Pasar al contenido principal

CERAMIC MATERIALS: FROM BASIC CONCEPTS TO APPLICATIONS

RYC-2015-18626

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring new mechanisms for effective antimicrobial materials: Electric contact-killing based on multiple schottky barriers

  • Lucas-Gil, Eva de
  • Jiménez Reinosa, Julián
  • Neuhaus, Kerstin
  • Vera Londoño, Liliana Patricia
  • Martín-González, Marisol
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
The increasing threat of multidrug-resistance organisms is a cause for worldwide concern. Progressively microorganisms become resistant to commonly used antibiotics, which are a healthcare challenge. Thus, the discovery of new antimicrobial agents or new mechanisms different from those used is necessary. Here, we report an effective and selective antimicrobial activity of microstructured ZnO (Ms-ZnO) agent through the design of a novel star-shaped morphology, resulting in modulation of surface charge orientation. Specifically, we find that Ms-ZnO particles are composed of platelet stacked structure, which generates multiple Schottky barriers due to the misalignment of crystallographic orientations. We also demonstrated that this effect allows negative charge accumulation in localized regions of the structure to act as “charged domain walls”, thereby improving the antimicrobial effectiveness by electric discharging effect. We use a combination of field emission scanning electron microscopy (FE-SEM), SEM-cathodoluminescence imaging, and Kelvin probe force microscopy (KPFM) to determine that the antimicrobial activity is a result of microbial membrane physical damage caused by direct contact with the Ms-ZnO agent. It is important to point out that Ms-ZnO does not use the photocatalysis or the Zn2+ released as the main antimicrobial mechanism, so consequently this material would show low toxicity and robust stability. This approach opens new possibilities to understand both the physical interactions role as main antimicrobial mechanisms and insight into the coupled role of hierarchical morphologies and surface functionality on the antimicrobial activity., We express our thanks to the MINECO (Spain) Project MAT2013-48009-C4-1-P and the Spanish National Research Council (CSIC) under Project NANOMIND CSIC 201560E068 for financial support. F.R.-M. is also indebted to MINECO for a “Ramon y Cajal” Contract (Ref. RyC-2015-18626), which is cofinanced by the European Social Fund., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI). Proyecto 201560E068, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalous local lattice disorder and distortion in A2Mo2O7 pyrochlores

  • Castellano, C.
  • Berti, Giulia
  • Rubio Marcos, Fernando
  • Lamura, G.
  • Sanna, S.
  • Salas, Eduardo
  • Brambilla, A.
  • Muñoz-Noval, A.
  • Duò, L.
  • Demartin, F.
We present an extended X-ray absorption fine structure study of the pyrochlores AMoO (A = Gd, Dy, Ho, Er), as a function of temperature. While in the three spin-glass compositions DyMoO, HoMoO and ErMoO the Debye temperatures are in accordance with other pyrochlores and the static disorder contributions are compatible with a lattice frustration, in the low-temperature-ferromagnetic GdMoO system we point out an anomalous enhancement of the local structure disorder below about 225 K down to low temperatures. Moreover, considering the general pyrochlore predisposition towards structural disorder, we prove the presence on a local scale of at least a bimodal distribution of the Mo-O(1) octahedral interatomic distances for all the studied compounds, consisting of two shorter and four longer bond lengths. Our results suggest that the local structure order parameter plays an important role in the ferromagnetic or spin-glass phase stabilization., F.R.-M. is also indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund 2014-20.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards blue long-lasting luminescence of Eu/Nd-doped calcium-aluminate nanostructured platelets via the molten salt route

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Serrano Rubio, Aída
  • Salas, Eduardo
  • Hussainova, Irina
  • Fernández Lozano, José Francisco
Calcia-alumina binary compounds doped with rare earths and some transition metals cations show persistent luminescence from the visible to the infrared range. Specifically, the blue light can be obtained through the Eu2+ activator center in a potential host, such as dodecacalcium hepta-aluminate (Ca12Al14O33) and monocalcium aluminate (CaAl2O4). By doping with Nd3+, the persistent luminescence can be substantially prolonged; for this reason, the Eu/Nd pair is a potential choice for developing long-lasting blue luminescence. Herein, the phase evolution of the calcia-alumina system via molten salt synthesis is reported as a function of the synthesis temperature and the atmospheric environment. The fraction of CaAl2O4 phase increases when the temperature is higher. Synthesized microparticles of platelet-type morphology represent isolated nanostructured ceramic pieces. Under visible light, the particles are white. This indicates that the followed process solves the dark-gray coloring of phosphor when is synthesized in a reduced atmosphere at high temperature. As regards the synthesis mechanism, which is assisted by the molten flux, the dissolution−diffusion transport process is promoted at the surface of the alumina microparticles. In fact, the emission intensity can be modulated through the phase of the Eu-doped calcium-aluminate discrete platelets synthesized. Consequently, the photoluminescence intensity depends also on the oxidation state of the Eu ion. X-ray absorption near-edge structure and photoluminescence measurements corroborate the Eu reduction and the grain coarsening with the enhancement of the blue emission. The doped phosphors with Eu/Nd show a broad and strong absorption in the region of 320–400 nm and a broad emission band at around 440 nm when they are excited in this absorption range. From a broader perspective, our findings prove that the Ca12Al14O33 and CaAl2O4 phases open new opportunities for research into the design of blue long-lasting emitters for a wide range of fields from ceramic to optoelectronic materials., This work was supported by the Spanish Ministry of Science Innovation and Universities (MICIU) under the projects MAT2017-86450-C4-1-R and RTI2018-095303-A-C52, and the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. R.E.R.-H. acknowledges the financial support of the Mobilitas Pluss program in the framework of the MOBJD254 project. F.R.-M. is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. F.R.-M. also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395). The support of ETAG through PUT1063 (I. Hussainova) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Performance and Stability of Wet-Milled CoAl2O4, Ni/CoAl2O4, and Pt,Ni/CoAl2O4 for Soot Combustion

  • Álvarez-Docio, Carmen M.
  • Portela, Raquel
  • Jiménez Reinosa, Julián
  • Rubio Marcos, Fernando
  • Pascual, Laura
  • Fernández Lozano, José Francisco
[EN] Low-energy wet milling was employed to activate commercial CoAl2O4 spinel and disperse mono- and multimetallic nanoparticles on its surface. This method yielded efficient Pt,Ni catalysts for soot oxidation in simulated diesel exhaust conditions. The characterization and activity results indicated that although Ni/CoAl2O4 was highly active, the presence of Pt was required to obtain a stable Ni(0.25 wt. %),Pt(0.75 wt. %)/CoAl2O4 catalyst under the operating conditions of diesel particulate filters, and that hot spots formation must be controlled to avoid the deactivation of the cobalt aluminate. Our work provides important insight for new design strategies to develop high-efficiency low-cost catalysts. Platinum-containing multimetallic nanostructures could efficiently reduce the amount of the costly, but to date non-replaceable, Pt noble metal for a large number of industrially important catalytic processes, This research was funded by CSIC, NANOMIND project number CSIC201560E068, and the Spanish Government, grant number MAT2017-86450-C4-1-R projects. C.M.A.-D. received financial support from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) for an FPI grant BES-2014-069779, which is co-financed with FEDER funds. F.R.-M. is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. F.R.-M. also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators (BBVA Foundation).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poling and depoling influence on the micro-stress states and phase coexistence in KNN-based piezoelectric ceramics

  • Val-Gómez, P.
  • Campo, Ángel Adolfo del
  • Rubio Marcos, Fernando
  • Fernández Lozano, José Francisco
  • Moure Arroyo, Alberto
[EN] In this work a microstructural qualitative and quantitative study of spatial stress distributions in modified KNN ceramics (KNaLi)Co (NbTaSb)O, according to the polarization state is shown. X-ray diffraction reflects a perovskite crystalline structure with coexistence of Tetragonal and Orthorhombic phases (T/O). Confocal Raman microscopy shows that these crystalline phases are distributed in randomly micrometric regions through the ceramic volume. Tetragonal regions show higher piezoelectric coefficient and exhibit a higher micro-stress that hardens the ferroelectric response. By the contrary, the occurrence of orthorhombic micro-regions softened the ferroelectric behavior and reduced their piezoelectric coefficients. The ferroelectric response of ceramics is studied, where poling is also shown as a factor that affects the spatial micro-stress distributions. Finally, a model that relates the results obtained by Raman characterization with the ferroelectric properties and stress states is proposed., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the projects MAT2017-86450-C4-1-R, and the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. Dr. Alberto Moure and Dr. F. Rubio-Marcos are indebted to MINECO for a ‘Ramon y Cajal’ contracts (ref: RYC-2013-14436 and RyC-2015-18626 respectively), which are co-financed by the European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible optical control of macroscopic polarization in ferroelectrics

  • Rubio Marcos, Fernando
  • Ochoa, Diego A.
  • Campo, Ángel Adolfo del
  • García García-Tuñón, Miguel Ángel
  • Castro, Germán R.
  • Fernández Lozano, José Francisco
  • García, José E.
The optical control of ferroic properties is a subject of fascination for the scientific community, because it involves the establishment of new paradigms for technology<sup>1-9</sup>. Domains and domain walls are known to have a great impact on the properties of ferroic materials<sup>1-24</sup>. Progress is currently being made in understanding the behaviour of the ferroelectric domain wall, especially regarding its dynamic control<sup>10-12,17,19</sup>. New research is being conducted to find effective methodologies capable of modulating ferroelectric domain motion for future electronics. However, the practical use of ferroelectric domain wall motion should be both stable and reversible (rewritable) and, in particular, be able to produce a macroscopic response that can be monitored easily<sup>12,17</sup>. Here, we show that it is possible to achieve a reversible optical change of ferroelectric domains configuration. This effect leads to the tuning of macroscopic polarization and its related properties by means of polarized light, a non-contact external control. Although this is only the first step, it nevertheless constitutes the most crucial one in the long and complex process of developing the next generation of photo-stimulated ferroelectric devices., This work is supported by the Ministry of Economy, Industry and Competitiveness (MINECO, Spanish Government) project MAT2013-48009-C4-P and by the Spanish National Research Council (CSIC) under project NANOMIND CSIC 201560E068. The authors acknowledge ESRF, The European Synchrotron, CSIC, MINECO and the SpLine CRG BM25 beamline staff for provision of synchrotron radiation and assistance during XRD measurements. F.R.-M. acknowledges MINECO for a ‘Ramon y Cajal’ contract (RyC-2015-18626), co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-Induced Capacitance Tunability in Ferroelectric Crystals

  • Páez-Margarit, David
  • Rubio Marcos, Fernando
  • Ochoa, Diego A
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
  • García, José E
The remote controlling of ferroic properties with light is nowadays a hot and highly appealing topic in materials science. Here, we shed light on some of the unresolved issues surrounding light-matter coupling in ferroelectrics. Our findings show that the capacitance and, consequently, its related intrinsic material property, i.e., the dielectric constant, can be reversibly adjusted through the light power control. High photodielectric performance is exhibited across a wide range of the visible light wavelength because of the wavelength-independence of the phenomenon. We have verified that this counterintuitive behavior can be strongly ascribed to the existence of "locally free charges" at domain wall., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under projects MAT2017-86450-C4-1-R, and by the Spanish National Research Council (CSIC) under the project NANOMIND CSIC 201560E068. The authors thank Dr. Yudania Sánchez, at the Catalonia Institute for Energy Research (IREC), for help in ITO deposition. F. R-M. is also indebted to MINECO for a “Ramon y Cajal” contract (ref: RyC-2015-18626), which is cofinanced by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photo-Controlled Ferroelectric-Based Nanoactuators

  • Rubio Marcos, Fernando
  • Páez-Margarit, David
  • Ochoa, Diego A
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
  • García, José E
Finding a feasible principle for a future generation of nano-optomechanical systems is a matter of intensive research, because it may provide new device prospects for optoelectronics and nanomanipulation techniques. Here we show that the strain of a ferroelectric crystal can be manipulated to achieve macroscopic, stable, and reproducible dimensional changes using illumination with photon energy below the material bandgap. The photoresponse can be activated without direct light incidence on the actuation area, because the cooperative nature of the phenomenon extends the photoinduced strain to the whole material. These results may be useful for developing the next generation of high-efficiency photocontrolled ferroelectric devices., This work is supported by the MINECO (Spanish Government) project MAT2017-86450-C4-1-R. F.R-M is indebted to MINECO for a “Ramon y Cajal” contract (ref: RyC-2015-18626), which is cofinanced by the European Social Fund. F.R-M also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators (BBVA Foundation). The authors thank Dr. Trifon Trifonov (Barcelona Research Center in Multiscale Science and Engineering) for technical support in the profilometry measurements., Peer reviewed