Pasar al contenido principal

MICROSOCOPIA DE FOTOEMISION DE OXIDOS PARA PROCESADO DE SEÑALES ULTRARAPIDO Y DE BAJA DISIPACION

RTI2018-095303-B-C53

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CONSORCI PER A LA CONSTRUCCIO, EQUIPAMENT I EXPLOTACIO DEL LABORATORI DE LLUM DE SINCROTO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Néel temperature in an antiferromagnet: the case of NixCo1−xO microstructures

  • Mandziak, Anna
  • Delgado Soria, Guiomar
  • Prieto, J. E.
  • Prieto Recio, Pilar
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
  • AMPHIBIAN Project ID:720853
We show that it is possible to tune the Néel temperature of nickel(II)-cobalt(II) oxide films by changing the Ni to Co ratio. We grow single crystalline micrometric triangular islands with tens of nanometers thickness on a Ru(0001) substrate using high temperature oxygen-assisted molecular beam epitaxy. Composition is controlled by adjusting the deposition rates of Co and Ni. The morphology, shape, crystal structure and composition are determined by low-energy electron microscopy and diffraction, and synchrotron-based x-ray absorption spectromicroscopy. The antiferromagnetic order is observed by x-ray magnetic linear dichroism. Antiferromagnetic domains up to micrometer width are observed., This work is supported by the Spanish Agencia Estatal de Investigación (MCIU/AEI/FEDER, EU)) through Projects Nos MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, RTI2018-095303-B-C51, and RTI2018-095303-B-C53, by the European Commission through Project H2020 No. 720853 (Amphibian) and by the Comunidad de Madrid through Project. NANOMAGCOST-CM P2018/NMT-4321. These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. A.M. acknowledges funding via a CSIC-Alba agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A real-time XAS PEEM study of the growth of cobalt iron oxide on Ru(0001)

  • AMPHIBIAN Project ID:720853
  • Ruiz-Gómez, Sandra
  • Mandziak, Anna
  • Prieto, J. E.
  • Aristu, M.
  • Trapero, E. M.
  • Delgado Soria, Guiomar
  • Quesada, Adrián
  • Foerster, M.
  • Aballe, Lucía
  • de la Figuera, Juan
[EN] The growth of mixed cobalt-iron oxides on Ru(0001) by high-temperature oxygen-assisted molecular beam epitaxy has been monitored in real time and real space by x-ray absorption photoemission microscopy. The initial composition is a mixed Fe–Co(II) oxide wetting layer, reflecting the ratio of the deposited materials. However, as subsequent growth of three dimensional spinel islands nucleating on this wetting layer takes place, the composition of the oxide in the wetting layer changes as iron is transferred into the spinel islands. The composition of the islands themselves also changes during growth., This work was supported by the Spanish Ministry of Science, Innovation and Universities through Project Nos. RTI2018-095303-B-C51, RTI2018-095303-B-C52, and RTI2018-095303-BC53 (MCIU/AIE/FEDER, EU), by the European Commission through H2020 Project No. 720853 (Amphibian), by the CSIC PIE Project No. 190344, and by the Regional Government of Madrid through Project No. P2018/NMT-4321 (NANOMAGCOST). These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. A.M. acknowledges support from the CSIC–ALBA agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation and Imaging of Magnetoacoustic Waves over Millimeter Distances

  • Casals, Blai
  • Statuto, Nahuel
  • Foerster, Michael
  • Hernández Mínguez, Alberto
  • Cichelero, Rafael
  • Manshausen, Peter
  • Mandziak, Anna
  • Aballe, Lucía
  • Hernández, Joan Manel
  • Macià, Ferran
Using hybrid piezoelectric-magnetic systems we have generated large amplitude magnetization waves mediated by magnetoelasticity with up to 25 degrees variation in the magnetization orientation. We present direct imaging and quantification of both standing and propagating acoustomagnetic waves with different wavelengths, over large distances up to several millimeters in a nickel thin film., The authors acknowledge Jordi Prat of ALBA for his help during experiments. F. M. acknowledges support from the MINECO through Grant No. RYC-2014-16515. F. M., B. C., and R. C. acknowledge support from MINECO through Grants No. SEV-2015-0496 and No. MAT2017- 85232-R. F. M., J. M. H., and N. S. acknowledge funding from MINECO through Grant No. MAT2015-69144-P. We thank Werner Seidel and Sander Rauwerdink from PDI for assistance in the preparation of acoustic delay lines on LiNbO3. L. A. and M. F. acknowledge support from MINECO through RTI2018-095303-B-C53. This project was partially supported by the ALBA in-house research program through Projects No. ALBA-IH2015PEEM and ALBAIH2017PEEM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael
  • Menéndez, Enric
  • Coy, Emerson
  • Quintana, Alberto
  • Gómez Olivella, Carles
  • Esqué de los Ojos, Daniel
  • Vallcorba, Oriol
  • Frontera, Carlos
  • Aballe, Lucía
  • Nogués, Josep
  • Sort, Jordi
  • Fina, Ignasi
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (DT* B 20 8C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of predefined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices., Dr Patxi Lopez-Barbera is acknowledged for his assistance with the MOKE experiments. Vicente Garcia-Juez from Real Casa de la Moneda – Fabrica Nacional de Moneda y Timbre is acknowledged for his scientific advice. Dr Florencio Sa´nchez is acknowledged for the growth of the samples. Dr Bernat Bozzo is acknowledged for the electric transport characterization. ALBA synchrotron is acknowledged for the provision of beamtime at the MSPD (proposal number 2017092412) and CIRCE (proposal numbers 2017092462 and 2018022818) beamlines. Financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706) and the MAT2017-85232-R, RTI2018-095303-B-C53. MAT2014-56063-C2-1-R, MAT2017-86357-C3-1-R (and associated FEDER) and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2014 SGR 734 and 2017 SGR 292), AGAUR (2018 LLAV 00032 and 2019 LLAV 00050) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. This work was supported by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454 and the MAGICSWITCH 2019-Proof of Concept Grant, Agreement No. 875018. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. I. F. acknowledges his RyC contract RYC-2017-22531. E. C. acknowledges the partial financial support from the National Science Centre of Poland (NCN) by the PRELUDIUM project UMO-2015/17/N/ST5/01988 and the SONATA Project No. UMO-2016/23/D/ST3/02121., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the growth conditions on the magnetism of SrFe12O19thin films and the behavior of Co/SrFe12O19bilayers

  • Delgado Soria, Guiomar
  • Marco, J.F.
  • Mandziak, Anna
  • Sánchez-Cortés, Santiago
  • Sánchez-Arenillas, M.
  • Prieto, J. E.
  • Dávalos, J.Z.
  • Foerster, M.
  • Aballe, Lucía
  • López-Sánchez, Jesús
  • Guzmán-Mínguez, J. C.
  • Granados-Miralles, Cecilia
  • de la Figuera, Juan
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
11 pags., 12 figs. 1 tab., SrFe12O19 (SFO) films grown on Si (100) substrates by radio-frequency magnetron sputtering have been characterized in terms of composition, structural and magnetic properties by a combination of microscopy, diffraction and spectroscopy techniques. Mössbauer spectroscopy was used to determine the orientation of the films magnetization, which was found to be controlled by both the sputtering power and the thickness of the films. Additionally, the coupling between the SFO films and a deposited cobalt overlayer was studied by means of synchrotron-based spectromicroscopy techniques. A structural coupling at the SFO/Co interface is suggested to account for the expetimental observations. Micromagnetic simulations were performed in order to reproduce the experimental behaviour of the system., This work is supported by the Spanish Ministry of Science, Innovation and Universities through Projects RTI2018- 095303-B-C51, RTI2018-095303-B-C53 and RTI2018- 095303-A-C52 (MCIU/AIE/FEDER,EU) and by the European Comission through Project H2020 No. 720853 (Amphibian) and by the Regional Government of Madrid through project S2018-NMT-4321. C.G-M. acknowledges financial support from MICINN through the “Juan de la Cierva” program (FJC2018-035532-I). Technical support of the technical staff of CIRCE beamline of the ALBA Synchrotron Light Facility is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining high temperature sample preparation and in-situ magnetic fields in XPEEM

  • Mandziak, Anna
  • de la Figuera, Juan
  • Prieto, J. E.
  • Prat, Jordi
  • Foerster, Michael
  • Aballe, Lucía
  • AMPHIBIAN Project ID:720853
5 pags., 5 figs., We present a custom-made sample holder system for use in Elmitec Low Energy and PhotoEmission Electron Microscopes. It consists of two different sample holder bodies: one with a filament for high temperature measurements (up to more than 1500 K) and the other with integrated electromagnets for the in-situ application of in-plane/out-of-plane small magnetic fields. The sample is placed on a platelet which can be transferred between the two holders. This opens up new possibilities for the preparation of samples at high temperatures and investigation of their behavior under applied magnetic fields without leaving the ultra high vacuum system., This work is supported by the Spanish Agencia Estatal deInvestigación (AEI) through Projects no. MAT2015-64110-C2-1-P,MAT2015-64110-C2-2-P, RTI2018-095303-B-C51, and RTI2018-095303-B-C53, by the European Commission through Project H2020no. 720853 (Amphibian) and by the Comunidad de Madrid throughProject. NANOMAGCOST-CM P2018/NMT-4321. These experimentswere performed at the CIRCE beamline of the ALBA Synchrotron LightFacility. A. M. acknowledges funding via a CSIC-Alba agreement.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Different spin axis orientation and large antiferromagnetic domains in Fe-doped NiO/Ru(0001) epitaxial films

  • Mandziak, Anna
  • Delgado Soria, Guiomar
  • Prieto, J. E.
  • Foerster, Michael
  • de la Figuera, Juan
  • Aballe, Lucía
  • AMPHIBIAN Project ID:720853
9 pags., 7 figs., We present a spatially resolved X-ray magnetic dichroism study of high-quality, in situ grown nickel oxide films. NiO thin films were deposited on a Ru(0001) substrate by high temperature oxygen-assisted molecular beam epitaxy. We found that by adding a small amount of Fe, the growth mode can be modified in order to promote the formation of micron-sized, triangular islands. The morphology, shape, crystal structure and composition are determined by low-energy electron microscopy and diffraction, and synchrotron based X-ray absorption spectromicroscopy. The element specific XMLD measurements reveal strong antiferromagnetic contrast at room temperature and domains with up to micron sizes, reflecting the high structural quality of the islands. By means of vectorial magnetometry, the spin axis orientation was determined with nanometer spatial resolution, and found to depend on the relative orientation of the film and substrate lattices., This work is supported by the Spanish Agencia Estatal de Investigación (AEI) through Projects No. MAT2015-64110-C2-1- P, MAT2015-64110-C2-2-P, RTI2018-095303-B-C51, and RTI2018-095303-B-C53, by the European Commission through Project H2020 No. 720853 (Amphibian) and by the Comunidad de Madrid through Project. NANOMAGCOST-CM P2018/ NMT-4321. These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. A. M. acknowledges funding via a CSIC-Alba agreement.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Helical surface magnetization in nanowires: The role of chirality

  • Ruiz-Gómez, Sandra
  • Fernández-González, C.
  • Martínez, E.
  • Raposo, V.
  • Sorrentino, A.
  • Foerster, M.
  • Aballe, Lucía
  • Mascaraque, Arantzazu
  • Ferrer, Salvador
  • Pérez, Lucas
6 pags., 3 figs., Nanomagnetism is nowadays expanding into three dimensions, triggered by the discovery of new magnetic phenomena and their potential use in applications. This shift towards 3D structures should be accompanied by strategies and methodologies to map the tridimensional spin textures associated. We present here a combination of dichroic X-ray transmission microscopy at different angles and micromagnetic simulations allowing to determine the magnetic configuration of cylindrical nanowires. We have applied it to permalloy nanowires with equispaced chemical barriers that can act as pinning sites for domain walls. The magnetization at the core is longitudinal and generates at the surface of the wire helical magnetization. Different types of domain walls are found at the pinning sites, which respond differently to applied fields depending on the relative chirality of the adjacent domains., This work is supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through projects MAT2017- 87072-C4-1-P, MAT2017-87072-C4-2-P and RTI2018-095303- B-C53, the Comunidad de Madrid through Project NANOMAGCOST-CM P2018/NMT-4321 and by Consejería de Educación of Castilla y León through project SA299P18. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). SRG acknowledges MINECO for FPI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible Antiferromagnetic FeRh Tapes as Memory Elements

  • Fina, Ignasi
  • Dix, Nico
  • Menéndez, Enric
  • Crespi, Anna
  • Foerster, Michael
  • Aballe, Lucía
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
The antiferromagnetic to ferromagnetic transition occurring above room temperature in FeRh is attracting interest for applications in spintronics, with perspectives for robust and untraceable data storage. Here, we show that FeRh films can be grown on a flexible metallic substrate (tape shaped), coated with a textured rock-salt MgO layer, suitable for large-scale applications. The FeRh tape displays a sharp antiferromagnetic to ferromagnetic transition at about 90 °C. Its magnetic properties are preserved by bending (radii of 300 mm), and their anisotropic magnetoresistance (up to 0.05%) is used to illustrate data writing/reading capability., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the RTI2018-095303-B-C53, MAT2017-85232-R, and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2017 SGR 1377) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no 665919 is acknowledged. I.F. acknowledges RyC contract RYC-2017-22531. M. Vilardell is acknowledged for advice in XRD characterization. Patxi López-Barberá is acknowledged for assistance in MOKE experiments. J. Oró for technical assistance in SEM characterization. We thank J. Nogués for the use of the MOKE equipment. V. García-Juez from Real Casa de la Moneda—Fábrica Nacional de Moneda y Timbre is acknowledged for scientific advice. Theva Dünnschichttechnik GmbH is acknowledged for providing the flexible substrates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Promotion of Catalytic Reactions by Surface Acoustic Waves

  • Boehn, Bernhard von
  • Foerster, Michael
  • Boehn, Moritz von
  • Prat, Jordi
  • Macià, Ferran
  • Casals, Blai
  • Khaliq, Muhammad W.
  • Hernández Mínguez, Alberto
  • Aballe, Lucía
  • Imbihl, Ronald
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis, sensor and nanotechnology. SAWs were shown to cause a strong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However, the promotion mechanism has not been unambiguously identified. Using stroboscopic X‐ray photoelectron spectro‐microscopy, we were able to evidence a sub‐nanosecond work function change during propagation of 500 MHz SAWs on a 9 nm thick platinum film. We quantify the work function change to 455 μeV. Such a small variation rules out that electronic effects due to elastic deformation (strain) play a major role in the SAW‐induced promotion of catalysis. In a second set of experiments, SAW‐induced intermixing of a five monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be a major cause for catalytic promotion., The authors thank Werner Seidel for technical support in the fabrication of the IDTs, Rolf J. Haug, Hannover, for help in preparation of the samples, and Leo Zhigilei for carefully reading the manuscript. The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. LA and MF acknowledge support from Spanish MINECO through Grant No. RTI2018‐095303‐B‐C53. FM and BC acknowledges support from Spanish MINECO through Grants No. RYC‐2014‐16515, No. MAT2015‐69144‐P, No. SEV‐2015‐0496 and No. MAT2017‐85232‐R. Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting the coercivity of SrFe12O19 nanocrystalline powders obtained using the citrate combustion synthesis method

  • Guzmán-Mínguez, J. C.
  • Moreno Arche, L.
  • Granados-Miralles, Cecilia
  • López-Sánchez, Jesús
  • Marín, Pilar
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
Strontium hexaferrite nanocrystalline powders were synthesized using a citrate combustion method and subsequently subjected to post-synthesis processing with the aim of tuning the micro-nanostructure to improve the magnetic properties. Firstly, the synthesis thermal treatments were optimized in order to minimize the formation of secondary phases, mainly hematite. Secondly, the as-synthesized powders were conditioned by a two-step process: ball milling in wet medium (ethanol) and high-speed mixing. The final processed powders exhibited a saturation magnetization of 74 emu g-1 and a coercivity of 6450 Oe. Following a low-temperature combustion synthesis, the coercivity is one of the largest values reported for strontium ferrites. The combination of the two-step conditioning procedure results in a useful methodology to obtain SrFe12O19 nanocrystalline powders with competitive properties. The morphological, structural and magnetic properties of the processed material make it a promising candidate for hard-soft ferrite-based composite magnets, where large coercivity values are highly desirable., This work is supported by the Spanish Ministerio de Ciencia e Innovación through Project Nos. MAT2017-86450-C4-1-R, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52, and FIS2017-82415-R and through the Ramón y Cajal Contract RYC-2017-23320; and by the European Commission through Project H2020 No. 720853 (AMPHIBIAN). The work is funded as well by the Regional Government of Madrid through Project S2018/NMT-4321 (NANOMAGCOST). C G-M acknowledges financial support from MICINN through the ‘Juan de la Cierva’ Program (FJC2018-035532-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uncorrelated magnetic domains in decoupled SrFe12O19/Co hard/soft bilayers

  • Delgado Soria, Guiomar
  • Granados-Miralles, Cecilia
  • Mandziak, Anna
  • Jenus, P.
  • Saura-Múzquiz, Matilde
  • Christensen, Mogens
  • Foerster, Michael
  • Aballe, Lucía
  • Fernández Lozano, José Francisco
  • de la Figuera, Juan
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
8 pags., 5 figs., Composites of magnetically hard and soft phases are present in multiple and diverse applications, ranging from bulk permanent magnets in motors and generators to state-of-the-art recording media devices. The nature of the magnetic coupling between the hard and soft phases is of great technological relevance, as the macroscopic properties of the functional composite material ultimately depend on the atomic-scale interactions between phases. In this work, the hard/soft bilayer system SrFeO/Co has been studied based on photoemission electron microscopy combined with x-ray absorption and magnetic circular dichroism. Our experiments show that the magnetization of the hard magnetic oxide has a direction perpendicular to the layer plane, whereas the magnetization of the soft metallic overlayer remains in-plane. As a consequence, the magnetic domain patterns observed for the hard and soft phases are very different and completely uncorrelated to one another, indicating that no soft spins align with the hard phase by pure magnetodipolar arguments. The results are understood as the consequence of an absence of exchange-coupling between phases, in a scenario in which the shape anisotropy of the soft layer overcomes the Zeeman energy of the perpendicular magnetic field generated by the hard ferrite. Micromagnetic simulations of our system predict that low degrees of exchange-coupling effectively prevent substantial softening of the composite and lead to the alignment of soft and hard magnetic moments. A strategy thus emerges for the development of future hard-soft magnets, based on minimizing the degree of exchange-coupling while avoiding complete uncoupling., This work is supported by the Spanish Ministerio de Economía y Competitividad (MINECO) through Projects no. MAT2017-86450-C4-1-R, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52, and FIS2017-82415-R and by the European Comission through Project H2020 no. 720853 (AMPHIBIAN). The work is funded as well by the Regional Government of Madrid through Project S2018/NMT-4321 (NANOMAGCOST). C.G.-M. acknowledges financial support from Spanish Ministerio de Ciencia e Innovación (MICINN) through the 'Juan de la Cierva' Program (FJC2018-035532-I). Spanish Ministerio de Economía y Competitividad (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scaling up the production of electrodeposited nanowires: A roadmap towards applications

  • Fernández-González, Claudia
  • Guzmán-Mínguez, J. C.
  • Guedeja-Marrón, A
  • García-Martín, Eduardo
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Aballe, Lucía
  • Quesada, Adrián
  • Pérez, Lucas
  • Ruiz-Gómez, Sandra
  • AMPHIBIAN Project ID:720853
11 pags., 5 figs., 1 tab. -- This article belongs to the Special Issue Multifunctional Magnetic Nanowires and Nanotubes, The use of metallic nanowires is mostly reduced to scientific areas where a small quantity of nanostructures are needed. In order to broaden the applicability of these nanomaterials, it is necessary to establish novel synthesis protocols that provide a larger amount of nanowires than the conventional laboratory fabrication processes at a more competitive cost. In this work, we propose several modifications to the conventional electrochemical synthesis of nanowires in order to increase the production with considerably reduced production time and cost. To that end, we use a soft anodization procedure of recycled aluminum at room temperature to produce the alumina templates, followed by galvanostatic growth of CoFe nanowires. We studied their morphology, composition and magnetic configuration, and found that their properties are very similar to those obtained by conventional methods., This research was partially funded by the Spanish Agencia Estatal de Investigación through projects MAT2017-87072-C4-2-P and RTI2018-095303-B-C53, by The Ministerio de Ciencia y Universidades through project RTI2018-095303-A-C52, through the Ramón y Cajal Contract RYC2017-23320, The European Commission through the H2020 Project No. 720853 (AMPHIBIAN) and by the Comunidad de Madrid through Project NANOMAGCOST-CM P2018/NMT-4321.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Noncollinear magnetic order in two-dimensional NiBr2 films grown on Au(111)

  • Bikaljević, Duro
  • González-Orellana, Carmen
  • Peña-Díaz, Marina
  • Steiner, Dominik
  • Dreiser, Jan
  • Gargiani, Pierluigi
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Aballe, Lucía
  • Ruiz-Gomez, Sandra
  • Friedrich, Niklas
  • Hieulle, Jeremy
  • Jingcheng, Li
  • Ilyn, Max
  • Rogero, Celia
  • Pascual, José I.
Metal halides are a class of layered materials with promising electronic and magnetic properties persisting down to the two-dimensional limit. While most recent studies focused on the trihalide components of this family, the rather unexplored metal dihalides are also van der Waals layered systems with distinctive magnetic properties. Here we show that the dihalide NiBr2 grows epitaxially on a Au(111) substrate and exhibits semiconducting and magnetic behavior starting from a single layer. Through a combination of a low-temperature scanning-tunneling microscopy, low-energy electron diffraction, X-ray photoelectron spectroscopy, and photoemission electron microscopy, we identify two competing layer structures of NiBr2 coexisting at the interface and a stoichiometrically pure layer-by-layer growth beyond. Interestingly, X-ray absorption spectroscopy measurements revealed a magnetically ordered state below 27 K with in-plane magnetic anisotropy and zero-remanence in the single layer of NiBr2/Au(111), which we attribute to a noncollinear magnetic structure. The combination of such two-dimensional magnetic order with the semiconducting behavior down to the 2D limit offers the attractive perspective of using these films as ultrathin crystalline barriers in tunneling junctions and low-dimensional devices., D.B. acknowledges funding from the Austrian Science Fund (FWF) under the Erwin Schrödinger fellowship agreement (project number: J4395-N). C.G.-O. and M.P.-D. acknowledge funding of the Ph.D. fellowship from the MPC Foundation. We gratefully acknowledge financial support from Spanish AEI (Grant Nos. PID2019-107338RB-C6, RTI-2018-095303-C53, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618) and from the European Union (EU) through Horizon 2020 (SUPERTED Grant No. 800923), from Interred POCTEFA V-A Spain/France/Andorra Program (EFA 194/16/TNSI), the Basque Government (GV/EJ) under grants IT-1255-19, and the European Regional Development Fund. P.G. acknowledges funding from MINECO Grant No. FIS2016-78591-C3-2-R and FLAG-ERA Grant No. PCI2019-111908-2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Efectos del procesamiento cerámico y la adición de nanohilos de FeCo en la obtención de diferentes tipos de imanes permanentes de ferrita más sostenibles y mejorados.

  • Guzmán-Mínguez, J. C.
  • AMPHIBIAN Project ID:720853
La realización de este trabajo ha sido posible gracias a la financiación del Ministerio de Ciencia e Innovación de España a través de los Proyectos no. MAT2017-86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, MAT2017-87072-C4-2-P, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52 y FIS2017-82415-R y a través del Contrato Ramón y Cajal RYC-2017-23320; y por la Comisión Europea a través del Proyecto H2020 nº 720853 (AMPHIBIAN). El trabajo está financiado también por la Comunidad de Madrid a través del Proyecto S2018/NMT-4321 (NANOMAGCOST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic domain wall pinning in cobalt ferrite microstructures

  • Ruiz-Gómez, Sandra
  • Mandziak, Anna
  • Martín-García, Laura
  • Prieto, J. E.
  • Prieto, Pilar
  • Munuera, C.
  • Foerster, Michael
  • Quesada, Adrián
  • Aballe, Lucía
  • de la Figuera, Juan
9 pags., 3 figs., A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared with micromagnetic simulations, revealing the presence of defects which pin the magnetic domain walls. A comparison of different types of defects and the domain walls location suggests that the main source of pinning in these microcrystals are linear structural defects induced in the spinel by the substrate steps underneath the islands., This work is supported by the Grants RTI2018-095303-B-C51,-A- 52, and -B-C53 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’, and by the Grant S2018-NMT-4321 funded by the Comunidad de Madrid and by ‘‘ERDF A way of making Europe’’. Sandra Ruiz-Gómez gratefully acknowledges the financial support of the Alexander von Humboldt foundation. These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth and characterization of ultrathin cobalt ferrite films on Pt(111)

  • Delgado Soria, Guiomar
  • Freindl, K.
  • Prieto, J. E.
  • Quesada, Adrián
  • de la Figuera, Juan
  • Spiridis, N.
  • Korecki, J.
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
9 pags., 8 figs., 2 tabs., CoFeO thin films (5 nm and 20 nm thick) were grown by oxygen assisted molecular beam epitaxy on Pt(111) at 523 K and subsequently annealed at 773 K in vacuum or oxygen. They were characterized in-situ using Auger Electron Spectroscopy, Low-Energy Electron Diffraction, Scanning Tunneling Microscopy and Conversion Electron Mössbauer Spectroscopy. The as-grown films were composed of small, nanometric grains. Annealing of the films produced an increase in the grain size and gave rise to magnetic order at room temperature, although with a fraction of the films remaining in the paramagnetic state. Annealing also induced cobalt segregation to the surface of the thicker films. The measured Mössbauer spectra at low temperature were indicative of cobalt ferrite, the both films showing very similar hyperfine patterns. Annealing in oxygen or vacuum affected the cationic distribution, which was closer to that expected for an inverse spinel in the case of annealing in an oxygen atmosphere., This work is supported by the Spanish Ministry of Science and Innovation through Projects RTI2018-095303-B-C51, RTI2018-095303- B-C53, MAT2017-86450-C4-1-R, RTI2018-095303-A-C52, through the Ramón Cajal Contract RYC-2017-23320 and RTI2018-095303-C52 (MCIU/AIE/FEDER,EU), by the Regional Government of Madrid through project S2018-NMT-4321 and by the PROM Programme - International scholarship exchange of Ph.D. students and academics; and by the European Commission through the H2020 Project no. 720853 (AMPHIBIAN), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of annealing in the formation of well-crystallized and textured SrFe12O19 films grown by RF magnetron sputtering

  • Delgado Soria, Guiomar
  • Serrano, A.
  • Prieto, J. E.
  • Quesada, Adrián
  • Gorni, Giulio
  • de la Figuera, Juan
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
10 pags., 7 figs., 4 tabs., We have studied the influence of the annealing treatment on the crystalline growth of SrFe12O19 previously deposited on Si (100) substrates using radio frequency (RF) magnetron sputtering. For this goal, two grown films, with and without ex situ heating step, have been analyzed and compared to determine the differences in their structural, compositional, and magnetic properties. The results obtained by the different analysis techniques, in particular Mössbauer spectroscopy together with EXAFS and XANES data, suggest that the as-grown film is composed of nanocrystalline maghemite nanoparticles and amorphous strontium oxide. Specifically, Mössbauer spectroscopy results pointed out the presence of Fe3+ cations occupying octahedral and tetrahedral sites with hyperfine magnetic fields 49.3 T and 44.2 T, respectively, characteristic of a spinel-related structure. A strontium hexaferrite canonical structure with a c-axis orientation in the sample plane was found for the annealed film. Graphical abstract: [Figure not available: see fulltext.]., This work is supported by the Grants TED2021-130957B-C54, RTI2018-095303-B-C51, -A-C52 and -B-C53 , MAT2017-86450-C4-1-R funded by MCIN/AEI/10.13039/501100011033 by European Union NextGenerationEU/PRTR and by “ERDF A way of making Europe”, by the Grant S2018-NMT-4321 funded by the Comunidad de Madrid and by “ERDF A way of making Europe”, by the Ramon y Cajal Contract RYC-2017-23320 and by the European Commission through the H2020 Project no.720853 (AMPHIBIAN). We gratefully acknowledge the support from CMAM for the beamtime proposal with code STD009/20. Part of these experiments were performed at the CLAESS-BL22 beamline at ALBA Synchrotron and in collaboration with ALBA staf. A.S. acknowledges fnancial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract No. 2017-t2/IND539. We thank Dr S. Cortés for providing access to the Raman spectrometer and for his help in recording these data. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Size Effects in the Verwey Transition of Nanometer-Thick Micrometer-Wide Magnetite Crystals

  • Campo, Ángel Adolfo del
  • Ruiz-Gómez, Sandra
  • Trapero, E. M.
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Foerster, Michael
  • Aballe, Lucía
  • Prieto, J. E.
  • de la Figuera, Juan
8 pages, 5 figures, 2 tables, We have monitored the Verwey transition in micrometer-wide, nanometer-thick magnetite islands on epitaxial Ru films on Al2O3(0001) using Raman spectroscopy. The islands have been grown by high-temperature oxygen-assisted molecular beam epitaxy. Below 100 K and for thicknesses above 20 nm, the Raman spectra correspond to those observed in bulk crystals and high-quality thin films for the sub-Verwey magnetite structure. At room temperature, the width of the cubic phase modes is similar to the best reported for bulk crystals, indicating a similar strength of electron-phonon interaction. The evolution of the Raman spectra upon cooling suggests that for islands thicker than 20 nm, structural changes appear first at temperatures starting at 150 K while the Verwey transition itself takes place at around 115 K. However, islands thinner than 20 nm show very different Raman spectra, indicating that while a transition takes place, the charge order of the ultrathin islands differs markedly from their thicker counterparts., This work was supported by Grants RTI2018-095303-B-C51, -A-C52, and -B-C53 funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe”, by Grant S2018-NMT-4321 funded by the Comunidad de Madrid, and by “ERDF A way of making Europe”. S.R.-G. thanks the Alexander von Humboldt Foundation for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct X-Ray Detection of the Spin Hall Effect in CuBi

  • Ruiz-Gómez, Sandra
  • Guerrero, Rubén
  • Khaliq, Muhammad W.
  • Fernández-González, Claudia
  • Prat, Jordi
  • Valera, Andrés
  • Finizio, Simone
  • Perna, Paolo
  • Camarero, Julio
  • Pérez, Lucas
  • Aballe, Lucía
  • Foerster, Michael
13 pags., 12 figs., 8 apps. -- Subject Areas: Condensed Matter Physics, Spintronics, The spin Hall effect and the inverse spin Hall effect are important spin-charge conversion mechanisms. The direct spin Hall effect induces a surface spin accumulation from a transverse charge current due to spin-orbit coupling even in nonmagnetic conductors. However, most detection schemes involve additional interfaces, leading to large scattering in reported data. Here we perform interface-free x-ray spectroscopy measurements at the Cu L3,2 absorption edges of highly Bi-doped Cu (Cu95Bi5). The detected x-ray magnetic circular dichroism signal corresponds to an induced magnetic moment of (2.2±0.5)×10-12 μB A-1 cm2 per Cu atom averaged over the probing depth, which is of the same order of magnitude as found for Pt measured by magneto-optics. The results highlight the importance of interface-free measurements to assess material parameters and the potential of CuBi for spin-charge conversion applications., This work has been partially funded by MCIN/AEI/10.13039/501100011033 through Projects No. FIS2016-78591-C3-1-R, No. MAT2017-87072-C4-2-P, No. RTI2018-097895-BC42, No. RTI2018-095303-B-C53, and No. PID2020–117024GB-C43 and by the Comunidad de Madrid through Project No. NANOMAGCOST-CM P2018/NMT-4321. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (Grants No. SEV-2016-0686 and No. CEX2020-001039-S). The work has been supported by the ALBA inhouse research program. We thank the Spanish National Center of Electron Microscopy for Scanning Electron Microscopy measurements. M. W. K. acknowledges funding from Horizon 2020 Marie Skłodowska-Curie COFUND DOC-FAM, with Grant agreement No. 754397., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Platform for Addressing Individual Magnetite Islands Grown Epitaxially on Ru(0001) and Manipulating Their Magnetic Domains

  • Ruiz-Gómez, Sandra
  • Trapero, E. M.
  • Fernández-González, Claudia
  • Campo, Ángel Adolfo del
  • Granados-Miralles, Cecilia
  • Prieto, J. E.
  • Khaliq, Muhammad W.
  • Niño, Miguel Ángel
  • Foerster, M.
  • Aballe, Lucía
  • de la Figuera, Juan
[EN] We have grown high-quality magnetite micrometric islands on ruthenium stripes on sapphire through a combination of magnetron sputtering (Ru film), high-temperature molecular beam epitaxy (oxide islands), and optical lithography. The samples have been characterized by atomic force microscopy, Raman spectroscopy, X-ray absorption and magnetic circular dichroism in a photoemission microscope. The magnetic domains on the magnetite islands can be modified by the application of current pulses through the Ru stripes in combination with magnetic fields. The modification of the magnetic domains is explained by the Oersted field generated by the electrical current flowing through the stripes underneath the magnetite nanostructures. The fabrication method is applicable to a wide variety of rock salt and spinel oxides., Grants PID2021-124585NB-C31; RTI2018-095303-B-C51; RTI2018-095303-B-C53; TED2021-130957B-C54 fundedby MCIN/AEI/10.13039/501100011033,by “ERDFA wayof making Europe”,by the”European Union Next GenerationEU/PRTR”,an by theGrantS 2018-NMT-4321fundedby the Comunidad de Madrid and by “ERDFA wayof making Europe”.RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the“European Union Next Generation EU/PRTR”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Motion of magnetic domain walls and vortices in epitaxial magnetite microstructures

  • Mandziak, Anna
  • Aristu, M.
  • Prieto, J. E.
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
6 pags., 4 figs., We report on the response of magnetic domains in thin magnetite microstructures to weak external magnetic fields. Magnetite islands were grown by high-temperature oxygen-assisted molecular beam epitaxy on Ru(0001). The islands, micrometric wide and tens of nanometers thick are of high structural quality, each having been grown from a single nucleation center. Their magnetic domain structure is dominated by shape anisotropy, i.e., they present Landau flux-closure domain configurations. The magnetic domains of the in situ grown microstructures have been imaged directly by means of x-ray magnetic circular dichroism in photoemission electron microscopy while applying external, in-plane magnetic fields along different directions. Upon application of an external field the Landau state vortex core experiences a displacement along a direction perpendicular to the excitation field. The behavior of the Landau state under the applied magnetic field is quantified and compared with micromagnetic simulations. The results highlight the bulk-like magnetic properties of the nanometer-thick microstructures, opening the way to their possible use in technological applications., This work is supported by Projects No. RTI2018-095303-B-C51, and RTI2018-095303-B-C53 and PID2021-124585NB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and by the Comunidad de Madrid, Spain through Project. NANOMAGCOST-CM P2018/NMT-4321. These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. A. M. acknowledges funding via a CSIC-Alba agreement, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the Origin of Multidomain Structures in Compositionally Modulated Cylindrical Magnetic Nanowires

  • Bran, Cristina
  • Fernández-Roldán, José A.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Chen, Y. S.
  • Zhang, Junli
  • Zhang, Xixiang
  • Fraile Rodríguez, A.
  • Foerster, Michael
  • Aballe, Lucía
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
[EN] CoNi/Ni multisegmented cylindrical nanowires were synthesized via an electrochemical route. The wires are 140 nm in diameter, with 1000 nm long Ni segments and CoNi segments between 600 and 1400 nm in length. The magnetic configuration was imaged by XMCD-PEEM in the demagnetized state and at remanence after magnetizing axially and perpendicularly. Ni segments, with cubic crystal symmetry, show an axial magnetic configuration with a small curling component at the surface. In turn, CoNi segments, with hexagonal crystal symmetry and a strong magnetocrystalline anisotropy perpendicular to the nanowires, show a single vortex state in the shorter segments and multivortex or multitransverse magnetic configurations in medium and long segments, respectively. A detailed study by micromagnetic simulations reveals that the magnetic configuration is determined mainly by the coupling between soft Ni and harder CoNi segments. For short CoNi segments, Ni segments are magnetostatically coupled and the chirality of the single vortex formed in CoNi remains the same as that of the curling in neighboring Ni segments. For longer CoNi segments, the remanent state is either the multivortex or multitransverse state depending on whether the previously applied field was parallel or perpendicular to the magnetocrystalline axis. The results point out the relevance of the cylindrical geometry to promote the occurrence of complex magneto-chiral effects and provide key information for the design of cylindrical magnetic nanowires for multiple applications., Support ofSpanish MINECO under Projects MAT2016-76824-C3-1-Rand FIS2016-78591-C3-3-R and the Regional Government of Madrid under Project S2018/NMT-4321 NANOMAGCOST-CM. L.A. and M.F. acknowledge funding through Project RTI2018-095303-B-C53. A.F.R. acknowledges support fromthe Spanish MINECO (Project MAT2015-68772-P). We alsoacknowledge the service from the MiNa Laboratory at IMNand funding from CM (Project SpaceTec, S2013/ICE2822),MINECO (Project CSIC13-4E-1794), and EU (FEDER,FSE), The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.0c03579, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic vs. deterministic magnetic coding in designed cylindrical nanowires for 3D magnetic networks

  • Bran, Cristina
  • Saugar, Elías
  • Fernández-Roldán, José A.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Aballe, Lucía
  • Foerster, Michael
  • Fraile Rodríguez, A.
  • Palmero, Ester M.
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
[EN] Advances in cylindrical nanowires for 3D information technologies profit from intrinsic curvature that introduces significant differences with regards to planar systems. A model is proposed to control the stochastic and deterministic coding of remanent 3D complex vortex configurations in designed multilayered (magnetic/non-magnetic) cylindrical nanowires. This concept, introduced by micromagnetic simulations, is experimentally confirmed by magnetic imaging in FeCo/Cu multilayered nanowires. The control over the random/deterministic vortex states configurations is achieved by a suitable geometrical interface tilting of almost non-interacting FeCo segments with respect to the nanowire axis, together with the relative orientation of the perpendicular magnetic field. The proper design of the segments' geometry (e.g. tilting) in cylindrical nanowires opens multiple opportunities for advanced nanotechnologies in 3D magnetic networks., Spanish Ministry of Science and Innovation under Projects MAT2016-76824-C3-1-R, PID2019-108075RB-C31/ AEI / 10.13039/501100011033 and PGC2018-097789-B-I00 and the Regional Government of Madrid under Project S2018/NMT-4321 NANOMAGCOST-CM. LA and MF acknowledge project RTI2018-095303-B-C53., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael|||0000-0002-4147-6668
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coy, Emerson|||0000-0002-4149-9720
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez-Olivella, Carles|||0000-0002-1656-2951
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Frontera, Carlos|||0000-0002-0091-4756
  • Aballe, Lucía|||0000-0003-1810-8768
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Fina, Ignasi|||0000-0003-4182-6194
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (ΔT* ∼ 20 °C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of pre-defined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the promotion of catalytic reactions by surface acoustic waves

  • von Boehn, Bernhard|||0000-0003-3722-5767
  • Foerster, Michael|||0000-0002-4147-6668
  • von Boehn, Moritz
  • Prat Albert, Jordi|||0000-0002-9708-4831
  • Macià, Ferran|||0000-0001-5972-4810
  • Casals, Blai|||0000-0002-2941-1861
  • Khaliq, Muhammad Waqas|||0000-0002-9696-3498
  • Hernández-Mínguez, Alberto
  • Aballe, Lucía|||0000-0003-1810-8768
  • Imbihl, Ronald|||0000-0002-5155-7250
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis, sensor and nanotechnology. SAWs were shown to cause a strong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However, the promotion mechanism has not been unambiguously identified. Using stroboscopic X-ray photoelectron spectro-microscopy, we were able to evidence a sub-nanosecond work function change during propagation of 500 MHz SAWs on a 9 nm thick platinum film. We quantify the work function change to 455 μeV. Such a small variation rules out that electronic effects due to elastic deformation (strain) play a major role in the SAW-induced promotion of catalysis. In a second set of experiments, SAW-induced intermixing of a five monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be a major cause for catalytic promotion. Surface acoustic waves (SAWs) are dynamic lattice distortions, which can be excited on piezoelectric materials. For many years a promotion of the catalytic activity and selectivity by SAWs has been known, but no mechanistic understanding has been established yet. We quantify the effect that SAWs have on the electronic and geometric structure of a model catalyst, providing a basis for discussing the promotion mechanism of SAWs in catalytic surface reactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning the Néel temperature in an antiferromagnet, the case of NiCoO microstructures

  • Mandziak, Anna|||0000-0001-7033-7862
  • D. Soria, Guiomar
  • Prieto, José Emilio|||0000-0003-2092-6364
  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Granados-Miralles, Cecilia|||0000-0002-3679-387X
  • Quesada, Adrian
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • de la Figuera, Juan
We show that it is possible to tune the Néel temperature of nickel(II)-cobalt(II) oxide films by changing the Ni to Co ratio. We grow single crystalline micrometric triangular islands with tens of nanometers thickness on a Ru(0001) substrate using high temperature oxygen-assisted molecular beam epitaxy. Composition is controlled by adjusting the deposition rates of Co and Ni. The morphology, shape, crystal structure and composition are determined by low-energy electron microscopy and diffraction, and synchrotron-based x-ray absorption spectromicroscopy. The antiferromagnetic order is observed by x-ray magnetic linear dichroism. Antiferromagnetic domains up to micrometer width are observed.