Pasar al contenido principal

Sustainable Rare-Earth-Free Permanent Magnets: Enhancing the Structural and Magnetic Performance

FJC2018-035532-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FeCo nanowire−strontium ferrite powder composites for permanent magnets with high-energy products

  • Guzmán-Mínguez, J. C.
  • Ruiz-Gómez, Sandra
  • Vicente-Arche, L. M.
  • Granados-Miralles, Cecilia
  • Fernández-González, Claudia
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Erohkin, S.
  • Berkov, Dmitry
  • Mishra, D.
  • de Julián Fernández, C.
  • Fernández Lozano, José Francisco
  • Pérez, L.
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
Due to the issues associated with rare-earth elements, there arises a strong need for magnets with properties between those of ferrites and rare-earth magnets that could substitute the latter in selected applications. Here, we produce a high remanent magnetization composite bonded magnet by mixing FeCo nanowire powders with hexaferrite particles. In the first step, metallic nanowires with diameters between 30 and 100 nm and length of at least 2 μm are fabricated by electrodeposition. The oriented as-synthesized nanowires show remanence ratios above 0.76 and coercivities above 199 kA/m and resist core oxidation up to 300 °C due to the existence of a >8 nm thin oxide passivating shell. In the second step, a composite powder is fabricated by mixing the nanowires with hexaferrite particles. After the optimal nanowire diameter and composite composition are selected, a bonded magnet is produced. The resulting magnet presents a 20% increase in remanence and an enhancement of the energy product of 48% with respect to a pure hexaferrite (strontium ferrite) magnet. These results put nanowire−ferrite composites at the forefront as candidate materials for alternative magnets for substitution of rare earths in applications that operate with moderate magnet performance., We would like to thank Dr. Vić tor Fuertes for his advice on the processing of the bonded magnets. This work is supported by the Spanish Ministerio de Economía y Competitividad y Ministerio de Ciencia e Innovación (Project Nos. MAT2017- 86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110- C2-2-P, MAT2017-87072-C4-2-P, RTI2018-095303-A-C52, and FIS2017-82415-R) and by the European Commission through Project H2020 (No. 720853; AMPHIBIAN). C.G.-M. acknowledges financial support from MICINN through the “Juan de la Cierva” Program (FJC2018-035532-I). A.Q. acknowledges financial support from MICINN through the “Ramón y Cajal” Program (RYC-2017-23320). The work also is funded by the Regional Government of Madrid (Project S2018/ NMT-4321; NANOMAGCOST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting the coercivity of SrFe12O19 nanocrystalline powders obtained using the citrate combustion synthesis method

  • Guzmán-Mínguez, J. C.
  • Moreno Arche, L.
  • Granados-Miralles, Cecilia
  • López-Sánchez, Jesús
  • Marín, Pilar
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
Strontium hexaferrite nanocrystalline powders were synthesized using a citrate combustion method and subsequently subjected to post-synthesis processing with the aim of tuning the micro-nanostructure to improve the magnetic properties. Firstly, the synthesis thermal treatments were optimized in order to minimize the formation of secondary phases, mainly hematite. Secondly, the as-synthesized powders were conditioned by a two-step process: ball milling in wet medium (ethanol) and high-speed mixing. The final processed powders exhibited a saturation magnetization of 74 emu g-1 and a coercivity of 6450 Oe. Following a low-temperature combustion synthesis, the coercivity is one of the largest values reported for strontium ferrites. The combination of the two-step conditioning procedure results in a useful methodology to obtain SrFe12O19 nanocrystalline powders with competitive properties. The morphological, structural and magnetic properties of the processed material make it a promising candidate for hard-soft ferrite-based composite magnets, where large coercivity values are highly desirable., This work is supported by the Spanish Ministerio de Ciencia e Innovación through Project Nos. MAT2017-86450-C4-1-R, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52, and FIS2017-82415-R and through the Ramón y Cajal Contract RYC-2017-23320; and by the European Commission through Project H2020 No. 720853 (AMPHIBIAN). The work is funded as well by the Regional Government of Madrid through Project S2018/NMT-4321 (NANOMAGCOST). C G-M acknowledges financial support from MICINN through the ‘Juan de la Cierva’ Program (FJC2018-035532-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CoSb3-based skutterudite nanocomposites prepared by cold sintering process with enhanced thermoelectric properties

  • Serrano Rubio, Aída
  • Caballero-Calero, Olga
  • Granados-Miralles, Cecilia
  • Gorni, Giulio
  • Manzano, Cristina V.
  • Rull Bravo, Marta
  • Moure Arroyo, Alberto
  • Martín-González, Marisol
  • Fernández Lozano, José Francisco
[EN] We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb-based thermoelectric materials. CSP at 150 °C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %, which is increased to around 92 % after a post-annealing at temperatures ≥ 500 °C in Ar atmosphere. The reported CSP produces Te doped-CoSb nanocomposites with similar morphological and structural characteristics to the starting nanopowders obtained by ball milling in air atmosphere. The post-thermal treatment induces grain coalescence and grain growth, crystallite size growth as well as compositional changes in the nanocomposite, decreasing the amount of the main phase, CoSb, and increasing the weight of secondary phase, CoSb, up to a 30 wt% at 600 °C. Remarkably, the average valence for the Co, Sb and Te absorbing atoms is neither transformed by the sintering process nor by the subsequent heat treatment. The functional response of the sintered thermoelectric nanocomposites exhibits a maximum figure of merit of 0.12(3) at room temperature for the nanocomposites sintered by CSP with a subsequent post-annealing at 500 °C. This is mainly due to its low thermal conductivity in comparison with similar powders sintered by other approaches, and it is explained by the morphological and structural properties. These findings represent an attractive alternative for obtaining efficient thermoelectric skutterudites by a scalable and cost-effective route., This work has been supported by the Ministerio Español de Ciencia e Innovación (MICINN) through the projects MAT2017-86540-C4-1-R, MAT2017-86540-C4-3-R, RTI2018-095303-A-C52, PID2020-114192RB-C41 and PID2020-118430GB-100. Part of these experiments were performed at the CLAESS-BL22 beamline at ALBA Synchrotron (Grant no. 2020094658) and in collaboration with ALBA staff. A.S. and C.V.M. acknowledge financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” Contract no. 2017-t2/IND5395 and 2019-t1/IND-13541, respectively. C.G.-M. acknowledges financial support from MICINN through the “Juan de la Cierva” program (FJC2018-035532-I). A.M. is indebted to MICINN for the “Ramón y Cajal” contract (RYC-2013-14436), which is co-financed with European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-depth investigations of size and occupancies in cobalt ferrite nanoparticles by joint Rietveld refinements of X-ray and neutron powder diffraction data

  • Henry, Killian
  • Ahlburg, Jakob V.
  • Andersen, Henrik L.
  • Granados-Miralles, Cecilia
  • Stingaciu, Marian
  • Saura-Múzquiz, Matilde
  • Christensen, Mogens
[EN] Powder X-ray diffraction (PXRD) and neutron powder diffraction (NPD) have been used to investigate the crystal structure of CoFe2O4 nanoparticles prepared via different hydro­thermal synthesis routes, with particular attention given to accurately determining the spinel inversion degrees. The study is divided into four parts. In the first part, the investigations focus on the influence of using different diffraction pattern combinations (NPD, Cu-source PXRD and Co-source PXRD) for the structural modelling. It is found that combining PXRD data from a Co source with NPD data offers a robust structural model. The second part of the study evaluates the reproducibility of the employed multipattern Rietveld refinement procedure using different data sets collected on the same sample, as well as on equivalently prepared samples. The refinement procedure gives reproducible results and reveals that the synthesis method is likewise reproducible since only minor differences are noted between the samples. The third part focuses on the structural consequences of (i) the employed heating rate (achieved using three different hydro­thermal reactor types) and (ii) changing the cobalt salt in the precursors [aqueous salt solutions of Co(CH3COOH)2, Co(NO3)2 and CoCl2] in the synthesis. It is found that increasing the heating rate causes a change in the crystal structure (unit cell and crystallite sizes) while the Co/Fe occupancy and magnetic parameters remain similar in all cases. Also, changing the type of cobalt salt does not alter the final crystal/magnetic structure of the CoFe2O4 nanoparticles. The last part of this study is a consideration of the chemicals and parameters used in the synthesis of the different samples. All the presented samples exhibit a similar crystal and magnetic structure, with only minor deviations. It is also evident that the refinement method used played a key role in the description of the sample., Support from the Carlsberg Foundation (grant Nos. CF16-0084, CF18-0519 and CF19-0143). CG-M acknowledges financial support from MICINN through the ‘Juan de la Cierva’ Program (FJC2018-035532-I). JVA acknowledges financial support from Nordforsk (project No. 106874). We thank the Danish Agency for Science,Technology and Innovation for funding the instrument center DanScatt (7129-00003B)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel one-pot sol-gel synthesis route of Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix

  • Castellano-Soria, Alberto
  • López-Sánchez, Jesús
  • Granados-Miralles, Cecilia
  • Varela, María
  • Navarro, Elena
  • González, César
  • Marín, Pilar
[EN] Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix are synthesized by a novel two-step surfactant sol-gel strategy, where the processes of hydrolysis, polycondensation and drying take place in a one-pot. The present approach is based on the combined action of oleic acid and oleylamine, which act sterically on the precursor micelles when a densification temperature is performed in a reducing atmosphere. The structural and magnetic evolution of the formed compounds is investigated, ranging from iron oxides such as Fe3O4 and FeO, to the formation of pure Fe3C/C samples from 700 ºC onwards. Interestingly, Fe3C nanoparticles with a size of ~20 nm crystallize immersed in the carbon matrix and the surrounding environment forms an oriented encapsulation built by few-layered graphene. The nanostructures show a saturation magnetization of ~43 emu/g and a moderate coercivity of ~500 Oe. Thereby, an innovative chemical route to produce single phase Fe3C nanoparticles is described, and an effective method of few-layered graphene passivation is proposed, yielding a product with a high magnetic response and high chemical stability against environmental corrosion., Ministerio de Ciencia de Innovación (MCINN), Spain, through the projects: MAT2015–65445-C2–1-R, MAT2017–86450-C4–1-R, MAT2015–67557-C2–1-P, RTI2018–095856-B-C21, RTI2018–095303-A-C52, PIE: 2021-60-E030, PIE: 2010–6-OE-013; and Comunidad de Madrid, Spain, by S2013/MIT-2850 NANOFRONTMAG and S2018/NMT-4321 NANOMAGCOST. The authors are also grateful for the electron microscopy characterization performed in the Centro Nacional de Microscopía Electrónica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM), support from MCINN grant # RTI2018–097895-B-43. C.G.-M. acknowledges the financial support from MICINN through the “Juan de la Cierva” Program (FJC2018–035532-I).