Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 91
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Electron energy-loss spectroscopic tomography of FexCo(3-x)O4 impregnated Co3O4 mesoporous particles: unraveling the chemical information in three dimensions

  • Yedra Cardona, Lluís
  • Eljarrat Ascunce, Alberto
  • Arenal, Raúl
  • López Conesa, Lluís
  • Pellicer Vilà, Eva M. (Eva Maria)
  • López-Ortega, Alberto
  • Estrader i Bofarull, Marta
  • Sort, Jordi
  • Baró, M. D.
  • Estradé Albiol, Sònia
  • Peiró Martínez, Francisca
Electron energy-loss spectroscopy-spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FexCo(3-x)O4/Co3O4 ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Tailoring Staircase-like Hysteresis Loops in Electrodeposited Tri-segmented Magnetic Nanowires: a Strategy toward Minimization of Interwire Interactions

  • Zhang, Jin
  • Agramunt Puig, Sebastià
  • Valle, Núria del
  • Navau Ros, Carles
  • Baró, M. D.
  • Estradé Albiol, Sònia
  • Peiró Martínez, Francisca
  • Pané, Salvador
  • Nelson, Bradley J.
  • Sanchez, Alvaro
  • Nogués, Josep
  • Pellicer Vilà, Eva M. (Eva Maria)
  • Sort, Jordi
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Magnetically-actuated mesoporous nanowires for enhanced heterogeneous catalysis

  • Serrà i Ramos, Albert
  • Grau, Sergi
  • Gimbert-Suriñach, Carolina
  • Sort, Jordi
  • Nogués, Josep
  • Vallés Giménez, Elisa
We study the optimization of the catalytic properties of entirely magnetic CoPt compact and mesoporous nanowires of different diameters (25 - 200 nm). The nanowires are a single-entity magnetic-catalyst with a huge catalytically-active surface area, making them robust and easy to fabricate. We show that apart from the size and morphology of the nanowires, other factors can be optimized to enhance the catalytic activity of the nanowires. In particular, given the magnetic character of the nanowires, rotating magnetic fields are a very powerful approach to improve the performance of the catalyst by acting as nano-stirrers, improving the local flow of material towards the active sites of the catalyst. We demonstrate the versatility of the procedure by optimizing (i) the degradation of different types of pollutants (4-nitrophenol and methylene blue) and (ii) hydrogen production. For example, by using 25 nm wide CoPt mesoporous nanowires as catalysts, kinetic normalized constants knor as high as 20667 and 21750 s-1g-1 for 4-nitrophenol and methylene blue reduction, respectively, are obtained, and activity values for hydrogen production from borohydride are as high as 25.0 L H2 g-1 min-1, even at room temperature. These values outperform any current state-of-the-art proposed catalysis strategies for water remediation reactions by at least 10-times and are superior to most advanced approaches to generate hydrogen from borohydride. The recyclability of the nanowires together with the simplicity of the synthetic method makes this approach (using not only CoPt but also other mesoporous magnetic catalysts) very appealing for very diverse types of catalytic applications.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Highly efficient electrochemical and chemical hydrogenation of 4-nitrophenol using recyclable narrow mesoporous magnetic CoPt nanowires

  • Serrà i Ramos, Albert
  • Alcobé i Ollé, Xavier
  • Sort, Jordi
  • Nogués, Josep
  • Vallés Giménez, Elisa
Toxic nitro-compounds, such as 4-nitrophenol, are one of the most common wastewater industrial pollutants. Thus, efficient ways to neutralize them are actively pursued. Here novel procedures to degrade these types of compounds based on the use of mesoporous magnetic nanowires are demonstrated. Fully-mesoporous magnetic narrow (25 nm) CoPt nanowires with an extraordinary effective area are grown using ionic liquid-in-water microemulsions in alumina templates. These mesoporous nanowires are shown to be efficient catalysts for the hydrogenation of 4-nitrophenol by electrocatalysis. Additionally, these nanowires also present exceptional conventional catalytic activity when used in conjunction with NaBH4, particularly when magnetic stirring is utilized. In fact, magnetically actuated mesoporous CoPt nanowires drastically outperform all state-of-the-art 4-nitrophenol catalysts. Additionally, given their magnetic character, these nanowires can be easily recycled and reused. Thus, the outstanding catalytic performance of mesoporous CoPt nanowires makes them excellent candidates for wastewater treatment agents.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformal oxide nanocoatings on electrodeposited 3D porous Ni films by atomic layer deposition

  • Zhang, J.
  • Coll, Mariona
  • Puig Molina, Teresa
  • Pellicer, Eva
  • Sort, Jordi
A versatile chemical synthesis procedure to obtain Al2O3 and Co2FeO4 nanolayers conformally coating a three-dimensional (3D) porous Ni film is presented. First, porous Ni is grown by hydrogen bubble template-assisted electrodeposition. Subsequently, Al2O3 and Co2FeO4 layers, with thickness ranging from 5 nm to 25 nm, are directly deposited onto the pore walls by atomic layer deposition, while maintaining the porous architecture and magnetic properties of the Ni scaffold. The crystal structure, thickness and distribution of elements within the composite coatings are investigated in detail. The resulting magnetic and wettability properties are assessed. Contact angle tests reveal that 3D porous Ni films become more hydrophilic after coating with Al2O3 or Co2FeO4. From a technological point of view, the obtained composite porous films could be appealing for application in magnetically actuated micro/nano-electromechanical systems (MEMS/NEMS) or bio-MEMS/NEMS, among others., This work has been partially funded by the 2014-SGR-1015 and 2014-SGR-150 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R and MAT2014-51778-C2-1-R projects from the Spanish Ministerio de Economı´a y Competitividad (MINECO) and associated FEDER, and the SPIN-PORICS 2014- Consolidator Grant from the European Research Council (Grant Agreement 648454). J. Z. is grateful to the China Scholarship Council (CSC) for the PhD grant. E. P. and M. C. are grateful to MINECO for the ‘‘Ramon y Cajal’’ contract (RYC-2012-10839, RYC-2013-12448). ICMAB acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electric-Field-Adjustable Time-Dependent Magnetoelectric Response in Martensitic FeRh Alloy

  • Fina, Ignasi
  • Quintana, Alberto
  • Padilla-Pantoja, Jessica
  • Martí, Xavier
  • Macià, Ferran
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Fontcuberta, Josep
  • Sort, Jordi
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic−ferromagnetic phases in FeRh, unbalanced by voltagecontrolled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015- 73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, MAT2015-64110-C2-2-P, and associated FEDER], the Generalitat de Catalunya (2014-SGR-734, 2014-SGR-1015) and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from the EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. Jose Santiso and Jose Manuel Caicedo Roque from Institut Català de Nanociència i Nanotecnologia are acknowledged for valuable collaboration on time-dependent X-ray characterization. We also acknowledge Max Stengel and Umesh Bhaskar for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hidden Magnetic States Emergent Under Electric Field, In A Room Temperature Composite Magnetoelectric Multiferroic

  • Clarkson, J. D.
  • Fina, Ignasi
  • Frontera, Carlos
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Ramesh, Ramamoorthy
Clarkson, J. D. et al., The ability to control a magnetic phase with an electric field is of great current interest for a variety of low power electronics in which the magnetic state is used either for information storage or logic operations. Over the past several years, there has been a considerable amount of research on pathways to control the direction of magnetization with an electric field. More recently, an alternative pathway involving the change of the magnetic state (ferromagnet to antiferromagnet) has been proposed. In this paper, we demonstrate electric field control of the Anomalous Hall Transport in a metamagnetic FeRh thin film, accompanying an antiferromagnet (AFM) to ferromagnet (FM) phase transition. This approach provides us with a pathway to “hide” or “reveal” a given ferromagnetic region at zero magnetic field. By converting the AFM phase into the FM phase, the stray field, and hence sensitivity to external fields, is decreased or eliminated. Using detailed structural analyses of FeRh films of varying crystalline quality and chemical order, we relate the direct nanoscale origins of this memory effect to site disorder as well as variations of the net magnetic anisotropy of FM nuclei. Our work opens pathways toward a new generation of antiferromagnetic – ferromagnetic interactions for spintronics., Te work at Berkeley was supported in part by FAME, one of six centers of STARnet, a Semiconductor Research Corporation program sponsored by MARCO and DARPA was supported by the SRC-FAME program. Financial support by the Spanish Government (Project MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2017- 85232-R and associated FEDER) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. ICMAB-CSIC authors acknowledge fnancial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government. XMCD-PEEM experiments were performed at CIRCE beamline at ALBA Synchrotron with the acknowledged collaboration of ALBA staf. Partial fnancial support from the 2014-Consolidator Grant "SPIN-PORICS" (Grant Agreement nº 648454) from the European Research Council is acknowledged. XM acknowledges support from the Grant Agency of the Czech Republic Grant no. 14-37427. Work at ORNL was sponsored by the Laboratory Directed Research and Development (LDRD) Programs of ORNL managed by UT-Battelle, LLC. Work at CSUN was supported by NSF under Grant No. 1205734, NSF Partnerships for Research and Education in Materials (PREM), and by NSF under Grant No. 1160504 NSF Nanosystems Engineering Research Center for Translational Applications of Nanoscale Multiferroic Systems (TANMS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly efficient electrochemical and chemical hydrogenation of 4-nitrophenol using recyclable narrow mesoporous magnetic CoPt nanowires

  • Serrà, Albert
  • Alcobé, Xavier
  • Sort, Jordi
  • Nogués, Josep
  • Vallés, Elisa
Toxic nitro-compounds, such as 4-nitrophenol, are one of the most common wastewater industrial pollutants. Thus, efficient ways to neutralize them are actively pursued. Here novel procedures to degrade these types of compounds based on the use of mesoporous magnetic nanowires are demonstrated. Fully-mesoporous magnetic narrow (25 nm) CoPt nanowires with an extraordinary effective area are grown using ionic liquid-in-water microemulsions in alumina templates. These mesoporous nanowires are shown to be efficient catalysts for the hydrogenation of 4-nitrophenol by electrocatalysis. Additionally, these nanowires also present exceptional conventional catalytic activity when used in conjunction with NaBH, particularly when magnetic stirring is utilized. In fact, magnetically actuated mesoporous CoPt nanowires drastically outperform all state-of-the-art 4-nitrophenol catalysts. Additionally, given their magnetic character, these nanowires can be easily recycled and reused. Thus, the outstanding catalytic performance of mesoporous CoPt nanowires makes them excellent candidates for wastewater treatment agents., This work was supported by the EU ERDF (FEDER) fund and the Spanish Government grants TEC2014-51940-C2-2-R and MAT2014-57960-C3-1-R from Ministerio de Economía y Competitividad (MINECO) –the latter cofinanced by FEDER. Partial funding from the European Research Council (Consolidator Grant, project n. 648454, SPIN-PORICS) and the Generalitat de Catalunya (2014-SGR-1015 project) is acknowledged. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling the collective magnetic behavior of highly-packed arrays of multi-segmented nanowires

  • Agramunt-Puig, S.
  • Pellicer, Eva
  • Nogués, Josep
  • Sánchez, Álvaro
  • Sort, Jordi
et al., A powerful model to evaluate the collective magnetic response of large arrays of segmented nanowires comprising two magnetic segments of dissimilar coercivity separated by a non-magnetic spacer is introduced. The model captures the essential aspects of the underlying physics in these systems while being at the same time computationally tractable for relatively large arrays. The minimum lateral and vertical distances rendering densely packed weakly-interacting nanowires and segments are calculated for optimizing their performance in applications like magnetic sensors or recording media. The obtained results are appealing for the design of multifunctional miniaturized devices actuated by external magnetic fields, whose successful implementation relies on achieving a delicate balance between two opposing technological demands: the need for an ultra-high density of nanowires per unit area and the minimization of inter-wire and inter-segment dipolar interactions., We acknowledge the support from the 2014-SGR-1015 and 2014-SGR-150 projects of the Generalitat de Catalunya, the MAT2012-35370 and MAT2014-57960-C3-1-R projects from the Spanish Ministerio de Economía y Competitividad (MINECO)-the latter cofinanced by the ‘Fondo Europeo de Desarrollo Regional’ (FEDER)-, the SPIN-PORICS 2014-Consolidator Grant (Grant Agreement 648454) from the European Research Council (ERC), and the MANAQA project (grant agreement 296679) from the European Community’s Seventh Framework Programme (FET-Open/FP7/2007-2013). AS acknowledges funding from an ICREA Academia award. EP acknowledges the Spanish Ministerio de Economía y Competitividad (MINECO) for the ‘Ramon y Cajal’ contract (RYC-2012-10839). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring staircase-like hysteresis loops in electrodeposited trisegmented magnetic nanowires: a strategy toward minimization of interwire interactions

  • Zhang, Jin
  • Agramunt-Puig, S.
  • Baró, María Dolors
  • Estradé, Sònia
  • Peiró, Francesca
  • Pané, Salvador
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance., This work has been partially funded by the 2014-SGR-1015, 2014-SGR-150, and 2014-PROD-00059 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R (cofunded by FEDER), MAT2012-35370, MAT2013-41506 and CSD2009-00013 projects from the Spanish Ministerio de Economia y Competitividad (MINECO), and the MANAQA FET-Open Project from the European Commission (FP7) under Grant Agreement 296679 and the ERC CoG 648454 SPIN-PORICS. J.Z. is grateful to the China Scholarship Council (CSC) for a Ph.D. grant. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (RYC-2012-10839). A.S. acknowledges a grant from ICREA Academia funded by the Generalitat de Catalunya. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrodeposited Ni-Based Magnetic Mesoporous Films as Smart Surfaces for Atomic Layer Deposition: An “All-Chemical” Deposition Approach toward 3D Nanoengineered Composite Layers

  • Zhang, Jin
  • Quintana, Alberto
  • Menéndez, Enric
  • Coll, Mariona
  • Pellicer, Eva
  • Sort, Jordi
Mesoporous Ni and Cu-Ni (Cu20Ni80 and Cu45Ni55 in at. %) films, showing a three-dimensional (3D) porous structure and tunable magnetic properties, are prepared by electrodeposition from aqueous surfactant solutions using micelles of P-123 triblock copolymer as structure-directing entities. Pores between 5 and 30 nm and dissimilar space arrangements (continuous interconnected networks, circular pores, corrugated mesophases) are obtained depending on the synthetic conditions. X-ray diffraction studies reveal that the Cu-Ni films have crystallized in the face-centered cubic structure, are textured, and exhibit certain degree of phase separation, particularly those with a higher Cu content. Atomic layer deposition (ALD) is used to conformally coat the mesopores of Cu20Ni80 film with amorphous Al2O3, rendering multiphase "nano-in-meso" metal-ceramic composites without compromising the ferromagnetic response of the metallic scaffold. From a technological viewpoint, these 3D nanoengineered composite films could be appealing for applications like magnetically actuated micro/nanoelectromechanical systems (MEMS/NEMS), voltage-driven magneto-electric devices, capacitors, or as protective coatings with superior strength and tribological performance., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement No 648454), the Spanish Government (Project MAT2017-86357-C3-1-R and associated FEDER) and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-292 and 2017-SGR-1519) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no 665919 is acknowledged. E.P. and M. C. are grateful to MINECO for the “Ramón y Cajal” contract (RYC-2012-10839 and RYC-2013-12448)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi
  • Quintana, Alberto
  • Martí, Xavier
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Sort, Jordi
  • Fontcuberta, Josep
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R, MAT2015-64110-C2-2-R and MAT2017-86357-C3-1-R, and associated FEDER], the Generalitat de Catalunya (2017-SGR-1377, 2017-SGR-292), and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV- 2015-0496). I.F. acknowledges Ramon y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coercivity modulation in Fe–Cu pseudo-ordered porous thin films controlled by an applied voltage: A sustainable, energy-efficient approach to magnetoelectrically driven materials

  • Dislaki, Evangelia
  • Robbennolt, Shauna
  • Campoy Quiles, Mariano
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
Fe–Cu films with pseudo‐ordered, hierarchical porosity are prepared by a simple, two‐step procedure that combines colloidal templating (using sub‐micrometer‐sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage‐driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface‐area‐to‐volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices., This work was supported by the SELECTA (No. 642642) H2020‐MSCA‐ITN‐2014 project. Partial financial support by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (Project Nos. MAT2017‐86357‐C3‐1‐R, MAT2015‐70850‐P and associated FEDER), the Generalitat de Catalunya (2017‐SGR‐292), and the European Research Council (SPIN‐PORICS and FOREMAT, with Agreement Nos. 648454 and 648901, respectively) is acknowledged. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (RYC‐2012‐10839). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of MINECO, grant no. SEV‐2013‐0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large magnetoelectric effects in electrodeposited nanoporous microdisks driven by effective surface charging and magneto-ionics

  • Navarro-Senent, Cristina
  • Fornell, Jordina
  • Isarain-Chávez, Eloy
  • Quintana, Alberto
  • Menéndez, Enric
  • Foerster, Michael
  • Aballe, Lucía
  • Weschke, Eugen
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
A synergetic approach to enhance magnetoelectric effects (i.e., control of magnetism with voltage) and improve energy efficiency in magnetically actuated devices is presented. The investigated material consists of an ordered array of Co–Pt microdisks, in which nanoporosity and partial oxidation are introduced during the synthetic procedure to synergetically boost the effects of electric field. The microdisks are grown by electrodeposition from an electrolyte containing an amphiphilic polymeric surfactant. The bath formulation is designed to favor the incorporation of oxygen in the form of cobalt oxide. A pronounced reduction of coercivity (88%) and a remarkable increase of Kerr signal amplitude (60%) are observed at room temperature upon subjecting the microdisks to negative voltages through an electrical double layer. These large voltage-induced changes in the magnetic properties of the microdisks are due to (i) the high surface-area-to-volume ratio with ultranarrow pore walls (sub-10 nm) that promote enhanced electric charge accumulation and (ii) magneto-ionic effects, where voltage-driven O2– migration promotes a partial reduction of CoO to Co at room temperature. This simple and versatile procedure to fabricate patterned “nano-in-micro” magnetic motifs with adjustable voltage-driven magnetic properties is very appealing for energy-efficient magnetic recording systems and other magnetoelectronic devices., This work was funded by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant (Agreement No. 648454), the Generalitat de Catalunya (2017-SGR292 project), the Spanish Government (MAT2017-86357-C3-1-R, MAT2014-57960-C3-1-R, and associated FEDER projects), and the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 665919. J.F. and E.P. acknowledge the Juan de la Cierva (IJCI-2015-27030) and Ramon y Cajal (RYC-2012-10839) fellowships, respectively, from MINECO. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. ICN2 also acknowledges the support from the Severo Ochoa Program (MINECO, grant SEV-2013-0295), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetically amplified photothermal therapies and multimodal imaging with magneto-plasmonic nanodomes

  • Li, Zhi
  • Aranda-Ramos, Antonio
  • Güell-Grau, Pau
  • Tajada Herráiz, José Luis
  • Pou-Macayo, Laia
  • Lope-Piedrafita, Silvia
  • Pi, Francesc
  • Roca, Alejandro G.
  • Baró, María Dolors
  • Sort, Jordi
  • Nogués, Carme
  • Sepúlveda, Borja
Nanotherapies require new ways for controlling and improving the delivery of the therapeutic agents to the site of action to maximize their efficacy and minimize the side effects. This control is particularly relevant in photothermal treatments to reduce the required light intensity and amount of injected nanoparticles, and to minimize necrotic cell deaths. Here we present a novel concept for multifunctional nanobiomedical agents: magneto-plasmonic (MP) nanodomes for magnetically guided and amplified photothermal therapies and as contrast agents for multimodal imaging. The MP nanodomes are composed of a Fe/Au bilayer semi-shell deposited on a 100 nm diameter fluorescent polystyrene nanosphere, which gather a unique combination of straightforward functionalization, high colloidal stability, very strong ferromagnetic behavior and intense optical absorption efficiency in the near infrared. We show that the photothermal conversion efficiency of the Fe/Au nanodomes with high Fe ratios is substantially larger than pure plasmonic Au nanodomes and the state-of-art plasmonic nanoheaters, i.e. Au nanorods and nanoshells, by merging strong optical absorption, minimized scattering and low optical anisotropy. Remarkably, the effective magnetophoretic concentration of the Fe/Au nanodomes at the illumination region enables large local increase of the optically induced temperature rise. The Fe semishell also provides very intense T2 contrast in nuclear magnetic resonance, which is at least 15-fold larger per particle than commercial iron oxide contrast agents. Moreover, the fluorescent polystyrene nanosphere and the Au semishell integrate valuable fluorescent and X-ray contrasts, respectively, which we have used to assess the nanodomes internalization by cancer cells. The MP nanodomes are nontoxic to cells even in the case of magnetophoretic local enrichment with initially high particle concentration (100 μg/mL). Remarkably, we demonstrate amplified local photothermal treatments by the magnetic enrichment of the nanodomes at the illumination region, which enables reaching nearly 100% reduction of cell viability with low particle concentration (10 μg/mL) and mild NIR laser intensity (5 W/cm2). These results highlight the high potential of MP nanodomes for magnetically guided and amplified photothermal therapies., This work is supported by Spanish Ministry of Economy, Industry and Competitiveness (MINECO) and European Regional Development Fund (FEDER) (Projects number: MAT2013-48628-R, MAT2016-77391-R, MAT2017-86357-C3-1-R and MAT2017-86357-C3-3-R). Generalitat de Catalunya (2017-SGR-292) is acknowledged. ICN2 is funded by the Centres de Recerca de Catalunya (CERCA) Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Zhi Li acknowledges the Chinese Scholarship Council Program (201506950059) for financial support. Jordi Sort acknowledges the financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement N° 648454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simultaneous local heating/thermometry based on plasmonic magnetochromic nanoheaters

  • Li, Zhi
  • López-Ortega, Alberto
  • Aranda-Ramos, Antonio
  • Tajada Herráiz, José Luis
  • Sort, Jordi
  • Nogués, Carme
  • Vavassori, Paolo
  • Nogués, Josep
  • Sepúlveda, Borja
A crucial challenge in nanotherapies is achieving accurate and real‐time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic‐induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60‐fold smaller than state‐of‐the‐art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real‐time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state‐of‐the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology., This work was supported by the Spanish Ministry of Economy, Industry and Competitivenes (MINECO) projects MAT2013‐48628‐R, MAT2016‐77391‐R, and PCIN‐2016‐093 (H2020 M‐ERA.NET). Z.L. acknowledges the Chinese Scholarship Council (CSC) Program (201506950059) for financial support. The 2017‐SGR‐292 project of the Generalitat de Catalunya is acknowledged. The ICN2 was funded by the Centres de Recerca de Catalunya (CERCA) programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa programme (MINECO, No. SEV‐2013‐0295). A.L.‐O. and P.V. acknowledge funding from the Basque Government (No. PI2015_1_19), MINECO and the European Regional Development Fund (FEDER) (No. FIS2015 64519 R). A.L.‐O. acknowledges the support from Juan de la Cierva grant. This work was also supported by MINECO under the Maria de Maeztu Units of Excellence (MDM‐2016‐0618). J.S. acknowledges the financial support by the European Research Council (SPIN‐PORICS 2014‐Consolidator Grant, Agreement No. 648454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable magnetism in nanoporous CuNi alloys by reversible voltage‐driven element‐selective redox processes

  • Quintana, Alberto
  • Menéndez, Enric
  • Isarain-Chávez, Eloy
  • Fornell, Jordina
  • Solsona, Pau
  • Fauth, François
  • Baró, María Dolors
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
Voltage-driven manipulation of magnetism in electrodeposited 200 nm thick nanoporous single-phase solid solution Cu20 Ni80 (at%) alloy films (with sub 10 nm pore size) is accomplished by controlled reduction-oxidation (i.e., redox) processes in a protic solvent, namely 1 m NaOH aqueous solution. Owing to the selectivity of the electrochemical processes, the oxidation of the CuNi film mainly occurs on the Cu counterpart of the solid solution, resulting in a Ni-enriched alloy. As a consequence, the magnetic moment at saturation significantly increases (up to 33% enhancement with respect to the as-prepared sample), while only slight changes in coercivity are observed. Conversely, the reduction process brings Cu back to its metallic state and, remarkably, it becomes alloyed to Ni again. The reported phenomenon is fully reversible, thus allowing for the precise adjustment of the magnetic properties of this system through the sign and amplitude of the applied voltage., The financial support by the European Research Council (SPINPORICS 2014-Consolidator Grant, Agreement No. 648454), the Spanish Government (Projects MAT2017-86357-C3-1-R, MAT2014-57960-C3-1-R and associated FEDER), the Generalitat de Catalunya (2017-SGR-292), and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. E.P. is grateful to MINECO for the “Ramón y Cajal” contract (RYC-2012-10839). The authors are also indebted to the National Council on Science and Technology in Mexico (CONACYT) for the postdoctoral grant (274347) given to E.I.-C. J.F. acknowledges the Juan de la Cierva Fellowship from MINECO (Grant no. IJCI-2015-27030). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. ICN2 also acknowledges the support from the Severo Ochoa Program (MINECO, Grant no. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage-controlled ON-OFF ferromagnetism at room temperature in a single metal oxide film

  • Quintana, Alberto
  • Menéndez, Enric
  • Liedke, Maciej O.
  • Butterling, Maik
  • Wagner, Andreas
  • Sireus, Veronica
  • Torruella, Pau
  • Estradé, Sònia
  • Peiró, Francesca
  • Dendooven, Jolien
  • Detavernier, Christophe
  • Murray, Peyton D.
  • Gilbert, Dustin A.
  • Liu, Kai
  • Pellicer, Eva
  • Nogués, Josep
  • Sort, Jordi
Electric-field-controlled magnetism can boost energy efficiency in widespread applications. However, technologically, this effect is facing important challenges: mechanical failure in strain-mediated piezoelectric/magnetostrictive devices, dearth of room-temperature multiferroics, or stringent thickness limitations in electrically charged metallic films. Voltage-driven ionic motion (magneto-ionics) circumvents most of these drawbacks while exhibiting interesting magnetoelectric phenomena. Nevertheless, magneto-ionics typically requires heat treatments and multicomponent heterostructures. Here we report on the electrolyte-gated and defect-mediated O and Co transport in a Co3O4 single layer which allows for room-temperature voltage-controlled ON-OFF ferromagnetism (magnetic switch) via internal reduction/oxidation processes. Negative voltages partially reduce Co3O4 to Co (ferromagnetism: ON), resulting in graded films including Co- and O-rich areas. Positive bias oxidizes Co back to Co3O4 (paramagnetism: OFF). This electric-field-induced atomic-scale reconfiguration process is compositionally, structurally, and magnetically reversible and self-sustained, since no oxygen source other than the Co3O4 itself is required. This process could lead to electric-field-controlled device concepts for spintronics., Financial support by the European Research Council (SPINPORICS 2014-Consolidator Grant, Agreement No. 648454), the Spanish Government (Projects MAT2017-86357-C3-1-R and associated FEDER), the Generalitat de Catalunya (2017-SGR-292) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 665919 is acknowledged. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (RYC-2012-10839). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. ICN2 also acknowledges the support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Work at UCD is supported by the US NSF (DMR1610060 and ECCS-1611424)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling Highly Asymmetric Magnetoelectric Effects in Engineered Multiferroic Heterostructures

  • Menéndez, Enric
  • Sireus, Veronica
  • Quintana, Alberto
  • Fina, Ignasi
  • Casals, Blai
  • Cichelero, Rafael
  • Kataja, Mikko
  • Stengel, Massimiliano
  • Herranz, Gervasi
  • Catalán, Gustau
  • Baró, María Dolors
  • Suriñach, Santiago
  • Sort, Jordi
One of the main strategies to control magnetism by voltage is the use of magnetostrictive-piezoelectric hybrid materials, such as ferromagnetic-ferroelectric heterostructures. When such heterostructures are subjected to an electric field, piezostrain-mediated effects, electronic charging, and voltage-driven oxygen migration (magnetoionics) may simultaneously occur, making the interpretation of the magnetoelectric effects not straightforward and often leading to misconceptions. Typically, the strain-mediated magnetoelectric response is symmetric with respect to the sign of the applied voltage because the induced strain (and variations in the magnetization) depends on the square of the ferroelectric polarization. Conversely, asymmetric responses can be obtained from electronic charging and voltage-driven oxygen migration. By engineering a ferromagnetic-ferroelectric hybrid consisting of a magnetically soft 50-nm thick Fe 75 Al 25 (at. %) thin film on top of a 〈110〉-oriented Pb ( Mg 1 / 3 Nb 2 / 3 ) O 3 - 32 Pb Ti O 3 ferroelectric crystal, a highly asymmetric magnetoelectric response is obtained and the aforementioned magnetoelectric effects can be disentangled. Specifically, the large thickness of the Fe 75 Al 25 layer allows dismissing any possible charge accumulation effect, whereas no evidence of magnetoionics is observed experimentally, as expected from the high resistance to oxidation of Fe 75 Al 25 , leaving strain as the only mechanism to modulate the asymmetric magnetoelectric response. The origin of this asymmetric strain-induced magnetoelectric effect arises from the asymmetry of the polarization reversal in the particular crystallographic orientation of the ferroelectric substrate. These results are important to optimize the performance of artificial multiferroic heterostructures., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible, Electric-Field Induced Magneto-Ionic Control of Magnetism in Mesoporous Cobalt Ferrite Thin Films

  • Robbennolt, Shauna
  • Menéndez, Enric
  • Quintana, Alberto
  • Gómez Rodríguez, Andrés
  • Aufret, Stéphane
  • Baltz, Vincent
  • Pellicer, Eva
  • Sort, Jordi
The magnetic properties of mesoporous cobalt ferrite films can be largely tuned by the application of an electric field using a liquid dielectric electrolyte. By applying a negative voltage, the cobalt ferrite becomes reduced, leading to an increase in saturation magnetization of 15% (MS) and reduction in coercivity (HC) between 5–28%, depending on the voltage applied (−10 V to −50 V). These changes are mainly non-volatile so after removal of −10 V MS remains 12% higher (and HC 5% smaller) than the pristine sample. All changes can then be reversed with a positive voltage to recover the initial properties even after the application of −50 V. Similar studies were done on analogous films without induced porosity and the effects were much smaller, underscoring the importance of nanoporosity in our system. The different mechanisms possibly responsible for the observed effects are discussed and we conclude that our observations are compatible with voltage-driven oxygen migration (i.e., the magneto-ionic effect)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing Magneto-Ionic Effects in Magnetic Nanostructured Films via Conformal Deposition of Nanolayers with Oxygen Acceptor/Donor Capabilities

  • Navarro Senent, Cristina
  • Quintana, Alberto
  • Isarain-Chávez, Eloy
  • Weschke, Eugen
  • Yu, Penmgei
  • Coll, Mariona
  • Pellicer, Eva
  • Menéndez, Enric
  • Sort, Jordi
Effective manipulation of the magnetic properties of nanostructured metallic alloys, exhibiting intergrain porosity (i.e., channels) and conformally coated with insulating oxide nanolayers, with an electric field is demonstrated. Nanostructured Co–Pt films are grown by electrodeposition (ED) and subsequently coated with either AlOx or HfOx by atomic layer deposition (ALD) to promote magneto-ionic effects (i.e., voltage-driven ion migration) during electrolyte gating. Pronounced variations in coercivity (HC) and magnetic moment at saturation (mS) are found at room temperature after biasing the heterostructures. The application of a negative voltage results in a decrease of HC and an increase of mS, whereas the opposite trend is achieved for positive voltages. Although magneto-ionic phenomena are already observed in uncoated Co–Pt films (because of the inherent presence of oxygen), the ALD oxide nanocoatings serve to drastically enhance the magneto-ionic effects because of partially reversible oxygen migration, driven by voltage, across the interface between AlOx or HfOx and the nanostructured Co–Pt film. Co–Pt/HfOx heterostructures exhibit the most significant magneto-electric response at negative voltages, with an increase of mS up to 76% and a decrease of HC by 58%. The combination of a nanostructured magnetic alloy and a skinlike insulating oxide nanocoating is shown to be appealing to enhance magneto-ionic effects, potentially enabling electrolyte-gated magneto-ionic technology., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, agreement no. 648454), the Spanish Government (Project MAT2017-86357-C3-1-R, MAT2017-83169-R “Severo Ochoa” Programme for Centres of Excellence in R&D SEV-2015-0496 and associated FEDER), the Generalitat de Catalunya (2017-SGR-292 and 2017-SGR-1519), and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. P.Y. acknowledges the Chinese Scholarship Council CSC fellowship (201606920073)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-ionic control of magnetism in two-oxide nanocomposite thin films comprising mesoporous cobalt ferrite conformally nanocoated with HfO2

  • Robbennolt, Shauna
  • Yu, Penmgei
  • Nicolenco, Aliona
  • Fernandez, Pau Mercier
  • Coll, Mariona
  • Sort, Jordi
Advances in nanotechnology require of robust methods to fabricate new types of nanostructured materials whose properties can be controlled at will using simple procedures. Nanoscale composites can benefit from actuation protocols that involve mutual interfacial interactions on the nanoscale. Herein, a method to create nanoscale composite thin films consisting of mesoporous cobalt ferrite (CFO) whose pore walls are nanocoated with HfO2 is presented. Porous CFO films are first prepared by sol–gel. Atomic layer deposition is subsequently used to conformally grow a HfO2 layer at the surface of the pore walls, throughout the thickness of the films. The magnetic properties of uncoated and HfO2-coated CFO mesoporous films are then modulated by applying external voltage, via magneto-ionic effects. The CFO–HfO2 composite films exhibit an enhanced magnetoelectric response. The magnetic moment at saturation of the composite increases 56% upon the application of −50 V (compared to 24% for CFO alone). Furthermore, dissimilar trends in coercivity are observed: after applying −50 V, the coercivity of the composite film increases by 69% while the coercivity of the CFO alone decreases by 25%. The effects can be reversed applying suitable positive voltages. This two-oxide nanocomposite material differs from archetypical magneto-ionic architectures, in which voltage-driven ion migration is induced between fully-metallic and oxide counterparts. The synthesized material is particularly appealing to develop new types of magnetoelectric devices with a highly tunable magnetic response., This work was supported by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454, and MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018, the Generalitat de Catalunya (2017-SGR-292, 2017-SGR-1519) and the Spanish Government (MAT2017-86357-C3-1-R, MAT 2017-83169-R associated FEDER). P.Y acknowledges China Scholarship Council for CSC fellowship No. 201606920073., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael
  • Menéndez, Enric
  • Coy, Emerson
  • Quintana, Alberto
  • Gómez Olivella, Carles
  • Esqué de los Ojos, Daniel
  • Vallcorba, Oriol
  • Frontera, Carlos
  • Aballe, Lucía
  • Nogués, Josep
  • Sort, Jordi
  • Fina, Ignasi
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (DT* B 20 8C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of predefined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices., Dr Patxi Lopez-Barbera is acknowledged for his assistance with the MOKE experiments. Vicente Garcia-Juez from Real Casa de la Moneda – Fabrica Nacional de Moneda y Timbre is acknowledged for his scientific advice. Dr Florencio Sa´nchez is acknowledged for the growth of the samples. Dr Bernat Bozzo is acknowledged for the electric transport characterization. ALBA synchrotron is acknowledged for the provision of beamtime at the MSPD (proposal number 2017092412) and CIRCE (proposal numbers 2017092462 and 2018022818) beamlines. Financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706) and the MAT2017-85232-R, RTI2018-095303-B-C53. MAT2014-56063-C2-1-R, MAT2017-86357-C3-1-R (and associated FEDER) and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2014 SGR 734 and 2017 SGR 292), AGAUR (2018 LLAV 00032 and 2019 LLAV 00050) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. This work was supported by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454 and the MAGICSWITCH 2019-Proof of Concept Grant, Agreement No. 875018. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. I. F. acknowledges his RyC contract RYC-2017-22531. E. C. acknowledges the partial financial support from the National Science Centre of Poland (NCN) by the PRELUDIUM project UMO-2015/17/N/ST5/01988 and the SONATA Project No. UMO-2016/23/D/ST3/02121., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting Room-Temperature Magneto-Ionics in a Non-Magnetic Oxide Semiconductor

  • Rojas, Julius de
  • Quintana, Alberto
  • Lopeandia Fernández, Aitor
  • Salguero, Joaquín
  • Costa Krämer, José Luis
  • Abad Muñoz, Llibertat
  • Liedke, Maciej O.
  • Butterling, Maik
  • Wagner, Andreas
  • Henderick, Lowie
  • Dendooven, Jolien
  • Detavernier, Christophe
  • Sort, Jordi
  • Menéndez, Enric
Voltage control of magnetism through electric field-induced oxygen motion (magneto-ionics) could represent a significant breakthrough in the pursuit for new strategies to enhance energy efficiency in magnetically actuated devices. Boosting the induced changes in magnetization, magneto-ionic rates and cyclability continue to be key challenges to turn magneto-ionics into real applications. Here, it is demonstrated that room-temperature magneto-ionic effects in electrolyte-gated paramagnetic CoO films can be largely increased both in terms of generated magnetization (6 times larger) and speed (35 times faster) if the electric field is applied using an electrochemical capacitor configuration (utilizing an underlying conducting buffer layer) instead of placing the electric contacts at the side of the semiconductor (electric-double-layer transistor-like configuration). This is due to the greater uniformity and strength of the electric field in the capacitor design. These results are appealing to widen the use of ion migration in technological applications such as neuromorphic computing or iontronics in general., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement N° 648454), the Spanish Government (MAT2017-86357-C3-1-R), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032), and the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032) is acknowledged. This work was partially supported by the Impulse-und Net-working fund of the Helmholtz Association (FKZ VH-VI-442 Memriox), and the Helmholtz Energy Materials Characterization Platform (03ET7015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain gradient mediated magnetoelectricity in Fe-Ga/P(VDF-TrFE) multiferroic bilayers integrated on silicon

  • Nicolenco, Aliona
  • Gómez Rodríguez, Andrés
  • Chen, Xiang-Zhong
  • Menéndez, Enric
  • Fornell, Jordina
  • Pané, Salvador
  • Pellicer, Eva
  • Sort, Jordi
The primary advantage of magnetoelectric heterostructures exhibiting direct magnetoelectric effect is the possibility to induce and modulate the electrical response of the ferroelectric phase directly with an external magnetic field (i.e., wirelessly, without applying electric field). Nevertheless, the magnetoelectric coupling in such heterostructures is commonly limited by substrate clamping which hinders effective strain propagation. In this work, 1 μm thick ferromagnetic Fe-Ga layers were electrodeposited onto rigid Si/Cu substrates and subsequently coated with ferroelectric P(VDF-TrFE). Under magnetic field, the (110) textured Fe-Ga alloy is compressed along the z-direction by 0.033%, as demonstrated by X-ray diffraction. The experimental results suggest that while the bottom of the Fe-Ga layer is clamped, its air side exhibits a pronounced tetragonal deformation thanks to the residual nanoporosity existing between the columnar grains, that is, a strain gradient develops across the thickness of the Fe-Ga film. This strain gradient in Fe-Ga induces a change in the piezoresponse of the adjacent ferroelectric P(VDF-TrFE) layer. These results pave the way to the design of high-performance microelectromechanical systems (MEMS) with magnetoelectric response integrated on rigid substrates., This work was supported by the Spanish Government (MAT2017-86357-C3-1-R and associated FEDER), the Generalitat de Catalunya (2017-SGR-292), the European Research Council (ERC) under the SPIN-PORICS 2014-Consolidator Grant (Agreement № 648454) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement nº 665919. Authors also acknowledge networking support by COST Action MP1407-STSM grant COST-STSM-MP1407-43917. J.F. acknowledges the “Juan de la Cierva” (IJCI-2015-27030) contract by the Spanish Government. S.P. acknowledges support from the ERC-2017-CoG HINBOTS Grant No. 771565., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage-induced coercivity reduction in nanoporous alloy films: A boost toward energy-efficient magnetic actuation

  • Quintana, Alberto
  • Zhang, Jin
  • Isarain-Chávez, Eloy
  • Menéndez, Enric
  • Cuadrado, Ramón
  • Robles, Roberto
  • Baró, María Dolors
  • Guerrero, Miguel
  • Pané, Salvador
  • Nelson, Bradley J.
  • Müller, Carlos María
  • Ordejón, Pablo
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
Magnetic data storage and magnetically actuated devices are conventionally controlled by magnetic fields generated using electric currents. This involves significant power dissipation by Joule heating effect. To optimize energy efficiency, manipulation of magnetic information with lower magnetic fields (i.e., lower electric currents) is desirable. This can be accomplished by reducing the coercivity of the actuated material. Here, a drastic reduction of coercivity is observed at room temperature in thick (≈600 nm), nanoporous, electrodeposited Cu–Ni films by simply subjecting them to the action of an electric field. The effect is due to voltage-induced changes in the magnetic anisotropy. The large surface-area-to-volume ratio and the ultranarrow pore walls of the system allow the whole film, and not only the topmost surface, to effectively contribute to the observed magnetoelectric effect. This waives the stringent “ultrathin-film requirement” from previous studies, where small voltage-driven coercivity variations were reported. This observation expands the already wide range of applications of nanoporous materials (hitherto in areas like energy storage or catalysis) and it opens new paradigms in the fields of spintronics, computation, and magnetic actuation in general., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454), the Spanish Government (Project Nos. MAT2014-57960-C3-1-R and FIS2015-64886-C5-3-P and associated FEDER) and the Generalitat de Catalunya (Nos. 2014-SGR-1015 and 2014-SGR-301) is acknowledged. E.M. acknowledges the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant Agreement No. 665919. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (No. RYC-2012-10839). E.I.-C. acknowledges the grant awarded by the National Council on Science and Technology in Mexico (CONACYT). R.C., R.R., and P.O. acknowledge support from EU H2020-EINFRA-5-2015 MaX Center of Excellence (Grant 676598). The authors would also like to acknowledge networking support by the COST Action e-MINDS MP1407. ICN2 acknowledges the support from the Severo Ochoa Program (MINECO, Grant No. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical Role of Electrical Resistivity in Magnetoionics

  • Rojas, Julius de
  • Salguero, Joaquín
  • Quintana, Alberto
  • Lopeandía, Aitor
  • Liedke, Maciej O.
  • Butterling, Maik
  • Attallah, Ahmed G.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Abad Muñoz, Llibertat
  • Costa Krämer, José Luis
  • Sort, Jordi
  • Menéndez, Enric
The utility of electrical resistivity as an indicator of magnetoionic performance in stoichiometrically and structurally similar thin-film systems is demonstrated. A series of highly nanocrystalline cobalt nitride (Co-N) thin films (85 nm thick) with a broad range of electrical properties exhibit markedly different magnetoionic behaviors. Semiconducting, near stoichiometric CoN films show the best performance, better than their metallic and insulating counterparts. Resistivity reflects the interplay between atomic bonding, carrier localization, and structural defects, and in turn determines the strength and distribution of applied electric fields inside the actuated films. This fact, generally overlooked, reveals that resistivity can be used to quickly evaluate the potential of a system to exhibit optimal magnetoionic effects, while also opening interesting challenges., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454, and the MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the Spanish Government (MAT2017-86357-C3-1-R and PID2020- 116844RB-C21), the Generalitat de Catalunya (2017- SGR-292 and 2018-LLAV-00032) and the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032) is acknowledged. This work was partially supported by the Impulse-und Net-working fund of the Helmholtz Association (FKZ VH-VI-442 Memriox), and the Helmholtz Energy Materials Characterization Platform (03ET7015). The PALS measurements were carried out at ELBE at the Helmholtz-Zentrum DresdenRossendorf e. V., a member of the Helmholtz Association. L.A. thanks MINECO for a Ramón y Cajal Contract (RYC-2013-12640). J.S. thanks the Spanish Fábrica Nacional de Moneda y Timbre for fruitful discussions. E.M. acknowledges support as a Serra Húnter Fellow. We acknowledge service from MiNa Laboratory at IMNCSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-Ionics in Single-Layer Transition Metal Nitrides

  • Rojas, Julius de
  • Salguero, Joaquín
  • Ibrahim, Fatima
  • Chshiev, Mairbek
  • Quintana, Alberto
  • Lopeandía, Aitor
  • Liedke, Maciej O.
  • Butterling, Maik
  • Hirschmann, Eric
  • Wagner, Andreas
  • Abad Muñoz, Llibertat
  • Costa Krämer, José Luis
  • Menéndez, Enric
  • Sort, Jordi
Magneto-ionics allows for tunable control of magnetism by voltage-driven transport of ions, traditionally oxygen or lithium and, more recently, hydrogen, fluorine, or nitrogen. Here, magneto-ionic effects in single-layer iron nitride films are demonstrated, and their performance is evaluated at room temperature and compared with previously studied cobalt nitrides. Iron nitrides require increased activation energy and, under high bias, exhibit more modest rates of magneto-ionic motion than cobalt nitrides. Ab initio calculations reveal that, based on the atomic bonding strength, the critical field required to induce nitrogen-ion motion is higher in iron nitrides (≈6.6 V nm-1) than in cobalt nitrides (≈5.3 V nm-1). Nonetheless, under large bias (i.e., well above the magneto-ionic onset and, thus, when magneto-ionics is fully activated), iron nitride films exhibit enhanced coercivity and larger generated saturation magnetization, surpassing many of the features of cobalt nitrides. The microstructural effects responsible for these enhanced magneto-ionic effects are discussed. These results open up the potential integration of magneto-ionics in existing nitride semiconductor materials in view of advanced memory system architectures., Financial support by the European Research Council (SPINPORICS 2014-Consolidator Grant, Agreement No. 648454, and the MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the Spanish Government (MAT2017-86357-C3-1-R), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032), the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032), and the French ANR (ANR-18-CE24- 0017 “FEOrgSpin” and ELECSPIN ANR-16-CE24-0018 “ELECSPIN”) is acknowledged. This work was partially supported by the Impulse- und Net-working fund of the Helmholtz Association (FKZ VH-VI-442 Memriox) and the Helmholtz Energy Materials Characterization Platform (03ET7015). The PALS measurements were carried out at ELBE at the Helmholtz-Zentrum Dresden-Rossendorf e. V., a member of the Helmholtz Association. We thank the facility staff for assistance. L.A. thanks MINECO for a Ramón y Cajal Contract (RYC-2013-12640).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage control of magnetism with magneto-ionic approaches: Beyond voltage-driven oxygen ion migration

  • Rojas, Julius de
  • Quintana García, Aleix
  • Rius, Gemma
  • Stefani, Christina
  • Domingo, Neus
  • Costa Krämer, José Luis
  • Menéndez, Enric
  • Sort, Jordi
Magneto-ionics is an emerging field in materials science where voltage is used as an energy-efficient means to tune magnetic properties, such as magnetization, coercive field, or exchange bias, by voltage-driven ion transport. We first discuss the emergence of magneto-ionics in the last decade, its core aspects, and key avenues of research. We also highlight recent progress in materials and approaches made during the past few years. We then focus on the "structural-ion"approach as developed in our research group in which the mobile ions are already present in the target material and discuss its potential advantages and challenges. Particular emphasis is given to the energetic and structural benefits of using nitrogen as the mobile ion, as well as on the unique manner in which ionic motion occurs in CoN and FeN systems. Extensions into patterned systems and textures to generate imprinted magnetic structures are also presented. Finally, we comment on the prospects and future directions of magneto-ionics and its potential for practical realizations in emerging fields, such as neuromorphic computing, magnetic random-access memory, or micro- and nano-electromechanical systems., Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant Agreement No. 648454, and the MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the Spanish Government (Nos. MAT2017-86357-C3-1-R, PDC2021-121276-C31, and PID2020-116844RB-C21), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032), and the European Regional Development Fund (Nos. MAT2017-86357-C3-1-R and 2018-LLAV-00032) were acknowledged. E.M. acknowledges support as a Serra Húnter Fellow. G.R. acknowledges support from Ayudas Ramon y Cajal No. RYC-2016-21412., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic electric-field-induced magnetic effects in cobalt oxide thin films: Towards magneto-ionic synapses

  • Martins, Sofia
  • Rojas, Julius de
  • Tan, Zhengwei
  • Cialone, Matteo
  • Lopeandía, Aitor
  • Herrero Martín, Javier
  • Costa Krämer, José Luis
  • Menéndez, Enric
  • Sort, Jordi
Voltage control of magnetism via electric-field-driven ion migration (magneto-ionics) has generated intense interest due to its potential to greatly reduce heat dissipation in a wide range of information technology devices, such as magnetic memories, spintronic systems or artificial neural networks. Among other effects, oxygen ion migration in transition-metal-oxide thin films can lead to the generation or full suppression of controlled amounts of ferromagnetism ('ON-OFF' magnetic transitions) in a non-volatile and fully reversible manner. However, oxygen magneto-ionic rates at room temperature are generally considered too slow for industrial applications. Here, we demonstrate that sub-second ON-OFF transitions in electrolyte-gated paramagnetic cobalt oxide films can be achieved by drastically reducing the film thickness from >200 nm down to 5 nm. Remarkably, cumulative magneto-ionic effects can be generated by applying voltage pulses at frequencies as high as 100 Hz. Neuromorphic-like dynamic effects occur at these frequencies, including potentiation (cumulative magnetization increase), depression (i.e., partial recovery of magnetization with time), threshold activation, and spike time-dependent magnetic plasticity (learning and forgetting capabilities), mimicking many of the biological synapse functions. The systems under investigation show features that could be useful for the design of artificial neural networks whose magnetic properties would be governed with voltage., This work has received funding from the European Unions Horizon 2020 Research and Innovation Programme BeMAGIC under the Marie Sklodowska-Curie grant agreement No 861145. Financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454, and MAGIC-SWITCH 2019-Proof of Concept Grant, Agreement No. 875018), the Spanish Government (MAT2017-86357-C3-1-R, PID2020-116844RB-C21), the Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032) and the European Regional Development Fund (MAT2017-86357-C3-1-R and 2018-LLAV-00032) is acknowledged. The authors would like to thank João Lucas (jgbl89@gmail.com) for the illustrations. XAS experiments were performed at BL29-BOREAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. E. M. is a Serra Húnter Fellow., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron energy-loss spectroscopic tomography of Fe: XCo(3- x)O4 impregnated Co3O4 mesoporous particles: Unraveling the chemical information in three dimensions

  • Yedra, L.
  • Arenal, Raúl
  • López-Ortega, Alberto
  • Estrader, Marta
  • Peiró, Francesca
et al., Electron energy-loss spectroscopy-spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FexCo(3−x)O4/Co3O4 ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal., The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3) and the Spanish CSD2009-00013 and MAT2013-41506 research projects. Catalan government funding from 2014-SGR-1015 and 2014-SGR-672 research projects is also appreciated. R. A. acknowledges funding from MINECO-Spain (FIS2013-46159-C3-3-P). E. P. is grateful to MINECO for the ‘Ramón y Cajal’ contract. M. E. acknowledges the Spanish Ministry of Science and Innovation through the Juan de la Cierva Program. Partial funding from the European Research Council (Consolidator Grant, project no. 648454, SPIN-PORICS) is acknowledged., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Magnetically-actuated mesoporous nanowires for enhanced heterogeneous catalysis

  • Serrà i Ramos, Albert
  • Grau, Sergi
  • Gimbert-Suriñach, Carolina
  • Sort, Jordi
  • Nogués, Josep
  • Vallés Giménez, Elisa
We study the optimization of the catalytic properties of entirely magnetic CoPt compact and mesoporous nanowires of different diameters (25 - 200 nm). The nanowires are a single-entity magnetic-catalyst with a huge catalytically-active surface area, making them robust and easy to fabricate. We show that apart from the size and morphology of the nanowires, other factors can be optimized to enhance the catalytic activity of the nanowires. In particular, given the magnetic character of the nanowires, rotating magnetic fields are a very powerful approach to improve the performance of the catalyst by acting as nano-stirrers, improving the local flow of material towards the active sites of the catalyst. We demonstrate the versatility of the procedure by optimizing (i) the degradation of different types of pollutants (4-nitrophenol and methylene blue) and (ii) hydrogen production. For example, by using 25 nm wide CoPt mesoporous nanowires as catalysts, kinetic normalized constants knor as high as 20667 and 21750 s-1g-1 for 4-nitrophenol and methylene blue reduction, respectively, are obtained, and activity values for hydrogen production from borohydride are as high as 25.0 L H2 g-1 min-1, even at room temperature. These values outperform any current state-of-the-art proposed catalysis strategies for water remediation reactions by at least 10-times and are superior to most advanced approaches to generate hydrogen from borohydride. The recyclability of the nanowires together with the simplicity of the synthetic method makes this approach (using not only CoPt but also other mesoporous magnetic catalysts) very appealing for very diverse types of catalytic applications.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tailoring Staircase-like Hysteresis Loops in Electrodeposited Tri-segmented Magnetic Nanowires: a Strategy toward Minimization of Interwire Interactions

  • Zhang, Jin
  • Agramunt Puig, Sebastià
  • Valle, Núria del
  • Navau Ros, Carles
  • Baró, M. D.
  • Estradé Albiol, Sònia
  • Peiró Martínez, Francisca
  • Pané, Salvador
  • Nelson, Bradley J.
  • Sanchez, Alvaro
  • Nogués, Josep
  • Pellicer Vilà, Eva M. (Eva Maria)
  • Sort, Jordi
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Highly efficient electrochemical and chemical hydrogenation of 4-nitrophenol using recyclable narrow mesoporous magnetic CoPt nanowires

  • Serrà i Ramos, Albert
  • Alcobé i Ollé, Xavier
  • Sort, Jordi
  • Nogués, Josep
  • Vallés Giménez, Elisa
Toxic nitro-compounds, such as 4-nitrophenol, are one of the most common wastewater industrial pollutants. Thus, efficient ways to neutralize them are actively pursued. Here novel procedures to degrade these types of compounds based on the use of mesoporous magnetic nanowires are demonstrated. Fully-mesoporous magnetic narrow (25 nm) CoPt nanowires with an extraordinary effective area are grown using ionic liquid-in-water microemulsions in alumina templates. These mesoporous nanowires are shown to be efficient catalysts for the hydrogenation of 4-nitrophenol by electrocatalysis. Additionally, these nanowires also present exceptional conventional catalytic activity when used in conjunction with NaBH4, particularly when magnetic stirring is utilized. In fact, magnetically actuated mesoporous CoPt nanowires drastically outperform all state-of-the-art 4-nitrophenol catalysts. Additionally, given their magnetic character, these nanowires can be easily recycled and reused. Thus, the outstanding catalytic performance of mesoporous CoPt nanowires makes them excellent candidates for wastewater treatment agents.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electron energy-loss spectroscopic tomography of FexCo(3-x)O4 impregnated Co3O4 mesoporous particles: unraveling the chemical information in three dimensions

  • Yedra Cardona, Lluís
  • Eljarrat Ascunce, Alberto
  • Arenal, Raúl
  • López Conesa, Lluís
  • Pellicer Vilà, Eva M. (Eva Maria)
  • López-Ortega, Alberto
  • Estrader i Bofarull, Marta
  • Sort, Jordi
  • Baró, M. D.
  • Estradé Albiol, Sònia
  • Peiró Martínez, Francisca
Electron energy-loss spectroscopy-spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FexCo(3-x)O4/Co3O4 ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires

  • Isrhad, M. I.
  • Mohamed, N. M.
  • Abdullah, M. Z.
  • Saheed, M. S. M.
  • Mumtaz, A.
  • Yasar, M.
  • Yar, A.
  • Zeeshan, M. Arif
  • Sort, Jordi|||0000-0003-1213-3639
Cobalt nanowires (NWs) have been synthesized by electrodeposition inside the pores of anodized aluminium oxide templates, at different values of applied deposition potential. The as-deposited NWs are parallel to one another and exhibit a high geometrical aspect ratio. The crystal structure of these NWs shows a strong dependence on the applied deposition potential during synthesis. X-ray diffraction indicates the predominance of hexagonal-closed-packed (HCP) phase with (002) texture at low applied deposition potentials, whereas a reorientation of the c-axis of the HCP structure is observed for high electrodeposition potentials. Moreover, for a given electrodeposition time, the length of the NWs also increases with the applied potential. As a result of these structural changes, a switch in the magnetic easy axis, from parallel to perpendicular to the NWs axis, occurs depending on the applied potential. A simplified model is used to account for this reorientation of the effective magnetic anisotropy direction, which takes into account the interplay between shape anisotropy, magnetocrystalline anisotropy and interwire dipolar interactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling the collective magnetic behavior of highly-packed arrays of multi-segmented nanowires

  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Pellicer, Eva|||0000-0002-8901-0998
  • Zhang, Jin
  • Nogués, Josep|||0000-0003-4616-1371
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Sort, Jordi|||0000-0003-1213-3639
A powerful model to evaluate the collective magnetic response of large arrays of segmented nanowires comprising two magnetic segments of dissimilar coercivity separated by a non-magnetic spacer is introduced. The model captures the essential aspects of the underlying physics in these systems while being at the same time computationally tractable for relatively large arrays. The minimum lateral and vertical distances rendering densely packed weakly-interacting nanowires and segments are calculated for optimizing their performance in applications like magnetic sensors or recording media. The obtained results are appealing for the design of multifunctional miniaturized devices actuated by external magnetic fields, whose successful implementation relies on achieving a delicate balance between two opposing technological demands: the need for an ultra-high density of nanowires per unit area and the minimization of inter-wire and inter-segment dipolar interactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailoring staircase-like hysteresis loops in electrodeposited trisegmented magnetic nanowires, a strategy toward minimization of interwire interactions

  • Zhang, Jin
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Baró, M. D.|||0000-0002-8636-1063
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Room-temperature synthesis of three-dimensional porous ZnO@CuNi hybrid magnetic layers with photoluminescent and photocatalytic properties

  • Guerrero, Miguel|||0000-0001-8350-8261
  • Zhang, Jin
  • Altube, Ainhoa
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Roldán, Mónica
  • Pellicer, Eva|||0000-0002-8901-0998
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
A facile synthetic approach to prepare porous ZnO@CuNi hybrid films is presented. Initially, magnetic CuNi porous layers (consisting of phase separated CuNi alloys) are successfully grown by electrodeposition at different current densities using H₂ bubbles as a dynamic template to generate the porosity. The porous CuNi alloys serve as parent scaffolds to be subsequently filled with a solution containing ZnO nanoparticles previously synthesized by sol-gel. The dispersed nanoparticles are deposited dropwise onto the CuNi frameworks and the solvent is left to evaporate while the nanoparticles impregnate the interior of the pores, rendering ZnO-coated CuNi 3D porous structures. No thermal annealing is required to obtain the porous films. The synthesized hybrid porous layers exhibit an interesting combination of tunable ferromagnetic and photoluminescent properties. In addition, the aqueous photocatalytic activity of the composite is studied under UV-visible light irradiation for the degradation of Rhodamine B. The proposed method represents a fast and inexpensive approach towards the implementation of devices based on metal-semiconductor porous systems, avoiding the use of post-synthesis heat treatment steps which could cause deleterious oxidation of the metallic counterpart, as well as collapse of the porous structure and loss of the ferromagnetic properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Toward robust segmented nanowires, understanding the impact of crystallographic texture on the quality of segment interfaces in magnetic metallic nanowires

  • Zhang, Jin
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Segmented nanowires (NWs) have found a wealth of applications due to their multifuctionality, arising from complementarities and synergies among segments of different materials. However, to ensure a practical use of segmented NWs, high quality interfaces between dissimilar segments must be ensured. Herein, tri-segmented CoPt/Cu/Ni NWs and bi-segmented CoPt/Ni magnetic NWs are fabricated by means of template-assisted electrodeposition and the characteristics of their interfaces are investigated in detail. The presence of a Cu segment sandwiched between the CoPt and the Ni segments severely affects the integrity of the whole NW. Namely, Cu deposits in a (200) textured face-centered cubic (fcc) structure, which cannot accommodate well on the c-axis oriented hexagonal close-packed CoPt. Instead, when the Cu segment is absent, well-connected CoPt/Ni NWs with smooth interface are obtained. Unlike the Cu segment, Ni shows the (111) textured fcc structure, which holds good crystallographic matching with the underlying CoPt segment. Magnetic measurements reveal that CoPt/Ni NWs exhibit staircase-like hysteresis loops similar to the tri-segmented CoPt/Cu/Ni NWs. Such loop shape stems from the dissimilar coercivity between the hard (CoPt) and soft (Ni) segments. The bi-segmented NWs (with robust interfaces) are appealing for multi-bit recording media, magnetic nanoelectromechanical systems and magnetically-driven wireless drug delivery nanoplatforms.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electron energy-loss spectroscopic tomography of FeₓCo(₃₋ₓ)O₄ impregnated Co₃O₄ mesoporous particles, unraveling the chemical information in three dimensions

  • Yedra Cardona, Lluís|||0000-0003-1818-9836
  • Eljarrat Ascunce, Alberto
  • Arenal, Raúl|||0000-0002-2071-9093
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Pellicer, Eva|||0000-0002-8901-0998
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Sort, Jordi|||0000-0003-1213-3639
  • Baró, M. D.|||0000-0002-8636-1063
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiró, Francisca
Electron energy-loss spectroscopy - spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FFeₓCo(₃₋ₓ)O₄/Co₃O₄ ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrodeposition of sizeable and compositionally tunable rhodium-iron nanoparticles and their activity toward hydrogen evolution reaction

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Rh-Fe nanoparticles (NPs) with variable Rh/Fe ratios have been obtained by direct current electrodeposition onto Au-metalized Si/Ti substrates from an electrolyte containing Rh(III) and Fe(III) chloride salts. NP mean diameter could be varied in the range of 20-80 nm by playing with the applied current density (-j = 0.5-2 mA cm-2) and deposition times (t = 200-3200 s). NPs were very well adhered to the substrate and became progressively enriched in Fe as the absolute value of the current density increased. X-ray photoelectron spectroscopy analyses revealed that the NPs are mostly metallic. The oxygen signal detected at surface level is relatively high but reduces down to less than 1 at% after 1 min Ar ions sputtering. The as-deposited Rh-Fe NPs are active toward hydrogen evolution reaction in alkaline medium. Different values of the onset potential for water reduction have been observed depending on the j and t values applied for NPs growth. Cycling stability tests reveal that NPs do not suffer from excessive deterioration of their electrocatalytic activity with time.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly efficient electrochemical and chemical hydrogenation of 4-nitrophenol using recyclable narrow mesoporous magnetic CoPt nanowires

  • Serrà, Albert|||0000-0003-0147-3400
  • Alcobé, Xavier
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Josep|||0000-0003-4616-1371
  • Vallés, Elisa
Toxic nitro-compounds, such as 4-nitrophenol, are one of the most common wastewater industrial pollutants. Thus, efficient ways to neutralize them are actively pursued. Here novel procedures to degrade this type of compounds based on the use of mesoporous magnetic nanowires are demonstrated. Fully-mesoporous magnetic narrow (25 nm) CoPt nanowires with an extraordinary effective area are grown by ionic liquid-in-water microemulsions in alumina templates. These mesoporous nanowires are shown to be efficient catalysts for the hydrogenation of 4-nitrophenol by electro-catalysis. Additionally, these nanowires also present an exceptional conventional catalytic activity when used in conjunction with NaBH4, particularly when magnetic stirring is utilized. In fact, magnetically actuated mesoporous CoPt nanowires drastically outperform all state-of-the-art 4-nitrophenol catalysts. Additionally, given their magnetic character, these nanowires can be easily recycled and reused. Thus, the outstanding catalytic performance of mesoporous CoPt nanowires makes them excellent candidates for wastewater treatment agents.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Conformal oxide nanocoatings on electrodeposited 3D porous Ni films by atomic layer deposition

  • Zhang, Jin
  • Coll, Maria Dolors
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A versatile chemical synthesis procedure to obtain Al2O3 and Co2FeO4 nanolayers conformally coating a three-dimensional (3D) porous Ni film is presented. First, porous Ni is grown by hydrogen bubble template-assisted electrodeposition. Subsequently, Al2O3 and Co2FeO4 layers, with thickness ranging from 5 nm to 25 nm, are directly deposited onto the pore walls by atomic layer deposition, while maintaining the porous architecture and magnetic properties of the Ni scaffold. The crystal structure, thickness and distribution of elements within the composite coatings are investigated in detail. The resulting magnetic and wettability properties are assessed. Contact angle tests reveal that 3D porous Ni films become more hydrophilic after coating with Al2O3 or Co2FeO4. From a technological point of view, the obtained composite porous films could be appealing for applications like magnetically-actuated micro/nano-electromechanical systems (MEMS/NEMS) or bio-MEMS/NEMS, among others.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanomechanical behaviour of open-cell nanoporous metals: homogeneous versus thickness-dependent porosity

  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Zhang, Jin
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Two dierent nanoporous materials, porous copper prepared by dealloying and porous nickel prepared by electrodeposition, have been studied by means of nanoindentation experiments at dierent maximum applied loads. While nanoporous Cu is homogeneous along its cross-section, the electrodeposited Ni lms show a graded porosity, with smaller pores and thicker pore walls close to the lm's surface. The mechanical properties of the two materials have been extracted using a methodology based on scaling laws and subsequent interpretation has been performed using nite element simulations. Two dierent deformation mechanisms are observed for nanoporous Cu and nanoporous Ni, respectively. Dealloyed porous copper behaves as an homogeneous material without evident eect of densication and with mechanical properties that are independent of the applied load. Given this homogeneity, it is possible to t the entire loading - unloading curve for dierent maximum applied loads with a single set of mechanical properties. Conversely, electrodeposited porous nickel shows a decrease in the reduced Young's modulus, an increase in yield stress and a constant hardness when the maximum applied load during nanoindentation is increased. While the decrease in the reduced Young's modulus can be explained in the context of thickness inhomogeneity of the electrodeposited porous nickel (i.e., increase of porosity with depth), this cannot explain, and actually would go against, the observed increase in the yield stress, which is instead associated to the decrease in the ligament size.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanocasting synthesis of mesoporous SnO₂ with a tunable ferromagnetic response through Ni loading

  • Fan, Junpeng|||0000-0003-2243-5251
  • Zhang, Jin
  • Solsona, Pau|||0000-0001-9274-2447
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Undoped and Ni-doped ordered mesoporous SnO₂ powders ([Ni(II)]/[Sn(II)] = 0 : 100, 5 : 95, 15 : 85, 20 : 80) were synthesized by nanocasting from mesoporous KIT-6 silica. The resulting Ni content in the Ni-loaded powders ranged between 1 at% and 9 at%. Successful replication of the silica template was verified by scanning electron microscopies for all samples. Residual silicon content did not surpass 4 at%. X-ray diffraction analyses showed that the powders were nanocrystalline, being the rutile-like phase of SnO₂ the dominant structure. Changes in the lattice constants depending on the Ni content were observed, suggesting that Ni enters the rutile structure of SnO₂ to some extent. No extra phases attributed to Ni were detected in the powders except for the sample synthesized from 20 : 80 [Ni(II)]/[Sn(II)], for which NiO as secondary phase was observed. The oxidation state and spatial distribution of Ni in the powders was investigated by X-ray photoelectron spectroscopy (XPS) and electron energy loss spectroscopy (EELS) measurements, respectively. For 6 at% and 9 at% Ni content, the presence of Ni2+ was established. The corresponding EELS mapping showed that a fraction of Ni (the one not forming part of the rutile phase) tended to accumulate at the pore edges, forming a nanometer-thick NiO layer. Compared to undoped SnO₂, Ni-containing powders exhibit a ferromagnetic response at low and room temperatures. Uncompensated spins at the surface of NiO are likely to contribute, in part, to the observed ferromagnetic properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrodeposited Ni-based magnetic mesoporous films as smart surfaces for atomic layer deposition: an 'all-chemical' deposition approach toward 3D nanoengineered composite layers

  • Zhang, Jin
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coll, Maria Dolors
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Ni and Cu-Ni (Cu₂₀Ni₈₀ and Cu₄₅Ni₅₅ in at. %) films, showing a three-dimensional (3D) porous structure and tunable magnetic properties, are prepared by electrodeposition from aqueous surfactant solutions using micelles of P-123 triblock copolymer as structure-directing entities. Pores between 5 and 30 nm and dissimilar space arrangements (continuous interconnected networks, circular pores, corrugated mesophases) are obtained depending on the synthetic conditions. X-ray diffraction studies reveal that the Cu-Ni films have crystallized in the face-centered cubic structure, are textured, and exhibit certain degree of phase separation, particularly those with a higher Cu content. Atomic layer deposition (ALD) is used to conformally coat the mesopores of Cu₂₀Ni₈₀ film with amorphous Al₂O₃, rendering multiphase "nano-in-meso" metal-ceramic composites without compromising the ferromagnetic response of the metallic scaffold. From a technological viewpoint, these 3D nanoengineered composite films could be appealing for applications like magnetically actuated micro/nanoelectromechanical systems (MEMS/NEMS), voltage-driven magneto-electric devices, capacitors, or as protective coatings with superior strength and tribological performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electric-field adjustable time-dependent magnetoelectric response in martensitic FeRh alloy

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Martí Rovirosa, Xavier
  • Macià, Ferran|||0000-0001-5972-4810
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Sort, Jordi|||0000-0003-1213-3639
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic-ferromagnetic phases in FeRh, unbalanced by voltage-controlled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetically-actuated mesoporous nanowires for enhanced heterogeneous catalysis

  • Serrà, Albert|||0000-0003-0147-3400
  • Grau Abarca, Sergi|||0000-0002-7035-4870
  • Gimbert-Suriñach, Carolina|||0000-0002-4412-7607
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Josep|||0000-0003-4616-1371
  • Vallés, Elisa
We study the optimization of the catalytic properties of entirely magnetic Co-Pt compact and mesoporous nanowires of different diameters (25-200 nm) by using magnetic actuation. The nanowires are a single-entity, robust, magnetic-catalyst with a huge catalytically-active surface area. We show that apart from conventional parameters, like the size and morphology of the nanowires, other factors can be optimized to enhance their catalytic activity. In particular, given the magnetic character of the nanowires, rotating magnetic fields are a very powerful approach to boost the performance of the catalyst. In particular, the magnetic field induces them to act as nano-stirrers, improving the local flow of material towards the active sites of the catalyst. We demonstrate the versatility of the procedure by optimizing (i) the degradation of different types of pollutants (4-nitrophenol and methylene blue) and (ii) hydrogen production. For example, by using as little as 0.1 mg mL⁻¹ of 25 nm wide Co-Pt mesoporous nanowires (with ∼3 nm pore size) as catalysts, kinetic normalized constants knor as high as 20,667 and 21,750 s⁻¹ g⁻¹ for 4-nitrophenol and methylene blue reduction, respectively, are obtained. In addition, activity values for hydrogen production from borohydride are as high as 25.0 L H₂ g⁻¹ min⁻¹, even at room temperature. These values outperform any current state-of-the-art proposed catalysis strategies for water remediation reactions by at least 10-times and are superior to most advanced approaches to generate hydrogen from borohydride. The recyclability of the nanowires together with the simplicity of the synthetic method makes this approach (using not only Co-Pt, but also other mesoporous magnetic catalysts) very appealing for very diverse types of catalytic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fabrication of sustainable hydrophobic and oleophilic pseudo-ordered macroporous Fe-Cu films with tunable composition and pore size via electrodeposition through colloidal templates

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Pokki, Juho
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In this work, sustainable hydrophobic and oleophilic macroporous Fe-Cu films are fabricated using a straightforward, inexpensive and environmentally friendly two-step procedure which combines electrodeposition with the colloidal lithography technique. Elemental, morphological and structural characterization of the resulting pseudo-ordered meshes is carried out and wettability is assessed using contact angle measurements with respect to two distinct film compositions (3 at.% Fe vs 75-85 at.% Fe) and three different pore diameters (namely, 200 nm, 350 nm and 500 nm). Water contact angles are measured to be in the range of approximately 109.0-155.1° (without any post-surface functionalization) and a low contact angle hysteresis is observed in the superhydrophobic samples. The increase in the hydrophobic character of the films correlates well with an increase in surface roughness, whereas differences in composition play a minor role. For the superhydrophobic Fe-rich macroporous film, water-oil separation capability and recyclability are also demonstrated while the pore size is favorable for effective water-oil mixture and emulsion separation. The results shown here demonstrate that sustainable and affordable materials processed in a simple and cheap manner can be an asset for the removal of water-immiscible organic compounds from aqueous environments.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Micelle-assisted electrodeposition of mesoporous Fe-Pt smooth thin films onto various substrates and their electrocatalytic activity towards hydrogen evolution reaction

  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Baró, M. D.|||0000-0002-8636-1063
  • Alcantara, Carlos
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Mesoporous Fe-Pt thin films are obtained by micelle-assisted electrodeposition onto metallic substrates with dissimilar activity (namely, gold, copper, and aluminum seed layers evaporated on Si/Ti) under constant applied potential (E=-1.1 V vs. Ag/AgCl) and deposition time (600 s). The amphiphilic triblock copolymer Pluronic P-123 is used as a soft template to guide the formation of mesopores. The occurrence of pores (ca. 7 nm in diameter) with narrow size distribution, distributed evenly over the surface, is observed in all cases. Despite the applied conditions being the same, the roughness and the amount of Fe incorporated in the films are influenced by the nature of the substrate. In particular, ultra-smooth films containing a larger amount of Fe (21 wt %) are obtained when deposition takes place on the Au surface. X-ray diffraction analyses reveal that Pt and Fe are alloyed to a certain extent, although some iron oxides/hydroxides also unavoidably form. The resulting films have been tested as electrocatalysts in the hydrogen evolution reaction (HER) in alkaline media. The mesoporous Fe-rich Fe-Pt films on Au show excellent HER activity and cyclability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Parametric aqueous electrodeposition study and characterization of Fe-Cu films

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In this study, FexCu1-x films over a wide composition range (0≤x≤86) were prepared from an aqueous sulfate electrolytic solution using three different complexing agents and variable plating conditions. The effect of parameters such as bath composition, current density and temperature on the elemental composition, morphology, structure and magnetic properties of the deposits was investigated. The electrochemical behavior was studied using cyclic voltammetry. High quality, smooth deposits with good substrate adhesion and minimized oxygen content were achieved. X-ray patterns indicate phase separation, though results from Rietveld analysis strongly suggest partial alloying. Magnetization dependence on Fe content is clearly demonstrated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Evaporation-induced self-assembly synthesis of Ni-doped mesoporous SnO₂ thin films with tunable room temperature magnetic properties

  • Fan, Junpeng|||0000-0003-2243-5251
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Carretero-Genevrier, Adrian|||0000-0003-0488-9452
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Ni-doped SnO₂ thin films synthesized from variable [Ni(II)/Sn(IV)] molar ratios (0 : 100, 5 : 95, 10 : 90, 15 : 85 and 20 : 80), thicknesses in the range of 100-150 nm, and average pore sizes lower than 10 nm were obtained through a sol-gel based self-assembly process using Pluronic P-123 as a structure-directing agent. Grazing incidence X-ray diffraction experiments indicate that the films mostly possess a tetragonal SnO₂ structure with Ni²+ in substitutional positions, although energy-dispersive X-ray analyses also reveal the occurrence of small NiO clusters in the films produced from high [Ni(II)/Sn(IV)] molar ratios (corresponding to a Ni amount of 8.6 at%). X-ray photoelectron spectroscopy experiments indicate the lack of metallic Ni and the occurrence of oxygen vacancies in the mesoporous films. Interestingly, the magnetic properties of these mesoporous films significantly vary as a function of the doping percentage. The undoped SnO₂ films exhibit a diamagnetic behavior, whereas a clear paramagnetic signal dominates the magnetic response of the Ni-doped mesoporous films, probably due to the presence of NiO as a secondary phase. A small ferromagnetic-like contribution superimposed to the paramagnetic background is observed for samples with high Ni contents, possibly stemming from the combined effect from Ni incorporation and the occurrence of oxygen vacancies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage-induced coercivity reduction in nanoporous alloy films, a boost towards energy-efficient magnetic actuation

  • Quintana, Alberto|||0000-0002-9813-735X
  • Zhang, Jin
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Menéndez, Enric|||0000-0003-3809-2863
  • Quadrado del Burgo, Ramón|||0000-0002-8344-2319
  • Robles, Roberto|||0000-0001-7808-0395
  • Baró, M. D.|||0000-0002-8636-1063
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Muller Jevenois, Carlos
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Magnetic data storage and magnetically actuated devices are conventionally controlled by magnetic fields generated using electric currents. This involves significant power dissipation by Joule heating effect. To optimize energy efficiency, manipulation of magnetic information with lower magnetic fields (i.e., lower electric currents) is desirable. This can be accomplished by reducing the coercivity of the actuated material. Here, a drastic reduction of coercivity is observed at room temperature in thick (≈600 nm), nanoporous, electrodeposited Cu-Ni films by simply subjecting them to the action of an electric field. The effect is due to voltage-induced changes in the magnetic anisotropy. The large surface-area-to-volume ratio and the ultranarrow pore walls of the system allow the whole film, and not only the topmost surface, to effectively contribute to the observed magnetoelectric effect. This waives the stringent "ultrathin-film requirement" from previous studies, where small voltage-driven coercivity variations were reported. This observation expands the already wide range of applications of nanoporous materials (hitherto in areas like energy storage or catalysis) and it opens new paradigms in the fields of spintronics, computation, and magnetic actuation in general.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-templating faceted and spongy single-crystal ZnO nanorods, resistive switching and enhanced piezoresponse

  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez, Andrés|||0000-0003-2847-0138
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A template-free, cost-effective, hydrothermal procedure is used to synthesize large areas of either faceted or spongy self-standing single-crystalline ZnO nanorods (NRs) from electrodeposited Zn films. The morphology of the NRs (faceted versus spongy) can be easily adjusted by simply varying the electrodeposition parameters of the parent Zn film. The obtained NRs exhibit an enhanced piezoelectric response (compared to bulk ZnO) and resistive switching properties which depend on their intrinsic morphology. This combination of properties together with the simplicity of the synthetic approach is particularly appealing for the fabrication of large arrays of nanosensors, nanoactuators and other applications that could benefit from an enhanced surface area in single-crystalline semiconductors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the origin of magnetism in mesoporous Cu-doped SnO₂ magnetic semiconductor

  • Fan, Junpeng|||0000-0003-2243-5251
  • Menéndez, Enric|||0000-0003-3809-2863
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Quintana, Alberto|||0000-0002-9813-735X
  • Weschke, Eugen
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The origin of magnetism in wide-gap semiconductors doped with non-ferromagnetic 3d transition metals still remains intriguing. In this article, insights in the magnetic properties of ordered mesoporous Cu-doped SnO₂ powders, prepared by hard-templating, have been unraveled. Whereas, both oxygen vacancies and Fe-based impurity phases could be a plausible explanation for the observed room temperature ferromagnetism, the low temperature magnetism is mainly and unambiguously arising from the nanoscale nature of the formed antiferromagnetic CuO, which results in a net magnetization that is reminiscent of ferromagnetic behavior. This is ascribed to uncompensated spins and shape-mediated spin canting effects. The reduced blocking temperature, which resides between 30 and 5 K, and traces of vertical shifts in the hysteresis loops confirm size effects in CuO. The mesoporous nature of the system with a large surface-to-volume ratio likely promotes the occurrence of uncompensated spins, spin canting, and spin frustration, offering new prospects in the use of magnetic semiconductors for energy-efficient spintronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Micelle-assisted electrodeposition of highly mesoporous Fe-Pt nodular films with soft magnetic and electrocatalytic properties

  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Baró, M. D.|||0000-0002-8636-1063
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Fe-Pt nodular films (with a regular spatial arrangement of sub-15 nm pores) are grown onto evaporated Au, Cu and Al conductive layers by micelle-assisted electrodeposition from metal chloride salts in the presence of Pluronic P123 tri-block copolymer dissolved in the aqueous electrolytic bath. This synthetic approach constitutes a simple, one-step, versatile procedure to grow multifunctional mesoporous layers appealing for diverse applications that take advantage of materials with an ultra-high surface area-to-volume ratio. The films exhibit tuneable composition with relative Fe/Pt weight ratios, disregarding oxygen, varying from 4/96 to 52/48. All the mesoporous alloys show a soft magnetic behaviour with tuneable saturation magnetization and coercivity values (the latter ranging from ca. 5 Oe to 40 Oe). In addition, the Au/Fe-Pt deposits (even the ones with higher Fe content) exhibit good performance towards hydrogen evolution reaction in both alkaline and acidic media due to the inherent mesoporosity, with excellent stability after running 50 cycles. The interest of alloying Fe with Pt is thus two-fold: (i) to confer magnetic properties to the mesoporous alloys and (ii) to reduce the amount of the costly noble metal in the electrocatalyst in an environmentally sustainable manner.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ferromagnetic-like behaviour in bismuth ferrite films prepared by electrodeposition and subsequent heat treatment

  • Bilican, Doğa|||0000-0002-9497-5065
  • Menéndez, Enric|||0000-0003-3809-2863
  • Solsona, Pau|||0000-0001-9274-2447
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Bismuth ferrite (BiFeO₃) films (10 μm in thickness) are synthesized by electrodeposition from a dimethylformamide bath containing Bi and Fe nitrate salts as precursors followed by heat treatment in air. Thermal treatments are needed to induce crystallisation of the as-deposited amorphous-like films. A detailed morphological, structural and magnetic characterisation evidences that BiFeO3 forms in a rather narrow temperature window (around 600 °C). At lower and higher temperatures, secondary binary and ternary oxides are also formed. Soft ferromagnetic-like behaviour is observed in all films, which presumably arises from the obtained nanoscale structure, which favours the occurrence of spin canting in the BiFeO₃ antiferromagnetic phase. The eventual contribution from secondary phases to the observed ferromagnetic-like response is also discussed. The obtained results are appealing for the integration of BiFeO₃ into devices that may require relatively thick films with an enhanced surface area-to-volume ratio. The growth of this type of material by techniques other than electrodeposition is not straightforward.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hidden magnetic states emergent under electric field, in a room temperature composite magnetoelectric multiferroic

  • Clarkson, J. D.
  • Fina, Ignasi|||0000-0003-4182-6194
  • Liu, Z. Q.
  • Lee, Y.
  • Kim, J.
  • Frontera, Carlos|||0000-0002-0091-4756
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Wisotzki, S.
  • Sáncherz, F.
  • Sort, Jordi|||0000-0003-1213-3639
  • Hsu, S. L.
  • Ko, C.
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • Wu, J.
  • Christen, H. M.
  • Heron, J. T.
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Salahuddin, S.
  • Kioussis, N.
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Martí, X.
  • Ramesh, Ramamoorthy
The ability to control a magnetic phase with an electric field is of great current interest for a variety of low power electronics in which the magnetic state is used either for information storage or logic operations. Over the past several years, there has been a considerable amount of research on pathways to control the direction of magnetization with an electric field. More recently, an alternative pathway involving the change of the magnetic state (ferromagnet to antiferromagnet) has been proposed. In this paper, we demonstrate electric field control of the Anomalous Hall Transport in a metamagnetic FeRh thin film, accompanying an antiferromagnet (AFM) to ferromagnet (FM) phase transition. This approach provides us with a pathway to "hide" or "reveal" a given ferromagnetic region at zero magnetic field. By converting the AFM phase into the FM phase, the stray field, and hence sensitivity to external fields, is decreased or eliminated. Using detailed structural analyses of FeRh films of varying crystalline quality and chemical order, we relate the direct nanoscale origins of this memory effect to site disorder as well as variations of the net magnetic anisotropy of FM nuclei. Our work opens pathways toward a new generation of antiferromagnetic - ferromagnetic interactions for spintronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable magnetism in nanoporous CuNi alloys by reversible voltage-driven element-selective redox processes

  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Baró, M. D.|||0000-0002-8636-1063
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Voltage-driven manipulation of magnetism in electrodeposited 200 nm thick nanoporous single-phase solid solution Cu20 Ni80 (at%) alloy films (with sub 10 nm pore size) is accomplished by controlled reduction-oxidation (i.e., redox) processes in a protic solvent, namely 1 m NaOH aqueous solution. Owing to the selectivity of the electrochemical processes, the oxidation of the CuNi film mainly occurs on the Cu counterpart of the solid solution, resulting in a Ni-enriched alloy. As a consequence, the magnetic moment at saturation significantly increases (up to 33% enhancement with respect to the as-prepared sample), while only slight changes in coercivity are observed. Conversely, the reduction process brings Cu back to its metallic state and, remarkably, it becomes alloyed to Ni again. The reported phenomenon is fully reversible, thus allowing for the precise adjustment of the magnetic properties of this system through the sign and amplitude of the applied voltage.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coercivity Modulation in Fe-Cu Pseudo-Ordered Porous Thin Films Controlled by an Applied Voltage, A Sustainable, Energy-Efficient Approach to Magnetoelectrically Driven Materials

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Campoy-Quiles, Mariano|||0000-0002-8911-640X
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Fe-Cu films with pseudo-ordered, hierarchical porosity are prepared by a simple, two-step procedure that combines colloidal templating (using sub-micrometer-sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage-driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface-area-to-volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Large magnetoelectric effects in electrodeposited nanoporous microdisks driven by effective surface charging and magneto-ionics

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Weschke, Eugen
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A synergetic approach to enhance magnetoelectric effects (i.e., control of magnetism with voltage) and improve energy efficiency in magnetically actuated devices is presented. The investigated material consists of an ordered array of Co-Pt microdisks, in which nanoporosity and partial oxidation are introduced during the synthetic procedure to synergetically boost the effects of electric field. The microdisks are grown by electrodeposition from an electrolyte containing an amphiphilic polymeric surfactant. The bath formulation is designed to favor the incorporation of oxygen in the form of cobalt oxide. A pronounced reduction of coercivity (88%) and a remarkable increase of Kerr signal amplitude (60%) are observed at room temperature upon subjecting the microdisks to negative voltages through an electrical double layer. These large voltage-induced changes in the magnetic properties of the microdisks are due to (i) the high surface-area-to-volume ratio with ultranarrow pore walls (sub-10 nm) that promote enhanced electric charge accumulation and (ii) magneto-ionic effects, where voltage-driven O2- migration promotes a partial reduction of CoO to Co at room temperature. This simple and versatile procedure to fabricate patterned "nano-in-micro" magnetic motifs with adjustable voltage-driven magnetic properties is very appealing for energy-efficient magnetic recording systems and other magnetoelectronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage-controlled ON-OFF ferromagnetism at room temperature in a single metal oxide film

  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Liedke, Maciej O.
  • Butterling, Maik|||0000-0003-3674-0767
  • Wagner, Andreas|||0000-0001-7575-3961
  • Sireus, Verònica
  • Torruella, Pau
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Dendooven, Jolien
  • Detavernier, Christophe
  • Murray, Peyton D.|||0000-0003-0389-0611
  • Allen Gilbert, Dustin
  • Liu, Kai|||0000-0001-9413-6782
  • Pellicer, Eva|||0000-0002-8901-0998
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
Electric-field-controlled magnetism can boost energy efficiency in widespread applications. However, technologically, this effect is facing important challenges: mechanical failure in strain-mediated piezoelectric/magnetostrictive devices, dearth of room-temperature multiferroics, or stringent thickness limitations in electrically charged metallic films. Voltage-driven ionic motion (magneto-ionics) circumvents most of these drawbacks while exhibiting interesting magnetoelectric phenomena. Nevertheless, magneto-ionics typically requires heat treatments and multicomponent heterostructures. Here we report on the electrolyte-gated and defect-mediated O and Co transport in a Co₃O₄ single layer which allows for room-temperature voltage-controlled ON-OFF ferromagnetism (magnetic switch) via internal reduction/oxidation processes. Negative voltages partially reduce Co₃O₄ to Co (ferromagnetism: ON), resulting in graded films including Co- and O-rich areas. Positive bias oxidizes Co back to Co₃O₄ (paramagnetism: OFF). This electric-field-induced atomic-scale reconfiguration process is compositionally, structurally, and magnetically reversible and self-sustained, since no oxygen source other than the Co₃O₄ itself is required. This process could lead to electric-field-controlled device concepts for spintronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Simultaneous Local Heating/Thermometry Based on Plasmonic Magnetochromic Nanoheaters, Simultaneous local nano-heating/thermometry based on plasmonic magnetochromic nanodomes

  • Li, Zhi
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Aranda-Ramos, Antonio|||0000-0003-3476-7026
  • Tajada Herraiz, José Luis
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Vavassori, Paolo
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
A crucial challenge in nanotherapies is achieving accurate and real-time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic-induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60-fold smaller than state-of-the-art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real-time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state-of-the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetically amplified photothermal therapies and multimodal imaging with magneto-plasmonic nanodomes

  • Li, Zhi
  • Aranda-Ramos, Antonio|||0000-0003-3476-7026
  • Güell Grau, Pau|||0000-0002-2363-4079
  • Tajada Herraiz, José Luis
  • Pou Macayo, Laia
  • Lope-Piedrafita, Silvia|||0000-0002-8127-6425
  • Pi, F.|||0000-0001-7347-4897
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
Nanotherapies require new ways for controlling and improving the delivery of the therapeutic agents to the site of action to maximize their efficacy and minimize the side effects. This control is particularly relevant in photothermal treatments to reduce the required light intensity and amount of injected nanoparticles, and to minimize necrotic cell deaths. Here we present a novel concept for multifunctional nanobiomedical agents: magneto-plasmonic (MP) nanodomes for magnetically guided and amplified photothermal therapies and as contrast agents for multimodal imaging. The MP nanodomes are composed of a Fe/Au bilayer semi-shell deposited on a 100 nm diameter fluorescent polystyrene nanosphere, which gather a unique combination of straightforward functionalization, high colloidal stability, very strong ferromagnetic behavior and intense optical absorption efficiency in the near infrared. We show that the photothermal conversion efficiency of the Fe/Au nanodomes with high Fe ratios is substantially larger than pure plasmonic Au nanodomes and the state-of-art plasmonic nanoheaters, i.e. Au nanorods and nanoshells, by merging strong optical absorption, minimized scattering and low optical anisotropy. Remarkably, the effective magnetophoretic concentration of the Fe/Au nanodomes at the illumination region enables large local increase of the optically induced temperature rise. The Fe semishell also provides very intense T contrast in nuclear magnetic resonance, which is at least 15-fold larger per particle than commercial iron oxide contrast agents. Moreover, the fluorescent polystyrene nanosphere and the Au semishell integrate valuable fluorescent and X-ray contrasts, respectively, which we have used to assess the nanodomes internalization by cancer cells. The MP nanodomes are nontoxic to cells even in the case of magnetophoretic local enrichment with initially high particle concentration (100 μg/mL). Remarkably, we demonstrate amplified local photothermal treatments by the magnetic enrichment of the nanodomes at the illumination region, which enables reaching nearly 100% reduction of cell viability with low particle concentration (10 μg/mL) and mild NIR laser intensity (5 W/cm). These results highlight the high potential of MP nanodomes for magnetically guided and amplified photothermal therapies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Disentangling Highly Asymmetric Magnetoelectric Effects in Engineered Multiferroic Heterostructures

  • Menéndez, Enric|||0000-0003-3809-2863
  • Sireus, Verònica
  • Quintana, Alberto|||0000-0002-9813-735X
  • Fina, Ignasi|||0000-0003-4182-6194
  • Casals, Blai|||0000-0002-2941-1861
  • Cichelero, Rafael
  • Kataja, Mikko
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Catalan, Gustau|||0000-0003-0214-4828
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Sort, Jordi|||0000-0003-1213-3639
One of the main strategies to control magnetism by voltage is the use of magnetostrictive-piezoelectric hybrid materials, such as ferromagnetic-ferroelectric heterostructures. When such heterostructures are subjected to an electric field, piezostrain-mediated effects, electronic charging, and voltage-driven oxygen migration (magnetoionics) may simultaneously occur, making the interpretation of the magnetoelectric effects not straightforward and often leading to misconceptions. Typically, the strain-mediated magnetoelectric response is symmetric with respect to the sign of the applied voltage because the induced strain (and variations in the magnetization) depends on the square of the ferroelectric polarization. Conversely, asymmetric responses can be obtained from electronic charging and voltage-driven oxygen migration. By engineering a ferromagnetic-ferroelectric hybrid consisting of a magnetically soft 50-nm thick Fe75Al25 (at. %) thin film on top of a (110)-oriented Pb(Mg1/3Nb2/3)O3-32PbTiO3 ferroelectric crystal, a highly asymmetric magnetoelectric response is obtained and the aforementioned magnetoelectric effects can be disentangled. Specifically, the large thickness of the Fe75Al25 layer allows dismissing any possible charge accumulation effect, whereas no evidence of magnetoionics is observed experimentally, as expected from the high resistance to oxidation of Fe75Al25, leaving strain as the only mechanism to modulate the asymmetric magnetoelectric response. The origin of this asymmetric strain-induced magnetoelectric effect arises from the asymmetry of the polarization reversal in the particular crystallographic orientation of the ferroelectric substrate. These results are important to optimize the performance of artificial multiferroic heterostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electric field control of magnetism in iron oxide nanoporous thin film

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Mercier Fernández, Pau
  • Auffret, Stéphane
  • Baltz, Vincent
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Voltage control of the magnetic properties of oxide thin films is highly appealing to enhance energy efficiency in miniaturized spintronic and magnetoelectric devices. Herein, magnetoelectric effects in electrolyte-gated nanoporous iron oxide films are investigated. Highly porous films were prepared by the evaporation-induced self-assembly of sol-gel precursors with a sacrificial block-copolymer template. For comparison, films with less porosity but analogous crystallographic structure were also prepared using an identical procedure except without the polymer template. The films were found to be 70-85 nm in thickness as measured by scanning electron microscopy and primarily hematite as determined by Raman spectroscopy. The templated (highly porous) films showed a very large magnetoelectric response with a maximum increase in magnetic moment at saturation of a factor of 13 and a noticeable (2-fold) increase of coercivity (after applying -50 V). The nontemplated films also exhibited a pronounced increase of magnetic moment at saturation of a factor of 4, although the coercivity remained unaffected over the same voltage range. Magnetoelectric effects in these latter films were found to be fully reversible in the voltage window ±10 V. The observed changes in magnetic properties are concluded to be magneto-ionically driven with oxygen ion exchange between the iron oxide and the liquid electrolyte, as evidenced from Raman and X-ray photoelectron spectroscopy experiments.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Functional macroporous iron-phosphorous films by electrodeposition on colloidal crystal templates

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • de Paz Castany, Roger|||0000-0003-4211-2636
  • Alcantara, Carlos
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Pseudo-ordered macroporous iron-phosphorous (Fe-P) films have been electrodeposited potentiostatically from a citrate-sulfate bath onto Au surfaces pre-patterned with a colloidal crystal mask of polystyrene spheres of 350 nm in diameter. The electrolyte contained sodium hypophosphite as the P source, enabling the incorporation of 6-14 at.% P. For comparative purposes, continuous films have been obtained galvanostatically on unpatterned Au surfaces. In both cases, the P content could be varied to a certain extent by adjusting the deposition potential or current density. Tunable microstructure and magnetic response was observed due to the dissimilar chemical composition, with coercivity values being larger in the macroporous films. Additionally, wettability analyses showed that these were more hydrophobic, reaching contact angle values of about 130∘. In spite of their hydrophobic character, the samples were catalytic toward oxygen evolution reaction (OER) in alkaline media. The macroporous Fe-P films showed faster kinetics for OER than their nonporous counterparts. Our results show that electrodeposited porous Fe-P based materials show an interesting combination of properties which make them appealing for applications including water cleaning, soft-magnetic components, or electrocatalytic production of oxygen, to name a few.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Large magnetoelectric effects mediated by electric-field-driven nanoscale phase transformations in sputtered (nanoparticulate) and electrochemically dealloyed (nanoporous) Fe-Cu films

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Quintana, Alberto|||0000-0002-9813-735X
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Large magnetoelectric effects are observed in as-sputtered (nanoparticulate-like) and electrochemically dealloyed (nanoporous) 200 nm thick Fe-Cu films. Large magnetoelectric effects are observed in as-sputtered (nanoparticulate-like) and electrochemically dealloyed (nanoporous) 200 nm thick Fe-Cu films. Application of positive voltages decreases both the saturation magnetization (M ) and coercivity (H ) of the films, while negative voltages cause the reverse effect (increase of M and H ). The relative variations are as high as 20% for M and beyond 100% for H , both for the as-sputtered and dealloyed states. These changes in magnetic properties are caused by controlled and reversible electric-field-driven nanoscale phase transformations between face-centered cubic (fcc) and body-centered cubic (bcc) structures. These phase transitions are in turn due to selective redox reactions induced by the applied voltage, which can be regarded as a "magnetoionic effect." The controlled tuning of H and M with the moderate values of applied voltage, together with the sustainable composition of the investigated alloys (not containing noble metals, as opposed to many previous works on magnetoelectric effects in thin films), pave the way towards the implementation of magnetic and spintronic devices with enhanced energy efficiency and functionalities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain gradient mediated magnetoelectricity in Fe-Ga/P(VDF-TrFE) multiferroic bilayers integrated on silicon

  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Gómez, Andrés|||0000-0003-2847-0138
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Menéndez, Enric|||0000-0003-3809-2863
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The primary advantage of magnetoelectric heterostructures exhibiting direct magnetoelectric effect is the possibility to induce and modulate the electrical response of the ferroelectric phase directly with an external magnetic field (i.e., wirelessly, without applying electric field). Nevertheless, the magnetoelectric coupling in such heterostructures is commonly limited by substrate clamping which hinders effective strain propagation. In this work, 1 μm thick ferromagnetic Fe-Ga layers were electrodeposited onto rigid Si/Cu substrates and subsequently coated with ferroelectric P(VDF-TrFE). Under magnetic field, the (110) textured Fe-Ga alloy is compressed along the z-direction by 0.033%, as demonstrated by X-ray diffraction. The experimental results suggest that while the bottom of the Fe-Ga layer is clamped, its air side exhibits a pronounced tetragonal deformation thanks to the residual nanoporosity existing between the columnar grains, that is, a strain gradient develops across the thickness of the Fe-Ga film. This strain gradient in Fe-Ga induces a change in the piezoresponse of the adjacent ferroelectric P(VDF-TrFE) layer. These results pave the way to the design of high-performance microelectromechanical systems (MEMS) with magnetoelectric response integrated on rigid substrates.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrolyte-gated magnetoelectric actuation, Phenomenology, materials, mechanisms, and prospective applications

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Manipulation of the magnetic behavior of materials with voltage (i.e., magnetoelectric actuation) has become a topic of intense research during the last years. Apart from its obvious interest from a basic science standpoint, control and eventual switching of the magnetization without applying any external magnetic field (or spin polarized current) has the potential to drastically reduce the power consumption of magnetic devices due to the lack (or minimization) of Joule heating dissipation effects. Herein, an overview of the state-of-the-art of electrolyte-gated magnetoelectric actuation (where an electric field is applied using an electrolyte, either liquid or solid) is provided. The different types of mechanisms responsible for voltage-driven magnetic actuation (surface charging, ionic migration, also termed "magneto-ionics," reduction/oxidation reactions, and ferroelectric/ferromagnetic coupling) are summarized. The various effects (changes in coercivity, anisotropy easy axis, exchange bias field, saturation magnetization, Curie temperature, etc.) observed in the different types of materials investigated so far (mainly metallic thin films and semiconductors, porous alloys, and nanocomposite structures) are described. The potential applications of electrolyte-gated magnetoelectric actuation in devices as well as the current challenges in the field are also reviewed with the aim of providing the basic ingredients for further prospects and technological advancements in this area.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversible, electric-field induced magneto-tonic control of magnetism in mesoporous cobalt ferrite thin films

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Menéndez, Enric|||0000-0003-3809-2863
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez, Andrés|||0000-0003-2847-0138
  • Auffret, Stéphane
  • Baltz, Vincent
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The magnetic properties of mesoporous cobalt ferrite films can be largely tuned by the application of an electric field using a liquid dielectric electrolyte. By applying a negative voltage, the cobalt ferrite becomes reduced, leading to an increase in saturation magnetization of 15% (M) and reduction in coercivity (H) between 5-28%, depending on the voltage applied (-10 V to -50 V). These changes are mainly non-volatile so after removal of -10 V M remains 12% higher (and H 5% smaller) than the pristine sample. All changes can then be reversed with a positive voltage to recover the initial properties even after the application of -50 V. Similar studies were done on analogous films without induced porosity and the effects were much smaller, underscoring the importance of nanoporosity in our system. The different mechanisms possibly responsible for the observed effects are discussed and we conclude that our observations are compatible with voltage-driven oxygen migration (i.e., the magneto-ionic effect).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting room-temperature magneto-ionics in a non-magnetic oxide semiconductor

  • de Rojas, Julius|||0000-0002-1206-4744
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Salguero, Joaquín
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Abad, Llibertat|||0000-0003-2637-8629
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Wagner, Andreas|||0000-0001-7575-3961
  • Henderick, Lowie
  • Dendooven, Jolien
  • Detavernier, Christophe
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Voltage control of magnetism through electric field-induced oxygen motion (magneto-ionics) could represent a significant breakthrough in the pursuit for new strategies to enhance energy efficiency in magnetically actuated devices. Boosting the induced changes in magnetization, magneto-ionic rates and cyclability continue to be key challenges to turn magneto-ionics into real applications. Here, it is demonstrated that room-temperature magneto-ionic effects in electrolyte-gated paramagnetic Co3O4 films can be largely increased both in terms of generated magnetization (6 times larger) and speed (35 times faster) if the electric field is applied using an electrochemical capacitor configuration (utilizing an underlying conducting buffer layer) instead of placing the electric contacts at the side of the semiconductor (electric-double-layer transistor-like configuration). This is due to the greater uniformity and strength of the electric field in the capacitor design. These results are appealing to widen the use of ion migration in technological applications such as neuromorphic computing or iontronics in general.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailoring magnetic and mechanical properties of mesoporous single-phase Ni-Pt films by electrodeposition

  • Eiler, Konrad|||0000-0001-8648-6395
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Homogeneous mesoporous Ni-rich Ni-Pt thin films with adjustable composition have been synthesised by one-step micelle-assisted electrodeposition. The films exhibit a face-centred cubic solid solution (single phase) and their magnetic and mechanical properties can be tuned by varying the alloy composition. In particular, the Curie temperature (TC) is shown to decrease with the Pt content and thin films with a TC close to room temperature (i.e. Ni58Pt42) and below can be produced. Hysteresis loops show a decrease of saturation magnetisation (Ms) and coercivity (Hc) with decreasing Ni content. A comparison of porous and dense films reveals significantly lower saturation magnetic field strength for porous films. Concerning mechanical properties, mainly two trends can be observed: a decrease of the Young's modulus of the nanoporous films with respect to dense films by 10% in average and a progressive increase of Young's modulus with the Ni content from 4.2 GPa to 5.7 GPa in both types of films. The tunability of properties and facility of synthesis make this alloy a promising material for microelectromechanical systems (MEMS).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the properties of sharply defined submicron scale FeCu and FePd magnetic structures fabricated by electrodeposition onto electron-beam-lithographed substrates

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Cialone, Matteo|||0000-0002-3018-2787
  • Celegato, Federica|||0000-0002-7076-6234
  • Rizzi, Paola|||0000-0002-3977-2839
  • Tiberto, Paola|||0000-0002-7409-2281
  • Vadilonga, Simone
  • Többens, Daniel
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In this work, Fe-X (X = Cu, Pd) submicron-scale structures were electrodeposited onto pre-patterned substrates prepared by e-beam lithography. The FeCu and FePd (with reduced Pd content) systems were investigated as attractive candidates for a variety of potential applications in magnetic data storage and biomedicine. Confined growth in the restricted cavities resulted in a nanoscale grain size leading to well-defined geometries with sharp edges and corners and an average height of up to 215 nm. Specifically, nine 100 μm × 100 μm arrays of three geometries (cylindrical, rectangular and cruciform) in three different sizes were created. In addition, the total deposition time ranged from 3.5 s (FeCu) to 200 s (FePd), i.e. much faster than by traditional physical vapor deposition approaches and was performed at ambient conditions. Magnetic force microscopy for the cylindrical and cruciform structures revealed virtually no contrast at zero field, suggesting magnetic curling effects (instead of coherent rotation) during magnetization reversal. These curling effects result in low values of remanent magnetization, which is advantageous in minimizing dipolar interactions between the structures either when they are deposited onto the substrate or eventually dispersed in a liquid (e.g. in biomedical applications, as drug delivery carriers, where particle agglomeration is undesirable).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage-driven motion of nitrogen ions, a new paradigm for magneto-ionics

  • de Rojas, Julius|||0000-0002-1206-4744
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Salguero, Joaquín
  • Muñiz, Beatriz
  • Ibrahim, Fatima
  • Chshiev, Mairbek|||0000-0001-9232-7622
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Wagner, Andreas|||0000-0001-7575-3961
  • Sireus, Veronica
  • Abad, Llibertat|||0000-0003-2637-8629
  • Jensen, Christopher J.|||0000-0001-7459-1841
  • Liu, Kai|||0000-0001-9413-6782
  • Nogués, Josep|||0000-0003-4616-1371
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics, understood as voltage-driven ion transport in magnetic materials, has largely relied on controlled migration of oxygen ions. Here, we demonstrate room-temperature voltage-driven nitrogen transport (i.e., nitrogen magneto-ionics) by electrolyte-gating of a CoN film. Nitrogen magneto-ionics in CoN is compared to oxygen magneto-ionics in Co3O4. Both materials are nanocrystalline (face-centered cubic structure) and show reversible voltage-driven ON-OFF ferromagnetism. In contrast to oxygen, nitrogen transport occurs uniformly creating a plane-wave-like migration front, without assistance of diffusion channels. Remarkably, nitrogen magneto-ionics requires lower threshold voltages and exhibits enhanced rates and cyclability. This is due to the lower activation energy for ion diffusion and the lower electronegativity of nitrogen compared to oxygen. These results may open new avenues in applications such as brain-inspired computing or iontronics in general.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The order of addition and time matters, Impact of electrolyte processing on micelle-assisted electrosynthesis of mesoporous alloys

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Mesoporous thin films are currently awaking a considerable interest for their prospective use in applications ranging from catalysis to energy storage. Yet, some of the synthetic parameters enabling a reproducible development of mesoporosity remain uncontrolled. In this research, we demonstrate that a subtle change in the procedure for the electrolyte preparation for the electrosynthesis of mesoporous Co‒Pt films is critical for reproducing the mesoporosity of the alloys. Specifically, we show that dissolution of the platinum salt (Na2PtCl6·6H2O) in water and storage of the solution (referred to as 'equilibration time') before adding the remaining reagents and additives (CoCl2 and P-123) are imperative to consistently reproduce the films mesoporosity. Highly mesoporous Pt-rich Co‒Pt films (10-23 at.% Co), with a pore diameter of 10‒17 nm, were obtained from an electrolyte that involved an equilibration time, while mesoporosity was often absent in films grown from a freshly prepared electrolyte (i.e., upon dissolving all chemicals immediately before electrodeposition). The results suggest that pore formation is governed by the complexation dynamics of Pt(IV) in water, which was investigated by UV-vis spectroscopy. Namely, the concentration of hydroxochloroplatinate complexes ([PtCl6-x(OH)x]2-) originating from the exchange of Cl- by OH- ions increase during the equilibration time. [PtCl6-x(OH)x]2- species would interact more favorably with the hydrophilic poly(ethylene oxide) moieities of P-123 micelles than [PtCl6]2-. The distinct interaction between micelles and the complexes of platinum is key for the reproducible generation of a mesoporous network. Our finding highlights the relevant role of electrolyte processing for the control of mesoporosity in metallic systems prepared by micelle-assisted electrodeposition, which we believe can be extended to many electrolytic processes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magneto-ionic control of magnetism in two-oxide nanocomposite thin films comprising mesoporous cobalt ferrite conformally nanocoated with HfO2

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Yu, Pengmei
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Mercier Fernández, Pau
  • Coll, Mariona|||0000-0001-5157-7764
  • Sort, Jordi|||0000-0003-1213-3639
Advances in nanotechnology require of robust methods to fabricate new types of nanostructured materials whose properties can be controlled at will using simple procedures. Nanoscale composites can benefit from actuation protocols that involve mutual interfacial interactions on the nanoscale. Herein, a method to create nanoscale composite thin films consisting of mesoporous cobalt ferrite (CFO) whose pore walls are nanocoated with HfO2 is presented. Porous CFO films are first prepared by sol-gel. Atomic layer deposition is subsequently used to conformally grow a HfO2 layer at the surface of the pore walls, throughout the thickness of the films. The magnetic properties of uncoated and HfO2-coated CFO mesoporous films are then modulated by applying external voltage, via magneto-ionic effects. The CFO-HfO2 composite films exhibit an enhanced magnetoelectric response. The magnetic moment at saturation of the composite increases 56% upon the application of -50 V (compared to 24% for CFO alone). Furthermore, dissimilar trends in coercivity are observed: after applying -50 V, the coercivity of the composite film increases by 69% while the coercivity of the CFO alone decreases by 25%. The effects can be reversed applying suitable positive voltages. This two-oxide nanocomposite material differs from archetypical magneto-ionic architectures, in which voltage-driven ion migration is induced between fully-metallic and oxide counterparts. The synthesized material is particularly appealing to develop new types of magnetoelectric devices with a highly tunable magnetic response.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael|||0000-0002-4147-6668
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coy, Emerson|||0000-0002-4149-9720
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez-Olivella, Carles|||0000-0002-1656-2951
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Frontera, Carlos|||0000-0002-0091-4756
  • Aballe, Lucía|||0000-0003-1810-8768
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Fina, Ignasi|||0000-0003-4182-6194
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (ΔT* ∼ 20 °C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of pre-defined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhancing magneto-ionic effects in magnetic nanostructured films via conformal deposition of nanolayers with oxygen acceptor/donor capabilities

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Quintana, Alberto|||0000-0002-9813-735X
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Weschke, Eugen
  • Yu, Pengmei
  • Coll, Mariona|||0000-0001-5157-7764
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Effective manipulation of the magnetic properties of nanostructured metallic alloys, exhibiting intergrain porosity (i.e., channels) and conformally coated with insulating oxide nanolayers, with an electric field is demonstrated. Nanostructured Co-Pt films are grown by electrodeposition (ED) and subsequently coated with either AlOx or HfOx by atomic layer deposition (ALD) to promote magneto-ionic effects (i.e., voltage-driven ion migration) during electrolyte gating. Pronounced variations in coercivity (HC) and magnetic moment at saturation (mS) are found at room temperature after biasing the heterostructures. The application of a negative voltage results in a decrease of HC and an increase of mS, whereas the opposite trend is achieved for positive voltages. Although magneto-ionic phenomena are already observed in uncoated Co-Pt films (because of the inherent presence of oxygen), the ALD oxide nanocoatings serve to drastically enhance the magneto-ionic effects because of partially reversible oxygen migration, driven by voltage, across the interface between AlOx or HfOx and the nanostructured Co-Pt film. Co-Pt/HfOx heterostructures exhibit the most significant magneto-electric response at negative voltages, with an increase of mS up to 76% and a decrease of HC by 58%. The combination of a nanostructured magnetic alloy and a skinlike insulating oxide nanocoating is shown to be appealing to enhance magneto-ionic effects, potentially enabling electrolyte-gated magneto-ionic technology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Piezoelectrically enhanced photocatalysis with BiFeO3 nanostructures for efficient water remediation

  • Mushtaq, Fajer
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Hoop, Marcus
  • Torlakcik, Harun
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Gattinoni, Chiara
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Designing new catalysts that can efficiently utilize multiple energy sources can contribute to solving the current challenges of environmental remediation and increasing energy demands. In this work, we fabricated single-crystalline BiFeO3 (BFO) nanosheets and nanowires that can successfully harness visible light and mechanical vibrations and utilize them for degradation of organic pollutants. Under visible light both BFO nanostructures displayed a relatively slow reaction rate. However, under piezocatalysis both nanosheets and nanowires exhibited higher reaction rates in comparison with photocatalytic degradation. When both solar light and mechanical vibrations were used simultaneously, the reaction rates were elevated even further, with the BFO nanowires degrading 97% of RhB dye within 1 hr (k-value 0.058 min-1). The enhanced degradation under mechanical vibrations can be attributed to the promotion of charge separation caused by the internal piezoelectric field of BFO. BFO nanowires also exhibited good reusability and versatility toward degrading four different organic pollutants.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanical properties of particles from the surface of asteroid 25143 Itokawa

  • Tanbakouei, Safoura|||0000-0001-8086-9483
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Sort, Jordi|||0000-0003-1213-3639
  • Michel, Patrick
  • Blum, Jürgen
  • Nakamura, Tomoki
  • Williams, Iwan
Aims. Asteroids have been exposed to impacts since their formation, and as a consequence their surfaces are covered by small particles, pebbles, and boulders. The Japanese JAXA/ISAS Hayabusa mission collected micron-sized particles from the regolith of asteroid 25143 Itokawa. The study in terrestrial laboratories of these particles provides a scientific opportunity as their physical properties can be compared with those characteristic of chondritic meteorites that are often considered proxies of the building materials of potentially hazardous asteroids (PHAs). Methods. Here we present the results from a study of the mechanical properties of three of these particles using a precise technique called nanoindentation. The derived results are compared with those obtained via a methodology similar to that used for the Chelyabinsk meteorite. Results. The reduced Young's modulus values obtained for the Itokawa samples are higher than those measured for the Chelyabinsk chondrite, so these specific particles of asteroid regolith are more compacted than the minerals forming the particular LL chondrite associated with PHAs. This might be a natural consequence of particles surviving long exposure times on the surface of a (near-Earth asteroid) NEA. The Double Asteroid Redirection Test (DART) mission plans to excavate a crater in the surface of the (65803) Didymos satellite. Our results suggest that excavating a crater with a kinetic impactor in an area of significant fine-grained regolith will increase the momentum transfer. As this will facilitate the release of particles carrying target mass in the opposite direction to the movement of the projectile, there is no need to grind up the target during the mechanical excavation phase.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of α-Fe2O3 and Fe-Mn oxide foams with highly tunable magnetic properties by the replication method from polyurethane templates

  • Feng, Yuping
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Zhang, Huiyan
  • Solsona, Pau|||0000-0001-9274-2447
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Open cell foams consisting of Fe and Fe-Mn oxides are prepared from metallic Fe and Mn powder precursors by the replication method using porous polyurethane (PU) templates. First, reticulated PU templates are coated by slurry impregnation. The templates are then thermally removed at 260 °C and the debinded powders are sintered at 1000 °C under N2 atmosphere. The morphology, structure, and magnetic properties are studied by scanning electron microscopy, X-ray diffraction and vibrating sample magnetometry, respectively. The obtained Fe and Fe-Mn oxide foams possess both high surface area and homogeneous open-cell structure. Hematite (α-Fe2O3) foams are obtained from the metallic iron slurry independently of the N2 flow. In contrast, the microstructure of the FeMn-based oxide foams can be tailored by adjusting the N2 flow. While the main phases for a N2 flow rate of 180 L/h are α-Fe2O3 and FeMnO3, the predominant phase for high N2 flow rates (e.g., 650 L/h) is Fe2MnO4. Accordingly, a linear magnetization versus field behavior is observed for the hematite foams, while clear hysteresis loops are obtained for the Fe2MnO4 foams. Actually, the saturation magnetization of the foams containing Mn increases from 5 emu/g to 52 emu/g when the N2 flow rate (i.e., the amount of Fe2MnO4) is increased. The obtained foams are appealing for a wide range of applications, such as electromagnetic absorbers, catalysts supports, thermal and acoustic insulation systems or wirelessly magnetically-guided porous objects in fluids.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of FexCu1-x sputtered thin films electrochemically treated to create nanoporosity for high-surface-area magnetic components

  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Quintana, Alberto|||0000-0002-9813-735X
  • Zhang, Huiyan
  • Menéndez, Enric|||0000-0003-3809-2863
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Sputter deposition is a facile and widely used technique for fabricating thin-film materials. Electrochemical dealloying, on the other hand, is a promising method for creating nanoporosity, and therefore increasing surface area, in metallic materials. Surprisingly, little work has been done on the application of electrochemical dealloying to sputter-deposited thin films. Here, we prepare FexCu1-x thin films by sputter deposition to be then electrochemically treated to create porosity. We investigate the structural and magnetic properties of as-sputtered and electrochemically treated films. We find that the morphology, crystal structure, and magnetic properties are highly dependent on initial film composition. For high copper content films (Fe29Cu71), relative Cu content is found to decrease during the dealloying process. For these films, the crystal structure is not greatly affected by the induced porosity and the porous films show increased saturation magnetization. However, for the more Fe-rich compositions (Fe63Cu37), we find that Fe is preferentially lost and making the films nanoporous induces a crystal structure change from body-centered cubic (bcc) to a mixture of face-centered cubic (fcc) and bccphases. These same porous films show a decrease in saturation magnetization and a large increase in coercivity compared to the as-sputtered films. These films are attractive as high-surface-area magnetic components because of the tunability of their magnetic properties and their high surface area due to porosity. To the best of our knowledge, these results constitute the first example of nanoporous, magnetic thin films by prepared by sputtering and subsequent electrochemical treatment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Martí, Xavier
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Sort, Jordi|||0000-0003-1213-3639
  • Fontcuberta, Josep|||0000-0002-7955-2320
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain-gradient effects in nanoscale-engineered magnetoelectric materials

  • Nicolenco, Aliona|||0000-0003-4624-2163
  • de h-Óra, Muireann|||0000-0002-2070-0755
  • Driscoll, Judith|||0000-0003-4987-6620
  • Sort, Jordi|||0000-0003-1213-3639
Understanding strain gradient phenomena is of paramount importance in diverse areas of condensed matter physics. This effect is responsible for flexoelectricity in dielectric materials, and it plays a crucial role in the mechanical behavior of nanoscale-sized specimens. In magnetoelectric composites, which comprise piezoelectric or ferroelectric (FE) materials coupled to magnetostrictive (MS) phases, the strain gradient can add to any uniform strain that is present to boost the strength of the coupling. Hence, it could be advantageous to develop new types of functionally graded multiferroic composites (for information technologies) or magnetic-field-driven flexoelectric/magnetostrictive platforms for wireless neurons/muscle cell stimulation (in biomedicine). In MS or FE materials with non-fully constrained geometries (e.g., cantilevers, porous layers, or vertically aligned patterned films), strain gradients can be generated by applying a magnetic field (to MS phases) or an electric field (to, e.g., FE phases). While multiferroic composites operating using uniform strains have been extensively investigated in the past, examples of new nanoengineering strategies to achieve strain-gradient-mediated magnetoelectric effects that could ultimately lead to high flexomagnetoelectric effects are discussed in this Perspective.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dynamic electric-field-induced magnetic effects in cobalt oxide thin films, towards magneto-ionic synapses

  • Martins, Sofia|||0000-0002-1801-1651
  • de Rojas, Julius|||0000-0002-1206-4744
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Cialone, Matteo|||0000-0002-3018-2787
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Voltage control of magnetism via electric-field-driven ion migration (magneto-ionics) has generated intense interest due to its potential to greatly reduce heat dissipation in a wide range of information technology devices, such as magnetic memories, spintronic systems or artificial neural networks. Among other effects, oxygen ion migration in transition-metal-oxide thin films can lead to the generation or full suppression of controlled amounts of ferromagnetism ('ON-OFF' magnetic transitions) in a non-volatile and fully reversible manner. However, oxygen magneto-ionic rates at room temperature are generally considered too slow for industrial applications. Here, we demonstrate that sub-second ON-OFF transitions in electrolyte-gated paramagnetic cobalt oxide films can be achieved by drastically reducing the film thickness from.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magneto-ionics in single-layer transition metal nitrides

  • de Rojas, Julius|||0000-0002-1206-4744
  • Salguero, Joaquín
  • Ibrahim, Fatima
  • Chshiev, Mairbek|||0000-0001-9232-7622
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Abad, Llibertat|||0000-0003-2637-8629
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics allows for tunable control of magnetism by voltage-driven transport of ions, traditionally oxygen or lithium and, more recently, hydrogen, fluorine, or nitrogen. Here, magneto-ionic effects in single-layer iron nitride films are demonstrated, and their performance is evaluated at room temperature and compared with previously studied cobalt nitrides. Iron nitrides require increased activation energy and, under high bias, exhibit more modest rates of magneto-ionic motion than cobalt nitrides. Ab initio calculations reveal that, based on the atomic bonding strength, the critical field required to induce nitrogen-ion motion is higher in iron nitrides (≈6.6 V nm -1) than in cobalt nitrides (≈5.3 V nm -1). Nonetheless, under large bias (i.e., well above the magneto-ionic onset and, thus, when magneto-ionics is fully activated), iron nitride films exhibit enhanced coercivity and larger generated saturation magnetization, surpassing many of the features of cobalt nitrides. The microstructural effects responsible for these enhanced magneto-ionic effects are discussed. These results open up the potential integration of magneto-ionics in existing nitride semiconductor materials in view of advanced memory system architectures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage control of magnetism with magneto-ionic approaches, beyond voltage-driven oxygen ion migration

  • de Rojas, Julius|||0000-0002-1206-4744
  • Quintana, Alberto|||0000-0002-9813-735X
  • Rius, Gemma|||0000-0003-0552-1043
  • Stefani, Christina|||0000-0002-8818-075X
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics is an emerging field in materials science where voltage is used as an energy-efficient means to tune magnetic properties, such as magnetization, coercive field, or exchange bias, by voltage-driven ion transport. We first discuss the emergence of magneto-ionics in the last decade, its core aspects, and key avenues of research. We also highlight recent progress in materials and approaches made during the past few years. We then focus on the "structural-ion"approach as developed in our research group in which the mobile ions are already present in the target material and discuss its potential advantages and challenges. Particular emphasis is given to the energetic and structural benefits of using nitrogen as the mobile ion, as well as on the unique manner in which ionic motion occurs in CoN and FeN systems. Extensions into patterned systems and textures to generate imprinted magnetic structures are also presented. Finally, we comment on the prospects and future directions of magneto-ionics and its potential for practical realizations in emerging fields, such as neuromorphic computing, magnetic random-access memory, or micro- and nano-electromechanical systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Lightweight macroporous Co-Pt electrodeposited films with semi-hard-magnetic properties

  • Navarro Senent, Cristina Maria|||0000-0002-7757-0357
  • Eiler, Konrad|||0000-0001-8648-6395
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Macroporous, partially L10-ordered Co-Pt films with nearly equiatomic composition were successfully synthesized by electrodeposition from an aqueous sulfate-chloride electrolyte on colloidal crystal-templated substrates, followed by annealing in vacuum. The colloids deposited on the substrate consisted of amidine-functionalized polystyrene spheres of 215 ± 13 nm in diameter, which were self-assembled by electrophoresis. As-deposited Co-Pt films obtained after the removal of the spheres showed a highly-packed arrangement of macropores. Structurally, the films showed the A1-disordered face-centered cubic (fcc) Co-Pt solid solution, accompanied by small amounts of fcc/hexagonal close-packed (hcp)-Co. Upon annealing at 600 °C, the A1-disordered phase partly transformed into the L10-ordered (face-centered tetragonal, fct) phase. As a result, the coercivity significantly increased from 148 Oe to 1328 Oe. Importantly, the porosity of the films was preserved after annealing. Optimum annealing temperature and time were selected on the basis of a prior parametric study with electroplated dense counterparts. This work demonstrates that the combination of colloidal crystal templating and electrodeposition is a very convenient pathway towards lightweight semi-hard magnets with potential technological applications in automotive and aerospace industries, portable sensors or spectrometers, magnetic levitation systems, or magnetoelectric devices, among others.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanical, magnetic and magnetostrictive properties of porous Fe-Ga films prepared by electrodeposition

  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Chen, Yu|||0000-0001-9890-9551
  • Tsyntsaru, Natalia|||0000-0002-9813-2460
  • Cesiulis, Henrikas|||0000-0002-5077-7884
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Magnetostriction, known as the ability of magnetic materials to expand or contract in response to magnetic field, is a key property of Fe-Ga alloys exploited in various types of transducers. Usually, thin films of Fe-Ga deposited on rigid substrates suffer from a clamping effect that hinders the propagation of strain. Herein, Fe-Ga films with macroporous, not fully constrained, geometry are prepared by electrodeposition on metallized silicon substrates templated with sub-micrometer-sized polystyrene spheres. For comparison, fully-dense and inherently nanoporous films are prepared by sputtering and electrodeposition, respectively. The electrodeposition mechanism is discussed in terms of electrochemically active species distribution and partial current densities. The composition of the Fe-Ga films has been tuned (2-40 at.% Ga) by varying the electrodeposition parameters. A complete assessment of the nanomechanical and magnetic properties of the films with variable composition and porosity has been performed for an optimized performance. The magnetostriction has been studied by X-ray diffraction applying an in-situ magnetic field. The results demonstrate a larger magnetic-field-induced crystal deformation in templated (macroporous) films compared to the non-templated and fully-dense counterparts. The observed effects in porous Fe-Ga films are very appealing for the design of various strain-engineered nanomaterials, e.g., energy transducers or magnetoelectric composites.