Pasar al contenido principal

FUNCTIONAL CERAMICS AND ELECTROCERAMICS FOR INDUSTRIAL APPLICATIONS: RESEARCH AND DEVELOPMENT OF PRODUCTS FOR MARKET

RYC-2013-14436

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting

  • Moure, A.
  • Izquierdo Rodríguez, M.A.
  • Hernández Rueda, S.
  • Gonzalo Martín, Alicia
  • Rubio-Marcos, F.
  • Urquiza Cuadros, D.
  • Pérez-Lepe, A.
  • Fernandes, J.F.
Piezoelectric cymbals with 29-mm diameter and different configurations are fabricated and tested to determine the best conditions to optimize the conversion of mechanical to electric energy. Then, the ones with the best results are integrated directly in asphalt to evaluate their performance as vibration energy harvesters in roads, in a test bench designed to characterize these parameters. The main cymbal parameters and their integration in the asphalt are determined. For the first time, the electrical energy that can be obtained with the embedment of cymbals in asphalt is evaluated. Each single piezoceramic cymbal recovers up to 16 mu W for the pass of one heavy vehicle wheel. An extrapolation of the energy transformed by the integrated cymbals in roads with high vehicle densities, such as in a peri-urban motorway, is approached. Energy densities in the range of 40-50 MW h/m(2) can be obtained at 100 m of road (use of 30,000 cymbals), which could account for more than 65 MW h in a year. All this with a relatively low cost for an emerging technology (less than 2 (sic)/kW h). The conversion of wasted and unused vibrational energy in roads by piezoelectric cymbals is thus proved as a real possibility of energy harvesting., The authors are grateful to MINECO Project MAT2013-48009-C4-1-P for the financial support provided for this research. Dr. F. Rubio-Marcos is also indebted to MINECO for a “Juan de la Cierva” contract (Ref. JCI-2012-14521), which is co-financed with European Social Fund. Dr. Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (Ref. RYC-2013-14436), which is co-financed with European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Review and Perspectives of Aurivillius Structures as a Lead-Free Piezoelectric System

  • Moure Arroyo, Alberto
According to the EU-Directives 2002/95/EC, 2002/96/EC, lead-based piezoceramics must be substituted in the future with more environmentally friendly alternatives, only when a reliable alternative is found. This is why an increasing interest has grown in the research community to find lead free piezoelectric materials that fulfil the requirements for this substitution. Different families of compounds have been shown to be possible candidates for this use, such as bismuth and niobates based perovskites, pyrochlores, etc. However, a material with piezoelectric coefficients similar to those of PZT (lead zirconate titanate, Pb[Zr<sub>x</sub>Ti<sub>1-x</sub>]O<sub>3</sub>) has not been yet found. Besides, each of these families has its specific characteristics in terms of remnant polarization, coercive field or application temperature. Thus, the choice of each material should be made according to the specific needs of the application. In this sense, Aurivillius-type structure materials (also known as Bismuth Layered Structure Ferroelectrics, BLSF) can take advantage of their specific properties for uses as Lead Free Piezoelectric systems. Some of them have a high Curie temperature, which make them good candidates to be used as high temperature piezoelectrics; high coercive fields, which facilitates their use as actuators; or a high switching fatigue resistance, which can be useful for future applications as Ferroelectric Random Access Memories (FERAM)., Alberto Moure is indebted to MINECO for the “Ramon y Cajal” contract (Ref. RYC-2013-14436), which is co-financed with European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric Skutterudite/oxide nanocomposites: Effective decoupling of electrical and thermal conductivity by functional interfaces

  • Moure Arroyo, Alberto
  • Rull Bravo, Marta
  • Abad Mayor, Begoña
  • Campo, Ángel Adolfo del
  • Muñoz Rojo, Miguel
  • Aguirre, Myriam H.
  • Jacquot, Alexandre
  • Fernández Lozano, José Francisco
  • Martín-González, Marisol
Nanocomposites that combine percolated nano-CoSb3 semiconductors with isolated nano-oxide clusters are shown as an effective approach to decouple electrical and thermal conductivity in thermoelectric applications through the formation of functional interfaces. This type of decoupling is very important to increase the Figure of Merit (zT) of thermoelectrics and it is one of the greatest challenges searched by the community. We carry out an innovative synthesis of Skutterudite/oxide nanocomposites in air by high energy milling and sintering by Spark Plasma Sintering, where functional interfaces are developed in situ. A confocal Raman Microscopy study evidences unequivocally the appearance of a space charge layer at the Skutterudite/oxide interfaces characterized by a crystal lattice softening and a surprising enhanced Raman signal. The functional interfaces act as highly effective phonon scattering and trapping centers that highly reduce the thermal conductivity, while a high electrical conductivity is achieved by selective doping the Skutterudite phase. This approach leads to Figures of Merit ca. 1 for Te-doped CoSb3. This work opens up new possibilities for the facile, large scale synthesis of well performing thermoelectric materials for medium range temperatures applications., This work was supported by the European Projects “NEXTEC” FP7-NMP-201-1.2-3 and Thermo-Spintronic FP7-PEOPLE-2011-Marie Curie, CIG project N° 304043.A. M. and J. F. F. are grateful to MICINN project MAT2013-48009-C4-1-P for the financial support provided for this research. M.M.G. wants to acknowledge also the Infante project 201550E072. Dr. Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (Ref. RYC-2013–14436), which is co-financed with European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CoSb3-based skutterudite nanocomposites prepared by cold sintering process with enhanced thermoelectric properties

  • Serrano Rubio, Aída
  • Caballero-Calero, Olga
  • Granados-Miralles, Cecilia
  • Gorni, Giulio
  • Manzano, Cristina V.
  • Rull Bravo, Marta
  • Moure Arroyo, Alberto
  • Martín-González, Marisol
  • Fernández Lozano, José Francisco
[EN] We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb-based thermoelectric materials. CSP at 150 °C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %, which is increased to around 92 % after a post-annealing at temperatures ≥ 500 °C in Ar atmosphere. The reported CSP produces Te doped-CoSb nanocomposites with similar morphological and structural characteristics to the starting nanopowders obtained by ball milling in air atmosphere. The post-thermal treatment induces grain coalescence and grain growth, crystallite size growth as well as compositional changes in the nanocomposite, decreasing the amount of the main phase, CoSb, and increasing the weight of secondary phase, CoSb, up to a 30 wt% at 600 °C. Remarkably, the average valence for the Co, Sb and Te absorbing atoms is neither transformed by the sintering process nor by the subsequent heat treatment. The functional response of the sintered thermoelectric nanocomposites exhibits a maximum figure of merit of 0.12(3) at room temperature for the nanocomposites sintered by CSP with a subsequent post-annealing at 500 °C. This is mainly due to its low thermal conductivity in comparison with similar powders sintered by other approaches, and it is explained by the morphological and structural properties. These findings represent an attractive alternative for obtaining efficient thermoelectric skutterudites by a scalable and cost-effective route., This work has been supported by the Ministerio Español de Ciencia e Innovación (MICINN) through the projects MAT2017-86540-C4-1-R, MAT2017-86540-C4-3-R, RTI2018-095303-A-C52, PID2020-114192RB-C41 and PID2020-118430GB-100. Part of these experiments were performed at the CLAESS-BL22 beamline at ALBA Synchrotron (Grant no. 2020094658) and in collaboration with ALBA staff. A.S. and C.V.M. acknowledge financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” Contract no. 2017-t2/IND5395 and 2019-t1/IND-13541, respectively. C.G.-M. acknowledges financial support from MICINN through the “Juan de la Cierva” program (FJC2018-035532-I). A.M. is indebted to MICINN for the “Ramón y Cajal” contract (RYC-2013-14436), which is co-financed with European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting

  • Moure Arroyo, Alberto
  • Izquierdo Rodríguez, M.A.
  • Hernández Rueda, S.
  • Gonzalo, A.
  • Rubio Marcos, Fernando
  • Urquiza Cuadros, D.
  • Pérez-Lepe, A.
  • Fernández Lozano, José Francisco
[EN] Piezoelectric cymbals with 29-mm diameter and different configurations are fabricated and tested to determine the best conditions to optimize the conversion of mechanical to electric energy. Then, the ones with the best results are integrated directly in asphalt to evaluate their performance as vibration energy harvesters in roads, in a test bench designed to characterize these parameters. The main cymbal parameters and their integration in the asphalt are determined. For the first time, the electrical energy that can be obtained with the embedment of cymbals in asphalt is evaluated. Each single piezoceramic cymbal recovers up to 16 μW for the pass of one heavy vehicle wheel. An extrapolation of the energy transformed by the integrated cymbals in roads with high vehicle densities, such as in a peri-urban motorway, is approached. Energy densities in the range of 40-50 MW h/m can be obtained at 100 m of road (use of 30,000 cymbals), which could account for more than 65 MW h in a year. All this with a relatively low cost for an emerging technology (less than 2 €/kW h). The conversion of wasted and unused vibrational energy in roads by piezoelectric cymbals is thus proved as a real possibility of energy harvesting., MINECO project MAT2013-48009-C4-1-P for the financial support provided for this research. Dr. F. Rubio-Marcos is also indebted to CSIC for a “Junta de Ampliación de Estudios” contract (ref. JAEDOC071), which is co-financed with FEDER funds. Dr. Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (Ref. RYC-2013-14436).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poling and depoling influence on the micro-stress states and phase coexistence in KNN-based piezoelectric ceramics

  • Val-Gómez, P.
  • Campo, Ángel Adolfo del
  • Rubio Marcos, Fernando
  • Fernández Lozano, José Francisco
  • Moure Arroyo, Alberto
[EN] In this work a microstructural qualitative and quantitative study of spatial stress distributions in modified KNN ceramics (KNaLi)Co (NbTaSb)O, according to the polarization state is shown. X-ray diffraction reflects a perovskite crystalline structure with coexistence of Tetragonal and Orthorhombic phases (T/O). Confocal Raman microscopy shows that these crystalline phases are distributed in randomly micrometric regions through the ceramic volume. Tetragonal regions show higher piezoelectric coefficient and exhibit a higher micro-stress that hardens the ferroelectric response. By the contrary, the occurrence of orthorhombic micro-regions softened the ferroelectric behavior and reduced their piezoelectric coefficients. The ferroelectric response of ceramics is studied, where poling is also shown as a factor that affects the spatial micro-stress distributions. Finally, a model that relates the results obtained by Raman characterization with the ferroelectric properties and stress states is proposed., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the projects MAT2017-86450-C4-1-R, and the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. Dr. Alberto Moure and Dr. F. Rubio-Marcos are indebted to MINECO for a ‘Ramon y Cajal’ contracts (ref: RYC-2013-14436 and RyC-2015-18626 respectively), which are co-financed by the European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stress dynamics during O-T phase transitions in lead-free KNN-based piezoelectric ceramics

  • Moure Arroyo, Alberto
  • Val-Gómez, P.
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
[EN] In this study, we have investigated the stress dynamics arising from the Orthorhombic-Tetragonal Polymorphic Phase Boundary (PPB) in lead-free potassium sodium niobate (KNN)-based ceramics and its temperature dependence, as a means to elucidate the characteristics of PPBs in lead-free piezoelectric oxides. The dynamics are dictated by the phase transitions that occur upon cooling from the cubic phase and the coexistence of different crystal structures. Our findings reveal that the growth of Orthorhombic phases is constrained by the high-temperature tetragonal phase distributions. In particular, it is evidenced that two main mechanisms regulate the decrease of stress processes in which structural and microstructural effects are correlated; the first one is associated to a purely microstructural effect in which bimodal grain distribution hinders the formation of non-180° domains. By contrast, the second is mainly governed by ferroelectric domain distribution and the occurrence of pseudo-cubic regions around room temperature associated with local structural heterogeneity (that is, polar nano regions, PNRs). Specifically, these mechanisms generate regions with different stress state and explain the widening of the phase transition due the phase coexistence., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project PID2020-114192RB-C41. Dr. Alberto Moure is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RYC-2013-14436), which is co-financed by the European Social Fund. F.R-M. also acknowledges financial support from Comunidad de Madrid for an “Doctorados In-dustriales” proyect (IND2020/IND-17375), which is co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Operando multiscale characterization of press-fit diodes as a pathway to improve their reliability, Caracterización multiescala de diodos rectificadores en condiciones de operación para mejorar su fiabilidad

  • Román-Sánchez, Sara
[EN] Silicon-based press-fit rectifier diodes play a crucial role in the automotive industry, but the mismatch between components may cause differences in their thermoelastic response and thus lead to the appearance of interfacial stress within the device in operando conditions at high temperatures. This thesis presents an exhaustive study of the behavior of various commercial Si-based press-fit rectifier diodes with different features and under different conditions. For that, a multiscale evaluation of the devices was performed by several advanced characterization methods, standing out techniques such as infrared thermography (IRT), confocal Raman microscopy (CRM) and single-crystal X-ray diffraction (SCXRD). Macroscopic thermal characterization revealed great differences in heat release between press-fit diodes, evaluating different designs and technologies during forward and reverse polarization. A reliability study based on those results, design and manufacturing process modifications were proposed and implemented by one of the commercial suppliers to improve the performance of the diodes. Microscopic and submicroscopic characterization of specific localized regions within the active Si semiconductor of the press-fit rectifier diodes was performed by ex-situ and in-operando studies enabled the semi-quantification of the different phenomena occurring at forward polarization conditions, as thermoelastic stresses and carrier dynamics, particularly at the semiconductor/solder interfaces Thus, this thesis provides a comprehensive analysis of the main parameters affecting the reliability of press-fit rectifier diodes for automotive applications. The findings highlight the importance of thermal release management and how crucial it is to optimize the design and manufacturing processes of the diodes to increase their useful lifetime. These insights will contribute to the development of more efficient press-fit rectifier diodes, ultimately improving the reliability of automotive mechanical to electrical transformation systems., [ES] Los diodos rectificadores de tipo press-fit basados en silicio desempeñan un papel crucial en la industria del automóvil. Sin embargo, el desacoplo termomécánico entre los componentes puede provocar diferencias en su respuesta termoelástica y, en consecuencia, la aparición de tensiones interfaciales dentro del dispositivo en condiciones operativas a altas temperaturas. Esta tesis presenta un estudio exhaustivo del comportamiento de diversos diodos rectificadores de tipo press-fit basados en silicio con diferentes características y bajo distintas condiciones. Para ello, se llevó a cabo una evaluación a múltiples escalas de los dispositivos mediante varios métodos avanzados de caracterización, destacando técnicas como la termografía infrarroja (IRT), la microscopía confocal Raman (CRM) y la difracción de rayos X de monocristal (SCXRD). La caracterización térmica macroscópica reveló grandes diferencias en la disipación de calor entre los diodos press-fit, evaluando distintos diseños y tecnologías durante la polarización directa e inversa. A partir de un estudio de fiabilidad basado en estos resultados, se propusieron y aplicaron modificaciones en el diseño y el proceso de fabricación por parte de uno de los proveedores comerciales para mejorar el rendimiento de los diodos. La caracterización microscópica y submicroscópica de regiones localizadas específicas dentro del semiconductor de silicio activo de los diodos rectificadores se realizó mediante estudios ex-situ y en condiciones de operación operando, lo que permitió la semicuantificación de los diferentes fenómenos que ocurren en condiciones de polarización directa, como las tensiones termoelásticas y la dinámica de los portadores, particularmente en las intercaras semiconductor/soldadura. Por lo tanto, esta tesis proporciona un análisis integral de los principales parámetros que afectan la fiabilidad de los diodos rectificadores de tipo press-fit para aplicaciones en automóviles. Los resultados destacan la importancia de la disipación térmica y subrayan la necesidad de optimizar los procesos de diseño y fabricación de los diodos para aumentar su vida útil. Estos conocimientos contribuirán al desarrollo de diodos press-fit más eficientes, mejorando así la fiabilidad de los sistemas de transformación mecánica a eléctrica dentro del campo de la automoción., Esta Tesis Doctoral ha sido realizada en el departamento de Electrocerámica del Instituto de Cerámica y Vidrio (ICV), Consejo Superior de Investigaciones Científicas (CSIC), y desarrollada en el marco del proyecto Functional Alternator Rectifier Diodes (FARDIO) financiado por la empresa SEG Automotive Germany, GmbH (Alemania). El desarrollo de este trabajo también fue posible gracias a los proyectos PID2021-124585NB-C33 y PID2020- 114192RB-C41 financiados por MCIN/AEI/10.13039/501100011033 y la ayuda RYC-2013-14436 financiada por MCIN/AEI/10.13039/501100011033 y RYC2021- 031236-I financiada por MCIN/AEI/10.13039/501100011033 y por la “Unión Europea NextGenerationEU/PRTR”. Se agradece también a The European Synchrotron Radiation Facility (The ESRF) y el CSIC por la financiación de los experimentos: A25-02-940, A25-02-997, A25- 02-1030, MA-5391 y A25-02-1074, así como al Centro de Microanálisis de Materiales (CMAM), de la Universidad Autónoma de Madrid (UAM) por la financiación de los experimentos IMP019/22 y IMP013/23., The publications included in this thesis are listed in: 1. A. Moure, A. Serrano, S. Román-Sánchez, I. Lorite, J. F. Fernández, Influence of the design on the thermal response of press-fit diodes: An infrared thermographic study, Results Phys. 22 (2021) 103909. https://doi.org/10.1016/j.rinp.2021.103909 2. A. Moure, S. Román-Sánchez, A. Serrano, I. Lorite, J. F. Fernández, In-situ thermal runaway of Si-based press-fit diodes monitored by infrared thermography, Results Phys. 19 (2020) 103529. https://doi.org/10.1016/j.rinp.2020.103529 3. S. Román-Sánchez, M. París Ogáyar, I. Lorite, J. F. Fernández, A. Serrano, A. Moure, Improving the reliability of silicon diodes via manufacturing process modification strategies, J. Mater. Res. Technol. 28 (2024) 3882-3891. https://doi.org/10.1016/j.jmrt.2023.12.155 4. S. Román-Sánchez, A. Serrano, A. del Campo, I. Lorite, J. F. Fernández, A. Moure, Thermal response of active Si in press-fit rectifier diodes by confocal Raman microscopy: Influence of diode design and technology, J. Mater. Res. Technol. 18 (2022) 2570-2581. https://doi.org/10.1016/j.jmrt.2022.03.116 5. S. Román-Sánchez, A. Moure, J. López-Sánchez, J. Rubio-Zuazo, A. del Campo, R. Calvo, I. Lorite, J. F. Fernández, A. Serrano, Structural impact in Si-based diodes with PNjunction technology under operating conditions, submitted. 6. S. Román-Sánchez, A. Moure, A. del Campo, I. Lorite, J. F. Fernández, A. Serrano, Assessment of thermo-mechanical phenomena in Si-based diodes via operando confocal Raman microscopy, Measurement. 229 (2024) 114425. https://doi.org/10.1016/j.measurement.2024.114425, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ thermal runaway of Si-based press-fit diodes monitored by infrared thermography

  • Moure Arroyo, Alberto
  • Román-Sánchez, Sara
  • Serrano Rubio, Aída
  • Lorite, Israel
  • Fernández Lozano, José Francisco
Overvoltage is one of the main causes that lead to the failure of electronic devices. This makes fundamental to understand the electrical and thermal mechanisms engaged in the process. In this work, the influence of the semiconductor technology on the thermal runaway involved in the dielectric breakdown of commercial press-fit diodes, operating in reverse conditions, has been studied. Infrared thermography has been used to monitor the temperature evolution before, during and after the failure. Schottky and Metal oxide semiconductor devices, based on Si, have been evaluated following this methodology. The current flowing through the diode causes its temperature to rise, which increases the current with a further increase in temperature that triggers the avalanche process. The diode configuration conditions the heating associated with the spark appearing during the breakdown. This process is faster for Schottky diodes than for Metal oxide semiconductors, leading to higher temperatures. Besides, mechanical breaking is observed in the semiconductor due to the stresses generated during the fast heating-cooling processes after the different breakdowns events. The reached temperatures are enough to melt the solder that creates an electrical path, which short-circuits the diodes and leads to their final failure. These differences in the failure behavior must be taken into account to choose the adequate technology in practical applications. © 2020 Elsevier B.V., All rights reserved., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project MAT2017-86450-C4-1-R and RTI2018-095303-A-C52. Dr. Alberto Moure is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RYC-2013-14436), which is co-financed by the European Social Fund. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395). The authors acknowledge to Marta Furio for the CT-scan measurements at the “Museo Nacional de Ciencias Naturales”., Appendix A. Supplementary data at DOI: https://doi.org/10.1016/j.rinp.2020.103529, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the design on the thermal response of press-fit diodes: An infrared thermographic study

  • Moure Arroyo, Alberto
  • Serrano Rubio, Aída
  • Román-Sánchez, Sara
  • Lorite, Israel
  • Fernández Lozano, José Francisco
A critical effect in the field of the power semiconductors is their heating processes under high currents regime, in the order of amperes. The thermal characterization in working conditions is not always an easy task, and its over/underestimation can lead to failures in the design of the devices. Infrared thermography measurements are shown in this work as a valuable tool to determine the temperature mapping, profiles and heating and cooling rates of diodes under working conditions. Press-fit metal-oxide semiconductors commercial diodes with different designs from two different suppliers have been analyzed. This work provides elements that relate the dissipated power and the release of heat with the design. © 2021 Elsevier B.V., All rights reserved., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project MAT2017-86450-C4-1-R and RTI2018-095303-A-C52. Dr. Alberto Moure is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RYC-2013-14436), which is co-financed by the European Social Fund. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal response of active Si in press-fit rectifier diodes by confocal Raman microscopy: Influence of diode design and technology

  • Román-Sánchez, Sara
  • Serrano Rubio, Aída
  • Campo, Ángel Adolfo del
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Moure Arroyo, Alberto
Overheating resulting from the circulation of high electric currents (in the order of tens of amperes) that some electronic devices undergo when they are in operation, can induce structural modifications such as mechanical stresses that could reduce their lifetime. In order to optimize their performance, understanding the phenomenology that takes place in devices at high-temperature regimen induced under operating conditions is fundamental. In this work, the thermal behavior of the Si-based semiconductor part of several press-fit rectifier diodes with different design and technology (Schottky, Metal Oxide Semiconductor and PN junction) has been studied by Confocal Raman Microscopy. The experiments have been performed on two specific functional parts of the active Si chip (i.e., near and far from the Si/electrode interface), discerning non-thermal effects such as stress and doping from the purely thermal ones with a specific analysis procedure of the Si T2g Raman active mode. This methodology enables an advance, non-destructive and located characterization of the thermal response of the diodes, which will help to optimize the performance of electronic devices and extend their useful life and reliability by avoiding or, at least, minimizing the damage caused by the temperature excess. © 2022 Elsevier B.V., All rights reserved., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project RTI2018-095303-A-C52 and PID2020-114192RB-C41. S.R.-S. acknowledges the financial support from FARDIO project to SEG Automotive Germany GmbH. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395). Dr. A.M. is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RYC-2013-14436), which is co-financed by the European Social Fund., Appendix A. Supplementary data The following is/are the supplementary data to this article DOI: https://doi.org/10.1016/j.jmrt.2022.03.116, Peer reviewed