co complex, heteroaryl moieties and CF3-groups were combined leading to high thermal stability and volatility precursor. The suitability of this precursor for ALD deposition was tested on flat silicon substrates and TiO2/C nanofibers upon process optimization. Deposition at 200ºC results in homogeneous and smooth Co3O4 thin films with a growth per cycle of 0.02 nm/cycle. Conformal coatings have been successfully obtained on TiO2/C nanofibers being thus an attractive platform for surface chemistry studies on high aspect ratio structures for future photocatalysts, sensors, supercapacitors and batteries., Authors would like to thank University of Cologne for the financial support within the postdoc-program „Network & Exchange-NetEx“. Furthermore, they are thankful to „Fonds der chemischen Industrie“ (FCI). M.C thanks Ramón y Cajal program RYC-2013-12448. We also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496), 2014-SGR-150 from the Generalitat de Catalunya, MAT2014-51778-C2-1-R and the Chinese Scholarship Council CSC fellowship (201606920073) to P.Y., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competition between Superconductor – Ferromagnetic stray magnetic fields in YBa2Cu3O7−x films pierced with Co nano-rods

  • Rouco, Víctor
  • Córdoba, Rosa
  • Teresa, José María de
  • Rodríguez, Luis A.
  • Navau, Carles
  • Del Valle, Nuria
  • Via, G.
  • Sánchez, A.
  • Monton, Carlos M.
  • Kronast, Florian
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Palau, Anna
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors., This work has been supported by Spanish MINECO and FEDER (MAT2014-51778-C2-1R, CSD2007-0041, MAT2014-51982-C2-1-R and MAT2015-69725-REDT, MAT2016-79426-P), Severo Ochoa SEV2015-0496 program, Generalitat de Catalunya (2014-SGR-00753, 2014-SGR-150, 2014-PROD00059), Aragon regional government projects, including FEDER funding, European Seventh Framework Program (FP7/2007-2013) under grant agreement 312284, EU-NMP-LA-2012-280432 EUROTAPES project and Cost Actions MP1201 and CM1301 (CELINA). A. Sanchez acknowledges a grant from ICREA Academia, funded by the Generalitat de Catalunya. We are grateful to I. Rivas and R. Valero from LMA-INA (Zaragoza, Spain) for experimental help in the cobalt growth and Ar+ milling processes, and Dr C. Magén and Dr. P. Algarabel from LMA-INA (Zaragoza, Spain) for facilitating the use of their high performance computing server to perform the micromagnetic simulations. We acknowledge R. Morales from UPV/EHU and Ikerbasque, A. Fernández-Pacheco from U. Cambridge and S. Valencia from Helmholtz-Zentrum, Berlin for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electric-Field-Adjustable Time-Dependent Magnetoelectric Response in Martensitic FeRh Alloy

  • Fina, Ignasi
  • Quintana, Alberto
  • Padilla-Pantoja, Jessica
  • Martí, Xavier
  • Macià, Ferran
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Fontcuberta, Josep
  • Sort, Jordi
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic−ferromagnetic phases in FeRh, unbalanced by voltagecontrolled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015- 73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, MAT2015-64110-C2-2-P, and associated FEDER], the Generalitat de Catalunya (2014-SGR-734, 2014-SGR-1015) and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from the EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. Jose Santiso and Jose Manuel Caicedo Roque from Institut Català de Nanociència i Nanotecnologia are acknowledged for valuable collaboration on time-dependent X-ray characterization. We also acknowledge Max Stengel and Umesh Bhaskar for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emerging Diluted Ferromagnetism in High- Tc Superconductors Driven by Point Defect Clusters

  • Gázquez, Jaume
  • Guzmán, Roger
  • Coll, Mariona
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
Gázquez, Jaume et al., Defects in ceramic materials are generally seen as detrimental to their functionality and applicability. Yet, in some complex oxides, defects present an opportunity to enhance some of their properties or even lead to the discovery of exciting physics, particularly in the presence of strong correlations. A paradigmatic case is the high-temperature superconductor YBa2Cu3O7-δ (Y123), in which nanoscale defects play an important role as they can immobilize quantized magnetic flux vortices. Here previously unforeseen point defects buried in Y123 thin films that lead to the formation of ferromagnetic clusters embedded within the superconductor are unveiled. Aberration-corrected scanning transmission microscopy has been used for exploring, on a single unit-cell level, the structure and chemistry resulting from these complex point defects, along with density functional theory calculations, for providing new insights about their nature including an unexpected defect-driven ferromagnetism, and X-ray magnetic circular dichroism for bearing evidence of Cu magnetic moments that align ferromagnetically even below the superconducting critical temperature to form a dilute system of magnetic clusters associated with the point defects., J.G. and R.M. contributed equally to this work. Authors acknowledge the MICIN (NANOSELECT, CSD2007-00041 and MAT2014-51778- C2-1-R), Generalitat de Catalunya (2014SGR 753 and Xarmae), and the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project and Cost Action MP1201). They also acknowledge MINECO for the Center of Excellence award Severo Ochoa (SEV-2015-0496). Work at ORNL was supported by the US DOE Offi ce of Basic Energy Sciences, Materials Sciences and Engineering Division (M.V., S.J.P.) and by the Scientifi c User Facilities Division. Some of the electron microscopy work had also been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza. Work at INA-LMA was supported by NanoAraCat. Research at UCM (J.S.) was supported by the ERC starting Investigator Award, grant no. 239739 STEMOX and Juan de la Cierva Program JCI-2011- 09428 (MICINN-Spain). The XMCD experiments were performed at the BOREAS beamline of the ALBA Synchrotron Light Facility with the collaboration of ALBA staff. M.V., E.P., and P.G. acknowledge funding by MINECO through programa Retos de la Sociedad ( FIS2013-45469- C4-3-R ). Research at Vanderbilt was supported by the U.S. DOE grant DE-FG02-09ER46554 and the McMinn Endowment. Computations were supported by the NERSC (U.S. DOE, DE-AC02-05CH11231). J.G. and M.C. also acknowledge the Ramon y Cajal program (RYC-2012-11709 and RYC-2013-12448, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Vortex dynamics in nanofabricated chemical solution deposition high-temperature superconducting films

  • Palau, Anna
  • Rouco, Víctor
  • Luccas, Roberto F.
  • Obradors, Xavier
  • Puig Molina, Teresa
Artificial manipulation and control of vortex dynamics in YBa2Cu3O7 (YBCO) films have always been a complex issue, especially since high thermal excitations but also strong vortex pinning capabilities coexist in this material. Thus, artificial nanofabrication strategies able to generate competing effects with intrinsic microstructural defects need to be achieved. Lithography tools are widely used to create model systems with controlled pinning potentials in superconductors. However, these techniques easily disturb the optimal oxygen film doping in YBCO films and consequently the overall performances degrades. We have optimized the use of two different high-resolution nanolithography approaches, Focused Ion Beam Milling and Electron Beam Lithography, to artificially and locally modify the pinning landscape of YBCO films grown by chemical solution deposition (CSD). Three different nanofabricated systems will be discussed, which resulted in ideal structures to manipulate vortex dynamics in CSD-YBCO thin films with strong intrinsic pinning centers. In particular, we observed artificial granularity effects, nanowall pinning, and positive and negative rectification effects. We will report on our understanding of all these effects and potential expectations., This work has been supported by MINECO (MAT2014-51778-C2- 1R, MAT2011-28874-C02-01, Programa CONSOLIDER, CSD 2007-00041), Generalitat de Catalunya (2014-SGR-00753), European Union, FP7- EU-NMP-LA-2012-280432 EUROTAPES project and Cost Action MP1201. ICMAB acknowledges the Severo Ochoa Center of Excellence mention from MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ABS 3D printed solutions for cryogenic applications

  • Bartolomé, Elena
  • Bozzo, Bernat
  • Sevilla, Pablo
  • Martínez Pasarell, Olga
  • Puig Molina, Teresa
  • Granados, Xavier
3D printing has become a common, inexpensive and rapid prototyping technique, enabling the ad hoc fabrication of complex shapes. In this paper, we demonstrate that 3D printed objects in ABS can be used at cryogenic temperatures, offering flexible solutions in different fields. Firstly, a thermo-mechanical characterization of ABS 3D printed specimens at 77 K is reported, which allowed us to delimit the type of cryogenic uses where 3D printed pieces may be implemented. Secondly, we present three different examples where ABS 3D printed objects working at low temperatures have provided specific solutions: (i) SQUID inserts for angular magnetometry (low temperature material characterization field); (ii) a cage support for a metamaterial “magnetic concentrator” (superconductivity application), and (iii) dedicated tools for cryopreservation in assisted reproductive techniques (medicine field)., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R). The authors would also like to thank J. Prat-Camps from UAB Electromagnetism Group for his participation in the design of the concentrator support. M. Turner is acknowledged for English checking of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Axiotaxy in oxide heterostructures: Preferential orientation of BaCeO3 nanoparticles embedded in superconducting YBa2Cu3O7 −δ thin films

  • Solano, Eduardo
  • Geenen, Filip
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Mocuta, Cristian
  • Detavernier, Christophe
Addressing and controlling texture in crystalline materials is an extremely important issue, since this can largely influence and finally control the materials properties, be it mechanical, electrical, magnetic, etc. In this work, we present an axiotaxial orientation of nanoparticles embedded in an epitaxial oxide heterostructure, signaling the importance of texture studies on nanocomposite thin films. Synchrotron X-ray diffraction studies revealed that embedded BaCeO3 (BCO) nanoparticles within the YBa2Cu3O7−δ (YBCO) superconductor prepared from chemical solutions presented an axiotaxial texture. Incorporated nanostructured defects such as BCO within a YBCO matrix are relevant for the fabrication of enhanced superconducting materials and devices. The YBCO presented the main out-of-plane epitaxial growth and two in-plane secondary orientations, which defined the three distinct axiotaxial axis of rotation of the BCO nanoparticles. In addition, some incorporated BCO grains showed an epitaxial growth orientation produced by a double-axiotaxy, i.e. the BCO nanoparticles exhibit a preferential orientation with respect to two distinct YBCO grains, limiting their rotational freedom. Texture studies like the ones shown here are thus a must to investigate and enhance the effect of the embedded grains on the final properties of the hybrid superconducting thin films., The research leading to these results has received funding from the FWO-Vlaanderen, BOF-UGent (GOA 01G01513) and Hercules foundation (AUGE/09/014). ICMAB also acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and COACHSUPENERGY project (MAT2014-51778-C2-1-R), from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and from the Catalan Government (2014-SGR-753). The authors gratefully acknowledge the Synchrotron SOLEIL for allocating the beamtime. Alba Garzón-Manjon, Josep Ros and Susagna Ricart are recognized for their assistance in preparing the CeO2 nanoparticles; Pablo Cayado and Mariona Coll for helping in growing the superconducting layer., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the Nucleation and Coarsening Mechanisms of Solution-Derived Self-Assembled Epitaxial Ce0.9Gd0.1O2–y Nanostructures

  • Queraltó, Albert
  • Mata, Maria de la
  • Arbiol, Jordi
  • Hühne, Ruben
  • Obradors, Xavier
  • Puig Molina, Teresa
Self-assembling approaches based on chemical solution deposition (CSD) are ideal methods for the cost-effective production of epitaxial nanostructures with high throughput. Therefore, an in-depth investigation of the nucleation and coarsening processes involved in the self-assembly of nanostructures is mandatory to achieve a good control over nanostructure shape, dimensions, and orientation. Heteroepitaxial Ce0.9Gd0.1O2-y (CGO) is an ideal model system to unveil the underlying nanostructure development mechanisms in addition to their promising properties for catalysis, gas sensors, and ionic conductivity. Rapid thermal annealing furnaces have been used to study separately the thermodynamic and kinetic nucleation and coarsening mechanisms of self-assembled CGO isotropic and anisotropic nanostructures based on strain-engineering and surface energies control. Different CGO nanoislands are obtained: isotropic (001)CGO nanodots are grown on (001)-oriented Y2O3:ZrO2 (YSZ) and LaAlO3 (LAO) substrates, whereas (011)LAO substrates promote the growth of elongated (011)CGO nanowires. HRTEM and RHEED analyses are used to study the early stages of nucleation, as well as the shape and interfacial structure of CGO nanostructures. A systematic study with the heating ramp, annealing temperature and time, and strain in combination with thermally activated theoretical models provides information on the nucleation behavior, nucleation barriers, and atomic diffusion coefficients along in-plane and out-of-plane island orientations. Highly anisotropic atomic diffusion constants have been shown to be at the origin of the high aspect ratios of some of the nanostructures. Overall, our study provides a general method for the evaluation of nucleation and coarsening of multiple CSD-derived oxide nanostructures and understanding the shape development by combining thermodynamic and kinetic approaches., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2013-0295 and SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, cofinanced by the European Regional Development Fund), and the projects MAT2011- 28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect CSD2007-00041, and from the Catalan Government with 2014-SGR-753, 2014-SGR-1638, and Xarmae. A.Q. and M.d.l.M. are also grateful to CSIC and European Social Fund program for JAE-Predoc fellowships (E-08-2012-1321248 and E-08-2013-1028356)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial superconducting GdBa2Cu3O7−δ/Gd2O3 nanocomposite thin films from advanced low-fluorine solutions

  • Cayado, Pablo
  • Mundet, Bernat
  • Vallés, Ferran
  • Coll, Mariona
  • Ricart, Susagna
  • Gázquez, Jaume
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
Cayado, Pablo et al., We have employed the CSD method to synthesize GdBCO and GdBCO–Gd2O3 nanocomposite 250–300 nm thin films. For this we have designed a new low-fluorine solution never used before in the synthesis of GdBCO thin films that allows us to reduce the HF release by 80% and increase the reproducibility of the pyrolysis process. The growth of these thin films required a new thermal process to be designed, which we refer to as 'flash-heating', where the heating rate is extremely fast (~600 °C min−1). The structure and the superconducting properties of the pristine GdBCO films are excellent, showing a (00 l) epitaxial orientation of the GdBCO grains and T c values that reach 92.8 K, which means an enhancement of more than 1 K with respect to standard YBCO films. The calculated J c inside the grains (${J}_{{\rm{c}}}^{{\rm{G}}}$) also presents remarkable values: ${J}_{{\rm{c}}}^{{\rm{G}}}$(5 K) ~ 40 MA cm−2 and ${J}_{{\rm{c}}}^{{\rm{G}}}$(77 K) ~ 3.3 MA cm−2. Finally, the GdBCO–Gd2O3 nanocomposites films, with a 20% mol of Gd2O3, exhibit superior superconducting properties and pinning performances with respect to GdBCO pristine films., This work was financially supported by Eurotapes, a collaborative project funded by the European Community's Seven Framework Program (EU-FP7 NMP-LA-2012-280432). We also acknowledge MINECO and FEDER funds for the COACHSUPENERGY project (MAT2014-51778-C2-1-R) and the Center of Excellence award Severo Ochoa SEV-2015-0496, and SGR753 from the Generalitat of Catalunya. B M acknowledges an FI fellowship from MINECO. M C and J G acknowledge the Ramon y Cajal programs (RYC-2013-12448 and RYC-2012-11709, respectively), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Untangling surface oxygen exchange effects in YBa2Cu3O6+x thin films by electrical conductivity relaxation

  • Cayado, Pablo
  • Sánchez Valdés, César Fidel
  • Stangl, Alexander
  • Coll, Mariona
  • Roura Grabulosa, Pere
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
The kinetics of oxygen incorporation (in-diffusion process) and excorporation (out-diffusion process), in YBa2Cu3O6+x (YBCO) epitaxial thin films prepared using the chemical solution deposition (CSD) methodology by the trifluoroacetate route, was investigated by electrical conductivity relaxation measurements. We show that the oxygenation kinetics of YBCO films is limited by the surface exchange process of oxygen molecules prior to bulk diffusion into the films. The analysis of the temperature and oxygen partial pressure influence on the oxygenation kinetics has drawn a consistent picture of the oxygen surface exchange process enabling us to define the most likely rate determining step. We have also established a strategy to accelerate the oxygenation kinetics at low temperatures based on the catalytic influence of Ag coatings thus allowing us to decrease the oxygenation temperature in the YBCO thin films., The authors acknowledge the MICIN (NANOSELECT, CSD2007- 00041 and MAT2014-51778-C2-1-R and C2-2-R), Generalitat de Catalunya (2014SGR 753 and Xarmae), the EU (EU-FP7 NMP-LA- 2012-280432 EUROTAPES project, Cost Action MP1201) and ERC ADG-2014-669504. M. C. is grateful to the MINECO for the ‘‘Ramon y Cajal’’ contract RYC-2013-12448. We also acknowledge the MINECO for the Center of Excellence award Severo Ochoa (SEV-2015-0496). C. F. Sa´nchez-Valde´s acknowledges the support received from CSIC under JAE-Predoctorals program. We also acknowledge useful discussions with Dr S. Ricart, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable Self-Assembly of YF3 Nanoparticles by Citrate-Mediated Ionic Bridges

  • Martínez Esaín, Jordi
  • Faraudo, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Ros, Josep
  • Ricart, Susagna
  • Yáñez, Ramón
Ligand-to-surface interactions are critical factors in surface and interface chemistry to control the mechanisms governing nanostructured colloidal suspensions. In particular, molecules containing carboxylate moieties (such as citrate anions) have been extensively investigated to stabilize metal, metal oxide, and metal fluoride nanoparticles. Using YF3 nanoparticles as a model system, we show here the self-assembly of citrate-stabilized nanostructures (supraparticles) with a size tunable by temperature. Results from several experimental techniques and molecular dynamics simulations show that the self-assembly of nanoparticles into supraparticles is due to ionic bridges between different nanoparticles. These interactions were caused by cations (e.g., ammonium) strongly adsorbed onto the nanoparticle surface that also interact strongly with nonbonded citrate anions, creating ionic bridges in solution between nanoparticles. Experimentally, we observe self-assembly of nanoparticles into supraparticles at 25 and 100 °C. Interestingly, at high temperatures (100 °C), this citrate-bridge self-assembly mechanism is more efficient, giving rise to larger supraparticles. At low temperatures (5 °C), this mechanism is not observed, and nanoparticles remain stable. Molecular dynamics simulations show that the free energy of a single citrate bridge between nanoparticles in solution is much larger than the thermal energy and in fact is much larger than typical adsorption free energies of ions on colloids. Summarizing our experiments and simulations, we identify as key aspects of the self-assembly mechanism the requirement of NPs with a surface able to adsorb anions and cations and the presence of multidentate ions in solution. This indicates that this new ion-mediated self-assembly mechanism is not specific of YF3 and citrate anions, as supported by preliminary experimental results in other systems., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund) and SUPERINKS project (RTC-2015-3640-3, cofinanced by the European Regional Development Fund). We also thank support from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and ULTRASUPERTAPE project (H2020 ERC-2014-ADG-669504) and from the Catalan Government with 2014-SGR-753 and Xarmae. The authors acknowledge the technical support of Servei de Microscòpia, NMR Service and Servei de Difracció de Raigs-X, all at the UAB, to the Soft Materials Service and Dr. Judit Oró (Microscope Service) at the ICMAB-CSIC, Dr. Guillaume Sauthier for his support in XPS analysis, and Dr. Eduardo Solano for his scientific discussions. J.M.E. acknowledges the PIF predoctoral fellowship from the Universitat Autònoma de Barcelona. J.F. thanks CESGA Supercomputing Center for technical support and the use of computational resources. We thank Justin J. Charette for help with English usage., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vortex Lattice Instabilities in YBa2Cu3O7-x Nanowires

  • Rouco, Víctor
  • Massarotti, Davide
  • Stornaiuolo, Daniela
  • Papari, Gian Paolo
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Tafuri, Francesco
  • Palau, Anna
High-resolution focused ion beam lithography has been used to fabricate YBa2Cu3O7-x (YBCO) wires with nanometric lateral dimensions. In the present work, we investigate Flux-flow instabilities in nanowires of different widths, showing sudden voltage switching jumps from the superconducting to the normal state. We present an extensive study on the temperature and field dependence of the switching characteristics which reveal that voltage jumps become less abrupt as the temperature increases, and disappear at the vortex-liquid state. On the contrary, the current distribution at the critical point becomes narrower at high temperatures. Sharp voltage switchings very close to the critical current density can be obtained by reducing the width of the nanowires, making them very appealing for practical applications., We acknowledge financial support fromthe SpanishMinistry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund). We also are grateful for support from the European Union for ULTRASUPERTAPE project (ERC-2014-ADG-669504), NANOCOHYBRI project (Cost Action CA 16218), and from the Catalan Government with SGR-2017 and Xarmae. We acknowledge the use of ICTS-CNM facilities and ICMAB scientific and technical services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inkjet printed multi-deposited YBCO on CGO/LMO/MgO/Y2O3/Al2O3/Hastelloy tape for 2G Coated Conductors

  • Vlad, Valentina Roxana
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Molodyk, Alexander
Vlad, Valentina Roxana et al., We present the preparation of a new architecture of coated conductor by Inkjet printing of low fluorine YBa2Cu3O7-x on top of SuperOx tape: CGO/LMO/IBAD-MgO/Y2O3/Al2O3/Hastelloy. A 5-layered multi-deposited, 475 nm thick YBCO film was structurally and magnetically characterized. A good texture was achieved using this combination of buffer layers, requiring only a 30 nm thin IBAD-MgO layer. The LF-YBCO CC reaches self-field critical current density values of JcGB~15.9 MA/cm2 (5 K), ~1.23 MA/cm2 (77 K) corresponding to an Ic(77K)=58.4 A/cm-width. Inkjet printing offers a flexible and cost effective method for YBCO deposition, allowing patterning of structures., This work was performed within the framework of the EUROTAPES project (FP7-NMP.2011.2.2-1 Grant no. 280432), funded by the EU. ICMAB research was financed by the Ministry of Economy and Competitiveness, and FEDER funds under projects MAT2011-28874-C02-01, MAT2014-51778-C2-1-R, ENE2014-56109-C3-3-R and Consolider Nanoselect CSD2007-00041, and by Generalitat de Catalunya (2009 SGR 770, 2015 SGR 753 and Xarmae). ICMAB acknowledges support from Severo Ochoa Program (MINECO, Grant SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi
  • Quintana, Alberto
  • Martí, Xavier
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Sort, Jordi
  • Fontcuberta, Josep
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R, MAT2015-64110-C2-2-R and MAT2017-86357-C3-1-R, and associated FEDER], the Generalitat de Catalunya (2017-SGR-1377, 2017-SGR-292), and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV- 2015-0496). I.F. acknowledges Ramon y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Faceted‐Charge Patchy LnF3 Nanocrystals with a Selective Solvent Interaction

  • Martínez Esaín, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Ros, Josep
  • Yáñez, Ramón
  • Faraudo, Jordi
  • Ricart, Susagna
A fast and single-step preparation of patchy LnF3 faceted-charge nanocrystals are described. These hexagonal faceted nanocrystals allow the spontaneous selective adsorption of cations or anions in the different faces, producing stable and well-defined patches of different charge. The mechanism for the formation of the patches and the properties of the obtained nanocrystals are characterized by a combination of experimental techniques and all-atomic molecular dynamics simulations. The spontaneous dual-charged surface, as well as, the luminescence effects that can be achieved doping host-LaF3 systems make these new nanocrystals interesting both from a fundamental point of view and for a wide range of applications., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496), CONSOLIDER Excellence Network (MAT2015‐68994‐REDC), COACHSUPENERGY project (MAT2014‐51778‐C2‐1‐R, co‐financed by the European Regional Development Fund) and MAT2015‐64442‐R grant. We also thank the support from the European Union for EUROTAPES project (FP7‐NMP‐Large‐2011‐280432) and from the Catalan Government with 2017‐SGR‐1519. The authors acknowledge the technical support of Servei de Microscòpia, NMR Service and Servei de Difracció de Raigs‐X, all at the UAB. Finally, J.M.E. acknowledges a PIF pre‐doctoral fellowship from the Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defect landscape and electrical properties in solution-derived LaNiO3 and NdNiO3 epitaxial thin films

  • Mundet, Bernat
  • Jareño Cerulla, Julia
  • Gázquez, Jaume
  • Varela, María
  • Obradors, Xavier
  • Puig Molina, Teresa
In this work we evaluate the defects and the associated distortions present in tensile and compressive-strained chemical solution deposition (CSD) derived NdNiO3 (NNO) and LaNiO3 (LNO) thin-films by means of aberration corrected Scanning Transmission Electron Microscopy (STEM). We elucidate a fundamental link between strain and the most common defect observed in Nickelate films, the Ruddlesden-Popper fault (RPF), which will ultimately impinge on the electrical properties of the films. Overall, the concentration of RPFs defects increases with the lattice mismatch. More specifically, LNO films are always metallic, although transitioning from compressive to tensile strain results in the appearance of RPFs and an increase of the resistivity. On the other hand, NNO films always behave as insulators under tensile strain, whereas under compressive strain the increase of the thickness makes the onset of the metal-to-insulator transition (MIT) to shift to higher temperatures., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R and BES-2015-072749 grant for B.M, co-financed by the European Regional Development Fund) and from the Catalan Government with 2017 SGR 1519 and Xarmae. J.J. acknowledges an FPU grant (FPU14/05960) from Ministerio español de Educación, Cultura y Deporte para la Formación de Profesorado Universitario and J.G. acknowledges the Ramon y Cajal program (RyC-2012–11709). The STEM microscopy work was conducted in the ICTS-CNME at UCM as well as at the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza. Authors acknowledge the ICTS-CNME for offering access to their instruments and expertise. Electron microscopy performed at the Centro Nacional de Microscopía Electrónica (UCM) were sponsored by the ERC Starting Investigator Award No. STEMOX#239739., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical Tuning of Metal Insulator Transition and Nonvolatile Resistive Switching in Superconducting Films

  • Palau, Anna
  • Fernández Rodríguez, Alejandro
  • Gonzalez Rosillo, Juan Carlos
  • Granados, Xavier
  • Coll, Mariona
  • Bozzo, Bernat
  • Ortega Hernandez, Rafael
  • Suñé, Jordi
  • Mestres, Narcís
  • Obradors, Xavier
  • Puig Molina, Teresa
Modulation of carrier concentration in strongly correlated oxides offers the unique opportunity to induce different phases in the same material, which dramatically change their physical properties, providing novel concepts in oxide electronic devices with engineered functionalities. This work reports on the electric manipulation of the superconducting to insulator phase transition in YBa2Cu3O7−δ thin films by electrochemical oxygen doping. Both normal state resistance and the superconducting critical temperature can be reversibly manipulated in confined active volumes of the film by gate-tunable oxygen diffusion. Vertical and lateral oxygen mobility may be finely modulated, at the micro- and nano-scale, by tuning the applied bias voltage and operating temperature thus providing the basis for the design of homogeneous and flexible transistor-like devices with loss-less superconducting drain–source channels. We analyze the experimental results in light of a theoretical model, which incorporates thermally activated and electrically driven volume oxygen diffusion., We acknowledge the financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R), co-financed by the European Regional Development Fund. We also thank the support from the European Union for NanoSC Cost Action (MP1201), NANOCOHYBRI (CA 16218) and ERC-2014-ADG-669504, and from the Catalan Government with 2014-SGR-753 and Xarmae. A.F.-R. and J.C.G.-R. thank Spanish Ministry of Economy for his FPI Spanish grants (BES-2016-077310, BES-2012-053814)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial YBa2Cu3O7−x nanocomposite films and coated conductors from BaMO3 (M = Zr, Hf) colloidal solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Li, Ziliang
  • Pop, Cornelia
  • Mundet, Bernat
  • Chamorro, Natalia
  • Vallés, Ferran
  • Coll, Mariona
  • Ricart, Susagna
  • Villarejo, Bohores
  • Pino, Flavio
  • Palau, Anna
  • Gázquez, Jaume
  • Ros, Josep
  • Usoskin, Alexander
Superconducting nanocomposites are the best material choice to address the performance required in power applications and magnets working under high magnetic fields. However, it is still challenging to sort out how to achieve the highest superconducting performance using attractive and competitive manufacturing processes. Colloidal solutions have been recently developed as a novel and very promising low cost route to manufacture nanocomposite coated conductors. Well dispersed and stabilized preformance nanoparticle solutions are first prepared with high concentrations and then mixed with the YBa2Cu3O7 metalorganic precursor solutions to generate colloidal solutions to grow the nanocomposite films. Here we demonstrate, for the first time, that non-reactive BaZrO3 and BaHfO3 perovskite preformed nanoparticles are suitable for growing high quality thin and thick films, and coated conductors with a homogeneous distribution and controlled particle size using this fabrication method. Additionally, we extend the nanoparticle content of the nanocomposites up to 20%–25% mol without any degradation of the superconducting properties. Thick nanocomposite films, up to 0.8 μm, have been prepared with a single deposition of low-fluorine solutions using an ink jet printing dispenser and we demonstrate that the preformed nanoparticles display only a very limited coarsening during the growth process and so high critical current densities J c (B) under high magnetic fields. These films show the highest critical currents achieved so far based on the colloidal solution approach, I c = 220 A/cm-w at 77 K and self-field, and they still have a high potential for further increase in the film thickness. Finally, we also show that nanocomposite YBa2Cu3O7–BaZrO3 coated conductors based on an alternating beam assisted deposited YSZ buffer layer on stainless steel metallic substrates can be developed based on these novel colloidal solutions. Non-reactive preformed oxide perovskite nanoparticles are therefore very promising elements to further advance the colloidal solution approach in the implementation of low cost and high performance coated conductors for high magnetic field applications., All authors acknowledge the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project), MINECO (COACHSUPENERGY, MAT2014-51778-C2-1-R and SUPERINKS, RTC-2015-3640-3) and Generalitat de Catalunya (2014SGR 753 and Xarmae). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. TEM microscopy work was conducted in the Catalan Institute of Nanoscience and Nanotechnology (ICN2). Authors acknowledge the ICN2 Electron Microscopy Division for offering access to their instruments and expertise. Part of the STEM microscopy work was conducted in 'Laboratorio de Microscopias Avanzadas' at the Instituto de Nanociencia de Aragon-Universidad de Zaragoza. Authors acknowledge the LMA-INA for offering access to their instruments and expertise. JG and MC also acknowledge the Ramon y Cajal program (RYC-2012-11709 and RYC-2013-12448, respectively). ZL and BM acknowledge the China Scholarship Council (CSC) and F I MINECO for fellowships, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diminish electrostatic in piezoresponse force microscopy through longer or ultra-stiff tips

  • Gómez Rodríguez, Andrés
  • Puig Molina, Teresa
  • Obradors, Xavier
Piezoresponse Force Microscopy is a powerful but delicate nanoscale technique that measures the electromechanical response resulting from the application of a highly localized electric field. Though mechanical response is normally due to piezoelectricity, other physical phenomena, especially electrostatic interaction, can contribute to the signal read. We address this problematic through the use of longer ultra-stiff probes providing state of the art sensitivity, with the lowest electrostatic interaction and avoiding working in high frequency regime. In order to find this solution we develop a theoretical description addressing the effects of electrostatic contributions in the total cantilever vibration and its quantification for different setups. The theory is subsequently tested in a Periodically Poled Lithium Niobate (PPLN) crystal, a sample with well-defined 0° and 180° domains, using different commercial available conductive tips. We employ the theoretical description to compare the electrostatic contribution effects into the total phase recorded. Through experimental data our description is corroborated for each of the tested commercially available probes. We propose that a larger probe length can be a solution to avoid electrostatic forces, so the cantilever-sample electrostatic interaction is reduced. Our proposed solution has great implications into avoiding artifacts while studying soft biological samples, multiferroic oxides, and thin film ferroelectric materials., This research was supported by Consolider NANOSELECT (CSD 2007-00041). Supported by the Spanish Ministry of Economy and Competitiveness (MINECO, MAT2014-51778-C2-1-R project, co-financed with FEDER). ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). The authors thank ICMAB Scientific and Technical Services. M.C acknowledges RyC contract 2013-12448., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the Synthesis of LnF3 (Ln = La–Lu and Y) Nanocrystals via Mechanistic Study of the Coprecipitation Method

  • Martínez Esaín, Jordi
  • Ros, Josep
  • Faraudo, Jordi
  • Ricart, Susagna
  • Yáñez, Ramón
Here, 15 LnF3 nanocrystals are synthesized using coprecipitation method with citrate stabilization to allow the fast, easy, and reproducible synthesis of several nanoscaled structures in water. General trends related to the behavior of LnF3 nanocrystals are highlighted due to their broad range of application in several fields (e.g., medical applications). The same nature for all Ln3+ cations is expected due to the internal role of f orbitals. However, we found that the use of different lanthanide elements is crucial in the final size, shape, assembly, and crystalline structure. In addition, the decrease of the cation size of the lanthanide series changes the behavior of these compounds, resulting in hexagonal, orthorhombic, and cubic crystalline structures. In addition, we are able to tune the cubic crystalline phase to pure orthorhombic by modifying the pH of the system using HBF4 instead of tetramethylammonium citrate. Via 11B NMR, we demonstrated the mechanism of HBF4 as fluorinating agent if an additional source of F– is not added during the synthesis. 1H NMR and IR techniques were performed to unravel the picture of the surface chemistry of the two representative metal cations (Y and La). Finally, HRTEM and SAED were performed to uncover the shape of the obtained nanocrystals and the preferential orientation of the assembled particles, giving crucial information on the involved mechanisms. This study reveals not only the dependence of the crystalline structure on the used metal and pH but also ability to achieve LnF3 assembled particles depending on the final shape and temperature., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, cofinanced by the European Regional Development Fund), and SUPERINKS project (RTC-2015-3640-3, cofinanced by the European Regional Development Fund). We also acknowledge the support from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and from the Catalan Government with 2014-SGR-753 and Xarmae. The authors acknowledge the technical support of Servei de Microscòpia, NMR Service, and Servei de Difracció de Raigs-X, all at the UAB. Also, the support of Dr. Judit Oró from Microscopy Service and Dr. Anna Crespi from X-ray Diffraction Service at the ICMAB-CSIC is acknowledged. Finally, J.M.E. acknowledges the PIF predoctoral fellowship from the Universitat Autònoma de Barcelona. We thank Justin J. Charette for help with English usage., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth of all-chemical high critical current YBa2Cu3O7−δ thick films and coated conductors

  • Pop, Cornelia
  • Villarejo, Bohores
  • Pino, Flavio
  • Mundet, Bernat
  • Ricart, Susagna
  • Palau, M. de
  • Puig Molina, Teresa
  • Obradors, Xavier
The achievement of high critical currents in 'all-chemical' YBa2Cu3O7−δ thick films from low cost and versatile chemical solution deposition (CSD) methodology is still an open issue. Here we report a study of the nucleation and growth conditions to achieve YBa2Cu3O7−δ films in excess of 1 micron using single pass inkjet printing or multideposition of low-fluorine metalorganic precursors. Growth conditions of thick YBa2Cu3O7−δ layers are first investigated on LaAlO3, where there is no interfacial chemical reactivity. The second architecture investigated is an 'all-chemical' CSDCe0.9Zr0.1O2(CZO)/YSZ multilayer on single crystal substrates which serves as model system for coated conductors. Finally, the 'all-chemical' coated conductor architecture CSDYBa2Cu3O7/CSDCZO/ABADYSZ/stainless steel, where ABAD stands for alternating beam assisted deposition, is investigated. The nucleation conditions of YBa2Cu3O7−δ films on top of CΖΟ cap layers have been selected to minimize the formation of the BaCeO3 phase at the interface. We demonstrate that by combining the use of Ag additives in the starting YBCO solution and processing conditions leading to low supersaturation (high water pressure and low temperature) we can achieve ~1 μm thick YBa2Cu3O7−δ films and coated conductors with high critical currents of ${{I}_{c}}^{sf}$ = 390 and 100 A/cm-w, respectively, at 77 K and self-field. The achieved control of the interfacial reactivity with CeO2 cap layers opens a route for further increasing film thickness and critical currents in 'all-chemical' YBa2Cu3O7−δ coated conductors., All authors acknowledge the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project and H2020-NMBP-18-2016-IA-72109 FASTGRID project), COST CA16218 NANOCOHYBRY, MINECO (COACHSUPENERGY, MAT2014-51778-C2-1-R and SUPERINKS) and Generalitat de Catalunya (2017SGR 1519 and Xarmae). ICMAB acknowledges the Center of Excellence award Severo Ochoa SEV-2015-0496. Special thanks are given to Bruker HTS Company from Germany for providing the ABADYSZ/SS metallic substrates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band gap tuning of solution processed ferroelectric perovskite BiFe1-xCoxO3 thin films

  • Machado, Pamela
  • Scigaj, Mateusz
  • Gázquez, Jaume
  • Rueda, Estel
  • Sánchez Díaz, Antonio
  • Fina, Ignasi
  • Gibert Roca, Martí
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Campoy Quiles, Mariano
  • Coll, Mariona
Ferroelectric perovskite oxides are emerging as a promising photoactive layer for photovoltaic applications due to their very high stability and their alternative ferroelectricity-related mechanism for solar energy conversion that could lead to extraordi-narily high efficiencies. One of the biggest challenges so far is to reduce their band gap towards the visible while simultane-ously retaining ferroelectricity. To address these two issues, herein it is performed an elemental composition engineering of BiFeO3 by substituting Fe by Co cations, as means to tune the characteristics of the transition metal-oxygen bond. We demonstrate by solution processing the formation of epitaxial, pure phase and stable BiFe1-xCoxO3 thin films for x=0.3 and film thickness up to 100 nm. Importantly, the band gap can be tuned from 2.7 eV to 2.3 eV upon cobalt substitution while simultaneously enhancing ferroelectricity. As a proof of concept, non-optimized vertical devices have been fabricated and, reassuringly, the electrical photoresponse in the visible of the Co-substituted phase is improved with respect to the unsubsti-tuted oxide., We would like to acknowledge Prof. Josep Fontcuberta for fruitful discussions and comments on this study and for providing access to his experimental facilities. This research was supported by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D SEV-2015-0496 and FIPNANOSOLE- 2016, MAT2017-83169-R, MAT2014-51778-C2- 1-R, MAT2015-70850-P, MAT2017-85232-R (AEI/FEDER, EU)), the Generalitat de Catalunya (2017-SGR-1519, 2017 SGR- 1377), the European Research Council-ERC (FOREMAT under grant agreement no. 648901) and “L’Oreal UNESCO For Women in Science”. M.C., J.G. and I.F. acknowledge RyC contracts (2013-12448, 2012-11709 and RYC-2017-22531). I.F. is grateful to MINECO for MAT2015-73839-JIN project. The HRTEM microscopy work was conducted at the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory, which is a DOE Office of Science User Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electromigration in the dissipative state of high-temperature superconducting bridges

  • Baumans, Xavier D.A.
  • Fernández Rodríguez, Alejandro
  • Mestres, Narcís
  • Collienne, Simon
  • Van de Vondel, Joris
  • Palau, Anna
  • Silhanek, Alejandro V.
The current stimulated atomic diffusion in YBa2Cu3O7–d superconducting bridges is investigated. A superconductor to insulator transition can be induced by the current controlled electromigration process, whereas the partial recovery of the superconducting state can be achieved by inverting the polarity of the bias. Interestingly, the temperature dependence of the current density JEM(T), above which atomic migration takes place, intersects the critical current density Jc(T) at certain temperature T*. Therefore, for T < T*, the current-induced dissipative state cannot be accessed without leading to irreversible modifications of the material properties. This phenomenon could also lead to the local deterioration of high critical temperature superconducting films abruptly penetrated by thermomagnetic instabilities., The authors acknowledge the - nancial support form the Fonds de la Recherche Sci- enti que - FNRS, Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994- REDC), COACHSUPENERGY project (MAT2014- 51778-C2-1-R), co- nanced by the European Regional Development Fund, the Research Foundation - Flanders (FWO-Vlaanderen), the COST programme NanoCoHy- bri (CA 16218), and from the Catalan Government with 2017 SGR 1519. A.F.-R. thank Spanish Ministry of Econ- omy for his FPI Spanish grant (BES-2016-077310)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Singular spectrum analysis filtering and Fourier inversion: an efficient and fast way to improve resolution and quality of current density maps with low-cost Hall scanning systems

  • Amorós, Jaume
  • Duran, Arnau
  • Carrera, Miquel
  • López, Josep
  • Granados, Xavier
We provide a Biot–Savart inversion scheme that, for any two-dimensional, or bulk with planar crystallization, high-temperature superconducting (HTS) sample, determines current density maps with a higher resolution and accuracy than previous procedures and at a fraction of its computational cost. The starting point of our scheme is a Hall scanning microscopy map of the out-of-plane component of the magnetic field generated by the current. Such maps are noisy in scans of real samples with commercial-grade equipment, and their error is the limiting factor in any Biot–Savart inversion scheme. The main innovation of our proposed scheme is a singular spectrum analysis (SSA) filtering of the Hall probe maps, which cancels measurement errors such as noise or drifts without introducing any artifacts in the field map. The SSA filtering of the Hall probe data is so successful in this task that the resulting magnetic field map does not require an overdetermined QR inversion, allowing Fourier inversion of the Biot–Savart problem. Our implementation of SSA filtering of the Hall scan measurements, followed by Biot–Savart inversion using the fast Fourier transform (FFT), is applied to both simulations and real samples of HTS tape stacks. The algorithm works in cases where ill conditioning ruled out the application of Fourier inversion, and achieves a finer resolution for a fraction of the cost of the QR inversion used to date. The computation passes physical and statistical validity tests in all cases, and in three-dimensional samples it is shown to yield the average, with a depth-dependent weight, of the current density circulating in the different layers of the sample., We acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by FEDER), GAP project (MTM2015-69135-P) and SUPERINKS project (RTC-2015-3640-3, co-financed by FEDER); the European Union for the FASTGRID project (H2020-NMBP-18-2016-IA-72109) and WPMAG 5 (H2020-EUROfusion); and the Catalan Government with 2017-SGR-932, 2014-SGR-753 and Xarmae., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Accelerated growth by flash heating of high critical current Trifluoroacetate solution derived epitaxial superconducting YBa2Cu3O7 films

  • Li, Ziliang
  • Coll, Mariona
  • Mundet, Bernat
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
Trifluoroacetate solution derived epitaxial YBa2Cu3O7 films growth is a high throughput cost-effective approach to high critical current superconducting materials for power applications. Nonetheless, controlling the kinetic transformation of a multiphasic (Ba1-xYxF2+x, CuO) polycrystalline state to an epitaxial film requires preserving at the nanoscale the initial molecular homogeneity of the solutions. Here we present a flash heating approach (~ 30 times faster than conventional thermal annealing) to epitaxial films. We investigate through X-ray diffraction and TEM images the compositional and microstructural evolution at the nanoscale and we disclose how the nucleation rate is enhanced (3-5 times faster than conventional thermal annealing). We conclude that minimizing coarsening of the intermediate nanocrystalline phases has a very positive role in accelerating the total required growth process, as well as in decreasing the growth temperature to achieve a high quality epitaxy and microstructure. An additional advantage of the flash heating process is an increase of the density of nanometric defects (intergrowths), having a positive contribution to enhance vortex pinning efficiency and increasing the high magnetic field critical current density. Overall, implementing the flash heating process to grow YBa2Cu3O7 films appears as a very promising opportunity to reduce the cost / performance ratio of high temperature superconducting materials because it reduces the growth time and it enhances their performance., Authors acknowledge the EUROTAPES project (EU-FP7 NMP-LA-2012-280432), COACHSUPENERGY (MAT2014-51778-C2-1-R from MINECO (co-financed by the European Regional Development Fund), 2017-SGR 753 from Generalitat de Catalunya, and COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors acknowledge the Scientific Services at ICMAB, ICN2 Electron Microscopy Division. Z.L. acknowledges the China Scholarship Council (CSC)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of nanostructure and pinning properties in solution deposited YBa2Cu3O7−x nanocomposites with preformed perovskite nanoparticles

  • Li, Ziliang
  • Coll, Mariona
  • Mundet, Bernat
  • Chamorro, Natalia
  • Vallés, Ferran
  • Palau, Anna
  • Gázquez, Jaume
  • Ricart, Susagna
  • Puig Molina, Teresa
  • Obradors, Xavier
Solution deposited YBa2Cu3O7−x (YBCO) nanocomposites with preformed nanoparticles represent a promising cost-effective approach for superior critical current properties under applied magnetic fields. Nonetheless, the majority of YBCO nanocomposites with high nanoparticle loads (>20%) suffer from nanoparticle coalescence and degraded superconducting properties. Here, we study the influence of nanoparticle concentration (0–25% mol), size (5 nm–10 nm) and composition (BaHfO3, BaZrO3) on the generation of structural defects in the epitaxial YBCO matrix, key parameter for vortex pinning. We demonstrate that flash-heated superconducting nanocomposites with 20 mol% preformed BaHfO3 or BaZrO3 perovskite secondary phases feature discrete and small (7 nm) nanoparticles and high density of YBa2Cu4O8 (Y248) intergrowths. We identify a synergy between Y248 intergrowth density and small nanoparticles to increase artificial vortex pinning centers. Also, we validate the multideposition process to successfully increase film thickness of epitaxial nanocomposites with competitive critical currents Ic at 77 K., All authors acknowledge the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project), MINECO (COACHSUPENERGY, MAT2014-51778-C2-1-R) and Generalitat de Catalunya (2017SGR1519 and Xarmae). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors acknowledge the Scientific Services at ICMAB, the ICN2 Electron Microscopy Division and LMA-INA for offering access to their instruments and expertise. J.G. and M.C. also acknowledge the Ramon y Cajal program (RYC-2012-11709 and RYC-2013-12448 respectively). Z.L. acknowledges the China Scholarship Council (CSC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Depairing Current at High Magnetic Fields in Vortex-Free HighTemperature Superconducting Nanowires

  • Rouco, Víctor
  • Navau, Carles
  • Del Valle, Nuria
  • Massarotti, Davide
  • Papari, Gian Paolo
  • Stornaiuolo, Daniela
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Tafuri, Francesco
  • Sánchez, Àlvar
  • Palau, Anna
Superconductors are essential in many present and future technologies, from large-scale devices for medical imaging, accelerators, or fusion experiments to ultra-low-power superconducting electronics. However, their potential applicability, and particularly that of high-temperature superconductors (HTS), is severely affected by limited performances at large magnetic fields and high temperatures, where their use is most needed. One of the main reasons for these limitations is the presence of quantized vortices, whose movements result in losses, internal noise, and reduced performances. The conventional strategy to overcome the flow of vortices is to pin them along artificial defects. Here, we theoretically and experimentally demonstrate that critical-current density in high-temperature superconductors can reach unprecedented high values at high fields and temperatures by preventing vortex entry. By tailoring the geometry, that is, reducing the width, W, of nanowire-patterned HTS films, the range of the Meissner state, for which no vortices are present, is extended up to very large applied field values, on the order of ∼1 T. Current densities on the order of the depairing current can be sustained under high fields for a wide range of temperatures. Results may be relevant both for devising new conductors carrying depairing-current values at high temperatures and large magnetic fields and for reducing flux noise in sensors and quantum systems., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence (SEV-2015-0496), COACHSUPENERGY project (MAT2014-51778-C2-1-R), and SuMaTe (RTI2018-095853-B-C21) cofinanced by the European Regional Development Fund, and project MAT2016-79426-P (Agencia Estatal de Investigacion/Fondo ́ Europeo de Desarrollo Regional). We also thank support from the European Union for NANOCOHYBRI project (Cost Action CA 16218) and from the Catalan Government projects SGR-2017-1519 and 2017-SGR-105. A.S. acknowledges a grant from ICREA Academia, funded by the Generalitat de Catalunya. V.R. Acknowledges EU H2020 research and innovation programme (Marie Sklodowska-Curie IF grant agreement OXWALD 838693). We acknowledge the use of ICTS-CNM facilities and ICMAB scientific and technical services. We thank Alexey V. Pan for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous cationic ordering in chemicalsolution- grown La2CoMnO6 double perovskite thin films

  • Wang, Hailin
  • Gázquez, Jaume
  • Frontera, Carlos
  • Chisholm, Matthew F.
  • Pomar, Alberto
  • Martínez Perea, Benjamín
  • Mestres, Narcís
Double perovskite oxides are of interest because of their electric, magnetic, and elastic properties; however, these properties are strongly dependent on the ordered arrangement of cations in the double perovskite structure. Therefore, many efforts have been made to improve the level of cationic ordering to obtain optimal properties while suppressing antisite defect formation. Here, epitaxial double perovskite La2CoMnO6 thin films were grown on top of (001)-STO oriented substrates by a polymer-assisted deposition chemical solution approach. Confirmation of the achievement of full Co/Mn cationic ordering was found by scanning transmission electron microscopy (STEM) measurements; EELS maps indicated the ordered occupancy of B–B′ sites by Co/Mn cations. As a result, optimal magnetic properties (Msat ≈ 6 µB/f.u. and Tc ≈ 230 K) are obtained. We show that the slow growth rates that occur close to thermodynamic equilibrium conditions in chemical solution methods represent an advantageous alternative to physical deposition methods for the preparation of oxide thin films in which complex cationic ordering is involved., We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), COACHSUPENERGY project (MAT2014-51778-C2-1-R) and MAT2015-71664-R, cofinanced by the European Regional Development Fund. Support from the European Union′s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 645658 (DAFNEOX Project) is also acknowledged. H.W. acknowledges financial support from the China Scholarship Council (CSC). J.G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The STEM–EELS analysis was sponsored by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. The authors would like to thank Anna Crespi and Francesc Xavier Campos for assistance with the 3D reciprocal space tomography and reciprocal space map measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards Oxide Electronics: a Roadmap

  • Coll, Mariona
  • Fontcuberta, Josep
  • Althammer, M.
  • Bibes, Manuel
  • Boschker, H.
  • Calleja Lázaro, Alberto
  • Cheng, G.
  • Cuoco, M.
  • Dittmann, Regina
  • Dkhil, B.
  • El Baggari, I.
  • Fanciulli, M.
  • Fina, Ignasi
  • Fortunato, E.
  • Frontera, Carlos
  • Fujita, S.
  • García, V.
  • Goennenwein, S.T.B.
  • Granqvist, C.-G.
  • Grollier, J.
  • Gross, R.
  • Hagfeldt, A.
  • Herranz, Gervasi
  • Hono, K.
  • Houwman, E.
  • Huijben, M.
  • Kalaboukhov, A.
  • Keeble, D.J.
  • Koster, G.
  • Kourkoutis, L.F.
  • Levy, J.
  • Lira-Cantú, Mónica
  • MacManus-Driscoll, J.L.
  • Mannhart, Jochen
  • Martins, R.
  • Menzel, S.
  • Mikolajick, T.
  • Napari, M.
  • Nguyen, M.D.
  • Niklasson, G.
  • Paillard, C.
  • Panigrahi, S.
  • Rijnders, G.
  • Sánchez Barrera, Florencio
  • Sanchis, P.
  • Sanna, S.
  • Schlom, Darrell G.
  • Schroeder, U.
  • Shen, K.M.
  • Siemon, A.
  • Spreitzer, M.
  • Sukegawa, H.
  • Tamayo, R. R.
  • Brink, J. van den
  • Pryds, N.
  • Miletto Granozio, F.
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing the lattice anharmonicity of superconducting YBa2Cu3O7−δ via phonon harmonics

  • Ramos Alvarez, Alberto
  • Fleischmann, Nina
  • Vidas, Luciana
  • Fernández Rodríguez, Alejandro
  • Palau, Anna
  • Wall, Simon
We examine coherent phonons in a strongly driven sample of optimally-doped high temperature superconductor YBa2Cu3O7−δ . We observe a nonlinear lattice response of the 4.5 THz copper-oxygen vibrational mode at high excitation densities, evidenced by the observation of the phonon third harmonic and indicating the mode is strongly anharmonic. In addition, we observe how high-amplitude phonon vibrations modify the position of the electronic charge transfer resonance. Both of these results have important implications for possible phonon-driven nonequilibrium superconductivity, This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement No. 758461 and was supported by Spanish MINECO (Severo Ochoa Grants No. SEV-2015-0522 and No. SEV-2015-0496), Ramón y Cajal programme RYC2013-14838, and Fondo Europeo de Desarrollo Regional FIS2015-67898-P (MINECO/FEDER), MAT2014-51778- C2-1-R as well as Fundació Privada Cellex, and CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic anisotropy versus effective pinning anisotropy in YBa2Cu3O7 thin films and nanocomposites

  • Bartolomé, Elena
  • Vallés, Ferran
  • Palau, Anna
  • Rouco, Víctor
  • Pompeo, N.
  • Balakirev, F.F.
  • Maiorov, Boris
  • Civale, Leonardo
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Silva, E.
The intrinsic and effective anisotropies, both in the liquid and solid vortex regimes, of YB a 2 C u 3 O 7 (YBCO) pristine and nanocomposite thin films have been investigated. Angular resistivity measurements under varying fields and temperatures were performed to characterize the intrinsic vs effective anisotropy of samples in the regime of long-range vortex displacements. The effective anisotropy γ eff was determined from the scaling of the irreversibility line, applying the Blatter approach developed for uniaxial anisotropic superconductors. Resistive measurements in flux flow were utilized, in addition to H c 2 measurements in ultrahigh-fields, to determine the intrinsic anisotropy mass γ, enabling the study of a large number of samples with varied nanoparticle compositions. In order to access the intrinsic anisotropy in the vortex solid phase, complex impedance measurements at high microwave frequencies were performed, allowing us to access the flux-flow intrinsic anisotropy in the regime of very short vortex oscillations within the pinning potential wells. Results show that while the effective anisotropy γ eff decays as the nanoparticles-induced nanostrain in the YBCO films increases, the intrinsic anisotropy γ (determined both in dc and at microwave frequency) remains unaltered., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-Terminal Transistor-Like Devices Based on Strongly Correlated Metallic Oxides for Neuromorphic Applications

  • Fernández Rodríguez, Alejandro
  • Alcalà, Jordi
  • Suñé, Jordi
  • Mestres, Narcís
  • Palau, Anna
Memristive devices are attracting a great attention for memory, logic, neural networks, and sensing applications due to their simple structure, high density integration, low-power consumption, and fast operation. In particular, multi-terminal structures controlled by active gates, able to process and manipulate information in parallel, would certainly provide novel concepts for neuromorphic systems. In this way, transistor-based synaptic devices may be designed, where the synaptic weight in the postsynaptic membrane is encoded in a source-drain channel and modified by presynaptic terminals (gates). In this work, we show the potential of reversible field-induced metal-insulator transition (MIT) in strongly correlated metallic oxides for the design of robust and flexible multi-terminal memristive transistor-like devices. We have studied different structures patterned on YBa2Cu3O7−δ films, which are able to display gate modulable non-volatile volume MIT, driven by field-induced oxygen diffusion within the system. The key advantage of these materials is the possibility to homogeneously tune the oxygen diffusion not only in a confined filament or interface, as observed in widely explored binary and complex oxides, but also in the whole material volume. Another important advantage of correlated oxides with respect to devices based on conducting filaments is the significant reduction of cycle-to-cycle and device-to-device variations. In this work, we show several device configurations in which the lateral conduction between a drain-source channel (synaptic weight) is effectively controlled by active gate-tunable volume resistance changes, thus providing the basis for the design of robust and flexible transistor-based artificial synapses., This research was founded by the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), SUPERSWITCH project (FUNMAT-FIP-2017), COACHSUPENERGY (MAT2014-51778-C2-1-R), and SuMaTe (RTI2018-095853-B-C21) projects, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE. We also thank support from the European Union for NanoSC Cost Action NANOCOHYBRI (CA 16218) and from the Catalan Government with 2017-SGR-1519. A.F.-R thanks the Spanish Ministry of Economy for the FPI Spanish grant (BES-2016-077310). J.S. was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades and the ECSEL EU Joint Undertaking through the WAKeMeUP 783176 Project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast transient liquid assisted growth of high current density superconducting films

  • Soler, Laia
  • Jareño Cerulla, Julia
  • Banchewski, Juri
  • Rasi, Silvia
  • Chamorro, Natalia
  • Guzmán, Roger
  • Yáñez, Ramón
  • Mocuta, Cristian
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Obradors, Xavier
  • Puig Molina, Teresa
The achievement of high growth rates in YBa2Cu3O7 epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s−1) and high critical current densities (5 MA cm−2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process., Authors acknowledge EU for ULTRASUPERTAPE ERC-2014-ADG-669504; COACHSUPENERGY MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R from MINECO; SuMaTe RTI2018-095853-B-C21 and RTI2018-095853-B-C22 from MICINN and co-financing by the European Regional Development Fund; 2017-SGR 1519 from Generalitat de Catalunya; and EU COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors thank Dr. Cornelia Pop, Dr. Bohores Villarejo, Dr. Bernat Mundet, and Dr Anna Palau for contributions at the initial stages of the project. We thank Diana García, Lavinia Saltarelli, Adria Pacheco, Dr. Max Sieger, and Dr. Albert Queralto for help in the feasibility study and preliminary results on thick films and coated conductors. Authors acknowledge support from SuNAM Co Ltd. for providing the buffered metallic substrates for the initial tests on coated conductors. We also acknowledge the Scientific Services at ICMAB, ICTS of IMB-CNM-CSIC, ICN2 Electron Microscopy Division and LMA-INA from Aragon, and SOLEIL Synchrotron for granting beamtime for XRD experiments and the DiffAbs beamline personnel for help. L.S. and J.J. also acknowledge their FPU-MINECO PhD grant, S.R. and N.C. thank University of Girona and Generalitat de Catalunya fort their PhD FI grant, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suppression of superconductivity at the nanoscale in chemical solution derived YBa2Cu3O7−δ thin films with defective Y2Ba4Cu8O16 intergrowths

  • Li, Ziliang
  • Coll, Mariona
  • Mundet, Bernat
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
The analysis of the microstructure and superconducting behavior of chemical solution deposited epitaxial YBa2Cu3O7-δ films, with thickness going down to 5 nm has been carried out with the purpose to disclose the behavior of the most common intergrowth in these films, the Y2Ba4Cu8O16. The analysis of ultrathin films is a unique opportunity to investigate the superconducting behavior of these nanoscale defects because of the high concentration created as a consequence of the elastic energy associated to the misfit strain. Magnetic susceptibility and X-ray diffraction measurements evidence a strong decrease of the superconducting volume correlated with an increase of the intergrowth volume fraction. We demonstrate that these intergrowths are non-superconducting nanoscale regions where Cooper pair formation is disrupted, in agreement with their key role as artificial pinning centers for vortices in YBa2Cu3O7-δ films and coated conductors., All authors acknowledge the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project and ULTRASUPERTAPE ERC-2014-ADG-669504), MINECO (COACHSUPENERGY, MAT2014-51778-C2-1-R and SuMaTe RTI2018-095853-B-C21), COST Action NANOCOHYBRI (CA16218) and Generalitat de Catalunya (2017SGR 1519). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors acknowledge the Scientific Services at ICMAB, the ICN2 Electron Microscopy Division and LMA-INA for offering access to their instruments and expertise. M.C. also acknowledge the Ramon y Cajal program (RYC-2013-12448). Z.L. acknowledges the China Scholarship Council (CSC) and B.M. the Spanish Ministry for his PhD grant (BES-2015- 072749f)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pyrolysis study of solution-derived superconducting YBa2Cu3O7 films: disentangling the physico-chemical transformations

  • Villarejo, Bohores
  • Pop, Cornelia
  • Ricart, Susagna
  • Mundet, Bernat
  • Palau, Anna
  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
Chemical solution deposition (CSD) of epitaxial YBa2Cu3O7 (YBCO) films is a high throughput, cost-effective approach to grow high critical current superconducting conductors for power applications. Achieving high critical currents requires to grow epitaxial films with large thicknesses and this is still an open issue in CSD. Metalorganic precursor solution deposition can be tailored to achieve high film thicknesses, however, the pyrolysis step may heavily compromise the film quality due to the in-plane stress generated by a strong film shrinkage. Here, we disclose the complex relationship existing during the pyrolysis process between the physico-chemical transformations and the microstructure of the films. A low-fluorine trifluoroacetate (TFA) and propionate(prop), route to YBCO films with a final thicknesses in the range of 700 – 800 nm was studied to understand the phenomena. Morphological analysis by in-situ optical microscopy video imaging under specific heating rates allowed to identify the thermokinetic conditions leading to permanent or reversible wrinkling and crack formation. The origin of the microstructural transformations during the pyrolysis of thick films has been disentangled through parallel in-situ analyses of the chemical, thermal and mechanical properties, together with film thickness measurements. A key finding has been the identification of an intermediate liquid phase relieving the compressive stress responsible of wrinkling. Disclosing the origin of the physico - chemical transformations opens the path towards defining optimized pyrolysis processing conditions for high quality single deposition of CSD films., Authors acknowledge the EUROTAPES project (EU-FP7 NMP-LA2012-280432), COACHSUPENERGY (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R) and SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22) from MINECO (co-financed by the European Regional Development Fund), 2017-SGR 753 from Generalitat de Catalunya, and COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors acknowledge the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. We thank CNM-IMB for the use of their FIB services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Embedded Magnetism in YBa2Cu3O7 Associated with Cu–O Vacancies within Nanoscale Intergrowths: Implications for Superconducting Current Performance

  • Bartolomé, Elena
  • Mundet, Bernat
  • Guzmán, Roger
  • Gázquez, Jaume
  • Valvidares, Manuel
  • Herrero Martín, Javier
  • Pellegrin, Eric
  • Puig Molina, Teresa
  • Obradors, Xavier
Stacking faults are ubiquitous structural defects in YBa2Cu3O7 high-Tc superconductors. Far from being detrimental, the control of the defect landscape, i.e., the length, density, and distribution of YBa2Cu4Oy (Y124) intergrowths, changing the nanostrain of the material can be used to enhance the vortex pinning properties of the superconductor, as required for applications. Recently, the use of advanced scanning transmission electronic microscopy has unveiled the presence of complex point nanodefects (clusters of Cu and O vacancies) within Y124, with an associated magnetic moment predicted by density functional calculations. In this work, we investigate the nature of defect-driven embedded magnetism in YBCO samples (thin films, nanocomposites, and a single crystal) containing different distributions of Y124 intergrowths using X-ray magnetic circular dichroism (XMCD), combined with scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS). The dichroic Cu signal correlates with the density of Y124 intergrowths, demonstrating the defect-driven origin of the embedded magnetism. Remarkably, a Cu XMCD signal is observed even in the single crystal, associated with the small presence of defects at the surface. Our work thus demonstrates the ubiquity of embedded magnetism in YBCO associated with faulted Y124 defects., We thank G. Nieva from Centro Atómico de Bariloche for YBCO single-crystal supply, and S. Hartman and R. Mishra from Oak Ridge National Laboratory for discussions on DFT simulations. We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant SEV-2015-0496), COACHSUPERENERGY (Grant MAT2014-51778-C2-1-R), SUMATE Project RTI2018-095853-B-C21, co-financed by the European Regional Development Fund, COST-Nanohybri CA16218, DWARFS project (Grant MAT2017-83468-R) and Catalan Government with Grant 2017-SGR-1519. The XMCD experiments were performed at the BOREAS beamline of the ALBA Synchrotron Light Facility with the collaboration of ALBA staff. The STEM microscopy work was conducted in “Laboratorio de Microscopias Avanzadas” at the Instituto de Nanociencia de Aragon-Universidad de Zaragoza. We acknowledge the LMA-INA for offering access to their instruments and expertise. STEM-EELS analysis was conducted at the Center for Nanophase Materials Sciences, which is a DOE Office of Science User Facility. J.G. also acknowledges the Ramón y Cajal program (Grant RYC-2012-11709)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid approach to obtain high-quality BaMO3 perovskite nanocrystals

  • Chamorro, Natalia
  • Martínez Esaín, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Ros, Josep
  • Yáñez, Ramón
  • Ricart, Susagna
A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported. This new synthetic methodology sets a whole general route to successfully tune the sizes of high-quality BaMO3 (M = Ti4+, Zr4+, and Hf4+) perovskite nanocrystals. Purely cubic-phase nanocrystals (stable in alcohol media) were obtained using controlled water amounts, combining the well-known aqueous sol–gel process with the classic solvothermal method. Exhaustive optimizations revealed feasibility of a fast (1 hour) and reproducible synthesis with small variations in the crystal size or agglomeration parameters. The study also reveals water content as the pivotal factor to achieve this wide range of sizes through a controlled hydrolytic step. Finally, the study of the hydrolytic process made it possible to shed some light on mechanistic insights of this synthetic route., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, cofinanced by the European Regional Development Fund) and SUPERINKS project (RTC-2015-3640-3, cofinanced by the European Regional Development Fund). We also thank support from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and ULTRASUPERTAPE project (H2020 ERC-2014-ADG-669504) and from the Catalan Government with 2014-SGR-753 and Xarmae. The authors acknowledge the technical support of Servei de Microscópia, and Servei de Difracció de Raigs- X, all at the UAB, and Dr Judith Oró (Microscope Service) at the ICMAB-CSIC, Dr Guillaume Sauthier for his support in XPS analysis. NCG acknowledge the PIF predoctoral fellowship from the Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Performance of Superconducting YBa2Cu3O7 Thick Films Prepared by Single-Deposition Inkjet Printing

  • Villarejo, Bohores
  • Pino, Flavio
  • Pop, Cornelia
  • Ricart, Susagna
  • Vallés, Ferran
  • Mundet, Bernat
  • Palau, Anna
  • Roura, Pere
  • Farjas, Jordi
  • Chamorro, Natalia
  • Yáñez, Ramón
  • Granados, Xavier
  • Puig Molina, Teresa
  • Obradors, Xavier
Inkjet printing (IJP) is a very appealing cost-effective deposition technique to achieve large-area solution-derived functional films. For many applications, it is very challenging to increase the film thickness in order to achieve competitive performance, for instance, high critical currents in superconducting films. In this paper, the preparation of superconducting YBa2Cu3O7 thick films (∼1.1 μm) using a single deposition is reported. Specific rules for ink design, deposition protocols, and pyrolysis processes are provided. The most important aspect is to formulate an ink with a solvent having a high boiling point that keeps the whole film wet during deposition to avoid liquid movement due to coffee-ring effects. An additional success has been to modify the ink with a photocurable polyacrylic ester varnish which after polymerization with a UV LED lamp helps keep homogeneous thickness. This varnish also helped avoid the generation of film instabilities (wrinkling or cracking) during pyrolysis. Homogeneous pyrolyzed thick films are transformed into epitaxial thick films with high critical currents. The IJP process is shown to be valid to prepare nanocomposite films using colloidal inks including pre-prepared BaZrO3 nanoparticles. The nanocomposite thick films display enhanced vortex pinning, thus keeping high critical currents under high magnetic fields., The authors acknowledge the EUROTAPES project (EU-FP7 NMP-LA-2012-280432), COACHSUPENERGY (MAT2014- 51778-C2-1-R and MAT2014-51778-C2-2-R), SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) cofinanced by the European Regional Development Fund and SUPERINKS (RTC-2015-3840-S) from MINECO (cofinanced by the European Regional Development Fund), 2017-SGR 753 from Generalitat de Catalunya, and COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence awards Severo Ochoa SEV2015-0496 and CEX2019-000917-S. The authors acknowledge the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and LMA-INA from Aragon. They also acknowledge KAO Chimigraf for providing varnishes and Bruker HTS for providing metallic substrates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-Space Image of Charged Patches in Tunable-Size Nanocrystals

  • Martinez Esain, Jordi
  • Pérez Rodríguez, Ana
  • Faraudo, Jordi
  • Barrena, Esther
  • Yáñez, Ramón
  • Ocal, Carmen
  • Ricart, Susagna
The remarkable dual nature of faceted-charge patchy metal fluoride nanocrystals arises from the spontaneous selective coordination of anionic and cationic ligands on the different facets of the nanocrystals. In previous studies, the identification and origin of the charge at the patches were obtained by combining computer simulations with indirect experimental evidence. Taking a step further, we report herein the first direct real-space identification by Kelvin probe force microscopy of the predicted faceted-charge patchy behavior, allowing the image of the dual faceted-charge surfaces. High-resolution transmission electron microscopy reveals the detailed nanocrystal faceting and allows unambiguously inferring the hydrophilic or hydrophobic role of each facet from the identification of the surface atoms exposed at the respective crystallographic planes. The success of the study lies in a foresighted synthesis methodology designed to tune the nanocrystal size to be suitable for microscopy studies and demanding applications., This work was supported by the Spanish Government through the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S), the COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and PID2019-110907GB-I00. We also thank the support from the European Union for the ERC Advanced Grant (ULTRASUPERTAPE (ERC-2014-ADG-669504) and IMPACT (ERC-2019-PoC-874964) projects) funded by the European Research Council and from the Catalan Government through 2014-SGR753 and Xarmae., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Normal zone propagation in various REBCO tape architectures

  • Lacroix, Christian
  • Giguère, Jaël
  • Bergeron Hartman, Simon Mathieu
  • Ben Saad, Haïfa
  • Martin, Anthony
  • Leduc, Thomas
  • Gendron-Paul, Maxime
  • Bellil, Zakaria
  • Fournier-Lupien, Jean-Hughes
  • Moret, Lucile
  • Barusco, Pedro
  • Granados, Xavier
  • Obradors, Xavier
  • Pekarčíková, Marcela
  • Gömöry, Fedor
  • Grosse, Veit
  • Bauer, Markus
  • Sirois, Frédéric
The normal zone propagation velocity (NZPV) of three families of REBCO tape architectures designed for superconducting fault current limiters and to be used in high voltage direct current transmission systems has been measured experimentally in liquid nitrogen at atmospheric pressure. The measured NZPVs span more than three orders of magnitude depending on the tape architectures. Numerical simulations based on finite elements allow us to reproduce the experiments well. The dynamic current transfer length (CTL) extracted from the numerical simulations was found to be the dominating characteristic length determining the NZPV instead of the thermal diffusion length. We therefore propose a simple analytical model, whose key parameters are the dynamic CTL, the heat capacity and the resistive losses in the metallic layers, to calculate the NZPV., The authors acknowledge the funding of this research by FASTGRID Project (EU-H2020, 721019), the Projects COACHSUPENERGY (MAT2014-51778-C2-1-R), SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) from the Spanish Ministry of Economy and Competitiveness which were cofunded by the European Regional Development Fund, the Project 2017-SGR 753 from Generalitat de Catalunya and the COST Action NANOCOHYBRI (CA16218). Polytechnique Montréal authors also acknowledge NSERC (Canada), FRQNT (Québec), the RQMP infrastructure and CMC microsystems for financial support. ICMAB authors also acknowledge the Center of Excellence awards Severo Ochoa SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Solution Deposition of Insulating Yttria Nanolayers as Current Flow Diverter in Superconducting GdBa2Cu3O7-δ Coated Conductors

  • Barusco, Pedro
  • Granados, Xavier
  • Saltarelli, Lavinia
  • Fournier-Lupien, Jean-Hughes
  • Lacroix, Christian
  • Saad, Haifa Ben
  • Sirois, Frédéric
  • Vlad, Valentina Roxana
  • Calleja, Albert
  • Grosse, Veit
  • Puig Molina, Teresa
  • Obradors, Xavier
The primary benefit of a metallic stabilization/shunt in high temperature superconductor (HTS) coated conductors (CCs) is to prevent joule heating damage by providing an alternative path for the current flow during the HTS normal state transition (i.e., quench). However, the shunt presence in combination with unavoidable fluctuations in the critical current (I c) of the HTS film can develop a localized quench along the CC's length if the operational current is kept close to I c. This scenario, also known as the hot-spot regime, can lead to the rupture of the CC if the local quench does not propagate fast enough. The current flow diverter (CFD) is the CC architecture concept that has proven to increase the conductor's robustness against a hot-spot regime by simply boosting the quench velocity in the CC, which avoids the shunt compromise in some applications. This work investigates a practical manufacturing route for incorporating the CFD architecture in a reel-to-reel system via the preparation of yttrium oxide (Y2O3) as an insulating thin nanolayer (∼100 nm) on top of a GdBa2Cu3O7 (GdBCO) superconductor. Chemical solution deposition (CSD) using ink jet printing (IJP) is shown to be a suitable manufacturing approach. Two sequences of the experimental steps have been investigated, where oxygenation of the GdBCO layer is performed after or before the solution deposition and the Y2O3 nanolayer thermal treatment formation step. A correlated analysis of the microstructure, in situ oxygenation kinetics, and superconducting properties of the Ag/Y2O3/GdBCO trilayer processed under different conditions shows that a new customized functional CC can be prepared. The successful achievement of the CFD effect in the case of the preoxygenated customized CC was confirmed by measuring the current transfer length, thus demonstrating the effectiveness of the CSD-IJP as a processing method., We acknowledge the funding of this research by FASTGRID Project (EU-H2020, 721019); the Projects COACHSUPENERGY (MAT2014-51778-C2-1-R) and SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) from the Spanish Ministry of Economy and Competitiveness, which were cofunded by the European Regional Development Fund; and the Project 2017-SGR 753 from Generalitat de Catalunya and the COST Action NANOCOHYBRI (CA16218). ICMAB authors also acknowledge the Center of Excellence awards Severo Ochoa SEV-2015-0496 and CEX2019-000917-S, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measuring the viscosity of films by thermomechanical analysis: application to metal organic precursor films of functional oxides

  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • López Olmedo, Joan Pere
  • Villarejo, Bohores
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
We have developed a new method to measure the viscosity of micrometric films by thermomechanical analysis with a hemispherical probe of millimetric diameter. The loading curve (displacement vs. time) recorded as the probe tip crosses the whole film at constant load until it touches the substrate is fitted to a theoretical curve shape that has been obtained after solving the problem of liquid flow under the probe tip. The method has been validated by measuring the viscosity of rosin films. It has been applied to analyze the thermal evolution of unstable liquid films that appear on Ba propionate, Ce(III) propionate and a low-fluorine precursor film of YBa2Cu3O6+x. During pyrolysis of the last two films, viscosity first diminishes due to heating and then it increases as solid oxide particles are formed inside the liquid., This work has been partially funded by the Spanish Programa Nacional de Materiales through projects MAT2014-51778-C2-1-R, MAT2014-51778-C2-2-R, RTI2018-095853-B-C21, RTI2018-095853-B-C22, PID2021-127297OB-C21 and PID2021-127297OB-C21, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE and also by the Generalitat de Catalunya contract No. 2017-SGR001519 and by the Universitat de Girona contract No. MPCUdG2016/059. We are indebted to the Serveis Generals de Recerca (SGR) of the University of Girona for the use of the thermal analysis facilities. We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S. We are grateful to Aleix Prat for doing TMA preliminary experiments., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A sulfurization method for creating the buffer-layers current flow diverter architecture in REBa2Cu3O7 coated conductors

  • Barusco, Pedro
  • Giguère, Jael
  • Lacroix, Christian
  • Sirois, Frédéric
  • Granados, Xavier
  • Puig Molina, Teresa
  • Obradors, Xavier
The current flow diverter (CFD) is a known concept that has proven to effectively reduce the probability of destructive hot spots in REBa2Cu3O7 (REBCO; RE = rare earth) coated conductors (CCs) by boosting the normal zone propagation velocity. However, the implementation of the CFD concept requires additional steps in a fabrication process that is already complex and has struggled to find a simple reel-to-reel fabrication method. This work reports on the details of a fabrication route for the buffer-layers-CFD (bCFD) architecture using a solid-vapor silver sulfurization technique to tune the geometry of the metal stabilizer in the high-temperature superconductor tape. The analysis of the microstructure and superconducting properties of the Ag2S/Ag/GdBCO trilayer processed under different conditions shows how we achieved a new customized functional CC with the bCFD architecture. In DC limitation experiments, this bCFD-sulfide architecture allowed to generate an electric potential much faster than the conventional architecture (60 V s−1 vs. 1.2 V s−1) thanks to the strong enhancement of the NPZV., The authors acknowledge the funding of this research by the FASTGRID project (EU-H2020, 721019), the projects COACHSUPENERGY (MAT2014-51778-C2-1-R), SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) from the Spanish Ministry of Economy and Competitiveness which were co-funded by the European Regional Development Fund, the project 2017-SGR 753 from Generalitat de Catalunya and the COST Action NANOCOHYBRI (CA16218). ICMAB authors also acknowledge the Center of Excellence awards Severo Ochoa SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Progress in superconducting REBa2Cu3O7 (RE = rare earth) coated conductors derived from fluorinated solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Palau, Anna
  • Coll, Mariona
  • Gutierrez Royo, Joffre 
  • Farjas, Jordi
  • Bartolomé, Elena
In this work, we review recent progress achieved in the use of chemical solution deposition (CSD) based on fluorinated metalorganic precursors to grow superconducting REBa2Cu3O7 (REBCO) films and coated conductors (CCs). We examine, first of all, the advances in optimizing the steps related to the solutions preparation, deposition and pyrolysis based on novel low-fluorine metalorganic solutions. We show that a new type of multifunctional colloidal solutions including preformed nanoparticles (NPs), can be used to introduce artificial pinning centers (APCs). We analyze how to disentangle the complex physico-chemical transformations occurring during the pyrolysis with the purpose of maximizing the film thicknesses. Understanding the nucleation and growth mechanisms is shown to be critical to achieve a fine tuning of the final microstructure, either using the spontaneous segregation or the colloidal solution approaches, and make industrially scalable this process. Advanced nanostructural studies have deeply modified our understanding of the defect structure and its genealogy. It is remarkable the key role played by the high concentration of randomly distributed and oriented BaMO3 (M = Zr, Hf) NPs which enhance the concentration of APCs, such as stacking faults and the associated partial dislocations. Correlating the defect structure with the critical current density Jc (H,T,θ) allows to reach a tight control of the vortex pinning properties and to devise a general scheme of the vortex pinning landscape in the whole H-T phase diagram. We also refer to the outstanding recent achievements in enhancing the vortex pinning strength by shifting the carrier concentration in REBCO films towards the overdoped state, where the pinning energy is maximum and so, record values of critical current densities are achieved. This confirms the performance competitiveness of nanocomposite CCs prepared through the CSD route. We conclude with a short summary of the progress in scaling the CC manufacturing using fluorinated solutions., Authors acknowledge the European Union Research Council for EUROTAPES (EU-FP7-NMP-LA-2012-280432) and FASTGRID (EU-H2020, 721019) projects and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144); the European Research Council for ULTRASUPERTAPE (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998) projects. Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for COACHSUPENERGY project (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R), SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22), SUPERENERTECH (PID2021-127297OB-C21, PID2021-127297OB-C22) and PID2022-138492NB-I00, FUNMAT and FUNFUTURE ICMAB 'Severo Ochoa' Program for Centers of Excellence in R&D (SEV-2015-0496, CEX2019-000917-S) and HTS-JOINTS (PDC2022-133208-I00). They also thank the PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and Catalan Government for 2017 SGR 1519 and 2021 SGR 00440 and that of Aragon for RASMIA (E12-23R)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid YBa2Cu3O7 Superconducting-Ferromagnetic Nanocomposite Thin Films Prepared from Colloidal Chemical Solutionsilms Prepared from Colloidal Chemical Solutions

  • Bartolomé, Elena
  • Cayado, Pablo
  • Solano, Eduardo
  • Mocuta, Cristian
  • Ricart, Susagna
  • Mundet, Bernat
  • Coll, Marionna
  • Gázquez, Jaume
  • Meledin, Alexander
  • Tendeloo, Gustaaf van
  • Valvidares, S. Manuel
  • Herrero Martín, Javier
  • Gargiani, Pierluigi
  • Pellegrin, Eric
  • Magén, Cesar
  • Puig Molina, Teresa
  • Obradors, Xavier
High Tc superconductor–ferromagnetic heterostructures constitute an appealing playground to study the interplay between flux vortices and magnetic moments. Here, the capability of a solution-derived route to grow hybrid YBa2Cu3O7-ferromagnetic nanocomposite epitaxial thin films from preformed spinel ferrite (MFe2O4, M = Mn, Co) nanoparticles (NPs) is explored. The characterization, performed using a combination of structural and magnetic techniques, reveals the complexity of the resulting nanocomposites. Results show that during the YBCO growth process, most of the NPs evolve to ferromagnetic double-perovskite (DP) phases (YBaCu2−x−yFexCoyO5/YBaCoFeO5), while a residual fraction of preformed ferrite NPs may remain in the YBCO matrix. Magnetometry cycles reflect the presence of ferromagnetic structures associated to the DPs embedded in the superconducting films. In addition, a superparamagnetic signal that may be associated with a diluted system of ferromagnetic clusters around complex defects has been detected, as previously observed in standard YBCO films and nanocomposites. The hybrid nanocomposites described in this work will allow studying several fundamental issues like the nucleation of superconductivity and the mechanisms of magnetic vortex pinning in superconducting/ferromagnetic heterostructures., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, cofinanced by the European Regional Development Fund), and from the Catalan Government with 2014-SGR-753 and Xarmae. Some of the electron microscopy work has also been conducted in the Laboratorio de Microscopías Avanzadas (LMA) at Instituto de Nanociencia de Aragón (INA) at the University of Zaragoza. Part of the electron microscopy work in EMAT group (University of Antwerp) was performed within the framework of the EUROTAPES project (FP7-NMP.2011.2.2-1 Grant No. 280432), funded by the European Union. Work at INA-LMA was supported by NanoAraCat. Research at UCM (J.S.) was supported by the ERC starting Investigator Award, Grant No. 239739 STEMOX and Juan de la Cierva Program JCI-2011-09428 (MICINN-Spain). The XMCD experiments were performed at the BOREAS beamline of the ALBA Synchrotron Light Facility with the collaboration of ALBA staff. The authors would like to thank SOLEIL synchrotron for allocating beamtime and the DiffAbs beamline staff for help during the experiments., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Competition between Superconductor-Ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco, V.
  • Córdoba, R.
  • De Teresa, J.M.
  • Rodríguez, L.A.
  • Navau, C.
  • Del-Valle, N.
  • Via, G.
  • Sánchez, A.
  • Monton, C.
  • Kronast, F.
  • Obradors, X.
  • Puig, T.
  • Palau, A.
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-Temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC)-ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-Trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Emerging Diluted Ferromagnetism in High-T-c Superconductors Driven by Point Defect Clusters

  • Gazquez, J.
  • Guzman, R.
  • Mishra, R.
  • Bartolome, E.
  • Salafranca, J.
  • Magen, C.
  • Varela, M.
  • Coll, M.
  • Palau, A.
  • Valvidares, S.M.
  • Gargiani, P.
  • Pellegrin, E.
  • Herrero-Martin, J.
  • Pennycook, S.J.
  • Pantelides, S.T.
  • Puig, T.
  • Obradors, X.
Defects in ceramic materials are generally seen as detrimental to their functionality and applicability. Yet, in some complex oxides, defects present an opportunity to enhance some of their properties or even lead to the discovery of exciting physics, particularly in the presence of strong correlations. A paradigmatic case is the high-temperature superconductor YBa2Cu3O7-delta(Y123), in which nanoscale defects play an important role as they can immobilize quantized magnetic flux vortices. Here previously unforeseen point defects buried in Y123 thin films that lead to the formation of ferromagnetic clusters embedded within the superconductor are unveiled. Aberration-corrected scanning transmission microscopy has been used for exploring, on a single unit-cell level, the structure and chemistry resulting from these complex point defects, along with density functional theory calculations, for providing new insights about their nature including an unexpected defect-driven ferromagnetism, and X-ray magnetic circular dichroism for bearing evidence of Cu magnetic moments that align ferromagnetically even below the superconducting critical temperature to form a dilute system of magnetic clusters associated with the point defects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-xGdxO2-y nanowires derived from chemical solutions

  • Queralto, A.
  • de la Mata, M.
  • Martinez, L.
  • Magen, C.
  • Gibert, M.
  • Arbiol, J.
  • Huhne, R.
  • Obradors, X.
  • Puig, T.
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a highthroughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures'' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce0.9Gd0.1O2-y (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO3 (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001) CGO[ 0-11]parallel to(011) LAO[100] growth orientation, with the enlargement occurring along the [0-11] CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min(-1)) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Singular spectrum analysis filtering and Fourier inversion: an efficient and fast way to improve resolution and quality of current density maps with low-cost Hall scanning systems

  • Amorós, J.
  • Duran, Arnau
  • Carrera i Vilanova, Miquel
  • López, Josep
  • Granados, X.
We provide a Biot–Savart inversion scheme that, for any two-dimensional, or bulk with planar crystallization, high-temperature superconducting (HTS) sample, determines current density maps with a higher resolution and accuracy than previous procedures and at a fraction of its computational cost. The starting point of our scheme is a Hall scanning microscopy map of the out-of-plane component of the magnetic field generated by the current. Such maps are noisy in scans of real samples with commercial-grade equipment, and their error is the limiting factor in any Biot–Savart inversion scheme. The main innovation of our proposed scheme is a singular spectrum analysis (SSA) filtering of the Hall probe maps, which cancels measurement errors such as noise or drifts without introducing any artifacts in the field map. The SSA filtering of the Hall probe data is so successful in this task that the resulting magnetic field map does not require an overdetermined QR inversion, allowing Fourier inversion of the Biot–Savart problem. Our implementation of SSA filtering of the Hall scan measurements, followed by Biot–Savart inversion using the fast Fourier transform (FFT), is applied to both simulations and real samples of HTS tape stacks. The algorithm works in cases where ill conditioning ruled out the application of Fourier inversion, and achieves a finer resolution for a fraction of the cost of the QR inversion used to date. The computation passes physical and statistical validity tests in all cases, and in three-dimensional samples it is shown to yield the average, with a depth-dependent weight, of the current density circulating in the different layers of the sample., We acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by FEDER), GAP project (MTM2015-69135-P) and SUPERINKS project (RTC-2015-3640-3, co-financed by FEDER); the European Union for the FASTGRID project (H2020-NMBP-18-2016-IA-72109) and WPMAG 5 (H2020-EUROfusion); and the Catalan Government with 2017-SGR-932, 2014-SGR-753 and Xarmae.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Torsional dependence of the critical current in 2G tapes

  • Sotelo, G. G.
  • Granados, X.
  • Carrera i Vilanova, Miquel
  • López López, José
Since the second-generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year, the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field, and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken into account since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications such as fault-current limiters, superconducting magnetic energy storage, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, this paper studies the electrical and mechanical properties of 12-mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU under the Project EU FP7-2013- ICT-609029 FORTISSIMO, Project EU-FP7 NMP-LA-2012-280432 EUROTAPES, Project Eurofusion PPPT-WPMAG 2014, and EU COST ACTIONS MP1201and MP1014; by MINECO under Grant RTC-2014-1740-3 and Grant MAT2014-51778-C2-1-R, by Generalitat de Catalunya (Xarmae), and by CNPq (Ciencia sem Fronteiras).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Conformal oxide nanocoatings on electrodeposited 3D porous Ni films by atomic layer deposition

  • Zhang, Jin
  • Coll, Maria Dolors
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A versatile chemical synthesis procedure to obtain Al2O3 and Co2FeO4 nanolayers conformally coating a three-dimensional (3D) porous Ni film is presented. First, porous Ni is grown by hydrogen bubble template-assisted electrodeposition. Subsequently, Al2O3 and Co2FeO4 layers, with thickness ranging from 5 nm to 25 nm, are directly deposited onto the pore walls by atomic layer deposition, while maintaining the porous architecture and magnetic properties of the Ni scaffold. The crystal structure, thickness and distribution of elements within the composite coatings are investigated in detail. The resulting magnetic and wettability properties are assessed. Contact angle tests reveal that 3D porous Ni films become more hydrophilic after coating with Al2O3 or Co2FeO4. From a technological point of view, the obtained composite porous films could be appealing for applications like magnetically-actuated micro/nano-electromechanical systems (MEMS/NEMS) or bio-MEMS/NEMS, among others.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spontaneous formation of spiral-like patterns with distinct periodic physical properties by confined electrodeposition of Co-In disks

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • Gonzalez-Rosillo, Juan Carlos
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Illa, Xavi|||0000-0002-3212-1128
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • Baró, M. D.|||0000-0002-8636-1063
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Spatio-temporal patterns are ubiquitous in different areas of materials science and biological systems. However, typically the motifs in these types of systems present a random distribution with many possible different structures. Herein, we demonstrate that controlled spatio-temporal patterns, with reproducible spiral-like shapes, can be obtained by electrodeposition of Co-In alloys inside a confined circular geometry (i.e., in disks commensurate with the typical size of the spatio-temporal features). These patterns are mainly of compositional nature, i.e., with virtually no topographic features. Interestingly, the local changes in composition lead to a periodic modulation of the physical (electric, magnetic and mechanical) properties. Namely, the Co-rich areas show higher saturation magnetization and electrical conductivity and are mechanically harder than the In-rich ones. Thus, this work reveals that confined electrodeposition of this binary system constitutes an effective procedure to attain template-free magnetic, electric and mechanical surface patterning with specific and reproducible shapes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Competition between superconductor, ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco Gómez, Víctor
  • Córdoba, R.
  • De Teresa, J. M.
  • Rodríguez, L. A.
  • Navau, Carles|||0000-0003-4763-5305
  • Valle, Nuria del|||0000-0003-2608-5009
  • Via, Guillem|||0000-0002-4789-1600
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Monton, Carlos
  • Kronast, F.
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Palau, Anna|||0000-0002-2217-164X
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Inkjet-printed chemical solution Y₂O₃ layers for planarization of technical substrates

  • Vilardell, Marta
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Sort, Jordi|||0000-0003-1213-3639
  • Vlad, Roxana
  • Fernández, Juan Carlos
  • Puig, Joaquim|||0000-0003-0600-1023
  • Usoskin, Alexander
  • Palau, Anna|||0000-0002-2217-164X
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Calleja, Ana
The implementation of the Chemical Solution Deposition (CSD) methodology with 23 the Drop on Demand (DoD) inkjet printing (IJP) technology has been successfully employed to 24 develop a Solution Deposition Planarization (SDP) method. We have used nanocrystalline yttrium 25 oxide (Y₂O₃) to decrease the roughness of technical metallic substrates by filling the surface 26 imperfections and thus avoiding costly polishing steps. This alternative process represents an 27 outstanding methodology to reduce the final cost of the 2G coated conductors manufacturing. 28 Two Y₂O₃ metalorganic precursor inks formulations were successfully developed and tested to 29 obtain surfaces as smooth as possible with adequate mechanical properties to hold the internal 30 stresses developed during the subsequent layers growth. 31 By using these inks as precursors for IJP and after a proper tuning of the rheological and 32 wetting parameters, we firstly obtained short length uniform 100nm-thick Y₂O₃-SDP films on 33 unpolished stainless steel substrate from Bruker HTS. The scalability of the reel to reel (R2R)-IJP 34 process to 100m is then demonstrated on metallic substrates as well. A complete characterization of 35 the prepared short and long length SDP-Y₂O₃ inkjet-printed layers was carried out by optical 36 microscopy, FIB-SEM (Focus Ion Beam coupled to Scanning Electron Microscopy), XRD (X-Ray 37 Diffraction), AFM (Atomic Force Microscopy), reflectometry and nanoindentation techniques. Then, 38 the morphology, thickness, crystallinity and mechanical properties were evaluated, together with 39 the surface roughness in order to assess the resulting layer planarity. The impact of planarity was 40 additionally studied via growth of biaxially textured buffer layers as well as further functional 41 layers. 1.1µm-thick YSZ layers with in-plane textures better than the SS polished reference were 42 successfully deposited on top of the 100 nm SDP-Y2O3 films yielding 50% of Ic in contrast to the 43 standard reference.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electric-field adjustable time-dependent magnetoelectric response in martensitic FeRh alloy

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Martí Rovirosa, Xavier
  • Macià, Ferran|||0000-0001-5972-4810
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Sort, Jordi|||0000-0003-1213-3639
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic-ferromagnetic phases in FeRh, unbalanced by voltage-controlled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the Nucleation and Coarsening Mechanisms of Solution-Derived Self-Assembled Epitaxial Ce0.9Gd0.1O2-y Nanostructures

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Self-Assembling approaches based on chemical solution deposition (CSD) are ideal methods for the cost-effective production of epitaxial nanostructures with high throughput. Therefore, an in-depth investigation of the nucleation and coarsening processes involved in the self-Assembly of nanostructures is mandatory to achieve a good control over nanostructure shape, dimensions, and orientation. Heteroepitaxial CeGdO (CGO) is an ideal model system to unveil the underlying nanostructure development mechanisms in addition to their promising properties for catalysis, gas sensors, and ionic conductivity. Rapid thermal annealing furnaces have been used to study separately the thermodynamic and kinetic nucleation and coarsening mechanisms of self-Assembled CGO isotropic and anisotropic nanostructures based on strain-engineering and surface energies control. Different CGO nanoislands are obtained: isotropic (001)CGO nanodots are grown on (001)-oriented YO:ZrO(YSZ) and LaAlO (Lao) substrates, whereas (011)Lao substrates promote the growth of elongated (011)CGO nanowires. HRTEM and RHEED analyses are used to study the early stages of nucleation, as well as the shape and interfacial structure of CGO nanostructures. A systematic study with the heating ramp, annealing temperature and time, and strain in combination with thermally activated theoretical models provides information on the nucleation behavior, nucleation barriers, and atomic diffusion coefficients along in-plane and out-of-plane island orientations. Highly anisotropic atomic diffusion constants have been shown to be at the origin of the high aspect ratios of some of the nanostructures. Overall, our study provides a general method for the evaluation of nucleation and coarsening of multiple CSD-derived oxide nanostructures and understanding the shape development by combining thermodynamic and kinetic approaches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrafast Epitaxial Growth Kinetics in Functional Oxide Thin Films Grown by Pulsed Laser Annealing of Chemical Solutions

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The crystallization process and physical properties of different functional oxide thin films (CeZrO, LaNiO, BaSrTiO, and LaSrMnO) on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) are studied by pulsed laser annealing (PLA). A Nd:YAG laser source (λ = 266 nm, 10 Hz and τ ∼3 ns) is employed to crystallize chemical solution deposited (CSD) amorphous/nanocrystalline films under atmospheric conditions. We provide new insight on the influence of photochemical and photothermal interactions on the epitaxial crystallization kinetics of oxide thin films during the transformation from amorphous/polycrystalline material (i.e., atomic diffusion, epitaxial growth rates, and activation energies of nucleation and crystallization). The epitaxial growth is investigated by varying the laser fluence and the applied number of pulses. The morphology, structure, and epitaxial evolution of films are evaluated by means of atomic force and transmission electron microscopies and X-ray diffraction. Highly epitaxial oriented films of 20-40 nm in thickness are obtained by PLA. The crystallization kinetics of laser treatments is determined to be orders of magnitude faster than thermal treatments with similar activation energies (1.5-4.1 eV), mainly due to the large temperature gradients inducing modified atomic diffusion mechanisms derived mainly from photothermal interactions, as well as a minor contribution of photochemical effects. The fast heating rates achieved by PLA also contribute to the fast epitaxial growth due to reduced coarsening of polycrystalline material. The measurement of the physical properties (electrical resistivity and magnetism) of laser processed CSD films has revealed significantly good functionalities, close to those of thermally grown films, but with much shorter processing times.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultraviolet pulsed laser crystallization of Ba0.8Sr0.2TiO3 films on LaNiO3-coated silicon substrates

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Trolier-McKinstry, Susan
In this work, BaSrTiO (BST) films on LaNiO-buffered SiO/Si (LNO/SiO/Si) substrates were crystallized by pulsed laser irradiation. Solution-derived amorphous barium-strontium-titanate precursor layers were crystallized with a KrF excimer laser in oxygen ambient at fluences ranging from 50 to 75 mJ cm. With the substrate temperature set to 500 °C, the number of pulses and film thickness were varied until high-quality crystallinity could be achieved. It was found that films with a thickness of 40 nm are fully crystallized with a uniaxial {00l} orientation which is predetermined by the LaNiO orientation. On the other hand, for 160 nm thick films, crystallization was observed after 12,000 pulses in the 70 nm close to the surface, while the rest of the film remained amorphous. The large temperature difference between the film surface and interface due to the low thermal conductivity of the amorphous BST is suggested as the origin of this behavior. Films thicker than 80 nm cracked on crystallization due to the stress caused by the different thermal expansion coefficients of film and substrate, as well as the large temperature variations within the BST film.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-, XGdxO2- y nanowires derived from chemical solutions

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Martínez Orellana, Lidia|||0000-0002-9370-2962
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Gibert, Marta|||0000-0001-8856-6831
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce₀.₉Gd₀.₁O₂ᵧ (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO₃ (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO[0-11](011)LAO[100] growth orientation, with the enlargement occurring along the [0-11]CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min⁻¹) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Geometrically controlled ratchet effect with collective vortex motion

  • Rouco Gómez, Víctor
  • Palau, Anna|||0000-0002-2217-164X
  • Monton, Carlos
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Rectified flux motion arising from the collective effect of many interacting vortices is obtained in a specially designed superconducting device. Ratchet structures with different asymmetric pinning potentials are generated by tuning the size, depth, and distribution of triangular blind-antidots in a high-temperature superconducting film. We experimentally and theoretically demonstrate that the amplitude and sign of the rectified vortex motion can be finely tuned with the pattern geometry. Two different dynamical regimes depending on the nature of vortices initiating the dissipation are identified, which can control the rectified vortex motion.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable Self-Assembly of YF Nanoparticles by Citrate-Mediated Ionic Bridges

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Ricart, Susagna
  • Yáñez, Ramón|||0000-0002-2021-0924
Ligand-to-surface interactions are critical factors in surface and interface chemistry to control the mechanisms governing nanostructured colloidal suspensions. In particular, molecules containing carboxylate moieties (such as citrate anions) have been extensively investigated to stabilize metal, metal oxide, and metal fluoride nanoparticles. Using YF nanoparticles as a model system, we show here the self-assembly of citrate-stabilized nanostructures (supraparticles) with a size tunable by temperature. Results from several experimental techniques and molecular dynamics simulations show that the self-assembly of nanoparticles into supraparticles is due to ionic bridges between different nanoparticles. These interactions were caused by cations (e.g., ammonium) strongly adsorbed onto the nanoparticle surface that also interact strongly with nonbonded citrate anions, creating ionic bridges in solution between nanoparticles. Experimentally, we observe self-assembly of nanoparticles into supraparticles at 25 and 100 °C. Interestingly, at high temperatures (100 °C), this citrate-bridge self-assembly mechanism is more efficient, giving rise to larger supraparticles. At low temperatures (5 °C), this mechanism is not observed, and nanoparticles remain stable. Molecular dynamics simulations show that the free energy of a single citrate bridge between nanoparticles in solution is much larger than the thermal energy and in fact is much larger than typical adsorption free energies of ions on colloids. Summarizing our experiments and simulations, we identify as key aspects of the self-assembly mechanism the requirement of NPs with a surface able to adsorb anions and cations and the presence of multidentate ions in solution. This indicates that this new ion-mediated self-assembly mechanism is not specific of YF and citrate anions, as supported by preliminary experimental results in other systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Martí, Xavier
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Sort, Jordi|||0000-0003-1213-3639
  • Fontcuberta, Josep|||0000-0002-7955-2320
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrafast transient liquid assisted growth of high current density superconducting films

  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Banchewski, Juri|||0000-0002-6654-5527
  • Rasi, Silvia|||0000-0003-4935-3918
  • Chamorro, Natalia|||0000-0002-9531-1869
  • Guzmán Aluja, Roger|||0000-0002-5580-0043
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Mocuta, C.|||0000-0001-5540-449X
  • Ricart, S.
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, P.
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The achievement of high growth rates in YBaCuO epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s -1) and high critical current densities (5 MA cm -2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process. High throughput manufacturing of long length coated conductors requires fast epitaxial growth of high-temperature superconducting films. Here, Soler et al. report an ultrafast growth rates and high critical current densities of YBaCuO films using a transient liquid-assisted growth method.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Control of nanostructure and pinning properties in solution deposited YBaCuO nanocomposites with preformed perovskite nanoparticles

  • Li, Ziliang
  • Coll, Mariona|||0000-0001-5157-7764
  • Mundet, Bernat|||0000-0003-0608-2070
  • Chamorro, Natalia|||0000-0002-9531-1869
  • Vallès, Ferran
  • Palau, Anna|||0000-0002-2217-164X
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Ricart, Susagna
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
Solution deposited YBaCuO (YBCO) nanocomposites with preformed nanoparticles represent a promising cost-effective approach for superior critical current properties under applied magnetic fields. Nonetheless, the majority of YBCO nanocomposites with high nanoparticle loads (>20%) suffer from nanoparticle coalescence and degraded superconducting properties. Here, we study the influence of nanoparticle concentration (0-25% mol), size (5 nm-10 nm) and composition (BaHfO, BaZrO) on the generation of structural defects in the epitaxial YBCO matrix, key parameter for vortex pinning. We demonstrate that flash-heated superconducting nanocomposites with 20 mol% preformed BaHfO or BaZrO perovskite secondary phases feature discrete and small (7 nm) nanoparticles and high density of YBaCuO (Y248) intergrowths. We identify a synergy between Y248 intergrowth density and small nanoparticles to increase artificial vortex pinning centers. Also, we validate the multideposition process to successfully increase film thickness of epitaxial nanocomposites with competitive critical currents I at 77 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Real-space image of charged patches in tunable-size nanocrystals

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Pérez Rodríguez, Ana|||0000-0002-5778-0103
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Barrena, Esther|||0000-0001-9163-2959
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Ricart, Susagna
The remarkable dual nature of faceted-charge patchy metal fluoride nanocrystals arises from the spontaneous selective coordination of anionic and cationic ligands on the different facets of the nanocrystals. In previous studies, the identification and origin of the charge at the patches were obtained by combining computer simulations with indirect experimental evidence. Taking a step further, we report herein the first direct real-space identification by Kelvin probe force microscopy of the predicted faceted-charge patchy behavior, allowing the image of the dual faceted-charge surfaces. High-resolution transmission electron microscopy reveals the detailed nanocrystal faceting and allows unambiguously inferring the hydrophilic or hydrophobic role of each facet from the identification of the surface atoms exposed at the respective crystallographic planes. The success of the study lies in a foresighted synthesis methodology designed to tune the nanocrystal size to be suitable for microscopy studies and demanding applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid approach to obtain high-quality BaMO perovskite nanocrystals

  • Chamorro, Natalia|||0000-0002-9531-1869
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported. This new synthetic methodology sets a whole general route to successfully tune the sizes of high-quality BaMO (M = Ti 4+, Zr 4+, and Hf 4+) perovskite nanocrystals. Purely cubic-phase nanocrystals (stable in alcohol media) were obtained using controlled water amounts, combining the well-known aqueous sol-gel process with the classic solvothermal method. Exhaustive optimizations revealed feasibility of a fast (1 hour) and reproducible synthesis with small variations in the crystal size or agglomeration parameters. The study also reveals water content as the pivotal factor to achieve this wide range of sizes through a controlled hydrolytic step. Finally, the study of the hydrolytic process made it possible to shed some light on mechanistic insights of this synthetic route. A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported.